drivers/i2c/chips/Kconfig

#
# I2C Sensor and "other" chip configuration
#

menu "Hardware Sensors Chip support"
	depends on I2C

config I2C_SENSOR
	tristate
	default n

config SENSORS_ADM1021
	tristate "Analog Devices ADM1021 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM1021 
	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	  and the XEON processor built-in sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1021.

config SENSORS_ADM1025
	tristate "Analog Devices ADM1025 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM1025
	  and Philips NE1619 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1025.

config SENSORS_ADM1026
	tristate "Analog Devices ADM1026 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM1026
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1026.

config SENSORS_ADM1031
	tristate "Analog Devices ADM1031 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM1031 
	  and ADM1030 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1031.

config SENSORS_ADM9240
	tristate "Analog Devices ADM9240 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM9240,
	  Dallas DS1780, National Semiconductor LM81 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm9240.

config SENSORS_ASB100
	tristate "Asus ASB100 Bach"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the ASB100 Bach sensor
	  chip found on some Asus mainboards.

	  This driver can also be built as a module.  If so, the module
	  will be called asb100.

config SENSORS_ATXP1
	tristate "Attansic ATXP1 VID controller"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Attansic ATXP1 VID
	  controller.

	  If your board have such a chip, you are able to control your CPU
	  core and other voltages.

	  This driver can also be built as a module.  If so, the module
	  will be called atxp1.

config SENSORS_DS1621
	tristate "Dallas Semiconductor DS1621 and DS1625"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1621 and DS1625 sensor chips. 

	  This driver can also be built as a module.  If so, the module
	  will be called ds1621.

config SENSORS_FSCHER
	tristate "FSC Hermes"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Hermes sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscher.

config SENSORS_FSCPOS
	tristate "FSC Poseidon"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Poseidon sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscpos.

config SENSORS_GL518SM
	tristate "Genesys Logic GL518SM"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Genesys Logic GL518SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl518sm.

config SENSORS_GL520SM
	tristate "Genesys Logic GL520SM"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Genesys Logic GL520SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl520sm.

config SENSORS_IT87
	tristate "ITE IT87xx and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for ITE IT87xx sensor chips
	  and clones: SiS960.

	  This driver can also be built as a module.  If so, the module
	  will be called it87.

config SENSORS_LM63
	tristate "National Semiconductor LM63"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the National Semiconductor
	  LM63 remote diode digital temperature sensor with integrated fan
	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	  motherboard, among others.

	  This driver can also be built as a module.  If so, the module
	  will be called lm63.

config SENSORS_LM75
	tristate "National Semiconductor LM75 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM75
	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
	  9-bit precision mode), and TelCom (now Microchip) TCN75.

	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
	  a force module parameter. The driver will not handle the extra
	  precision anyhow.

	  This driver can also be built as a module.  If so, the module
	  will be called lm75.

config SENSORS_LM77
	tristate "National Semiconductor LM77"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM77
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm77.

config SENSORS_LM78
	tristate "National Semiconductor LM78 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM78,
	  LM78-J and LM79.

	  This driver can also be built as a module.  If so, the module
	  will be called lm78.

config SENSORS_LM80
	tristate "National Semiconductor LM80"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor
	  LM80 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm80.

config SENSORS_LM83
	tristate "National Semiconductor LM83"
	depends on I2C
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor
	  LM83 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm83.

config SENSORS_LM85
	tristate "National Semiconductor LM85 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM85
	  sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.

	  This driver can also be built as a module.  If so, the module
	  will be called lm85.

config SENSORS_LM87
	tristate "National Semiconductor LM87"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM87
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm87.

config SENSORS_LM90
	tristate "National Semiconductor LM90 and compatibles"
	depends on I2C
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM90,
	  LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
	  MAX6658 sensor chips.

	  The Analog Devices ADT7461 sensor chip is also supported, but only
	  if found in ADM1032 compatibility mode.

	  This driver can also be built as a module.  If so, the module
	  will be called lm90.

config SENSORS_LM92
	tristate "National Semiconductor LM92 and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM92
	  and Maxim MAX6635 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm92.

config SENSORS_MAX1619
	tristate "Maxim MAX1619 sensor chip"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for MAX1619 sensor chip.
	  
	  This driver can also be built as a module.  If so, the module
	  will be called max1619.

config SENSORS_PC87360
	tristate "National Semiconductor PC87360 family"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC8736x Super-I/O chips.
	  The PC87360, PC87363 and PC87364 only have fan monitoring and
	  control.  The PC87365 and PC87366 additionally have voltage and
	  temperature monitoring.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87360.

config SENSORS_SMSC47B397
	tristate "SMSC LPC47B397-NC"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the SMSC LPC47B397-NC
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47b397.

config SENSORS_SIS5595
	tristate "Silicon Integrated Systems Corp. SiS5595"
	depends on I2C && PCI && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated sensors in
	  SiS5595 South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called sis5595.

config SENSORS_SMSC47M1
	tristate "SMSC LPC47M10x and compatibles"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated fan
	  monitoring and control capabilities of the SMSC LPC47B27x,
	  LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m1.

config SENSORS_VIA686A
	tristate "VIA686A"
	depends on I2C && PCI && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated sensors in
	  Via 686A/B South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called via686a.

config SENSORS_W83781D
	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the Winbond W8378x series
	  of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
	  and the similar Asus AS99127F.
	  
	  This driver can also be built as a module.  If so, the module
	  will be called w83781d.

config SENSORS_W83L785TS
	tristate "Winbond W83L785TS-S"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the Winbond W83L785TS-S
	  sensor chip, which is used on the Asus A7N8X, among other
	  motherboards.
	  
	  This driver can also be built as a module.  If so, the module
	  will be called w83l785ts.

config SENSORS_W83627HF
	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the Winbond W836X7 series
	  of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF

	  This driver can also be built as a module.  If so, the module
	  will be called w83627hf.

config SENSORS_W83627EHF
	tristate "Winbond W83627EHF"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get preliminary support for the hardware
	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.
	  Only fan and temperature inputs are supported at the moment, while
	  the chip does much more than that.

	  This driver can also be built as a module.  If so, the module
	  will be called w83627ehf.

endmenu

menu "Other I2C Chip support"
	depends on I2C

config SENSORS_DS1337
	tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1337 and DS1339 real-time clock chips.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1337.

config SENSORS_EEPROM
	tristate "EEPROM reader"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get read-only access to the EEPROM data
	  available on modern memory DIMMs and Sony Vaio laptops.  Such
	  EEPROMs could theoretically be available on other devices as well.

	  This driver can also be built as a module.  If so, the module
	  will be called eeprom.

config SENSORS_PCF8574
	tristate "Philips PCF8574 and PCF8574A"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Philips PCF8574 and 
	  PCF8574A chips.

	  This driver can also be built as a module.  If so, the module
	  will be called pcf8574.

config SENSORS_PCF8591
	tristate "Philips PCF8591"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Philips PCF8591 chips.

	  This driver can also be built as a module.  If so, the module
	  will be called pcf8591.

config SENSORS_RTC8564
	tristate "Epson 8564 RTC chip"
	depends on I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the Epson 8564 RTC chip.

	  This driver can also be built as a module.  If so, the module
	  will be called i2c-rtc8564.

config ISP1301_OMAP
	tristate "Philips ISP1301 with OMAP OTG"
	depends on I2C && ARCH_OMAP_OTG
	help
	  If you say yes here you get support for the Philips ISP1301
	  USB-On-The-Go transceiver working with the OMAP OTG controller.
	  The ISP1301 is used in products including H2 and H3 development
	  boards for Texas Instruments OMAP processors.
	  
	  This driver can also be built as a module.  If so, the module
	  will be called isp1301_omap.

# NOTE:  This isn't really OMAP-specific, except for the current
# interface location in  <include/asm-arm/arch-omap/tps65010.h>
# and having mostly OMAP-specific board support
config TPS65010
	tristate "TPS6501x Power Management chips"
	depends on I2C && ARCH_OMAP
	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
	help
	  If you say yes here you get support for the TPS6501x series of
	  Power Management chips.  These include voltage regulators,
	  lithium ion/polymer battery charging, and other features that
	  are often used in portable devices like cell phones and cameras.

	  This driver can also be built as a module.  If so, the module
	  will be called tps65010.


config SENSORS_M41T00
	tristate "ST M41T00 RTC chip"
	depends on I2C && PPC32
	help
	  If you say yes here you get support for the ST M41T00 RTC chip.

	  This driver can also be built as a module.  If so, the module
	  will be called m41t00.

endmenu