Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver |
| 3 | * |
| 4 | * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/dma-mapping.h> |
| 13 | #include <linux/clk.h> |
| 14 | #include <linux/mmc/host.h> |
| 15 | #include <linux/platform_device.h> |
| 16 | #include <linux/irq.h> |
| 17 | #include <linux/io.h> |
| 18 | |
| 19 | #include <asm/dma.h> |
| 20 | |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 21 | #include <mach/regs-sdi.h> |
| 22 | #include <mach/regs-gpio.h> |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 23 | |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 24 | #include <asm/plat-s3c24xx/mci.h> |
| 25 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 26 | #include "s3cmci.h" |
| 27 | |
| 28 | #define DRIVER_NAME "s3c-mci" |
| 29 | |
| 30 | enum dbg_channels { |
| 31 | dbg_err = (1 << 0), |
| 32 | dbg_debug = (1 << 1), |
| 33 | dbg_info = (1 << 2), |
| 34 | dbg_irq = (1 << 3), |
| 35 | dbg_sg = (1 << 4), |
| 36 | dbg_dma = (1 << 5), |
| 37 | dbg_pio = (1 << 6), |
| 38 | dbg_fail = (1 << 7), |
| 39 | dbg_conf = (1 << 8), |
| 40 | }; |
| 41 | |
| 42 | static const int dbgmap_err = dbg_err | dbg_fail; |
| 43 | static const int dbgmap_info = dbg_info | dbg_conf; |
| 44 | static const int dbgmap_debug = dbg_debug; |
| 45 | |
| 46 | #define dbg(host, channels, args...) \ |
| 47 | do { \ |
| 48 | if (dbgmap_err & channels) \ |
| 49 | dev_err(&host->pdev->dev, args); \ |
| 50 | else if (dbgmap_info & channels) \ |
| 51 | dev_info(&host->pdev->dev, args); \ |
| 52 | else if (dbgmap_debug & channels) \ |
| 53 | dev_dbg(&host->pdev->dev, args); \ |
| 54 | } while (0) |
| 55 | |
| 56 | #define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) |
| 57 | |
| 58 | static struct s3c2410_dma_client s3cmci_dma_client = { |
| 59 | .name = "s3c-mci", |
| 60 | }; |
| 61 | |
| 62 | static void finalize_request(struct s3cmci_host *host); |
| 63 | static void s3cmci_send_request(struct mmc_host *mmc); |
| 64 | static void s3cmci_reset(struct s3cmci_host *host); |
| 65 | |
| 66 | #ifdef CONFIG_MMC_DEBUG |
| 67 | |
| 68 | static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) |
| 69 | { |
| 70 | u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize; |
| 71 | u32 datcon, datcnt, datsta, fsta, imask; |
| 72 | |
| 73 | con = readl(host->base + S3C2410_SDICON); |
| 74 | pre = readl(host->base + S3C2410_SDIPRE); |
| 75 | cmdarg = readl(host->base + S3C2410_SDICMDARG); |
| 76 | cmdcon = readl(host->base + S3C2410_SDICMDCON); |
| 77 | cmdsta = readl(host->base + S3C2410_SDICMDSTAT); |
| 78 | r0 = readl(host->base + S3C2410_SDIRSP0); |
| 79 | r1 = readl(host->base + S3C2410_SDIRSP1); |
| 80 | r2 = readl(host->base + S3C2410_SDIRSP2); |
| 81 | r3 = readl(host->base + S3C2410_SDIRSP3); |
| 82 | timer = readl(host->base + S3C2410_SDITIMER); |
| 83 | bsize = readl(host->base + S3C2410_SDIBSIZE); |
| 84 | datcon = readl(host->base + S3C2410_SDIDCON); |
| 85 | datcnt = readl(host->base + S3C2410_SDIDCNT); |
| 86 | datsta = readl(host->base + S3C2410_SDIDSTA); |
| 87 | fsta = readl(host->base + S3C2410_SDIFSTA); |
| 88 | imask = readl(host->base + host->sdiimsk); |
| 89 | |
| 90 | dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n", |
| 91 | prefix, con, pre, timer); |
| 92 | |
| 93 | dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n", |
| 94 | prefix, cmdcon, cmdarg, cmdsta); |
| 95 | |
| 96 | dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]" |
| 97 | " DSTA:[%08x] DCNT:[%08x]\n", |
| 98 | prefix, datcon, fsta, datsta, datcnt); |
| 99 | |
| 100 | dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]" |
| 101 | " R2:[%08x] R3:[%08x]\n", |
| 102 | prefix, r0, r1, r2, r3); |
| 103 | } |
| 104 | |
| 105 | static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, |
| 106 | int stop) |
| 107 | { |
| 108 | snprintf(host->dbgmsg_cmd, 300, |
| 109 | "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u", |
| 110 | host->ccnt, (stop ? " (STOP)" : ""), |
| 111 | cmd->opcode, cmd->arg, cmd->flags, cmd->retries); |
| 112 | |
| 113 | if (cmd->data) { |
| 114 | snprintf(host->dbgmsg_dat, 300, |
| 115 | "#%u bsize:%u blocks:%u bytes:%u", |
| 116 | host->dcnt, cmd->data->blksz, |
| 117 | cmd->data->blocks, |
| 118 | cmd->data->blocks * cmd->data->blksz); |
| 119 | } else { |
| 120 | host->dbgmsg_dat[0] = '\0'; |
| 121 | } |
| 122 | } |
| 123 | |
| 124 | static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, |
| 125 | int fail) |
| 126 | { |
| 127 | unsigned int dbglvl = fail ? dbg_fail : dbg_debug; |
| 128 | |
| 129 | if (!cmd) |
| 130 | return; |
| 131 | |
| 132 | if (cmd->error == 0) { |
| 133 | dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n", |
| 134 | host->dbgmsg_cmd, cmd->resp[0]); |
| 135 | } else { |
| 136 | dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n", |
| 137 | cmd->error, host->dbgmsg_cmd, host->status); |
| 138 | } |
| 139 | |
| 140 | if (!cmd->data) |
| 141 | return; |
| 142 | |
| 143 | if (cmd->data->error == 0) { |
| 144 | dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat); |
| 145 | } else { |
| 146 | dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n", |
| 147 | cmd->data->error, host->dbgmsg_dat, |
| 148 | readl(host->base + S3C2410_SDIDCNT)); |
| 149 | } |
| 150 | } |
| 151 | #else |
| 152 | static void dbg_dumpcmd(struct s3cmci_host *host, |
| 153 | struct mmc_command *cmd, int fail) { } |
| 154 | |
| 155 | static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, |
| 156 | int stop) { } |
| 157 | |
| 158 | static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { } |
| 159 | |
| 160 | #endif /* CONFIG_MMC_DEBUG */ |
| 161 | |
| 162 | static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) |
| 163 | { |
| 164 | u32 newmask; |
| 165 | |
| 166 | newmask = readl(host->base + host->sdiimsk); |
| 167 | newmask |= imask; |
| 168 | |
| 169 | writel(newmask, host->base + host->sdiimsk); |
| 170 | |
| 171 | return newmask; |
| 172 | } |
| 173 | |
| 174 | static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) |
| 175 | { |
| 176 | u32 newmask; |
| 177 | |
| 178 | newmask = readl(host->base + host->sdiimsk); |
| 179 | newmask &= ~imask; |
| 180 | |
| 181 | writel(newmask, host->base + host->sdiimsk); |
| 182 | |
| 183 | return newmask; |
| 184 | } |
| 185 | |
| 186 | static inline void clear_imask(struct s3cmci_host *host) |
| 187 | { |
| 188 | writel(0, host->base + host->sdiimsk); |
| 189 | } |
| 190 | |
| 191 | static inline int get_data_buffer(struct s3cmci_host *host, |
| 192 | u32 *words, u32 **pointer) |
| 193 | { |
| 194 | struct scatterlist *sg; |
| 195 | |
| 196 | if (host->pio_active == XFER_NONE) |
| 197 | return -EINVAL; |
| 198 | |
| 199 | if ((!host->mrq) || (!host->mrq->data)) |
| 200 | return -EINVAL; |
| 201 | |
| 202 | if (host->pio_sgptr >= host->mrq->data->sg_len) { |
| 203 | dbg(host, dbg_debug, "no more buffers (%i/%i)\n", |
| 204 | host->pio_sgptr, host->mrq->data->sg_len); |
| 205 | return -EBUSY; |
| 206 | } |
| 207 | sg = &host->mrq->data->sg[host->pio_sgptr]; |
| 208 | |
| 209 | *words = sg->length >> 2; |
| 210 | *pointer = sg_virt(sg); |
| 211 | |
| 212 | host->pio_sgptr++; |
| 213 | |
| 214 | dbg(host, dbg_sg, "new buffer (%i/%i)\n", |
| 215 | host->pio_sgptr, host->mrq->data->sg_len); |
| 216 | |
| 217 | return 0; |
| 218 | } |
| 219 | |
| 220 | static inline u32 fifo_count(struct s3cmci_host *host) |
| 221 | { |
| 222 | u32 fifostat = readl(host->base + S3C2410_SDIFSTA); |
| 223 | |
| 224 | fifostat &= S3C2410_SDIFSTA_COUNTMASK; |
| 225 | return fifostat >> 2; |
| 226 | } |
| 227 | |
| 228 | static inline u32 fifo_free(struct s3cmci_host *host) |
| 229 | { |
| 230 | u32 fifostat = readl(host->base + S3C2410_SDIFSTA); |
| 231 | |
| 232 | fifostat &= S3C2410_SDIFSTA_COUNTMASK; |
| 233 | return (63 - fifostat) >> 2; |
| 234 | } |
| 235 | |
| 236 | static void do_pio_read(struct s3cmci_host *host) |
| 237 | { |
| 238 | int res; |
| 239 | u32 fifo; |
| 240 | void __iomem *from_ptr; |
| 241 | |
| 242 | /* write real prescaler to host, it might be set slow to fix */ |
| 243 | writel(host->prescaler, host->base + S3C2410_SDIPRE); |
| 244 | |
| 245 | from_ptr = host->base + host->sdidata; |
| 246 | |
| 247 | while ((fifo = fifo_count(host))) { |
| 248 | if (!host->pio_words) { |
| 249 | res = get_data_buffer(host, &host->pio_words, |
| 250 | &host->pio_ptr); |
| 251 | if (res) { |
| 252 | host->pio_active = XFER_NONE; |
| 253 | host->complete_what = COMPLETION_FINALIZE; |
| 254 | |
| 255 | dbg(host, dbg_pio, "pio_read(): " |
| 256 | "complete (no more data).\n"); |
| 257 | return; |
| 258 | } |
| 259 | |
| 260 | dbg(host, dbg_pio, |
| 261 | "pio_read(): new target: [%i]@[%p]\n", |
| 262 | host->pio_words, host->pio_ptr); |
| 263 | } |
| 264 | |
| 265 | dbg(host, dbg_pio, |
| 266 | "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n", |
| 267 | fifo, host->pio_words, |
| 268 | readl(host->base + S3C2410_SDIDCNT)); |
| 269 | |
| 270 | if (fifo > host->pio_words) |
| 271 | fifo = host->pio_words; |
| 272 | |
| 273 | host->pio_words -= fifo; |
| 274 | host->pio_count += fifo; |
| 275 | |
| 276 | while (fifo--) |
| 277 | *(host->pio_ptr++) = readl(from_ptr); |
| 278 | } |
| 279 | |
| 280 | if (!host->pio_words) { |
| 281 | res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); |
| 282 | if (res) { |
| 283 | dbg(host, dbg_pio, |
| 284 | "pio_read(): complete (no more buffers).\n"); |
| 285 | host->pio_active = XFER_NONE; |
| 286 | host->complete_what = COMPLETION_FINALIZE; |
| 287 | |
| 288 | return; |
| 289 | } |
| 290 | } |
| 291 | |
| 292 | enable_imask(host, |
| 293 | S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); |
| 294 | } |
| 295 | |
| 296 | static void do_pio_write(struct s3cmci_host *host) |
| 297 | { |
| 298 | void __iomem *to_ptr; |
| 299 | int res; |
| 300 | u32 fifo; |
| 301 | |
| 302 | to_ptr = host->base + host->sdidata; |
| 303 | |
| 304 | while ((fifo = fifo_free(host))) { |
| 305 | if (!host->pio_words) { |
| 306 | res = get_data_buffer(host, &host->pio_words, |
| 307 | &host->pio_ptr); |
| 308 | if (res) { |
| 309 | dbg(host, dbg_pio, |
| 310 | "pio_write(): complete (no more data).\n"); |
| 311 | host->pio_active = XFER_NONE; |
| 312 | |
| 313 | return; |
| 314 | } |
| 315 | |
| 316 | dbg(host, dbg_pio, |
| 317 | "pio_write(): new source: [%i]@[%p]\n", |
| 318 | host->pio_words, host->pio_ptr); |
| 319 | |
| 320 | } |
| 321 | |
| 322 | if (fifo > host->pio_words) |
| 323 | fifo = host->pio_words; |
| 324 | |
| 325 | host->pio_words -= fifo; |
| 326 | host->pio_count += fifo; |
| 327 | |
| 328 | while (fifo--) |
| 329 | writel(*(host->pio_ptr++), to_ptr); |
| 330 | } |
| 331 | |
| 332 | enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); |
| 333 | } |
| 334 | |
| 335 | static void pio_tasklet(unsigned long data) |
| 336 | { |
| 337 | struct s3cmci_host *host = (struct s3cmci_host *) data; |
| 338 | |
| 339 | |
Roman Moracik | d643b5f | 2008-06-30 22:40:28 +0100 | [diff] [blame] | 340 | disable_irq(host->irq); |
| 341 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 342 | if (host->pio_active == XFER_WRITE) |
| 343 | do_pio_write(host); |
| 344 | |
| 345 | if (host->pio_active == XFER_READ) |
| 346 | do_pio_read(host); |
| 347 | |
| 348 | if (host->complete_what == COMPLETION_FINALIZE) { |
| 349 | clear_imask(host); |
| 350 | if (host->pio_active != XFER_NONE) { |
| 351 | dbg(host, dbg_err, "unfinished %s " |
| 352 | "- pio_count:[%u] pio_words:[%u]\n", |
| 353 | (host->pio_active == XFER_READ) ? "read" : "write", |
| 354 | host->pio_count, host->pio_words); |
| 355 | |
Ben Dooks | 7c14450 | 2008-06-30 22:40:31 +0100 | [diff] [blame] | 356 | if (host->mrq->data) |
| 357 | host->mrq->data->error = -EINVAL; |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 358 | } |
| 359 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 360 | finalize_request(host); |
Roman Moracik | d643b5f | 2008-06-30 22:40:28 +0100 | [diff] [blame] | 361 | } else |
| 362 | enable_irq(host->irq); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 363 | } |
| 364 | |
| 365 | /* |
| 366 | * ISR for SDI Interface IRQ |
| 367 | * Communication between driver and ISR works as follows: |
| 368 | * host->mrq points to current request |
| 369 | * host->complete_what Indicates when the request is considered done |
| 370 | * COMPLETION_CMDSENT when the command was sent |
| 371 | * COMPLETION_RSPFIN when a response was received |
| 372 | * COMPLETION_XFERFINISH when the data transfer is finished |
| 373 | * COMPLETION_XFERFINISH_RSPFIN both of the above. |
| 374 | * host->complete_request is the completion-object the driver waits for |
| 375 | * |
| 376 | * 1) Driver sets up host->mrq and host->complete_what |
| 377 | * 2) Driver prepares the transfer |
| 378 | * 3) Driver enables interrupts |
| 379 | * 4) Driver starts transfer |
| 380 | * 5) Driver waits for host->complete_rquest |
| 381 | * 6) ISR checks for request status (errors and success) |
| 382 | * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error |
| 383 | * 7) ISR completes host->complete_request |
| 384 | * 8) ISR disables interrupts |
| 385 | * 9) Driver wakes up and takes care of the request |
| 386 | * |
| 387 | * Note: "->error"-fields are expected to be set to 0 before the request |
| 388 | * was issued by mmc.c - therefore they are only set, when an error |
| 389 | * contition comes up |
| 390 | */ |
| 391 | |
| 392 | static irqreturn_t s3cmci_irq(int irq, void *dev_id) |
| 393 | { |
| 394 | struct s3cmci_host *host = dev_id; |
| 395 | struct mmc_command *cmd; |
| 396 | u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; |
| 397 | u32 mci_cclear, mci_dclear; |
| 398 | unsigned long iflags; |
| 399 | |
| 400 | spin_lock_irqsave(&host->complete_lock, iflags); |
| 401 | |
| 402 | mci_csta = readl(host->base + S3C2410_SDICMDSTAT); |
| 403 | mci_dsta = readl(host->base + S3C2410_SDIDSTA); |
| 404 | mci_dcnt = readl(host->base + S3C2410_SDIDCNT); |
| 405 | mci_fsta = readl(host->base + S3C2410_SDIFSTA); |
| 406 | mci_imsk = readl(host->base + host->sdiimsk); |
| 407 | mci_cclear = 0; |
| 408 | mci_dclear = 0; |
| 409 | |
| 410 | if ((host->complete_what == COMPLETION_NONE) || |
| 411 | (host->complete_what == COMPLETION_FINALIZE)) { |
| 412 | host->status = "nothing to complete"; |
| 413 | clear_imask(host); |
| 414 | goto irq_out; |
| 415 | } |
| 416 | |
| 417 | if (!host->mrq) { |
| 418 | host->status = "no active mrq"; |
| 419 | clear_imask(host); |
| 420 | goto irq_out; |
| 421 | } |
| 422 | |
| 423 | cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd; |
| 424 | |
| 425 | if (!cmd) { |
| 426 | host->status = "no active cmd"; |
| 427 | clear_imask(host); |
| 428 | goto irq_out; |
| 429 | } |
| 430 | |
| 431 | if (!host->dodma) { |
| 432 | if ((host->pio_active == XFER_WRITE) && |
| 433 | (mci_fsta & S3C2410_SDIFSTA_TFDET)) { |
| 434 | |
| 435 | disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); |
| 436 | tasklet_schedule(&host->pio_tasklet); |
| 437 | host->status = "pio tx"; |
| 438 | } |
| 439 | |
| 440 | if ((host->pio_active == XFER_READ) && |
| 441 | (mci_fsta & S3C2410_SDIFSTA_RFDET)) { |
| 442 | |
| 443 | disable_imask(host, |
| 444 | S3C2410_SDIIMSK_RXFIFOHALF | |
| 445 | S3C2410_SDIIMSK_RXFIFOLAST); |
| 446 | |
| 447 | tasklet_schedule(&host->pio_tasklet); |
| 448 | host->status = "pio rx"; |
| 449 | } |
| 450 | } |
| 451 | |
| 452 | if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { |
Ben Dooks | ff8c804 | 2008-06-30 22:40:37 +0100 | [diff] [blame] | 453 | dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n"); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 454 | cmd->error = -ETIMEDOUT; |
| 455 | host->status = "error: command timeout"; |
| 456 | goto fail_transfer; |
| 457 | } |
| 458 | |
| 459 | if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) { |
| 460 | if (host->complete_what == COMPLETION_CMDSENT) { |
| 461 | host->status = "ok: command sent"; |
| 462 | goto close_transfer; |
| 463 | } |
| 464 | |
| 465 | mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT; |
| 466 | } |
| 467 | |
| 468 | if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { |
| 469 | if (cmd->flags & MMC_RSP_CRC) { |
Harald Welte | 679f0f8 | 2008-06-30 22:40:25 +0100 | [diff] [blame] | 470 | if (host->mrq->cmd->flags & MMC_RSP_136) { |
| 471 | dbg(host, dbg_irq, |
| 472 | "fixup: ignore CRC fail with long rsp\n"); |
| 473 | } else { |
| 474 | /* note, we used to fail the transfer |
| 475 | * here, but it seems that this is just |
| 476 | * the hardware getting it wrong. |
| 477 | * |
| 478 | * cmd->error = -EILSEQ; |
| 479 | * host->status = "error: bad command crc"; |
| 480 | * goto fail_transfer; |
| 481 | */ |
| 482 | } |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 483 | } |
| 484 | |
| 485 | mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; |
| 486 | } |
| 487 | |
| 488 | if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) { |
| 489 | if (host->complete_what == COMPLETION_RSPFIN) { |
| 490 | host->status = "ok: command response received"; |
| 491 | goto close_transfer; |
| 492 | } |
| 493 | |
| 494 | if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) |
| 495 | host->complete_what = COMPLETION_XFERFINISH; |
| 496 | |
| 497 | mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN; |
| 498 | } |
| 499 | |
| 500 | /* errors handled after this point are only relevant |
| 501 | when a data transfer is in progress */ |
| 502 | |
| 503 | if (!cmd->data) |
| 504 | goto clear_status_bits; |
| 505 | |
| 506 | /* Check for FIFO failure */ |
| 507 | if (host->is2440) { |
| 508 | if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { |
Ben Dooks | ff8c804 | 2008-06-30 22:40:37 +0100 | [diff] [blame] | 509 | dbg(host, dbg_err, "FIFO failure\n"); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 510 | host->mrq->data->error = -EILSEQ; |
| 511 | host->status = "error: 2440 fifo failure"; |
| 512 | goto fail_transfer; |
| 513 | } |
| 514 | } else { |
| 515 | if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { |
Ben Dooks | ff8c804 | 2008-06-30 22:40:37 +0100 | [diff] [blame] | 516 | dbg(host, dbg_err, "FIFO failure\n"); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 517 | cmd->data->error = -EILSEQ; |
| 518 | host->status = "error: fifo failure"; |
| 519 | goto fail_transfer; |
| 520 | } |
| 521 | } |
| 522 | |
| 523 | if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { |
Ben Dooks | ff8c804 | 2008-06-30 22:40:37 +0100 | [diff] [blame] | 524 | dbg(host, dbg_err, "bad data crc (outgoing)\n"); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 525 | cmd->data->error = -EILSEQ; |
| 526 | host->status = "error: bad data crc (outgoing)"; |
| 527 | goto fail_transfer; |
| 528 | } |
| 529 | |
| 530 | if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { |
Ben Dooks | ff8c804 | 2008-06-30 22:40:37 +0100 | [diff] [blame] | 531 | dbg(host, dbg_err, "bad data crc (incoming)\n"); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 532 | cmd->data->error = -EILSEQ; |
| 533 | host->status = "error: bad data crc (incoming)"; |
| 534 | goto fail_transfer; |
| 535 | } |
| 536 | |
| 537 | if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { |
Ben Dooks | ff8c804 | 2008-06-30 22:40:37 +0100 | [diff] [blame] | 538 | dbg(host, dbg_err, "data timeout\n"); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 539 | cmd->data->error = -ETIMEDOUT; |
| 540 | host->status = "error: data timeout"; |
| 541 | goto fail_transfer; |
| 542 | } |
| 543 | |
| 544 | if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) { |
| 545 | if (host->complete_what == COMPLETION_XFERFINISH) { |
| 546 | host->status = "ok: data transfer completed"; |
| 547 | goto close_transfer; |
| 548 | } |
| 549 | |
| 550 | if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) |
| 551 | host->complete_what = COMPLETION_RSPFIN; |
| 552 | |
| 553 | mci_dclear |= S3C2410_SDIDSTA_XFERFINISH; |
| 554 | } |
| 555 | |
| 556 | clear_status_bits: |
| 557 | writel(mci_cclear, host->base + S3C2410_SDICMDSTAT); |
| 558 | writel(mci_dclear, host->base + S3C2410_SDIDSTA); |
| 559 | |
| 560 | goto irq_out; |
| 561 | |
| 562 | fail_transfer: |
| 563 | host->pio_active = XFER_NONE; |
| 564 | |
| 565 | close_transfer: |
| 566 | host->complete_what = COMPLETION_FINALIZE; |
| 567 | |
| 568 | clear_imask(host); |
| 569 | tasklet_schedule(&host->pio_tasklet); |
| 570 | |
| 571 | goto irq_out; |
| 572 | |
| 573 | irq_out: |
| 574 | dbg(host, dbg_irq, |
| 575 | "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n", |
| 576 | mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status); |
| 577 | |
| 578 | spin_unlock_irqrestore(&host->complete_lock, iflags); |
| 579 | return IRQ_HANDLED; |
| 580 | |
| 581 | } |
| 582 | |
| 583 | /* |
| 584 | * ISR for the CardDetect Pin |
| 585 | */ |
| 586 | |
| 587 | static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) |
| 588 | { |
| 589 | struct s3cmci_host *host = (struct s3cmci_host *)dev_id; |
| 590 | |
| 591 | dbg(host, dbg_irq, "card detect\n"); |
| 592 | |
Ben Dooks | 2de5f79 | 2008-06-30 22:40:35 +0100 | [diff] [blame] | 593 | mmc_detect_change(host->mmc, msecs_to_jiffies(500)); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 594 | |
| 595 | return IRQ_HANDLED; |
| 596 | } |
| 597 | |
Ben Dooks | 5d30440 | 2008-08-08 10:55:41 +0100 | [diff] [blame] | 598 | static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, |
| 599 | void *buf_id, int size, |
| 600 | enum s3c2410_dma_buffresult result) |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 601 | { |
| 602 | struct s3cmci_host *host = buf_id; |
| 603 | unsigned long iflags; |
| 604 | u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt; |
| 605 | |
| 606 | mci_csta = readl(host->base + S3C2410_SDICMDSTAT); |
| 607 | mci_dsta = readl(host->base + S3C2410_SDIDSTA); |
| 608 | mci_fsta = readl(host->base + S3C2410_SDIFSTA); |
| 609 | mci_dcnt = readl(host->base + S3C2410_SDIDCNT); |
| 610 | |
| 611 | BUG_ON(!host->mrq); |
| 612 | BUG_ON(!host->mrq->data); |
| 613 | BUG_ON(!host->dmatogo); |
| 614 | |
| 615 | spin_lock_irqsave(&host->complete_lock, iflags); |
| 616 | |
| 617 | if (result != S3C2410_RES_OK) { |
| 618 | dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x " |
| 619 | "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n", |
| 620 | mci_csta, mci_dsta, mci_fsta, |
| 621 | mci_dcnt, result, host->dmatogo); |
| 622 | |
| 623 | goto fail_request; |
| 624 | } |
| 625 | |
| 626 | host->dmatogo--; |
| 627 | if (host->dmatogo) { |
| 628 | dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] " |
| 629 | "DCNT:[%08x] toGo:%u\n", |
| 630 | size, mci_dsta, mci_dcnt, host->dmatogo); |
| 631 | |
| 632 | goto out; |
| 633 | } |
| 634 | |
| 635 | dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", |
| 636 | size, mci_dsta, mci_dcnt); |
| 637 | |
| 638 | host->complete_what = COMPLETION_FINALIZE; |
| 639 | |
| 640 | out: |
| 641 | tasklet_schedule(&host->pio_tasklet); |
| 642 | spin_unlock_irqrestore(&host->complete_lock, iflags); |
| 643 | return; |
| 644 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 645 | fail_request: |
| 646 | host->mrq->data->error = -EINVAL; |
| 647 | host->complete_what = COMPLETION_FINALIZE; |
| 648 | writel(0, host->base + host->sdiimsk); |
| 649 | goto out; |
| 650 | |
| 651 | } |
| 652 | |
| 653 | static void finalize_request(struct s3cmci_host *host) |
| 654 | { |
| 655 | struct mmc_request *mrq = host->mrq; |
| 656 | struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; |
| 657 | int debug_as_failure = 0; |
| 658 | |
| 659 | if (host->complete_what != COMPLETION_FINALIZE) |
| 660 | return; |
| 661 | |
| 662 | if (!mrq) |
| 663 | return; |
| 664 | |
| 665 | if (cmd->data && (cmd->error == 0) && |
| 666 | (cmd->data->error == 0)) { |
| 667 | if (host->dodma && (!host->dma_complete)) { |
| 668 | dbg(host, dbg_dma, "DMA Missing!\n"); |
| 669 | return; |
| 670 | } |
| 671 | } |
| 672 | |
| 673 | /* Read response from controller. */ |
| 674 | cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0); |
| 675 | cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1); |
| 676 | cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2); |
| 677 | cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3); |
| 678 | |
| 679 | writel(host->prescaler, host->base + S3C2410_SDIPRE); |
| 680 | |
| 681 | if (cmd->error) |
| 682 | debug_as_failure = 1; |
| 683 | |
| 684 | if (cmd->data && cmd->data->error) |
| 685 | debug_as_failure = 1; |
| 686 | |
| 687 | dbg_dumpcmd(host, cmd, debug_as_failure); |
| 688 | |
| 689 | /* Cleanup controller */ |
| 690 | writel(0, host->base + S3C2410_SDICMDARG); |
Thomas Kleffel | bdbc9c3 | 2008-06-30 22:40:27 +0100 | [diff] [blame] | 691 | writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 692 | writel(0, host->base + S3C2410_SDICMDCON); |
| 693 | writel(0, host->base + host->sdiimsk); |
| 694 | |
| 695 | if (cmd->data && cmd->error) |
| 696 | cmd->data->error = cmd->error; |
| 697 | |
| 698 | if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) { |
| 699 | host->cmd_is_stop = 1; |
| 700 | s3cmci_send_request(host->mmc); |
| 701 | return; |
| 702 | } |
| 703 | |
| 704 | /* If we have no data transfer we are finished here */ |
| 705 | if (!mrq->data) |
| 706 | goto request_done; |
| 707 | |
| 708 | /* Calulate the amout of bytes transfer if there was no error */ |
| 709 | if (mrq->data->error == 0) { |
| 710 | mrq->data->bytes_xfered = |
| 711 | (mrq->data->blocks * mrq->data->blksz); |
| 712 | } else { |
| 713 | mrq->data->bytes_xfered = 0; |
| 714 | } |
| 715 | |
| 716 | /* If we had an error while transfering data we flush the |
| 717 | * DMA channel and the fifo to clear out any garbage. */ |
| 718 | if (mrq->data->error != 0) { |
| 719 | if (host->dodma) |
| 720 | s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); |
| 721 | |
| 722 | if (host->is2440) { |
| 723 | /* Clear failure register and reset fifo. */ |
| 724 | writel(S3C2440_SDIFSTA_FIFORESET | |
| 725 | S3C2440_SDIFSTA_FIFOFAIL, |
| 726 | host->base + S3C2410_SDIFSTA); |
| 727 | } else { |
| 728 | u32 mci_con; |
| 729 | |
| 730 | /* reset fifo */ |
| 731 | mci_con = readl(host->base + S3C2410_SDICON); |
| 732 | mci_con |= S3C2410_SDICON_FIFORESET; |
| 733 | |
| 734 | writel(mci_con, host->base + S3C2410_SDICON); |
| 735 | } |
| 736 | } |
| 737 | |
| 738 | request_done: |
| 739 | host->complete_what = COMPLETION_NONE; |
| 740 | host->mrq = NULL; |
| 741 | mmc_request_done(host->mmc, mrq); |
| 742 | } |
| 743 | |
Ben Dooks | 5d30440 | 2008-08-08 10:55:41 +0100 | [diff] [blame] | 744 | static void s3cmci_dma_setup(struct s3cmci_host *host, |
| 745 | enum s3c2410_dmasrc source) |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 746 | { |
| 747 | static enum s3c2410_dmasrc last_source = -1; |
| 748 | static int setup_ok; |
| 749 | |
| 750 | if (last_source == source) |
| 751 | return; |
| 752 | |
| 753 | last_source = source; |
| 754 | |
| 755 | s3c2410_dma_devconfig(host->dma, source, 3, |
| 756 | host->mem->start + host->sdidata); |
| 757 | |
| 758 | if (!setup_ok) { |
| 759 | s3c2410_dma_config(host->dma, 4, |
| 760 | (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); |
| 761 | s3c2410_dma_set_buffdone_fn(host->dma, |
| 762 | s3cmci_dma_done_callback); |
| 763 | s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); |
| 764 | setup_ok = 1; |
| 765 | } |
| 766 | } |
| 767 | |
| 768 | static void s3cmci_send_command(struct s3cmci_host *host, |
| 769 | struct mmc_command *cmd) |
| 770 | { |
| 771 | u32 ccon, imsk; |
| 772 | |
| 773 | imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT | |
| 774 | S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT | |
| 775 | S3C2410_SDIIMSK_RESPONSECRC; |
| 776 | |
| 777 | enable_imask(host, imsk); |
| 778 | |
| 779 | if (cmd->data) |
| 780 | host->complete_what = COMPLETION_XFERFINISH_RSPFIN; |
| 781 | else if (cmd->flags & MMC_RSP_PRESENT) |
| 782 | host->complete_what = COMPLETION_RSPFIN; |
| 783 | else |
| 784 | host->complete_what = COMPLETION_CMDSENT; |
| 785 | |
| 786 | writel(cmd->arg, host->base + S3C2410_SDICMDARG); |
| 787 | |
| 788 | ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX; |
| 789 | ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART; |
| 790 | |
| 791 | if (cmd->flags & MMC_RSP_PRESENT) |
| 792 | ccon |= S3C2410_SDICMDCON_WAITRSP; |
| 793 | |
| 794 | if (cmd->flags & MMC_RSP_136) |
| 795 | ccon |= S3C2410_SDICMDCON_LONGRSP; |
| 796 | |
| 797 | writel(ccon, host->base + S3C2410_SDICMDCON); |
| 798 | } |
| 799 | |
| 800 | static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) |
| 801 | { |
| 802 | u32 dcon, imsk, stoptries = 3; |
| 803 | |
| 804 | /* write DCON register */ |
| 805 | |
| 806 | if (!data) { |
| 807 | writel(0, host->base + S3C2410_SDIDCON); |
| 808 | return 0; |
| 809 | } |
| 810 | |
Ben Dooks | 7e9c7b6 | 2008-06-30 22:40:39 +0100 | [diff] [blame] | 811 | if ((data->blksz & 3) != 0) { |
| 812 | /* We cannot deal with unaligned blocks with more than |
| 813 | * one block being transfered. */ |
| 814 | |
| 815 | if (data->blocks > 1) |
| 816 | return -EINVAL; |
| 817 | |
| 818 | /* No support yet for non-word block transfers. */ |
| 819 | return -EINVAL; |
| 820 | } |
| 821 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 822 | while (readl(host->base + S3C2410_SDIDSTA) & |
| 823 | (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { |
| 824 | |
| 825 | dbg(host, dbg_err, |
| 826 | "mci_setup_data() transfer stillin progress.\n"); |
| 827 | |
Thomas Kleffel | bdbc9c3 | 2008-06-30 22:40:27 +0100 | [diff] [blame] | 828 | writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 829 | s3cmci_reset(host); |
| 830 | |
| 831 | if ((stoptries--) == 0) { |
| 832 | dbg_dumpregs(host, "DRF"); |
| 833 | return -EINVAL; |
| 834 | } |
| 835 | } |
| 836 | |
| 837 | dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; |
| 838 | |
| 839 | if (host->dodma) |
| 840 | dcon |= S3C2410_SDIDCON_DMAEN; |
| 841 | |
| 842 | if (host->bus_width == MMC_BUS_WIDTH_4) |
| 843 | dcon |= S3C2410_SDIDCON_WIDEBUS; |
| 844 | |
| 845 | if (!(data->flags & MMC_DATA_STREAM)) |
| 846 | dcon |= S3C2410_SDIDCON_BLOCKMODE; |
| 847 | |
| 848 | if (data->flags & MMC_DATA_WRITE) { |
| 849 | dcon |= S3C2410_SDIDCON_TXAFTERRESP; |
| 850 | dcon |= S3C2410_SDIDCON_XFER_TXSTART; |
| 851 | } |
| 852 | |
| 853 | if (data->flags & MMC_DATA_READ) { |
| 854 | dcon |= S3C2410_SDIDCON_RXAFTERCMD; |
| 855 | dcon |= S3C2410_SDIDCON_XFER_RXSTART; |
| 856 | } |
| 857 | |
| 858 | if (host->is2440) { |
| 859 | dcon |= S3C2440_SDIDCON_DS_WORD; |
| 860 | dcon |= S3C2440_SDIDCON_DATSTART; |
| 861 | } |
| 862 | |
| 863 | writel(dcon, host->base + S3C2410_SDIDCON); |
| 864 | |
| 865 | /* write BSIZE register */ |
| 866 | |
| 867 | writel(data->blksz, host->base + S3C2410_SDIBSIZE); |
| 868 | |
| 869 | /* add to IMASK register */ |
| 870 | imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC | |
| 871 | S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH; |
| 872 | |
| 873 | enable_imask(host, imsk); |
| 874 | |
| 875 | /* write TIMER register */ |
| 876 | |
| 877 | if (host->is2440) { |
| 878 | writel(0x007FFFFF, host->base + S3C2410_SDITIMER); |
| 879 | } else { |
| 880 | writel(0x0000FFFF, host->base + S3C2410_SDITIMER); |
| 881 | |
| 882 | /* FIX: set slow clock to prevent timeouts on read */ |
| 883 | if (data->flags & MMC_DATA_READ) |
| 884 | writel(0xFF, host->base + S3C2410_SDIPRE); |
| 885 | } |
| 886 | |
| 887 | return 0; |
| 888 | } |
| 889 | |
| 890 | #define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ) |
| 891 | |
| 892 | static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) |
| 893 | { |
| 894 | int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; |
| 895 | |
| 896 | BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); |
| 897 | |
| 898 | host->pio_sgptr = 0; |
| 899 | host->pio_words = 0; |
| 900 | host->pio_count = 0; |
| 901 | host->pio_active = rw ? XFER_WRITE : XFER_READ; |
| 902 | |
| 903 | if (rw) { |
| 904 | do_pio_write(host); |
| 905 | enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); |
| 906 | } else { |
| 907 | enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF |
| 908 | | S3C2410_SDIIMSK_RXFIFOLAST); |
| 909 | } |
| 910 | |
| 911 | return 0; |
| 912 | } |
| 913 | |
| 914 | static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) |
| 915 | { |
| 916 | int dma_len, i; |
| 917 | int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; |
| 918 | |
| 919 | BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); |
| 920 | |
| 921 | s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW); |
| 922 | s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); |
| 923 | |
| 924 | dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, |
| 925 | (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); |
| 926 | |
| 927 | if (dma_len == 0) |
| 928 | return -ENOMEM; |
| 929 | |
| 930 | host->dma_complete = 0; |
| 931 | host->dmatogo = dma_len; |
| 932 | |
| 933 | for (i = 0; i < dma_len; i++) { |
| 934 | int res; |
| 935 | |
| 936 | dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i, |
| 937 | sg_dma_address(&data->sg[i]), |
| 938 | sg_dma_len(&data->sg[i])); |
| 939 | |
| 940 | res = s3c2410_dma_enqueue(host->dma, (void *) host, |
| 941 | sg_dma_address(&data->sg[i]), |
| 942 | sg_dma_len(&data->sg[i])); |
| 943 | |
| 944 | if (res) { |
| 945 | s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); |
| 946 | return -EBUSY; |
| 947 | } |
| 948 | } |
| 949 | |
| 950 | s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); |
| 951 | |
| 952 | return 0; |
| 953 | } |
| 954 | |
| 955 | static void s3cmci_send_request(struct mmc_host *mmc) |
| 956 | { |
| 957 | struct s3cmci_host *host = mmc_priv(mmc); |
| 958 | struct mmc_request *mrq = host->mrq; |
| 959 | struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; |
| 960 | |
| 961 | host->ccnt++; |
| 962 | prepare_dbgmsg(host, cmd, host->cmd_is_stop); |
| 963 | |
| 964 | /* Clear command, data and fifo status registers |
| 965 | Fifo clear only necessary on 2440, but doesn't hurt on 2410 |
| 966 | */ |
| 967 | writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT); |
| 968 | writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA); |
| 969 | writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA); |
| 970 | |
| 971 | if (cmd->data) { |
| 972 | int res = s3cmci_setup_data(host, cmd->data); |
| 973 | |
| 974 | host->dcnt++; |
| 975 | |
| 976 | if (res) { |
Ben Dooks | ff8c804 | 2008-06-30 22:40:37 +0100 | [diff] [blame] | 977 | dbg(host, dbg_err, "setup data error %d\n", res); |
| 978 | cmd->error = res; |
| 979 | cmd->data->error = res; |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 980 | |
| 981 | mmc_request_done(mmc, mrq); |
| 982 | return; |
| 983 | } |
| 984 | |
| 985 | if (host->dodma) |
| 986 | res = s3cmci_prepare_dma(host, cmd->data); |
| 987 | else |
| 988 | res = s3cmci_prepare_pio(host, cmd->data); |
| 989 | |
| 990 | if (res) { |
Ben Dooks | ff8c804 | 2008-06-30 22:40:37 +0100 | [diff] [blame] | 991 | dbg(host, dbg_err, "data prepare error %d\n", res); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 992 | cmd->error = res; |
| 993 | cmd->data->error = res; |
| 994 | |
| 995 | mmc_request_done(mmc, mrq); |
| 996 | return; |
| 997 | } |
| 998 | } |
| 999 | |
| 1000 | /* Send command */ |
| 1001 | s3cmci_send_command(host, cmd); |
| 1002 | |
| 1003 | /* Enable Interrupt */ |
| 1004 | enable_irq(host->irq); |
| 1005 | } |
| 1006 | |
Ben Dooks | 87dd980 | 2008-08-12 09:24:50 +0100 | [diff] [blame] | 1007 | static int s3cmci_card_present(struct mmc_host *mmc) |
Ben Dooks | 50a8457 | 2008-06-30 22:40:36 +0100 | [diff] [blame] | 1008 | { |
Ben Dooks | 87dd980 | 2008-08-12 09:24:50 +0100 | [diff] [blame] | 1009 | struct s3cmci_host *host = mmc_priv(mmc); |
Ben Dooks | 50a8457 | 2008-06-30 22:40:36 +0100 | [diff] [blame] | 1010 | struct s3c24xx_mci_pdata *pdata = host->pdata; |
| 1011 | int ret; |
| 1012 | |
| 1013 | if (pdata->gpio_detect == 0) |
| 1014 | return -ENOSYS; |
| 1015 | |
| 1016 | ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1; |
| 1017 | return ret ^ pdata->detect_invert; |
| 1018 | } |
| 1019 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1020 | static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| 1021 | { |
| 1022 | struct s3cmci_host *host = mmc_priv(mmc); |
| 1023 | |
| 1024 | host->status = "mmc request"; |
| 1025 | host->cmd_is_stop = 0; |
| 1026 | host->mrq = mrq; |
| 1027 | |
Ben Dooks | 87dd980 | 2008-08-12 09:24:50 +0100 | [diff] [blame] | 1028 | if (s3cmci_card_present(mmc) == 0) { |
Ben Dooks | 50a8457 | 2008-06-30 22:40:36 +0100 | [diff] [blame] | 1029 | dbg(host, dbg_err, "%s: no medium present\n", __func__); |
| 1030 | host->mrq->cmd->error = -ENOMEDIUM; |
| 1031 | mmc_request_done(mmc, mrq); |
| 1032 | } else |
| 1033 | s3cmci_send_request(mmc); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1034 | } |
| 1035 | |
| 1036 | static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| 1037 | { |
| 1038 | struct s3cmci_host *host = mmc_priv(mmc); |
| 1039 | u32 mci_psc, mci_con; |
| 1040 | |
| 1041 | /* Set the power state */ |
| 1042 | |
| 1043 | mci_con = readl(host->base + S3C2410_SDICON); |
| 1044 | |
| 1045 | switch (ios->power_mode) { |
| 1046 | case MMC_POWER_ON: |
| 1047 | case MMC_POWER_UP: |
| 1048 | s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK); |
| 1049 | s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD); |
| 1050 | s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0); |
| 1051 | s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); |
| 1052 | s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); |
| 1053 | s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); |
| 1054 | |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1055 | if (host->pdata->set_power) |
| 1056 | host->pdata->set_power(ios->power_mode, ios->vdd); |
| 1057 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1058 | if (!host->is2440) |
| 1059 | mci_con |= S3C2410_SDICON_FIFORESET; |
| 1060 | |
| 1061 | break; |
| 1062 | |
| 1063 | case MMC_POWER_OFF: |
| 1064 | default: |
| 1065 | s3c2410_gpio_setpin(S3C2410_GPE5, 0); |
| 1066 | s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); |
| 1067 | |
| 1068 | if (host->is2440) |
| 1069 | mci_con |= S3C2440_SDICON_SDRESET; |
| 1070 | |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1071 | if (host->pdata->set_power) |
| 1072 | host->pdata->set_power(ios->power_mode, ios->vdd); |
| 1073 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1074 | break; |
| 1075 | } |
| 1076 | |
| 1077 | /* Set clock */ |
| 1078 | for (mci_psc = 0; mci_psc < 255; mci_psc++) { |
| 1079 | host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); |
| 1080 | |
| 1081 | if (host->real_rate <= ios->clock) |
| 1082 | break; |
| 1083 | } |
| 1084 | |
| 1085 | if (mci_psc > 255) |
| 1086 | mci_psc = 255; |
| 1087 | |
| 1088 | host->prescaler = mci_psc; |
| 1089 | writel(host->prescaler, host->base + S3C2410_SDIPRE); |
| 1090 | |
| 1091 | /* If requested clock is 0, real_rate will be 0, too */ |
| 1092 | if (ios->clock == 0) |
| 1093 | host->real_rate = 0; |
| 1094 | |
| 1095 | /* Set CLOCK_ENABLE */ |
| 1096 | if (ios->clock) |
| 1097 | mci_con |= S3C2410_SDICON_CLOCKTYPE; |
| 1098 | else |
| 1099 | mci_con &= ~S3C2410_SDICON_CLOCKTYPE; |
| 1100 | |
| 1101 | writel(mci_con, host->base + S3C2410_SDICON); |
| 1102 | |
| 1103 | if ((ios->power_mode == MMC_POWER_ON) || |
| 1104 | (ios->power_mode == MMC_POWER_UP)) { |
| 1105 | dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n", |
| 1106 | host->real_rate/1000, ios->clock/1000); |
| 1107 | } else { |
| 1108 | dbg(host, dbg_conf, "powered down.\n"); |
| 1109 | } |
| 1110 | |
| 1111 | host->bus_width = ios->bus_width; |
| 1112 | } |
| 1113 | |
| 1114 | static void s3cmci_reset(struct s3cmci_host *host) |
| 1115 | { |
| 1116 | u32 con = readl(host->base + S3C2410_SDICON); |
| 1117 | |
| 1118 | con |= S3C2440_SDICON_SDRESET; |
| 1119 | writel(con, host->base + S3C2410_SDICON); |
| 1120 | } |
| 1121 | |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1122 | static int s3cmci_get_ro(struct mmc_host *mmc) |
| 1123 | { |
| 1124 | struct s3cmci_host *host = mmc_priv(mmc); |
Ben Dooks | cf0984c | 2008-06-30 22:40:30 +0100 | [diff] [blame] | 1125 | struct s3c24xx_mci_pdata *pdata = host->pdata; |
| 1126 | int ret; |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1127 | |
Ben Dooks | cf0984c | 2008-06-30 22:40:30 +0100 | [diff] [blame] | 1128 | if (pdata->gpio_wprotect == 0) |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1129 | return 0; |
| 1130 | |
Ben Dooks | cf0984c | 2008-06-30 22:40:30 +0100 | [diff] [blame] | 1131 | ret = s3c2410_gpio_getpin(pdata->gpio_wprotect); |
| 1132 | |
| 1133 | if (pdata->wprotect_invert) |
| 1134 | ret = !ret; |
| 1135 | |
| 1136 | return ret; |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1137 | } |
| 1138 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1139 | static struct mmc_host_ops s3cmci_ops = { |
| 1140 | .request = s3cmci_request, |
| 1141 | .set_ios = s3cmci_set_ios, |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1142 | .get_ro = s3cmci_get_ro, |
Ben Dooks | 87dd980 | 2008-08-12 09:24:50 +0100 | [diff] [blame] | 1143 | .get_cd = s3cmci_card_present, |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1144 | }; |
| 1145 | |
| 1146 | static struct s3c24xx_mci_pdata s3cmci_def_pdata = { |
| 1147 | /* This is currently here to avoid a number of if (host->pdata) |
| 1148 | * checks. Any zero fields to ensure reaonable defaults are picked. */ |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1149 | }; |
| 1150 | |
| 1151 | static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) |
| 1152 | { |
| 1153 | struct s3cmci_host *host; |
| 1154 | struct mmc_host *mmc; |
| 1155 | int ret; |
| 1156 | |
| 1157 | mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); |
| 1158 | if (!mmc) { |
| 1159 | ret = -ENOMEM; |
| 1160 | goto probe_out; |
| 1161 | } |
| 1162 | |
| 1163 | host = mmc_priv(mmc); |
| 1164 | host->mmc = mmc; |
| 1165 | host->pdev = pdev; |
| 1166 | host->is2440 = is2440; |
| 1167 | |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1168 | host->pdata = pdev->dev.platform_data; |
| 1169 | if (!host->pdata) { |
| 1170 | pdev->dev.platform_data = &s3cmci_def_pdata; |
| 1171 | host->pdata = &s3cmci_def_pdata; |
| 1172 | } |
| 1173 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1174 | spin_lock_init(&host->complete_lock); |
| 1175 | tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); |
| 1176 | |
| 1177 | if (is2440) { |
| 1178 | host->sdiimsk = S3C2440_SDIIMSK; |
| 1179 | host->sdidata = S3C2440_SDIDATA; |
| 1180 | host->clk_div = 1; |
| 1181 | } else { |
| 1182 | host->sdiimsk = S3C2410_SDIIMSK; |
| 1183 | host->sdidata = S3C2410_SDIDATA; |
| 1184 | host->clk_div = 2; |
| 1185 | } |
| 1186 | |
| 1187 | host->dodma = 0; |
| 1188 | host->complete_what = COMPLETION_NONE; |
| 1189 | host->pio_active = XFER_NONE; |
| 1190 | |
| 1191 | host->dma = S3CMCI_DMA; |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1192 | |
| 1193 | host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 1194 | if (!host->mem) { |
| 1195 | dev_err(&pdev->dev, |
| 1196 | "failed to get io memory region resouce.\n"); |
| 1197 | |
| 1198 | ret = -ENOENT; |
| 1199 | goto probe_free_host; |
| 1200 | } |
| 1201 | |
| 1202 | host->mem = request_mem_region(host->mem->start, |
| 1203 | RESSIZE(host->mem), pdev->name); |
| 1204 | |
| 1205 | if (!host->mem) { |
| 1206 | dev_err(&pdev->dev, "failed to request io memory region.\n"); |
| 1207 | ret = -ENOENT; |
| 1208 | goto probe_free_host; |
| 1209 | } |
| 1210 | |
| 1211 | host->base = ioremap(host->mem->start, RESSIZE(host->mem)); |
Ben Dooks | 5d30440 | 2008-08-08 10:55:41 +0100 | [diff] [blame] | 1212 | if (!host->base) { |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1213 | dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); |
| 1214 | ret = -EINVAL; |
| 1215 | goto probe_free_mem_region; |
| 1216 | } |
| 1217 | |
| 1218 | host->irq = platform_get_irq(pdev, 0); |
| 1219 | if (host->irq == 0) { |
| 1220 | dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); |
| 1221 | ret = -EINVAL; |
| 1222 | goto probe_iounmap; |
| 1223 | } |
| 1224 | |
| 1225 | if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) { |
| 1226 | dev_err(&pdev->dev, "failed to request mci interrupt.\n"); |
| 1227 | ret = -ENOENT; |
| 1228 | goto probe_iounmap; |
| 1229 | } |
| 1230 | |
| 1231 | /* We get spurious interrupts even when we have set the IMSK |
| 1232 | * register to ignore everything, so use disable_irq() to make |
| 1233 | * ensure we don't lock the system with un-serviceable requests. */ |
| 1234 | |
| 1235 | disable_irq(host->irq); |
| 1236 | |
Ben Dooks | 55d70f5 | 2008-06-30 22:40:32 +0100 | [diff] [blame] | 1237 | host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1238 | |
Ben Dooks | 55d70f5 | 2008-06-30 22:40:32 +0100 | [diff] [blame] | 1239 | if (host->irq_cd >= 0) { |
| 1240 | if (request_irq(host->irq_cd, s3cmci_irq_cd, |
| 1241 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| 1242 | DRIVER_NAME, host)) { |
| 1243 | dev_err(&pdev->dev, "can't get card detect irq.\n"); |
| 1244 | ret = -ENOENT; |
| 1245 | goto probe_free_irq; |
| 1246 | } |
| 1247 | } else { |
| 1248 | dev_warn(&pdev->dev, "host detect has no irq available\n"); |
| 1249 | s3c2410_gpio_cfgpin(host->pdata->gpio_detect, |
| 1250 | S3C2410_GPIO_INPUT); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1251 | } |
| 1252 | |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1253 | if (host->pdata->gpio_wprotect) |
| 1254 | s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, |
| 1255 | S3C2410_GPIO_INPUT); |
| 1256 | |
Ben Dooks | 3886ff5 | 2008-06-30 22:40:33 +0100 | [diff] [blame] | 1257 | if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) { |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1258 | dev_err(&pdev->dev, "unable to get DMA channel.\n"); |
| 1259 | ret = -EBUSY; |
| 1260 | goto probe_free_irq_cd; |
| 1261 | } |
| 1262 | |
| 1263 | host->clk = clk_get(&pdev->dev, "sdi"); |
| 1264 | if (IS_ERR(host->clk)) { |
| 1265 | dev_err(&pdev->dev, "failed to find clock source.\n"); |
| 1266 | ret = PTR_ERR(host->clk); |
| 1267 | host->clk = NULL; |
| 1268 | goto probe_free_host; |
| 1269 | } |
| 1270 | |
| 1271 | ret = clk_enable(host->clk); |
| 1272 | if (ret) { |
| 1273 | dev_err(&pdev->dev, "failed to enable clock source.\n"); |
| 1274 | goto clk_free; |
| 1275 | } |
| 1276 | |
| 1277 | host->clk_rate = clk_get_rate(host->clk); |
| 1278 | |
| 1279 | mmc->ops = &s3cmci_ops; |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1280 | mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1281 | mmc->caps = MMC_CAP_4_BIT_DATA; |
| 1282 | mmc->f_min = host->clk_rate / (host->clk_div * 256); |
| 1283 | mmc->f_max = host->clk_rate / host->clk_div; |
| 1284 | |
Ben Dooks | edb5a98 | 2008-06-30 22:40:29 +0100 | [diff] [blame] | 1285 | if (host->pdata->ocr_avail) |
| 1286 | mmc->ocr_avail = host->pdata->ocr_avail; |
| 1287 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1288 | mmc->max_blk_count = 4095; |
| 1289 | mmc->max_blk_size = 4095; |
| 1290 | mmc->max_req_size = 4095 * 512; |
| 1291 | mmc->max_seg_size = mmc->max_req_size; |
| 1292 | |
| 1293 | mmc->max_phys_segs = 128; |
| 1294 | mmc->max_hw_segs = 128; |
| 1295 | |
| 1296 | dbg(host, dbg_debug, |
| 1297 | "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n", |
| 1298 | (host->is2440?"2440":""), |
| 1299 | host->base, host->irq, host->irq_cd, host->dma); |
| 1300 | |
| 1301 | ret = mmc_add_host(mmc); |
| 1302 | if (ret) { |
| 1303 | dev_err(&pdev->dev, "failed to add mmc host.\n"); |
| 1304 | goto free_dmabuf; |
| 1305 | } |
| 1306 | |
| 1307 | platform_set_drvdata(pdev, mmc); |
| 1308 | dev_info(&pdev->dev, "initialisation done.\n"); |
| 1309 | |
| 1310 | return 0; |
| 1311 | |
| 1312 | free_dmabuf: |
| 1313 | clk_disable(host->clk); |
| 1314 | |
| 1315 | clk_free: |
| 1316 | clk_put(host->clk); |
| 1317 | |
| 1318 | probe_free_irq_cd: |
Ben Dooks | 55d70f5 | 2008-06-30 22:40:32 +0100 | [diff] [blame] | 1319 | if (host->irq_cd >= 0) |
| 1320 | free_irq(host->irq_cd, host); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1321 | |
| 1322 | probe_free_irq: |
| 1323 | free_irq(host->irq, host); |
| 1324 | |
| 1325 | probe_iounmap: |
| 1326 | iounmap(host->base); |
| 1327 | |
| 1328 | probe_free_mem_region: |
| 1329 | release_mem_region(host->mem->start, RESSIZE(host->mem)); |
| 1330 | |
| 1331 | probe_free_host: |
| 1332 | mmc_free_host(mmc); |
| 1333 | probe_out: |
| 1334 | return ret; |
| 1335 | } |
| 1336 | |
Ben Dooks | 907b2cd | 2008-07-17 15:32:54 +0100 | [diff] [blame] | 1337 | static void s3cmci_shutdown(struct platform_device *pdev) |
| 1338 | { |
| 1339 | struct mmc_host *mmc = platform_get_drvdata(pdev); |
| 1340 | struct s3cmci_host *host = mmc_priv(mmc); |
| 1341 | |
| 1342 | if (host->irq_cd >= 0) |
| 1343 | free_irq(host->irq_cd, host); |
| 1344 | |
| 1345 | mmc_remove_host(mmc); |
| 1346 | clk_disable(host->clk); |
| 1347 | } |
| 1348 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1349 | static int __devexit s3cmci_remove(struct platform_device *pdev) |
| 1350 | { |
| 1351 | struct mmc_host *mmc = platform_get_drvdata(pdev); |
| 1352 | struct s3cmci_host *host = mmc_priv(mmc); |
| 1353 | |
Ben Dooks | 907b2cd | 2008-07-17 15:32:54 +0100 | [diff] [blame] | 1354 | s3cmci_shutdown(pdev); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1355 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1356 | clk_put(host->clk); |
| 1357 | |
| 1358 | tasklet_disable(&host->pio_tasklet); |
Harald Welte | ceb3ac2 | 2008-06-30 22:40:26 +0100 | [diff] [blame] | 1359 | s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1360 | |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1361 | free_irq(host->irq, host); |
| 1362 | |
| 1363 | iounmap(host->base); |
| 1364 | release_mem_region(host->mem->start, RESSIZE(host->mem)); |
| 1365 | |
| 1366 | mmc_free_host(mmc); |
| 1367 | return 0; |
| 1368 | } |
| 1369 | |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1370 | static int __devinit s3cmci_2410_probe(struct platform_device *dev) |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1371 | { |
| 1372 | return s3cmci_probe(dev, 0); |
| 1373 | } |
| 1374 | |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1375 | static int __devinit s3cmci_2412_probe(struct platform_device *dev) |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1376 | { |
| 1377 | return s3cmci_probe(dev, 1); |
| 1378 | } |
| 1379 | |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1380 | static int __devinit s3cmci_2440_probe(struct platform_device *dev) |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1381 | { |
| 1382 | return s3cmci_probe(dev, 1); |
| 1383 | } |
| 1384 | |
| 1385 | #ifdef CONFIG_PM |
| 1386 | |
| 1387 | static int s3cmci_suspend(struct platform_device *dev, pm_message_t state) |
| 1388 | { |
| 1389 | struct mmc_host *mmc = platform_get_drvdata(dev); |
| 1390 | |
| 1391 | return mmc_suspend_host(mmc, state); |
| 1392 | } |
| 1393 | |
| 1394 | static int s3cmci_resume(struct platform_device *dev) |
| 1395 | { |
| 1396 | struct mmc_host *mmc = platform_get_drvdata(dev); |
| 1397 | |
| 1398 | return mmc_resume_host(mmc); |
| 1399 | } |
| 1400 | |
| 1401 | #else /* CONFIG_PM */ |
| 1402 | #define s3cmci_suspend NULL |
| 1403 | #define s3cmci_resume NULL |
| 1404 | #endif /* CONFIG_PM */ |
| 1405 | |
| 1406 | |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1407 | static struct platform_driver s3cmci_2410_driver = { |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1408 | .driver.name = "s3c2410-sdi", |
| 1409 | .driver.owner = THIS_MODULE, |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1410 | .probe = s3cmci_2410_probe, |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1411 | .remove = __devexit_p(s3cmci_remove), |
Ben Dooks | 907b2cd | 2008-07-17 15:32:54 +0100 | [diff] [blame] | 1412 | .shutdown = s3cmci_shutdown, |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1413 | .suspend = s3cmci_suspend, |
| 1414 | .resume = s3cmci_resume, |
| 1415 | }; |
| 1416 | |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1417 | static struct platform_driver s3cmci_2412_driver = { |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1418 | .driver.name = "s3c2412-sdi", |
| 1419 | .driver.owner = THIS_MODULE, |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1420 | .probe = s3cmci_2412_probe, |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1421 | .remove = __devexit_p(s3cmci_remove), |
Ben Dooks | 907b2cd | 2008-07-17 15:32:54 +0100 | [diff] [blame] | 1422 | .shutdown = s3cmci_shutdown, |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1423 | .suspend = s3cmci_suspend, |
| 1424 | .resume = s3cmci_resume, |
| 1425 | }; |
| 1426 | |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1427 | static struct platform_driver s3cmci_2440_driver = { |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1428 | .driver.name = "s3c2440-sdi", |
| 1429 | .driver.owner = THIS_MODULE, |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1430 | .probe = s3cmci_2440_probe, |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1431 | .remove = __devexit_p(s3cmci_remove), |
Ben Dooks | 907b2cd | 2008-07-17 15:32:54 +0100 | [diff] [blame] | 1432 | .shutdown = s3cmci_shutdown, |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1433 | .suspend = s3cmci_suspend, |
| 1434 | .resume = s3cmci_resume, |
| 1435 | }; |
| 1436 | |
| 1437 | |
| 1438 | static int __init s3cmci_init(void) |
| 1439 | { |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1440 | platform_driver_register(&s3cmci_2410_driver); |
| 1441 | platform_driver_register(&s3cmci_2412_driver); |
| 1442 | platform_driver_register(&s3cmci_2440_driver); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1443 | return 0; |
| 1444 | } |
| 1445 | |
| 1446 | static void __exit s3cmci_exit(void) |
| 1447 | { |
Ben Dooks | d2f2761 | 2008-07-17 11:54:01 +0100 | [diff] [blame] | 1448 | platform_driver_unregister(&s3cmci_2410_driver); |
| 1449 | platform_driver_unregister(&s3cmci_2412_driver); |
| 1450 | platform_driver_unregister(&s3cmci_2440_driver); |
Thomas Kleffel | be51801 | 2008-06-30 22:40:24 +0100 | [diff] [blame] | 1451 | } |
| 1452 | |
| 1453 | module_init(s3cmci_init); |
| 1454 | module_exit(s3cmci_exit); |
| 1455 | |
| 1456 | MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); |
| 1457 | MODULE_LICENSE("GPL v2"); |
| 1458 | MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>"); |
Ben Dooks | 318f905 | 2008-06-30 22:40:34 +0100 | [diff] [blame] | 1459 | MODULE_ALIAS("platform:s3c2410-sdi"); |
| 1460 | MODULE_ALIAS("platform:s3c2412-sdi"); |
| 1461 | MODULE_ALIAS("platform:s3c2440-sdi"); |