Bryan Wu | b91c4be | 2010-03-19 22:18:15 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Driver for a keypad w/16 buttons connected to a PCF8574 I2C I/O expander |
| 3 | * |
| 4 | * Copyright 2005-2008 Analog Devices Inc. |
| 5 | * |
| 6 | * Licensed under the GPL-2 or later. |
| 7 | */ |
| 8 | |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/init.h> |
| 11 | #include <linux/input.h> |
| 12 | #include <linux/interrupt.h> |
| 13 | #include <linux/i2c.h> |
| 14 | #include <linux/slab.h> |
| 15 | #include <linux/workqueue.h> |
| 16 | |
| 17 | #define DRV_NAME "pcf8574_keypad" |
| 18 | |
| 19 | static const unsigned char pcf8574_kp_btncode[] = { |
| 20 | [0] = KEY_RESERVED, |
| 21 | [1] = KEY_ENTER, |
| 22 | [2] = KEY_BACKSLASH, |
| 23 | [3] = KEY_0, |
| 24 | [4] = KEY_RIGHTBRACE, |
| 25 | [5] = KEY_C, |
| 26 | [6] = KEY_9, |
| 27 | [7] = KEY_8, |
| 28 | [8] = KEY_7, |
| 29 | [9] = KEY_B, |
| 30 | [10] = KEY_6, |
| 31 | [11] = KEY_5, |
| 32 | [12] = KEY_4, |
| 33 | [13] = KEY_A, |
| 34 | [14] = KEY_3, |
| 35 | [15] = KEY_2, |
| 36 | [16] = KEY_1 |
| 37 | }; |
| 38 | |
| 39 | struct kp_data { |
| 40 | unsigned short btncode[ARRAY_SIZE(pcf8574_kp_btncode)]; |
| 41 | struct input_dev *idev; |
| 42 | struct i2c_client *client; |
| 43 | char name[64]; |
| 44 | char phys[32]; |
| 45 | unsigned char laststate; |
| 46 | }; |
| 47 | |
| 48 | static short read_state(struct kp_data *lp) |
| 49 | { |
| 50 | unsigned char x, y, a, b; |
| 51 | |
| 52 | i2c_smbus_write_byte(lp->client, 240); |
| 53 | x = 0xF & (~(i2c_smbus_read_byte(lp->client) >> 4)); |
| 54 | |
| 55 | i2c_smbus_write_byte(lp->client, 15); |
| 56 | y = 0xF & (~i2c_smbus_read_byte(lp->client)); |
| 57 | |
| 58 | for (a = 0; x > 0; a++) |
| 59 | x = x >> 1; |
| 60 | for (b = 0; y > 0; b++) |
| 61 | y = y >> 1; |
| 62 | |
| 63 | return ((a - 1) * 4) + b; |
| 64 | } |
| 65 | |
| 66 | static irqreturn_t pcf8574_kp_irq_handler(int irq, void *dev_id) |
| 67 | { |
| 68 | struct kp_data *lp = dev_id; |
| 69 | unsigned char nextstate = read_state(lp); |
| 70 | |
| 71 | if (lp->laststate != nextstate) { |
Dan Carpenter | 0b75f77 | 2010-06-05 00:34:08 -0700 | [diff] [blame] | 72 | int key_down = nextstate < ARRAY_SIZE(lp->btncode); |
Bryan Wu | b91c4be | 2010-03-19 22:18:15 -0700 | [diff] [blame] | 73 | unsigned short keycode = key_down ? |
| 74 | lp->btncode[nextstate] : lp->btncode[lp->laststate]; |
| 75 | |
| 76 | input_report_key(lp->idev, keycode, key_down); |
| 77 | input_sync(lp->idev); |
| 78 | |
| 79 | lp->laststate = nextstate; |
| 80 | } |
| 81 | |
| 82 | return IRQ_HANDLED; |
| 83 | } |
| 84 | |
| 85 | static int __devinit pcf8574_kp_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| 86 | { |
| 87 | int i, ret; |
| 88 | struct input_dev *idev; |
| 89 | struct kp_data *lp; |
| 90 | |
| 91 | if (i2c_smbus_write_byte(client, 240) < 0) { |
| 92 | dev_err(&client->dev, "probe: write fail\n"); |
| 93 | return -ENODEV; |
| 94 | } |
| 95 | |
| 96 | lp = kzalloc(sizeof(*lp), GFP_KERNEL); |
| 97 | if (!lp) |
| 98 | return -ENOMEM; |
| 99 | |
| 100 | idev = input_allocate_device(); |
| 101 | if (!idev) { |
| 102 | dev_err(&client->dev, "Can't allocate input device\n"); |
| 103 | ret = -ENOMEM; |
| 104 | goto fail_allocate; |
| 105 | } |
| 106 | |
| 107 | lp->idev = idev; |
| 108 | lp->client = client; |
| 109 | |
| 110 | idev->evbit[0] = BIT_MASK(EV_KEY); |
| 111 | idev->keycode = lp->btncode; |
| 112 | idev->keycodesize = sizeof(lp->btncode[0]); |
| 113 | idev->keycodemax = ARRAY_SIZE(lp->btncode); |
| 114 | |
| 115 | for (i = 0; i < ARRAY_SIZE(pcf8574_kp_btncode); i++) { |
| 116 | lp->btncode[i] = pcf8574_kp_btncode[i]; |
| 117 | __set_bit(lp->btncode[i] & KEY_MAX, idev->keybit); |
| 118 | } |
| 119 | |
| 120 | sprintf(lp->name, DRV_NAME); |
| 121 | sprintf(lp->phys, "kp_data/input0"); |
| 122 | |
| 123 | idev->name = lp->name; |
| 124 | idev->phys = lp->phys; |
| 125 | idev->id.bustype = BUS_I2C; |
| 126 | idev->id.vendor = 0x0001; |
| 127 | idev->id.product = 0x0001; |
| 128 | idev->id.version = 0x0100; |
| 129 | |
| 130 | input_set_drvdata(idev, lp); |
| 131 | |
| 132 | ret = input_register_device(idev); |
| 133 | if (ret) { |
| 134 | dev_err(&client->dev, "input_register_device() failed\n"); |
| 135 | goto fail_register; |
| 136 | } |
| 137 | |
| 138 | lp->laststate = read_state(lp); |
| 139 | |
| 140 | ret = request_threaded_irq(client->irq, NULL, pcf8574_kp_irq_handler, |
| 141 | IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| 142 | DRV_NAME, lp); |
| 143 | if (ret) { |
| 144 | dev_err(&client->dev, "IRQ %d is not free\n", client->irq); |
| 145 | goto fail_irq; |
| 146 | } |
| 147 | |
| 148 | i2c_set_clientdata(client, lp); |
| 149 | return 0; |
| 150 | |
| 151 | fail_irq: |
| 152 | input_unregister_device(idev); |
| 153 | fail_register: |
| 154 | input_set_drvdata(idev, NULL); |
| 155 | input_free_device(idev); |
| 156 | fail_allocate: |
| 157 | kfree(lp); |
| 158 | |
| 159 | return ret; |
| 160 | } |
| 161 | |
| 162 | static int __devexit pcf8574_kp_remove(struct i2c_client *client) |
| 163 | { |
| 164 | struct kp_data *lp = i2c_get_clientdata(client); |
| 165 | |
| 166 | free_irq(client->irq, lp); |
| 167 | |
| 168 | input_unregister_device(lp->idev); |
| 169 | kfree(lp); |
| 170 | |
Bryan Wu | b91c4be | 2010-03-19 22:18:15 -0700 | [diff] [blame] | 171 | return 0; |
| 172 | } |
| 173 | |
| 174 | #ifdef CONFIG_PM |
| 175 | static int pcf8574_kp_resume(struct i2c_client *client) |
| 176 | { |
| 177 | enable_irq(client->irq); |
| 178 | |
| 179 | return 0; |
| 180 | } |
| 181 | |
| 182 | static int pcf8574_kp_suspend(struct i2c_client *client, pm_message_t mesg) |
| 183 | { |
| 184 | disable_irq(client->irq); |
| 185 | |
| 186 | return 0; |
| 187 | } |
| 188 | #else |
| 189 | # define pcf8574_kp_resume NULL |
| 190 | # define pcf8574_kp_suspend NULL |
| 191 | #endif |
| 192 | |
| 193 | static const struct i2c_device_id pcf8574_kp_id[] = { |
| 194 | { DRV_NAME, 0 }, |
| 195 | { } |
| 196 | }; |
| 197 | MODULE_DEVICE_TABLE(i2c, pcf8574_kp_id); |
| 198 | |
| 199 | static struct i2c_driver pcf8574_kp_driver = { |
| 200 | .driver = { |
| 201 | .name = DRV_NAME, |
| 202 | .owner = THIS_MODULE, |
| 203 | }, |
| 204 | .probe = pcf8574_kp_probe, |
| 205 | .remove = __devexit_p(pcf8574_kp_remove), |
| 206 | .suspend = pcf8574_kp_suspend, |
| 207 | .resume = pcf8574_kp_resume, |
| 208 | .id_table = pcf8574_kp_id, |
| 209 | }; |
| 210 | |
| 211 | static int __init pcf8574_kp_init(void) |
| 212 | { |
| 213 | return i2c_add_driver(&pcf8574_kp_driver); |
| 214 | } |
| 215 | module_init(pcf8574_kp_init); |
| 216 | |
| 217 | static void __exit pcf8574_kp_exit(void) |
| 218 | { |
| 219 | i2c_del_driver(&pcf8574_kp_driver); |
| 220 | } |
| 221 | module_exit(pcf8574_kp_exit); |
| 222 | |
| 223 | MODULE_AUTHOR("Michael Hennerich"); |
| 224 | MODULE_DESCRIPTION("Keypad input driver for 16 keys connected to PCF8574"); |
| 225 | MODULE_LICENSE("GPL"); |