| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Definitions for the KLSI KL5KUSB105 serial port adapter |
| 3 | */ |
| 4 | |
| 5 | /* vendor/product pairs that are known to contain this chipset */ |
| 6 | #define PALMCONNECT_VID 0x0830 |
| 7 | #define PALMCONNECT_PID 0x0080 |
| 8 | |
| 9 | #define KLSI_VID 0x05e9 |
| 10 | #define KLSI_KL5KUSB105D_PID 0x00c0 |
| 11 | |
| 12 | /* Vendor commands: */ |
| 13 | |
| 14 | |
| 15 | /* port table -- the chip supports up to 4 channels */ |
| 16 | |
| 17 | /* baud rates */ |
| 18 | |
| 19 | enum { |
| 20 | kl5kusb105a_sio_b115200 = 0, |
| 21 | kl5kusb105a_sio_b57600 = 1, |
| 22 | kl5kusb105a_sio_b38400 = 2, |
| 23 | kl5kusb105a_sio_b19200 = 4, |
| 24 | kl5kusb105a_sio_b14400 = 5, |
| 25 | kl5kusb105a_sio_b9600 = 6, |
| 26 | kl5kusb105a_sio_b4800 = 8, /* unchecked */ |
| 27 | kl5kusb105a_sio_b2400 = 9, /* unchecked */ |
| 28 | kl5kusb105a_sio_b1200 = 0xa, /* unchecked */ |
| 29 | kl5kusb105a_sio_b600 = 0xb /* unchecked */ |
| 30 | }; |
| 31 | |
| 32 | /* data bits */ |
| 33 | #define kl5kusb105a_dtb_7 7 |
| 34 | #define kl5kusb105a_dtb_8 8 |
| 35 | |
| 36 | |
| 37 | |
| 38 | /* requests: */ |
| 39 | #define KL5KUSB105A_SIO_SET_DATA 1 |
| 40 | #define KL5KUSB105A_SIO_POLL 2 |
| 41 | #define KL5KUSB105A_SIO_CONFIGURE 3 |
| 42 | /* values used for request KL5KUSB105A_SIO_CONFIGURE */ |
| 43 | #define KL5KUSB105A_SIO_CONFIGURE_READ_ON 3 |
| 44 | #define KL5KUSB105A_SIO_CONFIGURE_READ_OFF 2 |
| 45 | |
| 46 | /* Interpretation of modem status lines */ |
| 47 | /* These need sorting out by individually connecting pins and checking |
| 48 | * results. FIXME! |
| 49 | * When data is being sent we see 0x30 in the lower byte; this must |
| 50 | * contain DSR and CTS ... |
| 51 | */ |
| 52 | #define KL5KUSB105A_DSR ((1<<4) | (1<<5)) |
| 53 | #define KL5KUSB105A_CTS ((1<<5) | (1<<4)) |
| 54 | |
| 55 | #define KL5KUSB105A_WANTS_TO_SEND 0x30 |
| 56 | //#define KL5KUSB105A_DTR /* Data Terminal Ready */ |
| 57 | //#define KL5KUSB105A_CTS /* Clear To Send */ |
| 58 | //#define KL5KUSB105A_CD /* Carrier Detect */ |
| 59 | //#define KL5KUSB105A_DSR /* Data Set Ready */ |
| 60 | //#define KL5KUSB105A_RxD /* Receive pin */ |
| 61 | |
| 62 | //#define KL5KUSB105A_LE |
| 63 | //#define KL5KUSB105A_RTS |
| 64 | //#define KL5KUSB105A_ST |
| 65 | //#define KL5KUSB105A_SR |
| 66 | //#define KL5KUSB105A_RI /* Ring Indicator */ |
| 67 | |
| 68 | /* vim: set ts=8 sts=8: */ |
| 69 | |