Blame - drivers/mfd/Kconfig - kernel/msm

blob: ff0fc74de07e66e29023147a1b4eb5c7f3c9230e [file] [log] [blame]

Russell King	a4e137a	2005-08-18 10:06:59 +0100	[diff] [blame]	1	#
				2	# Multifunction miscellaneous devices
				3	#
				4
Arnd Bergmann	8a0a8e8	2011-09-02 16:43:36 +0200	[diff] [blame]	5	if HAS_IOMEM
				6	menu "Multifunction device drivers"
Ben Dooks	b6d6454	2007-02-20 13:58:01 -0800	[diff] [blame]	7
Dmitry Baryshkov	aa613de	2008-06-27 10:37:19 +0100	[diff] [blame]	8	config MFD_CORE
				9	tristate
				10	default n
				11
Haojian Zhuang	2cc50be	2010-01-06 17:07:13 -0500	[diff] [blame]	12	config MFD_88PM860X
				13	bool "Support Marvell 88PM8606/88PM8607"
Geert Uytterhoeven	8d002bd	2009-12-15 21:49:57 +0100	[diff] [blame]	14	depends on I2C=y && GENERIC_HARDIRQS
Jett.Zhou	b46a36c	2011-11-11 15:38:27 +0800	[diff] [blame]	15	select REGMAP_I2C
Haojian Zhuang	2cc50be	2010-01-06 17:07:13 -0500	[diff] [blame]	16	select MFD_CORE
				17	help
				18	This supports for Marvell 88PM8606/88PM8607 Power Management IC.
				19	This includes the I2C driver and the core APIs _only_, you have to
				20	select individual components like voltage regulators, RTC and
				21	battery-charger under the corresponding menus.
				22
Ben Dooks	b6d6454	2007-02-20 13:58:01 -0800	[diff] [blame]	23	config MFD_SM501
				24	tristate "Support for Silicon Motion SM501"
				25	---help---
				26	This is the core driver for the Silicon Motion SM501 multimedia
				27	companion chip. This device is a multifunction device which may
Matt LaPlante	01dd2fb	2007-10-20 01:34:40 +0200	[diff] [blame]	28	provide numerous interfaces including USB host controller, USB gadget,
				29	asynchronous serial ports, audio functions, and a dual display video
Ben Dooks	b6d6454	2007-02-20 13:58:01 -0800	[diff] [blame]	30	interface. The device may be connected by PCI or local bus with
				31	varying functions enabled.
				32
Ben Dooks	f61be27	2008-07-25 01:45:59 -0700	[diff] [blame]	33	config MFD_SM501_GPIO
				34	bool "Export GPIO via GPIO layer"
Samuel Ortiz	2eedd60	2008-09-25 00:39:05 +0200	[diff] [blame]	35	depends on MFD_SM501 && GPIOLIB
Ben Dooks	f61be27	2008-07-25 01:45:59 -0700	[diff] [blame]	36	---help---
				37	This option uses the gpio library layer to export the 64 GPIO
				38	lines on the SM501. The platform data is used to supply the
				39	base number for the first GPIO line to register.
				40
Samuel Ortiz	fa9ff4b	2008-02-07 00:14:49 -0800	[diff] [blame]	41	config MFD_ASIC3
				42	bool "Support for Compaq ASIC3"
Samuel Ortiz	2eedd60	2008-09-25 00:39:05 +0200	[diff] [blame]	43	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabel	9461f65	2009-06-15 12:10:24 +0200	[diff] [blame]	44	select MFD_CORE
Samuel Ortiz	fa9ff4b	2008-02-07 00:14:49 -0800	[diff] [blame]	45	---help---
				46	This driver supports the ASIC3 multifunction chip found on many
				47	PDAs (mainly iPAQ and HTC based ones)
				48
Miguel Aguilar	ca26308	2010-03-11 09:32:21 -0600	[diff] [blame]	49	config MFD_DAVINCI_VOICECODEC
				50	tristate
				51	select MFD_CORE
				52
David Brownell	0931a4c	2008-12-22 12:05:27 +0100	[diff] [blame]	53	config MFD_DM355EVM_MSP
				54	bool "DaVinci DM355 EVM microcontroller"
Samuel Ortiz	1819ebc	2010-09-20 00:19:27 +0200	[diff] [blame]	55	depends on I2C=y && MACH_DAVINCI_DM355_EVM
David Brownell	0931a4c	2008-12-22 12:05:27 +0100	[diff] [blame]	56	help
				57	This driver supports the MSP430 microcontroller used on these
				58	boards. MSP430 firmware manages resets and power sequencing,
				59	inputs from buttons and the IR remote, LEDs, an RTC, and more.
				60
Cyril Chemparathy	03df0f6	2011-01-18 19:21:35 +0000	[diff] [blame]	61	config MFD_TI_SSP
				62	tristate "TI Sequencer Serial Port support"
				63	depends on ARCH_DAVINCI_TNETV107X
				64	select MFD_CORE
				65	---help---
				66	Say Y here if you want support for the Sequencer Serial Port
				67	in a Texas Instruments TNETV107X SoC.
				68
				69	To compile this driver as a module, choose M here: the
				70	module will be called ti-ssp.
				71
Philipp Zabel	a1635b8	2008-04-09 19:20:34 +0100	[diff] [blame]	72	config HTC_EGPIO
				73	bool "HTC EGPIO support"
Michael Buesch	7444a72	2008-07-25 01:46:11 -0700	[diff] [blame]	74	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabel	a1635b8	2008-04-09 19:20:34 +0100	[diff] [blame]	75	help
				76	This driver supports the CPLD egpio chip present on
				77	several HTC phones. It provides basic support for input
				78	pins, output pins, and irqs.
				79
Philipp Zabel	5dc3339	2008-04-12 13:25:41 +0100	[diff] [blame]	80	config HTC_PASIC3
				81	tristate "HTC PASIC3 LED/DS1WM chip support"
Philipp Zabel	0254a8f	2009-02-17 10:06:45 +0100	[diff] [blame]	82	select MFD_CORE
Philipp Zabel	5dc3339	2008-04-12 13:25:41 +0100	[diff] [blame]	83	help
				84	This core driver provides register access for the LED/DS1WM
				85	chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
				86	HTC Magician devices, respectively. Actual functionality is
				87	handled by the leds-pasic3 and ds1wm drivers.
				88
Cory Maccarrone	6048a3d	2010-01-19 11:22:45 +0100	[diff] [blame]	89	config HTC_I2CPLD
				90	bool "HTC I2C PLD chip support"
Randy Dunlap	bef3e20	2010-01-20 19:55:34 -0800	[diff] [blame]	91	depends on I2C=y && GPIOLIB
Cory Maccarrone	6048a3d	2010-01-19 11:22:45 +0100	[diff] [blame]	92	help
				93	If you say yes here you get support for the supposed CPLD
				94	found on omap850 HTC devices like the HTC Wizard and HTC Herald.
				95	This device provides input and output GPIOs through an I2C
				96	interface to one or more sub-chips.
				97
Marek Vašut	d9105c2	2008-08-03 21:34:08 +0100	[diff] [blame]	98	config UCB1400_CORE
				99	tristate "Philips UCB1400 Core driver"
Randy Dunlap	e483180	2008-10-15 13:29:07 +0200	[diff] [blame]	100	depends on AC97_BUS
Andrew Morton	5a49a54	2008-10-15 13:30:47 +0200	[diff] [blame]	101	depends on GPIOLIB
Marek Vašut	d9105c2	2008-08-03 21:34:08 +0100	[diff] [blame]	102	help
				103	This enables support for the Philips UCB1400 core functions.
				104	The UCB1400 is an AC97 audio codec.
				105
				106	To compile this driver as a module, choose M here: the
				107	module will be called ucb1400_core.
				108
Linus Walleij	798a8ee	2011-03-09 13:02:38 +0100	[diff] [blame]	109	config TPS6105X
				110	tristate "TPS61050/61052 Boost Converters"
				111	depends on I2C
Linus Walleij	2edd3b6	2011-03-09 12:02:55 +0000	[diff] [blame]	112	select REGULATOR
Guenter Roeck	fc498fa	2011-03-24 12:12:47 -0700	[diff] [blame]	113	select MFD_CORE
Linus Walleij	2edd3b6	2011-03-09 12:02:55 +0000	[diff] [blame]	114	select REGULATOR_FIXED_VOLTAGE
Linus Walleij	798a8ee	2011-03-09 13:02:38 +0100	[diff] [blame]	115	help
				116	This option enables a driver for the TP61050/TPS61052
				117	high-power "white LED driver". This boost converter is
				118	sometimes used for other things than white LEDs, and
				119	also contains a GPIO pin.
				120
David Brownell	87c1349	2008-12-22 12:16:27 +0100	[diff] [blame]	121	config TPS65010
				122	tristate "TPS6501x Power Management chips"
				123	depends on I2C && GPIOLIB
				124	default y if MACH_OMAP_H2 \|\| MACH_OMAP_H3 \|\| MACH_OMAP_OSK
				125	help
				126	If you say yes here you get support for the TPS6501x series of
				127	Power Management chips. These include voltage regulators,
				128	lithium ion/polymer battery charging, and other features that
				129	are often used in portable devices like cell phones and cameras.
				130
				131	This driver can also be built as a module. If so, the module
				132	will be called tps65010.
				133
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	134	config TPS65023
				135	tristate "TPS65023 Power Management chip"
				136	depends on I2C && ARCH_MSM_SCORPION && !MSM_SMP
				137	default y if I2C && ARCH_MSM_SCORPION && !MSM_SMP
				138	help
				139	Say yes here for Qualcomm QSD chips. The TI PMIC is used by the
				140	QSD8x50 series of chips for power management.
				141
				142	config PMIC8058
				143	tristate "PMIC8058 Power Management chip"
Anirudh Ghayal	f1f1e14	2011-10-10 17:47:45 +0530	[diff] [blame]	144	depends on MSM_SSBI
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	145	select MFD_CORE
Anirudh Ghayal	c201933	2011-11-12 06:29:10 +0530	[diff] [blame]	146	select MFD_PM8XXX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	147	help
				148	Say yes here for Qualcomm PM8058 chip.
				149
				150	config PMIC8901
				151	tristate "PMIC8901 Power Management chip"
Anirudh Ghayal	c8051a8	2011-11-17 09:28:24 +0530	[diff] [blame]	152	depends on MSM_SSBI
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	153	select MFD_CORE
Anirudh Ghayal	c8051a8	2011-11-17 09:28:24 +0530	[diff] [blame]	154	select MFD_PM8XXX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	155	help
				156	Say yes here for Qualcomm PM8901 chip.
				157
				158	config MARIMBA_TSADC
				159	tristate "Support for Marimba Touchscreen ADC"
				160	depends on MARIMBA_CORE && ARCH_MSM7X30
				161	default y if MARIMBA_CORE
				162	help
				163	Say yes here if you want to include support for TSADC in the
				164	Qualcomm Marimba chip.
				165
Todd Fischer	31dd6a2	2010-04-08 09:04:55 +0200	[diff] [blame]	166	config TPS6507X
				167	tristate "TPS6507x Power Management / Touch Screen chips"
				168	select MFD_CORE
				169	depends on I2C
				170	help
				171	If you say yes here you get support for the TPS6507x series of
				172	Power Management / Touch Screen chips. These include voltage
				173	regulators, lithium ion/polymer battery charging, touch screen
				174	and other features that are often used in portable devices.
				175	This driver can also be built as a module. If so, the module
				176	will be called tps6507x.
				177
AnilKumar Ch	d48f411	2012-01-11 16:11:41 +0530	[diff] [blame]	178	config MFD_TPS65217
				179	tristate "TPS65217 Power Management / White LED chips"
				180	depends on I2C
				181	select MFD_CORE
				182	select REGMAP_I2C
				183	help
				184	If you say yes here you get support for the TPS65217 series of
				185	Power Management / White LED chips.
				186	These include voltage regulators, lithium ion/polymer battery
				187	charger, wled and other features that are often used in portable
				188	devices.
				189
				190	This driver can also be built as a module. If so, the module
				191	will be called tps65217.
				192
Axel Lin	37df003	2011-04-15 20:04:45 +0800	[diff] [blame]	193	config MFD_TPS6586X
				194	bool "TPS6586x Power Management chips"
				195	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
				196	select MFD_CORE
				197	help
				198	If you say yes here you get support for the TPS6586X series of
				199	Power Management chips.
				200	This driver provides common support for accessing the device,
				201	additional drivers must be enabled in order to use the
				202	functionality of the device.
				203
				204	This driver can also be built as a module. If so, the module
				205	will be called tps6586x.
				206
Linus Walleij	54f323b	2011-07-04 17:34:16 +0200	[diff] [blame]	207	config MFD_TPS65910
				208	bool "TPS65910 Power Management chip"
				209	depends on I2C=y && GPIOLIB
				210	select MFD_CORE
				211	select GPIO_TPS65910
Laxman Dewangan	dc9913a	2012-02-21 18:21:34 +0530	[diff] [blame]	212	select REGMAP_I2C
Linus Walleij	54f323b	2011-07-04 17:34:16 +0200	[diff] [blame]	213	help
				214	if you say yes here you get support for the TPS65910 series of
				215	Power Management chips.
				216
Margarita Olaya	36e5287	2011-06-09 14:50:00 -0500	[diff] [blame]	217	config MFD_TPS65912
Mark Brown	5608801	2011-06-22 14:53:58 +0100	[diff] [blame]	218	bool
Margarita Olaya	36e5287	2011-06-09 14:50:00 -0500	[diff] [blame]	219	depends on GPIOLIB
				220
				221	config MFD_TPS65912_I2C
Axel Lin	231dd9c	2012-02-15 16:05:24 +0800	[diff] [blame]	222	bool "TPS65912 Power Management chip with I2C"
Margarita Olaya	36e5287	2011-06-09 14:50:00 -0500	[diff] [blame]	223	select MFD_CORE
				224	select MFD_TPS65912
				225	depends on I2C=y && GPIOLIB
				226	help
				227	If you say yes here you get support for the TPS65912 series of
				228	PM chips with I2C interface.
				229
				230	config MFD_TPS65912_SPI
				231	bool "TPS65912 Power Management chip with SPI"
				232	select MFD_CORE
				233	select MFD_TPS65912
				234	depends on SPI_MASTER && GPIOLIB
				235	help
				236	If you say yes here you get support for the TPS65912 series of
				237	PM chips with SPI interface.
				238
David Brownell	88e75cc	2008-12-22 12:18:02 +0100	[diff] [blame]	239	config MENELAUS
				240	bool "Texas Instruments TWL92330/Menelaus PM chip"
Tony Lindgren	088ef95	2010-02-12 12:26:47 -0800	[diff] [blame]	241	depends on I2C=y && ARCH_OMAP2
David Brownell	88e75cc	2008-12-22 12:18:02 +0100	[diff] [blame]	242	help
				243	If you say yes here you get support for the Texas Instruments
				244	TWL92330/Menelaus Power Management chip. This include voltage
Matt LaPlante	692105b	2009-01-26 11:12:25 +0100	[diff] [blame]	245	regulators, Dual slot memory card transceivers, real-time clock
David Brownell	88e75cc	2008-12-22 12:18:02 +0100	[diff] [blame]	246	and other features that are often used in portable devices like
				247	cell phones and PDAs.
				248
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	249	config MARIMBA_CORE
				250	tristate "Marimba Core"
Ankit Verma	a7d9059	2012-09-12 21:10:04 +0530	[diff] [blame]	251	depends on I2C && (ARCH_MSM7X30 \|\| ARCH_MSM8X60 \|\| ARCH_MSM7X27A \|\| ARCH_MSM8960)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	252	default n
				253	help
				254	Enables the Marimba Core driver. The core driver provides
				255	read/write capability to registers which are part of the
				256	marimba core.
				257	This driver dynamically detects the SoC and works for both
				258	Marimba and Bahama Chip.
				259
				260	config MARIMBA_CODEC
				261	tristate "Marimba Codec"
				262	depends on MARIMBA_CORE
				263	default n
				264	help
				265	This driver programs Marimba Wideband Codec for input/output of
				266	audio signal.
				267
				268	config TIMPANI_CODEC
				269	tristate "Timpani Codec"
				270	depends on MARIMBA_CORE
				271	default n
				272	help
				273	This driver programs Timpani Wideband Codec for input/output of
				274	audio signal.
				275
David Brownell	a603a7f	2008-10-15 12:15:39 +0200	[diff] [blame]	276	config TWL4030_CORE
Balaji T K	e8deb28	2009-12-14 00:25:31 +0100	[diff] [blame]	277	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
Russell King	6252547	2012-02-07 09:47:21 +0000	[diff] [blame]	278	depends on I2C=y && GENERIC_HARDIRQS
Grant Likely	280ad7f	2012-02-24 14:58:54 -0700	[diff] [blame]	279	select IRQ_DOMAIN
David Brownell	a603a7f	2008-10-15 12:15:39 +0200	[diff] [blame]	280	help
Balaji T K	e8deb28	2009-12-14 00:25:31 +0100	[diff] [blame]	281	Say yes here if you have TWL4030 / TWL6030 family chip on your board.
David Brownell	a603a7f	2008-10-15 12:15:39 +0200	[diff] [blame]	282	This core driver provides register access and IRQ handling
				283	facilities, and registers devices for the various functions
				284	so that function-specific drivers can bind to them.
				285
				286	These multi-function chips are found on many OMAP2 and OMAP3
				287	boards, providing power management, RTC, GPIO, keypad, a
				288	high speed USB OTG transceiver, an audio codec (on most
				289	versions) and many other features.
				290
Keerthy	f99c1d4	2011-03-01 19:12:26 +0530	[diff] [blame]	291	config TWL4030_MADC
				292	tristate "Texas Instruments TWL4030 MADC"
				293	depends on TWL4030_CORE
				294	help
				295	This driver provides support for triton TWL4030-MADC. The
				296	driver supports both RT and SW conversion methods.
				297
				298	This driver can be built as a module. If so it will be
				299	named twl4030-madc
				300
Amit Kucheria	ebf0bd3	2009-08-31 18:32:18 +0200	[diff] [blame]	301	config TWL4030_POWER
				302	bool "Support power resources on TWL4030 family chips"
				303	depends on TWL4030_CORE && ARM
				304	help
				305	Say yes here if you want to use the power resources on the
				306	TWL4030 family chips. Most of these resources are regulators,
				307	which have a separate driver; some are control signals, such
				308	as clock request handshaking.
				309
				310	This driver uses board-specific data to initialize the resources
Lucas De Marchi	25985ed	2011-03-30 22:57:33 -0300	[diff] [blame]	311	and load scripts controlling which resources are switched off/on
Amit Kucheria	ebf0bd3	2009-08-31 18:32:18 +0200	[diff] [blame]	312	or reset when a sleep, wakeup or warm reset event occurs.
				313
Peter Ujfalusi	57fe725	2011-05-31 12:02:49 +0300	[diff] [blame]	314	config MFD_TWL4030_AUDIO
Peter Ujfalusi	0b83dde	2009-10-22 13:26:45 +0300	[diff] [blame]	315	bool
				316	depends on TWL4030_CORE
				317	select MFD_CORE
				318	default n
				319
Hemanth V	31fc03d	2010-07-14 12:04:56 +0200	[diff] [blame]	320	config TWL6030_PWM
				321	tristate "TWL6030 PWM (Pulse Width Modulator) Support"
				322	depends on TWL4030_CORE
				323	select HAVE_PWM
				324	default n
				325	help
				326	Say yes here if you want support for TWL6030 PWM.
				327	This is used to control charging LED brightness.
				328
Misael Lopez Cruz	f19b282	2011-04-27 02:14:07 -0500	[diff] [blame]	329	config TWL6040_CORE
Peter Ujfalusi	8eaeb93	2012-04-03 11:56:51 +0300	[diff] [blame]	330	bool "Support for TWL6040 audio codec"
				331	depends on I2C=y && GENERIC_HARDIRQS
Misael Lopez Cruz	f19b282	2011-04-27 02:14:07 -0500	[diff] [blame]	332	select MFD_CORE
Peter Ujfalusi	8eaeb93	2012-04-03 11:56:51 +0300	[diff] [blame]	333	select REGMAP_I2C
Misael Lopez Cruz	f19b282	2011-04-27 02:14:07 -0500	[diff] [blame]	334	default n
Peter Ujfalusi	8eaeb93	2012-04-03 11:56:51 +0300	[diff] [blame]	335	help
				336	Say yes here if you want support for Texas Instruments TWL6040 audio
				337	codec.
				338	This driver provides common support for accessing the device,
				339	additional drivers must be enabled in order to use the
				340	functionality of the device (audio, vibra).
Misael Lopez Cruz	f19b282	2011-04-27 02:14:07 -0500	[diff] [blame]	341
Rabin Vincent	27e3499	2010-07-02 16:52:08 +0530	[diff] [blame]	342	config MFD_STMPE
				343	bool "Support STMicroelectronics STMPE"
Viresh Kumar	e789995	2011-11-17 11:02:21 +0530	[diff] [blame]	344	depends on (I2C=y \|\| SPI_MASTER=y) && GENERIC_HARDIRQS
Rabin Vincent	27e3499	2010-07-02 16:52:08 +0530	[diff] [blame]	345	select MFD_CORE
				346	help
				347	Support for the STMPE family of I/O Expanders from
				348	STMicroelectronics.
				349
				350	Currently supported devices are:
				351
				352	STMPE811: GPIO, Touchscreen
				353	STMPE1601: GPIO, Keypad
				354	STMPE2401: GPIO, Keypad
				355	STMPE2403: GPIO, Keypad
				356
				357	This driver provides common support for accessing the device,
				358	additional drivers must be enabled in order to use the functionality
				359	of the device. Currently available sub drivers are:
				360
				361	GPIO: stmpe-gpio
				362	Keypad: stmpe-keypad
				363	Touchscreen: stmpe-ts
				364
Viresh Kumar	1a6e4b7	2011-11-17 11:02:20 +0530	[diff] [blame]	365	menu "STMPE Interface Drivers"
				366	depends on MFD_STMPE
				367
				368	config STMPE_I2C
				369	bool "STMPE I2C Inteface"
Samuel Ortiz	eedea80	2011-12-20 18:28:19 +0100	[diff] [blame]	370	depends on I2C=y
Viresh Kumar	1a6e4b7	2011-11-17 11:02:20 +0530	[diff] [blame]	371	default y
				372	help
				373	This is used to enable I2C interface of STMPE
Viresh Kumar	e789995	2011-11-17 11:02:21 +0530	[diff] [blame]	374
				375	config STMPE_SPI
				376	bool "STMPE SPI Inteface"
				377	depends on SPI_MASTER
				378	help
				379	This is used to enable SPI interface of STMPE
Viresh Kumar	1a6e4b7	2011-11-17 11:02:20 +0530	[diff] [blame]	380	endmenu
				381
Sundar Iyer	f4e8afd	2010-12-13 09:33:13 +0530	[diff] [blame]	382	config MFD_TC3589X
				383	bool "Support Toshiba TC35892 and variants"
Rabin Vincent	b4ecd32	2010-05-10 23:39:47 +0200	[diff] [blame]	384	depends on I2C=y && GENERIC_HARDIRQS
				385	select MFD_CORE
				386	help
Sundar Iyer	f4e8afd	2010-12-13 09:33:13 +0530	[diff] [blame]	387	Support for the Toshiba TC35892 and variants I/O Expander.
Rabin Vincent	b4ecd32	2010-05-10 23:39:47 +0200	[diff] [blame]	388
				389	This driver provides common support for accessing the device,
				390	additional drivers must be enabled in order to use the
				391	functionality of the device.
				392
Samuel Ortiz	1c2c30a	2008-08-05 19:27:58 +0200	[diff] [blame]	393	config MFD_TMIO
				394	bool
				395	default n
				396
Ian Molton	1f19201	2008-07-15 15:09:43 +0100	[diff] [blame]	397	config MFD_T7L66XB
				398	bool "Support Toshiba T7L66XB"
Al Viro	9ca6823	2008-11-01 18:19:59 +0000	[diff] [blame]	399	depends on ARM && HAVE_CLK
Ian Molton	1f19201	2008-07-15 15:09:43 +0100	[diff] [blame]	400	select MFD_CORE
Samuel Ortiz	1c2c30a	2008-08-05 19:27:58 +0200	[diff] [blame]	401	select MFD_TMIO
Ian Molton	1f19201	2008-07-15 15:09:43 +0100	[diff] [blame]	402	help
				403	Support for Toshiba Mobile IO Controller T7L66XB
				404
Ian Molton	cbdfb42	2008-07-15 15:12:52 +0100	[diff] [blame]	405	config MFD_TC6387XB
				406	bool "Support Toshiba TC6387XB"
Al Viro	9ca6823	2008-11-01 18:19:59 +0000	[diff] [blame]	407	depends on ARM && HAVE_CLK
Ian Molton	cbdfb42	2008-07-15 15:12:52 +0100	[diff] [blame]	408	select MFD_CORE
Samuel Ortiz	1c2c30a	2008-08-05 19:27:58 +0200	[diff] [blame]	409	select MFD_TMIO
Ian Molton	cbdfb42	2008-07-15 15:12:52 +0100	[diff] [blame]	410	help
				411	Support for Toshiba Mobile IO Controller TC6387XB
				412
Dmitry Baryshkov	d631594	2008-06-22 12:01:58 +0100	[diff] [blame]	413	config MFD_TC6393XB
				414	bool "Support Toshiba TC6393XB"
Christoph Fritz	e959da1	2011-11-29 19:38:38 +0100	[diff] [blame]	415	depends on GPIOLIB && ARM && HAVE_CLK
Dmitry Baryshkov	f024ff1	2008-06-27 10:37:57 +0100	[diff] [blame]	416	select MFD_CORE
Samuel Ortiz	1c2c30a	2008-08-05 19:27:58 +0200	[diff] [blame]	417	select MFD_TMIO
Dmitry Baryshkov	d631594	2008-06-22 12:01:58 +0100	[diff] [blame]	418	help
				419	Support for Toshiba Mobile IO Controller TC6393XB
				420
Samuel Ortiz	8e2eaab	2008-10-24 17:10:05 +0200	[diff] [blame]	421	config PMIC_DA903X
				422	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
				423	depends on I2C=y
				424	help
				425	Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
				426	ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
				427	usually found on PXA processors-based platforms. This includes
				428	the I2C driver and the core APIs _only_, you have to select
				429	individual components like LCD backlight, voltage regulators,
				430	LEDs and battery-charger under the corresponding menus.
				431
Ashish Jangam	84c99db	2011-12-12 20:06:56 +0530	[diff] [blame]	432	config PMIC_DA9052
				433	bool
				434	select MFD_CORE
				435
Ashish Jangam	cfe0447	2011-12-12 20:37:41 +0530	[diff] [blame]	436	config MFD_DA9052_SPI
				437	bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
				438	select REGMAP_SPI
				439	select REGMAP_IRQ
				440	select PMIC_DA9052
				441	depends on SPI_MASTER=y
				442	help
				443	Support for the Dialog Semiconductor DA9052 PMIC
				444	when controlled using SPI. This driver provides common support
				445	for accessing the device, additional drivers must be enabled in
				446	order to use the functionality of the device.
				447
Ashish Jangam	84c99db	2011-12-12 20:06:56 +0530	[diff] [blame]	448	config MFD_DA9052_I2C
				449	bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
				450	select REGMAP_I2C
				451	select REGMAP_IRQ
				452	select PMIC_DA9052
				453	depends on I2C=y
				454	help
				455	Support for the Dialog Semiconductor DA9052 PMIC
				456	when controlled using I2C. This driver provides common support
				457	for accessing the device, additional drivers must be enabled in
				458	order to use the functionality of the device.
				459
Michael Hennerich	a5736e0	2009-10-12 17:22:38 +0200	[diff] [blame]	460	config PMIC_ADP5520
				461	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
				462	depends on I2C=y
				463	help
				464	Say yes here to add support for Analog Devices AD5520 and ADP5501,
				465	Multifunction Power Management IC. This includes
				466	the I2C driver and the core APIs _only_, you have to select
				467	individual components like LCD backlight, LEDs, GPIOs and Kepad
				468	under the corresponding menus.
				469
Haojian Zhuang	d50f8f3	2010-01-08 12:29:23 +0100	[diff] [blame]	470	config MFD_MAX8925
Haojian Zhuang	1f1cf8f	2010-02-05 16:07:54 +0100	[diff] [blame]	471	bool "Maxim Semiconductor MAX8925 PMIC Support"
Geert Uytterhoeven	8d002bd	2009-12-15 21:49:57 +0100	[diff] [blame]	472	depends on I2C=y && GENERIC_HARDIRQS
Haojian Zhuang	1ad9989	2010-01-08 12:43:29 -0500	[diff] [blame]	473	select MFD_CORE
Haojian Zhuang	d50f8f3	2010-01-08 12:29:23 +0100	[diff] [blame]	474	help
				475	Say yes here to support for Maxim Semiconductor MAX8925. This is
				476	a Power Management IC. This driver provies common support for
				477	accessing the device, additional drivers must be enabled in order
				478	to use the functionality of the device.
				479
MyungJoo Ham	527e7e9	2011-03-04 15:50:26 +0900	[diff] [blame]	480	config MFD_MAX8997
				481	bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
				482	depends on I2C=y && GENERIC_HARDIRQS
				483	select MFD_CORE
				484	help
Axel Lin	5a924d1	2012-03-01 09:31:25 +0800	[diff] [blame]	485	Say yes here to support for Maxim Semiconductor MAX8997/8966.
MyungJoo Ham	527e7e9	2011-03-04 15:50:26 +0900	[diff] [blame]	486	This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
				487	MUIC controls on chip.
Randy Dunlap	d7e8c01	2011-03-14 11:28:37 +0100	[diff] [blame]	488	This driver provides common support for accessing the device;
MyungJoo Ham	527e7e9	2011-03-04 15:50:26 +0900	[diff] [blame]	489	additional drivers must be enabled in order to use the functionality
				490	of the device.
				491
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	492	config MFD_MAX8998
Kyungmin Park	f8539dd	2010-08-23 13:46:49 +0900	[diff] [blame]	493	bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
Joonyoung Shim	2c7e6f5	2010-09-10 18:36:39 +0200	[diff] [blame]	494	depends on I2C=y && GENERIC_HARDIRQS
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	495	select MFD_CORE
				496	help
Kyungmin Park	f8539dd	2010-08-23 13:46:49 +0900	[diff] [blame]	497	Say yes here to support for Maxim Semiconductor MAX8998 and
				498	National Semiconductor LP3974. This is a Power Management IC.
				499	This driver provies common support for accessing the device,
				500	additional drivers must be enabled in order to use the functionality
				501	of the device.
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	502
Sangbeom Kim	c3d4d69	2012-01-09 00:09:09 +0100	[diff] [blame]	503	config MFD_S5M_CORE
				504	bool "SAMSUNG S5M Series Support"
				505	depends on I2C=y && GENERIC_HARDIRQS
				506	select MFD_CORE
				507	select REGMAP_I2C
				508	help
				509	Support for the Samsung Electronics S5M MFD series.
				510	This driver provies common support for accessing the device,
				511	additional drivers must be enabled in order to use the functionality
				512	of the device
				513
Mark Brown	1d9f9f0	2008-09-10 18:58:42 +0100	[diff] [blame]	514	config MFD_WM8400
				515	tristate "Support Wolfson Microelectronics WM8400"
Mark Brown	b8380c1	2008-12-18 10:54:22 +0100	[diff] [blame]	516	select MFD_CORE
Mark Brown	9c36645	2008-10-24 17:16:11 +0200	[diff] [blame]	517	depends on I2C
Mark Brown	2b247d0	2011-08-23 18:56:19 +0100	[diff] [blame]	518	select REGMAP_I2C
Mark Brown	1d9f9f0	2008-09-10 18:58:42 +0100	[diff] [blame]	519	help
				520	Support for the Wolfson Microelecronics WM8400 PMIC and audio
Mark Brown	9e5aca5	2009-05-29 11:34:18 +0100	[diff] [blame]	521	CODEC. This driver provides common support for accessing
Mark Brown	1d9f9f0	2008-09-10 18:58:42 +0100	[diff] [blame]	522	the device, additional drivers must be enabled in order to use
				523	the functionality of the device.
				524
Mark Brown	b11062b	2009-07-27 14:45:58 +0100	[diff] [blame]	525	config MFD_WM831X
Mark Brown	e5b4868	2010-10-19 23:57:56 +0200	[diff] [blame]	526	bool
				527	depends on GENERIC_HARDIRQS
				528
				529	config MFD_WM831X_I2C
				530	bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
Mark Brown	b11062b	2009-07-27 14:45:58 +0100	[diff] [blame]	531	select MFD_CORE
Mark Brown	e5b4868	2010-10-19 23:57:56 +0200	[diff] [blame]	532	select MFD_WM831X
Mark Brown	1df5981	2011-06-10 19:28:10 +0100	[diff] [blame]	533	select REGMAP_I2C
Geert Uytterhoeven	8d002bd	2009-12-15 21:49:57 +0100	[diff] [blame]	534	depends on I2C=y && GENERIC_HARDIRQS
Mark Brown	b11062b	2009-07-27 14:45:58 +0100	[diff] [blame]	535	help
Mark Brown	e5b4868	2010-10-19 23:57:56 +0200	[diff] [blame]	536	Support for the Wolfson Microelecronics WM831x and WM832x PMICs
				537	when controlled using I2C. This driver provides common support
				538	for accessing the device, additional drivers must be enabled in
				539	order to use the functionality of the device.
Mark Brown	b11062b	2009-07-27 14:45:58 +0100	[diff] [blame]	540
Mark Brown	2aa13b9	2010-10-20 00:00:11 +0200	[diff] [blame]	541	config MFD_WM831X_SPI
				542	bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
				543	select MFD_CORE
				544	select MFD_WM831X
Mark Brown	1df5981	2011-06-10 19:28:10 +0100	[diff] [blame]	545	select REGMAP_SPI
Mark Brown	2aa13b9	2010-10-20 00:00:11 +0200	[diff] [blame]	546	depends on SPI_MASTER && GENERIC_HARDIRQS
				547	help
				548	Support for the Wolfson Microelecronics WM831x and WM832x PMICs
				549	when controlled using SPI. This driver provides common support
				550	for accessing the device, additional drivers must be enabled in
				551	order to use the functionality of the device.
				552
Mark Brown	89b4012	2008-10-10 15:58:10 +0100	[diff] [blame]	553	config MFD_WM8350
Mark Brown	ecf926b	2010-01-05 20:40:47 +0000	[diff] [blame]	554	bool
Geert Uytterhoeven	8d002bd	2009-12-15 21:49:57 +0100	[diff] [blame]	555	depends on GENERIC_HARDIRQS
Mark Brown	89b4012	2008-10-10 15:58:10 +0100	[diff] [blame]	556
				557	config MFD_WM8350_CONFIG_MODE_0
				558	bool
				559	depends on MFD_WM8350
				560
				561	config MFD_WM8350_CONFIG_MODE_1
				562	bool
				563	depends on MFD_WM8350
				564
				565	config MFD_WM8350_CONFIG_MODE_2
				566	bool
				567	depends on MFD_WM8350
				568
				569	config MFD_WM8350_CONFIG_MODE_3
				570	bool
				571	depends on MFD_WM8350
				572
Mark Brown	ca23f8c	2008-12-18 23:12:28 +0100	[diff] [blame]	573	config MFD_WM8351_CONFIG_MODE_0
				574	bool
				575	depends on MFD_WM8350
				576
				577	config MFD_WM8351_CONFIG_MODE_1
				578	bool
				579	depends on MFD_WM8350
				580
				581	config MFD_WM8351_CONFIG_MODE_2
				582	bool
				583	depends on MFD_WM8350
				584
				585	config MFD_WM8351_CONFIG_MODE_3
				586	bool
				587	depends on MFD_WM8350
				588
Mark Brown	9692063	2008-12-18 23:09:50 +0100	[diff] [blame]	589	config MFD_WM8352_CONFIG_MODE_0
				590	bool
				591	depends on MFD_WM8350
				592
				593	config MFD_WM8352_CONFIG_MODE_1
				594	bool
				595	depends on MFD_WM8350
				596
				597	config MFD_WM8352_CONFIG_MODE_2
				598	bool
				599	depends on MFD_WM8350
				600
				601	config MFD_WM8352_CONFIG_MODE_3
				602	bool
				603	depends on MFD_WM8350
				604
Mark Brown	c661a0b	2008-10-10 15:58:11 +0100	[diff] [blame]	605	config MFD_WM8350_I2C
Mark Brown	ecf926b	2010-01-05 20:40:47 +0000	[diff] [blame]	606	bool "Support Wolfson Microelectronics WM8350 with I2C"
Mark Brown	c661a0b	2008-10-10 15:58:11 +0100	[diff] [blame]	607	select MFD_WM8350
Geert Uytterhoeven	8d002bd	2009-12-15 21:49:57 +0100	[diff] [blame]	608	depends on I2C=y && GENERIC_HARDIRQS
Mark Brown	c661a0b	2008-10-10 15:58:11 +0100	[diff] [blame]	609	help
				610	The WM8350 is an integrated audio and power management
				611	subsystem with watchdog and RTC functionality for embedded
				612	systems. This option enables core support for the WM8350 with
				613	I2C as the control interface. Additional options must be
				614	selected to enable support for the functionality of the chip.
				615
Mark Brown	9e50108	2010-01-29 18:20:29 +0000	[diff] [blame]	616	config MFD_WM8994
Mark Brown	c9fbf7e	2010-03-26 16:49:15 +0000	[diff] [blame]	617	bool "Support Wolfson Microelectronics WM8994"
Mark Brown	9e50108	2010-01-29 18:20:29 +0000	[diff] [blame]	618	select MFD_CORE
Mark Brown	d6c645f	2011-06-17 13:02:27 +0100	[diff] [blame]	619	select REGMAP_I2C
Mark Brown	8ab3069	2011-10-25 10:19:04 +0200	[diff] [blame]	620	select REGMAP_IRQ
Mark Brown	c9fbf7e	2010-03-26 16:49:15 +0000	[diff] [blame]	621	depends on I2C=y && GENERIC_HARDIRQS
Mark Brown	9e50108	2010-01-29 18:20:29 +0000	[diff] [blame]	622	help
				623	The WM8994 is a highly integrated hi-fi CODEC designed for
				624	smartphone applicatiosn. As well as audio functionality it
				625	has on board GPIO and regulator functionality which is
				626	supported via the relevant subsystems. This driver provides
				627	core support for the WM8994, in order to use the actual
				628	functionaltiy of the device other drivers must be enabled.
				629
Balaji Rao	f52046b	2009-01-09 01:49:01 +0100	[diff] [blame]	630	config MFD_PCF50633
				631	tristate "Support for NXP PCF50633"
				632	depends on I2C
Mark Brown	6e3ad11	2011-08-08 17:04:40 +0900	[diff] [blame]	633	select REGMAP_I2C
Balaji Rao	f52046b	2009-01-09 01:49:01 +0100	[diff] [blame]	634	help
				635	Say yes here if you have NXP PCF50633 chip on your board.
				636	This core driver provides register access and IRQ handling
				637	facilities, and registers devices for the various functions
				638	so that function-specific drivers can bind to them.
				639
Axel Lin	1305134	2011-04-15 20:06:37 +0800	[diff] [blame]	640	config PCF50633_ADC
				641	tristate "Support for NXP PCF50633 ADC"
				642	depends on MFD_PCF50633
				643	help
				644	Say yes here if you want to include support for ADC in the
				645	NXP PCF50633 chip.
				646
				647	config PCF50633_GPIO
				648	tristate "Support for NXP PCF50633 GPIO"
				649	depends on MFD_PCF50633
				650	help
				651	Say yes here if you want to include support GPIO for pins on
				652	the PCF50633 chip.
				653
Sascha Hauer	8238add	2009-08-19 01:40:28 +0200	[diff] [blame]	654	config MFD_MC13783
Uwe Kleine-König	8e00593	2010-09-28 16:37:20 +0200	[diff] [blame]	655	tristate
				656
				657	config MFD_MC13XXX
				658	tristate "Support Freescale MC13783 and MC13892"
Sascha Hauer	8238add	2009-08-19 01:40:28 +0200	[diff] [blame]	659	depends on SPI_MASTER
				660	select MFD_CORE
Uwe Kleine-König	8e00593	2010-09-28 16:37:20 +0200	[diff] [blame]	661	select MFD_MC13783
Sascha Hauer	8238add	2009-08-19 01:40:28 +0200	[diff] [blame]	662	help
Uwe Kleine-König	8e00593	2010-09-28 16:37:20 +0200	[diff] [blame]	663	Support for the Freescale (Atlas) PMIC and audio CODECs
				664	MC13783 and MC13892.
Sascha Hauer	8238add	2009-08-19 01:40:28 +0200	[diff] [blame]	665	This driver provides common support for accessing the device,
				666	additional drivers must be enabled in order to use the
				667	functionality of the device.
				668
Mattias Wallin	fa66125	2010-05-01 18:26:20 +0200	[diff] [blame]	669	config ABX500_CORE
				670	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
Mattias Wallin	47c1697	2010-09-10 17:47:56 +0200	[diff] [blame]	671	default y if ARCH_U300 \|\| ARCH_U8500
Mattias Wallin	fa66125	2010-05-01 18:26:20 +0200	[diff] [blame]	672	help
				673	Say yes here if you have the ABX500 Mixed Signal IC family
				674	chips. This core driver expose register access functions.
				675	Functionality specific drivers using these functions can
				676	remain unchanged when IC changes. Binding of the functions to
				677	actual register access is done by the IC core driver.
				678
Linus Walleij	14fa569	2009-05-21 23:17:06 +0200	[diff] [blame]	679	config AB3100_CORE
Linus Walleij	2071db4	2010-01-19 11:41:52 +0100	[diff] [blame]	680	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
Mattias Wallin	fa66125	2010-05-01 18:26:20 +0200	[diff] [blame]	681	depends on I2C=y && ABX500_CORE
Linus Walleij	8c96aef	2010-08-20 10:27:12 +0200	[diff] [blame]	682	select MFD_CORE
Linus Walleij	14fa569	2009-05-21 23:17:06 +0200	[diff] [blame]	683	default y if ARCH_U300
				684	help
				685	Select this to enable the AB3100 Mixed Signal IC core
				686	functionality. This connects to a AB3100 on the I2C bus
				687	and expose a number of symbols needed for dependent devices
				688	to read and write registers and subscribe to events from
				689	this multi-functional IC. This is needed to use other features
				690	of the AB3100 such as battery-backed RTC, charging control,
				691	LEDs, vibrator, system power and temperature, power management
				692	and ALSA sound.
				693
Linus Walleij	12992dd	2009-08-18 22:52:26 +0200	[diff] [blame]	694	config AB3100_OTP
				695	tristate "ST-Ericsson AB3100 OTP functions"
				696	depends on AB3100_CORE
				697	default y if AB3100_CORE
				698	help
				699	Select this to enable the AB3100 Mixed Signal IC OTP (one-time
				700	programmable memory) support. This exposes a sysfs file to read
				701	out OTP values.
				702
Daniel Ribeiro	13a09f9	2009-05-28 15:43:37 -0300	[diff] [blame]	703	config EZX_PCAP
				704	bool "PCAP Support"
				705	depends on GENERIC_HARDIRQS && SPI_MASTER
				706	help
				707	This enables the PCAP ASIC present on EZX Phones. This is
				708	needed for MMC, TouchScreen, Sound, USB, etc..
				709
Mattias Wallin	3d5e2ca	2011-09-22 08:22:18 +0200	[diff] [blame]	710	config AB5500_CORE
				711	bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
				712	depends on ABX500_CORE && MFD_DB5500_PRCMU
				713	select MFD_CORE
				714	help
				715	Select this option to enable access to AB5500 power management
				716	chip. This connects to the db5500 chip via the I2C bus via PRCMU.
				717	This chip embeds various other multimedia funtionalities as well.
				718
Linus Walleij	94be70d	2011-09-22 08:22:33 +0200	[diff] [blame]	719	config AB5500_DEBUG
				720	bool "Enable debug info via debugfs"
				721	depends on AB5500_CORE && DEBUG_FS
				722	default y if DEBUG_FS
				723	help
				724	Select this option if you want debug information from the AB5500
				725	using the debug filesystem, debugfs.
				726
Rabin Vincent	6257926	2010-05-19 11:39:02 +0200	[diff] [blame]	727	config AB8500_CORE
				728	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
Sundar Iyer	6680d94	2010-12-24 11:52:08 +0100	[diff] [blame]	729	depends on GENERIC_HARDIRQS && ABX500_CORE
Rabin Vincent	6257926	2010-05-19 11:39:02 +0200	[diff] [blame]	730	select MFD_CORE
Srinidhi Kasagar	0c41839	2009-10-12 17:11:52 +0200	[diff] [blame]	731	help
Rabin Vincent	6257926	2010-05-19 11:39:02 +0200	[diff] [blame]	732	Select this option to enable access to AB8500 power management
Sundar Iyer	6680d94	2010-12-24 11:52:08 +0100	[diff] [blame]	733	chip. This connects to U8500 either on the SSP/SPI bus (deprecated
				734	since hardware version v1.0) or the I2C bus via PRCMU. It also adds
				735	the irq_chip parts for handling the Mixed Signal chip events.
Srinidhi Kasagar	0c41839	2009-10-12 17:11:52 +0200	[diff] [blame]	736	This chip embeds various other multimedia funtionalities as well.
				737
Mattias Wallin	39368ed	2010-09-15 13:12:03 +0200	[diff] [blame]	738	config AB8500_I2C_CORE
				739	bool "AB8500 register access via PRCMU I2C"
Linus Walleij	650c2a2	2011-05-15 22:53:56 +0200	[diff] [blame]	740	depends on AB8500_CORE && MFD_DB8500_PRCMU
Mattias Wallin	39368ed	2010-09-15 13:12:03 +0200	[diff] [blame]	741	default y
				742	help
				743	This enables register access to the AB8500 chip via PRCMU I2C.
				744	The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
				745	the I2C bus is connected to the Power Reset
				746	and Mangagement Unit, PRCMU.
				747
Mattias Wallin	5814fc3	2010-09-13 16:05:04 +0200	[diff] [blame]	748	config AB8500_DEBUG
				749	bool "Enable debug info via debugfs"
				750	depends on AB8500_CORE && DEBUG_FS
				751	default y if DEBUG_FS
				752	help
				753	Select this option if you want debug information using the debug
				754	filesystem, debugfs.
				755
Arun Murthy	dae2db3	2011-02-22 10:11:13 +0100	[diff] [blame]	756	config AB8500_GPADC
				757	bool "AB8500 GPADC driver"
				758	depends on AB8500_CORE && REGULATOR_AB8500
				759	default y
				760	help
				761	AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
				762
Linus Walleij	650c2a2	2011-05-15 22:53:56 +0200	[diff] [blame]	763	config MFD_DB8500_PRCMU
				764	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
				765	depends on UX500_SOC_DB8500
				766	select MFD_CORE
				767	help
				768	Select this option to enable support for the DB8500 Power Reset
				769	and Control Management Unit. This is basically an autonomous
				770	system controller running an XP70 microprocessor, which is accessed
				771	through a register map.
				772
Linus Walleij	8317797	2011-05-03 18:14:48 +0200	[diff] [blame]	773	config MFD_DB5500_PRCMU
				774	bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
				775	depends on UX500_SOC_DB5500
				776	select MFD_CORE
				777	help
				778	Select this option to enable support for the DB5500 Power Reset
				779	and Control Management Unit. This is basically an autonomous
				780	system controller running an XP70 microprocessor, which is accessed
				781	through a register map.
				782
Andres Salomon	f71e1af	2010-11-26 11:52:35 +0100	[diff] [blame]	783	config MFD_CS5535
				784	tristate "Support for CS5535 and CS5536 southbridge core functions"
				785	select MFD_CORE
Andres Salomon	15b7cf1	2011-03-27 21:26:03 -0700	[diff] [blame]	786	depends on PCI && X86
Andres Salomon	f71e1af	2010-11-26 11:52:35 +0100	[diff] [blame]	787	---help---
				788	This is the core driver for CS5535/CS5536 MFD functions. This is
				789	necessary for using the board's GPIO and MFGPT functionality.
				790
Richard Röjfors	8edbede	2010-02-04 08:18:52 -0300	[diff] [blame]	791	config MFD_TIMBERDALE
				792	tristate "Support for the Timberdale FPGA"
				793	select MFD_CORE
Randy Dunlap	546e29b	2010-02-12 12:30:55 -0300	[diff] [blame]	794	depends on PCI && GPIOLIB
Richard Röjfors	8edbede	2010-02-04 08:18:52 -0300	[diff] [blame]	795	---help---
				796	This is the core driver for the timberdale FPGA. This device is a
				797	multifunction device which exposes numerous platform devices.
				798
				799	The timberdale FPGA can be found on the Intel Atom development board
				800	for in-vehicle infontainment, called Russellville.
Denis Turischev	e82c60a	2010-02-19 11:26:25 +0100	[diff] [blame]	801
				802	config LPC_SCH
				803	tristate "Intel SCH LPC"
				804	depends on PCI
				805	select MFD_CORE
				806	help
				807	LPC bridge function of the Intel SCH provides support for
				808	System Management Bus and General Purpose I/O.
				809
Florian Fainelli	e090d50	2010-03-21 01:06:05 +0100	[diff] [blame]	810	config MFD_RDC321X
				811	tristate "Support for RDC-R321x southbridge"
				812	select MFD_CORE
				813	depends on PCI
				814	help
				815	Say yes here if you want to have support for the RDC R-321x SoC
				816	southbridge which provides access to GPIOs and Watchdog using the
				817	southbridge PCI device configuration space.
				818
Ira W. Snyder	bd35813	2010-04-07 09:43:00 +0200	[diff] [blame]	819	config MFD_JANZ_CMODIO
				820	tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
				821	select MFD_CORE
				822	depends on PCI
				823	help
				824	This is the core driver for the Janz CMOD-IO PCI MODULbus
				825	carrier board. This device is a PCI to MODULbus bridge which may
				826	host many different types of MODULbus daughterboards, including
				827	CAN and GPIO controllers.
				828
Lars-Peter Clausen	91f4deb	2010-07-12 03:48:08 +0200	[diff] [blame]	829	config MFD_JZ4740_ADC
Lars-Peter Clausen	914e6d4	2011-06-03 03:14:26 +0200	[diff] [blame]	830	bool "Support for the JZ4740 SoC ADC core"
Lars-Peter Clausen	91f4deb	2010-07-12 03:48:08 +0200	[diff] [blame]	831	select MFD_CORE
Lars-Peter Clausen	914e6d4	2011-06-03 03:14:26 +0200	[diff] [blame]	832	select GENERIC_IRQ_CHIP
Lars-Peter Clausen	91f4deb	2010-07-12 03:48:08 +0200	[diff] [blame]	833	depends on MACH_JZ4740
				834	help
				835	Say yes here if you want support for the ADC unit in the JZ4740 SoC.
				836	This driver is necessary for jz4740-battery and jz4740-hwmon driver.
				837
Daniel Drake	375fc77	2010-09-30 21:55:41 +0100	[diff] [blame]	838	config MFD_VX855
				839	tristate "Support for VIA VX855/VX875 integrated south bridge"
				840	depends on PCI
				841	select MFD_CORE
				842	help
				843	Say yes here to enable support for various functions of the
				844	VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
				845	and/or vx855_gpio drivers for this to do anything useful.
				846
Matti Aaltonen	383268a	2010-12-10 11:41:33 -0300	[diff] [blame]	847	config MFD_WL1273_CORE
Matti Aaltonen	94fd5b7	2011-03-01 10:10:35 -0300	[diff] [blame]	848	tristate "Support for TI WL1273 FM radio."
Matti Aaltonen	383268a	2010-12-10 11:41:33 -0300	[diff] [blame]	849	depends on I2C
				850	select MFD_CORE
				851	default n
				852	help
				853	This is the core driver for the TI WL1273 FM radio. This MFD
				854	driver connects the radio-wl1273 V4L2 module and the wl1273
				855	audio codec.
				856
Keshava Munegowda	17cdd29	2011-03-01 20:08:17 +0530	[diff] [blame]	857	config MFD_OMAP_USB_HOST
				858	bool "Support OMAP USBHS core driver"
				859	depends on USB_EHCI_HCD_OMAP \|\| USB_OHCI_HCD_OMAP3
				860	default y
				861	help
				862	This is the core driver for the OAMP EHCI and OHCI drivers.
				863	This MFD driver does the required setup functionalities for
				864	OMAP USB Host drivers.
				865
Abhijeet Dharmapurikar	cbdb53e	2011-04-05 14:40:52 -0700	[diff] [blame]	866	config MFD_PM8XXX
				867	tristate
				868
				869	config MFD_PM8921_CORE
				870	tristate "Qualcomm PM8921 PMIC chip"
				871	depends on MSM_SSBI
				872	select MFD_CORE
				873	select MFD_PM8XXX
				874	help
				875	If you say yes to this option, support will be included for the
				876	built-in PM8921 PMIC chip.
				877
				878	This is required if your board has a PM8921 and uses its features,
				879	such as: MPPs, GPIOs, regulators, interrupts, and PWM.
				880
				881	Say M here if you want to include support for PM8921 chip as a module.
				882	This will build a module called "pm8921-core".
				883
Jay Chokshi	24fc9b6	2011-07-18 10:51:05 -0700	[diff] [blame]	884	config MFD_PM8821_CORE
				885	tristate "Qualcomm PM8821 PMIC chip"
				886	depends on MSM_SSBI
				887	select MFD_CORE
				888	select MFD_PM8XXX
				889	help
				890	If you say yes to this option, support will be included for the
				891	built-in PM8821 PMIC chip.
				892
				893	This is required if your board has a PM8821 and uses its features,
				894	such as: MPPs, and interrupts.
				895
				896	Say M here if you want to include support for PM8821 chip as a module.
				897	This will build a module called "pm8821-core".
				898
David Collins	fdefdf9	2011-09-08 14:18:59 -0700	[diff] [blame]	899	config MFD_PM8018_CORE
				900	tristate "Qualcomm PM8018 PMIC chip"
				901	depends on MSM_SSBI
				902	select MFD_CORE
				903	select MFD_PM8XXX
				904	help
				905	If you say yes to this option, support will be included for the
				906	built-in PM8018 PMIC chip.
				907
				908	This is required if your board has a PM8018 and uses its features,
				909	such as: MPPs, GPIOs, regulators, interrupts, and PWM.
				910
				911	Say M here if you want to include support for PM8018 chip as a module.
				912	This will build a module called "pm8018-core".
				913
Jay Chokshi	9d36a3d	2011-10-26 15:57:51 -0700	[diff] [blame]	914	config MFD_PM8038_CORE
				915	tristate "Qualcomm PM8038 PMIC chip"
				916	depends on MSM_SSBI
				917	select MFD_CORE
				918	select MFD_PM8XXX
				919	help
				920	If you say yes to this option, support will be included for the
				921	built-in PM8038 PMIC chip.
				922
				923	This is required if your board has a PM8038 and uses its features,
				924	such as: MPPs, GPIOs, regulators, interrupts, and PWM.
				925
				926	Say M here if you want to include support for PM8038 chip as a module.
				927	This will build a module called "pm8038-core".
				928
Abhijeet Dharmapurikar	c013f0a	2011-04-05 14:40:53 -0700	[diff] [blame]	929	config MFD_PM8XXX_IRQ
				930	bool "Support for Qualcomm PM8xxx IRQ features"
				931	depends on MFD_PM8XXX
				932	default y if MFD_PM8XXX
				933	help
				934	This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
				935
				936	This is required to use certain other PM 8xxx features, such as GPIO
				937	and MPP.
				938
Jay Chokshi	9e3cbf7	2012-05-25 13:00:28 -0700	[diff] [blame]	939	config MFD_PM8821_IRQ
				940	bool "Support for Qualcomm PM8821 IRQ features"
				941	default y if MFD_PM8821_CORE
				942	help
				943	This is the IRQ driver for Qualcomm PM 8821 PMIC chips.
				944
				945	This is required to use certain other PM 8821 features, such as MPPs.
				946
Axel Lin	8509e14	2011-06-23 10:15:51 +0800	[diff] [blame]	947	config TPS65911_COMPARATOR
				948	tristate
				949
Venu Byravarasu	3c33be0	2012-03-16 11:10:19 +0530	[diff] [blame]	950	config MFD_TPS65090
				951	bool "TPS65090 Power Management chips"
				952	depends on I2C=y && GENERIC_HARDIRQS
				953	select MFD_CORE
				954	select REGMAP_I2C
				955	help
				956	If you say yes here you get support for the TPS65090 series of
				957	Power Management chips.
				958	This driver provides common support for accessing the device,
				959	additional drivers must be enabled in order to use the
				960	functionality of the device.
				961
Jin Park	09d6292	2011-07-04 19:48:12 +0200	[diff] [blame]	962	config MFD_AAT2870_CORE
				963	bool "Support for the AnalogicTech AAT2870"
				964	select MFD_CORE
				965	depends on I2C=y && GPIOLIB
				966	help
				967	If you say yes here you get support for the AAT2870.
				968	This driver provides common support for accessing the device,
				969	additional drivers must be enabled in order to use the
				970	functionality of the device.
				971
Mika Westerberg	1f5a371	2011-09-21 13:03:07 +0200	[diff] [blame]	972	config MFD_INTEL_MSIC
				973	bool "Support for Intel MSIC"
				974	depends on INTEL_SCU_IPC
				975	select MFD_CORE
				976	help
				977	Select this option to enable access to Intel MSIC (Avatele
				978	Passage) chip. This chip embeds audio, battery, GPIO, etc.
				979	devices used in Intel Medfield platforms.
				980
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	981	config MFD_PM8XXX_DEBUG
				982	tristate "Qualcomm PM8xxx debugfs support"
				983	depends on MFD_PM8XXX && DEBUG_FS
				984	default y if MFD_PM8XXX
				985	help
				986	This driver provides a debugfs interface to the SSBI registers on
				987	Qualcomm PM 8xxx PMIC chips. It allows for reads and writes to
				988	arbitrary addresses. Writes are blocking so values are guaranteed to
				989	be set into hardware registers upon return.
				990
				991	config MFD_PM8XXX_PWM
				992	tristate "Support for Qualcomm PM8xxx PWM feature"
				993	depends on MFD_PM8XXX
				994	default y if MFD_PM8XXX
				995	help
				996	This is the Pulse Width Modulation (PWM) driver for Qualcomm
				997	PM 8xxx PMIC chips. It can drive 8 channels of PWM output, and
				998	has a lookup table with size of 64 to be shared by any of the
				999	8 channels.
				1000
				1001	config MFD_PM8XXX_MISC
				1002	tristate "Support for Qualcomm PM8xxx miscellaneous APIs"
				1003	depends on MFD_PM8XXX
				1004	default y if MFD_PM8XXX
				1005	help
				1006	This driver implements several miscellaneous APIs that may be needed
				1007	in order to control the PM8XXX PMIC chip.
				1008
Asish Bhattacharya	656b7a2	2012-03-15 00:27:42 -0700	[diff] [blame]	1009	config MFD_PM8XXX_SPK
				1010	tristate "Support for Qualcomm PM8xxx speaker APIs"
				1011	depends on MFD_PM8XXX
				1012	help
				1013	This driver implements several external speaker amplifier APIs that
				1014	may be needed in order to control the PM8XXX PMIC chip.
				1015
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1016	config MFD_PM8XXX_BATT_ALARM
				1017	tristate "Support for Qualcomm PM8xxx battery voltage alarm"
				1018	depends on MFD_PM8XXX
				1019	help
				1020	This driver provides a means monitor battery under and over-voltage
				1021	conditions. An upper and/or lower threshold can be specified for
				1022	normal operation. A wakeable interrupt is triggered when the battery
				1023	voltage leaves the accepatable range which then calls a notifier call
				1024	chain.
				1025
Asish Bhattacharya	b86c347	2012-02-15 08:31:52 +0530	[diff] [blame]	1026	config WCD9304_CODEC
				1027	tristate "WCD9304 Codec"
				1028	select SLIMBUS
				1029	select MFD_CORE
				1030	default n
				1031	help
				1032	Enables the WCD9304 core driver. The core driver provides
				1033	read/write capability to registers which are part of the
				1034	WCD9304 core and gives the ability to use the WCD9304 codec.
				1035
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1036	config WCD9310_CODEC
				1037	tristate "WCD9310 Codec"
Patrick Lai	ba1706d	2011-07-25 17:02:19 -0700	[diff] [blame]	1038	select SLIMBUS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1039	select MFD_CORE
				1040	default n
				1041	help
				1042	Enables the WCD9310 core driver. The core driver provides
				1043	read/write capability to registers which are part of the
				1044	WCD9310 core and gives the ability to use the WCD9310 codec.
				1045
Kiran Kandi	c3b2440	2012-06-11 00:05:59 -0700	[diff] [blame]	1046	config WCD9320_CODEC
				1047	tristate "WCD9320 Codec"
				1048	select SLIMBUS
				1049	select MFD_CORE
				1050	help
				1051	Enables the WCD9xxx codec core driver. The core driver provides
				1052	read/write capability to registers which are part of the
				1053	WCD9320 core and gives the ability to use the WCD9320 codec.
				1054	The WCD9320 codec support either I2C/I2S or Slimbus for
				1055	control and data exchnage with master processor.
				1056
Banajit Goswami	4d6d891b	2012-12-12 23:59:07 -0800	[diff] [blame]	1057	config WCD9306_CODEC
				1058	tristate "WCD9306 Codec"
				1059	select SLIMBUS
				1060	select MFD_CORE
				1061	help
				1062	Enables the WCD9xxx codec core driver. The core driver provides
				1063	read/write capability to registers which are part of the
				1064	WCD9306 core and gives the ability to use the WCD9306 codec.
				1065	The WCD9306 codec supports either I2C/I2S or Slimbus for
				1066	control and data exchnage with master processor.
Kiran Kandi	c3b2440	2012-06-11 00:05:59 -0700	[diff] [blame]	1067
Laxman Dewangan	1b1247d	2012-02-28 18:35:17 +0530	[diff] [blame]	1068	config MFD_RC5T583
				1069	bool "Ricoh RC5T583 Power Management system device"
Laxman Dewangan	5364d0b8	2012-03-19 11:44:55 +0530	[diff] [blame]	1070	depends on I2C=y && GENERIC_HARDIRQS
Laxman Dewangan	1b1247d	2012-02-28 18:35:17 +0530	[diff] [blame]	1071	select MFD_CORE
				1072	select REGMAP_I2C
				1073	help
				1074	Select this option to get support for the RICOH583 Power
				1075	Management system device.
				1076	This driver provides common support for accessing the device
				1077	through i2c interface. The device supports multiple sub-devices
				1078	like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
				1079	Additional drivers must be enabled in order to use the
				1080	different functionality of the device.
				1081
Ying-Chun Liu (PaulLiu)	75060a1	2012-03-16 21:12:32 +0100	[diff] [blame]	1082	config MFD_ANATOP
				1083	bool "Support for Freescale i.MX on-chip ANATOP controller"
				1084	depends on SOC_IMX6Q
				1085	help
				1086	Select this option to enable Freescale i.MX on-chip ANATOP
				1087	MFD controller. This controller embeds regulator and
				1088	thermal devices for Freescale i.MX platforms.
				1089
Arnd Bergmann	8a0a8e8	2011-09-02 16:43:36 +0200	[diff] [blame]	1090	endmenu
				1091	endif
Ben Dooks	b6d6454	2007-02-20 13:58:01 -0800	[diff] [blame]	1092
Russell King	a4e137a	2005-08-18 10:06:59 +0100	[diff] [blame]	1093	menu "Multimedia Capabilities Port drivers"
Adrian Bunk	f751d50	2006-03-24 03:18:21 -0800	[diff] [blame]	1094	depends on ARCH_SA1100
Russell King	a4e137a	2005-08-18 10:06:59 +0100	[diff] [blame]	1095
				1096	config MCP
				1097	tristate
				1098
Russell King	5e742ad	2005-08-18 10:08:15 +0100	[diff] [blame]	1099	# Interface drivers
				1100	config MCP_SA11X0
				1101	tristate "Support SA11x0 MCP interface"
				1102	depends on ARCH_SA1100
				1103	select MCP
				1104
Russell King	05c45ca	2005-09-11 10:26:31 +0100	[diff] [blame]	1105	# Chip drivers
				1106	config MCP_UCB1200
Russell King	a336440	2012-01-21 14:58:28 +0000	[diff] [blame]	1107	bool "Support for UCB1200 / UCB1300"
				1108	depends on MCP_SA11X0
				1109	select MCP
Russell King	05c45ca	2005-09-11 10:26:31 +0100	[diff] [blame]	1110
Russell King	acb4543	2005-09-11 10:26:57 +0100	[diff] [blame]	1111	config MCP_UCB1200_TS
				1112	tristate "Touchscreen interface support"
				1113	depends on MCP_UCB1200 && INPUT
				1114
Russell King	a4e137a	2005-08-18 10:06:59 +0100	[diff] [blame]	1115	endmenu