Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 1 | /* |
| 2 | * AT42QT602240/ATMXT224 Touchscreen driver |
| 3 | * |
| 4 | * Copyright (C) 2010 Samsung Electronics Co.Ltd |
| 5 | * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License as published by the |
| 9 | * Free Software Foundation; either version 2 of the License, or (at your |
| 10 | * option) any later version. |
| 11 | * |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/init.h> |
| 16 | #include <linux/delay.h> |
| 17 | #include <linux/firmware.h> |
| 18 | #include <linux/i2c.h> |
| 19 | #include <linux/i2c/qt602240_ts.h> |
| 20 | #include <linux/input.h> |
| 21 | #include <linux/interrupt.h> |
| 22 | #include <linux/slab.h> |
| 23 | |
| 24 | /* Version */ |
| 25 | #define QT602240_VER_20 20 |
| 26 | #define QT602240_VER_21 21 |
| 27 | #define QT602240_VER_22 22 |
| 28 | |
| 29 | /* Slave addresses */ |
| 30 | #define QT602240_APP_LOW 0x4a |
| 31 | #define QT602240_APP_HIGH 0x4b |
| 32 | #define QT602240_BOOT_LOW 0x24 |
| 33 | #define QT602240_BOOT_HIGH 0x25 |
| 34 | |
| 35 | /* Firmware */ |
| 36 | #define QT602240_FW_NAME "qt602240.fw" |
| 37 | |
| 38 | /* Registers */ |
| 39 | #define QT602240_FAMILY_ID 0x00 |
| 40 | #define QT602240_VARIANT_ID 0x01 |
| 41 | #define QT602240_VERSION 0x02 |
| 42 | #define QT602240_BUILD 0x03 |
| 43 | #define QT602240_MATRIX_X_SIZE 0x04 |
| 44 | #define QT602240_MATRIX_Y_SIZE 0x05 |
| 45 | #define QT602240_OBJECT_NUM 0x06 |
| 46 | #define QT602240_OBJECT_START 0x07 |
| 47 | |
| 48 | #define QT602240_OBJECT_SIZE 6 |
| 49 | |
| 50 | /* Object types */ |
| 51 | #define QT602240_DEBUG_DIAGNOSTIC 37 |
| 52 | #define QT602240_GEN_MESSAGE 5 |
| 53 | #define QT602240_GEN_COMMAND 6 |
| 54 | #define QT602240_GEN_POWER 7 |
| 55 | #define QT602240_GEN_ACQUIRE 8 |
| 56 | #define QT602240_TOUCH_MULTI 9 |
| 57 | #define QT602240_TOUCH_KEYARRAY 15 |
| 58 | #define QT602240_TOUCH_PROXIMITY 23 |
| 59 | #define QT602240_PROCI_GRIPFACE 20 |
| 60 | #define QT602240_PROCG_NOISE 22 |
| 61 | #define QT602240_PROCI_ONETOUCH 24 |
| 62 | #define QT602240_PROCI_TWOTOUCH 27 |
| 63 | #define QT602240_SPT_COMMSCONFIG 18 /* firmware ver 21 over */ |
| 64 | #define QT602240_SPT_GPIOPWM 19 |
| 65 | #define QT602240_SPT_SELFTEST 25 |
| 66 | #define QT602240_SPT_CTECONFIG 28 |
| 67 | #define QT602240_SPT_USERDATA 38 /* firmware ver 21 over */ |
| 68 | |
| 69 | /* QT602240_GEN_COMMAND field */ |
| 70 | #define QT602240_COMMAND_RESET 0 |
| 71 | #define QT602240_COMMAND_BACKUPNV 1 |
| 72 | #define QT602240_COMMAND_CALIBRATE 2 |
| 73 | #define QT602240_COMMAND_REPORTALL 3 |
| 74 | #define QT602240_COMMAND_DIAGNOSTIC 5 |
| 75 | |
| 76 | /* QT602240_GEN_POWER field */ |
| 77 | #define QT602240_POWER_IDLEACQINT 0 |
| 78 | #define QT602240_POWER_ACTVACQINT 1 |
| 79 | #define QT602240_POWER_ACTV2IDLETO 2 |
| 80 | |
| 81 | /* QT602240_GEN_ACQUIRE field */ |
| 82 | #define QT602240_ACQUIRE_CHRGTIME 0 |
| 83 | #define QT602240_ACQUIRE_TCHDRIFT 2 |
| 84 | #define QT602240_ACQUIRE_DRIFTST 3 |
| 85 | #define QT602240_ACQUIRE_TCHAUTOCAL 4 |
| 86 | #define QT602240_ACQUIRE_SYNC 5 |
| 87 | #define QT602240_ACQUIRE_ATCHCALST 6 |
| 88 | #define QT602240_ACQUIRE_ATCHCALSTHR 7 |
| 89 | |
| 90 | /* QT602240_TOUCH_MULTI field */ |
| 91 | #define QT602240_TOUCH_CTRL 0 |
| 92 | #define QT602240_TOUCH_XORIGIN 1 |
| 93 | #define QT602240_TOUCH_YORIGIN 2 |
| 94 | #define QT602240_TOUCH_XSIZE 3 |
| 95 | #define QT602240_TOUCH_YSIZE 4 |
| 96 | #define QT602240_TOUCH_BLEN 6 |
| 97 | #define QT602240_TOUCH_TCHTHR 7 |
| 98 | #define QT602240_TOUCH_TCHDI 8 |
| 99 | #define QT602240_TOUCH_ORIENT 9 |
| 100 | #define QT602240_TOUCH_MOVHYSTI 11 |
| 101 | #define QT602240_TOUCH_MOVHYSTN 12 |
| 102 | #define QT602240_TOUCH_NUMTOUCH 14 |
| 103 | #define QT602240_TOUCH_MRGHYST 15 |
| 104 | #define QT602240_TOUCH_MRGTHR 16 |
| 105 | #define QT602240_TOUCH_AMPHYST 17 |
| 106 | #define QT602240_TOUCH_XRANGE_LSB 18 |
| 107 | #define QT602240_TOUCH_XRANGE_MSB 19 |
| 108 | #define QT602240_TOUCH_YRANGE_LSB 20 |
| 109 | #define QT602240_TOUCH_YRANGE_MSB 21 |
| 110 | #define QT602240_TOUCH_XLOCLIP 22 |
| 111 | #define QT602240_TOUCH_XHICLIP 23 |
| 112 | #define QT602240_TOUCH_YLOCLIP 24 |
| 113 | #define QT602240_TOUCH_YHICLIP 25 |
| 114 | #define QT602240_TOUCH_XEDGECTRL 26 |
| 115 | #define QT602240_TOUCH_XEDGEDIST 27 |
| 116 | #define QT602240_TOUCH_YEDGECTRL 28 |
| 117 | #define QT602240_TOUCH_YEDGEDIST 29 |
| 118 | #define QT602240_TOUCH_JUMPLIMIT 30 /* firmware ver 22 over */ |
| 119 | |
| 120 | /* QT602240_PROCI_GRIPFACE field */ |
| 121 | #define QT602240_GRIPFACE_CTRL 0 |
| 122 | #define QT602240_GRIPFACE_XLOGRIP 1 |
| 123 | #define QT602240_GRIPFACE_XHIGRIP 2 |
| 124 | #define QT602240_GRIPFACE_YLOGRIP 3 |
| 125 | #define QT602240_GRIPFACE_YHIGRIP 4 |
| 126 | #define QT602240_GRIPFACE_MAXTCHS 5 |
| 127 | #define QT602240_GRIPFACE_SZTHR1 7 |
| 128 | #define QT602240_GRIPFACE_SZTHR2 8 |
| 129 | #define QT602240_GRIPFACE_SHPTHR1 9 |
| 130 | #define QT602240_GRIPFACE_SHPTHR2 10 |
| 131 | #define QT602240_GRIPFACE_SUPEXTTO 11 |
| 132 | |
| 133 | /* QT602240_PROCI_NOISE field */ |
| 134 | #define QT602240_NOISE_CTRL 0 |
| 135 | #define QT602240_NOISE_OUTFLEN 1 |
| 136 | #define QT602240_NOISE_GCAFUL_LSB 3 |
| 137 | #define QT602240_NOISE_GCAFUL_MSB 4 |
| 138 | #define QT602240_NOISE_GCAFLL_LSB 5 |
| 139 | #define QT602240_NOISE_GCAFLL_MSB 6 |
| 140 | #define QT602240_NOISE_ACTVGCAFVALID 7 |
| 141 | #define QT602240_NOISE_NOISETHR 8 |
| 142 | #define QT602240_NOISE_FREQHOPSCALE 10 |
| 143 | #define QT602240_NOISE_FREQ0 11 |
| 144 | #define QT602240_NOISE_FREQ1 12 |
| 145 | #define QT602240_NOISE_FREQ2 13 |
| 146 | #define QT602240_NOISE_FREQ3 14 |
| 147 | #define QT602240_NOISE_FREQ4 15 |
| 148 | #define QT602240_NOISE_IDLEGCAFVALID 16 |
| 149 | |
| 150 | /* QT602240_SPT_COMMSCONFIG */ |
| 151 | #define QT602240_COMMS_CTRL 0 |
| 152 | #define QT602240_COMMS_CMD 1 |
| 153 | |
| 154 | /* QT602240_SPT_CTECONFIG field */ |
| 155 | #define QT602240_CTE_CTRL 0 |
| 156 | #define QT602240_CTE_CMD 1 |
| 157 | #define QT602240_CTE_MODE 2 |
| 158 | #define QT602240_CTE_IDLEGCAFDEPTH 3 |
| 159 | #define QT602240_CTE_ACTVGCAFDEPTH 4 |
| 160 | #define QT602240_CTE_VOLTAGE 5 /* firmware ver 21 over */ |
| 161 | |
| 162 | #define QT602240_VOLTAGE_DEFAULT 2700000 |
| 163 | #define QT602240_VOLTAGE_STEP 10000 |
| 164 | |
| 165 | /* Define for QT602240_GEN_COMMAND */ |
| 166 | #define QT602240_BOOT_VALUE 0xa5 |
| 167 | #define QT602240_BACKUP_VALUE 0x55 |
| 168 | #define QT602240_BACKUP_TIME 25 /* msec */ |
| 169 | #define QT602240_RESET_TIME 65 /* msec */ |
| 170 | |
| 171 | #define QT602240_FWRESET_TIME 175 /* msec */ |
| 172 | |
| 173 | /* Command to unlock bootloader */ |
| 174 | #define QT602240_UNLOCK_CMD_MSB 0xaa |
| 175 | #define QT602240_UNLOCK_CMD_LSB 0xdc |
| 176 | |
| 177 | /* Bootloader mode status */ |
| 178 | #define QT602240_WAITING_BOOTLOAD_CMD 0xc0 /* valid 7 6 bit only */ |
| 179 | #define QT602240_WAITING_FRAME_DATA 0x80 /* valid 7 6 bit only */ |
| 180 | #define QT602240_FRAME_CRC_CHECK 0x02 |
| 181 | #define QT602240_FRAME_CRC_FAIL 0x03 |
| 182 | #define QT602240_FRAME_CRC_PASS 0x04 |
| 183 | #define QT602240_APP_CRC_FAIL 0x40 /* valid 7 8 bit only */ |
| 184 | #define QT602240_BOOT_STATUS_MASK 0x3f |
| 185 | |
| 186 | /* Touch status */ |
| 187 | #define QT602240_SUPPRESS (1 << 1) |
| 188 | #define QT602240_AMP (1 << 2) |
| 189 | #define QT602240_VECTOR (1 << 3) |
| 190 | #define QT602240_MOVE (1 << 4) |
| 191 | #define QT602240_RELEASE (1 << 5) |
| 192 | #define QT602240_PRESS (1 << 6) |
| 193 | #define QT602240_DETECT (1 << 7) |
| 194 | |
| 195 | /* Touchscreen absolute values */ |
| 196 | #define QT602240_MAX_XC 0x3ff |
| 197 | #define QT602240_MAX_YC 0x3ff |
| 198 | #define QT602240_MAX_AREA 0xff |
| 199 | |
| 200 | #define QT602240_MAX_FINGER 10 |
| 201 | |
| 202 | /* Initial register values recommended from chip vendor */ |
| 203 | static const u8 init_vals_ver_20[] = { |
| 204 | /* QT602240_GEN_COMMAND(6) */ |
| 205 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 206 | /* QT602240_GEN_POWER(7) */ |
| 207 | 0x20, 0xff, 0x32, |
| 208 | /* QT602240_GEN_ACQUIRE(8) */ |
| 209 | 0x08, 0x05, 0x05, 0x00, 0x00, 0x00, 0x05, 0x14, |
| 210 | /* QT602240_TOUCH_MULTI(9) */ |
| 211 | 0x00, 0x00, 0x00, 0x11, 0x0a, 0x00, 0x00, 0x00, 0x02, 0x00, |
| 212 | 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, |
| 213 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x64, |
| 214 | /* QT602240_TOUCH_KEYARRAY(15) */ |
| 215 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 216 | 0x00, |
| 217 | /* QT602240_SPT_GPIOPWM(19) */ |
| 218 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 219 | 0x00, 0x00, |
| 220 | /* QT602240_PROCI_GRIPFACE(20) */ |
| 221 | 0x00, 0x64, 0x64, 0x64, 0x64, 0x00, 0x00, 0x1e, 0x14, 0x04, |
| 222 | 0x1e, 0x00, |
| 223 | /* QT602240_PROCG_NOISE(22) */ |
| 224 | 0x05, 0x00, 0x00, 0x19, 0x00, 0xe7, 0xff, 0x04, 0x32, 0x00, |
| 225 | 0x01, 0x0a, 0x0f, 0x14, 0x00, 0x00, 0xe8, |
| 226 | /* QT602240_TOUCH_PROXIMITY(23) */ |
| 227 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 228 | 0x00, 0x00, 0x00, |
| 229 | /* QT602240_PROCI_ONETOUCH(24) */ |
| 230 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 231 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 232 | /* QT602240_SPT_SELFTEST(25) */ |
| 233 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 234 | 0x00, 0x00, 0x00, 0x00, |
| 235 | /* QT602240_PROCI_TWOTOUCH(27) */ |
| 236 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 237 | /* QT602240_SPT_CTECONFIG(28) */ |
| 238 | 0x00, 0x00, 0x00, 0x04, 0x08, |
| 239 | }; |
| 240 | |
| 241 | static const u8 init_vals_ver_21[] = { |
| 242 | /* QT602240_GEN_COMMAND(6) */ |
| 243 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 244 | /* QT602240_GEN_POWER(7) */ |
| 245 | 0x20, 0xff, 0x32, |
| 246 | /* QT602240_GEN_ACQUIRE(8) */ |
| 247 | 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, |
| 248 | /* QT602240_TOUCH_MULTI(9) */ |
| 249 | 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, |
| 250 | 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, |
| 251 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 252 | /* QT602240_TOUCH_KEYARRAY(15) */ |
| 253 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 254 | 0x00, |
| 255 | /* QT602240_SPT_GPIOPWM(19) */ |
| 256 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 257 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 258 | /* QT602240_PROCI_GRIPFACE(20) */ |
| 259 | 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, |
| 260 | 0x0f, 0x0a, |
| 261 | /* QT602240_PROCG_NOISE(22) */ |
| 262 | 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, |
| 263 | 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, |
| 264 | /* QT602240_TOUCH_PROXIMITY(23) */ |
| 265 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 266 | 0x00, 0x00, 0x00, |
| 267 | /* QT602240_PROCI_ONETOUCH(24) */ |
| 268 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 269 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 270 | /* QT602240_SPT_SELFTEST(25) */ |
| 271 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 272 | 0x00, 0x00, 0x00, 0x00, |
| 273 | /* QT602240_PROCI_TWOTOUCH(27) */ |
| 274 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 275 | /* QT602240_SPT_CTECONFIG(28) */ |
| 276 | 0x00, 0x00, 0x00, 0x08, 0x10, 0x00, |
| 277 | }; |
| 278 | |
| 279 | static const u8 init_vals_ver_22[] = { |
| 280 | /* QT602240_GEN_COMMAND(6) */ |
| 281 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 282 | /* QT602240_GEN_POWER(7) */ |
| 283 | 0x20, 0xff, 0x32, |
| 284 | /* QT602240_GEN_ACQUIRE(8) */ |
| 285 | 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, |
| 286 | /* QT602240_TOUCH_MULTI(9) */ |
| 287 | 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, |
| 288 | 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, |
| 289 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 290 | 0x00, |
| 291 | /* QT602240_TOUCH_KEYARRAY(15) */ |
| 292 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 293 | 0x00, |
| 294 | /* QT602240_SPT_GPIOPWM(19) */ |
| 295 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 296 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 297 | /* QT602240_PROCI_GRIPFACE(20) */ |
| 298 | 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, |
| 299 | 0x0f, 0x0a, |
| 300 | /* QT602240_PROCG_NOISE(22) */ |
| 301 | 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, |
| 302 | 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, |
| 303 | /* QT602240_TOUCH_PROXIMITY(23) */ |
| 304 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 305 | 0x00, 0x00, 0x00, 0x00, 0x00, |
| 306 | /* QT602240_PROCI_ONETOUCH(24) */ |
| 307 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 308 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 309 | /* QT602240_SPT_SELFTEST(25) */ |
| 310 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 311 | 0x00, 0x00, 0x00, 0x00, |
| 312 | /* QT602240_PROCI_TWOTOUCH(27) */ |
| 313 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 314 | /* QT602240_SPT_CTECONFIG(28) */ |
| 315 | 0x00, 0x00, 0x00, 0x08, 0x10, 0x00, |
| 316 | }; |
| 317 | |
| 318 | struct qt602240_info { |
| 319 | u8 family_id; |
| 320 | u8 variant_id; |
| 321 | u8 version; |
| 322 | u8 build; |
| 323 | u8 matrix_xsize; |
| 324 | u8 matrix_ysize; |
| 325 | u8 object_num; |
| 326 | }; |
| 327 | |
| 328 | struct qt602240_object { |
| 329 | u8 type; |
| 330 | u16 start_address; |
| 331 | u8 size; |
| 332 | u8 instances; |
| 333 | u8 num_report_ids; |
| 334 | |
| 335 | /* to map object and message */ |
| 336 | u8 max_reportid; |
| 337 | }; |
| 338 | |
| 339 | struct qt602240_message { |
| 340 | u8 reportid; |
| 341 | u8 message[7]; |
| 342 | u8 checksum; |
| 343 | }; |
| 344 | |
| 345 | struct qt602240_finger { |
| 346 | int status; |
| 347 | int x; |
| 348 | int y; |
| 349 | int area; |
| 350 | }; |
| 351 | |
| 352 | /* Each client has this additional data */ |
| 353 | struct qt602240_data { |
| 354 | struct i2c_client *client; |
| 355 | struct input_dev *input_dev; |
| 356 | const struct qt602240_platform_data *pdata; |
| 357 | struct qt602240_object *object_table; |
| 358 | struct qt602240_info info; |
| 359 | struct qt602240_finger finger[QT602240_MAX_FINGER]; |
| 360 | unsigned int irq; |
| 361 | }; |
| 362 | |
| 363 | static bool qt602240_object_readable(unsigned int type) |
| 364 | { |
| 365 | switch (type) { |
| 366 | case QT602240_GEN_MESSAGE: |
| 367 | case QT602240_GEN_COMMAND: |
| 368 | case QT602240_GEN_POWER: |
| 369 | case QT602240_GEN_ACQUIRE: |
| 370 | case QT602240_TOUCH_MULTI: |
| 371 | case QT602240_TOUCH_KEYARRAY: |
| 372 | case QT602240_TOUCH_PROXIMITY: |
| 373 | case QT602240_PROCI_GRIPFACE: |
| 374 | case QT602240_PROCG_NOISE: |
| 375 | case QT602240_PROCI_ONETOUCH: |
| 376 | case QT602240_PROCI_TWOTOUCH: |
| 377 | case QT602240_SPT_COMMSCONFIG: |
| 378 | case QT602240_SPT_GPIOPWM: |
| 379 | case QT602240_SPT_SELFTEST: |
| 380 | case QT602240_SPT_CTECONFIG: |
| 381 | case QT602240_SPT_USERDATA: |
| 382 | return true; |
| 383 | default: |
| 384 | return false; |
| 385 | } |
| 386 | } |
| 387 | |
| 388 | static bool qt602240_object_writable(unsigned int type) |
| 389 | { |
| 390 | switch (type) { |
| 391 | case QT602240_GEN_COMMAND: |
| 392 | case QT602240_GEN_POWER: |
| 393 | case QT602240_GEN_ACQUIRE: |
| 394 | case QT602240_TOUCH_MULTI: |
| 395 | case QT602240_TOUCH_KEYARRAY: |
| 396 | case QT602240_TOUCH_PROXIMITY: |
| 397 | case QT602240_PROCI_GRIPFACE: |
| 398 | case QT602240_PROCG_NOISE: |
| 399 | case QT602240_PROCI_ONETOUCH: |
| 400 | case QT602240_PROCI_TWOTOUCH: |
| 401 | case QT602240_SPT_GPIOPWM: |
| 402 | case QT602240_SPT_SELFTEST: |
| 403 | case QT602240_SPT_CTECONFIG: |
| 404 | return true; |
| 405 | default: |
| 406 | return false; |
| 407 | } |
| 408 | } |
| 409 | |
| 410 | static void qt602240_dump_message(struct device *dev, |
| 411 | struct qt602240_message *message) |
| 412 | { |
| 413 | dev_dbg(dev, "reportid:\t0x%x\n", message->reportid); |
| 414 | dev_dbg(dev, "message1:\t0x%x\n", message->message[0]); |
| 415 | dev_dbg(dev, "message2:\t0x%x\n", message->message[1]); |
| 416 | dev_dbg(dev, "message3:\t0x%x\n", message->message[2]); |
| 417 | dev_dbg(dev, "message4:\t0x%x\n", message->message[3]); |
| 418 | dev_dbg(dev, "message5:\t0x%x\n", message->message[4]); |
| 419 | dev_dbg(dev, "message6:\t0x%x\n", message->message[5]); |
| 420 | dev_dbg(dev, "message7:\t0x%x\n", message->message[6]); |
| 421 | dev_dbg(dev, "checksum:\t0x%x\n", message->checksum); |
| 422 | } |
| 423 | |
| 424 | static int qt602240_check_bootloader(struct i2c_client *client, |
| 425 | unsigned int state) |
| 426 | { |
| 427 | u8 val; |
| 428 | |
| 429 | recheck: |
| 430 | if (i2c_master_recv(client, &val, 1) != 1) { |
| 431 | dev_err(&client->dev, "%s: i2c recv failed\n", __func__); |
| 432 | return -EIO; |
| 433 | } |
| 434 | |
| 435 | switch (state) { |
| 436 | case QT602240_WAITING_BOOTLOAD_CMD: |
| 437 | case QT602240_WAITING_FRAME_DATA: |
| 438 | val &= ~QT602240_BOOT_STATUS_MASK; |
| 439 | break; |
| 440 | case QT602240_FRAME_CRC_PASS: |
| 441 | if (val == QT602240_FRAME_CRC_CHECK) |
| 442 | goto recheck; |
| 443 | break; |
| 444 | default: |
| 445 | return -EINVAL; |
| 446 | } |
| 447 | |
| 448 | if (val != state) { |
| 449 | dev_err(&client->dev, "Unvalid bootloader mode state\n"); |
| 450 | return -EINVAL; |
| 451 | } |
| 452 | |
| 453 | return 0; |
| 454 | } |
| 455 | |
| 456 | static int qt602240_unlock_bootloader(struct i2c_client *client) |
| 457 | { |
| 458 | u8 buf[2]; |
| 459 | |
| 460 | buf[0] = QT602240_UNLOCK_CMD_LSB; |
| 461 | buf[1] = QT602240_UNLOCK_CMD_MSB; |
| 462 | |
| 463 | if (i2c_master_send(client, buf, 2) != 2) { |
| 464 | dev_err(&client->dev, "%s: i2c send failed\n", __func__); |
| 465 | return -EIO; |
| 466 | } |
| 467 | |
| 468 | return 0; |
| 469 | } |
| 470 | |
| 471 | static int qt602240_fw_write(struct i2c_client *client, |
| 472 | const u8 *data, unsigned int frame_size) |
| 473 | { |
| 474 | if (i2c_master_send(client, data, frame_size) != frame_size) { |
| 475 | dev_err(&client->dev, "%s: i2c send failed\n", __func__); |
| 476 | return -EIO; |
| 477 | } |
| 478 | |
| 479 | return 0; |
| 480 | } |
| 481 | |
| 482 | static int __qt602240_read_reg(struct i2c_client *client, |
| 483 | u16 reg, u16 len, void *val) |
| 484 | { |
| 485 | struct i2c_msg xfer[2]; |
| 486 | u8 buf[2]; |
| 487 | |
| 488 | buf[0] = reg & 0xff; |
| 489 | buf[1] = (reg >> 8) & 0xff; |
| 490 | |
| 491 | /* Write register */ |
| 492 | xfer[0].addr = client->addr; |
| 493 | xfer[0].flags = 0; |
| 494 | xfer[0].len = 2; |
| 495 | xfer[0].buf = buf; |
| 496 | |
| 497 | /* Read data */ |
| 498 | xfer[1].addr = client->addr; |
| 499 | xfer[1].flags = I2C_M_RD; |
| 500 | xfer[1].len = len; |
| 501 | xfer[1].buf = val; |
| 502 | |
| 503 | if (i2c_transfer(client->adapter, xfer, 2) != 2) { |
| 504 | dev_err(&client->dev, "%s: i2c transfer failed\n", __func__); |
| 505 | return -EIO; |
| 506 | } |
| 507 | |
| 508 | return 0; |
| 509 | } |
| 510 | |
| 511 | static int qt602240_read_reg(struct i2c_client *client, u16 reg, u8 *val) |
| 512 | { |
| 513 | return __qt602240_read_reg(client, reg, 1, val); |
| 514 | } |
| 515 | |
| 516 | static int qt602240_write_reg(struct i2c_client *client, u16 reg, u8 val) |
| 517 | { |
| 518 | u8 buf[3]; |
| 519 | |
| 520 | buf[0] = reg & 0xff; |
| 521 | buf[1] = (reg >> 8) & 0xff; |
| 522 | buf[2] = val; |
| 523 | |
| 524 | if (i2c_master_send(client, buf, 3) != 3) { |
| 525 | dev_err(&client->dev, "%s: i2c send failed\n", __func__); |
| 526 | return -EIO; |
| 527 | } |
| 528 | |
| 529 | return 0; |
| 530 | } |
| 531 | |
| 532 | static int qt602240_read_object_table(struct i2c_client *client, |
| 533 | u16 reg, u8 *object_buf) |
| 534 | { |
| 535 | return __qt602240_read_reg(client, reg, QT602240_OBJECT_SIZE, |
| 536 | object_buf); |
| 537 | } |
| 538 | |
| 539 | static struct qt602240_object * |
| 540 | qt602240_get_object(struct qt602240_data *data, u8 type) |
| 541 | { |
| 542 | struct qt602240_object *object; |
| 543 | int i; |
| 544 | |
| 545 | for (i = 0; i < data->info.object_num; i++) { |
| 546 | object = data->object_table + i; |
| 547 | if (object->type == type) |
| 548 | return object; |
| 549 | } |
| 550 | |
| 551 | dev_err(&data->client->dev, "Invalid object type\n"); |
| 552 | return NULL; |
| 553 | } |
| 554 | |
| 555 | static int qt602240_read_message(struct qt602240_data *data, |
| 556 | struct qt602240_message *message) |
| 557 | { |
| 558 | struct qt602240_object *object; |
| 559 | u16 reg; |
| 560 | |
| 561 | object = qt602240_get_object(data, QT602240_GEN_MESSAGE); |
| 562 | if (!object) |
| 563 | return -EINVAL; |
| 564 | |
| 565 | reg = object->start_address; |
| 566 | return __qt602240_read_reg(data->client, reg, |
| 567 | sizeof(struct qt602240_message), message); |
| 568 | } |
| 569 | |
| 570 | static int qt602240_read_object(struct qt602240_data *data, |
| 571 | u8 type, u8 offset, u8 *val) |
| 572 | { |
| 573 | struct qt602240_object *object; |
| 574 | u16 reg; |
| 575 | |
| 576 | object = qt602240_get_object(data, type); |
| 577 | if (!object) |
| 578 | return -EINVAL; |
| 579 | |
| 580 | reg = object->start_address; |
| 581 | return __qt602240_read_reg(data->client, reg + offset, 1, val); |
| 582 | } |
| 583 | |
| 584 | static int qt602240_write_object(struct qt602240_data *data, |
| 585 | u8 type, u8 offset, u8 val) |
| 586 | { |
| 587 | struct qt602240_object *object; |
| 588 | u16 reg; |
| 589 | |
| 590 | object = qt602240_get_object(data, type); |
| 591 | if (!object) |
| 592 | return -EINVAL; |
| 593 | |
| 594 | reg = object->start_address; |
| 595 | return qt602240_write_reg(data->client, reg + offset, val); |
| 596 | } |
| 597 | |
| 598 | static void qt602240_input_report(struct qt602240_data *data, int single_id) |
| 599 | { |
| 600 | struct qt602240_finger *finger = data->finger; |
| 601 | struct input_dev *input_dev = data->input_dev; |
| 602 | int status = finger[single_id].status; |
| 603 | int finger_num = 0; |
| 604 | int id; |
| 605 | |
| 606 | for (id = 0; id < QT602240_MAX_FINGER; id++) { |
| 607 | if (!finger[id].status) |
| 608 | continue; |
| 609 | |
| 610 | input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, |
| 611 | finger[id].status != QT602240_RELEASE ? |
| 612 | finger[id].area : 0); |
| 613 | input_report_abs(input_dev, ABS_MT_POSITION_X, |
| 614 | finger[id].x); |
| 615 | input_report_abs(input_dev, ABS_MT_POSITION_Y, |
| 616 | finger[id].y); |
| 617 | input_mt_sync(input_dev); |
| 618 | |
| 619 | if (finger[id].status == QT602240_RELEASE) |
| 620 | finger[id].status = 0; |
| 621 | else |
| 622 | finger_num++; |
| 623 | } |
| 624 | |
| 625 | input_report_key(input_dev, BTN_TOUCH, finger_num > 0); |
| 626 | |
| 627 | if (status != QT602240_RELEASE) { |
| 628 | input_report_abs(input_dev, ABS_X, finger[single_id].x); |
| 629 | input_report_abs(input_dev, ABS_Y, finger[single_id].y); |
| 630 | } |
| 631 | |
| 632 | input_sync(input_dev); |
| 633 | } |
| 634 | |
| 635 | static void qt602240_input_touchevent(struct qt602240_data *data, |
| 636 | struct qt602240_message *message, int id) |
| 637 | { |
| 638 | struct qt602240_finger *finger = data->finger; |
| 639 | struct device *dev = &data->client->dev; |
| 640 | u8 status = message->message[0]; |
| 641 | int x; |
| 642 | int y; |
| 643 | int area; |
| 644 | |
| 645 | /* Check the touch is present on the screen */ |
| 646 | if (!(status & QT602240_DETECT)) { |
| 647 | if (status & QT602240_RELEASE) { |
| 648 | dev_dbg(dev, "[%d] released\n", id); |
| 649 | |
| 650 | finger[id].status = QT602240_RELEASE; |
| 651 | qt602240_input_report(data, id); |
| 652 | } |
| 653 | return; |
| 654 | } |
| 655 | |
| 656 | /* Check only AMP detection */ |
| 657 | if (!(status & (QT602240_PRESS | QT602240_MOVE))) |
| 658 | return; |
| 659 | |
| 660 | x = (message->message[1] << 2) | ((message->message[3] & ~0x3f) >> 6); |
| 661 | y = (message->message[2] << 2) | ((message->message[3] & ~0xf3) >> 2); |
| 662 | area = message->message[4]; |
| 663 | |
| 664 | dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id, |
| 665 | status & QT602240_MOVE ? "moved" : "pressed", |
| 666 | x, y, area); |
| 667 | |
| 668 | finger[id].status = status & QT602240_MOVE ? |
| 669 | QT602240_MOVE : QT602240_PRESS; |
| 670 | finger[id].x = x; |
| 671 | finger[id].y = y; |
| 672 | finger[id].area = area; |
| 673 | |
| 674 | qt602240_input_report(data, id); |
| 675 | } |
| 676 | |
| 677 | static irqreturn_t qt602240_interrupt(int irq, void *dev_id) |
| 678 | { |
| 679 | struct qt602240_data *data = dev_id; |
| 680 | struct qt602240_message message; |
| 681 | struct qt602240_object *object; |
| 682 | struct device *dev = &data->client->dev; |
| 683 | int id; |
| 684 | u8 reportid; |
| 685 | u8 max_reportid; |
| 686 | u8 min_reportid; |
| 687 | |
| 688 | do { |
| 689 | if (qt602240_read_message(data, &message)) { |
| 690 | dev_err(dev, "Failed to read message\n"); |
| 691 | goto end; |
| 692 | } |
| 693 | |
| 694 | reportid = message.reportid; |
| 695 | |
| 696 | /* whether reportid is thing of QT602240_TOUCH_MULTI */ |
| 697 | object = qt602240_get_object(data, QT602240_TOUCH_MULTI); |
| 698 | if (!object) |
| 699 | goto end; |
| 700 | |
| 701 | max_reportid = object->max_reportid; |
| 702 | min_reportid = max_reportid - object->num_report_ids + 1; |
| 703 | id = reportid - min_reportid; |
| 704 | |
| 705 | if (reportid >= min_reportid && reportid <= max_reportid) |
| 706 | qt602240_input_touchevent(data, &message, id); |
| 707 | else |
| 708 | qt602240_dump_message(dev, &message); |
| 709 | } while (reportid != 0xff); |
| 710 | |
| 711 | end: |
| 712 | return IRQ_HANDLED; |
| 713 | } |
| 714 | |
| 715 | static int qt602240_check_reg_init(struct qt602240_data *data) |
| 716 | { |
| 717 | struct qt602240_object *object; |
| 718 | struct device *dev = &data->client->dev; |
| 719 | int index = 0; |
| 720 | int i, j; |
| 721 | u8 version = data->info.version; |
| 722 | u8 *init_vals; |
| 723 | |
| 724 | switch (version) { |
| 725 | case QT602240_VER_20: |
| 726 | init_vals = (u8 *)init_vals_ver_20; |
| 727 | break; |
| 728 | case QT602240_VER_21: |
| 729 | init_vals = (u8 *)init_vals_ver_21; |
| 730 | break; |
| 731 | case QT602240_VER_22: |
| 732 | init_vals = (u8 *)init_vals_ver_22; |
| 733 | break; |
| 734 | default: |
| 735 | dev_err(dev, "Firmware version %d doesn't support\n", version); |
| 736 | return -EINVAL; |
| 737 | } |
| 738 | |
| 739 | for (i = 0; i < data->info.object_num; i++) { |
| 740 | object = data->object_table + i; |
| 741 | |
| 742 | if (!qt602240_object_writable(object->type)) |
| 743 | continue; |
| 744 | |
| 745 | for (j = 0; j < object->size + 1; j++) |
| 746 | qt602240_write_object(data, object->type, j, |
| 747 | init_vals[index + j]); |
| 748 | |
| 749 | index += object->size + 1; |
| 750 | } |
| 751 | |
| 752 | return 0; |
| 753 | } |
| 754 | |
| 755 | static int qt602240_check_matrix_size(struct qt602240_data *data) |
| 756 | { |
| 757 | const struct qt602240_platform_data *pdata = data->pdata; |
| 758 | struct device *dev = &data->client->dev; |
| 759 | int mode = -1; |
| 760 | int error; |
| 761 | u8 val; |
| 762 | |
| 763 | dev_dbg(dev, "Number of X lines: %d\n", pdata->x_line); |
| 764 | dev_dbg(dev, "Number of Y lines: %d\n", pdata->y_line); |
| 765 | |
| 766 | switch (pdata->x_line) { |
| 767 | case 0 ... 15: |
| 768 | if (pdata->y_line <= 14) |
| 769 | mode = 0; |
| 770 | break; |
| 771 | case 16: |
| 772 | if (pdata->y_line <= 12) |
| 773 | mode = 1; |
| 774 | if (pdata->y_line == 13 || pdata->y_line == 14) |
| 775 | mode = 0; |
| 776 | break; |
| 777 | case 17: |
| 778 | if (pdata->y_line <= 11) |
| 779 | mode = 2; |
| 780 | if (pdata->y_line == 12 || pdata->y_line == 13) |
| 781 | mode = 1; |
| 782 | break; |
| 783 | case 18: |
| 784 | if (pdata->y_line <= 10) |
| 785 | mode = 3; |
| 786 | if (pdata->y_line == 11 || pdata->y_line == 12) |
| 787 | mode = 2; |
| 788 | break; |
| 789 | case 19: |
| 790 | if (pdata->y_line <= 9) |
| 791 | mode = 4; |
| 792 | if (pdata->y_line == 10 || pdata->y_line == 11) |
| 793 | mode = 3; |
| 794 | break; |
| 795 | case 20: |
| 796 | mode = 4; |
| 797 | } |
| 798 | |
| 799 | if (mode < 0) { |
| 800 | dev_err(dev, "Invalid X/Y lines\n"); |
| 801 | return -EINVAL; |
| 802 | } |
| 803 | |
| 804 | error = qt602240_read_object(data, QT602240_SPT_CTECONFIG, |
| 805 | QT602240_CTE_MODE, &val); |
| 806 | if (error) |
| 807 | return error; |
| 808 | |
| 809 | if (mode == val) |
| 810 | return 0; |
| 811 | |
| 812 | /* Change the CTE configuration */ |
| 813 | qt602240_write_object(data, QT602240_SPT_CTECONFIG, |
| 814 | QT602240_CTE_CTRL, 1); |
| 815 | qt602240_write_object(data, QT602240_SPT_CTECONFIG, |
| 816 | QT602240_CTE_MODE, mode); |
| 817 | qt602240_write_object(data, QT602240_SPT_CTECONFIG, |
| 818 | QT602240_CTE_CTRL, 0); |
| 819 | |
| 820 | return 0; |
| 821 | } |
| 822 | |
| 823 | static int qt602240_make_highchg(struct qt602240_data *data) |
| 824 | { |
| 825 | struct device *dev = &data->client->dev; |
| 826 | int count = 10; |
| 827 | int error; |
| 828 | u8 val; |
| 829 | |
| 830 | /* Read dummy message to make high CHG pin */ |
| 831 | do { |
| 832 | error = qt602240_read_object(data, QT602240_GEN_MESSAGE, 0, &val); |
| 833 | if (error) |
| 834 | return error; |
| 835 | } while ((val != 0xff) && --count); |
| 836 | |
| 837 | if (!count) { |
| 838 | dev_err(dev, "CHG pin isn't cleared\n"); |
| 839 | return -EBUSY; |
| 840 | } |
| 841 | |
| 842 | return 0; |
| 843 | } |
| 844 | |
| 845 | static void qt602240_handle_pdata(struct qt602240_data *data) |
| 846 | { |
| 847 | const struct qt602240_platform_data *pdata = data->pdata; |
| 848 | u8 voltage; |
| 849 | |
| 850 | /* Set touchscreen lines */ |
| 851 | qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_XSIZE, |
| 852 | pdata->x_line); |
| 853 | qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_YSIZE, |
| 854 | pdata->y_line); |
| 855 | |
| 856 | /* Set touchscreen orient */ |
| 857 | qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_ORIENT, |
| 858 | pdata->orient); |
| 859 | |
| 860 | /* Set touchscreen burst length */ |
| 861 | qt602240_write_object(data, QT602240_TOUCH_MULTI, |
| 862 | QT602240_TOUCH_BLEN, pdata->blen); |
| 863 | |
| 864 | /* Set touchscreen threshold */ |
| 865 | qt602240_write_object(data, QT602240_TOUCH_MULTI, |
| 866 | QT602240_TOUCH_TCHTHR, pdata->threshold); |
| 867 | |
| 868 | /* Set touchscreen resolution */ |
| 869 | qt602240_write_object(data, QT602240_TOUCH_MULTI, |
| 870 | QT602240_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff); |
| 871 | qt602240_write_object(data, QT602240_TOUCH_MULTI, |
| 872 | QT602240_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8); |
| 873 | qt602240_write_object(data, QT602240_TOUCH_MULTI, |
| 874 | QT602240_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff); |
| 875 | qt602240_write_object(data, QT602240_TOUCH_MULTI, |
| 876 | QT602240_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8); |
| 877 | |
| 878 | /* Set touchscreen voltage */ |
| 879 | if (data->info.version >= QT602240_VER_21 && pdata->voltage) { |
| 880 | if (pdata->voltage < QT602240_VOLTAGE_DEFAULT) { |
| 881 | voltage = (QT602240_VOLTAGE_DEFAULT - pdata->voltage) / |
| 882 | QT602240_VOLTAGE_STEP; |
| 883 | voltage = 0xff - voltage + 1; |
| 884 | } else |
| 885 | voltage = (pdata->voltage - QT602240_VOLTAGE_DEFAULT) / |
| 886 | QT602240_VOLTAGE_STEP; |
| 887 | |
| 888 | qt602240_write_object(data, QT602240_SPT_CTECONFIG, |
| 889 | QT602240_CTE_VOLTAGE, voltage); |
| 890 | } |
| 891 | } |
| 892 | |
| 893 | static int qt602240_get_info(struct qt602240_data *data) |
| 894 | { |
| 895 | struct i2c_client *client = data->client; |
| 896 | struct qt602240_info *info = &data->info; |
| 897 | int error; |
| 898 | u8 val; |
| 899 | |
| 900 | error = qt602240_read_reg(client, QT602240_FAMILY_ID, &val); |
| 901 | if (error) |
| 902 | return error; |
| 903 | info->family_id = val; |
| 904 | |
| 905 | error = qt602240_read_reg(client, QT602240_VARIANT_ID, &val); |
| 906 | if (error) |
| 907 | return error; |
| 908 | info->variant_id = val; |
| 909 | |
| 910 | error = qt602240_read_reg(client, QT602240_VERSION, &val); |
| 911 | if (error) |
| 912 | return error; |
| 913 | info->version = val; |
| 914 | |
| 915 | error = qt602240_read_reg(client, QT602240_BUILD, &val); |
| 916 | if (error) |
| 917 | return error; |
| 918 | info->build = val; |
| 919 | |
| 920 | error = qt602240_read_reg(client, QT602240_OBJECT_NUM, &val); |
| 921 | if (error) |
| 922 | return error; |
| 923 | info->object_num = val; |
| 924 | |
| 925 | return 0; |
| 926 | } |
| 927 | |
| 928 | static int qt602240_get_object_table(struct qt602240_data *data) |
| 929 | { |
| 930 | int error; |
| 931 | int i; |
| 932 | u16 reg; |
| 933 | u8 reportid = 0; |
| 934 | u8 buf[QT602240_OBJECT_SIZE]; |
| 935 | |
| 936 | for (i = 0; i < data->info.object_num; i++) { |
| 937 | struct qt602240_object *object = data->object_table + i; |
| 938 | |
| 939 | reg = QT602240_OBJECT_START + QT602240_OBJECT_SIZE * i; |
| 940 | error = qt602240_read_object_table(data->client, reg, buf); |
| 941 | if (error) |
| 942 | return error; |
| 943 | |
| 944 | object->type = buf[0]; |
| 945 | object->start_address = (buf[2] << 8) | buf[1]; |
| 946 | object->size = buf[3]; |
| 947 | object->instances = buf[4]; |
| 948 | object->num_report_ids = buf[5]; |
| 949 | |
| 950 | if (object->num_report_ids) { |
| 951 | reportid += object->num_report_ids * |
| 952 | (object->instances + 1); |
| 953 | object->max_reportid = reportid; |
| 954 | } |
| 955 | } |
| 956 | |
| 957 | return 0; |
| 958 | } |
| 959 | |
| 960 | static int qt602240_initialize(struct qt602240_data *data) |
| 961 | { |
| 962 | struct i2c_client *client = data->client; |
| 963 | struct qt602240_info *info = &data->info; |
| 964 | int error; |
| 965 | u8 val; |
| 966 | |
| 967 | error = qt602240_get_info(data); |
| 968 | if (error) |
| 969 | return error; |
| 970 | |
| 971 | data->object_table = kcalloc(info->object_num, |
Chris Leech | ce16a47 | 2010-11-17 23:59:54 -0800 | [diff] [blame] | 972 | sizeof(struct qt602240_object), |
Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 973 | GFP_KERNEL); |
| 974 | if (!data->object_table) { |
| 975 | dev_err(&client->dev, "Failed to allocate memory\n"); |
| 976 | return -ENOMEM; |
| 977 | } |
| 978 | |
| 979 | /* Get object table information */ |
| 980 | error = qt602240_get_object_table(data); |
| 981 | if (error) |
| 982 | return error; |
| 983 | |
| 984 | /* Check register init values */ |
| 985 | error = qt602240_check_reg_init(data); |
| 986 | if (error) |
| 987 | return error; |
| 988 | |
| 989 | /* Check X/Y matrix size */ |
| 990 | error = qt602240_check_matrix_size(data); |
| 991 | if (error) |
| 992 | return error; |
| 993 | |
| 994 | error = qt602240_make_highchg(data); |
| 995 | if (error) |
| 996 | return error; |
| 997 | |
| 998 | qt602240_handle_pdata(data); |
| 999 | |
| 1000 | /* Backup to memory */ |
| 1001 | qt602240_write_object(data, QT602240_GEN_COMMAND, |
| 1002 | QT602240_COMMAND_BACKUPNV, |
| 1003 | QT602240_BACKUP_VALUE); |
| 1004 | msleep(QT602240_BACKUP_TIME); |
| 1005 | |
| 1006 | /* Soft reset */ |
| 1007 | qt602240_write_object(data, QT602240_GEN_COMMAND, |
| 1008 | QT602240_COMMAND_RESET, 1); |
| 1009 | msleep(QT602240_RESET_TIME); |
| 1010 | |
| 1011 | /* Update matrix size at info struct */ |
| 1012 | error = qt602240_read_reg(client, QT602240_MATRIX_X_SIZE, &val); |
| 1013 | if (error) |
| 1014 | return error; |
| 1015 | info->matrix_xsize = val; |
| 1016 | |
| 1017 | error = qt602240_read_reg(client, QT602240_MATRIX_Y_SIZE, &val); |
| 1018 | if (error) |
| 1019 | return error; |
| 1020 | info->matrix_ysize = val; |
| 1021 | |
| 1022 | dev_info(&client->dev, |
| 1023 | "Family ID: %d Variant ID: %d Version: %d Build: %d\n", |
| 1024 | info->family_id, info->variant_id, info->version, |
| 1025 | info->build); |
| 1026 | |
| 1027 | dev_info(&client->dev, |
| 1028 | "Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n", |
| 1029 | info->matrix_xsize, info->matrix_ysize, |
| 1030 | info->object_num); |
| 1031 | |
| 1032 | return 0; |
| 1033 | } |
| 1034 | |
| 1035 | static ssize_t qt602240_object_show(struct device *dev, |
| 1036 | struct device_attribute *attr, char *buf) |
| 1037 | { |
| 1038 | struct qt602240_data *data = dev_get_drvdata(dev); |
| 1039 | struct qt602240_object *object; |
| 1040 | int count = 0; |
| 1041 | int i, j; |
| 1042 | int error; |
| 1043 | u8 val; |
| 1044 | |
| 1045 | for (i = 0; i < data->info.object_num; i++) { |
| 1046 | object = data->object_table + i; |
| 1047 | |
| 1048 | count += sprintf(buf + count, |
| 1049 | "Object Table Element %d(Type %d)\n", |
| 1050 | i + 1, object->type); |
| 1051 | |
| 1052 | if (!qt602240_object_readable(object->type)) { |
| 1053 | count += sprintf(buf + count, "\n"); |
| 1054 | continue; |
| 1055 | } |
| 1056 | |
| 1057 | for (j = 0; j < object->size + 1; j++) { |
| 1058 | error = qt602240_read_object(data, |
| 1059 | object->type, j, &val); |
| 1060 | if (error) |
| 1061 | return error; |
| 1062 | |
| 1063 | count += sprintf(buf + count, |
| 1064 | " Byte %d: 0x%x (%d)\n", j, val, val); |
| 1065 | } |
| 1066 | |
| 1067 | count += sprintf(buf + count, "\n"); |
| 1068 | } |
| 1069 | |
| 1070 | return count; |
| 1071 | } |
| 1072 | |
| 1073 | static int qt602240_load_fw(struct device *dev, const char *fn) |
| 1074 | { |
| 1075 | struct qt602240_data *data = dev_get_drvdata(dev); |
| 1076 | struct i2c_client *client = data->client; |
| 1077 | const struct firmware *fw = NULL; |
| 1078 | unsigned int frame_size; |
| 1079 | unsigned int pos = 0; |
| 1080 | int ret; |
| 1081 | |
| 1082 | ret = request_firmware(&fw, fn, dev); |
| 1083 | if (ret) { |
| 1084 | dev_err(dev, "Unable to open firmware %s\n", fn); |
| 1085 | return ret; |
| 1086 | } |
| 1087 | |
| 1088 | /* Change to the bootloader mode */ |
| 1089 | qt602240_write_object(data, QT602240_GEN_COMMAND, |
| 1090 | QT602240_COMMAND_RESET, QT602240_BOOT_VALUE); |
| 1091 | msleep(QT602240_RESET_TIME); |
| 1092 | |
| 1093 | /* Change to slave address of bootloader */ |
| 1094 | if (client->addr == QT602240_APP_LOW) |
| 1095 | client->addr = QT602240_BOOT_LOW; |
| 1096 | else |
| 1097 | client->addr = QT602240_BOOT_HIGH; |
| 1098 | |
| 1099 | ret = qt602240_check_bootloader(client, QT602240_WAITING_BOOTLOAD_CMD); |
| 1100 | if (ret) |
| 1101 | goto out; |
| 1102 | |
| 1103 | /* Unlock bootloader */ |
| 1104 | qt602240_unlock_bootloader(client); |
| 1105 | |
| 1106 | while (pos < fw->size) { |
| 1107 | ret = qt602240_check_bootloader(client, |
| 1108 | QT602240_WAITING_FRAME_DATA); |
| 1109 | if (ret) |
| 1110 | goto out; |
| 1111 | |
| 1112 | frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1)); |
| 1113 | |
| 1114 | /* We should add 2 at frame size as the the firmware data is not |
| 1115 | * included the CRC bytes. |
| 1116 | */ |
| 1117 | frame_size += 2; |
| 1118 | |
| 1119 | /* Write one frame to device */ |
| 1120 | qt602240_fw_write(client, fw->data + pos, frame_size); |
| 1121 | |
| 1122 | ret = qt602240_check_bootloader(client, |
| 1123 | QT602240_FRAME_CRC_PASS); |
| 1124 | if (ret) |
| 1125 | goto out; |
| 1126 | |
| 1127 | pos += frame_size; |
| 1128 | |
| 1129 | dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size); |
| 1130 | } |
| 1131 | |
| 1132 | out: |
| 1133 | release_firmware(fw); |
| 1134 | |
| 1135 | /* Change to slave address of application */ |
| 1136 | if (client->addr == QT602240_BOOT_LOW) |
| 1137 | client->addr = QT602240_APP_LOW; |
| 1138 | else |
| 1139 | client->addr = QT602240_APP_HIGH; |
| 1140 | |
| 1141 | return ret; |
| 1142 | } |
| 1143 | |
| 1144 | static ssize_t qt602240_update_fw_store(struct device *dev, |
| 1145 | struct device_attribute *attr, |
| 1146 | const char *buf, size_t count) |
| 1147 | { |
| 1148 | struct qt602240_data *data = dev_get_drvdata(dev); |
| 1149 | unsigned int version; |
| 1150 | int error; |
| 1151 | |
| 1152 | if (sscanf(buf, "%u", &version) != 1) { |
| 1153 | dev_err(dev, "Invalid values\n"); |
| 1154 | return -EINVAL; |
| 1155 | } |
| 1156 | |
| 1157 | if (data->info.version < QT602240_VER_21 || version < QT602240_VER_21) { |
| 1158 | dev_err(dev, "FW update supported starting with version 21\n"); |
| 1159 | return -EINVAL; |
| 1160 | } |
| 1161 | |
| 1162 | disable_irq(data->irq); |
| 1163 | |
| 1164 | error = qt602240_load_fw(dev, QT602240_FW_NAME); |
| 1165 | if (error) { |
| 1166 | dev_err(dev, "The firmware update failed(%d)\n", error); |
| 1167 | count = error; |
| 1168 | } else { |
| 1169 | dev_dbg(dev, "The firmware update succeeded\n"); |
| 1170 | |
| 1171 | /* Wait for reset */ |
| 1172 | msleep(QT602240_FWRESET_TIME); |
| 1173 | |
| 1174 | kfree(data->object_table); |
| 1175 | data->object_table = NULL; |
| 1176 | |
| 1177 | qt602240_initialize(data); |
| 1178 | } |
| 1179 | |
| 1180 | enable_irq(data->irq); |
| 1181 | |
| 1182 | return count; |
| 1183 | } |
| 1184 | |
| 1185 | static DEVICE_ATTR(object, 0444, qt602240_object_show, NULL); |
| 1186 | static DEVICE_ATTR(update_fw, 0664, NULL, qt602240_update_fw_store); |
| 1187 | |
| 1188 | static struct attribute *qt602240_attrs[] = { |
| 1189 | &dev_attr_object.attr, |
| 1190 | &dev_attr_update_fw.attr, |
| 1191 | NULL |
| 1192 | }; |
| 1193 | |
| 1194 | static const struct attribute_group qt602240_attr_group = { |
| 1195 | .attrs = qt602240_attrs, |
| 1196 | }; |
| 1197 | |
| 1198 | static void qt602240_start(struct qt602240_data *data) |
| 1199 | { |
| 1200 | /* Touch enable */ |
| 1201 | qt602240_write_object(data, |
| 1202 | QT602240_TOUCH_MULTI, QT602240_TOUCH_CTRL, 0x83); |
| 1203 | } |
| 1204 | |
| 1205 | static void qt602240_stop(struct qt602240_data *data) |
| 1206 | { |
| 1207 | /* Touch disable */ |
| 1208 | qt602240_write_object(data, |
| 1209 | QT602240_TOUCH_MULTI, QT602240_TOUCH_CTRL, 0); |
| 1210 | } |
| 1211 | |
| 1212 | static int qt602240_input_open(struct input_dev *dev) |
| 1213 | { |
| 1214 | struct qt602240_data *data = input_get_drvdata(dev); |
| 1215 | |
| 1216 | qt602240_start(data); |
| 1217 | |
| 1218 | return 0; |
| 1219 | } |
| 1220 | |
| 1221 | static void qt602240_input_close(struct input_dev *dev) |
| 1222 | { |
| 1223 | struct qt602240_data *data = input_get_drvdata(dev); |
| 1224 | |
| 1225 | qt602240_stop(data); |
| 1226 | } |
| 1227 | |
| 1228 | static int __devinit qt602240_probe(struct i2c_client *client, |
| 1229 | const struct i2c_device_id *id) |
| 1230 | { |
| 1231 | struct qt602240_data *data; |
| 1232 | struct input_dev *input_dev; |
| 1233 | int error; |
| 1234 | |
| 1235 | if (!client->dev.platform_data) |
| 1236 | return -EINVAL; |
| 1237 | |
| 1238 | data = kzalloc(sizeof(struct qt602240_data), GFP_KERNEL); |
| 1239 | input_dev = input_allocate_device(); |
| 1240 | if (!data || !input_dev) { |
| 1241 | dev_err(&client->dev, "Failed to allocate memory\n"); |
| 1242 | error = -ENOMEM; |
| 1243 | goto err_free_mem; |
| 1244 | } |
| 1245 | |
| 1246 | input_dev->name = "AT42QT602240/ATMXT224 Touchscreen"; |
| 1247 | input_dev->id.bustype = BUS_I2C; |
| 1248 | input_dev->dev.parent = &client->dev; |
| 1249 | input_dev->open = qt602240_input_open; |
| 1250 | input_dev->close = qt602240_input_close; |
| 1251 | |
| 1252 | __set_bit(EV_ABS, input_dev->evbit); |
| 1253 | __set_bit(EV_KEY, input_dev->evbit); |
| 1254 | __set_bit(BTN_TOUCH, input_dev->keybit); |
| 1255 | |
| 1256 | /* For single touch */ |
| 1257 | input_set_abs_params(input_dev, ABS_X, |
| 1258 | 0, QT602240_MAX_XC, 0, 0); |
| 1259 | input_set_abs_params(input_dev, ABS_Y, |
| 1260 | 0, QT602240_MAX_YC, 0, 0); |
| 1261 | |
| 1262 | /* For multi touch */ |
| 1263 | input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, |
| 1264 | 0, QT602240_MAX_AREA, 0, 0); |
| 1265 | input_set_abs_params(input_dev, ABS_MT_POSITION_X, |
| 1266 | 0, QT602240_MAX_XC, 0, 0); |
| 1267 | input_set_abs_params(input_dev, ABS_MT_POSITION_Y, |
| 1268 | 0, QT602240_MAX_YC, 0, 0); |
| 1269 | |
| 1270 | input_set_drvdata(input_dev, data); |
| 1271 | |
| 1272 | data->client = client; |
| 1273 | data->input_dev = input_dev; |
| 1274 | data->pdata = client->dev.platform_data; |
| 1275 | data->irq = client->irq; |
| 1276 | |
| 1277 | i2c_set_clientdata(client, data); |
| 1278 | |
| 1279 | error = qt602240_initialize(data); |
| 1280 | if (error) |
| 1281 | goto err_free_object; |
| 1282 | |
| 1283 | error = request_threaded_irq(client->irq, NULL, qt602240_interrupt, |
| 1284 | IRQF_TRIGGER_FALLING, client->dev.driver->name, data); |
| 1285 | if (error) { |
| 1286 | dev_err(&client->dev, "Failed to register interrupt\n"); |
| 1287 | goto err_free_object; |
| 1288 | } |
| 1289 | |
| 1290 | error = input_register_device(input_dev); |
| 1291 | if (error) |
| 1292 | goto err_free_irq; |
| 1293 | |
| 1294 | error = sysfs_create_group(&client->dev.kobj, &qt602240_attr_group); |
| 1295 | if (error) |
| 1296 | goto err_unregister_device; |
| 1297 | |
| 1298 | return 0; |
| 1299 | |
| 1300 | err_unregister_device: |
| 1301 | input_unregister_device(input_dev); |
| 1302 | input_dev = NULL; |
| 1303 | err_free_irq: |
| 1304 | free_irq(client->irq, data); |
| 1305 | err_free_object: |
| 1306 | kfree(data->object_table); |
| 1307 | err_free_mem: |
| 1308 | input_free_device(input_dev); |
| 1309 | kfree(data); |
| 1310 | return error; |
| 1311 | } |
| 1312 | |
| 1313 | static int __devexit qt602240_remove(struct i2c_client *client) |
| 1314 | { |
| 1315 | struct qt602240_data *data = i2c_get_clientdata(client); |
| 1316 | |
| 1317 | sysfs_remove_group(&client->dev.kobj, &qt602240_attr_group); |
| 1318 | free_irq(data->irq, data); |
| 1319 | input_unregister_device(data->input_dev); |
| 1320 | kfree(data->object_table); |
| 1321 | kfree(data); |
| 1322 | |
| 1323 | return 0; |
| 1324 | } |
| 1325 | |
| 1326 | #ifdef CONFIG_PM |
Dmitry Torokhov | 8b5fce0 | 2010-11-18 00:14:03 -0800 | [diff] [blame] | 1327 | static int qt602240_suspend(struct device *dev) |
Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 1328 | { |
Dmitry Torokhov | 8b5fce0 | 2010-11-18 00:14:03 -0800 | [diff] [blame] | 1329 | struct i2c_client *client = to_i2c_client(dev); |
Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 1330 | struct qt602240_data *data = i2c_get_clientdata(client); |
| 1331 | struct input_dev *input_dev = data->input_dev; |
| 1332 | |
| 1333 | mutex_lock(&input_dev->mutex); |
| 1334 | |
| 1335 | if (input_dev->users) |
| 1336 | qt602240_stop(data); |
| 1337 | |
| 1338 | mutex_unlock(&input_dev->mutex); |
| 1339 | |
| 1340 | return 0; |
| 1341 | } |
| 1342 | |
Dmitry Torokhov | 8b5fce0 | 2010-11-18 00:14:03 -0800 | [diff] [blame] | 1343 | static int qt602240_resume(struct device *dev) |
Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 1344 | { |
Dmitry Torokhov | 8b5fce0 | 2010-11-18 00:14:03 -0800 | [diff] [blame] | 1345 | struct i2c_client *client = to_i2c_client(dev); |
Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 1346 | struct qt602240_data *data = i2c_get_clientdata(client); |
| 1347 | struct input_dev *input_dev = data->input_dev; |
| 1348 | |
| 1349 | /* Soft reset */ |
| 1350 | qt602240_write_object(data, QT602240_GEN_COMMAND, |
| 1351 | QT602240_COMMAND_RESET, 1); |
| 1352 | |
| 1353 | msleep(QT602240_RESET_TIME); |
| 1354 | |
| 1355 | mutex_lock(&input_dev->mutex); |
| 1356 | |
| 1357 | if (input_dev->users) |
| 1358 | qt602240_start(data); |
| 1359 | |
| 1360 | mutex_unlock(&input_dev->mutex); |
| 1361 | |
| 1362 | return 0; |
| 1363 | } |
Dmitry Torokhov | 8b5fce0 | 2010-11-18 00:14:03 -0800 | [diff] [blame] | 1364 | |
| 1365 | static const struct dev_pm_ops qt602240_pm_ops = { |
| 1366 | .suspend = qt602240_suspend, |
| 1367 | .resume = qt602240_resume, |
| 1368 | }; |
Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 1369 | #endif |
| 1370 | |
| 1371 | static const struct i2c_device_id qt602240_id[] = { |
| 1372 | { "qt602240_ts", 0 }, |
| 1373 | { } |
| 1374 | }; |
| 1375 | MODULE_DEVICE_TABLE(i2c, qt602240_id); |
| 1376 | |
| 1377 | static struct i2c_driver qt602240_driver = { |
| 1378 | .driver = { |
| 1379 | .name = "qt602240_ts", |
| 1380 | .owner = THIS_MODULE, |
Dmitry Torokhov | 8b5fce0 | 2010-11-18 00:14:03 -0800 | [diff] [blame] | 1381 | #ifdef CONFIG_PM |
| 1382 | .pm = &qt602240_pm_ops, |
| 1383 | #endif |
Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 1384 | }, |
| 1385 | .probe = qt602240_probe, |
| 1386 | .remove = __devexit_p(qt602240_remove), |
Joonyoung Shim | 4cf51c3 | 2010-07-14 21:55:30 -0700 | [diff] [blame] | 1387 | .id_table = qt602240_id, |
| 1388 | }; |
| 1389 | |
| 1390 | static int __init qt602240_init(void) |
| 1391 | { |
| 1392 | return i2c_add_driver(&qt602240_driver); |
| 1393 | } |
| 1394 | |
| 1395 | static void __exit qt602240_exit(void) |
| 1396 | { |
| 1397 | i2c_del_driver(&qt602240_driver); |
| 1398 | } |
| 1399 | |
| 1400 | module_init(qt602240_init); |
| 1401 | module_exit(qt602240_exit); |
| 1402 | |
| 1403 | /* Module information */ |
| 1404 | MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); |
| 1405 | MODULE_DESCRIPTION("AT42QT602240/ATMXT224 Touchscreen driver"); |
| 1406 | MODULE_LICENSE("GPL"); |