Per Dalén | 83bffbc | 2011-04-06 20:29:44 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Driver for +/-1 degree C, SMBus-Compatible Remote/Local Temperature Sensor |
| 3 | * with Overtemperature Alarm |
| 4 | * |
| 5 | * Copyright (C) 2011 AppearTV AS |
| 6 | * |
| 7 | * Derived from: |
| 8 | * |
| 9 | * Based on the max1619 driver. |
| 10 | * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru> |
| 11 | * Jean Delvare <khali@linux-fr.org> |
| 12 | * |
| 13 | * The MAX6642 is a sensor chip made by Maxim. |
| 14 | * It reports up to two temperatures (its own plus up to |
| 15 | * one external one). Complete datasheet can be |
| 16 | * obtained from Maxim's website at: |
| 17 | * http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf |
| 18 | * |
| 19 | * This program is free software; you can redistribute it and/or modify |
| 20 | * it under the terms of the GNU General Public License as published by |
| 21 | * the Free Software Foundation; either version 2 of the License, or |
| 22 | * (at your option) any later version. |
| 23 | * |
| 24 | * This program is distributed in the hope that it will be useful, |
| 25 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 26 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 27 | * GNU General Public License for more details. |
| 28 | * |
| 29 | * You should have received a copy of the GNU General Public License |
| 30 | * along with this program; if not, write to the Free Software |
| 31 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 32 | */ |
| 33 | |
| 34 | |
| 35 | #include <linux/module.h> |
| 36 | #include <linux/init.h> |
| 37 | #include <linux/slab.h> |
| 38 | #include <linux/jiffies.h> |
| 39 | #include <linux/i2c.h> |
| 40 | #include <linux/hwmon.h> |
| 41 | #include <linux/hwmon-sysfs.h> |
| 42 | #include <linux/err.h> |
| 43 | #include <linux/mutex.h> |
| 44 | #include <linux/sysfs.h> |
| 45 | |
| 46 | static const unsigned short normal_i2c[] = { |
| 47 | 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; |
| 48 | |
| 49 | /* |
| 50 | * The MAX6642 registers |
| 51 | */ |
| 52 | |
| 53 | #define MAX6642_REG_R_MAN_ID 0xFE |
| 54 | #define MAX6642_REG_R_CONFIG 0x03 |
| 55 | #define MAX6642_REG_W_CONFIG 0x09 |
| 56 | #define MAX6642_REG_R_STATUS 0x02 |
| 57 | #define MAX6642_REG_R_LOCAL_TEMP 0x00 |
| 58 | #define MAX6642_REG_R_LOCAL_TEMPL 0x11 |
| 59 | #define MAX6642_REG_R_LOCAL_HIGH 0x05 |
| 60 | #define MAX6642_REG_W_LOCAL_HIGH 0x0B |
| 61 | #define MAX6642_REG_R_REMOTE_TEMP 0x01 |
| 62 | #define MAX6642_REG_R_REMOTE_TEMPL 0x10 |
| 63 | #define MAX6642_REG_R_REMOTE_HIGH 0x07 |
| 64 | #define MAX6642_REG_W_REMOTE_HIGH 0x0D |
| 65 | |
| 66 | /* |
| 67 | * Conversions |
| 68 | */ |
| 69 | |
| 70 | static int temp_from_reg10(int val) |
| 71 | { |
| 72 | return val * 250; |
| 73 | } |
| 74 | |
| 75 | static int temp_from_reg(int val) |
| 76 | { |
| 77 | return val * 1000; |
| 78 | } |
| 79 | |
| 80 | static int temp_to_reg(int val) |
| 81 | { |
| 82 | return val / 1000; |
| 83 | } |
| 84 | |
| 85 | /* |
| 86 | * Client data (each client gets its own) |
| 87 | */ |
| 88 | |
| 89 | struct max6642_data { |
| 90 | struct device *hwmon_dev; |
| 91 | struct mutex update_lock; |
| 92 | bool valid; /* zero until following fields are valid */ |
| 93 | unsigned long last_updated; /* in jiffies */ |
| 94 | |
| 95 | /* registers values */ |
| 96 | u16 temp_input[2]; /* local/remote */ |
| 97 | u16 temp_high[2]; /* local/remote */ |
| 98 | u8 alarms; |
| 99 | }; |
| 100 | |
| 101 | /* |
| 102 | * Real code |
| 103 | */ |
| 104 | |
| 105 | static void max6642_init_client(struct i2c_client *client) |
| 106 | { |
| 107 | u8 config; |
| 108 | struct max6642_data *data = i2c_get_clientdata(client); |
| 109 | |
| 110 | /* |
| 111 | * Start the conversions. |
| 112 | */ |
| 113 | config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); |
| 114 | if (config & 0x40) |
| 115 | i2c_smbus_write_byte_data(client, MAX6642_REG_W_CONFIG, |
| 116 | config & 0xBF); /* run */ |
| 117 | |
| 118 | data->temp_high[0] = i2c_smbus_read_byte_data(client, |
| 119 | MAX6642_REG_R_LOCAL_HIGH); |
| 120 | data->temp_high[1] = i2c_smbus_read_byte_data(client, |
| 121 | MAX6642_REG_R_REMOTE_HIGH); |
| 122 | } |
| 123 | |
| 124 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
| 125 | static int max6642_detect(struct i2c_client *client, |
| 126 | struct i2c_board_info *info) |
| 127 | { |
| 128 | struct i2c_adapter *adapter = client->adapter; |
| 129 | u8 reg_config, reg_status, man_id; |
| 130 | |
| 131 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 132 | return -ENODEV; |
| 133 | |
| 134 | /* identification */ |
| 135 | man_id = i2c_smbus_read_byte_data(client, MAX6642_REG_R_MAN_ID); |
| 136 | if (man_id != 0x4D) |
| 137 | return -ENODEV; |
| 138 | |
| 139 | /* |
| 140 | * We read the config and status register, the 4 lower bits in the |
| 141 | * config register should be zero and bit 5, 3, 1 and 0 should be |
| 142 | * zero in the status register. |
| 143 | */ |
| 144 | reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); |
| 145 | reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS); |
| 146 | if (((reg_config & 0x0f) != 0x00) || |
| 147 | ((reg_status & 0x2b) != 0x00)) |
| 148 | return -ENODEV; |
| 149 | |
| 150 | strlcpy(info->type, "max6642", I2C_NAME_SIZE); |
| 151 | |
| 152 | return 0; |
| 153 | } |
| 154 | |
| 155 | static struct max6642_data *max6642_update_device(struct device *dev) |
| 156 | { |
| 157 | struct i2c_client *client = to_i2c_client(dev); |
| 158 | struct max6642_data *data = i2c_get_clientdata(client); |
| 159 | u16 val, tmp; |
| 160 | |
| 161 | mutex_lock(&data->update_lock); |
| 162 | |
| 163 | if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { |
| 164 | dev_dbg(&client->dev, "Updating max6642 data.\n"); |
| 165 | val = i2c_smbus_read_byte_data(client, |
| 166 | MAX6642_REG_R_LOCAL_TEMPL); |
| 167 | tmp = (val >> 6) & 3; |
| 168 | val = i2c_smbus_read_byte_data(client, |
| 169 | MAX6642_REG_R_LOCAL_TEMP); |
| 170 | val = (val << 2) | tmp; |
| 171 | data->temp_input[0] = val; |
| 172 | val = i2c_smbus_read_byte_data(client, |
| 173 | MAX6642_REG_R_REMOTE_TEMPL); |
| 174 | tmp = (val >> 6) & 3; |
| 175 | val = i2c_smbus_read_byte_data(client, |
| 176 | MAX6642_REG_R_REMOTE_TEMP); |
| 177 | val = (val << 2) | tmp; |
| 178 | data->temp_input[1] = val; |
| 179 | data->alarms = i2c_smbus_read_byte_data(client, |
| 180 | MAX6642_REG_R_STATUS); |
| 181 | |
| 182 | data->last_updated = jiffies; |
| 183 | data->valid = 1; |
| 184 | } |
| 185 | |
| 186 | mutex_unlock(&data->update_lock); |
| 187 | |
| 188 | return data; |
| 189 | } |
| 190 | |
| 191 | /* |
| 192 | * Sysfs stuff |
| 193 | */ |
| 194 | |
| 195 | static ssize_t show_temp_max10(struct device *dev, |
| 196 | struct device_attribute *dev_attr, char *buf) |
| 197 | { |
| 198 | struct max6642_data *data = max6642_update_device(dev); |
| 199 | struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); |
| 200 | |
| 201 | return sprintf(buf, "%d\n", |
| 202 | temp_from_reg10(data->temp_input[attr->index])); |
| 203 | } |
| 204 | |
| 205 | static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, |
| 206 | char *buf) |
| 207 | { |
| 208 | struct max6642_data *data = max6642_update_device(dev); |
| 209 | struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); |
| 210 | |
| 211 | return sprintf(buf, "%d\n", temp_from_reg(data->temp_high[attr2->nr])); |
| 212 | } |
| 213 | |
| 214 | static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, |
| 215 | const char *buf, size_t count) |
| 216 | { |
| 217 | unsigned long val; |
| 218 | int err; |
| 219 | struct i2c_client *client = to_i2c_client(dev); |
| 220 | struct max6642_data *data = i2c_get_clientdata(client); |
| 221 | struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); |
| 222 | |
| 223 | err = strict_strtoul(buf, 10, &val); |
| 224 | if (err < 0) |
| 225 | return err; |
| 226 | |
| 227 | mutex_lock(&data->update_lock); |
| 228 | data->temp_high[attr2->nr] = SENSORS_LIMIT(temp_to_reg(val), 0, 255); |
| 229 | i2c_smbus_write_byte_data(client, attr2->index, |
| 230 | data->temp_high[attr2->nr]); |
| 231 | mutex_unlock(&data->update_lock); |
| 232 | return count; |
| 233 | } |
| 234 | |
| 235 | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, |
| 236 | char *buf) |
| 237 | { |
| 238 | int bitnr = to_sensor_dev_attr(attr)->index; |
| 239 | struct max6642_data *data = max6642_update_device(dev); |
| 240 | return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); |
| 241 | } |
| 242 | |
| 243 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_max10, NULL, 0); |
| 244 | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_max10, NULL, 1); |
| 245 | static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, |
| 246 | set_temp_max, 0, MAX6642_REG_W_LOCAL_HIGH); |
| 247 | static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, |
| 248 | set_temp_max, 1, MAX6642_REG_W_REMOTE_HIGH); |
Per Dalen | 614198b | 2011-05-31 06:54:21 -0700 | [diff] [blame^] | 249 | static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); |
Per Dalén | 83bffbc | 2011-04-06 20:29:44 +0200 | [diff] [blame] | 250 | static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); |
| 251 | static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); |
| 252 | |
| 253 | static struct attribute *max6642_attributes[] = { |
| 254 | &sensor_dev_attr_temp1_input.dev_attr.attr, |
| 255 | &sensor_dev_attr_temp2_input.dev_attr.attr, |
| 256 | &sensor_dev_attr_temp1_max.dev_attr.attr, |
| 257 | &sensor_dev_attr_temp2_max.dev_attr.attr, |
| 258 | |
Per Dalen | 614198b | 2011-05-31 06:54:21 -0700 | [diff] [blame^] | 259 | &sensor_dev_attr_temp2_fault.dev_attr.attr, |
Per Dalén | 83bffbc | 2011-04-06 20:29:44 +0200 | [diff] [blame] | 260 | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| 261 | &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, |
| 262 | NULL |
| 263 | }; |
| 264 | |
| 265 | static const struct attribute_group max6642_group = { |
| 266 | .attrs = max6642_attributes, |
| 267 | }; |
| 268 | |
| 269 | static int max6642_probe(struct i2c_client *new_client, |
| 270 | const struct i2c_device_id *id) |
| 271 | { |
| 272 | struct max6642_data *data; |
| 273 | int err; |
| 274 | |
| 275 | data = kzalloc(sizeof(struct max6642_data), GFP_KERNEL); |
| 276 | if (!data) { |
| 277 | err = -ENOMEM; |
| 278 | goto exit; |
| 279 | } |
| 280 | |
| 281 | i2c_set_clientdata(new_client, data); |
| 282 | mutex_init(&data->update_lock); |
| 283 | |
| 284 | /* Initialize the MAX6642 chip */ |
| 285 | max6642_init_client(new_client); |
| 286 | |
| 287 | /* Register sysfs hooks */ |
| 288 | err = sysfs_create_group(&new_client->dev.kobj, &max6642_group); |
| 289 | if (err) |
| 290 | goto exit_free; |
| 291 | |
| 292 | data->hwmon_dev = hwmon_device_register(&new_client->dev); |
| 293 | if (IS_ERR(data->hwmon_dev)) { |
| 294 | err = PTR_ERR(data->hwmon_dev); |
| 295 | goto exit_remove_files; |
| 296 | } |
| 297 | |
| 298 | return 0; |
| 299 | |
| 300 | exit_remove_files: |
| 301 | sysfs_remove_group(&new_client->dev.kobj, &max6642_group); |
| 302 | exit_free: |
| 303 | kfree(data); |
| 304 | exit: |
| 305 | return err; |
| 306 | } |
| 307 | |
| 308 | static int max6642_remove(struct i2c_client *client) |
| 309 | { |
| 310 | struct max6642_data *data = i2c_get_clientdata(client); |
| 311 | |
| 312 | hwmon_device_unregister(data->hwmon_dev); |
| 313 | sysfs_remove_group(&client->dev.kobj, &max6642_group); |
| 314 | |
| 315 | kfree(data); |
| 316 | return 0; |
| 317 | } |
| 318 | |
| 319 | /* |
| 320 | * Driver data (common to all clients) |
| 321 | */ |
| 322 | |
| 323 | static const struct i2c_device_id max6642_id[] = { |
| 324 | { "max6642", 0 }, |
| 325 | { } |
| 326 | }; |
| 327 | MODULE_DEVICE_TABLE(i2c, max6642_id); |
| 328 | |
| 329 | static struct i2c_driver max6642_driver = { |
| 330 | .class = I2C_CLASS_HWMON, |
| 331 | .driver = { |
| 332 | .name = "max6642", |
| 333 | }, |
| 334 | .probe = max6642_probe, |
| 335 | .remove = max6642_remove, |
| 336 | .id_table = max6642_id, |
| 337 | .detect = max6642_detect, |
| 338 | .address_list = normal_i2c, |
| 339 | }; |
| 340 | |
| 341 | static int __init max6642_init(void) |
| 342 | { |
| 343 | return i2c_add_driver(&max6642_driver); |
| 344 | } |
| 345 | |
| 346 | static void __exit max6642_exit(void) |
| 347 | { |
| 348 | i2c_del_driver(&max6642_driver); |
| 349 | } |
| 350 | |
| 351 | MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>"); |
| 352 | MODULE_DESCRIPTION("MAX6642 sensor driver"); |
| 353 | MODULE_LICENSE("GPL"); |
| 354 | |
| 355 | module_init(max6642_init); |
| 356 | module_exit(max6642_exit); |