Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / 9d6f89cb2343ff5adaccb77a177fdc6c3844c65d / . / drivers / usb / otg / mv_otg.h
blob: 8a9e351b36ba01ab28687be44340642f152c7ed2 [file] [log] [blame]
Neil Zhang277164f2011-12-20 13:20:22 +0800[diff] [blame]1/*
2 * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 */
9
10#ifndef __MV_USB_OTG_CONTROLLER__
11#define __MV_USB_OTG_CONTROLLER__
12
13#include <linux/types.h>
14
15/* Command Register Bit Masks */
16#define USBCMD_RUN_STOP (0x00000001)
17#define USBCMD_CTRL_RESET (0x00000002)
18
19/* otgsc Register Bit Masks */
20#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001
21#define OTGSC_CTRL_VUSB_CHARGE 0x00000002
22#define OTGSC_CTRL_OTG_TERM 0x00000008
23#define OTGSC_CTRL_DATA_PULSING 0x00000010
24#define OTGSC_STS_USB_ID 0x00000100
25#define OTGSC_STS_A_VBUS_VALID 0x00000200
26#define OTGSC_STS_A_SESSION_VALID 0x00000400
27#define OTGSC_STS_B_SESSION_VALID 0x00000800
28#define OTGSC_STS_B_SESSION_END 0x00001000
29#define OTGSC_STS_1MS_TOGGLE 0x00002000
30#define OTGSC_STS_DATA_PULSING 0x00004000
31#define OTGSC_INTSTS_USB_ID 0x00010000
32#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000
33#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000
34#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000
35#define OTGSC_INTSTS_B_SESSION_END 0x00100000
36#define OTGSC_INTSTS_1MS 0x00200000
37#define OTGSC_INTSTS_DATA_PULSING 0x00400000
38#define OTGSC_INTR_USB_ID 0x01000000
39#define OTGSC_INTR_A_VBUS_VALID 0x02000000
40#define OTGSC_INTR_A_SESSION_VALID 0x04000000
41#define OTGSC_INTR_B_SESSION_VALID 0x08000000
42#define OTGSC_INTR_B_SESSION_END 0x10000000
43#define OTGSC_INTR_1MS_TIMER 0x20000000
44#define OTGSC_INTR_DATA_PULSING 0x40000000
45
46#define CAPLENGTH_MASK (0xff)
47
48/* Timer's interval, unit 10ms */
49#define T_A_WAIT_VRISE 100
50#define T_A_WAIT_BCON 2000
51#define T_A_AIDL_BDIS 100
52#define T_A_BIDL_ADIS 20
53#define T_B_ASE0_BRST 400
54#define T_B_SE0_SRP 300
55#define T_B_SRP_FAIL 2000
56#define T_B_DATA_PLS 10
57#define T_B_SRP_INIT 100
58#define T_A_SRP_RSPNS 10
59#define T_A_DRV_RSM 5
60
61enum otg_function {
62 OTG_B_DEVICE = 0,
63 OTG_A_DEVICE
64};
65
66enum mv_otg_timer {
67 A_WAIT_BCON_TIMER = 0,
68 OTG_TIMER_NUM
69};
70
71/* PXA OTG state machine */
72struct mv_otg_ctrl {
73 /* internal variables */
74 u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */
75 u8 b_srp_done;
76 u8 b_hnp_en;
77
78 /* OTG inputs */
79 u8 a_bus_drop;
80 u8 a_bus_req;
81 u8 a_clr_err;
82 u8 a_bus_resume;
83 u8 a_bus_suspend;
84 u8 a_conn;
85 u8 a_sess_vld;
86 u8 a_srp_det;
87 u8 a_vbus_vld;
88 u8 b_bus_req; /* B-Device Require Bus */
89 u8 b_bus_resume;
90 u8 b_bus_suspend;
91 u8 b_conn;
92 u8 b_se0_srp;
93 u8 b_sess_end;
94 u8 b_sess_vld;
95 u8 id;
96 u8 a_suspend_req;
97
98 /*Timer event */
99 u8 a_aidl_bdis_timeout;
100 u8 b_ase0_brst_timeout;
101 u8 a_bidl_adis_timeout;
102 u8 a_wait_bcon_timeout;
103
104 struct timer_list timer[OTG_TIMER_NUM];
105};
106
107#define VUSBHS_MAX_PORTS 8
108
109struct mv_otg_regs {
110 u32 usbcmd; /* Command register */
111 u32 usbsts; /* Status register */
112 u32 usbintr; /* Interrupt enable */
113 u32 frindex; /* Frame index */
114 u32 reserved1[1];
115 u32 deviceaddr; /* Device Address */
116 u32 eplistaddr; /* Endpoint List Address */
117 u32 ttctrl; /* HOST TT status and control */
118 u32 burstsize; /* Programmable Burst Size */
119 u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */
120 u32 reserved[4];
121 u32 epnak; /* Endpoint NAK */
122 u32 epnaken; /* Endpoint NAK Enable */
123 u32 configflag; /* Configured Flag register */
124 u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
125 u32 otgsc;
126 u32 usbmode; /* USB Host/Device mode */
127 u32 epsetupstat; /* Endpoint Setup Status */
128 u32 epprime; /* Endpoint Initialize */
129 u32 epflush; /* Endpoint De-initialize */
130 u32 epstatus; /* Endpoint Status */
131 u32 epcomplete; /* Endpoint Interrupt On Complete */
132 u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */
133 u32 mcr; /* Mux Control */
134 u32 isr; /* Interrupt Status */
135 u32 ier; /* Interrupt Enable */
136};
137
138struct mv_otg {
Heikki Krogerusb1c711d2012-02-13 13:24:17 +0200[diff] [blame]139 struct usb_phy phy;
Neil Zhang277164f2011-12-20 13:20:22 +0800[diff] [blame]140 struct mv_otg_ctrl otg_ctrl;
141
142 /* base address */
143 void __iomem *phy_regs;
144 void __iomem *cap_regs;
145 struct mv_otg_regs __iomem *op_regs;
146
147 struct platform_device *pdev;
148 int irq;
149 u32 irq_status;
150 u32 irq_en;
151
152 struct delayed_work work;
153 struct workqueue_struct *qwork;
154
155 spinlock_t wq_lock;
156
157 struct mv_usb_platform_data *pdata;
158
159 unsigned int active;
160 unsigned int clock_gating;
161 unsigned int clknum;
162 struct clk *clk[0];
163};
164
165#endif