blob: 92f7ea070b629b15ee7c20a5a5d5a4f2693995ec [file] [log] [blame]
Chris Metcalf867e3592010-05-28 23:09:12 -04001# For a description of the syntax of this configuration file,
Chris Metcalf5fb682b2011-02-28 15:58:39 -05002# see Documentation/kbuild/kconfig-language.txt.
Chris Metcalf867e3592010-05-28 23:09:12 -04003
Thomas Gleixner8df274062011-01-19 20:44:43 +01004config TILE
5 def_bool y
6 select HAVE_KVM if !TILEGX
7 select GENERIC_FIND_FIRST_BIT
8 select GENERIC_FIND_NEXT_BIT
9 select USE_GENERIC_SMP_HELPERS
10 select CC_OPTIMIZE_FOR_SIZE
11 select HAVE_GENERIC_HARDIRQS
12 select GENERIC_IRQ_PROBE
13 select GENERIC_PENDING_IRQ if SMP
Thomas Gleixnerdeb4b002011-02-06 23:04:44 +000014 select GENERIC_HARDIRQS_NO_DEPRECATED
Thomas Gleixner8df274062011-01-19 20:44:43 +010015
16# FIXME: investigate whether we need/want these options.
17# select HAVE_IOREMAP_PROT
Chris Metcalf5fb682b2011-02-28 15:58:39 -050018# select HAVE_OPTPROBES
19# select HAVE_REGS_AND_STACK_ACCESS_API
20# select HAVE_HW_BREAKPOINT
21# select PERF_EVENTS
22# select HAVE_USER_RETURN_NOTIFIER
23# config NO_BOOTMEM
24# config ARCH_SUPPORTS_DEBUG_PAGEALLOC
25# config HUGETLB_PAGE_SIZE_VARIABLE
Thomas Gleixner8df274062011-01-19 20:44:43 +010026
Chris Metcalf867e3592010-05-28 23:09:12 -040027config MMU
28 def_bool y
29
30config GENERIC_CSUM
31 def_bool y
32
Chris Metcalf867e3592010-05-28 23:09:12 -040033config SEMAPHORE_SLEEPERS
34 def_bool y
35
36config HAVE_ARCH_ALLOC_REMAP
37 def_bool y
38
39config HAVE_SETUP_PER_CPU_AREA
40 def_bool y
41
42config NEED_PER_CPU_PAGE_FIRST_CHUNK
Chris Metcalf5fb682b2011-02-28 15:58:39 -050043 def_bool y
Chris Metcalf867e3592010-05-28 23:09:12 -040044
45config SYS_SUPPORTS_HUGETLBFS
46 def_bool y
47
48config GENERIC_TIME
49 def_bool y
50
51config GENERIC_CLOCKEVENTS
52 def_bool y
53
54# FIXME: tilegx can implement a more efficent rwsem.
55config RWSEM_GENERIC_SPINLOCK
56 def_bool y
57
58# We have a very flat architecture from a migration point of view,
59# so save boot time by presetting this (particularly useful on tile-sim).
60config DEFAULT_MIGRATION_COST
61 int
62 default "10000000"
63
64# We only support gcc 4.4 and above, so this should work.
65config ARCH_SUPPORTS_OPTIMIZED_INLINING
66 def_bool y
67
68config ARCH_PHYS_ADDR_T_64BIT
69 def_bool y
70
FUJITA Tomonorid31eb512010-10-27 15:32:58 -070071config ARCH_DMA_ADDR_T_64BIT
72 def_bool y
73
Chris Metcalf867e3592010-05-28 23:09:12 -040074config LOCKDEP_SUPPORT
75 def_bool y
76
77config STACKTRACE_SUPPORT
78 def_bool y
79 select STACKTRACE
80
81# We use discontigmem for now; at some point we may want to switch
82# to sparsemem (Tilera bug 7996).
83config ARCH_DISCONTIGMEM_ENABLE
84 def_bool y
85
86config ARCH_DISCONTIGMEM_DEFAULT
87 def_bool y
88
89config TRACE_IRQFLAGS_SUPPORT
90 def_bool y
91
92config STRICT_DEVMEM
93 def_bool y
94
95# SMP is required for Tilera Linux.
96config SMP
97 def_bool y
98
99# Allow checking for compile-time determined overflow errors in
100# copy_from_user(). There are still unprovable places in the
101# generic code as of 2.6.34, so this option is not really compatible
102# with -Werror, which is more useful in general.
103config DEBUG_COPY_FROM_USER
104 def_bool n
105
106config HVC_TILE
107 select HVC_DRIVER
108 def_bool y
109
Chris Metcalf867e3592010-05-28 23:09:12 -0400110# Please note: TILE-Gx support is not yet finalized; this is
111# the preliminary support. TILE-Gx drivers are only provided
112# with the alpha or beta test versions for Tilera customers.
113config TILEGX
114 depends on EXPERIMENTAL
115 bool "Building with TILE-Gx (64-bit) compiler and toolchain"
116
117config 64BIT
118 depends on TILEGX
119 def_bool y
120
121config ARCH_DEFCONFIG
122 string
123 default "arch/tile/configs/tile_defconfig" if !TILEGX
124 default "arch/tile/configs/tilegx_defconfig" if TILEGX
125
126source "init/Kconfig"
127
128menu "Tilera-specific configuration"
129
130config NR_CPUS
131 int "Maximum number of tiles (2-255)"
132 range 2 255
133 depends on SMP
134 default "64"
135 ---help---
136 Building with 64 is the recommended value, but a slightly
137 smaller kernel memory footprint results from using a smaller
138 value on chips with fewer tiles.
139
140source "kernel/time/Kconfig"
141
142source "kernel/Kconfig.hz"
143
144config KEXEC
145 bool "kexec system call"
146 ---help---
147 kexec is a system call that implements the ability to shutdown your
148 current kernel, and to start another kernel. It is like a reboot
149 but it is independent of the system firmware. It is used
150 to implement the "mboot" Tilera booter.
151
152 The name comes from the similarity to the exec system call.
153
154config COMPAT
155 bool "Support 32-bit TILE-Gx binaries in addition to 64-bit"
156 depends on TILEGX
157 select COMPAT_BINFMT_ELF
158 default y
159 ---help---
160 If enabled, the kernel will support running TILE-Gx binaries
161 that were built with the -m32 option.
162
163config SYSVIPC_COMPAT
164 def_bool y
165 depends on COMPAT && SYSVIPC
166
167# We do not currently support disabling HIGHMEM on tile64 and tilepro.
168config HIGHMEM
169 bool # "Support for more than 512 MB of RAM"
170 default !TILEGX
171 ---help---
172 Linux can use the full amount of RAM in the system by
173 default. However, the address space of TILE processors is
174 only 4 Gigabytes large. That means that, if you have a large
175 amount of physical memory, not all of it can be "permanently
176 mapped" by the kernel. The physical memory that's not
177 permanently mapped is called "high memory".
178
179 If you are compiling a kernel which will never run on a
180 machine with more than 512 MB total physical RAM, answer
181 "false" here. This will result in the kernel mapping all of
182 physical memory into the top 1 GB of virtual memory space.
183
184 If unsure, say "true".
185
186# We do not currently support disabling NUMA.
187config NUMA
188 bool # "NUMA Memory Allocation and Scheduler Support"
189 depends on SMP && DISCONTIGMEM
190 default y
191 ---help---
192 NUMA memory allocation is required for TILE processors
193 unless booting with memory striping enabled in the
194 hypervisor, or with only a single memory controller.
195 It is recommended that this option always be enabled.
196
197config NODES_SHIFT
198 int "Log base 2 of the max number of memory controllers"
199 default 2
200 depends on NEED_MULTIPLE_NODES
201 ---help---
202 By default, 2, i.e. 2^2 == 4 DDR2 controllers.
203 In a system with more controllers, this value should be raised.
204
205# Need 16MB areas to enable hugetlb
206# See build-time check in arch/tile/mm/init.c.
207config FORCE_MAX_ZONEORDER
208 int
209 default 9
210
211choice
212 depends on !TILEGX
David Rientjes6a108a12011-01-20 14:44:16 -0800213 prompt "Memory split" if EXPERT
Chris Metcalf867e3592010-05-28 23:09:12 -0400214 default VMSPLIT_3G
215 ---help---
216 Select the desired split between kernel and user memory.
217
218 If the address range available to the kernel is less than the
219 physical memory installed, the remaining memory will be available
220 as "high memory". Accessing high memory is a little more costly
221 than low memory, as it needs to be mapped into the kernel first.
222 Note that increasing the kernel address space limits the range
223 available to user programs, making the address space there
224 tighter. Selecting anything other than the default 3G/1G split
225 will also likely make your kernel incompatible with binary-only
226 kernel modules.
227
228 If you are not absolutely sure what you are doing, leave this
229 option alone!
230
Chris Metcalf55928402010-09-13 08:50:09 -0400231 config VMSPLIT_3_75G
Chris Metcalf867e3592010-05-28 23:09:12 -0400232 bool "3.75G/0.25G user/kernel split (no kernel networking)"
Chris Metcalf55928402010-09-13 08:50:09 -0400233 config VMSPLIT_3_5G
Chris Metcalf867e3592010-05-28 23:09:12 -0400234 bool "3.5G/0.5G user/kernel split"
235 config VMSPLIT_3G
236 bool "3G/1G user/kernel split"
237 config VMSPLIT_3G_OPT
238 bool "3G/1G user/kernel split (for full 1G low memory)"
239 config VMSPLIT_2G
240 bool "2G/2G user/kernel split"
241 config VMSPLIT_1G
242 bool "1G/3G user/kernel split"
243endchoice
244
245config PAGE_OFFSET
246 hex
Chris Metcalf55928402010-09-13 08:50:09 -0400247 default 0xF0000000 if VMSPLIT_3_75G
248 default 0xE0000000 if VMSPLIT_3_5G
Chris Metcalf867e3592010-05-28 23:09:12 -0400249 default 0xB0000000 if VMSPLIT_3G_OPT
250 default 0x80000000 if VMSPLIT_2G
251 default 0x40000000 if VMSPLIT_1G
252 default 0xC0000000
253
254source "mm/Kconfig"
255
256config CMDLINE_BOOL
257 bool "Built-in kernel command line"
258 default n
259 ---help---
260 Allow for specifying boot arguments to the kernel at
261 build time. On some systems (e.g. embedded ones), it is
262 necessary or convenient to provide some or all of the
263 kernel boot arguments with the kernel itself (that is,
264 to not rely on the boot loader to provide them.)
265
266 To compile command line arguments into the kernel,
267 set this option to 'Y', then fill in the
268 the boot arguments in CONFIG_CMDLINE.
269
270 Systems with fully functional boot loaders (e.g. mboot, or
271 if booting over PCI) should leave this option set to 'N'.
272
273config CMDLINE
274 string "Built-in kernel command string"
275 depends on CMDLINE_BOOL
276 default ""
277 ---help---
278 Enter arguments here that should be compiled into the kernel
279 image and used at boot time. If the boot loader provides a
280 command line at boot time, it is appended to this string to
281 form the full kernel command line, when the system boots.
282
283 However, you can use the CONFIG_CMDLINE_OVERRIDE option to
284 change this behavior.
285
286 In most cases, the command line (whether built-in or provided
287 by the boot loader) should specify the device for the root
288 file system.
289
290config CMDLINE_OVERRIDE
291 bool "Built-in command line overrides boot loader arguments"
292 default n
293 depends on CMDLINE_BOOL
294 ---help---
295 Set this option to 'Y' to have the kernel ignore the boot loader
296 command line, and use ONLY the built-in command line.
297
298 This is used to work around broken boot loaders. This should
299 be set to 'N' under normal conditions.
300
301config VMALLOC_RESERVE
302 hex
303 default 0x1000000
304
Chris Metcalf9f9c0382010-06-25 17:00:56 -0400305config HARDWALL
306 bool "Hardwall support to allow access to user dynamic network"
307 default y
308
Chris Metcalfa78c9422010-10-14 16:23:03 -0400309config KERNEL_PL
310 int "Processor protection level for kernel"
311 range 1 2
312 default "1"
313 ---help---
314 This setting determines the processor protection level the
315 kernel will be built to run at. Generally you should use
316 the default value here.
317
Chris Metcalf867e3592010-05-28 23:09:12 -0400318endmenu # Tilera-specific configuration
319
320menu "Bus options"
321
Chris Metcalff02cbbe2010-11-02 12:05:10 -0400322config PCI
323 bool "PCI support"
324 default y
325 select PCI_DOMAINS
326 ---help---
327 Enable PCI root complex support, so PCIe endpoint devices can
328 be attached to the Tile chip. Many, but not all, PCI devices
329 are supported under Tilera's root complex driver.
330
331config PCI_DOMAINS
332 bool
333
Chris Metcalf867e3592010-05-28 23:09:12 -0400334config NO_IOMEM
335 def_bool !PCI
336
337config NO_IOPORT
338 def_bool !PCI
339
340source "drivers/pci/Kconfig"
341
342source "drivers/pci/hotplug/Kconfig"
343
344endmenu
345
346menu "Executable file formats"
347
348# only elf supported
349config KCORE_ELF
350 def_bool y
351 depends on PROC_FS
352
353source "fs/Kconfig.binfmt"
354
355endmenu
356
357source "net/Kconfig"
358
359source "drivers/Kconfig"
360
361source "fs/Kconfig"
362
363source "arch/tile/Kconfig.debug"
364
365source "security/Kconfig"
366
367source "crypto/Kconfig"
368
369source "lib/Kconfig"
Chris Metcalfa78c9422010-10-14 16:23:03 -0400370
371source "arch/tile/kvm/Kconfig"