blob: 9928a2fbce0cd315d6ea7b609b3ace5442b3dd87 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#include <linux/types.h>
2#include <linux/mm.h>
3#include <linux/blkdev.h>
4#include <linux/sched.h>
5#include <linux/version.h>
6#include <linux/init.h>
7#include <linux/interrupt.h>
8
9#include <asm/setup.h>
10#include <asm/page.h>
11#include <asm/pgtable.h>
12#include <asm/amigaints.h>
13#include <asm/amigahw.h>
14#include <linux/zorro.h>
15#include <asm/irq.h>
16#include <linux/spinlock.h>
17
18#include "scsi.h"
19#include <scsi/scsi_host.h>
20#include "wd33c93.h"
21#include "a2091.h"
22
23#include<linux/stat.h>
24
25#define DMA(ptr) ((a2091_scsiregs *)((ptr)->base))
26#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata))
27
28static irqreturn_t a2091_intr (int irq, void *_instance, struct pt_regs *fp)
29{
30 unsigned long flags;
31 unsigned int status;
32 struct Scsi_Host *instance = (struct Scsi_Host *)_instance;
33
34 status = DMA(instance)->ISTR;
35 if (!(status & (ISTR_INT_F|ISTR_INT_P)) || !(status & ISTR_INTS))
36 return IRQ_NONE;
37
38 spin_lock_irqsave(instance->host_lock, flags);
39 wd33c93_intr(instance);
40 spin_unlock_irqrestore(instance->host_lock, flags);
41 return IRQ_HANDLED;
42}
43
44static int dma_setup (Scsi_Cmnd *cmd, int dir_in)
45{
46 unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
47 unsigned long addr = virt_to_bus(cmd->SCp.ptr);
48 struct Scsi_Host *instance = cmd->device->host;
49
50 /* don't allow DMA if the physical address is bad */
51 if (addr & A2091_XFER_MASK ||
52 (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
53 {
54 HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511)
55 & ~0x1ff;
56 HDATA(instance)->dma_bounce_buffer =
57 kmalloc (HDATA(instance)->dma_bounce_len, GFP_KERNEL);
58
59 /* can't allocate memory; use PIO */
60 if (!HDATA(instance)->dma_bounce_buffer) {
61 HDATA(instance)->dma_bounce_len = 0;
62 return 1;
63 }
64
65 /* get the physical address of the bounce buffer */
66 addr = virt_to_bus(HDATA(instance)->dma_bounce_buffer);
67
68 /* the bounce buffer may not be in the first 16M of physmem */
69 if (addr & A2091_XFER_MASK) {
70 /* we could use chipmem... maybe later */
71 kfree (HDATA(instance)->dma_bounce_buffer);
72 HDATA(instance)->dma_bounce_buffer = NULL;
73 HDATA(instance)->dma_bounce_len = 0;
74 return 1;
75 }
76
77 if (!dir_in) {
78 /* copy to bounce buffer for a write */
79 if (cmd->use_sg)
80#if 0
81 panic ("scsi%ddma: incomplete s/g support",
82 instance->host_no);
83#else
84 memcpy (HDATA(instance)->dma_bounce_buffer,
85 cmd->SCp.ptr, cmd->SCp.this_residual);
86#endif
87 else
88 memcpy (HDATA(instance)->dma_bounce_buffer,
89 cmd->request_buffer, cmd->request_bufflen);
90 }
91 }
92
93 /* setup dma direction */
94 if (!dir_in)
95 cntr |= CNTR_DDIR;
96
97 /* remember direction */
98 HDATA(cmd->device->host)->dma_dir = dir_in;
99
100 DMA(cmd->device->host)->CNTR = cntr;
101
102 /* setup DMA *physical* address */
103 DMA(cmd->device->host)->ACR = addr;
104
105 if (dir_in){
106 /* invalidate any cache */
107 cache_clear (addr, cmd->SCp.this_residual);
108 }else{
109 /* push any dirty cache */
110 cache_push (addr, cmd->SCp.this_residual);
111 }
112 /* start DMA */
113 DMA(cmd->device->host)->ST_DMA = 1;
114
115 /* return success */
116 return 0;
117}
118
119static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
120 int status)
121{
122 /* disable SCSI interrupts */
123 unsigned short cntr = CNTR_PDMD;
124
125 if (!HDATA(instance)->dma_dir)
126 cntr |= CNTR_DDIR;
127
128 /* disable SCSI interrupts */
129 DMA(instance)->CNTR = cntr;
130
131 /* flush if we were reading */
132 if (HDATA(instance)->dma_dir) {
133 DMA(instance)->FLUSH = 1;
134 while (!(DMA(instance)->ISTR & ISTR_FE_FLG))
135 ;
136 }
137
138 /* clear a possible interrupt */
139 DMA(instance)->CINT = 1;
140
141 /* stop DMA */
142 DMA(instance)->SP_DMA = 1;
143
144 /* restore the CONTROL bits (minus the direction flag) */
145 DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
146
147 /* copy from a bounce buffer, if necessary */
148 if (status && HDATA(instance)->dma_bounce_buffer) {
149 if (SCpnt && SCpnt->use_sg) {
150#if 0
151 panic ("scsi%d: incomplete s/g support",
152 instance->host_no);
153#else
154 if( HDATA(instance)->dma_dir )
155 memcpy (SCpnt->SCp.ptr,
156 HDATA(instance)->dma_bounce_buffer,
157 SCpnt->SCp.this_residual);
158 kfree (HDATA(instance)->dma_bounce_buffer);
159 HDATA(instance)->dma_bounce_buffer = NULL;
160 HDATA(instance)->dma_bounce_len = 0;
161
162#endif
163 } else {
164 if (HDATA(instance)->dma_dir && SCpnt)
165 memcpy (SCpnt->request_buffer,
166 HDATA(instance)->dma_bounce_buffer,
167 SCpnt->request_bufflen);
168
169 kfree (HDATA(instance)->dma_bounce_buffer);
170 HDATA(instance)->dma_bounce_buffer = NULL;
171 HDATA(instance)->dma_bounce_len = 0;
172 }
173 }
174}
175
176int __init a2091_detect(Scsi_Host_Template *tpnt)
177{
178 static unsigned char called = 0;
179 struct Scsi_Host *instance;
180 unsigned long address;
181 struct zorro_dev *z = NULL;
182 wd33c93_regs regs;
183 int num_a2091 = 0;
184
185 if (!MACH_IS_AMIGA || called)
186 return 0;
187 called = 1;
188
189 tpnt->proc_name = "A2091";
190 tpnt->proc_info = &wd33c93_proc_info;
191
192 while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
193 if (z->id != ZORRO_PROD_CBM_A590_A2091_1 &&
194 z->id != ZORRO_PROD_CBM_A590_A2091_2)
195 continue;
196 address = z->resource.start;
197 if (!request_mem_region(address, 256, "wd33c93"))
198 continue;
199
200 instance = scsi_register (tpnt, sizeof (struct WD33C93_hostdata));
201 if (instance == NULL) {
202 release_mem_region(address, 256);
203 continue;
204 }
205 instance->base = ZTWO_VADDR(address);
206 instance->irq = IRQ_AMIGA_PORTS;
207 instance->unique_id = z->slotaddr;
208 DMA(instance)->DAWR = DAWR_A2091;
209 regs.SASR = &(DMA(instance)->SASR);
210 regs.SCMD = &(DMA(instance)->SCMD);
211 wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
212 request_irq(IRQ_AMIGA_PORTS, a2091_intr, SA_SHIRQ, "A2091 SCSI",
213 instance);
214 DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
215 num_a2091++;
216 }
217
218 return num_a2091;
219}
220
221static int a2091_bus_reset(Scsi_Cmnd *cmd)
222{
223 /* FIXME perform bus-specific reset */
224 wd33c93_host_reset(cmd);
225 return SUCCESS;
226}
227
228#define HOSTS_C
229
230static Scsi_Host_Template driver_template = {
231 .proc_name = "A2901",
232 .name = "Commodore A2091/A590 SCSI",
233 .detect = a2091_detect,
234 .release = a2091_release,
235 .queuecommand = wd33c93_queuecommand,
236 .eh_abort_handler = wd33c93_abort,
237 .eh_bus_reset_handler = a2091_bus_reset,
238 .eh_host_reset_handler = wd33c93_host_reset,
239 .can_queue = CAN_QUEUE,
240 .this_id = 7,
241 .sg_tablesize = SG_ALL,
242 .cmd_per_lun = CMD_PER_LUN,
243 .use_clustering = DISABLE_CLUSTERING
244};
245
246
247#include "scsi_module.c"
248
249int a2091_release(struct Scsi_Host *instance)
250{
251#ifdef MODULE
252 DMA(instance)->CNTR = 0;
253 release_mem_region(ZTWO_PADDR(instance->base), 256);
254 free_irq(IRQ_AMIGA_PORTS, instance);
255 wd33c93_release();
256#endif
257 return 1;
258}
259
260MODULE_LICENSE("GPL");