blob: a66994f0518f3222181f19c36f553a14faabcd81 [file] [log] [blame]
Shawn Guo55cf4182010-12-20 22:57:44 +08001/*
2 * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 */
14
15#include <linux/delay.h>
16#include <linux/platform_device.h>
17#include <linux/gpio.h>
18#include <linux/irq.h>
19
20#include <asm/mach-types.h>
21#include <asm/mach/arch.h>
22#include <asm/mach/time.h>
23
24#include <mach/common.h>
25#include <mach/iomux-mx23.h>
26
27#include "devices-mx23.h"
28
Shawn Guob73d77b2011-03-06 00:40:22 +080029#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18)
30#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28)
31
Shawn Guo55cf4182010-12-20 22:57:44 +080032static const iomux_cfg_t mx23evk_pads[] __initconst = {
33 /* duart */
Shawn Guodb63a492011-03-06 00:40:19 +080034 MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
35 MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
Shawn Guo2e8acbc2011-02-17 14:28:51 +080036
37 /* auart */
Shawn Guodb63a492011-03-06 00:40:19 +080038 MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
39 MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
40 MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
41 MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
Shawn Guob73d77b2011-03-06 00:40:22 +080042
43 /* mxsfb (lcdif) */
44 MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
45 MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
46 MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
47 MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
48 MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
49 MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
50 MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
51 MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
52 MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
53 MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
54 MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
55 MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
56 MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
57 MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
58 MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
59 MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
60 MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
61 MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
62 MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
63 MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
64 MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
65 MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
66 MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
67 MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
68 MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
69 MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
70 MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
71 MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
72 /* LCD panel enable */
73 MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
74 /* backlight control */
75 MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
76};
77
78/* mxsfb (lcdif) */
79static struct fb_videomode mx23evk_video_modes[] = {
80 {
81 .name = "Samsung-LMS430HF02",
82 .refresh = 60,
83 .xres = 480,
84 .yres = 272,
85 .pixclock = 108096, /* picosecond (9.2 MHz) */
86 .left_margin = 15,
87 .right_margin = 8,
88 .upper_margin = 12,
89 .lower_margin = 4,
90 .hsync_len = 1,
91 .vsync_len = 1,
92 .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
93 FB_SYNC_DOTCLK_FAILING_ACT,
94 },
95};
96
97static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
98 .mode_list = mx23evk_video_modes,
99 .mode_count = ARRAY_SIZE(mx23evk_video_modes),
100 .default_bpp = 32,
101 .ld_intf_width = STMLCDIF_24BIT,
Shawn Guo55cf4182010-12-20 22:57:44 +0800102};
103
104static void __init mx23evk_init(void)
105{
Shawn Guob73d77b2011-03-06 00:40:22 +0800106 int ret;
107
Shawn Guo55cf4182010-12-20 22:57:44 +0800108 mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
109
110 mx23_add_duart();
Shawn Guo2e8acbc2011-02-17 14:28:51 +0800111 mx23_add_auart0();
Shawn Guob73d77b2011-03-06 00:40:22 +0800112
113 ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
114 if (ret)
115 pr_warn("failed to request gpio lcd-enable: %d\n", ret);
116 else
117 gpio_set_value(MX23EVK_LCD_ENABLE, 1);
118
119 ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
120 if (ret)
121 pr_warn("failed to request gpio bl-enable: %d\n", ret);
122 else
123 gpio_set_value(MX23EVK_BL_ENABLE, 1);
124
125 mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
Shawn Guo55cf4182010-12-20 22:57:44 +0800126}
127
128static void __init mx23evk_timer_init(void)
129{
130 mx23_clocks_init();
131}
132
133static struct sys_timer mx23evk_timer = {
134 .init = mx23evk_timer_init,
135};
136
137MACHINE_START(MX23EVK, "Freescale MX23 EVK")
138 /* Maintainer: Freescale Semiconductor, Inc. */
139 .map_io = mx23_map_io,
140 .init_irq = mx23_init_irq,
141 .init_machine = mx23evk_init,
142 .timer = &mx23evk_timer,
143MACHINE_END