blob: 401d73bd151f3a471d7be694531b0ae49837a00b [file] [log] [blame]
Johannes Berg704232c2007-04-23 12:20:05 -07001#ifndef __NET_CFG80211_H
2#define __NET_CFG80211_H
Johannes Bergd3236552009-04-20 14:31:42 +02003/*
4 * 802.11 device and configuration interface
5 *
Jouni Malinen026331c2010-02-15 12:53:10 +02006 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
Johannes Bergd3236552009-04-20 14:31:42 +02007 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
Johannes Berg704232c2007-04-23 12:20:05 -070012
Johannes Bergd3236552009-04-20 14:31:42 +020013#include <linux/netdevice.h>
14#include <linux/debugfs.h>
15#include <linux/list.h>
Johannes Berg704232c2007-04-23 12:20:05 -070016#include <linux/netlink.h>
17#include <linux/skbuff.h>
Johannes Berg55682962007-09-20 13:09:35 -040018#include <linux/nl80211.h>
Johannes Berg2a519312009-02-10 21:25:55 +010019#include <linux/if_ether.h>
20#include <linux/ieee80211.h>
Johannes Bergd3236552009-04-20 14:31:42 +020021#include <net/regulatory.h>
22
Johannes Bergfee52672008-11-26 22:36:31 +010023/* remove once we remove the wext stuff */
Johannes Bergd3236552009-04-20 14:31:42 +020024#include <net/iw_handler.h>
25#include <linux/wireless.h>
26
Johannes Berg704232c2007-04-23 12:20:05 -070027
Johannes Bergd70e9692010-08-19 16:11:27 +020028/**
29 * DOC: Introduction
30 *
31 * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
32 * userspace and drivers, and offers some utility functionality associated
33 * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
34 * by all modern wireless drivers in Linux, so that they offer a consistent
35 * API through nl80211. For backward compatibility, cfg80211 also offers
36 * wireless extensions to userspace, but hides them from drivers completely.
37 *
38 * Additionally, cfg80211 contains code to help enforce regulatory spectrum
39 * use restrictions.
40 */
41
42
43/**
44 * DOC: Device registration
45 *
46 * In order for a driver to use cfg80211, it must register the hardware device
47 * with cfg80211. This happens through a number of hardware capability structs
48 * described below.
49 *
50 * The fundamental structure for each device is the 'wiphy', of which each
51 * instance describes a physical wireless device connected to the system. Each
52 * such wiphy can have zero, one, or many virtual interfaces associated with
53 * it, which need to be identified as such by pointing the network interface's
54 * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
55 * the wireless part of the interface, normally this struct is embedded in the
56 * network interface's private data area. Drivers can optionally allow creating
57 * or destroying virtual interfaces on the fly, but without at least one or the
58 * ability to create some the wireless device isn't useful.
59 *
60 * Each wiphy structure contains device capability information, and also has
61 * a pointer to the various operations the driver offers. The definitions and
62 * structures here describe these capabilities in detail.
63 */
64
Johannes Berg704232c2007-04-23 12:20:05 -070065/*
Johannes Bergd3236552009-04-20 14:31:42 +020066 * wireless hardware capability structures
67 */
68
69/**
70 * enum ieee80211_band - supported frequency bands
Johannes Berg704232c2007-04-23 12:20:05 -070071 *
Johannes Bergd3236552009-04-20 14:31:42 +020072 * The bands are assigned this way because the supported
73 * bitrates differ in these bands.
74 *
75 * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
76 * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
Johannes Bergabe37c42010-06-07 11:12:27 +020077 * @IEEE80211_NUM_BANDS: number of defined bands
Johannes Bergd3236552009-04-20 14:31:42 +020078 */
79enum ieee80211_band {
Jouni Malinen13ae75b2009-12-29 12:59:45 +020080 IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
81 IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
Johannes Bergd3236552009-04-20 14:31:42 +020082
83 /* keep last */
84 IEEE80211_NUM_BANDS
85};
86
87/**
88 * enum ieee80211_channel_flags - channel flags
89 *
90 * Channel flags set by the regulatory control code.
91 *
92 * @IEEE80211_CHAN_DISABLED: This channel is disabled.
93 * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
94 * on this channel.
95 * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
96 * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
Luis R. Rodriguez689da1b2009-05-02 00:37:18 -040097 * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
Johannes Bergd3236552009-04-20 14:31:42 +020098 * is not permitted.
Luis R. Rodriguez689da1b2009-05-02 00:37:18 -040099 * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
Johannes Bergd3236552009-04-20 14:31:42 +0200100 * is not permitted.
101 */
102enum ieee80211_channel_flags {
103 IEEE80211_CHAN_DISABLED = 1<<0,
104 IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
105 IEEE80211_CHAN_NO_IBSS = 1<<2,
106 IEEE80211_CHAN_RADAR = 1<<3,
Luis R. Rodriguez689da1b2009-05-02 00:37:18 -0400107 IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
108 IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
Johannes Bergd3236552009-04-20 14:31:42 +0200109};
110
Luis R. Rodriguez038659e2009-05-02 00:37:17 -0400111#define IEEE80211_CHAN_NO_HT40 \
Luis R. Rodriguez689da1b2009-05-02 00:37:18 -0400112 (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
Luis R. Rodriguez038659e2009-05-02 00:37:17 -0400113
Johannes Bergd3236552009-04-20 14:31:42 +0200114/**
115 * struct ieee80211_channel - channel definition
116 *
117 * This structure describes a single channel for use
118 * with cfg80211.
119 *
120 * @center_freq: center frequency in MHz
Johannes Bergd3236552009-04-20 14:31:42 +0200121 * @hw_value: hardware-specific value for the channel
122 * @flags: channel flags from &enum ieee80211_channel_flags.
123 * @orig_flags: channel flags at registration time, used by regulatory
124 * code to support devices with additional restrictions
125 * @band: band this channel belongs to.
126 * @max_antenna_gain: maximum antenna gain in dBi
127 * @max_power: maximum transmission power (in dBm)
128 * @beacon_found: helper to regulatory code to indicate when a beacon
129 * has been found on this channel. Use regulatory_hint_found_beacon()
Walter Goldens77c20612010-05-18 04:44:54 -0700130 * to enable this, this is useful only on 5 GHz band.
Johannes Bergd3236552009-04-20 14:31:42 +0200131 * @orig_mag: internal use
132 * @orig_mpwr: internal use
133 */
134struct ieee80211_channel {
135 enum ieee80211_band band;
136 u16 center_freq;
Johannes Bergd3236552009-04-20 14:31:42 +0200137 u16 hw_value;
138 u32 flags;
139 int max_antenna_gain;
140 int max_power;
141 bool beacon_found;
142 u32 orig_flags;
143 int orig_mag, orig_mpwr;
144};
145
146/**
147 * enum ieee80211_rate_flags - rate flags
148 *
149 * Hardware/specification flags for rates. These are structured
150 * in a way that allows using the same bitrate structure for
151 * different bands/PHY modes.
152 *
153 * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
154 * preamble on this bitrate; only relevant in 2.4GHz band and
155 * with CCK rates.
156 * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
157 * when used with 802.11a (on the 5 GHz band); filled by the
158 * core code when registering the wiphy.
159 * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
160 * when used with 802.11b (on the 2.4 GHz band); filled by the
161 * core code when registering the wiphy.
162 * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
163 * when used with 802.11g (on the 2.4 GHz band); filled by the
164 * core code when registering the wiphy.
165 * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
166 */
167enum ieee80211_rate_flags {
168 IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
169 IEEE80211_RATE_MANDATORY_A = 1<<1,
170 IEEE80211_RATE_MANDATORY_B = 1<<2,
171 IEEE80211_RATE_MANDATORY_G = 1<<3,
172 IEEE80211_RATE_ERP_G = 1<<4,
173};
174
175/**
176 * struct ieee80211_rate - bitrate definition
177 *
178 * This structure describes a bitrate that an 802.11 PHY can
179 * operate with. The two values @hw_value and @hw_value_short
180 * are only for driver use when pointers to this structure are
181 * passed around.
182 *
183 * @flags: rate-specific flags
184 * @bitrate: bitrate in units of 100 Kbps
185 * @hw_value: driver/hardware value for this rate
186 * @hw_value_short: driver/hardware value for this rate when
187 * short preamble is used
188 */
189struct ieee80211_rate {
190 u32 flags;
191 u16 bitrate;
192 u16 hw_value, hw_value_short;
193};
194
195/**
196 * struct ieee80211_sta_ht_cap - STA's HT capabilities
197 *
198 * This structure describes most essential parameters needed
199 * to describe 802.11n HT capabilities for an STA.
200 *
201 * @ht_supported: is HT supported by the STA
202 * @cap: HT capabilities map as described in 802.11n spec
203 * @ampdu_factor: Maximum A-MPDU length factor
204 * @ampdu_density: Minimum A-MPDU spacing
205 * @mcs: Supported MCS rates
206 */
207struct ieee80211_sta_ht_cap {
208 u16 cap; /* use IEEE80211_HT_CAP_ */
209 bool ht_supported;
210 u8 ampdu_factor;
211 u8 ampdu_density;
212 struct ieee80211_mcs_info mcs;
213};
214
215/**
216 * struct ieee80211_supported_band - frequency band definition
217 *
218 * This structure describes a frequency band a wiphy
219 * is able to operate in.
220 *
221 * @channels: Array of channels the hardware can operate in
222 * in this band.
223 * @band: the band this structure represents
224 * @n_channels: Number of channels in @channels
225 * @bitrates: Array of bitrates the hardware can operate with
226 * in this band. Must be sorted to give a valid "supported
227 * rates" IE, i.e. CCK rates first, then OFDM.
228 * @n_bitrates: Number of bitrates in @bitrates
Johannes Bergabe37c42010-06-07 11:12:27 +0200229 * @ht_cap: HT capabilities in this band
Johannes Bergd3236552009-04-20 14:31:42 +0200230 */
231struct ieee80211_supported_band {
232 struct ieee80211_channel *channels;
233 struct ieee80211_rate *bitrates;
234 enum ieee80211_band band;
235 int n_channels;
236 int n_bitrates;
237 struct ieee80211_sta_ht_cap ht_cap;
238};
239
240/*
241 * Wireless hardware/device configuration structures and methods
Johannes Berg704232c2007-04-23 12:20:05 -0700242 */
243
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100244/**
Johannes Bergd70e9692010-08-19 16:11:27 +0200245 * DOC: Actions and configuration
246 *
247 * Each wireless device and each virtual interface offer a set of configuration
248 * operations and other actions that are invoked by userspace. Each of these
249 * actions is described in the operations structure, and the parameters these
250 * operations use are described separately.
251 *
252 * Additionally, some operations are asynchronous and expect to get status
253 * information via some functions that drivers need to call.
254 *
255 * Scanning and BSS list handling with its associated functionality is described
256 * in a separate chapter.
257 */
258
259/**
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100260 * struct vif_params - describes virtual interface parameters
Felix Fietkau8b787642009-11-10 18:53:10 +0100261 * @use_4addr: use 4-address frames
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100262 */
263struct vif_params {
Felix Fietkau8b787642009-11-10 18:53:10 +0100264 int use_4addr;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100265};
266
Andy Green179f8312007-07-10 19:29:38 +0200267/**
Johannes Berg41ade002007-12-19 02:03:29 +0100268 * struct key_params - key information
269 *
270 * Information about a key
271 *
272 * @key: key material
273 * @key_len: length of key material
274 * @cipher: cipher suite selector
275 * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
276 * with the get_key() callback, must be in little endian,
277 * length given by @seq_len.
Johannes Bergabe37c42010-06-07 11:12:27 +0200278 * @seq_len: length of @seq.
Johannes Berg41ade002007-12-19 02:03:29 +0100279 */
280struct key_params {
281 u8 *key;
282 u8 *seq;
283 int key_len;
284 int seq_len;
285 u32 cipher;
286};
287
Johannes Berged1b6cc2007-12-19 02:03:32 +0100288/**
Holger Schurig61fa7132009-11-11 12:25:40 +0100289 * enum survey_info_flags - survey information flags
290 *
Johannes Bergabe37c42010-06-07 11:12:27 +0200291 * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
Felix Fietkau17e5a802010-09-29 17:15:30 +0200292 * @SURVEY_INFO_IN_USE: channel is currently being used
Felix Fietkau8610c29a2010-10-09 02:39:29 +0200293 * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
294 * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
295 * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
296 * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
297 * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
Johannes Bergabe37c42010-06-07 11:12:27 +0200298 *
Holger Schurig61fa7132009-11-11 12:25:40 +0100299 * Used by the driver to indicate which info in &struct survey_info
300 * it has filled in during the get_survey().
301 */
302enum survey_info_flags {
303 SURVEY_INFO_NOISE_DBM = 1<<0,
Felix Fietkau17e5a802010-09-29 17:15:30 +0200304 SURVEY_INFO_IN_USE = 1<<1,
Felix Fietkau8610c29a2010-10-09 02:39:29 +0200305 SURVEY_INFO_CHANNEL_TIME = 1<<2,
306 SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
307 SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
308 SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
309 SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
Holger Schurig61fa7132009-11-11 12:25:40 +0100310};
311
312/**
313 * struct survey_info - channel survey response
314 *
Holger Schurig61fa7132009-11-11 12:25:40 +0100315 * @channel: the channel this survey record reports, mandatory
316 * @filled: bitflag of flags from &enum survey_info_flags
317 * @noise: channel noise in dBm. This and all following fields are
318 * optional
Felix Fietkau8610c29a2010-10-09 02:39:29 +0200319 * @channel_time: amount of time in ms the radio spent on the channel
320 * @channel_time_busy: amount of time the primary channel was sensed busy
321 * @channel_time_ext_busy: amount of time the extension channel was sensed busy
322 * @channel_time_rx: amount of time the radio spent receiving data
323 * @channel_time_tx: amount of time the radio spent transmitting data
Holger Schurig61fa7132009-11-11 12:25:40 +0100324 *
Johannes Bergabe37c42010-06-07 11:12:27 +0200325 * Used by dump_survey() to report back per-channel survey information.
326 *
Holger Schurig61fa7132009-11-11 12:25:40 +0100327 * This structure can later be expanded with things like
328 * channel duty cycle etc.
329 */
330struct survey_info {
331 struct ieee80211_channel *channel;
Felix Fietkau8610c29a2010-10-09 02:39:29 +0200332 u64 channel_time;
333 u64 channel_time_busy;
334 u64 channel_time_ext_busy;
335 u64 channel_time_rx;
336 u64 channel_time_tx;
Holger Schurig61fa7132009-11-11 12:25:40 +0100337 u32 filled;
338 s8 noise;
339};
340
341/**
Johannes Berged1b6cc2007-12-19 02:03:32 +0100342 * struct beacon_parameters - beacon parameters
343 *
344 * Used to configure the beacon for an interface.
345 *
346 * @head: head portion of beacon (before TIM IE)
347 * or %NULL if not changed
348 * @tail: tail portion of beacon (after TIM IE)
349 * or %NULL if not changed
350 * @interval: beacon interval or zero if not changed
351 * @dtim_period: DTIM period or zero if not changed
352 * @head_len: length of @head
353 * @tail_len: length of @tail
354 */
355struct beacon_parameters {
356 u8 *head, *tail;
357 int interval, dtim_period;
358 int head_len, tail_len;
359};
360
Johannes Berg5727ef12007-12-19 02:03:34 +0100361/**
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100362 * enum plink_action - actions to perform in mesh peers
363 *
364 * @PLINK_ACTION_INVALID: action 0 is reserved
365 * @PLINK_ACTION_OPEN: start mesh peer link establishment
Johannes Bergabe37c42010-06-07 11:12:27 +0200366 * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100367 */
368enum plink_actions {
369 PLINK_ACTION_INVALID,
370 PLINK_ACTION_OPEN,
371 PLINK_ACTION_BLOCK,
372};
373
374/**
Johannes Berg5727ef12007-12-19 02:03:34 +0100375 * struct station_parameters - station parameters
376 *
377 * Used to change and create a new station.
378 *
379 * @vlan: vlan interface station should belong to
380 * @supported_rates: supported rates in IEEE 802.11 format
381 * (or NULL for no change)
382 * @supported_rates_len: number of supported rates
Johannes Bergeccb8e82009-05-11 21:57:56 +0300383 * @sta_flags_mask: station flags that changed
384 * (bitmask of BIT(NL80211_STA_FLAG_...))
385 * @sta_flags_set: station flags values
386 * (bitmask of BIT(NL80211_STA_FLAG_...))
Johannes Berg5727ef12007-12-19 02:03:34 +0100387 * @listen_interval: listen interval or -1 for no change
388 * @aid: AID or zero for no change
Johannes Bergabe37c42010-06-07 11:12:27 +0200389 * @plink_action: plink action to take
Javier Cardona9c3990a2011-05-03 16:57:11 -0700390 * @plink_state: set the peer link state for a station
Johannes Bergabe37c42010-06-07 11:12:27 +0200391 * @ht_capa: HT capabilities of station
Johannes Berg5727ef12007-12-19 02:03:34 +0100392 */
393struct station_parameters {
394 u8 *supported_rates;
395 struct net_device *vlan;
Johannes Bergeccb8e82009-05-11 21:57:56 +0300396 u32 sta_flags_mask, sta_flags_set;
Johannes Berg5727ef12007-12-19 02:03:34 +0100397 int listen_interval;
398 u16 aid;
399 u8 supported_rates_len;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100400 u8 plink_action;
Javier Cardona9c3990a2011-05-03 16:57:11 -0700401 u8 plink_state;
Jouni Malinen36aedc92008-08-25 11:58:58 +0300402 struct ieee80211_ht_cap *ht_capa;
Johannes Berg5727ef12007-12-19 02:03:34 +0100403};
404
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100405/**
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100406 * enum station_info_flags - station information flags
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100407 *
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100408 * Used by the driver to indicate which info in &struct station_info
409 * it has filled in during get_station() or dump_station().
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100410 *
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100411 * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
412 * @STATION_INFO_RX_BYTES: @rx_bytes filled
413 * @STATION_INFO_TX_BYTES: @tx_bytes filled
414 * @STATION_INFO_LLID: @llid filled
415 * @STATION_INFO_PLID: @plid filled
416 * @STATION_INFO_PLINK_STATE: @plink_state filled
Henning Rogge420e7fa2008-12-11 22:04:19 +0100417 * @STATION_INFO_SIGNAL: @signal filled
Felix Fietkauc8dcfd82011-02-27 22:08:00 +0100418 * @STATION_INFO_TX_BITRATE: @txrate fields are filled
Henning Rogge420e7fa2008-12-11 22:04:19 +0100419 * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
Jouni Malinen98c8a60a2009-02-17 13:24:57 +0200420 * @STATION_INFO_RX_PACKETS: @rx_packets filled
421 * @STATION_INFO_TX_PACKETS: @tx_packets filled
Bruno Randolfb206b4e2010-10-06 18:34:12 +0900422 * @STATION_INFO_TX_RETRIES: @tx_retries filled
423 * @STATION_INFO_TX_FAILED: @tx_failed filled
Ben Greear5a5c7312010-10-07 16:39:20 -0700424 * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
Bruno Randolf541a45a2010-12-02 19:12:43 +0900425 * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
Felix Fietkauc8dcfd82011-02-27 22:08:00 +0100426 * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
Paul Stewartf4263c92011-03-31 09:25:41 -0700427 * @STATION_INFO_BSS_PARAM: @bss_param filled
Mohammed Shafi Shajakhanebe27c92011-04-08 21:24:24 +0530428 * @STATION_INFO_CONNECTED_TIME: @connected_time filled
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100429 */
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100430enum station_info_flags {
431 STATION_INFO_INACTIVE_TIME = 1<<0,
432 STATION_INFO_RX_BYTES = 1<<1,
433 STATION_INFO_TX_BYTES = 1<<2,
434 STATION_INFO_LLID = 1<<3,
435 STATION_INFO_PLID = 1<<4,
436 STATION_INFO_PLINK_STATE = 1<<5,
Henning Rogge420e7fa2008-12-11 22:04:19 +0100437 STATION_INFO_SIGNAL = 1<<6,
438 STATION_INFO_TX_BITRATE = 1<<7,
Jouni Malinen98c8a60a2009-02-17 13:24:57 +0200439 STATION_INFO_RX_PACKETS = 1<<8,
440 STATION_INFO_TX_PACKETS = 1<<9,
Bruno Randolfb206b4e2010-10-06 18:34:12 +0900441 STATION_INFO_TX_RETRIES = 1<<10,
442 STATION_INFO_TX_FAILED = 1<<11,
Ben Greear5a5c7312010-10-07 16:39:20 -0700443 STATION_INFO_RX_DROP_MISC = 1<<12,
Bruno Randolf541a45a2010-12-02 19:12:43 +0900444 STATION_INFO_SIGNAL_AVG = 1<<13,
Felix Fietkauc8dcfd82011-02-27 22:08:00 +0100445 STATION_INFO_RX_BITRATE = 1<<14,
Paul Stewartf4263c92011-03-31 09:25:41 -0700446 STATION_INFO_BSS_PARAM = 1<<15,
Mohammed Shafi Shajakhanebe27c92011-04-08 21:24:24 +0530447 STATION_INFO_CONNECTED_TIME = 1<<16
Henning Rogge420e7fa2008-12-11 22:04:19 +0100448};
449
450/**
451 * enum station_info_rate_flags - bitrate info flags
452 *
453 * Used by the driver to indicate the specific rate transmission
454 * type for 802.11n transmissions.
455 *
456 * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
457 * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
458 * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
459 */
460enum rate_info_flags {
461 RATE_INFO_FLAGS_MCS = 1<<0,
462 RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1,
463 RATE_INFO_FLAGS_SHORT_GI = 1<<2,
464};
465
466/**
467 * struct rate_info - bitrate information
468 *
469 * Information about a receiving or transmitting bitrate
470 *
471 * @flags: bitflag of flags from &enum rate_info_flags
472 * @mcs: mcs index if struct describes a 802.11n bitrate
473 * @legacy: bitrate in 100kbit/s for 802.11abg
474 */
475struct rate_info {
476 u8 flags;
477 u8 mcs;
478 u16 legacy;
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100479};
480
481/**
Paul Stewartf4263c92011-03-31 09:25:41 -0700482 * enum station_info_rate_flags - bitrate info flags
483 *
484 * Used by the driver to indicate the specific rate transmission
485 * type for 802.11n transmissions.
486 *
487 * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
488 * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
489 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
490 */
491enum bss_param_flags {
492 BSS_PARAM_FLAGS_CTS_PROT = 1<<0,
493 BSS_PARAM_FLAGS_SHORT_PREAMBLE = 1<<1,
494 BSS_PARAM_FLAGS_SHORT_SLOT_TIME = 1<<2,
495};
496
497/**
498 * struct sta_bss_parameters - BSS parameters for the attached station
499 *
500 * Information about the currently associated BSS
501 *
502 * @flags: bitflag of flags from &enum bss_param_flags
503 * @dtim_period: DTIM period for the BSS
504 * @beacon_interval: beacon interval
505 */
506struct sta_bss_parameters {
507 u8 flags;
508 u8 dtim_period;
509 u16 beacon_interval;
510};
511
512/**
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100513 * struct station_info - station information
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100514 *
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100515 * Station information filled by driver for get_station() and dump_station.
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100516 *
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100517 * @filled: bitflag of flags from &enum station_info_flags
Mohammed Shafi Shajakhanebe27c92011-04-08 21:24:24 +0530518 * @connected_time: time(in secs) since a station is last connected
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100519 * @inactive_time: time since last station activity (tx/rx) in milliseconds
520 * @rx_bytes: bytes received from this station
521 * @tx_bytes: bytes transmitted to this station
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100522 * @llid: mesh local link id
523 * @plid: mesh peer link id
524 * @plink_state: mesh peer link state
Henning Rogge420e7fa2008-12-11 22:04:19 +0100525 * @signal: signal strength of last received packet in dBm
Bruno Randolf541a45a2010-12-02 19:12:43 +0900526 * @signal_avg: signal strength average in dBm
Randy Dunlap858022a2011-03-18 09:33:02 -0700527 * @txrate: current unicast bitrate from this station
528 * @rxrate: current unicast bitrate to this station
Jouni Malinen98c8a60a2009-02-17 13:24:57 +0200529 * @rx_packets: packets received from this station
530 * @tx_packets: packets transmitted to this station
Bruno Randolfb206b4e2010-10-06 18:34:12 +0900531 * @tx_retries: cumulative retry counts
532 * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
Ben Greear5a5c7312010-10-07 16:39:20 -0700533 * @rx_dropped_misc: Dropped for un-specified reason.
Randy Dunlap1ba01452011-05-22 17:16:20 -0700534 * @bss_param: current BSS parameters
Johannes Bergf5ea9122009-08-07 16:17:38 +0200535 * @generation: generation number for nl80211 dumps.
536 * This number should increase every time the list of stations
537 * changes, i.e. when a station is added or removed, so that
538 * userspace can tell whether it got a consistent snapshot.
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100539 */
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100540struct station_info {
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100541 u32 filled;
Mohammed Shafi Shajakhanebe27c92011-04-08 21:24:24 +0530542 u32 connected_time;
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100543 u32 inactive_time;
544 u32 rx_bytes;
545 u32 tx_bytes;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100546 u16 llid;
547 u16 plid;
548 u8 plink_state;
Henning Rogge420e7fa2008-12-11 22:04:19 +0100549 s8 signal;
Bruno Randolf541a45a2010-12-02 19:12:43 +0900550 s8 signal_avg;
Henning Rogge420e7fa2008-12-11 22:04:19 +0100551 struct rate_info txrate;
Felix Fietkauc8dcfd82011-02-27 22:08:00 +0100552 struct rate_info rxrate;
Jouni Malinen98c8a60a2009-02-17 13:24:57 +0200553 u32 rx_packets;
554 u32 tx_packets;
Bruno Randolfb206b4e2010-10-06 18:34:12 +0900555 u32 tx_retries;
556 u32 tx_failed;
Ben Greear5a5c7312010-10-07 16:39:20 -0700557 u32 rx_dropped_misc;
Paul Stewartf4263c92011-03-31 09:25:41 -0700558 struct sta_bss_parameters bss_param;
Johannes Bergf5ea9122009-08-07 16:17:38 +0200559
560 int generation;
Johannes Bergfd5b74d2007-12-19 02:03:36 +0100561};
562
Michael Wu66f7ac52008-01-31 19:48:22 +0100563/**
564 * enum monitor_flags - monitor flags
565 *
566 * Monitor interface configuration flags. Note that these must be the bits
567 * according to the nl80211 flags.
568 *
569 * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
570 * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
571 * @MONITOR_FLAG_CONTROL: pass control frames
572 * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
573 * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
574 */
575enum monitor_flags {
576 MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL,
577 MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL,
578 MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL,
579 MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS,
580 MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
581};
582
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100583/**
584 * enum mpath_info_flags - mesh path information flags
585 *
586 * Used by the driver to indicate which info in &struct mpath_info it has filled
587 * in during get_station() or dump_station().
588 *
Johannes Bergabe37c42010-06-07 11:12:27 +0200589 * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
590 * @MPATH_INFO_SN: @sn filled
591 * @MPATH_INFO_METRIC: @metric filled
592 * @MPATH_INFO_EXPTIME: @exptime filled
593 * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
594 * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
595 * @MPATH_INFO_FLAGS: @flags filled
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100596 */
597enum mpath_info_flags {
598 MPATH_INFO_FRAME_QLEN = BIT(0),
Rui Paulod19b3bf2009-11-09 23:46:55 +0000599 MPATH_INFO_SN = BIT(1),
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100600 MPATH_INFO_METRIC = BIT(2),
601 MPATH_INFO_EXPTIME = BIT(3),
602 MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4),
603 MPATH_INFO_DISCOVERY_RETRIES = BIT(5),
604 MPATH_INFO_FLAGS = BIT(6),
605};
606
607/**
608 * struct mpath_info - mesh path information
609 *
610 * Mesh path information filled by driver for get_mpath() and dump_mpath().
611 *
612 * @filled: bitfield of flags from &enum mpath_info_flags
613 * @frame_qlen: number of queued frames for this destination
Rui Paulod19b3bf2009-11-09 23:46:55 +0000614 * @sn: target sequence number
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100615 * @metric: metric (cost) of this mesh path
616 * @exptime: expiration time for the mesh path from now, in msecs
617 * @flags: mesh path flags
618 * @discovery_timeout: total mesh path discovery timeout, in msecs
619 * @discovery_retries: mesh path discovery retries
Johannes Bergf5ea9122009-08-07 16:17:38 +0200620 * @generation: generation number for nl80211 dumps.
621 * This number should increase every time the list of mesh paths
622 * changes, i.e. when a station is added or removed, so that
623 * userspace can tell whether it got a consistent snapshot.
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100624 */
625struct mpath_info {
626 u32 filled;
627 u32 frame_qlen;
Rui Paulod19b3bf2009-11-09 23:46:55 +0000628 u32 sn;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100629 u32 metric;
630 u32 exptime;
631 u32 discovery_timeout;
632 u8 discovery_retries;
633 u8 flags;
Johannes Bergf5ea9122009-08-07 16:17:38 +0200634
635 int generation;
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100636};
637
Jouni Malinen9f1ba902008-08-07 20:07:01 +0300638/**
639 * struct bss_parameters - BSS parameters
640 *
641 * Used to change BSS parameters (mainly for AP mode).
642 *
643 * @use_cts_prot: Whether to use CTS protection
644 * (0 = no, 1 = yes, -1 = do not change)
645 * @use_short_preamble: Whether the use of short preambles is allowed
646 * (0 = no, 1 = yes, -1 = do not change)
647 * @use_short_slot_time: Whether the use of short slot time is allowed
648 * (0 = no, 1 = yes, -1 = do not change)
Jouni Malinen90c97a02008-10-30 16:59:22 +0200649 * @basic_rates: basic rates in IEEE 802.11 format
650 * (or NULL for no change)
651 * @basic_rates_len: number of basic rates
Felix Fietkaufd8aaaf2010-04-27 01:23:35 +0200652 * @ap_isolate: do not forward packets between connected stations
Helmut Schaa50b12f52010-11-19 12:40:25 +0100653 * @ht_opmode: HT Operation mode
654 * (u16 = opmode, -1 = do not change)
Jouni Malinen9f1ba902008-08-07 20:07:01 +0300655 */
656struct bss_parameters {
657 int use_cts_prot;
658 int use_short_preamble;
659 int use_short_slot_time;
Jouni Malinen90c97a02008-10-30 16:59:22 +0200660 u8 *basic_rates;
661 u8 basic_rates_len;
Felix Fietkaufd8aaaf2010-04-27 01:23:35 +0200662 int ap_isolate;
Helmut Schaa50b12f52010-11-19 12:40:25 +0100663 int ht_opmode;
Jouni Malinen9f1ba902008-08-07 20:07:01 +0300664};
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +0100665
Johannes Berg29cbe682010-12-03 09:20:44 +0100666/*
667 * struct mesh_config - 802.11s mesh configuration
668 *
669 * These parameters can be changed while the mesh is active.
670 */
colin@cozybit.com93da9cc2008-10-21 12:03:48 -0700671struct mesh_config {
672 /* Timeouts in ms */
673 /* Mesh plink management parameters */
674 u16 dot11MeshRetryTimeout;
675 u16 dot11MeshConfirmTimeout;
676 u16 dot11MeshHoldingTimeout;
677 u16 dot11MeshMaxPeerLinks;
678 u8 dot11MeshMaxRetries;
679 u8 dot11MeshTTL;
Javier Cardona45904f22010-12-03 09:20:40 +0100680 /* ttl used in path selection information elements */
681 u8 element_ttl;
colin@cozybit.com93da9cc2008-10-21 12:03:48 -0700682 bool auto_open_plinks;
683 /* HWMP parameters */
684 u8 dot11MeshHWMPmaxPREQretries;
685 u32 path_refresh_time;
686 u16 min_discovery_timeout;
687 u32 dot11MeshHWMPactivePathTimeout;
688 u16 dot11MeshHWMPpreqMinInterval;
689 u16 dot11MeshHWMPnetDiameterTraversalTime;
Rui Paulo63c57232009-11-09 23:46:57 +0000690 u8 dot11MeshHWMPRootMode;
colin@cozybit.com93da9cc2008-10-21 12:03:48 -0700691};
692
Jouni Malinen31888482008-10-30 16:59:24 +0200693/**
Johannes Berg29cbe682010-12-03 09:20:44 +0100694 * struct mesh_setup - 802.11s mesh setup configuration
695 * @mesh_id: the mesh ID
696 * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
Javier Cardonac80d5452010-12-16 17:37:49 -0800697 * @path_sel_proto: which path selection protocol to use
698 * @path_metric: which metric to use
Javier Cardona581a8b02011-04-07 15:08:27 -0700699 * @ie: vendor information elements (optional)
700 * @ie_len: length of vendor information elements
Javier Cardonab130e5c2011-05-03 16:57:07 -0700701 * @is_authenticated: this mesh requires authentication
702 * @is_secure: this mesh uses security
Johannes Berg29cbe682010-12-03 09:20:44 +0100703 *
704 * These parameters are fixed when the mesh is created.
705 */
706struct mesh_setup {
707 const u8 *mesh_id;
708 u8 mesh_id_len;
Javier Cardonac80d5452010-12-16 17:37:49 -0800709 u8 path_sel_proto;
710 u8 path_metric;
Javier Cardona581a8b02011-04-07 15:08:27 -0700711 const u8 *ie;
712 u8 ie_len;
Javier Cardonab130e5c2011-05-03 16:57:07 -0700713 bool is_authenticated;
Javier Cardona15d5dda2011-04-07 15:08:28 -0700714 bool is_secure;
Johannes Berg29cbe682010-12-03 09:20:44 +0100715};
716
717/**
Jouni Malinen31888482008-10-30 16:59:24 +0200718 * struct ieee80211_txq_params - TX queue parameters
719 * @queue: TX queue identifier (NL80211_TXQ_Q_*)
720 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
721 * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
722 * 1..32767]
723 * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
724 * 1..32767]
725 * @aifs: Arbitration interframe space [0..255]
726 */
727struct ieee80211_txq_params {
728 enum nl80211_txq_q queue;
729 u16 txop;
730 u16 cwmin;
731 u16 cwmax;
732 u8 aifs;
733};
734
Johannes Berg704232c2007-04-23 12:20:05 -0700735/* from net/wireless.h */
736struct wiphy;
737
Johannes Bergd70e9692010-08-19 16:11:27 +0200738/**
739 * DOC: Scanning and BSS list handling
740 *
741 * The scanning process itself is fairly simple, but cfg80211 offers quite
742 * a bit of helper functionality. To start a scan, the scan operation will
743 * be invoked with a scan definition. This scan definition contains the
744 * channels to scan, and the SSIDs to send probe requests for (including the
745 * wildcard, if desired). A passive scan is indicated by having no SSIDs to
746 * probe. Additionally, a scan request may contain extra information elements
747 * that should be added to the probe request. The IEs are guaranteed to be
748 * well-formed, and will not exceed the maximum length the driver advertised
749 * in the wiphy structure.
750 *
751 * When scanning finds a BSS, cfg80211 needs to be notified of that, because
752 * it is responsible for maintaining the BSS list; the driver should not
753 * maintain a list itself. For this notification, various functions exist.
754 *
755 * Since drivers do not maintain a BSS list, there are also a number of
756 * functions to search for a BSS and obtain information about it from the
757 * BSS structure cfg80211 maintains. The BSS list is also made available
758 * to userspace.
759 */
Jouni Malinen72bdcf32008-11-26 16:15:24 +0200760
Johannes Berg704232c2007-04-23 12:20:05 -0700761/**
Johannes Berg2a519312009-02-10 21:25:55 +0100762 * struct cfg80211_ssid - SSID description
763 * @ssid: the SSID
764 * @ssid_len: length of the ssid
765 */
766struct cfg80211_ssid {
767 u8 ssid[IEEE80211_MAX_SSID_LEN];
768 u8 ssid_len;
769};
770
771/**
772 * struct cfg80211_scan_request - scan request description
773 *
774 * @ssids: SSIDs to scan for (active scan only)
775 * @n_ssids: number of SSIDs
776 * @channels: channels to scan on.
Helmut Schaaca3dbc22009-07-10 14:54:58 +0200777 * @n_channels: total number of channels to scan
Jouni Malinen70692ad2009-02-16 19:39:13 +0200778 * @ie: optional information element(s) to add into Probe Request or %NULL
779 * @ie_len: length of ie in octets
Johannes Berg34850ab2011-07-18 18:08:35 +0200780 * @rates: bitmap of rates to advertise for each band
Johannes Berg2a519312009-02-10 21:25:55 +0100781 * @wiphy: the wiphy this was for
Johannes Berg463d0182009-07-14 00:33:35 +0200782 * @dev: the interface
Johannes Bergabe37c42010-06-07 11:12:27 +0200783 * @aborted: (internal) scan request was notified as aborted
Johannes Berg2a519312009-02-10 21:25:55 +0100784 */
785struct cfg80211_scan_request {
786 struct cfg80211_ssid *ssids;
787 int n_ssids;
Johannes Berg2a519312009-02-10 21:25:55 +0100788 u32 n_channels;
Johannes Bergde95a542009-04-01 11:58:36 +0200789 const u8 *ie;
Jouni Malinen70692ad2009-02-16 19:39:13 +0200790 size_t ie_len;
Johannes Berg2a519312009-02-10 21:25:55 +0100791
Johannes Berg34850ab2011-07-18 18:08:35 +0200792 u32 rates[IEEE80211_NUM_BANDS];
793
Johannes Berg2a519312009-02-10 21:25:55 +0100794 /* internal */
795 struct wiphy *wiphy;
Johannes Berg463d0182009-07-14 00:33:35 +0200796 struct net_device *dev;
Johannes Berg667503d2009-07-07 03:56:11 +0200797 bool aborted;
Johannes Berg5ba63532009-08-07 17:54:07 +0200798
799 /* keep last */
800 struct ieee80211_channel *channels[0];
Johannes Berg2a519312009-02-10 21:25:55 +0100801};
802
803/**
Luciano Coelho807f8a82011-05-11 17:09:35 +0300804 * struct cfg80211_sched_scan_request - scheduled scan request description
805 *
806 * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
807 * @n_ssids: number of SSIDs
808 * @n_channels: total number of channels to scan
Luciano Coelhobbe6ad62011-05-11 17:09:37 +0300809 * @interval: interval between each scheduled scan cycle
Luciano Coelho807f8a82011-05-11 17:09:35 +0300810 * @ie: optional information element(s) to add into Probe Request or %NULL
811 * @ie_len: length of ie in octets
812 * @wiphy: the wiphy this was for
813 * @dev: the interface
814 * @channels: channels to scan
815 */
816struct cfg80211_sched_scan_request {
817 struct cfg80211_ssid *ssids;
818 int n_ssids;
819 u32 n_channels;
Luciano Coelhobbe6ad62011-05-11 17:09:37 +0300820 u32 interval;
Luciano Coelho807f8a82011-05-11 17:09:35 +0300821 const u8 *ie;
822 size_t ie_len;
823
824 /* internal */
825 struct wiphy *wiphy;
826 struct net_device *dev;
827
828 /* keep last */
829 struct ieee80211_channel *channels[0];
830};
831
832/**
Johannes Berg2a519312009-02-10 21:25:55 +0100833 * enum cfg80211_signal_type - signal type
834 *
835 * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
836 * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
837 * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
838 */
839enum cfg80211_signal_type {
840 CFG80211_SIGNAL_TYPE_NONE,
841 CFG80211_SIGNAL_TYPE_MBM,
842 CFG80211_SIGNAL_TYPE_UNSPEC,
843};
844
845/**
846 * struct cfg80211_bss - BSS description
847 *
848 * This structure describes a BSS (which may also be a mesh network)
849 * for use in scan results and similar.
850 *
Johannes Bergabe37c42010-06-07 11:12:27 +0200851 * @channel: channel this BSS is on
Johannes Berg2a519312009-02-10 21:25:55 +0100852 * @bssid: BSSID of the BSS
853 * @tsf: timestamp of last received update
854 * @beacon_interval: the beacon interval as from the frame
855 * @capability: the capability field in host byte order
856 * @information_elements: the information elements (Note that there
Jouni Malinen34a6edd2010-01-06 16:19:24 +0200857 * is no guarantee that these are well-formed!); this is a pointer to
858 * either the beacon_ies or proberesp_ies depending on whether Probe
859 * Response frame has been received
Johannes Berg2a519312009-02-10 21:25:55 +0100860 * @len_information_elements: total length of the information elements
Jouni Malinen34a6edd2010-01-06 16:19:24 +0200861 * @beacon_ies: the information elements from the last Beacon frame
862 * @len_beacon_ies: total length of the beacon_ies
863 * @proberesp_ies: the information elements from the last Probe Response frame
864 * @len_proberesp_ies: total length of the proberesp_ies
Johannes Berg77965c92009-02-18 18:45:06 +0100865 * @signal: signal strength value (type depends on the wiphy's signal_type)
Johannes Berg78c1c7e2009-02-10 21:25:57 +0100866 * @free_priv: function pointer to free private data
Johannes Berg2a519312009-02-10 21:25:55 +0100867 * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
868 */
869struct cfg80211_bss {
870 struct ieee80211_channel *channel;
871
872 u8 bssid[ETH_ALEN];
873 u64 tsf;
874 u16 beacon_interval;
875 u16 capability;
876 u8 *information_elements;
877 size_t len_information_elements;
Jouni Malinen34a6edd2010-01-06 16:19:24 +0200878 u8 *beacon_ies;
879 size_t len_beacon_ies;
880 u8 *proberesp_ies;
881 size_t len_proberesp_ies;
Johannes Berg2a519312009-02-10 21:25:55 +0100882
883 s32 signal;
Johannes Berg2a519312009-02-10 21:25:55 +0100884
Johannes Berg78c1c7e2009-02-10 21:25:57 +0100885 void (*free_priv)(struct cfg80211_bss *bss);
Johannes Berg2a519312009-02-10 21:25:55 +0100886 u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
887};
888
889/**
Johannes Berg517357c2009-07-02 17:18:40 +0200890 * ieee80211_bss_get_ie - find IE with given ID
891 * @bss: the bss to search
892 * @ie: the IE ID
893 * Returns %NULL if not found.
894 */
895const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
896
897
898/**
Samuel Ortizb23aa672009-07-01 21:26:54 +0200899 * struct cfg80211_crypto_settings - Crypto settings
900 * @wpa_versions: indicates which, if any, WPA versions are enabled
901 * (from enum nl80211_wpa_versions)
902 * @cipher_group: group key cipher suite (or 0 if unset)
903 * @n_ciphers_pairwise: number of AP supported unicast ciphers
904 * @ciphers_pairwise: unicast key cipher suites
905 * @n_akm_suites: number of AKM suites
906 * @akm_suites: AKM suites
907 * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
908 * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
909 * required to assume that the port is unauthorized until authorized by
910 * user space. Otherwise, port is marked authorized by default.
Johannes Bergc0692b82010-08-27 14:26:53 +0300911 * @control_port_ethertype: the control port protocol that should be
912 * allowed through even on unauthorized ports
913 * @control_port_no_encrypt: TRUE to prevent encryption of control port
914 * protocol frames.
Samuel Ortizb23aa672009-07-01 21:26:54 +0200915 */
916struct cfg80211_crypto_settings {
917 u32 wpa_versions;
918 u32 cipher_group;
919 int n_ciphers_pairwise;
920 u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
921 int n_akm_suites;
922 u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
923 bool control_port;
Johannes Bergc0692b82010-08-27 14:26:53 +0300924 __be16 control_port_ethertype;
925 bool control_port_no_encrypt;
Samuel Ortizb23aa672009-07-01 21:26:54 +0200926};
927
928/**
Jouni Malinen636a5d32009-03-19 13:39:22 +0200929 * struct cfg80211_auth_request - Authentication request data
930 *
931 * This structure provides information needed to complete IEEE 802.11
932 * authentication.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200933 *
Johannes Berg19957bb2009-07-02 17:20:43 +0200934 * @bss: The BSS to authenticate with.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200935 * @auth_type: Authentication type (algorithm)
936 * @ie: Extra IEs to add to Authentication frame or %NULL
937 * @ie_len: Length of ie buffer in octets
Johannes Bergfffd0932009-07-08 14:22:54 +0200938 * @key_len: length of WEP key for shared key authentication
939 * @key_idx: index of WEP key for shared key authentication
940 * @key: WEP key for shared key authentication
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300941 * @local_state_change: This is a request for a local state only, i.e., no
942 * Authentication frame is to be transmitted and authentication state is
943 * to be changed without having to wait for a response from the peer STA
944 * (AP).
Jouni Malinen636a5d32009-03-19 13:39:22 +0200945 */
946struct cfg80211_auth_request {
Johannes Berg19957bb2009-07-02 17:20:43 +0200947 struct cfg80211_bss *bss;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200948 const u8 *ie;
949 size_t ie_len;
Johannes Berg19957bb2009-07-02 17:20:43 +0200950 enum nl80211_auth_type auth_type;
Johannes Bergfffd0932009-07-08 14:22:54 +0200951 const u8 *key;
952 u8 key_len, key_idx;
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300953 bool local_state_change;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200954};
955
956/**
957 * struct cfg80211_assoc_request - (Re)Association request data
958 *
959 * This structure provides information needed to complete IEEE 802.11
960 * (re)association.
Johannes Berg19957bb2009-07-02 17:20:43 +0200961 * @bss: The BSS to associate with.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200962 * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
963 * @ie_len: Length of ie buffer in octets
Jouni Malinendc6382c2009-05-06 22:09:37 +0300964 * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
Samuel Ortizb23aa672009-07-01 21:26:54 +0200965 * @crypto: crypto settings
Johannes Berg3e5d7642009-07-07 14:37:26 +0200966 * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
Jouni Malinen636a5d32009-03-19 13:39:22 +0200967 */
968struct cfg80211_assoc_request {
Johannes Berg19957bb2009-07-02 17:20:43 +0200969 struct cfg80211_bss *bss;
Johannes Berg3e5d7642009-07-07 14:37:26 +0200970 const u8 *ie, *prev_bssid;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200971 size_t ie_len;
Samuel Ortizb23aa672009-07-01 21:26:54 +0200972 struct cfg80211_crypto_settings crypto;
Johannes Berg19957bb2009-07-02 17:20:43 +0200973 bool use_mfp;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200974};
975
976/**
977 * struct cfg80211_deauth_request - Deauthentication request data
978 *
979 * This structure provides information needed to complete IEEE 802.11
980 * deauthentication.
981 *
Johannes Berg19957bb2009-07-02 17:20:43 +0200982 * @bss: the BSS to deauthenticate from
Jouni Malinen636a5d32009-03-19 13:39:22 +0200983 * @ie: Extra IEs to add to Deauthentication frame or %NULL
984 * @ie_len: Length of ie buffer in octets
Johannes Berg19957bb2009-07-02 17:20:43 +0200985 * @reason_code: The reason code for the deauthentication
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300986 * @local_state_change: This is a request for a local state only, i.e., no
987 * Deauthentication frame is to be transmitted.
Jouni Malinen636a5d32009-03-19 13:39:22 +0200988 */
989struct cfg80211_deauth_request {
Johannes Berg19957bb2009-07-02 17:20:43 +0200990 struct cfg80211_bss *bss;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200991 const u8 *ie;
992 size_t ie_len;
Johannes Berg19957bb2009-07-02 17:20:43 +0200993 u16 reason_code;
Jouni Malinend5cdfac2010-04-04 09:37:19 +0300994 bool local_state_change;
Jouni Malinen636a5d32009-03-19 13:39:22 +0200995};
996
997/**
998 * struct cfg80211_disassoc_request - Disassociation request data
999 *
1000 * This structure provides information needed to complete IEEE 802.11
1001 * disassocation.
1002 *
Johannes Berg19957bb2009-07-02 17:20:43 +02001003 * @bss: the BSS to disassociate from
Jouni Malinen636a5d32009-03-19 13:39:22 +02001004 * @ie: Extra IEs to add to Disassociation frame or %NULL
1005 * @ie_len: Length of ie buffer in octets
Johannes Berg19957bb2009-07-02 17:20:43 +02001006 * @reason_code: The reason code for the disassociation
Jouni Malinend5cdfac2010-04-04 09:37:19 +03001007 * @local_state_change: This is a request for a local state only, i.e., no
1008 * Disassociation frame is to be transmitted.
Jouni Malinen636a5d32009-03-19 13:39:22 +02001009 */
1010struct cfg80211_disassoc_request {
Johannes Berg19957bb2009-07-02 17:20:43 +02001011 struct cfg80211_bss *bss;
Jouni Malinen636a5d32009-03-19 13:39:22 +02001012 const u8 *ie;
1013 size_t ie_len;
Johannes Berg19957bb2009-07-02 17:20:43 +02001014 u16 reason_code;
Jouni Malinend5cdfac2010-04-04 09:37:19 +03001015 bool local_state_change;
Jouni Malinen636a5d32009-03-19 13:39:22 +02001016};
1017
1018/**
Johannes Berg04a773a2009-04-19 21:24:32 +02001019 * struct cfg80211_ibss_params - IBSS parameters
1020 *
1021 * This structure defines the IBSS parameters for the join_ibss()
1022 * method.
1023 *
1024 * @ssid: The SSID, will always be non-null.
1025 * @ssid_len: The length of the SSID, will always be non-zero.
1026 * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
1027 * search for IBSSs with a different BSSID.
1028 * @channel: The channel to use if no IBSS can be found to join.
1029 * @channel_fixed: The channel should be fixed -- do not search for
1030 * IBSSs to join on other channels.
1031 * @ie: information element(s) to include in the beacon
1032 * @ie_len: length of that
Johannes Berg8e30bc52009-04-22 17:45:38 +02001033 * @beacon_interval: beacon interval to use
Johannes Bergfffd0932009-07-08 14:22:54 +02001034 * @privacy: this is a protected network, keys will be configured
1035 * after joining
Teemu Paasikivifbd2c8d2010-06-14 12:55:31 +03001036 * @basic_rates: bitmap of basic rates to use when creating the IBSS
Felix Fietkaudd5b4cc2010-11-22 20:58:24 +01001037 * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
Johannes Berg04a773a2009-04-19 21:24:32 +02001038 */
1039struct cfg80211_ibss_params {
1040 u8 *ssid;
1041 u8 *bssid;
1042 struct ieee80211_channel *channel;
1043 u8 *ie;
1044 u8 ssid_len, ie_len;
Johannes Berg8e30bc52009-04-22 17:45:38 +02001045 u16 beacon_interval;
Teemu Paasikivifbd2c8d2010-06-14 12:55:31 +03001046 u32 basic_rates;
Johannes Berg04a773a2009-04-19 21:24:32 +02001047 bool channel_fixed;
Johannes Bergfffd0932009-07-08 14:22:54 +02001048 bool privacy;
Felix Fietkaudd5b4cc2010-11-22 20:58:24 +01001049 int mcast_rate[IEEE80211_NUM_BANDS];
Johannes Berg04a773a2009-04-19 21:24:32 +02001050};
1051
1052/**
Samuel Ortizb23aa672009-07-01 21:26:54 +02001053 * struct cfg80211_connect_params - Connection parameters
1054 *
1055 * This structure provides information needed to complete IEEE 802.11
1056 * authentication and association.
1057 *
1058 * @channel: The channel to use or %NULL if not specified (auto-select based
1059 * on scan results)
1060 * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
1061 * results)
1062 * @ssid: SSID
1063 * @ssid_len: Length of ssid in octets
1064 * @auth_type: Authentication type (algorithm)
Johannes Bergabe37c42010-06-07 11:12:27 +02001065 * @ie: IEs for association request
1066 * @ie_len: Length of assoc_ie in octets
Samuel Ortizb23aa672009-07-01 21:26:54 +02001067 * @privacy: indicates whether privacy-enabled APs should be used
1068 * @crypto: crypto settings
Johannes Bergfffd0932009-07-08 14:22:54 +02001069 * @key_len: length of WEP key for shared key authentication
1070 * @key_idx: index of WEP key for shared key authentication
1071 * @key: WEP key for shared key authentication
Samuel Ortizb23aa672009-07-01 21:26:54 +02001072 */
1073struct cfg80211_connect_params {
1074 struct ieee80211_channel *channel;
1075 u8 *bssid;
1076 u8 *ssid;
1077 size_t ssid_len;
1078 enum nl80211_auth_type auth_type;
1079 u8 *ie;
1080 size_t ie_len;
1081 bool privacy;
1082 struct cfg80211_crypto_settings crypto;
Johannes Bergfffd0932009-07-08 14:22:54 +02001083 const u8 *key;
1084 u8 key_len, key_idx;
Samuel Ortizb23aa672009-07-01 21:26:54 +02001085};
1086
1087/**
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001088 * enum wiphy_params_flags - set_wiphy_params bitfield values
Johannes Bergabe37c42010-06-07 11:12:27 +02001089 * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
1090 * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
1091 * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
1092 * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
1093 * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001094 */
1095enum wiphy_params_flags {
1096 WIPHY_PARAM_RETRY_SHORT = 1 << 0,
1097 WIPHY_PARAM_RETRY_LONG = 1 << 1,
1098 WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2,
1099 WIPHY_PARAM_RTS_THRESHOLD = 1 << 3,
Lukáš Turek81077e82009-12-21 22:50:47 +01001100 WIPHY_PARAM_COVERAGE_CLASS = 1 << 4,
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001101};
1102
Johannes Berg99303802009-07-01 21:26:59 +02001103/*
1104 * cfg80211_bitrate_mask - masks for bitrate control
1105 */
1106struct cfg80211_bitrate_mask {
Johannes Berg99303802009-07-01 21:26:59 +02001107 struct {
1108 u32 legacy;
Jouni Malinen37eb0b12010-01-06 13:09:08 +02001109 /* TODO: add support for masking MCS rates; e.g.: */
1110 /* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
Johannes Berg99303802009-07-01 21:26:59 +02001111 } control[IEEE80211_NUM_BANDS];
Johannes Berg99303802009-07-01 21:26:59 +02001112};
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001113/**
1114 * struct cfg80211_pmksa - PMK Security Association
1115 *
1116 * This structure is passed to the set/del_pmksa() method for PMKSA
1117 * caching.
1118 *
1119 * @bssid: The AP's BSSID.
1120 * @pmkid: The PMK material itself.
1121 */
1122struct cfg80211_pmksa {
1123 u8 *bssid;
1124 u8 *pmkid;
1125};
Johannes Berg99303802009-07-01 21:26:59 +02001126
Johannes Berg7643a2c2009-06-02 13:01:39 +02001127/**
Johannes Bergff1b6e62011-05-04 15:37:28 +02001128 * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
1129 * @mask: bitmask where to match pattern and where to ignore bytes,
1130 * one bit per byte, in same format as nl80211
1131 * @pattern: bytes to match where bitmask is 1
1132 * @pattern_len: length of pattern (in bytes)
1133 *
1134 * Internal note: @mask and @pattern are allocated in one chunk of
1135 * memory, free @mask only!
1136 */
1137struct cfg80211_wowlan_trig_pkt_pattern {
1138 u8 *mask, *pattern;
1139 int pattern_len;
1140};
1141
1142/**
1143 * struct cfg80211_wowlan - Wake on Wireless-LAN support info
1144 *
1145 * This structure defines the enabled WoWLAN triggers for the device.
1146 * @any: wake up on any activity -- special trigger if device continues
1147 * operating as normal during suspend
1148 * @disconnect: wake up if getting disconnected
1149 * @magic_pkt: wake up on receiving magic packet
1150 * @patterns: wake up on receiving packet matching a pattern
1151 * @n_patterns: number of patterns
Johannes Berg77dbbb12011-07-13 10:48:55 +02001152 * @gtk_rekey_failure: wake up on GTK rekey failure
1153 * @eap_identity_req: wake up on EAP identity request packet
1154 * @four_way_handshake: wake up on 4-way handshake
1155 * @rfkill_release: wake up when rfkill is released
Johannes Bergff1b6e62011-05-04 15:37:28 +02001156 */
1157struct cfg80211_wowlan {
Johannes Berg77dbbb12011-07-13 10:48:55 +02001158 bool any, disconnect, magic_pkt, gtk_rekey_failure,
1159 eap_identity_req, four_way_handshake,
1160 rfkill_release;
Johannes Bergff1b6e62011-05-04 15:37:28 +02001161 struct cfg80211_wowlan_trig_pkt_pattern *patterns;
1162 int n_patterns;
1163};
1164
1165/**
Johannes Berge5497d72011-07-05 16:35:40 +02001166 * struct cfg80211_gtk_rekey_data - rekey data
1167 * @kek: key encryption key
1168 * @kck: key confirmation key
1169 * @replay_ctr: replay counter
1170 */
1171struct cfg80211_gtk_rekey_data {
1172 u8 kek[NL80211_KEK_LEN];
1173 u8 kck[NL80211_KCK_LEN];
1174 u8 replay_ctr[NL80211_REPLAY_CTR_LEN];
1175};
1176
1177/**
Johannes Berg704232c2007-04-23 12:20:05 -07001178 * struct cfg80211_ops - backend description for wireless configuration
1179 *
1180 * This struct is registered by fullmac card drivers and/or wireless stacks
1181 * in order to handle configuration requests on their interfaces.
1182 *
1183 * All callbacks except where otherwise noted should return 0
1184 * on success or a negative error code.
1185 *
Johannes Berg43fb45cb2007-04-24 14:07:27 -07001186 * All operations are currently invoked under rtnl for consistency with the
1187 * wireless extensions but this is subject to reevaluation as soon as this
1188 * code is used more widely and we have a first user without wext.
1189 *
Johannes Bergff1b6e62011-05-04 15:37:28 +02001190 * @suspend: wiphy device needs to be suspended. The variable @wow will
1191 * be %NULL or contain the enabled Wake-on-Wireless triggers that are
1192 * configured for the device.
Johannes Berg0378b3f2009-01-19 11:20:52 -05001193 * @resume: wiphy device needs to be resumed
1194 *
Johannes Berg60719ff2008-09-16 14:55:09 +02001195 * @add_virtual_intf: create a new virtual interface with the given name,
Johannes Berg463d0182009-07-14 00:33:35 +02001196 * must set the struct wireless_dev's iftype. Beware: You must create
Johannes Bergf9e10ce2010-12-03 09:20:42 +01001197 * the new netdev in the wiphy's network namespace! Returns the netdev,
1198 * or an ERR_PTR.
Johannes Berg704232c2007-04-23 12:20:05 -07001199 *
1200 * @del_virtual_intf: remove the virtual interface determined by ifindex.
Johannes Berg55682962007-09-20 13:09:35 -04001201 *
Johannes Berg60719ff2008-09-16 14:55:09 +02001202 * @change_virtual_intf: change type/configuration of virtual interface,
1203 * keep the struct wireless_dev's iftype updated.
Johannes Berg55682962007-09-20 13:09:35 -04001204 *
Johannes Berg41ade002007-12-19 02:03:29 +01001205 * @add_key: add a key with the given parameters. @mac_addr will be %NULL
1206 * when adding a group key.
1207 *
1208 * @get_key: get information about the key with the given parameters.
1209 * @mac_addr will be %NULL when requesting information for a group
1210 * key. All pointers given to the @callback function need not be valid
Johannes Berge3da5742009-05-18 19:56:36 +02001211 * after it returns. This function should return an error if it is
1212 * not possible to retrieve the key, -ENOENT if it doesn't exist.
Johannes Berg41ade002007-12-19 02:03:29 +01001213 *
1214 * @del_key: remove a key given the @mac_addr (%NULL for a group key)
Johannes Berge3da5742009-05-18 19:56:36 +02001215 * and @key_index, return -ENOENT if the key doesn't exist.
Johannes Berg41ade002007-12-19 02:03:29 +01001216 *
1217 * @set_default_key: set the default key on an interface
Johannes Berged1b6cc2007-12-19 02:03:32 +01001218 *
Jouni Malinen3cfcf6a2009-01-08 13:32:02 +02001219 * @set_default_mgmt_key: set the default management frame key on an interface
1220 *
Johannes Berge5497d72011-07-05 16:35:40 +02001221 * @set_rekey_data: give the data necessary for GTK rekeying to the driver
1222 *
Johannes Berged1b6cc2007-12-19 02:03:32 +01001223 * @add_beacon: Add a beacon with given parameters, @head, @interval
1224 * and @dtim_period will be valid, @tail is optional.
1225 * @set_beacon: Change the beacon parameters for an access point mode
1226 * interface. This should reject the call when no beacon has been
1227 * configured.
1228 * @del_beacon: Remove beacon configuration and stop sending the beacon.
Johannes Berg5727ef12007-12-19 02:03:34 +01001229 *
1230 * @add_station: Add a new station.
Johannes Berg5727ef12007-12-19 02:03:34 +01001231 * @del_station: Remove a station; @mac may be NULL to remove all stations.
Johannes Berg5727ef12007-12-19 02:03:34 +01001232 * @change_station: Modify a given station.
Johannes Bergabe37c42010-06-07 11:12:27 +02001233 * @get_station: get station information for the station identified by @mac
1234 * @dump_station: dump station callback -- resume dump at index @idx
1235 *
1236 * @add_mpath: add a fixed mesh path
1237 * @del_mpath: delete a given mesh path
1238 * @change_mpath: change a given mesh path
1239 * @get_mpath: get a mesh path for the given parameters
1240 * @dump_mpath: dump mesh path callback -- resume dump at index @idx
Johannes Bergf52555a2011-01-06 22:36:45 +01001241 * @join_mesh: join the mesh network with the specified parameters
1242 * @leave_mesh: leave the current mesh network
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +01001243 *
Javier Cardona24bdd9f2010-12-16 17:37:48 -08001244 * @get_mesh_config: Get the current mesh configuration
colin@cozybit.com93da9cc2008-10-21 12:03:48 -07001245 *
Javier Cardona24bdd9f2010-12-16 17:37:48 -08001246 * @update_mesh_config: Update mesh parameters on a running mesh.
colin@cozybit.com93da9cc2008-10-21 12:03:48 -07001247 * The mask is a bitfield which tells us which parameters to
1248 * set, and which to leave alone.
1249 *
Jouni Malinen9f1ba902008-08-07 20:07:01 +03001250 * @change_bss: Modify parameters for a given BSS.
Jouni Malinen31888482008-10-30 16:59:24 +02001251 *
1252 * @set_txq_params: Set TX queue parameters
Jouni Malinen72bdcf32008-11-26 16:15:24 +02001253 *
Johannes Bergf444de02010-05-05 15:25:02 +02001254 * @set_channel: Set channel for a given wireless interface. Some devices
1255 * may support multi-channel operation (by channel hopping) so cfg80211
1256 * doesn't verify much. Note, however, that the passed netdev may be
1257 * %NULL as well if the user requested changing the channel for the
1258 * device itself, or for a monitor interface.
Jouni Malinen9aed3cc2009-01-13 16:03:29 +02001259 *
Johannes Berg2a519312009-02-10 21:25:55 +01001260 * @scan: Request to do a scan. If returning zero, the scan request is given
1261 * the driver, and will be valid until passed to cfg80211_scan_done().
1262 * For scan results, call cfg80211_inform_bss(); you can call this outside
1263 * the scan/scan_done bracket too.
Jouni Malinen636a5d32009-03-19 13:39:22 +02001264 *
1265 * @auth: Request to authenticate with the specified peer
1266 * @assoc: Request to (re)associate with the specified peer
1267 * @deauth: Request to deauthenticate from the specified peer
1268 * @disassoc: Request to disassociate from the specified peer
Johannes Berg04a773a2009-04-19 21:24:32 +02001269 *
Samuel Ortizb23aa672009-07-01 21:26:54 +02001270 * @connect: Connect to the ESS with the specified parameters. When connected,
1271 * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
1272 * If the connection fails for some reason, call cfg80211_connect_result()
1273 * with the status from the AP.
1274 * @disconnect: Disconnect from the BSS/ESS.
1275 *
Johannes Berg04a773a2009-04-19 21:24:32 +02001276 * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
1277 * cfg80211_ibss_joined(), also call that function when changing BSSID due
1278 * to a merge.
1279 * @leave_ibss: Leave the IBSS.
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001280 *
1281 * @set_wiphy_params: Notify that wiphy parameters have changed;
1282 * @changed bitfield (see &enum wiphy_params_flags) describes which values
1283 * have changed. The actual parameter values are available in
1284 * struct wiphy. If returning an error, no value should be changed.
Johannes Berg7643a2c2009-06-02 13:01:39 +02001285 *
1286 * @set_tx_power: set the transmit power according to the parameters
1287 * @get_tx_power: store the current TX power into the dbm variable;
Johannes Berg1f87f7d2009-06-02 13:01:41 +02001288 * return 0 if successful
1289 *
Johannes Bergabe37c42010-06-07 11:12:27 +02001290 * @set_wds_peer: set the WDS peer for a WDS interface
1291 *
Johannes Berg1f87f7d2009-06-02 13:01:41 +02001292 * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
1293 * functions to adjust rfkill hw state
Johannes Bergaff89a92009-07-01 21:26:51 +02001294 *
Holger Schurig61fa7132009-11-11 12:25:40 +01001295 * @dump_survey: get site survey information.
1296 *
Jouni Malinen9588bbd2009-12-23 13:15:41 +01001297 * @remain_on_channel: Request the driver to remain awake on the specified
1298 * channel for the specified duration to complete an off-channel
1299 * operation (e.g., public action frame exchange). When the driver is
1300 * ready on the requested channel, it must indicate this with an event
1301 * notification by calling cfg80211_ready_on_channel().
1302 * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
1303 * This allows the operation to be terminated prior to timeout based on
1304 * the duration value.
Johannes Bergf7ca38d2010-11-25 10:02:29 +01001305 * @mgmt_tx: Transmit a management frame.
1306 * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
1307 * frame on another channel
Jouni Malinen9588bbd2009-12-23 13:15:41 +01001308 *
Johannes Bergaff89a92009-07-01 21:26:51 +02001309 * @testmode_cmd: run a test mode command
Wey-Yi Guy71063f02011-05-20 09:05:54 -07001310 * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be
1311 * used by the function, but 0 and 1 must not be touched. Additionally,
1312 * return error codes other than -ENOBUFS and -ENOENT will terminate the
1313 * dump and return to userspace with an error, so be careful. If any data
1314 * was passed in from userspace then the data/len arguments will be present
1315 * and point to the data contained in %NL80211_ATTR_TESTDATA.
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001316 *
Johannes Bergabe37c42010-06-07 11:12:27 +02001317 * @set_bitrate_mask: set the bitrate mask configuration
1318 *
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001319 * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
1320 * devices running firmwares capable of generating the (re) association
1321 * RSN IE. It allows for faster roaming between WPA2 BSSIDs.
1322 * @del_pmksa: Delete a cached PMKID.
1323 * @flush_pmksa: Flush all cached PMKIDs.
Juuso Oikarinen9043f3b2010-04-27 12:47:41 +03001324 * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
1325 * allows the driver to adjust the dynamic ps timeout value.
Juuso Oikarinend6dc1a32010-03-23 09:02:33 +02001326 * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
Luciano Coelho807f8a82011-05-11 17:09:35 +03001327 * @sched_scan_start: Tell the driver to start a scheduled scan.
1328 * @sched_scan_stop: Tell the driver to stop an ongoing scheduled
1329 * scan. The driver_initiated flag specifies whether the driver
1330 * itself has informed that the scan has stopped.
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001331 *
Johannes Berg271733c2010-10-13 12:06:23 +02001332 * @mgmt_frame_register: Notify driver that a management frame type was
1333 * registered. Note that this callback may not sleep, and cannot run
1334 * concurrently with itself.
Bruno Randolf547025d2010-12-02 16:23:12 +09001335 *
1336 * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
1337 * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
1338 * reject TX/RX mask combinations they cannot support by returning -EINVAL
1339 * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
1340 *
1341 * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
John W. Linville36777132011-03-07 16:17:59 -05001342 *
1343 * @set_ringparam: Set tx and rx ring sizes.
1344 *
1345 * @get_ringparam: Get tx and rx ring current and maximum sizes.
Johannes Berg704232c2007-04-23 12:20:05 -07001346 */
1347struct cfg80211_ops {
Johannes Bergff1b6e62011-05-04 15:37:28 +02001348 int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
Johannes Berg0378b3f2009-01-19 11:20:52 -05001349 int (*resume)(struct wiphy *wiphy);
1350
Johannes Bergf9e10ce2010-12-03 09:20:42 +01001351 struct net_device * (*add_virtual_intf)(struct wiphy *wiphy,
1352 char *name,
1353 enum nl80211_iftype type,
1354 u32 *flags,
1355 struct vif_params *params);
Johannes Berg463d0182009-07-14 00:33:35 +02001356 int (*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev);
Johannes Berge36d56b2009-06-09 21:04:43 +02001357 int (*change_virtual_intf)(struct wiphy *wiphy,
1358 struct net_device *dev,
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +01001359 enum nl80211_iftype type, u32 *flags,
1360 struct vif_params *params);
Johannes Berg41ade002007-12-19 02:03:29 +01001361
1362 int (*add_key)(struct wiphy *wiphy, struct net_device *netdev,
Johannes Berge31b8212010-10-05 19:39:30 +02001363 u8 key_index, bool pairwise, const u8 *mac_addr,
Johannes Berg41ade002007-12-19 02:03:29 +01001364 struct key_params *params);
1365 int (*get_key)(struct wiphy *wiphy, struct net_device *netdev,
Johannes Berge31b8212010-10-05 19:39:30 +02001366 u8 key_index, bool pairwise, const u8 *mac_addr,
1367 void *cookie,
Johannes Berg41ade002007-12-19 02:03:29 +01001368 void (*callback)(void *cookie, struct key_params*));
1369 int (*del_key)(struct wiphy *wiphy, struct net_device *netdev,
Johannes Berge31b8212010-10-05 19:39:30 +02001370 u8 key_index, bool pairwise, const u8 *mac_addr);
Johannes Berg41ade002007-12-19 02:03:29 +01001371 int (*set_default_key)(struct wiphy *wiphy,
1372 struct net_device *netdev,
Johannes Bergdbd2fd62010-12-09 19:58:59 +01001373 u8 key_index, bool unicast, bool multicast);
Jouni Malinen3cfcf6a2009-01-08 13:32:02 +02001374 int (*set_default_mgmt_key)(struct wiphy *wiphy,
1375 struct net_device *netdev,
1376 u8 key_index);
Johannes Berged1b6cc2007-12-19 02:03:32 +01001377
1378 int (*add_beacon)(struct wiphy *wiphy, struct net_device *dev,
1379 struct beacon_parameters *info);
1380 int (*set_beacon)(struct wiphy *wiphy, struct net_device *dev,
1381 struct beacon_parameters *info);
1382 int (*del_beacon)(struct wiphy *wiphy, struct net_device *dev);
Johannes Berg5727ef12007-12-19 02:03:34 +01001383
1384
1385 int (*add_station)(struct wiphy *wiphy, struct net_device *dev,
1386 u8 *mac, struct station_parameters *params);
1387 int (*del_station)(struct wiphy *wiphy, struct net_device *dev,
1388 u8 *mac);
1389 int (*change_station)(struct wiphy *wiphy, struct net_device *dev,
1390 u8 *mac, struct station_parameters *params);
Johannes Bergfd5b74d2007-12-19 02:03:36 +01001391 int (*get_station)(struct wiphy *wiphy, struct net_device *dev,
Luis Carlos Cobo2ec600d2008-02-23 15:17:06 +01001392 u8 *mac, struct station_info *sinfo);
1393 int (*dump_station)(struct wiphy *wiphy, struct net_device *dev,
1394 int idx, u8 *mac, struct station_info *sinfo);
1395
1396 int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev,
1397 u8 *dst, u8 *next_hop);
1398 int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev,
1399 u8 *dst);
1400 int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev,
1401 u8 *dst, u8 *next_hop);
1402 int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev,
1403 u8 *dst, u8 *next_hop,
1404 struct mpath_info *pinfo);
1405 int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
1406 int idx, u8 *dst, u8 *next_hop,
1407 struct mpath_info *pinfo);
Javier Cardona24bdd9f2010-12-16 17:37:48 -08001408 int (*get_mesh_config)(struct wiphy *wiphy,
colin@cozybit.com93da9cc2008-10-21 12:03:48 -07001409 struct net_device *dev,
1410 struct mesh_config *conf);
Javier Cardona24bdd9f2010-12-16 17:37:48 -08001411 int (*update_mesh_config)(struct wiphy *wiphy,
Johannes Berg29cbe682010-12-03 09:20:44 +01001412 struct net_device *dev, u32 mask,
1413 const struct mesh_config *nconf);
1414 int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev,
1415 const struct mesh_config *conf,
1416 const struct mesh_setup *setup);
1417 int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
1418
Jouni Malinen9f1ba902008-08-07 20:07:01 +03001419 int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
1420 struct bss_parameters *params);
Jouni Malinen31888482008-10-30 16:59:24 +02001421
1422 int (*set_txq_params)(struct wiphy *wiphy,
1423 struct ieee80211_txq_params *params);
Jouni Malinen72bdcf32008-11-26 16:15:24 +02001424
Johannes Bergf444de02010-05-05 15:25:02 +02001425 int (*set_channel)(struct wiphy *wiphy, struct net_device *dev,
Jouni Malinen72bdcf32008-11-26 16:15:24 +02001426 struct ieee80211_channel *chan,
Sujith094d05d2008-12-12 11:57:43 +05301427 enum nl80211_channel_type channel_type);
Jouni Malinen9aed3cc2009-01-13 16:03:29 +02001428
Johannes Berg2a519312009-02-10 21:25:55 +01001429 int (*scan)(struct wiphy *wiphy, struct net_device *dev,
1430 struct cfg80211_scan_request *request);
Jouni Malinen636a5d32009-03-19 13:39:22 +02001431
1432 int (*auth)(struct wiphy *wiphy, struct net_device *dev,
1433 struct cfg80211_auth_request *req);
1434 int (*assoc)(struct wiphy *wiphy, struct net_device *dev,
1435 struct cfg80211_assoc_request *req);
1436 int (*deauth)(struct wiphy *wiphy, struct net_device *dev,
Johannes Berg667503d2009-07-07 03:56:11 +02001437 struct cfg80211_deauth_request *req,
1438 void *cookie);
Jouni Malinen636a5d32009-03-19 13:39:22 +02001439 int (*disassoc)(struct wiphy *wiphy, struct net_device *dev,
Johannes Berg667503d2009-07-07 03:56:11 +02001440 struct cfg80211_disassoc_request *req,
1441 void *cookie);
Johannes Berg04a773a2009-04-19 21:24:32 +02001442
Samuel Ortizb23aa672009-07-01 21:26:54 +02001443 int (*connect)(struct wiphy *wiphy, struct net_device *dev,
1444 struct cfg80211_connect_params *sme);
1445 int (*disconnect)(struct wiphy *wiphy, struct net_device *dev,
1446 u16 reason_code);
1447
Johannes Berg04a773a2009-04-19 21:24:32 +02001448 int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
1449 struct cfg80211_ibss_params *params);
1450 int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001451
1452 int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
Johannes Berg7643a2c2009-06-02 13:01:39 +02001453
1454 int (*set_tx_power)(struct wiphy *wiphy,
Juuso Oikarinenfa61cf72010-06-23 12:12:37 +03001455 enum nl80211_tx_power_setting type, int mbm);
Johannes Berg7643a2c2009-06-02 13:01:39 +02001456 int (*get_tx_power)(struct wiphy *wiphy, int *dbm);
Johannes Berg1f87f7d2009-06-02 13:01:41 +02001457
Johannes Bergab737a42009-07-01 21:26:58 +02001458 int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
Johannes Berg388ac772010-10-07 13:11:09 +02001459 const u8 *addr);
Johannes Bergab737a42009-07-01 21:26:58 +02001460
Johannes Berg1f87f7d2009-06-02 13:01:41 +02001461 void (*rfkill_poll)(struct wiphy *wiphy);
Johannes Bergaff89a92009-07-01 21:26:51 +02001462
1463#ifdef CONFIG_NL80211_TESTMODE
1464 int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
Wey-Yi Guy71063f02011-05-20 09:05:54 -07001465 int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb,
1466 struct netlink_callback *cb,
1467 void *data, int len);
Johannes Bergaff89a92009-07-01 21:26:51 +02001468#endif
Johannes Bergbc92afd2009-07-01 21:26:57 +02001469
Johannes Berg99303802009-07-01 21:26:59 +02001470 int (*set_bitrate_mask)(struct wiphy *wiphy,
1471 struct net_device *dev,
1472 const u8 *peer,
1473 const struct cfg80211_bitrate_mask *mask);
1474
Holger Schurig61fa7132009-11-11 12:25:40 +01001475 int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev,
1476 int idx, struct survey_info *info);
1477
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001478 int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
1479 struct cfg80211_pmksa *pmksa);
1480 int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
1481 struct cfg80211_pmksa *pmksa);
1482 int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
1483
Jouni Malinen9588bbd2009-12-23 13:15:41 +01001484 int (*remain_on_channel)(struct wiphy *wiphy,
1485 struct net_device *dev,
1486 struct ieee80211_channel *chan,
1487 enum nl80211_channel_type channel_type,
1488 unsigned int duration,
1489 u64 *cookie);
1490 int (*cancel_remain_on_channel)(struct wiphy *wiphy,
1491 struct net_device *dev,
1492 u64 cookie);
1493
Johannes Berg2e161f72010-08-12 15:38:38 +02001494 int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
Johannes Bergf7ca38d2010-11-25 10:02:29 +01001495 struct ieee80211_channel *chan, bool offchan,
Jouni Malinen026331c2010-02-15 12:53:10 +02001496 enum nl80211_channel_type channel_type,
Johannes Bergf7ca38d2010-11-25 10:02:29 +01001497 bool channel_type_valid, unsigned int wait,
Jouni Malinen026331c2010-02-15 12:53:10 +02001498 const u8 *buf, size_t len, u64 *cookie);
Johannes Bergf7ca38d2010-11-25 10:02:29 +01001499 int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
1500 struct net_device *dev,
1501 u64 cookie);
Jouni Malinen026331c2010-02-15 12:53:10 +02001502
Johannes Bergbc92afd2009-07-01 21:26:57 +02001503 int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
1504 bool enabled, int timeout);
Juuso Oikarinend6dc1a32010-03-23 09:02:33 +02001505
1506 int (*set_cqm_rssi_config)(struct wiphy *wiphy,
1507 struct net_device *dev,
1508 s32 rssi_thold, u32 rssi_hyst);
Johannes Berg271733c2010-10-13 12:06:23 +02001509
1510 void (*mgmt_frame_register)(struct wiphy *wiphy,
1511 struct net_device *dev,
1512 u16 frame_type, bool reg);
Bruno Randolfafe0cbf2010-11-10 12:50:50 +09001513
1514 int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
1515 int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
John W. Linville36777132011-03-07 16:17:59 -05001516
1517 int (*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx);
1518 void (*get_ringparam)(struct wiphy *wiphy,
1519 u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
Luciano Coelho807f8a82011-05-11 17:09:35 +03001520
1521 int (*sched_scan_start)(struct wiphy *wiphy,
1522 struct net_device *dev,
1523 struct cfg80211_sched_scan_request *request);
Luciano Coelho85a99942011-05-12 16:28:29 +03001524 int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
Johannes Berge5497d72011-07-05 16:35:40 +02001525
1526 int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
1527 struct cfg80211_gtk_rekey_data *data);
Johannes Berg704232c2007-04-23 12:20:05 -07001528};
1529
Johannes Bergd3236552009-04-20 14:31:42 +02001530/*
1531 * wireless hardware and networking interfaces structures
1532 * and registration/helper functions
1533 */
1534
1535/**
Johannes Berg5be83de2009-11-19 00:56:28 +01001536 * enum wiphy_flags - wiphy capability flags
1537 *
1538 * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device
Johannes Bergd3236552009-04-20 14:31:42 +02001539 * has its own custom regulatory domain and cannot identify the
1540 * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
1541 * we will disregard the first regulatory hint (when the
1542 * initiator is %REGDOM_SET_BY_CORE).
Johannes Berg5be83de2009-11-19 00:56:28 +01001543 * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
1544 * ignore regulatory domain settings until it gets its own regulatory
Luis R. Rodriguez749b5272010-10-20 10:18:54 -07001545 * domain via its regulatory_hint() unless the regulatory hint is
1546 * from a country IE. After its gets its own regulatory domain it will
1547 * only allow further regulatory domain settings to further enhance
1548 * compliance. For example if channel 13 and 14 are disabled by this
1549 * regulatory domain no user regulatory domain can enable these channels
1550 * at a later time. This can be used for devices which do not have
1551 * calibration information guaranteed for frequencies or settings
1552 * outside of its regulatory domain.
Johannes Berg5be83de2009-11-19 00:56:28 +01001553 * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
1554 * that passive scan flags and beaconing flags may not be lifted by
1555 * cfg80211 due to regulatory beacon hints. For more information on beacon
Luis R. Rodriguez37184242009-07-30 17:43:48 -07001556 * hints read the documenation for regulatory_hint_found_beacon()
Johannes Berg5be83de2009-11-19 00:56:28 +01001557 * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
1558 * wiphy at all
Johannes Berg7527a782011-05-13 10:58:57 +02001559 * @WIPHY_FLAG_ENFORCE_COMBINATIONS: Set this flag to enforce interface
1560 * combinations for this device. This flag is used for backward
1561 * compatibility only until all drivers advertise combinations and
1562 * they will always be enforced.
Johannes Berg5be83de2009-11-19 00:56:28 +01001563 * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
1564 * by default -- this flag will be set depending on the kernel's default
1565 * on wiphy_new(), but can be changed by the driver if it has a good
1566 * reason to override the default
Johannes Berg9bc383d2009-11-19 11:55:19 +01001567 * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
1568 * on a VLAN interface)
1569 * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
Johannes Bergc0692b82010-08-27 14:26:53 +03001570 * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the
1571 * control port protocol ethertype. The device also honours the
1572 * control_port_no_encrypt flag.
Johannes Berge31b8212010-10-05 19:39:30 +02001573 * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
Javier Cardona15d5dda2011-04-07 15:08:28 -07001574 * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
1575 * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
Randy Dunlap1ba01452011-05-22 17:16:20 -07001576 * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans.
Johannes Berg5be83de2009-11-19 00:56:28 +01001577 */
1578enum wiphy_flags {
Johannes Bergc0692b82010-08-27 14:26:53 +03001579 WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
1580 WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
1581 WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
1582 WIPHY_FLAG_NETNS_OK = BIT(3),
1583 WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
1584 WIPHY_FLAG_4ADDR_AP = BIT(5),
1585 WIPHY_FLAG_4ADDR_STATION = BIT(6),
1586 WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7),
Jussi Kivilinna309075c2010-11-12 08:53:56 +02001587 WIPHY_FLAG_IBSS_RSN = BIT(8),
Javier Cardona15d5dda2011-04-07 15:08:28 -07001588 WIPHY_FLAG_MESH_AUTH = BIT(10),
Luciano Coelho807f8a82011-05-11 17:09:35 +03001589 WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11),
Johannes Berg7527a782011-05-13 10:58:57 +02001590 WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12),
1591};
1592
1593/**
1594 * struct ieee80211_iface_limit - limit on certain interface types
1595 * @max: maximum number of interfaces of these types
1596 * @types: interface types (bits)
1597 */
1598struct ieee80211_iface_limit {
1599 u16 max;
1600 u16 types;
1601};
1602
1603/**
1604 * struct ieee80211_iface_combination - possible interface combination
1605 * @limits: limits for the given interface types
1606 * @n_limits: number of limitations
1607 * @num_different_channels: can use up to this many different channels
1608 * @max_interfaces: maximum number of interfaces in total allowed in this
1609 * group
1610 * @beacon_int_infra_match: In this combination, the beacon intervals
1611 * between infrastructure and AP types must match. This is required
1612 * only in special cases.
1613 *
1614 * These examples can be expressed as follows:
1615 *
1616 * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
1617 *
1618 * struct ieee80211_iface_limit limits1[] = {
1619 * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
1620 * { .max = 1, .types = BIT(NL80211_IFTYPE_AP}, },
1621 * };
1622 * struct ieee80211_iface_combination combination1 = {
1623 * .limits = limits1,
1624 * .n_limits = ARRAY_SIZE(limits1),
1625 * .max_interfaces = 2,
1626 * .beacon_int_infra_match = true,
1627 * };
1628 *
1629 *
1630 * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
1631 *
1632 * struct ieee80211_iface_limit limits2[] = {
1633 * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
1634 * BIT(NL80211_IFTYPE_P2P_GO), },
1635 * };
1636 * struct ieee80211_iface_combination combination2 = {
1637 * .limits = limits2,
1638 * .n_limits = ARRAY_SIZE(limits2),
1639 * .max_interfaces = 8,
1640 * .num_different_channels = 1,
1641 * };
1642 *
1643 *
1644 * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
1645 * This allows for an infrastructure connection and three P2P connections.
1646 *
1647 * struct ieee80211_iface_limit limits3[] = {
1648 * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
1649 * { .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) |
1650 * BIT(NL80211_IFTYPE_P2P_CLIENT), },
1651 * };
1652 * struct ieee80211_iface_combination combination3 = {
1653 * .limits = limits3,
1654 * .n_limits = ARRAY_SIZE(limits3),
1655 * .max_interfaces = 4,
1656 * .num_different_channels = 2,
1657 * };
1658 */
1659struct ieee80211_iface_combination {
1660 const struct ieee80211_iface_limit *limits;
1661 u32 num_different_channels;
1662 u16 max_interfaces;
1663 u8 n_limits;
1664 bool beacon_int_infra_match;
Johannes Berg5be83de2009-11-19 00:56:28 +01001665};
1666
Johannes Bergef15aac2010-01-20 12:02:33 +01001667struct mac_address {
1668 u8 addr[ETH_ALEN];
1669};
1670
Johannes Berg2e161f72010-08-12 15:38:38 +02001671struct ieee80211_txrx_stypes {
1672 u16 tx, rx;
1673};
1674
Johannes Berg5be83de2009-11-19 00:56:28 +01001675/**
Johannes Bergff1b6e62011-05-04 15:37:28 +02001676 * enum wiphy_wowlan_support_flags - WoWLAN support flags
1677 * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any"
1678 * trigger that keeps the device operating as-is and
1679 * wakes up the host on any activity, for example a
1680 * received packet that passed filtering; note that the
1681 * packet should be preserved in that case
1682 * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
1683 * (see nl80211.h)
1684 * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
Johannes Berg77dbbb12011-07-13 10:48:55 +02001685 * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep
1686 * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure
1687 * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request
1688 * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure
1689 * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release
Johannes Bergff1b6e62011-05-04 15:37:28 +02001690 */
1691enum wiphy_wowlan_support_flags {
Johannes Berg77dbbb12011-07-13 10:48:55 +02001692 WIPHY_WOWLAN_ANY = BIT(0),
1693 WIPHY_WOWLAN_MAGIC_PKT = BIT(1),
1694 WIPHY_WOWLAN_DISCONNECT = BIT(2),
1695 WIPHY_WOWLAN_SUPPORTS_GTK_REKEY = BIT(3),
1696 WIPHY_WOWLAN_GTK_REKEY_FAILURE = BIT(4),
1697 WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5),
1698 WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6),
1699 WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7),
Johannes Bergff1b6e62011-05-04 15:37:28 +02001700};
1701
1702/**
1703 * struct wiphy_wowlan_support - WoWLAN support data
1704 * @flags: see &enum wiphy_wowlan_support_flags
1705 * @n_patterns: number of supported wakeup patterns
1706 * (see nl80211.h for the pattern definition)
1707 * @pattern_max_len: maximum length of each pattern
1708 * @pattern_min_len: minimum length of each pattern
1709 */
1710struct wiphy_wowlan_support {
1711 u32 flags;
1712 int n_patterns;
1713 int pattern_max_len;
1714 int pattern_min_len;
1715};
1716
1717/**
Johannes Berg5be83de2009-11-19 00:56:28 +01001718 * struct wiphy - wireless hardware description
Luis R. Rodriguez2784fe92010-12-15 19:24:11 -08001719 * @reg_notifier: the driver's regulatory notification callback,
1720 * note that if your driver uses wiphy_apply_custom_regulatory()
1721 * the reg_notifier's request can be passed as NULL
Johannes Bergd3236552009-04-20 14:31:42 +02001722 * @regd: the driver's regulatory domain, if one was requested via
1723 * the regulatory_hint() API. This can be used by the driver
1724 * on the reg_notifier() if it chooses to ignore future
1725 * regulatory domain changes caused by other drivers.
1726 * @signal_type: signal type reported in &struct cfg80211_bss.
1727 * @cipher_suites: supported cipher suites
1728 * @n_cipher_suites: number of supported cipher suites
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001729 * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
1730 * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
1731 * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
1732 * -1 = fragmentation disabled, only odd values >= 256 used
1733 * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
Johannes Bergabe37c42010-06-07 11:12:27 +02001734 * @_net: the network namespace this wiphy currently lives in
Johannes Bergef15aac2010-01-20 12:02:33 +01001735 * @perm_addr: permanent MAC address of this device
1736 * @addr_mask: If the device supports multiple MAC addresses by masking,
1737 * set this to a mask with variable bits set to 1, e.g. if the last
1738 * four bits are variable then set it to 00:...:00:0f. The actual
1739 * variable bits shall be determined by the interfaces added, with
1740 * interfaces not matching the mask being rejected to be brought up.
1741 * @n_addresses: number of addresses in @addresses.
1742 * @addresses: If the device has more than one address, set this pointer
1743 * to a list of addresses (6 bytes each). The first one will be used
1744 * by default for perm_addr. In this case, the mask should be set to
1745 * all-zeroes. In this case it is assumed that the device can handle
1746 * the same number of arbitrary MAC addresses.
Randy Dunlapd2f15282011-09-08 10:16:50 -07001747 * @registered: protects ->resume and ->suspend sysfs callbacks against
1748 * unregister hardware
Johannes Bergabe37c42010-06-07 11:12:27 +02001749 * @debugfsdir: debugfs directory used for this wiphy, will be renamed
1750 * automatically on wiphy renames
1751 * @dev: (virtual) struct device for this wiphy
1752 * @wext: wireless extension handlers
1753 * @priv: driver private data (sized according to wiphy_new() parameter)
1754 * @interface_modes: bitmask of interfaces types valid for this wiphy,
1755 * must be set by driver
Johannes Berg7527a782011-05-13 10:58:57 +02001756 * @iface_combinations: Valid interface combinations array, should not
1757 * list single interface types.
1758 * @n_iface_combinations: number of entries in @iface_combinations array.
1759 * @software_iftypes: bitmask of software interface types, these are not
1760 * subject to any restrictions since they are purely managed in SW.
Johannes Bergabe37c42010-06-07 11:12:27 +02001761 * @flags: wiphy flags, see &enum wiphy_flags
1762 * @bss_priv_size: each BSS struct has private data allocated with it,
1763 * this variable determines its size
1764 * @max_scan_ssids: maximum number of SSIDs the device can scan for in
1765 * any given scan
Luciano Coelho93b6aa62011-07-13 14:57:28 +03001766 * @max_sched_scan_ssids: maximum number of SSIDs the device can scan
1767 * for in any given scheduled scan
Johannes Bergabe37c42010-06-07 11:12:27 +02001768 * @max_scan_ie_len: maximum length of user-controlled IEs device can
1769 * add to probe request frames transmitted during a scan, must not
1770 * include fixed IEs like supported rates
Luciano Coelho5a865ba2011-07-13 14:57:29 +03001771 * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled
1772 * scans
Johannes Bergabe37c42010-06-07 11:12:27 +02001773 * @coverage_class: current coverage class
1774 * @fw_version: firmware version for ethtool reporting
1775 * @hw_version: hardware version for ethtool reporting
1776 * @max_num_pmkids: maximum number of PMKIDs supported by device
1777 * @privid: a pointer that drivers can use to identify if an arbitrary
1778 * wiphy is theirs, e.g. in global notifiers
1779 * @bands: information about bands/channels supported by this device
Johannes Berg2e161f72010-08-12 15:38:38 +02001780 *
1781 * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
1782 * transmitted through nl80211, points to an array indexed by interface
1783 * type
Bruno Randolfa7ffac92010-12-08 13:59:24 +09001784 *
Bruno Randolf7f531e02010-12-16 11:30:22 +09001785 * @available_antennas_tx: bitmap of antennas which are available to be
1786 * configured as TX antennas. Antenna configuration commands will be
1787 * rejected unless this or @available_antennas_rx is set.
1788 *
1789 * @available_antennas_rx: bitmap of antennas which are available to be
1790 * configured as RX antennas. Antenna configuration commands will be
1791 * rejected unless this or @available_antennas_tx is set.
Johannes Berga2939112010-12-14 17:54:28 +01001792 *
1793 * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
1794 * may request, if implemented.
Johannes Bergff1b6e62011-05-04 15:37:28 +02001795 *
1796 * @wowlan: WoWLAN support information
Johannes Bergd3236552009-04-20 14:31:42 +02001797 */
1798struct wiphy {
1799 /* assign these fields before you register the wiphy */
1800
Johannes Bergef15aac2010-01-20 12:02:33 +01001801 /* permanent MAC address(es) */
Johannes Bergd3236552009-04-20 14:31:42 +02001802 u8 perm_addr[ETH_ALEN];
Johannes Bergef15aac2010-01-20 12:02:33 +01001803 u8 addr_mask[ETH_ALEN];
1804
Johannes Bergef15aac2010-01-20 12:02:33 +01001805 struct mac_address *addresses;
Johannes Bergd3236552009-04-20 14:31:42 +02001806
Johannes Berg2e161f72010-08-12 15:38:38 +02001807 const struct ieee80211_txrx_stypes *mgmt_stypes;
1808
Johannes Berg7527a782011-05-13 10:58:57 +02001809 const struct ieee80211_iface_combination *iface_combinations;
1810 int n_iface_combinations;
1811 u16 software_iftypes;
1812
Johannes Berg2e161f72010-08-12 15:38:38 +02001813 u16 n_addresses;
1814
Johannes Bergd3236552009-04-20 14:31:42 +02001815 /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
1816 u16 interface_modes;
1817
Johannes Berg5be83de2009-11-19 00:56:28 +01001818 u32 flags;
Johannes Berg463d0182009-07-14 00:33:35 +02001819
Johannes Bergd3236552009-04-20 14:31:42 +02001820 enum cfg80211_signal_type signal_type;
1821
1822 int bss_priv_size;
1823 u8 max_scan_ssids;
Luciano Coelho93b6aa62011-07-13 14:57:28 +03001824 u8 max_sched_scan_ssids;
Johannes Bergd3236552009-04-20 14:31:42 +02001825 u16 max_scan_ie_len;
Luciano Coelho5a865ba2011-07-13 14:57:29 +03001826 u16 max_sched_scan_ie_len;
Johannes Bergd3236552009-04-20 14:31:42 +02001827
1828 int n_cipher_suites;
1829 const u32 *cipher_suites;
1830
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001831 u8 retry_short;
1832 u8 retry_long;
1833 u32 frag_threshold;
1834 u32 rts_threshold;
Lukáš Turek81077e82009-12-21 22:50:47 +01001835 u8 coverage_class;
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02001836
Kalle Valodfce95f2009-09-24 11:02:42 -07001837 char fw_version[ETHTOOL_BUSINFO_LEN];
1838 u32 hw_version;
1839
Johannes Bergff1b6e62011-05-04 15:37:28 +02001840 struct wiphy_wowlan_support wowlan;
1841
Johannes Berga2939112010-12-14 17:54:28 +01001842 u16 max_remain_on_channel_duration;
1843
Samuel Ortiz67fbb162009-11-24 23:59:15 +01001844 u8 max_num_pmkids;
1845
Bruno Randolf7f531e02010-12-16 11:30:22 +09001846 u32 available_antennas_tx;
1847 u32 available_antennas_rx;
Bruno Randolfa7ffac92010-12-08 13:59:24 +09001848
Johannes Bergd3236552009-04-20 14:31:42 +02001849 /* If multiple wiphys are registered and you're handed e.g.
1850 * a regular netdev with assigned ieee80211_ptr, you won't
1851 * know whether it points to a wiphy your driver has registered
1852 * or not. Assign this to something global to your driver to
1853 * help determine whether you own this wiphy or not. */
David Kilroycf5aa2f2009-05-16 23:13:47 +01001854 const void *privid;
Johannes Bergd3236552009-04-20 14:31:42 +02001855
1856 struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
1857
1858 /* Lets us get back the wiphy on the callback */
1859 int (*reg_notifier)(struct wiphy *wiphy,
1860 struct regulatory_request *request);
1861
1862 /* fields below are read-only, assigned by cfg80211 */
1863
1864 const struct ieee80211_regdomain *regd;
1865
1866 /* the item in /sys/class/ieee80211/ points to this,
1867 * you need use set_wiphy_dev() (see below) */
1868 struct device dev;
1869
Stanislaw Gruszkaecb44332011-08-12 14:00:59 +02001870 /* protects ->resume, ->suspend sysfs callbacks against unregister hw */
1871 bool registered;
1872
Johannes Bergd3236552009-04-20 14:31:42 +02001873 /* dir in debugfs: ieee80211/<wiphyname> */
1874 struct dentry *debugfsdir;
1875
Johannes Berg463d0182009-07-14 00:33:35 +02001876#ifdef CONFIG_NET_NS
1877 /* the network namespace this phy lives in currently */
1878 struct net *_net;
1879#endif
1880
Johannes Berg3d23e342009-09-29 23:27:28 +02001881#ifdef CONFIG_CFG80211_WEXT
1882 const struct iw_handler_def *wext;
1883#endif
1884
Johannes Bergd3236552009-04-20 14:31:42 +02001885 char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
1886};
1887
Johannes Berg463d0182009-07-14 00:33:35 +02001888static inline struct net *wiphy_net(struct wiphy *wiphy)
1889{
Eric Dumazetc2d9ba92010-06-01 06:51:19 +00001890 return read_pnet(&wiphy->_net);
Johannes Berg463d0182009-07-14 00:33:35 +02001891}
1892
1893static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
1894{
Eric Dumazetc2d9ba92010-06-01 06:51:19 +00001895 write_pnet(&wiphy->_net, net);
Johannes Berg463d0182009-07-14 00:33:35 +02001896}
Johannes Berg463d0182009-07-14 00:33:35 +02001897
Johannes Bergd3236552009-04-20 14:31:42 +02001898/**
1899 * wiphy_priv - return priv from wiphy
1900 *
1901 * @wiphy: the wiphy whose priv pointer to return
1902 */
1903static inline void *wiphy_priv(struct wiphy *wiphy)
1904{
1905 BUG_ON(!wiphy);
1906 return &wiphy->priv;
1907}
1908
1909/**
David Kilroyf1f74822009-06-18 23:21:13 +01001910 * priv_to_wiphy - return the wiphy containing the priv
1911 *
1912 * @priv: a pointer previously returned by wiphy_priv
1913 */
1914static inline struct wiphy *priv_to_wiphy(void *priv)
1915{
1916 BUG_ON(!priv);
1917 return container_of(priv, struct wiphy, priv);
1918}
1919
1920/**
Johannes Bergd3236552009-04-20 14:31:42 +02001921 * set_wiphy_dev - set device pointer for wiphy
1922 *
1923 * @wiphy: The wiphy whose device to bind
1924 * @dev: The device to parent it to
1925 */
1926static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
1927{
1928 wiphy->dev.parent = dev;
1929}
1930
1931/**
1932 * wiphy_dev - get wiphy dev pointer
1933 *
1934 * @wiphy: The wiphy whose device struct to look up
1935 */
1936static inline struct device *wiphy_dev(struct wiphy *wiphy)
1937{
1938 return wiphy->dev.parent;
1939}
1940
1941/**
1942 * wiphy_name - get wiphy name
1943 *
1944 * @wiphy: The wiphy whose name to return
1945 */
Joe Perchese1db74f2010-07-26 14:39:57 -07001946static inline const char *wiphy_name(const struct wiphy *wiphy)
Johannes Bergd3236552009-04-20 14:31:42 +02001947{
1948 return dev_name(&wiphy->dev);
1949}
1950
1951/**
1952 * wiphy_new - create a new wiphy for use with cfg80211
1953 *
1954 * @ops: The configuration operations for this device
1955 * @sizeof_priv: The size of the private area to allocate
1956 *
1957 * Create a new wiphy and associate the given operations with it.
1958 * @sizeof_priv bytes are allocated for private use.
1959 *
1960 * The returned pointer must be assigned to each netdev's
1961 * ieee80211_ptr for proper operation.
1962 */
David Kilroy3dcf6702009-05-16 23:13:46 +01001963struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
Johannes Bergd3236552009-04-20 14:31:42 +02001964
1965/**
1966 * wiphy_register - register a wiphy with cfg80211
1967 *
1968 * @wiphy: The wiphy to register.
1969 *
1970 * Returns a non-negative wiphy index or a negative error code.
1971 */
1972extern int wiphy_register(struct wiphy *wiphy);
1973
1974/**
1975 * wiphy_unregister - deregister a wiphy from cfg80211
1976 *
1977 * @wiphy: The wiphy to unregister.
1978 *
1979 * After this call, no more requests can be made with this priv
1980 * pointer, but the call may sleep to wait for an outstanding
1981 * request that is being handled.
1982 */
1983extern void wiphy_unregister(struct wiphy *wiphy);
1984
1985/**
1986 * wiphy_free - free wiphy
1987 *
1988 * @wiphy: The wiphy to free
1989 */
1990extern void wiphy_free(struct wiphy *wiphy);
1991
Johannes Bergfffd0932009-07-08 14:22:54 +02001992/* internal structs */
Johannes Berg6829c872009-07-02 09:13:27 +02001993struct cfg80211_conn;
Johannes Berg19957bb2009-07-02 17:20:43 +02001994struct cfg80211_internal_bss;
Johannes Bergfffd0932009-07-08 14:22:54 +02001995struct cfg80211_cached_keys;
Johannes Berg19957bb2009-07-02 17:20:43 +02001996
1997#define MAX_AUTH_BSSES 4
Johannes Berg6829c872009-07-02 09:13:27 +02001998
Johannes Bergd3236552009-04-20 14:31:42 +02001999/**
2000 * struct wireless_dev - wireless per-netdev state
2001 *
2002 * This structure must be allocated by the driver/stack
2003 * that uses the ieee80211_ptr field in struct net_device
2004 * (this is intentional so it can be allocated along with
2005 * the netdev.)
2006 *
2007 * @wiphy: pointer to hardware description
2008 * @iftype: interface type
2009 * @list: (private) Used to collect the interfaces
2010 * @netdev: (private) Used to reference back to the netdev
2011 * @current_bss: (private) Used by the internal configuration code
Johannes Bergf444de02010-05-05 15:25:02 +02002012 * @channel: (private) Used by the internal configuration code to track
2013 * user-set AP, monitor and WDS channels for wireless extensions
Johannes Bergd3236552009-04-20 14:31:42 +02002014 * @bssid: (private) Used by the internal configuration code
2015 * @ssid: (private) Used by the internal configuration code
2016 * @ssid_len: (private) Used by the internal configuration code
Johannes Berg29cbe682010-12-03 09:20:44 +01002017 * @mesh_id_len: (private) Used by the internal configuration code
2018 * @mesh_id_up_len: (private) Used by the internal configuration code
Johannes Bergd3236552009-04-20 14:31:42 +02002019 * @wext: (private) Used by the internal wireless extensions compat code
Johannes Berg9bc383d2009-11-19 11:55:19 +01002020 * @use_4addr: indicates 4addr mode is used on this interface, must be
2021 * set by driver (if supported) on add_interface BEFORE registering the
2022 * netdev and may otherwise be used by driver read-only, will be update
2023 * by cfg80211 on change_interface
Johannes Berg2e161f72010-08-12 15:38:38 +02002024 * @mgmt_registrations: list of registrations for management frames
2025 * @mgmt_registrations_lock: lock for the list
Johannes Bergabe37c42010-06-07 11:12:27 +02002026 * @mtx: mutex used to lock data in this struct
2027 * @cleanup_work: work struct used for cleanup that can't be done directly
Johannes Berg56d18932011-05-09 18:41:15 +02002028 * @beacon_interval: beacon interval used on this device for transmitting
2029 * beacons, 0 when not valid
Johannes Bergd3236552009-04-20 14:31:42 +02002030 */
2031struct wireless_dev {
2032 struct wiphy *wiphy;
2033 enum nl80211_iftype iftype;
2034
Johannes Berg667503d2009-07-07 03:56:11 +02002035 /* the remainder of this struct should be private to cfg80211 */
Johannes Bergd3236552009-04-20 14:31:42 +02002036 struct list_head list;
2037 struct net_device *netdev;
2038
Johannes Berg2e161f72010-08-12 15:38:38 +02002039 struct list_head mgmt_registrations;
2040 spinlock_t mgmt_registrations_lock;
Jouni Malinen026331c2010-02-15 12:53:10 +02002041
Johannes Berg667503d2009-07-07 03:56:11 +02002042 struct mutex mtx;
2043
Johannes Bergad002392009-08-18 19:51:57 +02002044 struct work_struct cleanup_work;
2045
Johannes Berg9bc383d2009-11-19 11:55:19 +01002046 bool use_4addr;
2047
Samuel Ortizb23aa672009-07-01 21:26:54 +02002048 /* currently used for IBSS and SME - might be rearranged later */
Johannes Bergd3236552009-04-20 14:31:42 +02002049 u8 ssid[IEEE80211_MAX_SSID_LEN];
Johannes Berg29cbe682010-12-03 09:20:44 +01002050 u8 ssid_len, mesh_id_len, mesh_id_up_len;
Samuel Ortizb23aa672009-07-01 21:26:54 +02002051 enum {
2052 CFG80211_SME_IDLE,
Johannes Berg6829c872009-07-02 09:13:27 +02002053 CFG80211_SME_CONNECTING,
Samuel Ortizb23aa672009-07-01 21:26:54 +02002054 CFG80211_SME_CONNECTED,
2055 } sme_state;
Johannes Berg6829c872009-07-02 09:13:27 +02002056 struct cfg80211_conn *conn;
Johannes Bergfffd0932009-07-08 14:22:54 +02002057 struct cfg80211_cached_keys *connect_keys;
Johannes Bergd3236552009-04-20 14:31:42 +02002058
Johannes Berg667503d2009-07-07 03:56:11 +02002059 struct list_head event_list;
2060 spinlock_t event_lock;
2061
Johannes Berg19957bb2009-07-02 17:20:43 +02002062 struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES];
2063 struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
2064 struct cfg80211_internal_bss *current_bss; /* associated / joined */
Johannes Bergf444de02010-05-05 15:25:02 +02002065 struct ieee80211_channel *channel;
Johannes Berg19957bb2009-07-02 17:20:43 +02002066
Kalle Valoffb9eb32010-02-17 17:58:10 +02002067 bool ps;
2068 int ps_timeout;
2069
Johannes Berg56d18932011-05-09 18:41:15 +02002070 int beacon_interval;
2071
Johannes Berg3d23e342009-09-29 23:27:28 +02002072#ifdef CONFIG_CFG80211_WEXT
Johannes Bergd3236552009-04-20 14:31:42 +02002073 /* wext data */
Johannes Bergcbe8fa92009-05-09 20:09:03 +02002074 struct {
Johannes Bergc238c8a2009-07-07 03:56:06 +02002075 struct cfg80211_ibss_params ibss;
2076 struct cfg80211_connect_params connect;
Johannes Bergfffd0932009-07-08 14:22:54 +02002077 struct cfg80211_cached_keys *keys;
Johannes Bergf2129352009-07-01 21:26:56 +02002078 u8 *ie;
2079 size_t ie_len;
Johannes Bergf401a6f2009-08-07 14:51:05 +02002080 u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
Johannes Bergf2129352009-07-01 21:26:56 +02002081 u8 ssid[IEEE80211_MAX_SSID_LEN];
Johannes Berg08645122009-05-11 13:54:58 +02002082 s8 default_key, default_mgmt_key;
Kalle Valoffb9eb32010-02-17 17:58:10 +02002083 bool prev_bssid_valid;
Johannes Bergcbe8fa92009-05-09 20:09:03 +02002084 } wext;
Johannes Bergd3236552009-04-20 14:31:42 +02002085#endif
2086};
2087
2088/**
2089 * wdev_priv - return wiphy priv from wireless_dev
2090 *
2091 * @wdev: The wireless device whose wiphy's priv pointer to return
2092 */
2093static inline void *wdev_priv(struct wireless_dev *wdev)
2094{
2095 BUG_ON(!wdev);
2096 return wiphy_priv(wdev->wiphy);
2097}
2098
Johannes Bergd70e9692010-08-19 16:11:27 +02002099/**
2100 * DOC: Utility functions
2101 *
2102 * cfg80211 offers a number of utility functions that can be useful.
Johannes Bergd3236552009-04-20 14:31:42 +02002103 */
2104
2105/**
2106 * ieee80211_channel_to_frequency - convert channel number to frequency
Johannes Bergabe37c42010-06-07 11:12:27 +02002107 * @chan: channel number
Bruno Randolf59eb21a2011-01-17 13:37:28 +09002108 * @band: band, necessary due to channel number overlap
Johannes Bergd3236552009-04-20 14:31:42 +02002109 */
Bruno Randolf59eb21a2011-01-17 13:37:28 +09002110extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band);
Johannes Bergd3236552009-04-20 14:31:42 +02002111
2112/**
2113 * ieee80211_frequency_to_channel - convert frequency to channel number
Johannes Bergabe37c42010-06-07 11:12:27 +02002114 * @freq: center frequency
Johannes Bergd3236552009-04-20 14:31:42 +02002115 */
2116extern int ieee80211_frequency_to_channel(int freq);
2117
2118/*
2119 * Name indirection necessary because the ieee80211 code also has
2120 * a function named "ieee80211_get_channel", so if you include
2121 * cfg80211's header file you get cfg80211's version, if you try
2122 * to include both header files you'll (rightfully!) get a symbol
2123 * clash.
2124 */
2125extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
2126 int freq);
2127/**
2128 * ieee80211_get_channel - get channel struct from wiphy for specified frequency
Johannes Bergabe37c42010-06-07 11:12:27 +02002129 * @wiphy: the struct wiphy to get the channel for
2130 * @freq: the center frequency of the channel
Johannes Bergd3236552009-04-20 14:31:42 +02002131 */
2132static inline struct ieee80211_channel *
2133ieee80211_get_channel(struct wiphy *wiphy, int freq)
2134{
2135 return __ieee80211_get_channel(wiphy, freq);
2136}
2137
2138/**
2139 * ieee80211_get_response_rate - get basic rate for a given rate
2140 *
2141 * @sband: the band to look for rates in
2142 * @basic_rates: bitmap of basic rates
2143 * @bitrate: the bitrate for which to find the basic rate
2144 *
2145 * This function returns the basic rate corresponding to a given
2146 * bitrate, that is the next lower bitrate contained in the basic
2147 * rate map, which is, for this function, given as a bitmap of
2148 * indices of rates in the band's bitrate table.
2149 */
2150struct ieee80211_rate *
2151ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
2152 u32 basic_rates, int bitrate);
2153
2154/*
2155 * Radiotap parsing functions -- for controlled injection support
2156 *
2157 * Implemented in net/wireless/radiotap.c
2158 * Documentation in Documentation/networking/radiotap-headers.txt
2159 */
2160
Johannes Berg33e5a2f2010-02-03 10:24:30 +01002161struct radiotap_align_size {
2162 uint8_t align:4, size:4;
2163};
2164
2165struct ieee80211_radiotap_namespace {
2166 const struct radiotap_align_size *align_size;
2167 int n_bits;
2168 uint32_t oui;
2169 uint8_t subns;
2170};
2171
2172struct ieee80211_radiotap_vendor_namespaces {
2173 const struct ieee80211_radiotap_namespace *ns;
2174 int n_ns;
2175};
2176
Johannes Bergd3236552009-04-20 14:31:42 +02002177/**
2178 * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
Johannes Berg33e5a2f2010-02-03 10:24:30 +01002179 * @this_arg_index: index of current arg, valid after each successful call
2180 * to ieee80211_radiotap_iterator_next()
2181 * @this_arg: pointer to current radiotap arg; it is valid after each
2182 * call to ieee80211_radiotap_iterator_next() but also after
2183 * ieee80211_radiotap_iterator_init() where it will point to
2184 * the beginning of the actual data portion
2185 * @this_arg_size: length of the current arg, for convenience
2186 * @current_namespace: pointer to the current namespace definition
2187 * (or internally %NULL if the current namespace is unknown)
2188 * @is_radiotap_ns: indicates whether the current namespace is the default
2189 * radiotap namespace or not
2190 *
Johannes Berg33e5a2f2010-02-03 10:24:30 +01002191 * @_rtheader: pointer to the radiotap header we are walking through
2192 * @_max_length: length of radiotap header in cpu byte ordering
2193 * @_arg_index: next argument index
2194 * @_arg: next argument pointer
2195 * @_next_bitmap: internal pointer to next present u32
2196 * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
2197 * @_vns: vendor namespace definitions
2198 * @_next_ns_data: beginning of the next namespace's data
2199 * @_reset_on_ext: internal; reset the arg index to 0 when going to the
2200 * next bitmap word
2201 *
2202 * Describes the radiotap parser state. Fields prefixed with an underscore
2203 * must not be used by users of the parser, only by the parser internally.
Johannes Bergd3236552009-04-20 14:31:42 +02002204 */
2205
2206struct ieee80211_radiotap_iterator {
Johannes Berg33e5a2f2010-02-03 10:24:30 +01002207 struct ieee80211_radiotap_header *_rtheader;
2208 const struct ieee80211_radiotap_vendor_namespaces *_vns;
2209 const struct ieee80211_radiotap_namespace *current_namespace;
Johannes Bergd3236552009-04-20 14:31:42 +02002210
Johannes Berg33e5a2f2010-02-03 10:24:30 +01002211 unsigned char *_arg, *_next_ns_data;
Johannes Berg67272442010-04-21 10:25:36 +02002212 __le32 *_next_bitmap;
Johannes Berg33e5a2f2010-02-03 10:24:30 +01002213
2214 unsigned char *this_arg;
2215 int this_arg_index;
2216 int this_arg_size;
2217
2218 int is_radiotap_ns;
2219
2220 int _max_length;
2221 int _arg_index;
2222 uint32_t _bitmap_shifter;
2223 int _reset_on_ext;
Johannes Bergd3236552009-04-20 14:31:42 +02002224};
2225
2226extern int ieee80211_radiotap_iterator_init(
Johannes Berg33e5a2f2010-02-03 10:24:30 +01002227 struct ieee80211_radiotap_iterator *iterator,
2228 struct ieee80211_radiotap_header *radiotap_header,
2229 int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns);
Johannes Bergd3236552009-04-20 14:31:42 +02002230
2231extern int ieee80211_radiotap_iterator_next(
Johannes Berg33e5a2f2010-02-03 10:24:30 +01002232 struct ieee80211_radiotap_iterator *iterator);
2233
Johannes Bergd3236552009-04-20 14:31:42 +02002234
Zhu Yie31a16d2009-05-21 21:47:03 +08002235extern const unsigned char rfc1042_header[6];
2236extern const unsigned char bridge_tunnel_header[6];
2237
2238/**
2239 * ieee80211_get_hdrlen_from_skb - get header length from data
2240 *
2241 * Given an skb with a raw 802.11 header at the data pointer this function
2242 * returns the 802.11 header length in bytes (not including encryption
2243 * headers). If the data in the sk_buff is too short to contain a valid 802.11
2244 * header the function returns 0.
2245 *
2246 * @skb: the frame
2247 */
2248unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
2249
2250/**
2251 * ieee80211_hdrlen - get header length in bytes from frame control
2252 * @fc: frame control field in little-endian format
2253 */
Johannes Berg633adf12010-08-12 14:49:58 +02002254unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
Zhu Yie31a16d2009-05-21 21:47:03 +08002255
2256/**
Johannes Bergd70e9692010-08-19 16:11:27 +02002257 * DOC: Data path helpers
2258 *
2259 * In addition to generic utilities, cfg80211 also offers
2260 * functions that help implement the data path for devices
2261 * that do not do the 802.11/802.3 conversion on the device.
2262 */
2263
2264/**
Zhu Yie31a16d2009-05-21 21:47:03 +08002265 * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
2266 * @skb: the 802.11 data frame
2267 * @addr: the device MAC address
2268 * @iftype: the virtual interface type
2269 */
Zhu Yieaf85ca2009-12-01 10:18:37 +08002270int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
Zhu Yie31a16d2009-05-21 21:47:03 +08002271 enum nl80211_iftype iftype);
2272
2273/**
2274 * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11
2275 * @skb: the 802.3 frame
2276 * @addr: the device MAC address
2277 * @iftype: the virtual interface type
2278 * @bssid: the network bssid (used only for iftype STATION and ADHOC)
2279 * @qos: build 802.11 QoS data frame
2280 */
Zhu Yieaf85ca2009-12-01 10:18:37 +08002281int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
Zhu Yie31a16d2009-05-21 21:47:03 +08002282 enum nl80211_iftype iftype, u8 *bssid, bool qos);
2283
2284/**
Zhu Yieaf85ca2009-12-01 10:18:37 +08002285 * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame
2286 *
2287 * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of
2288 * 802.3 frames. The @list will be empty if the decode fails. The
2289 * @skb is consumed after the function returns.
2290 *
2291 * @skb: The input IEEE 802.11n A-MSDU frame.
2292 * @list: The output list of 802.3 frames. It must be allocated and
2293 * initialized by by the caller.
2294 * @addr: The device MAC address.
2295 * @iftype: The device interface type.
2296 * @extra_headroom: The hardware extra headroom for SKBs in the @list.
Yogesh Ashok Powar8b3beca2011-05-13 11:22:31 -07002297 * @has_80211_header: Set it true if SKB is with IEEE 802.11 header.
Zhu Yieaf85ca2009-12-01 10:18:37 +08002298 */
2299void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
2300 const u8 *addr, enum nl80211_iftype iftype,
Yogesh Ashok Powar8b3beca2011-05-13 11:22:31 -07002301 const unsigned int extra_headroom,
2302 bool has_80211_header);
Zhu Yieaf85ca2009-12-01 10:18:37 +08002303
2304/**
Zhu Yie31a16d2009-05-21 21:47:03 +08002305 * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
2306 * @skb: the data frame
2307 */
2308unsigned int cfg80211_classify8021d(struct sk_buff *skb);
2309
Johannes Bergc21dbf92010-01-26 14:15:46 +01002310/**
2311 * cfg80211_find_ie - find information element in data
2312 *
2313 * @eid: element ID
2314 * @ies: data consisting of IEs
2315 * @len: length of data
2316 *
2317 * This function will return %NULL if the element ID could
2318 * not be found or if the element is invalid (claims to be
2319 * longer than the given data), or a pointer to the first byte
2320 * of the requested element, that is the byte containing the
2321 * element ID. There are no checks on the element length
2322 * other than having to fit into the given data.
2323 */
2324const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
2325
Johannes Bergd70e9692010-08-19 16:11:27 +02002326/**
2327 * DOC: Regulatory enforcement infrastructure
2328 *
2329 * TODO
Johannes Bergd3236552009-04-20 14:31:42 +02002330 */
2331
2332/**
2333 * regulatory_hint - driver hint to the wireless core a regulatory domain
2334 * @wiphy: the wireless device giving the hint (used only for reporting
2335 * conflicts)
2336 * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
2337 * should be in. If @rd is set this should be NULL. Note that if you
2338 * set this to NULL you should still set rd->alpha2 to some accepted
2339 * alpha2.
2340 *
2341 * Wireless drivers can use this function to hint to the wireless core
2342 * what it believes should be the current regulatory domain by
2343 * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
2344 * domain should be in or by providing a completely build regulatory domain.
2345 * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
2346 * for a regulatory domain structure for the respective country.
2347 *
2348 * The wiphy must have been registered to cfg80211 prior to this call.
2349 * For cfg80211 drivers this means you must first use wiphy_register(),
2350 * for mac80211 drivers you must first use ieee80211_register_hw().
2351 *
2352 * Drivers should check the return value, its possible you can get
2353 * an -ENOMEM.
2354 */
2355extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
2356
2357/**
Johannes Bergd3236552009-04-20 14:31:42 +02002358 * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
2359 * @wiphy: the wireless device we want to process the regulatory domain on
2360 * @regd: the custom regulatory domain to use for this wiphy
2361 *
2362 * Drivers can sometimes have custom regulatory domains which do not apply
2363 * to a specific country. Drivers can use this to apply such custom regulatory
2364 * domains. This routine must be called prior to wiphy registration. The
2365 * custom regulatory domain will be trusted completely and as such previous
2366 * default channel settings will be disregarded. If no rule is found for a
2367 * channel on the regulatory domain the channel will be disabled.
2368 */
2369extern void wiphy_apply_custom_regulatory(
2370 struct wiphy *wiphy,
2371 const struct ieee80211_regdomain *regd);
2372
2373/**
2374 * freq_reg_info - get regulatory information for the given frequency
2375 * @wiphy: the wiphy for which we want to process this rule for
2376 * @center_freq: Frequency in KHz for which we want regulatory information for
Luis R. Rodriguez038659e2009-05-02 00:37:17 -04002377 * @desired_bw_khz: the desired max bandwidth you want to use per
2378 * channel. Note that this is still 20 MHz if you want to use HT40
2379 * as HT40 makes use of two channels for its 40 MHz width bandwidth.
2380 * If set to 0 we'll assume you want the standard 20 MHz.
Johannes Bergd3236552009-04-20 14:31:42 +02002381 * @reg_rule: the regulatory rule which we have for this frequency
2382 *
2383 * Use this function to get the regulatory rule for a specific frequency on
2384 * a given wireless device. If the device has a specific regulatory domain
2385 * it wants to follow we respect that unless a country IE has been received
2386 * and processed already.
2387 *
2388 * Returns 0 if it was able to find a valid regulatory rule which does
2389 * apply to the given center_freq otherwise it returns non-zero. It will
2390 * also return -ERANGE if we determine the given center_freq does not even have
2391 * a regulatory rule for a frequency range in the center_freq's band. See
2392 * freq_in_rule_band() for our current definition of a band -- this is purely
2393 * subjective and right now its 802.11 specific.
2394 */
Luis R. Rodriguez038659e2009-05-02 00:37:17 -04002395extern int freq_reg_info(struct wiphy *wiphy,
2396 u32 center_freq,
2397 u32 desired_bw_khz,
Johannes Bergd3236552009-04-20 14:31:42 +02002398 const struct ieee80211_reg_rule **reg_rule);
2399
2400/*
2401 * Temporary wext handlers & helper functions
2402 *
2403 * In the future cfg80211 will simply assign the entire wext handler
2404 * structure to netdevs it manages, but we're not there yet.
2405 */
Johannes Bergfee52672008-11-26 22:36:31 +01002406int cfg80211_wext_giwname(struct net_device *dev,
2407 struct iw_request_info *info,
2408 char *name, char *extra);
Johannes Berge60c7742008-11-26 23:31:40 +01002409int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
2410 u32 *mode, char *extra);
2411int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
2412 u32 *mode, char *extra);
Johannes Berg2a519312009-02-10 21:25:55 +01002413int cfg80211_wext_siwscan(struct net_device *dev,
2414 struct iw_request_info *info,
2415 union iwreq_data *wrqu, char *extra);
2416int cfg80211_wext_giwscan(struct net_device *dev,
2417 struct iw_request_info *info,
2418 struct iw_point *data, char *extra);
Johannes Berg691597c2009-04-19 19:57:45 +02002419int cfg80211_wext_siwmlme(struct net_device *dev,
2420 struct iw_request_info *info,
2421 struct iw_point *data, char *extra);
Johannes Berg4aa188e2009-02-18 19:32:08 +01002422int cfg80211_wext_giwrange(struct net_device *dev,
2423 struct iw_request_info *info,
2424 struct iw_point *data, char *extra);
Johannes Bergf2129352009-07-01 21:26:56 +02002425int cfg80211_wext_siwgenie(struct net_device *dev,
2426 struct iw_request_info *info,
2427 struct iw_point *data, char *extra);
2428int cfg80211_wext_siwauth(struct net_device *dev,
2429 struct iw_request_info *info,
2430 struct iw_param *data, char *extra);
2431int cfg80211_wext_giwauth(struct net_device *dev,
2432 struct iw_request_info *info,
2433 struct iw_param *data, char *extra);
2434
Johannes Berg0e82ffe2009-07-27 12:01:50 +02002435int cfg80211_wext_siwfreq(struct net_device *dev,
2436 struct iw_request_info *info,
2437 struct iw_freq *freq, char *extra);
2438int cfg80211_wext_giwfreq(struct net_device *dev,
2439 struct iw_request_info *info,
2440 struct iw_freq *freq, char *extra);
Johannes Berg1f9298f2009-07-27 12:01:52 +02002441int cfg80211_wext_siwessid(struct net_device *dev,
2442 struct iw_request_info *info,
2443 struct iw_point *data, char *ssid);
2444int cfg80211_wext_giwessid(struct net_device *dev,
2445 struct iw_request_info *info,
2446 struct iw_point *data, char *ssid);
Johannes Berg99303802009-07-01 21:26:59 +02002447int cfg80211_wext_siwrate(struct net_device *dev,
2448 struct iw_request_info *info,
2449 struct iw_param *rate, char *extra);
2450int cfg80211_wext_giwrate(struct net_device *dev,
2451 struct iw_request_info *info,
2452 struct iw_param *rate, char *extra);
2453
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02002454int cfg80211_wext_siwrts(struct net_device *dev,
2455 struct iw_request_info *info,
2456 struct iw_param *rts, char *extra);
2457int cfg80211_wext_giwrts(struct net_device *dev,
2458 struct iw_request_info *info,
2459 struct iw_param *rts, char *extra);
2460int cfg80211_wext_siwfrag(struct net_device *dev,
2461 struct iw_request_info *info,
2462 struct iw_param *frag, char *extra);
2463int cfg80211_wext_giwfrag(struct net_device *dev,
2464 struct iw_request_info *info,
2465 struct iw_param *frag, char *extra);
2466int cfg80211_wext_siwretry(struct net_device *dev,
2467 struct iw_request_info *info,
2468 struct iw_param *retry, char *extra);
2469int cfg80211_wext_giwretry(struct net_device *dev,
2470 struct iw_request_info *info,
2471 struct iw_param *retry, char *extra);
Johannes Berg08645122009-05-11 13:54:58 +02002472int cfg80211_wext_siwencodeext(struct net_device *dev,
2473 struct iw_request_info *info,
2474 struct iw_point *erq, char *extra);
2475int cfg80211_wext_siwencode(struct net_device *dev,
2476 struct iw_request_info *info,
2477 struct iw_point *erq, char *keybuf);
2478int cfg80211_wext_giwencode(struct net_device *dev,
2479 struct iw_request_info *info,
2480 struct iw_point *erq, char *keybuf);
Johannes Berg7643a2c2009-06-02 13:01:39 +02002481int cfg80211_wext_siwtxpower(struct net_device *dev,
2482 struct iw_request_info *info,
2483 union iwreq_data *data, char *keybuf);
2484int cfg80211_wext_giwtxpower(struct net_device *dev,
2485 struct iw_request_info *info,
2486 union iwreq_data *data, char *keybuf);
Johannes Berg89906462009-07-01 21:27:00 +02002487struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev);
Jouni Malinenb9a5f8ca2009-04-20 18:39:05 +02002488
Johannes Bergbc92afd2009-07-01 21:26:57 +02002489int cfg80211_wext_siwpower(struct net_device *dev,
2490 struct iw_request_info *info,
2491 struct iw_param *wrq, char *extra);
2492int cfg80211_wext_giwpower(struct net_device *dev,
2493 struct iw_request_info *info,
2494 struct iw_param *wrq, char *extra);
2495
Johannes Berg562e4822009-07-27 12:01:51 +02002496int cfg80211_wext_siwap(struct net_device *dev,
2497 struct iw_request_info *info,
2498 struct sockaddr *ap_addr, char *extra);
2499int cfg80211_wext_giwap(struct net_device *dev,
2500 struct iw_request_info *info,
2501 struct sockaddr *ap_addr, char *extra);
Johannes Bergab737a42009-07-01 21:26:58 +02002502
John W. Linvillec28991a2010-07-20 12:22:40 -04002503int cfg80211_wext_siwpmksa(struct net_device *dev,
2504 struct iw_request_info *info,
2505 struct iw_point *data, char *extra);
2506
Johannes Bergd3236552009-04-20 14:31:42 +02002507/*
2508 * callbacks for asynchronous cfg80211 methods, notification
2509 * functions and BSS handling helpers
2510 */
2511
Johannes Berg2a519312009-02-10 21:25:55 +01002512/**
2513 * cfg80211_scan_done - notify that scan finished
2514 *
2515 * @request: the corresponding scan request
2516 * @aborted: set to true if the scan was aborted for any reason,
2517 * userspace will be notified of that
2518 */
2519void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
2520
2521/**
Luciano Coelho807f8a82011-05-11 17:09:35 +03002522 * cfg80211_sched_scan_results - notify that new scan results are available
2523 *
2524 * @wiphy: the wiphy which got scheduled scan results
2525 */
2526void cfg80211_sched_scan_results(struct wiphy *wiphy);
2527
2528/**
2529 * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
2530 *
2531 * @wiphy: the wiphy on which the scheduled scan stopped
2532 *
2533 * The driver can call this function to inform cfg80211 that the
2534 * scheduled scan had to be stopped, for whatever reason. The driver
2535 * is then called back via the sched_scan_stop operation when done.
2536 */
2537void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
2538
2539/**
Johannes Bergabe37c42010-06-07 11:12:27 +02002540 * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame
Johannes Berg2a519312009-02-10 21:25:55 +01002541 *
2542 * @wiphy: the wiphy reporting the BSS
Johannes Bergabe37c42010-06-07 11:12:27 +02002543 * @channel: The channel the frame was received on
2544 * @mgmt: the management frame (probe response or beacon)
2545 * @len: length of the management frame
Johannes Berg77965c92009-02-18 18:45:06 +01002546 * @signal: the signal strength, type depends on the wiphy's signal_type
Johannes Berg2a519312009-02-10 21:25:55 +01002547 * @gfp: context flags
2548 *
2549 * This informs cfg80211 that BSS information was found and
2550 * the BSS should be updated/added.
2551 */
2552struct cfg80211_bss*
2553cfg80211_inform_bss_frame(struct wiphy *wiphy,
2554 struct ieee80211_channel *channel,
2555 struct ieee80211_mgmt *mgmt, size_t len,
Johannes Berg77965c92009-02-18 18:45:06 +01002556 s32 signal, gfp_t gfp);
Johannes Berg2a519312009-02-10 21:25:55 +01002557
Johannes Bergabe37c42010-06-07 11:12:27 +02002558/**
2559 * cfg80211_inform_bss - inform cfg80211 of a new BSS
2560 *
2561 * @wiphy: the wiphy reporting the BSS
2562 * @channel: The channel the frame was received on
2563 * @bssid: the BSSID of the BSS
2564 * @timestamp: the TSF timestamp sent by the peer
2565 * @capability: the capability field sent by the peer
2566 * @beacon_interval: the beacon interval announced by the peer
2567 * @ie: additional IEs sent by the peer
2568 * @ielen: length of the additional IEs
2569 * @signal: the signal strength, type depends on the wiphy's signal_type
2570 * @gfp: context flags
2571 *
2572 * This informs cfg80211 that BSS information was found and
2573 * the BSS should be updated/added.
2574 */
Jussi Kivilinna06aa7af2009-03-26 23:40:09 +02002575struct cfg80211_bss*
2576cfg80211_inform_bss(struct wiphy *wiphy,
2577 struct ieee80211_channel *channel,
2578 const u8 *bssid,
2579 u64 timestamp, u16 capability, u16 beacon_interval,
2580 const u8 *ie, size_t ielen,
2581 s32 signal, gfp_t gfp);
2582
Johannes Berg2a519312009-02-10 21:25:55 +01002583struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
2584 struct ieee80211_channel *channel,
2585 const u8 *bssid,
Johannes Berg79420f02009-02-10 21:25:59 +01002586 const u8 *ssid, size_t ssid_len,
2587 u16 capa_mask, u16 capa_val);
2588static inline struct cfg80211_bss *
2589cfg80211_get_ibss(struct wiphy *wiphy,
2590 struct ieee80211_channel *channel,
2591 const u8 *ssid, size_t ssid_len)
2592{
2593 return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
2594 WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
2595}
2596
Johannes Berg2a519312009-02-10 21:25:55 +01002597struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
2598 struct ieee80211_channel *channel,
2599 const u8 *meshid, size_t meshidlen,
2600 const u8 *meshcfg);
2601void cfg80211_put_bss(struct cfg80211_bss *bss);
Johannes Bergd3236552009-04-20 14:31:42 +02002602
Johannes Bergd491af12009-02-10 21:25:58 +01002603/**
2604 * cfg80211_unlink_bss - unlink BSS from internal data structures
2605 * @wiphy: the wiphy
2606 * @bss: the bss to remove
2607 *
2608 * This function removes the given BSS from the internal data structures
2609 * thereby making it no longer show up in scan results etc. Use this
2610 * function when you detect a BSS is gone. Normally BSSes will also time
2611 * out, so it is not necessary to use this function at all.
2612 */
2613void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
Johannes Bergfee52672008-11-26 22:36:31 +01002614
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002615/**
2616 * cfg80211_send_rx_auth - notification of processed authentication
2617 * @dev: network device
2618 * @buf: authentication frame (header + body)
2619 * @len: length of the frame data
2620 *
2621 * This function is called whenever an authentication has been processed in
Jouni Malinen1965c852009-04-22 21:38:25 +03002622 * station mode. The driver is required to call either this function or
2623 * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002624 * call. This function may sleep.
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002625 */
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002626void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002627
2628/**
Jouni Malinen1965c852009-04-22 21:38:25 +03002629 * cfg80211_send_auth_timeout - notification of timed out authentication
2630 * @dev: network device
2631 * @addr: The MAC address of the device with which the authentication timed out
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002632 *
2633 * This function may sleep.
Jouni Malinen1965c852009-04-22 21:38:25 +03002634 */
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002635void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
Jouni Malinen1965c852009-04-22 21:38:25 +03002636
2637/**
Johannes Berga58ce432009-11-19 12:45:42 +01002638 * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled
2639 * @dev: network device
2640 * @addr: The MAC address of the device with which the authentication timed out
2641 *
2642 * When a pending authentication had no action yet, the driver may decide
2643 * to not send a deauth frame, but in that case must calls this function
2644 * to tell cfg80211 about this decision. It is only valid to call this
2645 * function within the deauth() callback.
2646 */
2647void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr);
2648
2649/**
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002650 * cfg80211_send_rx_assoc - notification of processed association
2651 * @dev: network device
2652 * @buf: (re)association response frame (header + body)
2653 * @len: length of the frame data
2654 *
2655 * This function is called whenever a (re)association response has been
Jouni Malinen1965c852009-04-22 21:38:25 +03002656 * processed in station mode. The driver is required to call either this
2657 * function or cfg80211_send_assoc_timeout() to indicate the result of
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002658 * cfg80211_ops::assoc() call. This function may sleep.
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002659 */
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002660void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002661
2662/**
Jouni Malinen1965c852009-04-22 21:38:25 +03002663 * cfg80211_send_assoc_timeout - notification of timed out association
2664 * @dev: network device
2665 * @addr: The MAC address of the device with which the association timed out
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002666 *
2667 * This function may sleep.
Jouni Malinen1965c852009-04-22 21:38:25 +03002668 */
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002669void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
Jouni Malinen1965c852009-04-22 21:38:25 +03002670
2671/**
Jouni Malinen53b46b82009-03-27 20:53:56 +02002672 * cfg80211_send_deauth - notification of processed deauthentication
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002673 * @dev: network device
2674 * @buf: deauthentication frame (header + body)
2675 * @len: length of the frame data
2676 *
2677 * This function is called whenever deauthentication has been processed in
Jouni Malinen53b46b82009-03-27 20:53:56 +02002678 * station mode. This includes both received deauthentication frames and
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002679 * locally generated ones. This function may sleep.
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002680 */
Holger Schurigce470613c2009-10-13 13:28:13 +02002681void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
2682
2683/**
2684 * __cfg80211_send_deauth - notification of processed deauthentication
2685 * @dev: network device
2686 * @buf: deauthentication frame (header + body)
2687 * @len: length of the frame data
2688 *
2689 * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
2690 */
2691void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002692
2693/**
Jouni Malinen53b46b82009-03-27 20:53:56 +02002694 * cfg80211_send_disassoc - notification of processed disassociation
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002695 * @dev: network device
2696 * @buf: disassociation response frame (header + body)
2697 * @len: length of the frame data
2698 *
2699 * This function is called whenever disassociation has been processed in
Jouni Malinen53b46b82009-03-27 20:53:56 +02002700 * station mode. This includes both received disassociation frames and locally
Johannes Bergcb0b4be2009-07-07 03:56:07 +02002701 * generated ones. This function may sleep.
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002702 */
Holger Schurigce470613c2009-10-13 13:28:13 +02002703void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
2704
2705/**
2706 * __cfg80211_send_disassoc - notification of processed disassociation
2707 * @dev: network device
2708 * @buf: disassociation response frame (header + body)
2709 * @len: length of the frame data
2710 *
2711 * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
2712 */
2713void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
2714 size_t len);
Jouni Malinen6039f6d2009-03-19 13:39:21 +02002715
Kalle Valoa08c1c12009-03-22 21:57:28 +02002716/**
Jouni Malinencf4e5942010-12-16 00:52:40 +02002717 * cfg80211_send_unprot_deauth - notification of unprotected deauthentication
2718 * @dev: network device
2719 * @buf: deauthentication frame (header + body)
2720 * @len: length of the frame data
2721 *
2722 * This function is called whenever a received Deauthentication frame has been
2723 * dropped in station mode because of MFP being used but the Deauthentication
2724 * frame was not protected. This function may sleep.
2725 */
2726void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf,
2727 size_t len);
2728
2729/**
2730 * cfg80211_send_unprot_disassoc - notification of unprotected disassociation
2731 * @dev: network device
2732 * @buf: disassociation frame (header + body)
2733 * @len: length of the frame data
2734 *
2735 * This function is called whenever a received Disassociation frame has been
2736 * dropped in station mode because of MFP being used but the Disassociation
2737 * frame was not protected. This function may sleep.
2738 */
2739void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf,
2740 size_t len);
2741
2742/**
Jouni Malinena3b8b052009-03-27 21:59:49 +02002743 * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
2744 * @dev: network device
2745 * @addr: The source MAC address of the frame
2746 * @key_type: The key type that the received frame used
Arik Nemtsova66b98d2011-06-23 00:00:24 +03002747 * @key_id: Key identifier (0..3). Can be -1 if missing.
Jouni Malinena3b8b052009-03-27 21:59:49 +02002748 * @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
Johannes Berge6d6e342009-07-01 21:26:47 +02002749 * @gfp: allocation flags
Jouni Malinena3b8b052009-03-27 21:59:49 +02002750 *
2751 * This function is called whenever the local MAC detects a MIC failure in a
2752 * received frame. This matches with MLME-MICHAELMICFAILURE.indication()
2753 * primitive.
2754 */
2755void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
2756 enum nl80211_key_type key_type, int key_id,
Johannes Berge6d6e342009-07-01 21:26:47 +02002757 const u8 *tsc, gfp_t gfp);
Jouni Malinena3b8b052009-03-27 21:59:49 +02002758
Johannes Berg04a773a2009-04-19 21:24:32 +02002759/**
2760 * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
2761 *
2762 * @dev: network device
2763 * @bssid: the BSSID of the IBSS joined
2764 * @gfp: allocation flags
2765 *
2766 * This function notifies cfg80211 that the device joined an IBSS or
2767 * switched to a different BSSID. Before this function can be called,
2768 * either a beacon has to have been received from the IBSS, or one of
2769 * the cfg80211_inform_bss{,_frame} functions must have been called
2770 * with the locally generated beacon -- this guarantees that there is
2771 * always a scan result for this IBSS. cfg80211 will handle the rest.
2772 */
2773void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
2774
Johannes Berg1f87f7d2009-06-02 13:01:41 +02002775/**
Javier Cardonac93b5e72011-04-07 15:08:34 -07002776 * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
2777 *
2778 * @dev: network device
2779 * @macaddr: the MAC address of the new candidate
2780 * @ie: information elements advertised by the peer candidate
2781 * @ie_len: lenght of the information elements buffer
2782 * @gfp: allocation flags
2783 *
2784 * This function notifies cfg80211 that the mesh peer candidate has been
2785 * detected, most likely via a beacon or, less likely, via a probe response.
2786 * cfg80211 then sends a notification to userspace.
2787 */
2788void cfg80211_notify_new_peer_candidate(struct net_device *dev,
2789 const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp);
2790
2791/**
Johannes Bergd70e9692010-08-19 16:11:27 +02002792 * DOC: RFkill integration
2793 *
2794 * RFkill integration in cfg80211 is almost invisible to drivers,
2795 * as cfg80211 automatically registers an rfkill instance for each
2796 * wireless device it knows about. Soft kill is also translated
2797 * into disconnecting and turning all interfaces off, drivers are
2798 * expected to turn off the device when all interfaces are down.
2799 *
2800 * However, devices may have a hard RFkill line, in which case they
2801 * also need to interact with the rfkill subsystem, via cfg80211.
2802 * They can do this with a few helper functions documented here.
2803 */
2804
2805/**
Johannes Berg1f87f7d2009-06-02 13:01:41 +02002806 * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
2807 * @wiphy: the wiphy
2808 * @blocked: block status
2809 */
2810void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked);
2811
2812/**
2813 * wiphy_rfkill_start_polling - start polling rfkill
2814 * @wiphy: the wiphy
2815 */
2816void wiphy_rfkill_start_polling(struct wiphy *wiphy);
2817
2818/**
2819 * wiphy_rfkill_stop_polling - stop polling rfkill
2820 * @wiphy: the wiphy
2821 */
2822void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
2823
Johannes Bergaff89a92009-07-01 21:26:51 +02002824#ifdef CONFIG_NL80211_TESTMODE
2825/**
Johannes Bergd70e9692010-08-19 16:11:27 +02002826 * DOC: Test mode
2827 *
2828 * Test mode is a set of utility functions to allow drivers to
2829 * interact with driver-specific tools to aid, for instance,
2830 * factory programming.
2831 *
2832 * This chapter describes how drivers interact with it, for more
2833 * information see the nl80211 book's chapter on it.
2834 */
2835
2836/**
Johannes Bergaff89a92009-07-01 21:26:51 +02002837 * cfg80211_testmode_alloc_reply_skb - allocate testmode reply
2838 * @wiphy: the wiphy
2839 * @approxlen: an upper bound of the length of the data that will
2840 * be put into the skb
2841 *
2842 * This function allocates and pre-fills an skb for a reply to
2843 * the testmode command. Since it is intended for a reply, calling
2844 * it outside of the @testmode_cmd operation is invalid.
2845 *
2846 * The returned skb (or %NULL if any errors happen) is pre-filled
2847 * with the wiphy index and set up in a way that any data that is
2848 * put into the skb (with skb_put(), nla_put() or similar) will end
2849 * up being within the %NL80211_ATTR_TESTDATA attribute, so all that
2850 * needs to be done with the skb is adding data for the corresponding
2851 * userspace tool which can then read that data out of the testdata
2852 * attribute. You must not modify the skb in any other way.
2853 *
2854 * When done, call cfg80211_testmode_reply() with the skb and return
2855 * its error code as the result of the @testmode_cmd operation.
2856 */
2857struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
2858 int approxlen);
2859
2860/**
2861 * cfg80211_testmode_reply - send the reply skb
2862 * @skb: The skb, must have been allocated with
2863 * cfg80211_testmode_alloc_reply_skb()
2864 *
2865 * Returns an error code or 0 on success, since calling this
2866 * function will usually be the last thing before returning
2867 * from the @testmode_cmd you should return the error code.
2868 * Note that this function consumes the skb regardless of the
2869 * return value.
2870 */
2871int cfg80211_testmode_reply(struct sk_buff *skb);
2872
2873/**
2874 * cfg80211_testmode_alloc_event_skb - allocate testmode event
2875 * @wiphy: the wiphy
2876 * @approxlen: an upper bound of the length of the data that will
2877 * be put into the skb
2878 * @gfp: allocation flags
2879 *
2880 * This function allocates and pre-fills an skb for an event on the
2881 * testmode multicast group.
2882 *
2883 * The returned skb (or %NULL if any errors happen) is set up in the
2884 * same way as with cfg80211_testmode_alloc_reply_skb() but prepared
2885 * for an event. As there, you should simply add data to it that will
2886 * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
2887 * not modify the skb in any other way.
2888 *
2889 * When done filling the skb, call cfg80211_testmode_event() with the
2890 * skb to send the event.
2891 */
2892struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
2893 int approxlen, gfp_t gfp);
2894
2895/**
2896 * cfg80211_testmode_event - send the event
2897 * @skb: The skb, must have been allocated with
2898 * cfg80211_testmode_alloc_event_skb()
2899 * @gfp: allocation flags
2900 *
2901 * This function sends the given @skb, which must have been allocated
2902 * by cfg80211_testmode_alloc_event_skb(), as an event. It always
2903 * consumes it.
2904 */
2905void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp);
2906
2907#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd),
Wey-Yi Guy71063f02011-05-20 09:05:54 -07002908#define CFG80211_TESTMODE_DUMP(cmd) .testmode_dump = (cmd),
Johannes Bergaff89a92009-07-01 21:26:51 +02002909#else
2910#define CFG80211_TESTMODE_CMD(cmd)
Wey-Yi Guy71063f02011-05-20 09:05:54 -07002911#define CFG80211_TESTMODE_DUMP(cmd)
Johannes Bergaff89a92009-07-01 21:26:51 +02002912#endif
2913
Samuel Ortizb23aa672009-07-01 21:26:54 +02002914/**
2915 * cfg80211_connect_result - notify cfg80211 of connection result
2916 *
2917 * @dev: network device
2918 * @bssid: the BSSID of the AP
2919 * @req_ie: association request IEs (maybe be %NULL)
2920 * @req_ie_len: association request IEs length
2921 * @resp_ie: association response IEs (may be %NULL)
2922 * @resp_ie_len: assoc response IEs length
2923 * @status: status code, 0 for successful connection, use
2924 * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
2925 * the real status code for failures.
2926 * @gfp: allocation flags
2927 *
2928 * It should be called by the underlying driver whenever connect() has
2929 * succeeded.
2930 */
2931void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
2932 const u8 *req_ie, size_t req_ie_len,
2933 const u8 *resp_ie, size_t resp_ie_len,
2934 u16 status, gfp_t gfp);
2935
2936/**
2937 * cfg80211_roamed - notify cfg80211 of roaming
2938 *
2939 * @dev: network device
Jouni Malinened9d0102011-05-16 19:40:15 +03002940 * @channel: the channel of the new AP
Samuel Ortizb23aa672009-07-01 21:26:54 +02002941 * @bssid: the BSSID of the new AP
2942 * @req_ie: association request IEs (maybe be %NULL)
2943 * @req_ie_len: association request IEs length
2944 * @resp_ie: association response IEs (may be %NULL)
2945 * @resp_ie_len: assoc response IEs length
2946 * @gfp: allocation flags
2947 *
2948 * It should be called by the underlying driver whenever it roamed
2949 * from one AP to another while connected.
2950 */
Jouni Malinened9d0102011-05-16 19:40:15 +03002951void cfg80211_roamed(struct net_device *dev,
2952 struct ieee80211_channel *channel,
2953 const u8 *bssid,
Samuel Ortizb23aa672009-07-01 21:26:54 +02002954 const u8 *req_ie, size_t req_ie_len,
2955 const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
2956
2957/**
2958 * cfg80211_disconnected - notify cfg80211 that connection was dropped
2959 *
2960 * @dev: network device
2961 * @ie: information elements of the deauth/disassoc frame (may be %NULL)
2962 * @ie_len: length of IEs
2963 * @reason: reason code for the disconnection, set it to 0 if unknown
2964 * @gfp: allocation flags
2965 *
2966 * After it calls this function, the driver should enter an idle state
2967 * and not try to connect to any AP any more.
2968 */
2969void cfg80211_disconnected(struct net_device *dev, u16 reason,
2970 u8 *ie, size_t ie_len, gfp_t gfp);
2971
Jouni Malinen9588bbd2009-12-23 13:15:41 +01002972/**
2973 * cfg80211_ready_on_channel - notification of remain_on_channel start
2974 * @dev: network device
2975 * @cookie: the request cookie
2976 * @chan: The current channel (from remain_on_channel request)
2977 * @channel_type: Channel type
2978 * @duration: Duration in milliseconds that the driver intents to remain on the
2979 * channel
2980 * @gfp: allocation flags
2981 */
2982void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
2983 struct ieee80211_channel *chan,
2984 enum nl80211_channel_type channel_type,
2985 unsigned int duration, gfp_t gfp);
2986
2987/**
2988 * cfg80211_remain_on_channel_expired - remain_on_channel duration expired
2989 * @dev: network device
2990 * @cookie: the request cookie
2991 * @chan: The current channel (from remain_on_channel request)
2992 * @channel_type: Channel type
2993 * @gfp: allocation flags
2994 */
2995void cfg80211_remain_on_channel_expired(struct net_device *dev,
2996 u64 cookie,
2997 struct ieee80211_channel *chan,
2998 enum nl80211_channel_type channel_type,
2999 gfp_t gfp);
Samuel Ortizb23aa672009-07-01 21:26:54 +02003000
Johannes Berg98b62182009-12-23 13:15:44 +01003001
3002/**
3003 * cfg80211_new_sta - notify userspace about station
3004 *
3005 * @dev: the netdev
3006 * @mac_addr: the station's address
3007 * @sinfo: the station information
3008 * @gfp: allocation flags
3009 */
3010void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
3011 struct station_info *sinfo, gfp_t gfp);
3012
Jouni Malinen026331c2010-02-15 12:53:10 +02003013/**
Jouni Malinenec15e682011-03-23 15:29:52 +02003014 * cfg80211_del_sta - notify userspace about deletion of a station
3015 *
3016 * @dev: the netdev
3017 * @mac_addr: the station's address
3018 * @gfp: allocation flags
3019 */
3020void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
3021
3022/**
Johannes Berg2e161f72010-08-12 15:38:38 +02003023 * cfg80211_rx_mgmt - notification of received, unprocessed management frame
Jouni Malinen026331c2010-02-15 12:53:10 +02003024 * @dev: network device
3025 * @freq: Frequency on which the frame was received in MHz
Johannes Berg2e161f72010-08-12 15:38:38 +02003026 * @buf: Management frame (header + body)
Jouni Malinen026331c2010-02-15 12:53:10 +02003027 * @len: length of the frame data
3028 * @gfp: context flags
Johannes Berg2e161f72010-08-12 15:38:38 +02003029 *
3030 * Returns %true if a user space application has registered for this frame.
3031 * For action frames, that makes it responsible for rejecting unrecognized
3032 * action frames; %false otherwise, in which case for action frames the
3033 * driver is responsible for rejecting the frame.
Jouni Malinen026331c2010-02-15 12:53:10 +02003034 *
3035 * This function is called whenever an Action frame is received for a station
3036 * mode interface, but is not processed in kernel.
3037 */
Johannes Berg2e161f72010-08-12 15:38:38 +02003038bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
3039 size_t len, gfp_t gfp);
Jouni Malinen026331c2010-02-15 12:53:10 +02003040
3041/**
Johannes Berg2e161f72010-08-12 15:38:38 +02003042 * cfg80211_mgmt_tx_status - notification of TX status for management frame
Jouni Malinen026331c2010-02-15 12:53:10 +02003043 * @dev: network device
Johannes Berg2e161f72010-08-12 15:38:38 +02003044 * @cookie: Cookie returned by cfg80211_ops::mgmt_tx()
3045 * @buf: Management frame (header + body)
Jouni Malinen026331c2010-02-15 12:53:10 +02003046 * @len: length of the frame data
3047 * @ack: Whether frame was acknowledged
3048 * @gfp: context flags
3049 *
Johannes Berg2e161f72010-08-12 15:38:38 +02003050 * This function is called whenever a management frame was requested to be
3051 * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the
Jouni Malinen026331c2010-02-15 12:53:10 +02003052 * transmission attempt.
3053 */
Johannes Berg2e161f72010-08-12 15:38:38 +02003054void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
3055 const u8 *buf, size_t len, bool ack, gfp_t gfp);
Jouni Malinen026331c2010-02-15 12:53:10 +02003056
Juuso Oikarinend6dc1a32010-03-23 09:02:33 +02003057
3058/**
3059 * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event
3060 * @dev: network device
3061 * @rssi_event: the triggered RSSI event
3062 * @gfp: context flags
3063 *
3064 * This function is called when a configured connection quality monitoring
3065 * rssi threshold reached event occurs.
3066 */
3067void cfg80211_cqm_rssi_notify(struct net_device *dev,
3068 enum nl80211_cqm_rssi_threshold_event rssi_event,
3069 gfp_t gfp);
3070
Johannes Bergc063dbf2010-11-24 08:10:05 +01003071/**
3072 * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
3073 * @dev: network device
3074 * @peer: peer's MAC address
3075 * @num_packets: how many packets were lost -- should be a fixed threshold
3076 * but probably no less than maybe 50, or maybe a throughput dependent
3077 * threshold (to account for temporary interference)
3078 * @gfp: context flags
3079 */
3080void cfg80211_cqm_pktloss_notify(struct net_device *dev,
3081 const u8 *peer, u32 num_packets, gfp_t gfp);
3082
Johannes Berge5497d72011-07-05 16:35:40 +02003083/**
3084 * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
3085 * @dev: network device
3086 * @bssid: BSSID of AP (to avoid races)
3087 * @replay_ctr: new replay counter
Johannes Bergaf71ff82011-07-09 14:48:30 +02003088 * @gfp: allocation flags
Johannes Berge5497d72011-07-05 16:35:40 +02003089 */
3090void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
3091 const u8 *replay_ctr, gfp_t gfp);
3092
Joe Perchese1db74f2010-07-26 14:39:57 -07003093/* Logging, debugging and troubleshooting/diagnostic helpers. */
3094
3095/* wiphy_printk helpers, similar to dev_printk */
3096
3097#define wiphy_printk(level, wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003098 dev_printk(level, &(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07003099#define wiphy_emerg(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003100 dev_emerg(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07003101#define wiphy_alert(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003102 dev_alert(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07003103#define wiphy_crit(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003104 dev_crit(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07003105#define wiphy_err(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003106 dev_err(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07003107#define wiphy_warn(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003108 dev_warn(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07003109#define wiphy_notice(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003110 dev_notice(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07003111#define wiphy_info(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003112 dev_info(&(wiphy)->dev, format, ##args)
Joe Perches073730d2010-07-26 14:40:00 -07003113
Joe Perches9c376632010-08-20 15:13:59 -07003114#define wiphy_debug(wiphy, format, args...) \
Joe Perchese1db74f2010-07-26 14:39:57 -07003115 wiphy_printk(KERN_DEBUG, wiphy, format, ##args)
Joe Perches9c376632010-08-20 15:13:59 -07003116
Joe Perchese1db74f2010-07-26 14:39:57 -07003117#define wiphy_dbg(wiphy, format, args...) \
Joe Perches9c376632010-08-20 15:13:59 -07003118 dev_dbg(&(wiphy)->dev, format, ##args)
Joe Perchese1db74f2010-07-26 14:39:57 -07003119
3120#if defined(VERBOSE_DEBUG)
3121#define wiphy_vdbg wiphy_dbg
3122#else
Joe Perchese1db74f2010-07-26 14:39:57 -07003123#define wiphy_vdbg(wiphy, format, args...) \
3124({ \
3125 if (0) \
3126 wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \
Joe Perches9c376632010-08-20 15:13:59 -07003127 0; \
Joe Perchese1db74f2010-07-26 14:39:57 -07003128})
3129#endif
3130
3131/*
3132 * wiphy_WARN() acts like wiphy_printk(), but with the key difference
3133 * of using a WARN/WARN_ON to get the message out, including the
3134 * file/line information and a backtrace.
3135 */
3136#define wiphy_WARN(wiphy, format, args...) \
3137 WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args);
3138
Johannes Berg704232c2007-04-23 12:20:05 -07003139#endif /* __NET_CFG80211_H */