Jan Andersson | 9be0392 | 2011-05-03 20:11:58 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Driver for Aeroflex Gaisler GRLIB GRUSBHC EHCI host controller |
| 3 | * |
| 4 | * GRUSBHC is typically found on LEON/GRLIB SoCs |
| 5 | * |
| 6 | * (c) Jan Andersson <jan@gaisler.com> |
| 7 | * |
| 8 | * Based on ehci-ppc-of.c which is: |
| 9 | * (c) Valentine Barshak <vbarshak@ru.mvista.com> |
| 10 | * and in turn based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> |
| 11 | * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify it |
| 14 | * under the terms of the GNU General Public License as published by the |
| 15 | * Free Software Foundation; either version 2 of the License, or (at your |
| 16 | * option) any later version. |
| 17 | * |
| 18 | * This program is distributed in the hope that it will be useful, but |
| 19 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| 20 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| 21 | * for more details. |
| 22 | * |
| 23 | * You should have received a copy of the GNU General Public License |
| 24 | * along with this program; if not, write to the Free Software Foundation, |
| 25 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 26 | */ |
| 27 | |
| 28 | |
| 29 | #include <linux/signal.h> |
| 30 | |
| 31 | #include <linux/of_irq.h> |
| 32 | #include <linux/of_address.h> |
| 33 | #include <linux/of_platform.h> |
| 34 | |
| 35 | #define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */ |
| 36 | |
| 37 | /* called during probe() after chip reset completes */ |
| 38 | static int ehci_grlib_setup(struct usb_hcd *hcd) |
| 39 | { |
| 40 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| 41 | int retval; |
| 42 | |
| 43 | retval = ehci_halt(ehci); |
| 44 | if (retval) |
| 45 | return retval; |
| 46 | |
| 47 | retval = ehci_init(hcd); |
| 48 | if (retval) |
| 49 | return retval; |
| 50 | |
| 51 | ehci->sbrn = 0x20; |
| 52 | ehci_port_power(ehci, 1); |
| 53 | |
| 54 | return ehci_reset(ehci); |
| 55 | } |
| 56 | |
| 57 | |
| 58 | static const struct hc_driver ehci_grlib_hc_driver = { |
| 59 | .description = hcd_name, |
| 60 | .product_desc = "GRLIB GRUSBHC EHCI", |
| 61 | .hcd_priv_size = sizeof(struct ehci_hcd), |
| 62 | |
| 63 | /* |
| 64 | * generic hardware linkage |
| 65 | */ |
| 66 | .irq = ehci_irq, |
| 67 | .flags = HCD_MEMORY | HCD_USB2, |
| 68 | |
| 69 | /* |
| 70 | * basic lifecycle operations |
| 71 | */ |
| 72 | .reset = ehci_grlib_setup, |
| 73 | .start = ehci_run, |
| 74 | .stop = ehci_stop, |
| 75 | .shutdown = ehci_shutdown, |
| 76 | |
| 77 | /* |
| 78 | * managing i/o requests and associated device resources |
| 79 | */ |
| 80 | .urb_enqueue = ehci_urb_enqueue, |
| 81 | .urb_dequeue = ehci_urb_dequeue, |
| 82 | .endpoint_disable = ehci_endpoint_disable, |
| 83 | .endpoint_reset = ehci_endpoint_reset, |
| 84 | |
| 85 | /* |
| 86 | * scheduling support |
| 87 | */ |
| 88 | .get_frame_number = ehci_get_frame, |
| 89 | |
| 90 | /* |
| 91 | * root hub support |
| 92 | */ |
| 93 | .hub_status_data = ehci_hub_status_data, |
| 94 | .hub_control = ehci_hub_control, |
| 95 | #ifdef CONFIG_PM |
| 96 | .bus_suspend = ehci_bus_suspend, |
| 97 | .bus_resume = ehci_bus_resume, |
| 98 | #endif |
| 99 | .relinquish_port = ehci_relinquish_port, |
| 100 | .port_handed_over = ehci_port_handed_over, |
| 101 | |
| 102 | .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, |
| 103 | }; |
| 104 | |
| 105 | |
| 106 | static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) |
| 107 | { |
| 108 | struct device_node *dn = op->dev.of_node; |
| 109 | struct usb_hcd *hcd; |
| 110 | struct ehci_hcd *ehci = NULL; |
| 111 | struct resource res; |
| 112 | u32 hc_capbase; |
| 113 | int irq; |
| 114 | int rv; |
| 115 | |
| 116 | if (usb_disabled()) |
| 117 | return -ENODEV; |
| 118 | |
| 119 | dev_dbg(&op->dev, "initializing GRUSBHC EHCI USB Controller\n"); |
| 120 | |
| 121 | rv = of_address_to_resource(dn, 0, &res); |
| 122 | if (rv) |
| 123 | return rv; |
| 124 | |
| 125 | /* usb_create_hcd requires dma_mask != NULL */ |
| 126 | op->dev.dma_mask = &op->dev.coherent_dma_mask; |
| 127 | hcd = usb_create_hcd(&ehci_grlib_hc_driver, &op->dev, |
| 128 | "GRUSBHC EHCI USB"); |
| 129 | if (!hcd) |
| 130 | return -ENOMEM; |
| 131 | |
| 132 | hcd->rsrc_start = res.start; |
Joe Perches | 28f65c1 | 2011-06-09 09:13:32 -0700 | [diff] [blame] | 133 | hcd->rsrc_len = resource_size(&res); |
Jan Andersson | 9be0392 | 2011-05-03 20:11:58 +0200 | [diff] [blame] | 134 | |
| 135 | if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { |
| 136 | printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__); |
| 137 | rv = -EBUSY; |
| 138 | goto err_rmr; |
| 139 | } |
| 140 | |
| 141 | irq = irq_of_parse_and_map(dn, 0); |
| 142 | if (irq == NO_IRQ) { |
| 143 | printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); |
| 144 | rv = -EBUSY; |
| 145 | goto err_irq; |
| 146 | } |
| 147 | |
| 148 | hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); |
| 149 | if (!hcd->regs) { |
| 150 | printk(KERN_ERR "%s: ioremap failed\n", __FILE__); |
| 151 | rv = -ENOMEM; |
| 152 | goto err_ioremap; |
| 153 | } |
| 154 | |
| 155 | ehci = hcd_to_ehci(hcd); |
| 156 | |
| 157 | ehci->caps = hcd->regs; |
| 158 | |
| 159 | /* determine endianness of this implementation */ |
| 160 | hc_capbase = ehci_readl(ehci, &ehci->caps->hc_capbase); |
| 161 | if (HC_VERSION(ehci, hc_capbase) != GRUSBHC_HCIVERSION) { |
| 162 | ehci->big_endian_mmio = 1; |
| 163 | ehci->big_endian_desc = 1; |
| 164 | ehci->big_endian_capbase = 1; |
| 165 | } |
| 166 | |
| 167 | ehci->regs = hcd->regs + |
| 168 | HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); |
| 169 | |
| 170 | /* cache this readonly data; minimize chip reads */ |
| 171 | ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); |
| 172 | |
| 173 | rv = usb_add_hcd(hcd, irq, 0); |
| 174 | if (rv) |
| 175 | goto err_ehci; |
| 176 | |
| 177 | return 0; |
| 178 | |
| 179 | err_ehci: |
| 180 | iounmap(hcd->regs); |
| 181 | err_ioremap: |
| 182 | irq_dispose_mapping(irq); |
| 183 | err_irq: |
| 184 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| 185 | err_rmr: |
| 186 | usb_put_hcd(hcd); |
| 187 | |
| 188 | return rv; |
| 189 | } |
| 190 | |
| 191 | |
| 192 | static int ehci_hcd_grlib_remove(struct platform_device *op) |
| 193 | { |
| 194 | struct usb_hcd *hcd = dev_get_drvdata(&op->dev); |
| 195 | |
| 196 | dev_set_drvdata(&op->dev, NULL); |
| 197 | |
| 198 | dev_dbg(&op->dev, "stopping GRLIB GRUSBHC EHCI USB Controller\n"); |
| 199 | |
| 200 | usb_remove_hcd(hcd); |
| 201 | |
| 202 | iounmap(hcd->regs); |
| 203 | irq_dispose_mapping(hcd->irq); |
| 204 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| 205 | |
| 206 | usb_put_hcd(hcd); |
| 207 | |
| 208 | return 0; |
| 209 | } |
| 210 | |
| 211 | |
| 212 | static void ehci_hcd_grlib_shutdown(struct platform_device *op) |
| 213 | { |
| 214 | struct usb_hcd *hcd = dev_get_drvdata(&op->dev); |
| 215 | |
| 216 | if (hcd->driver->shutdown) |
| 217 | hcd->driver->shutdown(hcd); |
| 218 | } |
| 219 | |
| 220 | |
| 221 | static const struct of_device_id ehci_hcd_grlib_of_match[] = { |
| 222 | { |
| 223 | .name = "GAISLER_EHCI", |
| 224 | }, |
| 225 | { |
| 226 | .name = "01_026", |
| 227 | }, |
| 228 | {}, |
| 229 | }; |
| 230 | MODULE_DEVICE_TABLE(of, ehci_hcd_grlib_of_match); |
| 231 | |
| 232 | |
| 233 | static struct platform_driver ehci_grlib_driver = { |
| 234 | .probe = ehci_hcd_grlib_probe, |
| 235 | .remove = ehci_hcd_grlib_remove, |
| 236 | .shutdown = ehci_hcd_grlib_shutdown, |
| 237 | .driver = { |
| 238 | .name = "grlib-ehci", |
| 239 | .owner = THIS_MODULE, |
| 240 | .of_match_table = ehci_hcd_grlib_of_match, |
| 241 | }, |
| 242 | }; |