Guennadi Liakhovetski | 077e2c1 | 2010-07-26 11:12:43 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Driver for the SH-Mobile MIPI CSI-2 unit |
| 3 | * |
| 4 | * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/delay.h> |
| 12 | #include <linux/i2c.h> |
| 13 | #include <linux/io.h> |
| 14 | #include <linux/platform_device.h> |
| 15 | #include <linux/pm_runtime.h> |
| 16 | #include <linux/slab.h> |
| 17 | #include <linux/videodev2.h> |
| 18 | |
| 19 | #include <media/sh_mobile_csi2.h> |
| 20 | #include <media/soc_camera.h> |
| 21 | #include <media/v4l2-common.h> |
| 22 | #include <media/v4l2-dev.h> |
| 23 | #include <media/v4l2-device.h> |
| 24 | #include <media/v4l2-mediabus.h> |
| 25 | #include <media/v4l2-subdev.h> |
| 26 | |
| 27 | #define SH_CSI2_TREF 0x00 |
| 28 | #define SH_CSI2_SRST 0x04 |
| 29 | #define SH_CSI2_PHYCNT 0x08 |
| 30 | #define SH_CSI2_CHKSUM 0x0C |
| 31 | #define SH_CSI2_VCDT 0x10 |
| 32 | |
| 33 | struct sh_csi2 { |
| 34 | struct v4l2_subdev subdev; |
| 35 | struct list_head list; |
| 36 | struct notifier_block notifier; |
| 37 | unsigned int irq; |
| 38 | void __iomem *base; |
| 39 | struct platform_device *pdev; |
| 40 | struct sh_csi2_client_config *client; |
| 41 | }; |
| 42 | |
| 43 | static int sh_csi2_try_fmt(struct v4l2_subdev *sd, |
| 44 | struct v4l2_mbus_framefmt *mf) |
| 45 | { |
| 46 | struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev); |
| 47 | struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; |
| 48 | |
| 49 | if (mf->width > 8188) |
| 50 | mf->width = 8188; |
| 51 | else if (mf->width & 1) |
| 52 | mf->width &= ~1; |
| 53 | |
| 54 | switch (pdata->type) { |
| 55 | case SH_CSI2C: |
| 56 | switch (mf->code) { |
| 57 | case V4L2_MBUS_FMT_UYVY8_2X8: /* YUV422 */ |
| 58 | case V4L2_MBUS_FMT_YUYV8_1_5X8: /* YUV420 */ |
| 59 | case V4L2_MBUS_FMT_GREY8_1X8: /* RAW8 */ |
| 60 | case V4L2_MBUS_FMT_SBGGR8_1X8: |
| 61 | case V4L2_MBUS_FMT_SGRBG8_1X8: |
| 62 | break; |
| 63 | default: |
| 64 | /* All MIPI CSI-2 devices must support one of primary formats */ |
| 65 | mf->code = V4L2_MBUS_FMT_YUYV8_2X8; |
| 66 | } |
| 67 | break; |
| 68 | case SH_CSI2I: |
| 69 | switch (mf->code) { |
| 70 | case V4L2_MBUS_FMT_GREY8_1X8: /* RAW8 */ |
| 71 | case V4L2_MBUS_FMT_SBGGR8_1X8: |
| 72 | case V4L2_MBUS_FMT_SGRBG8_1X8: |
| 73 | case V4L2_MBUS_FMT_SBGGR10_1X10: /* RAW10 */ |
| 74 | case V4L2_MBUS_FMT_SBGGR12_1X12: /* RAW12 */ |
| 75 | break; |
| 76 | default: |
| 77 | /* All MIPI CSI-2 devices must support one of primary formats */ |
| 78 | mf->code = V4L2_MBUS_FMT_SBGGR8_1X8; |
| 79 | } |
| 80 | break; |
| 81 | } |
| 82 | |
| 83 | return 0; |
| 84 | } |
| 85 | |
| 86 | /* |
| 87 | * We have done our best in try_fmt to try and tell the sensor, which formats |
| 88 | * we support. If now the configuration is unsuitable for us we can only |
| 89 | * error out. |
| 90 | */ |
| 91 | static int sh_csi2_s_fmt(struct v4l2_subdev *sd, |
| 92 | struct v4l2_mbus_framefmt *mf) |
| 93 | { |
| 94 | struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev); |
| 95 | u32 tmp = (priv->client->channel & 3) << 8; |
| 96 | |
| 97 | dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code); |
| 98 | if (mf->width > 8188 || mf->width & 1) |
| 99 | return -EINVAL; |
| 100 | |
| 101 | switch (mf->code) { |
| 102 | case V4L2_MBUS_FMT_UYVY8_2X8: |
| 103 | tmp |= 0x1e; /* YUV422 8 bit */ |
| 104 | break; |
| 105 | case V4L2_MBUS_FMT_YUYV8_1_5X8: |
| 106 | tmp |= 0x18; /* YUV420 8 bit */ |
| 107 | break; |
| 108 | case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE: |
| 109 | tmp |= 0x21; /* RGB555 */ |
| 110 | break; |
| 111 | case V4L2_MBUS_FMT_RGB565_2X8_BE: |
| 112 | tmp |= 0x22; /* RGB565 */ |
| 113 | break; |
| 114 | case V4L2_MBUS_FMT_GREY8_1X8: |
| 115 | case V4L2_MBUS_FMT_SBGGR8_1X8: |
| 116 | case V4L2_MBUS_FMT_SGRBG8_1X8: |
| 117 | tmp |= 0x2a; /* RAW8 */ |
| 118 | break; |
| 119 | default: |
| 120 | return -EINVAL; |
| 121 | } |
| 122 | |
| 123 | iowrite32(tmp, priv->base + SH_CSI2_VCDT); |
| 124 | |
| 125 | return 0; |
| 126 | } |
| 127 | |
| 128 | static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = { |
| 129 | .s_mbus_fmt = sh_csi2_s_fmt, |
| 130 | .try_mbus_fmt = sh_csi2_try_fmt, |
| 131 | }; |
| 132 | |
| 133 | static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops; |
| 134 | |
| 135 | static struct v4l2_subdev_ops sh_csi2_subdev_ops = { |
| 136 | .core = &sh_csi2_subdev_core_ops, |
| 137 | .video = &sh_csi2_subdev_video_ops, |
| 138 | }; |
| 139 | |
| 140 | static void sh_csi2_hwinit(struct sh_csi2 *priv) |
| 141 | { |
| 142 | struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; |
| 143 | __u32 tmp = 0x10; /* Enable MIPI CSI clock lane */ |
| 144 | |
| 145 | /* Reflect registers immediately */ |
| 146 | iowrite32(0x00000001, priv->base + SH_CSI2_TREF); |
| 147 | /* reset CSI2 harware */ |
| 148 | iowrite32(0x00000001, priv->base + SH_CSI2_SRST); |
| 149 | udelay(5); |
| 150 | iowrite32(0x00000000, priv->base + SH_CSI2_SRST); |
| 151 | |
| 152 | if (priv->client->lanes & 3) |
| 153 | tmp |= priv->client->lanes & 3; |
| 154 | else |
| 155 | /* Default - both lanes */ |
| 156 | tmp |= 3; |
| 157 | |
| 158 | if (priv->client->phy == SH_CSI2_PHY_MAIN) |
| 159 | tmp |= 0x8000; |
| 160 | |
| 161 | iowrite32(tmp, priv->base + SH_CSI2_PHYCNT); |
| 162 | |
| 163 | tmp = 0; |
| 164 | if (pdata->flags & SH_CSI2_ECC) |
| 165 | tmp |= 2; |
| 166 | if (pdata->flags & SH_CSI2_CRC) |
| 167 | tmp |= 1; |
| 168 | iowrite32(tmp, priv->base + SH_CSI2_CHKSUM); |
| 169 | } |
| 170 | |
| 171 | static int sh_csi2_set_bus_param(struct soc_camera_device *icd, |
| 172 | unsigned long flags) |
| 173 | { |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | static unsigned long sh_csi2_query_bus_param(struct soc_camera_device *icd) |
| 178 | { |
| 179 | struct soc_camera_link *icl = to_soc_camera_link(icd); |
| 180 | const unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | |
| 181 | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | |
| 182 | SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_DATA_ACTIVE_HIGH; |
| 183 | |
| 184 | return soc_camera_apply_sensor_flags(icl, flags); |
| 185 | } |
| 186 | |
| 187 | static int sh_csi2_notify(struct notifier_block *nb, |
| 188 | unsigned long action, void *data) |
| 189 | { |
| 190 | struct device *dev = data; |
| 191 | struct soc_camera_device *icd = to_soc_camera_dev(dev); |
| 192 | struct v4l2_device *v4l2_dev = dev_get_drvdata(dev->parent); |
| 193 | struct sh_csi2 *priv = |
| 194 | container_of(nb, struct sh_csi2, notifier); |
| 195 | struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; |
| 196 | int ret, i; |
| 197 | |
| 198 | for (i = 0; i < pdata->num_clients; i++) |
| 199 | if (&pdata->clients[i].pdev->dev == icd->pdev) |
| 200 | break; |
| 201 | |
| 202 | dev_dbg(dev, "%s(%p): action = %lu, found #%d\n", __func__, dev, action, i); |
| 203 | |
| 204 | if (i == pdata->num_clients) |
| 205 | return NOTIFY_DONE; |
| 206 | |
| 207 | switch (action) { |
| 208 | case BUS_NOTIFY_BOUND_DRIVER: |
| 209 | snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s", |
| 210 | dev_name(v4l2_dev->dev), ".mipi-csi"); |
| 211 | ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev); |
| 212 | dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret); |
| 213 | if (ret < 0) |
| 214 | return NOTIFY_DONE; |
| 215 | |
| 216 | priv->client = pdata->clients + i; |
| 217 | |
| 218 | icd->ops->set_bus_param = sh_csi2_set_bus_param; |
| 219 | icd->ops->query_bus_param = sh_csi2_query_bus_param; |
| 220 | |
| 221 | pm_runtime_get_sync(v4l2_get_subdevdata(&priv->subdev)); |
| 222 | |
| 223 | sh_csi2_hwinit(priv); |
| 224 | break; |
| 225 | case BUS_NOTIFY_UNBIND_DRIVER: |
| 226 | priv->client = NULL; |
| 227 | |
| 228 | /* Driver is about to be unbound */ |
| 229 | icd->ops->set_bus_param = NULL; |
| 230 | icd->ops->query_bus_param = NULL; |
| 231 | |
| 232 | v4l2_device_unregister_subdev(&priv->subdev); |
| 233 | |
| 234 | pm_runtime_put(v4l2_get_subdevdata(&priv->subdev)); |
| 235 | break; |
| 236 | } |
| 237 | |
| 238 | return NOTIFY_OK; |
| 239 | } |
| 240 | |
| 241 | static __devinit int sh_csi2_probe(struct platform_device *pdev) |
| 242 | { |
| 243 | struct resource *res; |
| 244 | unsigned int irq; |
| 245 | int ret; |
| 246 | struct sh_csi2 *priv; |
| 247 | /* Platform data specify the PHY, lanes, ECC, CRC */ |
| 248 | struct sh_csi2_pdata *pdata = pdev->dev.platform_data; |
| 249 | |
| 250 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 251 | /* Interrupt unused so far */ |
| 252 | irq = platform_get_irq(pdev, 0); |
| 253 | |
| 254 | if (!res || (int)irq <= 0 || !pdata) { |
| 255 | dev_err(&pdev->dev, "Not enough CSI2 platform resources.\n"); |
| 256 | return -ENODEV; |
| 257 | } |
| 258 | |
| 259 | /* TODO: Add support for CSI2I. Careful: different register layout! */ |
| 260 | if (pdata->type != SH_CSI2C) { |
| 261 | dev_err(&pdev->dev, "Only CSI2C supported ATM.\n"); |
| 262 | return -EINVAL; |
| 263 | } |
| 264 | |
| 265 | priv = kzalloc(sizeof(struct sh_csi2), GFP_KERNEL); |
| 266 | if (!priv) |
| 267 | return -ENOMEM; |
| 268 | |
| 269 | priv->irq = irq; |
| 270 | priv->notifier.notifier_call = sh_csi2_notify; |
| 271 | |
| 272 | /* We MUST attach after the MIPI sensor */ |
| 273 | ret = bus_register_notifier(&soc_camera_bus_type, &priv->notifier); |
| 274 | if (ret < 0) { |
| 275 | dev_err(&pdev->dev, "CSI2 cannot register notifier\n"); |
| 276 | goto ernotify; |
| 277 | } |
| 278 | |
| 279 | if (!request_mem_region(res->start, resource_size(res), pdev->name)) { |
| 280 | dev_err(&pdev->dev, "CSI2 register region already claimed\n"); |
| 281 | ret = -EBUSY; |
| 282 | goto ereqreg; |
| 283 | } |
| 284 | |
| 285 | priv->base = ioremap(res->start, resource_size(res)); |
| 286 | if (!priv->base) { |
| 287 | ret = -ENXIO; |
| 288 | dev_err(&pdev->dev, "Unable to ioremap CSI2 registers.\n"); |
| 289 | goto eremap; |
| 290 | } |
| 291 | |
| 292 | priv->pdev = pdev; |
| 293 | |
| 294 | v4l2_subdev_init(&priv->subdev, &sh_csi2_subdev_ops); |
| 295 | v4l2_set_subdevdata(&priv->subdev, &pdev->dev); |
| 296 | |
| 297 | platform_set_drvdata(pdev, priv); |
| 298 | |
| 299 | pm_runtime_enable(&pdev->dev); |
| 300 | |
| 301 | dev_dbg(&pdev->dev, "CSI2 probed.\n"); |
| 302 | |
| 303 | return 0; |
| 304 | |
| 305 | eremap: |
| 306 | release_mem_region(res->start, resource_size(res)); |
| 307 | ereqreg: |
| 308 | bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier); |
| 309 | ernotify: |
| 310 | kfree(priv); |
| 311 | |
| 312 | return ret; |
| 313 | } |
| 314 | |
| 315 | static __devexit int sh_csi2_remove(struct platform_device *pdev) |
| 316 | { |
| 317 | struct sh_csi2 *priv = platform_get_drvdata(pdev); |
| 318 | struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 319 | |
| 320 | bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier); |
| 321 | pm_runtime_disable(&pdev->dev); |
| 322 | iounmap(priv->base); |
| 323 | release_mem_region(res->start, resource_size(res)); |
| 324 | platform_set_drvdata(pdev, NULL); |
| 325 | kfree(priv); |
| 326 | |
| 327 | return 0; |
| 328 | } |
| 329 | |
| 330 | static struct platform_driver __refdata sh_csi2_pdrv = { |
| 331 | .remove = __devexit_p(sh_csi2_remove), |
| 332 | .driver = { |
| 333 | .name = "sh-mobile-csi2", |
| 334 | .owner = THIS_MODULE, |
| 335 | }, |
| 336 | }; |
| 337 | |
| 338 | static int __init sh_csi2_init(void) |
| 339 | { |
| 340 | return platform_driver_probe(&sh_csi2_pdrv, sh_csi2_probe); |
| 341 | } |
| 342 | |
| 343 | static void __exit sh_csi2_exit(void) |
| 344 | { |
| 345 | platform_driver_unregister(&sh_csi2_pdrv); |
| 346 | } |
| 347 | |
| 348 | module_init(sh_csi2_init); |
| 349 | module_exit(sh_csi2_exit); |
| 350 | |
| 351 | MODULE_DESCRIPTION("SH-Mobile MIPI CSI-2 driver"); |
| 352 | MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| 353 | MODULE_LICENSE("GPL v2"); |
| 354 | MODULE_ALIAS("platform:sh-mobile-csi2"); |