| Konstantin Sinyuk | 7f51439 | 2010-11-16 08:55:03 +0200 | [diff] [blame] | 1 | /* |
| 2 | * arch/arm/mach-dove/cm-a510.c |
| 3 | * |
| 4 | * Copyright (C) 2010 CompuLab, Ltd. |
| 5 | * Konstantin Sinyuk <kostyas@compulab.co.il> |
| 6 | * |
| 7 | * Based on Marvell DB-MV88AP510-BP Development Board Setup |
| 8 | * |
| 9 | * This file is licensed under the terms of the GNU General Public |
| 10 | * License version 2. This program is licensed "as is" without any |
| 11 | * warranty of any kind, whether express or implied. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/kernel.h> |
| 15 | #include <linux/init.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/ata_platform.h> |
| 18 | #include <linux/mv643xx_eth.h> |
| 19 | #include <linux/spi/spi.h> |
| 20 | #include <linux/spi/flash.h> |
| 21 | |
| 22 | #include <asm/mach-types.h> |
| 23 | #include <asm/mach/arch.h> |
| 24 | |
| 25 | #include <mach/dove.h> |
| 26 | |
| 27 | #include "common.h" |
| 28 | |
| 29 | static struct mv643xx_eth_platform_data cm_a510_ge00_data = { |
| 30 | .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, |
| 31 | }; |
| 32 | |
| 33 | static struct mv_sata_platform_data cm_a510_sata_data = { |
| 34 | .n_ports = 1, |
| 35 | }; |
| 36 | |
| 37 | /* |
| 38 | * SPI Devices: |
| 39 | * SPI0: 1M Flash Winbond w25q32bv |
| 40 | */ |
| 41 | static const struct flash_platform_data cm_a510_spi_flash_data = { |
| 42 | .type = "w25q32bv", |
| 43 | }; |
| 44 | |
| 45 | static struct spi_board_info __initdata cm_a510_spi_flash_info[] = { |
| 46 | { |
| 47 | .modalias = "m25p80", |
| 48 | .platform_data = &cm_a510_spi_flash_data, |
| 49 | .irq = -1, |
| 50 | .max_speed_hz = 20000000, |
| 51 | .bus_num = 0, |
| 52 | .chip_select = 0, |
| 53 | }, |
| 54 | }; |
| 55 | |
| 56 | static int __init cm_a510_pci_init(void) |
| 57 | { |
| 58 | if (machine_is_cm_a510()) |
| 59 | dove_pcie_init(1, 1); |
| 60 | |
| 61 | return 0; |
| 62 | } |
| 63 | |
| 64 | subsys_initcall(cm_a510_pci_init); |
| 65 | |
| 66 | /* Board Init */ |
| 67 | static void __init cm_a510_init(void) |
| 68 | { |
| 69 | /* |
| 70 | * Basic Dove setup. Needs to be called early. |
| 71 | */ |
| 72 | dove_init(); |
| 73 | |
| 74 | dove_ge00_init(&cm_a510_ge00_data); |
| 75 | dove_ehci0_init(); |
| 76 | dove_ehci1_init(); |
| 77 | dove_sata_init(&cm_a510_sata_data); |
| 78 | dove_sdio0_init(); |
| 79 | dove_sdio1_init(); |
| 80 | dove_spi0_init(); |
| 81 | dove_spi1_init(); |
| 82 | dove_uart0_init(); |
| 83 | dove_uart1_init(); |
| 84 | dove_i2c_init(); |
| 85 | spi_register_board_info(cm_a510_spi_flash_info, |
| 86 | ARRAY_SIZE(cm_a510_spi_flash_info)); |
| 87 | } |
| 88 | |
| 89 | MACHINE_START(CM_A510, "Compulab CM-A510 Board") |
| 90 | .boot_params = 0x00000100, |
| 91 | .init_machine = cm_a510_init, |
| 92 | .map_io = dove_map_io, |
| 93 | .init_irq = dove_init_irq, |
| 94 | .timer = &dove_timer, |
| 95 | MACHINE_END |