blob: b11bf385d360485ba1d0b9ecbef4f3d33460a6ea [file] [log] [blame]
Felipe Balbi58a54912009-11-22 10:11:01 -08001/*
2 * linux/arch/arm/mach-omap2/usb-ehci.c
3 *
4 * This file will contain the board specific details for the
5 * Synopsys EHCI host controller on OMAP3430
6 *
7 * Copyright (C) 2007 Texas Instruments
8 * Author: Vikram Pandita <vikram.pandita@ti.com>
9 *
10 * Generalization by:
11 * Felipe Balbi <felipe.balbi@nokia.com>
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
16 */
17
18#include <linux/types.h>
19#include <linux/errno.h>
20#include <linux/delay.h>
21#include <linux/platform_device.h>
22#include <linux/clk.h>
Amit Kucheriabfb01192010-06-09 13:53:05 +030023#include <linux/dma-mapping.h>
24
Felipe Balbi58a54912009-11-22 10:11:01 -080025#include <asm/io.h>
Felipe Balbi58a54912009-11-22 10:11:01 -080026
27#include <mach/hardware.h>
28#include <mach/irqs.h>
29#include <plat/usb.h>
30
Tony Lindgren4896e392009-12-11 16:16:32 -080031#include "mux.h"
32
Felipe Balbi58a54912009-11-22 10:11:01 -080033#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
34
35static struct resource ehci_resources[] = {
36 {
37 .start = OMAP34XX_EHCI_BASE,
38 .end = OMAP34XX_EHCI_BASE + SZ_1K - 1,
39 .flags = IORESOURCE_MEM,
40 },
41 {
42 .start = OMAP34XX_UHH_CONFIG_BASE,
43 .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
44 .flags = IORESOURCE_MEM,
45 },
46 {
47 .start = OMAP34XX_USBTLL_BASE,
48 .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1,
49 .flags = IORESOURCE_MEM,
50 },
51 { /* general IRQ */
52 .start = INT_34XX_EHCI_IRQ,
53 .flags = IORESOURCE_IRQ,
54 }
55};
56
57static u64 ehci_dmamask = ~(u32)0;
58static struct platform_device ehci_device = {
59 .name = "ehci-omap",
60 .id = 0,
61 .dev = {
62 .dma_mask = &ehci_dmamask,
63 .coherent_dma_mask = 0xffffffff,
64 .platform_data = NULL,
65 },
66 .num_resources = ARRAY_SIZE(ehci_resources),
67 .resource = ehci_resources,
68};
69
70/* MUX settings for EHCI pins */
71/*
72 * setup_ehci_io_mux - initialize IO pad mux for USBHOST
73 */
Felipe Balbi6f69a182010-03-04 09:45:53 +020074static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
Felipe Balbi58a54912009-11-22 10:11:01 -080075{
76 switch (port_mode[0]) {
77 case EHCI_HCD_OMAP_MODE_PHY:
Tony Lindgren4896e392009-12-11 16:16:32 -080078 omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
79 omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
80 omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
81 omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
82 omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
83 omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
84 omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
85 omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
86 omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
87 omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
88 omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
89 omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
Felipe Balbi58a54912009-11-22 10:11:01 -080090 break;
91 case EHCI_HCD_OMAP_MODE_TLL:
Tony Lindgren4896e392009-12-11 16:16:32 -080092 omap_mux_init_signal("hsusb1_tll_stp",
93 OMAP_PIN_INPUT_PULLUP);
94 omap_mux_init_signal("hsusb1_tll_clk",
95 OMAP_PIN_INPUT_PULLDOWN);
96 omap_mux_init_signal("hsusb1_tll_dir",
97 OMAP_PIN_INPUT_PULLDOWN);
98 omap_mux_init_signal("hsusb1_tll_nxt",
99 OMAP_PIN_INPUT_PULLDOWN);
100 omap_mux_init_signal("hsusb1_tll_data0",
101 OMAP_PIN_INPUT_PULLDOWN);
102 omap_mux_init_signal("hsusb1_tll_data1",
103 OMAP_PIN_INPUT_PULLDOWN);
104 omap_mux_init_signal("hsusb1_tll_data2",
105 OMAP_PIN_INPUT_PULLDOWN);
106 omap_mux_init_signal("hsusb1_tll_data3",
107 OMAP_PIN_INPUT_PULLDOWN);
108 omap_mux_init_signal("hsusb1_tll_data4",
109 OMAP_PIN_INPUT_PULLDOWN);
110 omap_mux_init_signal("hsusb1_tll_data5",
111 OMAP_PIN_INPUT_PULLDOWN);
112 omap_mux_init_signal("hsusb1_tll_data6",
113 OMAP_PIN_INPUT_PULLDOWN);
114 omap_mux_init_signal("hsusb1_tll_data7",
115 OMAP_PIN_INPUT_PULLDOWN);
Felipe Balbi58a54912009-11-22 10:11:01 -0800116 break;
117 case EHCI_HCD_OMAP_MODE_UNKNOWN:
118 /* FALLTHROUGH */
119 default:
120 break;
121 }
122
123 switch (port_mode[1]) {
124 case EHCI_HCD_OMAP_MODE_PHY:
Tony Lindgren4896e392009-12-11 16:16:32 -0800125 omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
126 omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
127 omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
128 omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
129 omap_mux_init_signal("hsusb2_data0",
130 OMAP_PIN_INPUT_PULLDOWN);
131 omap_mux_init_signal("hsusb2_data1",
132 OMAP_PIN_INPUT_PULLDOWN);
133 omap_mux_init_signal("hsusb2_data2",
134 OMAP_PIN_INPUT_PULLDOWN);
135 omap_mux_init_signal("hsusb2_data3",
136 OMAP_PIN_INPUT_PULLDOWN);
137 omap_mux_init_signal("hsusb2_data4",
138 OMAP_PIN_INPUT_PULLDOWN);
139 omap_mux_init_signal("hsusb2_data5",
140 OMAP_PIN_INPUT_PULLDOWN);
141 omap_mux_init_signal("hsusb2_data6",
142 OMAP_PIN_INPUT_PULLDOWN);
143 omap_mux_init_signal("hsusb2_data7",
144 OMAP_PIN_INPUT_PULLDOWN);
Felipe Balbi58a54912009-11-22 10:11:01 -0800145 break;
146 case EHCI_HCD_OMAP_MODE_TLL:
Tony Lindgren4896e392009-12-11 16:16:32 -0800147 omap_mux_init_signal("hsusb2_tll_stp",
148 OMAP_PIN_INPUT_PULLUP);
149 omap_mux_init_signal("hsusb2_tll_clk",
150 OMAP_PIN_INPUT_PULLDOWN);
151 omap_mux_init_signal("hsusb2_tll_dir",
152 OMAP_PIN_INPUT_PULLDOWN);
153 omap_mux_init_signal("hsusb2_tll_nxt",
154 OMAP_PIN_INPUT_PULLDOWN);
155 omap_mux_init_signal("hsusb2_tll_data0",
156 OMAP_PIN_INPUT_PULLDOWN);
157 omap_mux_init_signal("hsusb2_tll_data1",
158 OMAP_PIN_INPUT_PULLDOWN);
159 omap_mux_init_signal("hsusb2_tll_data2",
160 OMAP_PIN_INPUT_PULLDOWN);
161 omap_mux_init_signal("hsusb2_tll_data3",
162 OMAP_PIN_INPUT_PULLDOWN);
163 omap_mux_init_signal("hsusb2_tll_data4",
164 OMAP_PIN_INPUT_PULLDOWN);
165 omap_mux_init_signal("hsusb2_tll_data5",
166 OMAP_PIN_INPUT_PULLDOWN);
167 omap_mux_init_signal("hsusb2_tll_data6",
168 OMAP_PIN_INPUT_PULLDOWN);
169 omap_mux_init_signal("hsusb2_tll_data7",
170 OMAP_PIN_INPUT_PULLDOWN);
Felipe Balbi58a54912009-11-22 10:11:01 -0800171 break;
172 case EHCI_HCD_OMAP_MODE_UNKNOWN:
173 /* FALLTHROUGH */
174 default:
175 break;
176 }
177
178 switch (port_mode[2]) {
179 case EHCI_HCD_OMAP_MODE_PHY:
180 printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
181 break;
182 case EHCI_HCD_OMAP_MODE_TLL:
Tony Lindgren4896e392009-12-11 16:16:32 -0800183 omap_mux_init_signal("hsusb3_tll_stp",
184 OMAP_PIN_INPUT_PULLUP);
185 omap_mux_init_signal("hsusb3_tll_clk",
186 OMAP_PIN_INPUT_PULLDOWN);
187 omap_mux_init_signal("hsusb3_tll_dir",
188 OMAP_PIN_INPUT_PULLDOWN);
189 omap_mux_init_signal("hsusb3_tll_nxt",
190 OMAP_PIN_INPUT_PULLDOWN);
191 omap_mux_init_signal("hsusb3_tll_data0",
192 OMAP_PIN_INPUT_PULLDOWN);
193 omap_mux_init_signal("hsusb3_tll_data1",
194 OMAP_PIN_INPUT_PULLDOWN);
195 omap_mux_init_signal("hsusb3_tll_data2",
196 OMAP_PIN_INPUT_PULLDOWN);
197 omap_mux_init_signal("hsusb3_tll_data3",
198 OMAP_PIN_INPUT_PULLDOWN);
199 omap_mux_init_signal("hsusb3_tll_data4",
200 OMAP_PIN_INPUT_PULLDOWN);
201 omap_mux_init_signal("hsusb3_tll_data5",
202 OMAP_PIN_INPUT_PULLDOWN);
203 omap_mux_init_signal("hsusb3_tll_data6",
204 OMAP_PIN_INPUT_PULLDOWN);
205 omap_mux_init_signal("hsusb3_tll_data7",
206 OMAP_PIN_INPUT_PULLDOWN);
Felipe Balbi58a54912009-11-22 10:11:01 -0800207 break;
208 case EHCI_HCD_OMAP_MODE_UNKNOWN:
209 /* FALLTHROUGH */
210 default:
211 break;
212 }
213
214 return;
215}
216
Felipe Balbi6f69a182010-03-04 09:45:53 +0200217void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
Felipe Balbi58a54912009-11-22 10:11:01 -0800218{
219 platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
220
221 /* Setup Pin IO MUX for EHCI */
222 if (cpu_is_omap34xx())
223 setup_ehci_io_mux(pdata->port_mode);
224
225 if (platform_device_register(&ehci_device) < 0) {
226 printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
227 return;
228 }
229}
230
231#else
232
Felipe Balbi6f69a182010-03-04 09:45:53 +0200233void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
Felipe Balbi58a54912009-11-22 10:11:01 -0800234
235{
236}
237
238#endif /* CONFIG_USB_EHCI_HCD */
239
Anand Gadiyar95344fc2010-05-10 21:56:10 +0530240#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
241
242static struct resource ohci_resources[] = {
243 {
244 .start = OMAP34XX_OHCI_BASE,
245 .end = OMAP34XX_OHCI_BASE + SZ_1K - 1,
246 .flags = IORESOURCE_MEM,
247 },
248 {
249 .start = OMAP34XX_UHH_CONFIG_BASE,
250 .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
251 .flags = IORESOURCE_MEM,
252 },
253 {
254 .start = OMAP34XX_USBTLL_BASE,
255 .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1,
256 .flags = IORESOURCE_MEM,
257 },
258 { /* general IRQ */
259 .start = INT_34XX_OHCI_IRQ,
260 .flags = IORESOURCE_IRQ,
261 }
262};
263
264static u64 ohci_dmamask = DMA_BIT_MASK(32);
265
266static struct platform_device ohci_device = {
267 .name = "ohci-omap3",
268 .id = 0,
269 .dev = {
270 .dma_mask = &ohci_dmamask,
271 .coherent_dma_mask = 0xffffffff,
272 },
273 .num_resources = ARRAY_SIZE(ohci_resources),
274 .resource = ohci_resources,
275};
276
277static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
278{
279 switch (port_mode[0]) {
280 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
281 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
282 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
283 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
284 omap_mux_init_signal("mm1_rxdp",
285 OMAP_PIN_INPUT_PULLDOWN);
286 omap_mux_init_signal("mm1_rxdm",
287 OMAP_PIN_INPUT_PULLDOWN);
288 /* FALLTHROUGH */
289 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
290 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
291 omap_mux_init_signal("mm1_rxrcv",
292 OMAP_PIN_INPUT_PULLDOWN);
293 /* FALLTHROUGH */
294 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
295 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
296 omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
297 /* FALLTHROUGH */
298 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
299 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
300 omap_mux_init_signal("mm1_txse0",
301 OMAP_PIN_INPUT_PULLDOWN);
302 omap_mux_init_signal("mm1_txdat",
303 OMAP_PIN_INPUT_PULLDOWN);
304 break;
305 case OMAP_OHCI_PORT_MODE_UNUSED:
306 /* FALLTHROUGH */
307 default:
308 break;
309 }
310 switch (port_mode[1]) {
311 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
312 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
313 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
314 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
315 omap_mux_init_signal("mm2_rxdp",
316 OMAP_PIN_INPUT_PULLDOWN);
317 omap_mux_init_signal("mm2_rxdm",
318 OMAP_PIN_INPUT_PULLDOWN);
319 /* FALLTHROUGH */
320 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
321 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
322 omap_mux_init_signal("mm2_rxrcv",
323 OMAP_PIN_INPUT_PULLDOWN);
324 /* FALLTHROUGH */
325 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
326 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
327 omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
328 /* FALLTHROUGH */
329 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
330 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
331 omap_mux_init_signal("mm2_txse0",
332 OMAP_PIN_INPUT_PULLDOWN);
333 omap_mux_init_signal("mm2_txdat",
334 OMAP_PIN_INPUT_PULLDOWN);
335 break;
336 case OMAP_OHCI_PORT_MODE_UNUSED:
337 /* FALLTHROUGH */
338 default:
339 break;
340 }
341 switch (port_mode[2]) {
342 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
343 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
344 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
345 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
346 omap_mux_init_signal("mm3_rxdp",
347 OMAP_PIN_INPUT_PULLDOWN);
348 omap_mux_init_signal("mm3_rxdm",
349 OMAP_PIN_INPUT_PULLDOWN);
350 /* FALLTHROUGH */
351 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
352 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
353 omap_mux_init_signal("mm3_rxrcv",
354 OMAP_PIN_INPUT_PULLDOWN);
355 /* FALLTHROUGH */
356 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
357 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
358 omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
359 /* FALLTHROUGH */
360 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
361 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
362 omap_mux_init_signal("mm3_txse0",
363 OMAP_PIN_INPUT_PULLDOWN);
364 omap_mux_init_signal("mm3_txdat",
365 OMAP_PIN_INPUT_PULLDOWN);
366 break;
367 case OMAP_OHCI_PORT_MODE_UNUSED:
368 /* FALLTHROUGH */
369 default:
370 break;
371 }
372}
373
374void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
375{
376 platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
377
378 /* Setup Pin IO MUX for OHCI */
379 if (cpu_is_omap34xx())
380 setup_ohci_io_mux(pdata->port_mode);
381
382 if (platform_device_register(&ohci_device) < 0) {
383 pr_err("Unable to register FS-USB (OHCI) device\n");
384 return;
385 }
386}
387
388#else
389
390void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
391{
392}
393
394#endif /* CONFIG_USB_OHCI_HCD */