drivers/leds/leds-qpnp.c

/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/spmi.h>
#include <linux/qpnp/pwm.h>
#include <linux/workqueue.h>

#define WLED_MOD_EN_REG(base, n)	(base + 0x60 + n*0x10)
#define WLED_IDAC_DLY_REG(base, n)	(WLED_MOD_EN_REG(base, n) + 0x01)
#define WLED_FULL_SCALE_REG(base, n)	(WLED_IDAC_DLY_REG(base, n) + 0x01)

/* wled control registers */
#define WLED_BRIGHTNESS_CNTL_LSB(base, n)	(base + 0x40 + 2*n)
#define WLED_BRIGHTNESS_CNTL_MSB(base, n)	(base + 0x41 + 2*n)
#define WLED_MOD_CTRL_REG(base)			(base + 0x46)
#define WLED_SYNC_REG(base)			(base + 0x47)
#define WLED_FDBCK_CTRL_REG(base)		(base + 0x48)
#define WLED_SWITCHING_FREQ_REG(base)		(base + 0x4C)
#define WLED_OVP_CFG_REG(base)			(base + 0x4D)
#define WLED_BOOST_LIMIT_REG(base)		(base + 0x4E)
#define WLED_CURR_SINK_REG(base)		(base + 0x4F)
#define WLED_HIGH_POLE_CAP_REG(base)		(base + 0x58)
#define WLED_CURR_SINK_MASK		0xE0
#define WLED_CURR_SINK_SHFT		0x05
#define WLED_SWITCH_FREQ_MASK		0x02
#define WLED_OVP_VAL_MASK		0x03
#define WLED_OVP_VAL_BIT_SHFT		0x00
#define WLED_BOOST_LIMIT_MASK		0x07
#define WLED_BOOST_LIMIT_BIT_SHFT	0x00
#define WLED_BOOST_ON			0x80
#define WLED_BOOST_OFF			0x00
#define WLED_EN_MASK			0x80
#define WLED_NO_MASK			0x00
#define WLED_CP_SELECT_MAX		0x03
#define WLED_CP_SELECT_MASK		0x02
#define WLED_USE_EXT_GEN_MOD_SRC	0x01
#define WLED_CTL_DLY_STEP		200
#define WLED_CTL_DLY_MAX		1400
#define WLED_MAX_CURR			25
#define WLED_MSB_MASK			0x0F
#define WLED_MAX_CURR_MASK		0x19
#define WLED_OP_FDBCK_MASK		0x07
#define WLED_OP_FDBCK_BIT_SHFT		0x00

#define WLED_MAX_LEVEL			255
#define WLED_8_BIT_MASK			0xFF
#define WLED_4_BIT_MASK			0x0F
#define WLED_8_BIT_SHFT			0x08
#define WLED_MAX_DUTY_CYCLE		0xFFF

#define WLED_SYNC_VAL			0x07
#define WLED_SYNC_RESET_VAL		0x00

#define WLED_DEFAULT_STRINGS		0x01
#define WLED_DEFAULT_OVP_VAL		0x02
#define WLED_BOOST_LIM_DEFAULT		0x03
#define WLED_CP_SEL_DEFAULT		0x00
#define WLED_CTRL_DLY_DEFAULT		0x00
#define WLED_SWITCH_FREQ_DEFAULT	0x02

#define FLASH_SAFETY_TIMER(base)	(base + 0x40)
#define FLASH_MAX_CURR(base)		(base + 0x41)
#define FLASH_LED_0_CURR(base)		(base + 0x42)
#define FLASH_LED_1_CURR(base)		(base + 0x43)
#define FLASH_CLAMP_CURR(base)		(base + 0x44)
#define FLASH_LED_TMR_CTRL(base)	(base + 0x48)
#define FLASH_HEADROOM(base)		(base + 0x49)
#define FLASH_STARTUP_DELAY(base)	(base + 0x4B)
#define FLASH_MASK_ENABLE(base)		(base + 0x4C)
#define FLASH_VREG_OK_FORCE(base)	(base + 0x4F)
#define FLASH_ENABLE_CONTROL(base)	(base + 0x46)
#define FLASH_LED_STROBE_CTRL(base)	(base + 0x47)

#define FLASH_MAX_LEVEL			0x4F
#define	FLASH_NO_MASK			0x00

#define FLASH_MASK_1			0x20
#define FLASH_MASK_REG_MASK		0xE0
#define FLASH_HEADROOM_MASK		0x03
#define FLASH_SAFETY_TIMER_MASK		0x7F
#define FLASH_CURRENT_MASK		0xFF
#define FLASH_TMR_MASK			0x03
#define FLASH_TMR_WATCHDOG		0x03
#define FLASH_TMR_SAFETY		0x00

#define FLASH_HW_VREG_OK		0x80
#define FLASH_VREG_MASK			0xC0

#define FLASH_STARTUP_DLY_MASK		0x02

#define FLASH_ENABLE_ALL		0xE0
#define FLASH_ENABLE_MODULE		0x80
#define FLASH_ENABLE_MODULE_MASK	0x80
#define FLASH_DISABLE_ALL		0x00
#define FLASH_ENABLE_MASK		0x60
#define FLASH_ENABLE_LED_0		0x40
#define FLASH_ENABLE_LED_1		0x20
#define FLASH_INIT_MASK			0xE0

#define FLASH_STROBE_ALL		0xC0
#define FLASH_STROBE_MASK		0xC0
#define FLASH_LED_0_OUTPUT		0x80
#define FLASH_LED_1_OUTPUT		0x40

#define FLASH_CURRENT_PRGM_MIN		1
#define FLASH_CURRENT_PRGM_SHIFT	1

#define FLASH_DURATION_200ms		0x13
#define FLASH_CLAMP_200mA		0x0F

#define LED_TRIGGER_DEFAULT		"none"

#define RGB_LED_SRC_SEL(base)		(base + 0x45)
#define RGB_LED_EN_CTL(base)		(base + 0x46)
#define RGB_LED_ATC_CTL(base)		(base + 0x47)

#define RGB_MAX_LEVEL			LED_FULL
#define RGB_LED_ENABLE_RED		0x80
#define RGB_LED_ENABLE_GREEN		0x40
#define RGB_LED_ENABLE_BLUE		0x20
#define RGB_LED_SOURCE_VPH_PWR		0x01
#define RGB_LED_ENABLE_MASK		0xE0
#define RGB_LED_SRC_MASK		0x03
#define QPNP_LED_PWM_FLAGS	(PM_PWM_LUT_LOOP | PM_PWM_LUT_RAMP_UP)
#define	PWM_LUT_MAX_SIZE		63
#define RGB_LED_DISABLE			0x00

/**
 * enum qpnp_leds - QPNP supported led ids
 * @QPNP_ID_WLED - White led backlight
 */
enum qpnp_leds {
	QPNP_ID_WLED = 0,
	QPNP_ID_FLASH1_LED0,
	QPNP_ID_FLASH1_LED1,
	QPNP_ID_RGB_RED,
	QPNP_ID_RGB_GREEN,
	QPNP_ID_RGB_BLUE,
	QPNP_ID_MAX,
};

/* current boost limit */
enum wled_current_boost_limit {
	WLED_CURR_LIMIT_105mA,
	WLED_CURR_LIMIT_385mA,
	WLED_CURR_LIMIT_525mA,
	WLED_CURR_LIMIT_805mA,
	WLED_CURR_LIMIT_980mA,
	WLED_CURR_LIMIT_1260mA,
	WLED_CURR_LIMIT_1400mA,
	WLED_CURR_LIMIT_1680mA,
};

/* over voltage protection threshold */
enum wled_ovp_threshold {
	WLED_OVP_35V,
	WLED_OVP_32V,
	WLED_OVP_29V,
	WLED_OVP_37V,
};

/* switch frquency */
enum wled_switch_freq {
	WLED_800kHz = 0,
	WLED_960kHz,
	WLED_1600kHz,
	WLED_3200kHz,
};

enum flash_headroom {
	HEADROOM_250mV = 0,
	HEADROOM_300mV,
	HEADROOM_400mV,
	HEADROOM_500mV,
};

enum flash_startup_dly {
	DELAY_10us = 0,
	DELAY_32us,
	DELAY_64us,
	DELAY_128us,
};

enum rgb_mode {
	RGB_MODE_PWM = 0,
	RGB_MODE_LPG,
};

static u8 wled_debug_regs[] = {
	/* common registers */
	0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4d, 0x4e, 0x4f,
	0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59,
	/* LED1 */
	0x60, 0x61, 0x62, 0x63, 0x66,
	/* LED2 */
	0x70, 0x71, 0x72, 0x73, 0x76,
	/* LED3 */
	0x80, 0x81, 0x82, 0x83, 0x86,
};

static u8 flash_debug_regs[] = {
	0x40, 0x41, 0x42, 0x43, 0x44, 0x48, 0x49, 0x4b, 0x4c,
	0x4f, 0x46, 0x47,
};

static u8 rgb_pwm_debug_regs[] = {
	0x45, 0x46, 0x47,
};
/**
 *  wled_config_data - wled configuration data
 *  @num_strings - number of wled strings supported
 *  @ovp_val - over voltage protection threshold
 *  @boost_curr_lim - boot current limit
 *  @cp_select - high pole capacitance
 *  @ctrl_delay_us - delay in activation of led
 *  @dig_mod_gen_en - digital module generator
 *  @cs_out_en - current sink output enable
 *  @op_fdbck - selection of output as feedback for the boost
 */
struct wled_config_data {
	u8	num_strings;
	u8	ovp_val;
	u8	boost_curr_lim;
	u8	cp_select;
	u8	ctrl_delay_us;
	u8	switch_freq;
	bool	dig_mod_gen_en;
	bool	cs_out_en;
	bool	op_fdbck;
};

/**
 *  flash_config_data - flash configuration data
 *  @current_prgm - current to be programmed, scaled by max level
 *  @clamp_curr - clamp current to use
 *  @headroom - headroom value to use
 *  @duration - duration of the flash
 *  @enable_module - enable address for particular flash
 *  @trigger_flash - trigger flash
 *  @startup_dly - startup delay for flash
 *  @current_addr - address to write for current
 *  @second_addr - address of secondary flash to be written
 *  @safety_timer - enable safety timer or watchdog timer
 */
struct flash_config_data {
	u8	current_prgm;
	u8	clamp_curr;
	u8	headroom;
	u8	duration;
	u8	enable_module;
	u8	trigger_flash;
	u8	startup_dly;
	u16	current_addr;
	u16	second_addr;
	bool	safety_timer;
};

/**
 *  rgb_config_data - rgb configuration data
 *  @lut_params - lut parameters to be used by pwm driver
 *  @pwm_device - pwm device
 *  @pwm_channel - pwm channel to be configured for led
 *  @pwm_period_us - period for pwm, in us
 *  @mode - mode the led operates in
 */
struct rgb_config_data {
	struct lut_params	lut_params;
	struct pwm_device	*pwm_dev;
	int			pwm_channel;
	u32			pwm_period_us;
	struct pwm_duty_cycles	*duty_cycles;
	u8	mode;
	u8	enable;
};

/**
 * struct qpnp_led_data - internal led data structure
 * @led_classdev - led class device
 * @delayed_work - delayed work for turning off the LED
 * @id - led index
 * @base_reg - base register given in device tree
 * @lock - to protect the transactions
 * @reg - cached value of led register
 * @num_leds - number of leds in the module
 * @max_current - maximum current supported by LED
 * @default_on - true: default state max, false, default state 0
 * @turn_off_delay_ms - number of msec before turning off the LED
 */
struct qpnp_led_data {
	struct led_classdev	cdev;
	struct spmi_device	*spmi_dev;
	struct delayed_work	dwork;
	int			id;
	u16			base;
	u8			reg;
	u8			num_leds;
	spinlock_t		lock;
	struct wled_config_data *wled_cfg;
	struct flash_config_data	*flash_cfg;
	struct rgb_config_data	*rgb_cfg;
	int			max_current;
	bool			default_on;
	int			turn_off_delay_ms;
};

static int
qpnp_led_masked_write(struct qpnp_led_data *led, u16 addr, u8 mask, u8 val)
{
	int rc;
	u8 reg;

	rc = spmi_ext_register_readl(led->spmi_dev->ctrl, led->spmi_dev->sid,
		addr, &reg, 1);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Unable to read from addr=%x, rc(%d)\n", addr, rc);
	}

	reg &= ~mask;
	reg |= val;

	rc = spmi_ext_register_writel(led->spmi_dev->ctrl, led->spmi_dev->sid,
		addr, &reg, 1);
	if (rc)
		dev_err(&led->spmi_dev->dev,
			"Unable to write to addr=%x, rc(%d)\n", addr, rc);
	return rc;
}

static void qpnp_dump_regs(struct qpnp_led_data *led, u8 regs[], u8 array_size)
{
	int i;
	u8 val;

	pr_debug("===== %s LED register dump start =====\n", led->cdev.name);
	for (i = 0; i < array_size; i++) {
		spmi_ext_register_readl(led->spmi_dev->ctrl,
					led->spmi_dev->sid,
					led->base + regs[i],
					&val, sizeof(val));
		pr_debug("0x%x = 0x%x\n", led->base + regs[i], val);
	}
	pr_debug("===== %s LED register dump end =====\n", led->cdev.name);
}

static int qpnp_wled_set(struct qpnp_led_data *led)
{
	int rc, duty;
	u8 level, val, i, num_wled_strings;

	level = led->cdev.brightness;

	if (level > WLED_MAX_LEVEL)
		level = WLED_MAX_LEVEL;
	if (level == 0) {
		val = WLED_BOOST_OFF;
		rc = spmi_ext_register_writel(led->spmi_dev->ctrl,
			led->spmi_dev->sid, WLED_MOD_CTRL_REG(led->base),
			&val, 1);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"WLED write ctrl reg failed(%d)\n", rc);
			return rc;
		}
	} else {
		val = WLED_BOOST_ON;
		rc = spmi_ext_register_writel(led->spmi_dev->ctrl,
			led->spmi_dev->sid, WLED_MOD_CTRL_REG(led->base),
			&val, 1);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"WLED write ctrl reg failed(%d)\n", rc);
			return rc;
		}
	}

	duty = (WLED_MAX_DUTY_CYCLE * level) / WLED_MAX_LEVEL;

	num_wled_strings = led->wled_cfg->num_strings;

	/* program brightness control registers */
	for (i = 0; i < num_wled_strings; i++) {
		rc = qpnp_led_masked_write(led,
			WLED_BRIGHTNESS_CNTL_MSB(led->base, i), WLED_MSB_MASK,
			(duty >> WLED_8_BIT_SHFT) & WLED_4_BIT_MASK);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"WLED set brightness MSB failed(%d)\n", rc);
			return rc;
		}
		val = duty & WLED_8_BIT_MASK;
		rc = spmi_ext_register_writel(led->spmi_dev->ctrl,
			led->spmi_dev->sid,
			WLED_BRIGHTNESS_CNTL_LSB(led->base, i), &val, 1);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"WLED set brightness LSB failed(%d)\n", rc);
			return rc;
		}
	}

	/* sync */
	val = WLED_SYNC_VAL;
	rc = spmi_ext_register_writel(led->spmi_dev->ctrl, led->spmi_dev->sid,
		WLED_SYNC_REG(led->base), &val, 1);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
				"WLED set sync reg failed(%d)\n", rc);
		return rc;
	}

	val = WLED_SYNC_RESET_VAL;
	rc = spmi_ext_register_writel(led->spmi_dev->ctrl, led->spmi_dev->sid,
		WLED_SYNC_REG(led->base), &val, 1);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
				"WLED reset sync reg failed(%d)\n", rc);
		return rc;
	}
	return 0;
}

static int qpnp_flash_set(struct qpnp_led_data *led)
{
	int rc;
	int val = led->cdev.brightness;

	led->flash_cfg->current_prgm = (val * FLASH_MAX_LEVEL /
						led->max_current);

	led->flash_cfg->current_prgm =
		led->flash_cfg->current_prgm >> FLASH_CURRENT_PRGM_SHIFT;
	if (!led->flash_cfg->current_prgm)
		led->flash_cfg->current_prgm = FLASH_CURRENT_PRGM_MIN;

	/* Set led current */
	if (val > 0) {
		rc = qpnp_led_masked_write(led, led->flash_cfg->current_addr,
			FLASH_CURRENT_MASK, led->flash_cfg->current_prgm);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"Current reg write failed(%d)\n", rc);
			return rc;
		}

		rc = qpnp_led_masked_write(led, led->flash_cfg->second_addr,
			FLASH_CURRENT_MASK, led->flash_cfg->current_prgm);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"Current reg write failed(%d)\n", rc);
			return rc;
		}

		rc = qpnp_led_masked_write(led, FLASH_ENABLE_CONTROL(led->base),
			FLASH_ENABLE_MASK,
			FLASH_ENABLE_ALL);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"Enable reg write failed(%d)\n", rc);
			return rc;
		}
		rc = qpnp_led_masked_write(led,
			FLASH_LED_STROBE_CTRL(led->base),
			FLASH_STROBE_MASK, FLASH_STROBE_ALL);

		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"LED %d flash write failed(%d)\n", led->id, rc);
			return rc;
		}
	} else {
		rc = qpnp_led_masked_write(led, FLASH_ENABLE_CONTROL(led->base),
			FLASH_ENABLE_MASK,
			FLASH_DISABLE_ALL);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"Enable reg write failed(%d)\n", rc);
			return rc;
		}

		rc = qpnp_led_masked_write(led,
			FLASH_LED_STROBE_CTRL(led->base),
			FLASH_STROBE_MASK,
			FLASH_DISABLE_ALL);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"LED %d flash write failed(%d)\n", led->id, rc);
			return rc;
		}
	}

	qpnp_dump_regs(led, flash_debug_regs, ARRAY_SIZE(flash_debug_regs));

	return 0;
}

static int qpnp_rgb_set(struct qpnp_led_data *led)
{
	int duty_us;
	int rc;

	if (led->cdev.brightness) {
		if (led->rgb_cfg->mode == RGB_MODE_PWM) {
			duty_us = (led->rgb_cfg->pwm_period_us *
				led->cdev.brightness) / LED_FULL;
			rc = pwm_config(led->rgb_cfg->pwm_dev, duty_us,
					led->rgb_cfg->pwm_period_us);
			if (rc < 0) {
				dev_err(&led->spmi_dev->dev, "Failed to " \
					"configure pwm for new values\n");
				return rc;
			}
		}
		rc = qpnp_led_masked_write(led,
			RGB_LED_EN_CTL(led->base),
			led->rgb_cfg->enable, led->rgb_cfg->enable);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"Failed to write led enable reg\n");
			return rc;
		}
		rc = pwm_enable(led->rgb_cfg->pwm_dev);
	} else {
		pwm_disable(led->rgb_cfg->pwm_dev);
		rc = qpnp_led_masked_write(led,
			RGB_LED_EN_CTL(led->base),
			led->rgb_cfg->enable, RGB_LED_DISABLE);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"Failed to write led enable reg\n");
			return rc;
		}
	}

	qpnp_dump_regs(led, rgb_pwm_debug_regs, ARRAY_SIZE(rgb_pwm_debug_regs));

	return 0;
}

static void qpnp_led_set(struct led_classdev *led_cdev,
				enum led_brightness value)
{
	int rc;
	struct qpnp_led_data *led;

	led = container_of(led_cdev, struct qpnp_led_data, cdev);
	if (value < LED_OFF || value > led->cdev.max_brightness) {
		dev_err(&led->spmi_dev->dev, "Invalid brightness value\n");
		return;
	}

	spin_lock(&led->lock);
	led->cdev.brightness = value;

	switch (led->id) {
	case QPNP_ID_WLED:
		rc = qpnp_wled_set(led);
		if (rc < 0)
			dev_err(&led->spmi_dev->dev,
				"WLED set brightness failed (%d)\n", rc);
		break;
	case QPNP_ID_FLASH1_LED0:
	case QPNP_ID_FLASH1_LED1:
		rc = qpnp_flash_set(led);
		if (rc < 0)
			dev_err(&led->spmi_dev->dev,
				"FLASH set brightness failed (%d)\n", rc);
		break;
	case QPNP_ID_RGB_RED:
	case QPNP_ID_RGB_GREEN:
	case QPNP_ID_RGB_BLUE:
		rc = qpnp_rgb_set(led);
		if (rc < 0)
			dev_err(&led->spmi_dev->dev,
				"RGB set brightness failed (%d)\n", rc);
		break;
	default:
		dev_err(&led->spmi_dev->dev, "Invalid LED(%d)\n", led->id);
		break;
	}
	spin_unlock(&led->lock);
}

static int __devinit qpnp_led_set_max_brightness(struct qpnp_led_data *led)
{
	switch (led->id) {
	case QPNP_ID_WLED:
		led->cdev.max_brightness = WLED_MAX_LEVEL;
		break;
	case QPNP_ID_FLASH1_LED0:
	case QPNP_ID_FLASH1_LED1:
		led->cdev.max_brightness = led->max_current;
		break;
	case QPNP_ID_RGB_RED:
	case QPNP_ID_RGB_GREEN:
	case QPNP_ID_RGB_BLUE:
		led->cdev.max_brightness = RGB_MAX_LEVEL;
		break;
	default:
		dev_err(&led->spmi_dev->dev, "Invalid LED(%d)\n", led->id);
		return -EINVAL;
	}

	return 0;
}

static enum led_brightness qpnp_led_get(struct led_classdev *led_cdev)
{
	struct qpnp_led_data *led;

	led = container_of(led_cdev, struct qpnp_led_data, cdev);

	return led->cdev.brightness;
}

static void qpnp_led_turn_off_delayed(struct work_struct *work)
{
	struct delayed_work *dwork = to_delayed_work(work);
	struct qpnp_led_data *led
		= container_of(dwork, struct qpnp_led_data, dwork);

	led->cdev.brightness = LED_OFF;
	qpnp_led_set(&led->cdev, led->cdev.brightness);
}

static void qpnp_led_turn_off(struct qpnp_led_data *led)
{
	INIT_DELAYED_WORK(&led->dwork, qpnp_led_turn_off_delayed);
	schedule_delayed_work(&led->dwork,
		msecs_to_jiffies(led->turn_off_delay_ms));
}

static int __devinit qpnp_wled_init(struct qpnp_led_data *led)
{
	int rc, i;
	u8 num_wled_strings;

	num_wled_strings = led->wled_cfg->num_strings;

	/* verify ranges */
	if (led->wled_cfg->ovp_val > WLED_OVP_37V) {
		dev_err(&led->spmi_dev->dev, "Invalid ovp value\n");
		return -EINVAL;
	}

	if (led->wled_cfg->boost_curr_lim > WLED_CURR_LIMIT_1680mA) {
		dev_err(&led->spmi_dev->dev, "Invalid boost current limit\n");
		return -EINVAL;
	}

	if (led->wled_cfg->cp_select > WLED_CP_SELECT_MAX) {
		dev_err(&led->spmi_dev->dev, "Invalid pole capacitance\n");
		return -EINVAL;
	}

	if ((led->max_current > WLED_MAX_CURR)) {
		dev_err(&led->spmi_dev->dev, "Invalid max current\n");
		return -EINVAL;
	}

	if ((led->wled_cfg->ctrl_delay_us % WLED_CTL_DLY_STEP) ||
		(led->wled_cfg->ctrl_delay_us > WLED_CTL_DLY_MAX)) {
		dev_err(&led->spmi_dev->dev, "Invalid control delay\n");
		return -EINVAL;
	}

	/* program over voltage protection threshold */
	rc = qpnp_led_masked_write(led, WLED_OVP_CFG_REG(led->base),
		WLED_OVP_VAL_MASK,
		(led->wled_cfg->ovp_val << WLED_OVP_VAL_BIT_SHFT));
	if (rc) {
		dev_err(&led->spmi_dev->dev,
				"WLED OVP reg write failed(%d)\n", rc);
		return rc;
	}

	/* program current boost limit */
	rc = qpnp_led_masked_write(led, WLED_BOOST_LIMIT_REG(led->base),
		WLED_BOOST_LIMIT_MASK, led->wled_cfg->boost_curr_lim);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
				"WLED boost limit reg write failed(%d)\n", rc);
		return rc;
	}

	/* program output feedback */
	rc = qpnp_led_masked_write(led, WLED_FDBCK_CTRL_REG(led->base),
		WLED_OP_FDBCK_MASK,
		(led->wled_cfg->op_fdbck << WLED_OP_FDBCK_BIT_SHFT));
	if (rc) {
		dev_err(&led->spmi_dev->dev,
				"WLED fdbck ctrl reg write failed(%d)\n", rc);
		return rc;
	}

	/* program switch frequency */
	rc = qpnp_led_masked_write(led, WLED_SWITCHING_FREQ_REG(led->base),
		WLED_SWITCH_FREQ_MASK, led->wled_cfg->switch_freq);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
				"WLED switch freq reg write failed(%d)\n", rc);
		return rc;
	}

	/* program current sink */
	if (led->wled_cfg->cs_out_en) {
		rc = qpnp_led_masked_write(led, WLED_CURR_SINK_REG(led->base),
			WLED_CURR_SINK_MASK,
			(((1 << led->wled_cfg->num_strings) - 1)
			<< WLED_CURR_SINK_SHFT));
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"WLED curr sink reg write failed(%d)\n", rc);
			return rc;
		}
	}

	/* program high pole capacitance */
	rc = qpnp_led_masked_write(led, WLED_HIGH_POLE_CAP_REG(led->base),
		WLED_CP_SELECT_MASK, led->wled_cfg->cp_select);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
				"WLED pole cap reg write failed(%d)\n", rc);
		return rc;
	}

	/* program modulator, current mod src and cabc */
	for (i = 0; i < num_wled_strings; i++) {
		rc = qpnp_led_masked_write(led, WLED_MOD_EN_REG(led->base, i),
			WLED_NO_MASK, WLED_EN_MASK);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"WLED mod enable reg write failed(%d)\n", rc);
			return rc;
		}

		if (led->wled_cfg->dig_mod_gen_en) {
			rc = qpnp_led_masked_write(led,
				WLED_MOD_EN_REG(led->base, i),
				WLED_NO_MASK, WLED_USE_EXT_GEN_MOD_SRC);
			if (rc) {
				dev_err(&led->spmi_dev->dev,
				"WLED dig mod en reg write failed(%d)\n", rc);
			}
		}

		rc = qpnp_led_masked_write(led,
			WLED_FULL_SCALE_REG(led->base, i), WLED_MAX_CURR_MASK,
			led->max_current);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"WLED max current reg write failed(%d)\n", rc);
			return rc;
		}

	}

	/* dump wled registers */
	qpnp_dump_regs(led, wled_debug_regs, ARRAY_SIZE(wled_debug_regs));

	return 0;
}

static int __devinit qpnp_flash_init(struct qpnp_led_data *led)
{
	int rc;

	rc = qpnp_led_masked_write(led,
		FLASH_LED_STROBE_CTRL(led->base),
		FLASH_STROBE_MASK, FLASH_DISABLE_ALL);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"LED %d flash write failed(%d)\n", led->id, rc);
		return rc;
	}
	rc = qpnp_led_masked_write(led, FLASH_ENABLE_CONTROL(led->base),
		FLASH_INIT_MASK, FLASH_ENABLE_MODULE);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Enable reg write failed(%d)\n", rc);
		return rc;
	}

	/* Set flash safety timer */
	rc = qpnp_led_masked_write(led, FLASH_SAFETY_TIMER(led->base),
		FLASH_SAFETY_TIMER_MASK, led->flash_cfg->duration);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Safety timer reg write failed(%d)\n", rc);
		return rc;
	}

	/* Set max current */
	rc = qpnp_led_masked_write(led, FLASH_MAX_CURR(led->base),
		FLASH_CURRENT_MASK, FLASH_MAX_LEVEL);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Max current reg write failed(%d)\n", rc);
		return rc;
	}
	/* Set clamp current */
	rc = qpnp_led_masked_write(led, FLASH_CLAMP_CURR(led->base),
		FLASH_CURRENT_MASK, led->flash_cfg->clamp_curr);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Clamp current reg write failed(%d)\n", rc);
		return rc;
	}

	/* Set timer control - safety or watchdog */
	if (led->flash_cfg->safety_timer)
		rc = qpnp_led_masked_write(led, FLASH_LED_TMR_CTRL(led->base),
			FLASH_TMR_MASK, FLASH_TMR_SAFETY);
	else
		rc = qpnp_led_masked_write(led, FLASH_LED_TMR_CTRL(led->base),
			FLASH_TMR_MASK, FLASH_TMR_WATCHDOG);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"LED timer ctrl reg write failed(%d)\n", rc);
		return rc;
	}
	/* Set headroom */
	rc = qpnp_led_masked_write(led, FLASH_HEADROOM(led->base),
		FLASH_HEADROOM_MASK, led->flash_cfg->headroom);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Headroom reg write failed(%d)\n", rc);
		return rc;
	}

	/* Set mask enable */
	rc = qpnp_led_masked_write(led, FLASH_MASK_ENABLE(led->base),
		FLASH_MASK_REG_MASK, FLASH_MASK_1);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Mask enable reg write failed(%d)\n", rc);
		return rc;
	}

	/* Set startup delay */
	rc = qpnp_led_masked_write(led, FLASH_STARTUP_DELAY(led->base),
		FLASH_STARTUP_DLY_MASK, led->flash_cfg->startup_dly);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Startup delay reg write failed(%d)\n", rc);
		return rc;
	}

	rc = qpnp_led_masked_write(led, FLASH_VREG_OK_FORCE(led->base),
		FLASH_VREG_MASK, FLASH_HW_VREG_OK);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Vreg OK reg write failed(%d)\n", rc);
		return rc;
	}

	/* Set led current and enable module */
	rc = qpnp_led_masked_write(led, led->flash_cfg->current_addr,
		FLASH_CURRENT_MASK, led->flash_cfg->current_prgm);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Current reg write failed(%d)\n", rc);
		return rc;
	}

	rc = qpnp_led_masked_write(led, FLASH_ENABLE_CONTROL(led->base),
		FLASH_ENABLE_MODULE_MASK, FLASH_ENABLE_MODULE);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Enable reg write failed(%d)\n", rc);
		return rc;
	}
	/* dump flash registers */
	qpnp_dump_regs(led, flash_debug_regs, ARRAY_SIZE(flash_debug_regs));

	return 0;
}

static int __devinit qpnp_rgb_init(struct qpnp_led_data *led)
{
	int rc, start_idx, idx_len;

	rc = qpnp_led_masked_write(led, RGB_LED_SRC_SEL(led->base),
		RGB_LED_SRC_MASK, RGB_LED_SOURCE_VPH_PWR);
	if (rc) {
		dev_err(&led->spmi_dev->dev,
			"Failed to write led source select register\n");
		return rc;
	}

	if (led->rgb_cfg->pwm_channel != -1) {
		led->rgb_cfg->pwm_dev =
			pwm_request(led->rgb_cfg->pwm_channel,
						led->cdev.name);

		if (IS_ERR_OR_NULL(led->rgb_cfg->pwm_dev)) {
			dev_err(&led->spmi_dev->dev,
				"could not acquire PWM Channel %d, " \
				"error %ld\n",
				led->rgb_cfg->pwm_channel,
				PTR_ERR(led->rgb_cfg->pwm_dev));
			led->rgb_cfg->pwm_dev = NULL;
			return -ENODEV;
		}

		if (led->rgb_cfg->mode == RGB_MODE_LPG) {
			start_idx =
			led->rgb_cfg->duty_cycles->start_idx;
			idx_len =
			led->rgb_cfg->duty_cycles->num_duty_pcts;

			if (idx_len >= PWM_LUT_MAX_SIZE &&
					start_idx) {
				dev_err(&led->spmi_dev->dev,
					"Wrong LUT size or index\n");
				return -EINVAL;
			}
			if ((start_idx + idx_len) >
					PWM_LUT_MAX_SIZE) {
				dev_err(&led->spmi_dev->dev,
					"Exceed LUT limit\n");
				return -EINVAL;
			}
			rc = pwm_lut_config(led->rgb_cfg->pwm_dev,
				led->rgb_cfg->pwm_period_us,
				led->rgb_cfg->duty_cycles->duty_pcts,
				led->rgb_cfg->lut_params);
			if (rc < 0) {
				dev_err(&led->spmi_dev->dev, "Failed to " \
					"configure pwm LUT\n");
				return rc;
			}
		}
	} else {
		dev_err(&led->spmi_dev->dev,
			"Invalid PWM channel\n");
		return -EINVAL;
	}

	/* Initialize led for use in auto trickle charging mode */
	rc = qpnp_led_masked_write(led, RGB_LED_ATC_CTL(led->base),
		led->rgb_cfg->enable, led->rgb_cfg->enable);

	return 0;
}

static int __devinit qpnp_led_initialize(struct qpnp_led_data *led)
{
	int rc;

	switch (led->id) {
	case QPNP_ID_WLED:
		rc = qpnp_wled_init(led);
		if (rc)
			dev_err(&led->spmi_dev->dev,
				"WLED initialize failed(%d)\n", rc);
		break;
	case QPNP_ID_FLASH1_LED0:
	case QPNP_ID_FLASH1_LED1:
		rc = qpnp_flash_init(led);
		if (rc)
			dev_err(&led->spmi_dev->dev,
				"FLASH initialize failed(%d)\n", rc);
		break;
	case QPNP_ID_RGB_RED:
	case QPNP_ID_RGB_GREEN:
	case QPNP_ID_RGB_BLUE:
		rc = qpnp_rgb_init(led);
		if (rc)
			dev_err(&led->spmi_dev->dev,
				"RGB initialize failed(%d)\n", rc);
		break;
	default:
		dev_err(&led->spmi_dev->dev, "Invalid LED(%d)\n", led->id);
		return -EINVAL;
	}

	return 0;
}

static int __devinit qpnp_get_common_configs(struct qpnp_led_data *led,
				struct device_node *node)
{
	int rc;
	u32 val;
	const char *temp_string;

	led->cdev.default_trigger = LED_TRIGGER_DEFAULT;
	rc = of_property_read_string(node, "linux,default-trigger",
		&temp_string);
	if (!rc)
		led->cdev.default_trigger = temp_string;
	else if (rc != -EINVAL)
		return rc;

	led->default_on = false;
	rc = of_property_read_string(node, "qcom,default-state",
		&temp_string);
	if (!rc) {
		if (strncmp(temp_string, "on", sizeof("on")) == 0)
			led->default_on = true;
	} else if (rc != -EINVAL)
		return rc;

	led->turn_off_delay_ms = 0;
	rc = of_property_read_u32(node, "qcom,turn-off-delay-ms", &val);
	if (!rc)
		led->turn_off_delay_ms = val;
	else if (rc != -EINVAL)
		return rc;

	return 0;
}

/*
 * Handlers for alternative sources of platform_data
 */
static int __devinit qpnp_get_config_wled(struct qpnp_led_data *led,
				struct device_node *node)
{
	u32 val;
	int rc;

	led->wled_cfg = devm_kzalloc(&led->spmi_dev->dev,
				sizeof(struct wled_config_data), GFP_KERNEL);
	if (!led->wled_cfg) {
		dev_err(&led->spmi_dev->dev, "Unable to allocate memory\n");
		return -ENOMEM;
	}

	led->wled_cfg->num_strings = WLED_DEFAULT_STRINGS;
	rc = of_property_read_u32(node, "qcom,num-strings", &val);
	if (!rc)
		led->wled_cfg->num_strings = (u8) val;
	else if (rc != -EINVAL)
		return rc;

	led->wled_cfg->ovp_val = WLED_DEFAULT_OVP_VAL;
	rc = of_property_read_u32(node, "qcom,ovp-val", &val);
	if (!rc)
		led->wled_cfg->ovp_val = (u8) val;
	else if (rc != -EINVAL)
		return rc;

	led->wled_cfg->boost_curr_lim = WLED_BOOST_LIM_DEFAULT;
	rc = of_property_read_u32(node, "qcom,boost-curr-lim", &val);
	if (!rc)
		led->wled_cfg->boost_curr_lim = (u8) val;
	else if (rc != -EINVAL)
		return rc;

	led->wled_cfg->cp_select = WLED_CP_SEL_DEFAULT;
	rc = of_property_read_u32(node, "qcom,cp-sel", &val);
	if (!rc)
		led->wled_cfg->cp_select = (u8) val;
	else if (rc != -EINVAL)
		return rc;

	led->wled_cfg->ctrl_delay_us = WLED_CTRL_DLY_DEFAULT;
	rc = of_property_read_u32(node, "qcom,ctrl-delay-us", &val);
	if (!rc)
		led->wled_cfg->ctrl_delay_us = (u8) val;
	else if (rc != -EINVAL)
		return rc;

	led->wled_cfg->switch_freq = WLED_SWITCH_FREQ_DEFAULT;
	rc = of_property_read_u32(node, "qcom,switch-freq", &val);
	if (!rc)
		led->wled_cfg->switch_freq = (u8) val;
	else if (rc != -EINVAL)
		return rc;

	led->wled_cfg->dig_mod_gen_en =
		of_property_read_bool(node, "qcom,dig-mod-gen-en");

	led->wled_cfg->cs_out_en =
		of_property_read_bool(node, "qcom,cs-out-en");

	led->wled_cfg->op_fdbck =
		of_property_read_bool(node, "qcom,op-fdbck");

	return 0;
}

static int __devinit qpnp_get_config_flash(struct qpnp_led_data *led,
				struct device_node *node)
{
	int rc;
	u32 val;

	led->flash_cfg = devm_kzalloc(&led->spmi_dev->dev,
				sizeof(struct flash_config_data), GFP_KERNEL);
	if (!led->flash_cfg) {
		dev_err(&led->spmi_dev->dev, "Unable to allocate memory\n");
		return -ENOMEM;
	}

	if (led->id == QPNP_ID_FLASH1_LED0) {
		led->flash_cfg->enable_module = FLASH_ENABLE_ALL;
		led->flash_cfg->current_addr = FLASH_LED_0_CURR(led->base);
		led->flash_cfg->second_addr = FLASH_LED_1_CURR(led->base);
		led->flash_cfg->trigger_flash = FLASH_LED_0_OUTPUT;
	} else if (led->id == QPNP_ID_FLASH1_LED1) {
		led->flash_cfg->enable_module = FLASH_ENABLE_ALL;
		led->flash_cfg->current_addr = FLASH_LED_1_CURR(led->base);
		led->flash_cfg->second_addr = FLASH_LED_0_CURR(led->base);
		led->flash_cfg->trigger_flash = FLASH_LED_1_OUTPUT;
	} else {
		dev_err(&led->spmi_dev->dev, "Unknown flash LED name given\n");
		return -EINVAL;
	}

	rc = of_property_read_u32(node, "qcom,current", &val);
	if (!rc)
		led->flash_cfg->current_prgm = (val *
				FLASH_MAX_LEVEL / led->max_current);
	else
		return -EINVAL;

	rc = of_property_read_u32(node, "qcom,headroom", &val);
	if (!rc)
		led->flash_cfg->headroom = (u8) val;
	else if (rc == -EINVAL)
		led->flash_cfg->headroom = HEADROOM_300mV;
	else
		return rc;

	rc = of_property_read_u32(node, "qcom,duration", &val);
	if (!rc)
		led->flash_cfg->duration = (((u8) val) - 10) / 10;
	else if (rc == -EINVAL)
		led->flash_cfg->duration = FLASH_DURATION_200ms;
	else
		return rc;

	rc = of_property_read_u32(node, "qcom,clamp-curr", &val);
	if (!rc)
		led->flash_cfg->clamp_curr = (val *
				FLASH_MAX_LEVEL / led->max_current);
	else if (rc == -EINVAL)
		led->flash_cfg->clamp_curr = FLASH_CLAMP_200mA;
	else
		return rc;

	rc = of_property_read_u32(node, "qcom,startup-dly", &val);
	if (!rc)
		led->flash_cfg->startup_dly = (u8) val;
	else if (rc == -EINVAL)
		led->flash_cfg->startup_dly = DELAY_32us;
	else
		return rc;

	led->flash_cfg->safety_timer =
		of_property_read_bool(node, "qcom,safety-timer");

	return 0;
}

static int __devinit qpnp_get_config_rgb(struct qpnp_led_data *led,
				struct device_node *node)
{
	struct property *prop;
	int rc, i;
	u32 val;
	u8 *temp_cfg;

	led->rgb_cfg = devm_kzalloc(&led->spmi_dev->dev,
				sizeof(struct rgb_config_data), GFP_KERNEL);
	if (!led->rgb_cfg) {
		dev_err(&led->spmi_dev->dev, "Unable to allocate memory\n");
		return -ENOMEM;
	}

	if (led->id == QPNP_ID_RGB_RED)
		led->rgb_cfg->enable = RGB_LED_ENABLE_RED;
	else if (led->id == QPNP_ID_RGB_GREEN)
		led->rgb_cfg->enable = RGB_LED_ENABLE_GREEN;
	else if (led->id == QPNP_ID_RGB_BLUE)
		led->rgb_cfg->enable = RGB_LED_ENABLE_BLUE;
	else
		return -EINVAL;

	rc = of_property_read_u32(node, "qcom,mode", &val);
	if (!rc)
		led->rgb_cfg->mode = (u8) val;
	else
		return rc;

	rc = of_property_read_u32(node, "qcom,pwm-channel", &val);
	if (!rc)
		led->rgb_cfg->pwm_channel = (u8) val;
	else
		return rc;

	rc = of_property_read_u32(node, "qcom,pwm-us", &val);
	if (!rc)
		led->rgb_cfg->pwm_period_us = val;
	else
		return rc;

	if (led->rgb_cfg->mode == RGB_MODE_LPG) {
		led->rgb_cfg->duty_cycles =
			devm_kzalloc(&led->spmi_dev->dev,
			sizeof(struct pwm_duty_cycles), GFP_KERNEL);
		if (!led->rgb_cfg->duty_cycles) {
			dev_err(&led->spmi_dev->dev,
				"Unable to allocate memory\n");
			return -ENOMEM;
		}

		rc = of_property_read_u32(node, "qcom,duty-ms", &val);
		if (!rc)
			led->rgb_cfg->duty_cycles->duty_ms = (u8) val;
		else
			return rc;

		prop = of_find_property(node, "qcom,duty-pcts",
			&led->rgb_cfg->duty_cycles->num_duty_pcts);
		if (!prop) {
			dev_err(&led->spmi_dev->dev, "Looking up property " \
				"node qcom,duty-pcts failed\n");
			return -ENODEV;
		} else if (!led->rgb_cfg->duty_cycles->num_duty_pcts) {
			dev_err(&led->spmi_dev->dev, "Invalid length of " \
				"duty pcts\n");
			return -EINVAL;
		}

		led->rgb_cfg->duty_cycles->duty_pcts =
			devm_kzalloc(&led->spmi_dev->dev,
			sizeof(int) * led->rgb_cfg->duty_cycles->num_duty_pcts,
			GFP_KERNEL);
		if (!led->rgb_cfg->duty_cycles->duty_pcts) {
			dev_err(&led->spmi_dev->dev,
				"Unable to allocate memory\n");
			return -ENOMEM;
		}

		temp_cfg = devm_kzalloc(&led->spmi_dev->dev,
				led->rgb_cfg->duty_cycles->num_duty_pcts *
				sizeof(u8), GFP_KERNEL);
		if (!temp_cfg) {
			dev_err(&led->spmi_dev->dev, "Failed to allocate " \
				"memory for duty pcts\n");
			return -ENOMEM;
		}

		memcpy(temp_cfg, prop->value,
			led->rgb_cfg->duty_cycles->num_duty_pcts);

		for (i = 0; i < led->rgb_cfg->duty_cycles->num_duty_pcts; i++)
			led->rgb_cfg->duty_cycles->duty_pcts[i] =
				(int) temp_cfg[i];

		rc = of_property_read_u32(node, "qcom,start-idx", &val);
		if (!rc) {
			led->rgb_cfg->lut_params.start_idx = (u8) val;
			led->rgb_cfg->duty_cycles->start_idx = (u8) val;
		} else
			return rc;

		led->rgb_cfg->lut_params.idx_len =
			led->rgb_cfg->duty_cycles->num_duty_pcts;
		led->rgb_cfg->lut_params.lut_pause_hi = 0;
		led->rgb_cfg->lut_params.lut_pause_lo = 0;
		led->rgb_cfg->lut_params.ramp_step_ms = 255;
		led->rgb_cfg->lut_params.flags = QPNP_LED_PWM_FLAGS;
	}

	return 0;
}

static int __devinit qpnp_leds_probe(struct spmi_device *spmi)
{
	struct qpnp_led_data *led, *led_array;
	struct resource *led_resource;
	struct device_node *node, *temp;
	int rc, i, num_leds = 0, parsed_leds = 0;
	const char *led_label;

	node = spmi->dev.of_node;
	if (node == NULL)
		return -ENODEV;

	temp = NULL;
	while ((temp = of_get_next_child(node, temp)))
		num_leds++;

	if (!num_leds)
		return -ECHILD;

	led_array = devm_kzalloc(&spmi->dev,
		(sizeof(struct qpnp_led_data) * num_leds), GFP_KERNEL);
	if (!led_array) {
		dev_err(&spmi->dev, "Unable to allocate memory\n");
		return -ENOMEM;
	}

	for_each_child_of_node(node, temp) {
		led = &led_array[parsed_leds];
		led->num_leds = num_leds;
		led->spmi_dev = spmi;

		led_resource = spmi_get_resource(spmi, NULL, IORESOURCE_MEM, 0);
		if (!led_resource) {
			dev_err(&spmi->dev, "Unable to get LED base address\n");
			rc = -ENXIO;
			goto fail_id_check;
		}
		led->base = led_resource->start;

		rc = of_property_read_string(temp, "label", &led_label);
		if (rc < 0) {
			dev_err(&led->spmi_dev->dev,
				"Failure reading label, rc = %d\n", rc);
			goto fail_id_check;
		}

		rc = of_property_read_string(temp, "linux,name",
			&led->cdev.name);
		if (rc < 0) {
			dev_err(&led->spmi_dev->dev,
				"Failure reading led name, rc = %d\n", rc);
			goto fail_id_check;
		}

		rc = of_property_read_u32(temp, "qcom,max-current",
			&led->max_current);
		if (rc < 0) {
			dev_err(&led->spmi_dev->dev,
				"Failure reading max_current, rc =  %d\n", rc);
			goto fail_id_check;
		}

		rc = of_property_read_u32(temp, "qcom,id", &led->id);
		if (rc < 0) {
			dev_err(&led->spmi_dev->dev,
				"Failure reading led id, rc =  %d\n", rc);
			goto fail_id_check;
		}

		rc = qpnp_get_common_configs(led, temp);
		if (rc) {
			dev_err(&led->spmi_dev->dev,
				"Failure reading common led configuration," \
				" rc = %d\n", rc);
			goto fail_id_check;
		}

		led->cdev.brightness_set    = qpnp_led_set;
		led->cdev.brightness_get    = qpnp_led_get;

		if (strncmp(led_label, "wled", sizeof("wled")) == 0) {
			rc = qpnp_get_config_wled(led, temp);
			if (rc < 0) {
				dev_err(&led->spmi_dev->dev,
					"Unable to read wled config data\n");
				goto fail_id_check;
			}
		} else if (strncmp(led_label, "flash", sizeof("flash"))
				== 0) {
			rc = qpnp_get_config_flash(led, temp);
			if (rc < 0) {
				dev_err(&led->spmi_dev->dev,
					"Unable to read flash config data\n");
				goto fail_id_check;
			}
		} else if (strncmp(led_label, "rgb", sizeof("rgb")) == 0) {
			rc = qpnp_get_config_rgb(led, temp);
			if (rc < 0) {
				dev_err(&led->spmi_dev->dev,
					"Unable to read rgb config data\n");
				goto fail_id_check;
			}
		} else {
			dev_err(&led->spmi_dev->dev, "No LED matching label\n");
			rc = -EINVAL;
			goto fail_id_check;
		}

		spin_lock_init(&led->lock);

		rc =  qpnp_led_initialize(led);
		if (rc < 0)
			goto fail_id_check;

		rc = qpnp_led_set_max_brightness(led);
		if (rc < 0)
			goto fail_id_check;

		rc = led_classdev_register(&spmi->dev, &led->cdev);
		if (rc) {
			dev_err(&spmi->dev, "unable to register led %d,rc=%d\n",
						 led->id, rc);
			goto fail_id_check;
		}
		/* configure default state */
		if (led->default_on) {
			led->cdev.brightness = led->cdev.max_brightness;
			if (led->turn_off_delay_ms > 0)
				qpnp_led_turn_off(led);
		} else
			led->cdev.brightness = LED_OFF;

		qpnp_led_set(&led->cdev, led->cdev.brightness);

		parsed_leds++;
	}
	dev_set_drvdata(&spmi->dev, led_array);
	return 0;

fail_id_check:
	for (i = 0; i < parsed_leds; i++)
		led_classdev_unregister(&led_array[i].cdev);
	return rc;
}

static int __devexit qpnp_leds_remove(struct spmi_device *spmi)
{
	struct qpnp_led_data *led_array  = dev_get_drvdata(&spmi->dev);
	int i, parsed_leds = led_array->num_leds;

	for (i = 0; i < parsed_leds; i++)
		led_classdev_unregister(&led_array[i].cdev);

	return 0;
}
static struct of_device_id spmi_match_table[] = {
	{	.compatible = "qcom,leds-qpnp",
	}
};

static struct spmi_driver qpnp_leds_driver = {
	.driver		= {
		.name	= "qcom,leds-qpnp",
		.of_match_table = spmi_match_table,
	},
	.probe		= qpnp_leds_probe,
	.remove		= __devexit_p(qpnp_leds_remove),
};

static int __init qpnp_led_init(void)
{
	return spmi_driver_register(&qpnp_leds_driver);
}
module_init(qpnp_led_init);

static void __exit qpnp_led_exit(void)
{
	spmi_driver_unregister(&qpnp_leds_driver);
}
module_exit(qpnp_led_exit);

MODULE_DESCRIPTION("QPNP LEDs driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("leds:leds-qpnp");