Patrick Boettcher | bc2e391 | 2006-12-02 21:16:04 -0200 | [diff] [blame] | 1 | /* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones |
| 2 | * (e.g. Pinnacle 400e DVB-S USB2.0). |
| 3 | * |
| 4 | * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes. |
| 5 | * |
| 6 | * TDA8263 + TDA10086 |
| 7 | * |
| 8 | * I2C addresses: |
| 9 | * 0x08 - LNBP21PD - LNB power supply |
| 10 | * 0x0e - TDA10086 - Demodulator |
| 11 | * 0x50 - FX2 eeprom |
| 12 | * 0x60 - TDA8263 - Tuner |
| 13 | * 0x78 ??? |
| 14 | * |
| 15 | * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> |
| 16 | * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> |
| 17 | * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org> |
| 18 | * |
| 19 | * This program is free software; you can redistribute it and/or modify it |
| 20 | * under the terms of the GNU General Public License as published by the Free |
| 21 | * Software Foundation, version 2. |
| 22 | * |
| 23 | * see Documentation/dvb/README.dvb-usb for more information |
| 24 | */ |
| 25 | #define DVB_USB_LOG_PREFIX "ttusb2" |
| 26 | #include "dvb-usb.h" |
| 27 | |
| 28 | #include "ttusb2.h" |
| 29 | |
| 30 | #include "tda826x.h" |
| 31 | #include "tda10086.h" |
| 32 | #include "lnbp21.h" |
| 33 | |
| 34 | /* debug */ |
| 35 | static int dvb_usb_ttusb2_debug; |
| 36 | #define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args) |
| 37 | module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644); |
| 38 | MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); |
| 39 | |
| 40 | struct ttusb2_state { |
| 41 | u8 id; |
| 42 | }; |
| 43 | |
| 44 | static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, |
| 45 | u8 *wbuf, int wlen, u8 *rbuf, int rlen) |
| 46 | { |
| 47 | struct ttusb2_state *st = d->priv; |
| 48 | u8 s[wlen+4],r[64] = { 0 }; |
| 49 | int ret = 0; |
| 50 | |
| 51 | memset(s,0,wlen+4); |
| 52 | |
| 53 | s[0] = 0xaa; |
| 54 | s[1] = ++st->id; |
| 55 | s[2] = cmd; |
| 56 | s[3] = wlen; |
| 57 | memcpy(&s[4],wbuf,wlen); |
| 58 | |
| 59 | ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0); |
| 60 | |
| 61 | if (ret != 0 || |
| 62 | r[0] != 0x55 || |
| 63 | r[1] != s[1] || |
| 64 | r[2] != cmd || |
| 65 | (rlen > 0 && r[3] != rlen)) { |
| 66 | warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]); |
| 67 | return -EIO; |
| 68 | } |
| 69 | |
| 70 | if (rlen > 0) |
| 71 | memcpy(rbuf, &r[4], rlen); |
| 72 | |
| 73 | return 0; |
| 74 | } |
| 75 | |
| 76 | static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) |
| 77 | { |
| 78 | struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| 79 | static u8 obuf[60], ibuf[60]; |
| 80 | int i,read; |
| 81 | |
| 82 | if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| 83 | return -EAGAIN; |
| 84 | |
| 85 | if (num > 2) |
| 86 | warn("more than 2 i2c messages at a time is not handled yet. TODO."); |
| 87 | |
| 88 | for (i = 0; i < num; i++) { |
| 89 | read = i+1 < num && (msg[i+1].flags & I2C_M_RD); |
| 90 | |
| 91 | obuf[0] = (msg[i].addr << 1) | read; |
| 92 | obuf[1] = msg[i].len; |
| 93 | |
| 94 | /* read request */ |
| 95 | if (read) |
| 96 | obuf[2] = msg[i+1].len; |
| 97 | else |
| 98 | obuf[2] = 0; |
| 99 | |
| 100 | memcpy(&obuf[3],msg[i].buf,msg[i].len); |
| 101 | |
| 102 | if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) { |
| 103 | err("i2c transfer failed."); |
| 104 | break; |
| 105 | } |
| 106 | |
| 107 | if (read) { |
| 108 | memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len); |
| 109 | i++; |
| 110 | } |
| 111 | } |
| 112 | |
| 113 | mutex_unlock(&d->i2c_mutex); |
| 114 | return i; |
| 115 | } |
| 116 | |
| 117 | static u32 ttusb2_i2c_func(struct i2c_adapter *adapter) |
| 118 | { |
| 119 | return I2C_FUNC_I2C; |
| 120 | } |
| 121 | |
| 122 | static struct i2c_algorithm ttusb2_i2c_algo = { |
| 123 | .master_xfer = ttusb2_i2c_xfer, |
| 124 | .functionality = ttusb2_i2c_func, |
| 125 | }; |
| 126 | |
| 127 | /* Callbacks for DVB USB */ |
| 128 | static int ttusb2_identify_state (struct usb_device *udev, struct |
| 129 | dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, |
| 130 | int *cold) |
| 131 | { |
| 132 | *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; |
| 133 | return 0; |
| 134 | } |
| 135 | |
| 136 | static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff) |
| 137 | { |
| 138 | u8 b = onoff; |
| 139 | ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0); |
| 140 | return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0); |
| 141 | } |
| 142 | |
| 143 | |
| 144 | static struct tda10086_config tda10086_config = { |
| 145 | .demod_address = 0x0e, |
| 146 | .invert = 0, |
| 147 | }; |
| 148 | |
| 149 | static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap) |
| 150 | { |
| 151 | if (usb_set_interface(adap->dev->udev,0,3) < 0) |
| 152 | err("set interface to alts=3 failed"); |
| 153 | |
| 154 | if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) { |
| 155 | deb_info("TDA10086 attach failed\n"); |
| 156 | return -ENODEV; |
| 157 | } |
| 158 | |
| 159 | return 0; |
| 160 | } |
| 161 | |
| 162 | static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap) |
| 163 | { |
| 164 | if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) { |
| 165 | deb_info("TDA8263 attach failed\n"); |
| 166 | return -ENODEV; |
| 167 | } |
| 168 | |
| 169 | if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) { |
| 170 | deb_info("LNBP21 attach failed\n"); |
| 171 | return -ENODEV; |
| 172 | } |
| 173 | return 0; |
| 174 | } |
| 175 | |
| 176 | /* DVB USB Driver stuff */ |
| 177 | static struct dvb_usb_device_properties ttusb2_properties; |
| 178 | |
| 179 | static int ttusb2_probe(struct usb_interface *intf, |
| 180 | const struct usb_device_id *id) |
| 181 | { |
| 182 | return dvb_usb_device_init(intf,&ttusb2_properties,THIS_MODULE,NULL); |
| 183 | } |
| 184 | |
| 185 | static struct usb_device_id ttusb2_table [] = { |
| 186 | { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) }, |
Christophe Cattelain | ddc9ece | 2007-04-27 12:31:32 -0300 | [diff] [blame] | 187 | { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) }, |
Patrick Boettcher | bc2e391 | 2006-12-02 21:16:04 -0200 | [diff] [blame] | 188 | {} /* Terminating entry */ |
| 189 | }; |
| 190 | MODULE_DEVICE_TABLE (usb, ttusb2_table); |
| 191 | |
| 192 | static struct dvb_usb_device_properties ttusb2_properties = { |
| 193 | .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| 194 | |
| 195 | .usb_ctrl = CYPRESS_FX2, |
| 196 | .firmware = "dvb-usb-pctv-400e-01.fw", |
| 197 | |
| 198 | .size_of_priv = sizeof(struct ttusb2_state), |
| 199 | |
| 200 | .num_adapters = 1, |
| 201 | .adapter = { |
| 202 | { |
| 203 | .streaming_ctrl = NULL, // ttusb2_streaming_ctrl, |
| 204 | |
| 205 | .frontend_attach = ttusb2_frontend_attach, |
| 206 | .tuner_attach = ttusb2_tuner_attach, |
| 207 | |
| 208 | /* parameter for the MPEG2-data transfer */ |
| 209 | .stream = { |
| 210 | .type = USB_ISOC, |
| 211 | .count = 5, |
| 212 | .endpoint = 0x02, |
| 213 | .u = { |
| 214 | .isoc = { |
| 215 | .framesperurb = 4, |
| 216 | .framesize = 940, |
| 217 | .interval = 1, |
| 218 | } |
| 219 | } |
| 220 | } |
| 221 | } |
| 222 | }, |
| 223 | |
| 224 | .power_ctrl = ttusb2_power_ctrl, |
| 225 | .identify_state = ttusb2_identify_state, |
| 226 | |
| 227 | .i2c_algo = &ttusb2_i2c_algo, |
| 228 | |
| 229 | .generic_bulk_ctrl_endpoint = 0x01, |
| 230 | |
Christophe Cattelain | ddc9ece | 2007-04-27 12:31:32 -0300 | [diff] [blame] | 231 | .num_device_descs = 2, |
Patrick Boettcher | bc2e391 | 2006-12-02 21:16:04 -0200 | [diff] [blame] | 232 | .devices = { |
| 233 | { "Pinnacle 400e DVB-S USB2.0", |
| 234 | { &ttusb2_table[0], NULL }, |
| 235 | { NULL }, |
| 236 | }, |
Christophe Cattelain | ddc9ece | 2007-04-27 12:31:32 -0300 | [diff] [blame] | 237 | { "Pinnacle 450e DVB-S USB2.0", |
| 238 | { &ttusb2_table[1], NULL }, |
| 239 | { NULL }, |
| 240 | }, |
Patrick Boettcher | bc2e391 | 2006-12-02 21:16:04 -0200 | [diff] [blame] | 241 | } |
| 242 | }; |
| 243 | |
| 244 | static struct usb_driver ttusb2_driver = { |
| 245 | .name = "dvb_usb_ttusb2", |
| 246 | .probe = ttusb2_probe, |
| 247 | .disconnect = dvb_usb_device_exit, |
| 248 | .id_table = ttusb2_table, |
| 249 | }; |
| 250 | |
| 251 | /* module stuff */ |
| 252 | static int __init ttusb2_module_init(void) |
| 253 | { |
| 254 | int result; |
| 255 | if ((result = usb_register(&ttusb2_driver))) { |
| 256 | err("usb_register failed. Error number %d",result); |
| 257 | return result; |
| 258 | } |
| 259 | |
| 260 | return 0; |
| 261 | } |
| 262 | |
| 263 | static void __exit ttusb2_module_exit(void) |
| 264 | { |
| 265 | /* deregister this driver from the USB subsystem */ |
| 266 | usb_deregister(&ttusb2_driver); |
| 267 | } |
| 268 | |
| 269 | module_init (ttusb2_module_init); |
| 270 | module_exit (ttusb2_module_exit); |
| 271 | |
| 272 | MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); |
| 273 | MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0"); |
| 274 | MODULE_VERSION("1.0"); |
| 275 | MODULE_LICENSE("GPL"); |