blob: 1440d4ab6af9a9204870e2f90ae2ae5456214988 [file] [log] [blame]
Hans Verkuilb2f06482005-11-13 16:07:55 -08001/*
2 v4l2 common internal API header
3
4 This header contains internal shared ioctl definitions for use by the
5 internal low-level v4l2 drivers.
6 Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal
7 define,
8
9 Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl>
10
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 */
25
26#ifndef V4L2_COMMON_H_
27#define V4L2_COMMON_H_
28
Mauro Carvalho Chehab401998f2006-06-04 10:06:18 -030029#include <media/v4l2-dev.h>
30
Hans Verkuil7e8b09e2006-01-09 15:32:40 -020031/* v4l debugging and diagnostics */
32
Mauro Carvalho Chehab401998f2006-06-04 10:06:18 -030033/* Debug bitmask flags to be used on V4L2 */
34#define V4L2_DEBUG_IOCTL 0x01
35#define V4L2_DEBUG_IOCTL_ARG 0x02
36
Hans Verkuil7e8b09e2006-01-09 15:32:40 -020037/* Common printk constucts for v4l-i2c drivers. These macros create a unique
38 prefix consisting of the driver name, the adapter number and the i2c
39 address. */
40#define v4l_printk(level, name, adapter, addr, fmt, arg...) \
41 printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
42
Mauro Carvalho Chehabcab462f2006-01-09 15:53:26 -020043#define v4l_client_printk(level, client, fmt, arg...) \
Hans Verkuil7e8b09e2006-01-09 15:32:40 -020044 v4l_printk(level, (client)->driver->driver.name, (client)->adapter, \
45 (client)->addr, fmt , ## arg)
46
47#define v4l_err(client, fmt, arg...) \
48 v4l_client_printk(KERN_ERR, client, fmt , ## arg)
49
50#define v4l_warn(client, fmt, arg...) \
51 v4l_client_printk(KERN_WARNING, client, fmt , ## arg)
52
53#define v4l_info(client, fmt, arg...) \
54 v4l_client_printk(KERN_INFO, client, fmt , ## arg)
55
56/* These three macros assume that the debug level is set with a module
57 parameter called 'debug'. */
Mauro Carvalho Chehabf167cb42006-01-11 19:41:49 -020058#define v4l_dbg(level, debug, client, fmt, arg...) \
Hans Verkuil7e8b09e2006-01-09 15:32:40 -020059 do { \
60 if (debug >= (level)) \
61 v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
62 } while (0)
63
64/* Prints the ioctl in a human-readable format */
65extern void v4l_printk_ioctl(unsigned int cmd);
66
Mauro Carvalho Chehab41f38b42006-02-27 00:08:49 -030067/* Prints the ioctl and arg in a human-readable format */
68extern void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg);
69
Hans Verkuil7e8b09e2006-01-09 15:32:40 -020070/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
71#define v4l_print_ioctl(name, cmd) \
72 do { \
73 printk(KERN_DEBUG "%s: ", name); \
74 v4l_printk_ioctl(cmd); \
75 } while (0)
76
77/* Use this macro in I2C drivers where 'client' is the struct i2c_client
78 pointer */
79#define v4l_i2c_print_ioctl(client, cmd) \
80 do { \
81 v4l_client_printk(KERN_DEBUG, client, ""); \
82 v4l_printk_ioctl(cmd); \
83 } while (0)
84
85/* ------------------------------------------------------------------------- */
86
87/* Internal ioctls */
88
Hans Verkuilb2f06482005-11-13 16:07:55 -080089/* VIDIOC_INT_G_REGISTER and VIDIOC_INT_S_REGISTER */
90struct v4l2_register {
91 u32 i2c_id; /* I2C driver ID of the I2C chip. 0 for the I2C adapter. */
92 unsigned long reg;
93 u32 val;
94};
95
96/* VIDIOC_INT_DECODE_VBI_LINE */
97struct v4l2_decode_vbi_line {
98 u32 is_second_field; /* Set to 0 for the first (odd) field,
99 set to 1 for the second (even) field. */
100 u8 *p; /* Pointer to the sliced VBI data from the decoder.
101 On exit points to the start of the payload. */
102 u32 line; /* Line number of the sliced VBI data (1-23) */
103 u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */
104};
105
106/* VIDIOC_INT_G_CHIP_IDENT: identifies the actual chip installed on the board */
107enum v4l2_chip_ident {
108 /* general idents: reserved range 0-49 */
109 V4L2_IDENT_UNKNOWN = 0,
110
111 /* module saa7115: reserved range 100-149 */
Mauro Carvalho Chehabf5762e42006-03-13 13:31:31 -0300112 V4L2_IDENT_SAA7113 = 103,
Hans Verkuilb2f06482005-11-13 16:07:55 -0800113 V4L2_IDENT_SAA7114 = 104,
114 V4L2_IDENT_SAA7115 = 105,
115
116 /* module saa7127: reserved range 150-199 */
117 V4L2_IDENT_SAA7127 = 157,
118 V4L2_IDENT_SAA7129 = 159,
119
120 /* module cx25840: reserved range 200-249 */
Hans Verkuile2b8cf42006-04-22 10:22:46 -0300121 V4L2_IDENT_CX25836 = 236,
122 V4L2_IDENT_CX25837 = 237,
Hans Verkuilb2f06482005-11-13 16:07:55 -0800123 V4L2_IDENT_CX25840 = 240,
124 V4L2_IDENT_CX25841 = 241,
125 V4L2_IDENT_CX25842 = 242,
126 V4L2_IDENT_CX25843 = 243,
127};
128
Michael Krufky5e453dc2006-01-09 15:32:31 -0200129/* audio ioctls */
Hans Verkuil757d2502006-01-23 17:11:10 -0200130
131/* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */
Michael Krufky5e453dc2006-01-09 15:32:31 -0200132#define AUDC_SET_RADIO _IO('d',88)
Hans Verkuil757d2502006-01-23 17:11:10 -0200133
Michael Krufky5e453dc2006-01-09 15:32:31 -0200134/* tuner ioctls */
Hans Verkuil757d2502006-01-23 17:11:10 -0200135
Michael Krufky5e453dc2006-01-09 15:32:31 -0200136/* Sets tuner type and its I2C addr */
Hans Verkuil757d2502006-01-23 17:11:10 -0200137#define TUNER_SET_TYPE_ADDR _IOW('d', 90, int)
138
139/* Puts tuner on powersaving state, disabling it, except for i2c. To be replaced
140 by VIDIOC_INT_S_STANDBY. */
141#define TUNER_SET_STANDBY _IOW('d', 91, int)
142
Michael Krufky5e453dc2006-01-09 15:32:31 -0200143/* Sets tda9887 specific stuff, like port1, port2 and qss */
Hans Verkuil757d2502006-01-23 17:11:10 -0200144#define TDA9887_SET_CONFIG _IOW('d', 92, int)
145
146/* Switch the tuner to a specific tuner mode. Replacement of AUDC_SET_RADIO */
147#define VIDIOC_INT_S_TUNER_MODE _IOW('d', 93, enum v4l2_tuner_type)
148
149/* Generic standby command. Passing -1 (all bits set to 1) will put the whole
150 chip into standby mode, value 0 will make the chip fully active. Specific
151 bits can be used by certain chips to enable/disable specific subsystems.
152 Replacement of TUNER_SET_STANDBY. */
153#define VIDIOC_INT_S_STANDBY _IOW('d', 94, u32)
Michael Krufky5e453dc2006-01-09 15:32:31 -0200154
Hans Verkuilb2f06482005-11-13 16:07:55 -0800155/* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
156#define VIDIOC_INT_S_REGISTER _IOR ('d', 100, struct v4l2_register)
157#define VIDIOC_INT_G_REGISTER _IOWR('d', 101, struct v4l2_register)
158
159/* Reset the I2C chip */
160#define VIDIOC_INT_RESET _IO ('d', 102)
161
Hans Verkuil3578d3d2006-01-09 15:25:41 -0200162/* Set the frequency (in Hz) of the audio clock output.
Hans Verkuilb2f06482005-11-13 16:07:55 -0800163 Used to slave an audio processor to the video decoder, ensuring that audio
Hans Verkuil3578d3d2006-01-09 15:25:41 -0200164 and video remain synchronized.
165 Usual values for the frequency are 48000, 44100 or 32000 Hz.
166 If the frequency is not supported, then -EINVAL is returned. */
167#define VIDIOC_INT_AUDIO_CLOCK_FREQ _IOW ('d', 103, u32)
Hans Verkuilb2f06482005-11-13 16:07:55 -0800168
169/* Video decoders that support sliced VBI need to implement this ioctl.
170 Field p of the v4l2_sliced_vbi_line struct is set to the start of the VBI
171 data that was generated by the decoder. The driver then parses the sliced
172 VBI data and sets the other fields in the struct accordingly. The pointer p
173 is updated to point to the start of the payload which can be copied
174 verbatim into the data field of the v4l2_sliced_vbi_data struct. If no
175 valid VBI data was found, then the type field is set to 0 on return. */
176#define VIDIOC_INT_DECODE_VBI_LINE _IOWR('d', 104, struct v4l2_decode_vbi_line)
177
178/* Used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is
179 filled with the data packets that should be output. Note that if you set
Mauro Carvalho Chehab12db5602006-01-23 17:11:08 -0200180 the line field to 0, then that VBI signal is disabled. If no
181 valid VBI data was found, then the type field is set to 0 on return. */
Hans Verkuilb2f06482005-11-13 16:07:55 -0800182#define VIDIOC_INT_S_VBI_DATA _IOW ('d', 105, struct v4l2_sliced_vbi_data)
183
184/* Used to obtain the sliced VBI packet from a readback register. Not all
185 video decoders support this. If no data is available because the readback
186 register contains invalid or erroneous data -EIO is returned. Note that
187 you must fill in the 'id' member and the 'field' member (to determine
188 whether CC data from the first or second field should be obtained). */
Mauro Carvalho Chehab41f38b42006-02-27 00:08:49 -0300189#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data)
Hans Verkuilb2f06482005-11-13 16:07:55 -0800190
191/* Returns the chip identifier or V4L2_IDENT_UNKNOWN if no identification can
192 be made. */
Mauro Carvalho Chehab41f38b42006-02-27 00:08:49 -0300193#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident)
Hans Verkuilb2f06482005-11-13 16:07:55 -0800194
Mauro Carvalho Chehab9bb13a62006-01-09 15:25:37 -0200195/* Sets I2S speed in bps. This is used to provide a standard way to select I2S
196 clock used by driving digital audio streams at some board designs.
197 Usual values for the frequency are 1024000 and 2048000.
198 If the frequency is not supported, then -EINVAL is returned. */
199#define VIDIOC_INT_I2S_CLOCK_FREQ _IOW ('d', 108, u32)
200
Hans Verkuil757d2502006-01-23 17:11:10 -0200201/* Routing definition, device dependent. It specifies which inputs (if any)
202 should be routed to which outputs (if any). */
203struct v4l2_routing {
204 u32 input;
205 u32 output;
206};
207
208/* These internal commands should be used to define the inputs and outputs
Hans Verkuil8bf2f8e2006-03-18 21:31:00 -0300209 of an audio/video chip. They will replace the v4l2 API commands
210 VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT, VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT
211 that are meant to be used by the user.
212 The internal commands should be used to switch inputs/outputs
Hans Verkuil757d2502006-01-23 17:11:10 -0200213 because only the driver knows how to map a 'Television' input to the precise
214 input/output routing of an A/D converter, or a DSP, or a video digitizer.
215 These four commands should only be sent directly to an i2c device, they
216 should not be broadcast as the routing is very device specific. */
217#define VIDIOC_INT_S_AUDIO_ROUTING _IOW ('d', 109, struct v4l2_routing)
Mauro Carvalho Chehab41f38b42006-02-27 00:08:49 -0300218#define VIDIOC_INT_G_AUDIO_ROUTING _IOR ('d', 110, struct v4l2_routing)
Hans Verkuil757d2502006-01-23 17:11:10 -0200219#define VIDIOC_INT_S_VIDEO_ROUTING _IOW ('d', 111, struct v4l2_routing)
Mauro Carvalho Chehab41f38b42006-02-27 00:08:49 -0300220#define VIDIOC_INT_G_VIDEO_ROUTING _IOR ('d', 112, struct v4l2_routing)
Hans Verkuil757d2502006-01-23 17:11:10 -0200221
Hans Verkuilb7f82922006-04-02 12:50:42 -0300222struct v4l2_crystal_freq {
223 u32 freq; /* frequency in Hz of the crystal */
224 u32 flags; /* device specific flags */
225};
226
227/* Sets the frequency of the crystal used to generate the clocks.
228 An extra flags field allows device specific configuration regarding
229 clock frequency dividers, etc. If not used, then set flags to 0.
230 If the frequency is not supported, then -EINVAL is returned. */
231#define VIDIOC_INT_S_CRYSTAL_FREQ _IOW ('d', 113, struct v4l2_crystal_freq)
232
Hans Verkuilb2f06482005-11-13 16:07:55 -0800233#endif /* V4L2_COMMON_H_ */