blob: 36b380aad006d9c5fd32a9a986c58b6b47abaf81 [file] [log] [blame]
Steve Birtles3ad09202008-02-09 04:49:55 +01001/*
2 * linux/arch/arm/mach-at91/board-yl-9200.c
3 *
Andrew Victore3ba22d2008-05-24 17:06:45 +01004 * Adapted from various board files in arch/arm/mach-at91
5 *
6 * Modifications for YL-9200 platform:
7 * Copyright (C) 2007 S. Birtles
Steve Birtles3ad09202008-02-09 04:49:55 +01008 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#include <linux/types.h>
25#include <linux/init.h>
26#include <linux/mm.h>
27#include <linux/module.h>
Andrew Victore3ba22d2008-05-24 17:06:45 +010028#include <linux/dma-mapping.h>
Steve Birtles3ad09202008-02-09 04:49:55 +010029#include <linux/platform_device.h>
30#include <linux/spi/spi.h>
Steve Birtles3ad09202008-02-09 04:49:55 +010031#include <linux/spi/ads7846.h>
32#include <linux/mtd/physmap.h>
Andrew Victore3ba22d2008-05-24 17:06:45 +010033#include <linux/gpio_keys.h>
34#include <linux/input.h>
Steve Birtles3ad09202008-02-09 04:49:55 +010035
Russell Kinga09e64f2008-08-05 16:14:15 +010036#include <mach/hardware.h>
Steve Birtles3ad09202008-02-09 04:49:55 +010037#include <asm/setup.h>
38#include <asm/mach-types.h>
39#include <asm/irq.h>
40
41#include <asm/mach/arch.h>
42#include <asm/mach/map.h>
43#include <asm/mach/irq.h>
44
Russell Kinga09e64f2008-08-05 16:14:15 +010045#include <mach/board.h>
46#include <mach/gpio.h>
47#include <mach/at91rm9200_mc.h>
Steve Birtles3ad09202008-02-09 04:49:55 +010048
49#include "generic.h"
Steve Birtles3ad09202008-02-09 04:49:55 +010050
Steve Birtles3ad09202008-02-09 04:49:55 +010051
Andrew Victore3ba22d2008-05-24 17:06:45 +010052static void __init yl9200_map_io(void)
Steve Birtles3ad09202008-02-09 04:49:55 +010053{
54 /* Initialize processor: 18.432 MHz crystal */
Andrew Victore3ba22d2008-05-24 17:06:45 +010055 at91rm9200_initialize(18432000, AT91RM9200_PQFP);
Steve Birtles3ad09202008-02-09 04:49:55 +010056
Andrew Victore3ba22d2008-05-24 17:06:45 +010057 /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
58 at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
Steve Birtles3ad09202008-02-09 04:49:55 +010059
Andrew Victore3ba22d2008-05-24 17:06:45 +010060 /* DBGU on ttyS0. (Rx & Tx only) */
61 at91_register_uart(0, 0, 0);
62
63 /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
64 at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
65 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
66 | ATMEL_UART_RI);
67
68 /* USART0 on ttyS2. (Rx & Tx only to JP3) */
69 at91_register_uart(AT91RM9200_ID_US0, 2, 0);
70
71 /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
72 at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
73
74 /* set serial console to ttyS0 (ie, DBGU) */
75 at91_set_serial_console(0);
Steve Birtles3ad09202008-02-09 04:49:55 +010076}
77
Andrew Victore3ba22d2008-05-24 17:06:45 +010078static void __init yl9200_init_irq(void)
Steve Birtles3ad09202008-02-09 04:49:55 +010079{
80 at91rm9200_init_interrupts(NULL);
81}
82
Steve Birtles3ad09202008-02-09 04:49:55 +010083
Steve Birtles3ad09202008-02-09 04:49:55 +010084/*
Andrew Victore3ba22d2008-05-24 17:06:45 +010085 * LEDs
86 */
87static struct gpio_led yl9200_leds[] = {
88 { /* D2 */
89 .name = "led2",
90 .gpio = AT91_PIN_PB17,
91 .active_low = 1,
92 .default_trigger = "timer",
93 },
94 { /* D3 */
95 .name = "led3",
96 .gpio = AT91_PIN_PB16,
97 .active_low = 1,
98 .default_trigger = "heartbeat",
99 },
100 { /* D4 */
101 .name = "led4",
102 .gpio = AT91_PIN_PB15,
103 .active_low = 1,
104 },
105 { /* D5 */
106 .name = "led5",
107 .gpio = AT91_PIN_PB8,
108 .active_low = 1,
109 }
110};
111
112/*
113 * Ethernet
114 */
115static struct at91_eth_data __initdata yl9200_eth_data = {
116 .phy_irq_pin = AT91_PIN_PB28,
117 .is_rmii = 1,
118};
119
120/*
121 * USB Host
122 */
123static struct at91_usbh_data __initdata yl9200_usbh_data = {
124 .ports = 1, /* PQFP version of AT91RM9200 */
125};
126
127/*
128 * USB Device
129 */
130static struct at91_udc_data __initdata yl9200_udc_data = {
131 .pullup_pin = AT91_PIN_PC4,
132 .vbus_pin = AT91_PIN_PC5,
133 .pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */
Steve Birtles3ad09202008-02-09 04:49:55 +0100134
135};
Andrew Victore3ba22d2008-05-24 17:06:45 +0100136
137/*
138 * MMC
139 */
140static struct at91_mmc_data __initdata yl9200_mmc_data = {
141 .det_pin = AT91_PIN_PB9,
142 // .wp_pin = ... not connected
Steve Birtles3ad09202008-02-09 04:49:55 +0100143 .wire4 = 1,
Steve Birtles3ad09202008-02-09 04:49:55 +0100144};
145
Andrew Victore3ba22d2008-05-24 17:06:45 +0100146/*
147 * NAND Flash
148 */
149static struct mtd_partition __initdata yl9200_nand_partition[] = {
Steve Birtles3ad09202008-02-09 04:49:55 +0100150 {
151 .name = "AT91 NAND partition 1, boot",
152 .offset = 0,
153 .size = 1 * SZ_256K
154 },
155 {
156 .name = "AT91 NAND partition 2, kernel",
157 .offset = 1 * SZ_256K,
158 .size = 2 * SZ_1M - 1 * SZ_256K
159 },
160 {
161 .name = "AT91 NAND partition 3, filesystem",
162 .offset = 2 * SZ_1M,
163 .size = 14 * SZ_1M
164 },
165 {
166 .name = "AT91 NAND partition 4, storage",
167 .offset = 16 * SZ_1M,
168 .size = 16 * SZ_1M
169 },
170 {
171 .name = "AT91 NAND partition 5, ext-fs",
172 .offset = 32 * SZ_1M,
173 .size = 32 * SZ_1M
Andrew Victore3ba22d2008-05-24 17:06:45 +0100174 }
Steve Birtles3ad09202008-02-09 04:49:55 +0100175};
176
177static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
178{
Andrew Victore3ba22d2008-05-24 17:06:45 +0100179 *num_partitions = ARRAY_SIZE(yl9200_nand_partition);
180 return yl9200_nand_partition;
Steve Birtles3ad09202008-02-09 04:49:55 +0100181}
182
David Woodhouseff877ea2008-07-25 10:40:14 -0400183static struct atmel_nand_data __initdata yl9200_nand_data = {
Andrew Victore3ba22d2008-05-24 17:06:45 +0100184 .ale = 6,
185 .cle = 7,
186 // .det_pin = ... not connected
187 .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
188 .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
Steve Birtles3ad09202008-02-09 04:49:55 +0100189 .partition_info = nand_partitions,
190};
191
Steve Birtles3ad09202008-02-09 04:49:55 +0100192/*
Andrew Victore3ba22d2008-05-24 17:06:45 +0100193 * NOR Flash
194 */
195#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
196#define YL9200_FLASH_SIZE 0x1000000
Steve Birtles3ad09202008-02-09 04:49:55 +0100197
Andrew Victore3ba22d2008-05-24 17:06:45 +0100198static struct mtd_partition yl9200_flash_partitions[] = {
Steve Birtles3ad09202008-02-09 04:49:55 +0100199 {
Andrew Victore3ba22d2008-05-24 17:06:45 +0100200 .name = "Bootloader",
201 .size = 0x00040000,
202 .offset = 0,
203 .mask_flags = MTD_WRITEABLE, /* force read-only */
204 },
205 {
206 .name = "Kernel",
207 .size = 0x001C0000,
208 .offset = 0x00040000,
209 },
210 {
211 .name = "Filesystem",
212 .size = MTDPART_SIZ_FULL,
213 .offset = 0x00200000
Steve Birtles3ad09202008-02-09 04:49:55 +0100214 }
215};
216
Andrew Victore3ba22d2008-05-24 17:06:45 +0100217static struct physmap_flash_data yl9200_flash_data = {
218 .width = 2,
219 .parts = yl9200_flash_partitions,
220 .nr_parts = ARRAY_SIZE(yl9200_flash_partitions),
221};
222
223static struct resource yl9200_flash_resources[] = {
224 {
225 .start = YL9200_FLASH_BASE,
226 .end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
227 .flags = IORESOURCE_MEM,
228 }
229};
230
231static struct platform_device yl9200_flash = {
Steve Birtles3ad09202008-02-09 04:49:55 +0100232 .name = "physmap-flash",
233 .id = 0,
234 .dev = {
Andrew Victore3ba22d2008-05-24 17:06:45 +0100235 .platform_data = &yl9200_flash_data,
Steve Birtles3ad09202008-02-09 04:49:55 +0100236 },
Andrew Victore3ba22d2008-05-24 17:06:45 +0100237 .resource = yl9200_flash_resources,
238 .num_resources = ARRAY_SIZE(yl9200_flash_resources),
Steve Birtles3ad09202008-02-09 04:49:55 +0100239};
240
Andrew Victore3ba22d2008-05-24 17:06:45 +0100241/*
242 * I2C (TWI)
Steve Birtles3ad09202008-02-09 04:49:55 +0100243 */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100244static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
245 { /* EEPROM */
246 I2C_BOARD_INFO("24c128", 0x50),
247 }
248};
249
250/*
251 * GPIO Buttons
252*/
Steve Birtles3ad09202008-02-09 04:49:55 +0100253#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
Andrew Victore3ba22d2008-05-24 17:06:45 +0100254static struct gpio_keys_button yl9200_buttons[] = {
Steve Birtles3ad09202008-02-09 04:49:55 +0100255 {
256 .gpio = AT91_PIN_PA24,
Andrew Victore3ba22d2008-05-24 17:06:45 +0100257 .code = BTN_2,
Steve Birtles3ad09202008-02-09 04:49:55 +0100258 .desc = "SW2",
259 .active_low = 1,
260 .wakeup = 1,
261 },
262 {
263 .gpio = AT91_PIN_PB1,
Andrew Victore3ba22d2008-05-24 17:06:45 +0100264 .code = BTN_3,
Steve Birtles3ad09202008-02-09 04:49:55 +0100265 .desc = "SW3",
266 .active_low = 1,
267 .wakeup = 1,
268 },
269 {
270 .gpio = AT91_PIN_PB2,
Andrew Victore3ba22d2008-05-24 17:06:45 +0100271 .code = BTN_4,
Steve Birtles3ad09202008-02-09 04:49:55 +0100272 .desc = "SW4",
273 .active_low = 1,
274 .wakeup = 1,
275 },
276 {
277 .gpio = AT91_PIN_PB6,
Andrew Victore3ba22d2008-05-24 17:06:45 +0100278 .code = BTN_5,
Steve Birtles3ad09202008-02-09 04:49:55 +0100279 .desc = "SW5",
280 .active_low = 1,
281 .wakeup = 1,
Andrew Victore3ba22d2008-05-24 17:06:45 +0100282 }
Steve Birtles3ad09202008-02-09 04:49:55 +0100283};
284
Andrew Victore3ba22d2008-05-24 17:06:45 +0100285static struct gpio_keys_platform_data yl9200_button_data = {
286 .buttons = yl9200_buttons,
287 .nbuttons = ARRAY_SIZE(yl9200_buttons),
Steve Birtles3ad09202008-02-09 04:49:55 +0100288};
289
Andrew Victore3ba22d2008-05-24 17:06:45 +0100290static struct platform_device yl9200_button_device = {
Steve Birtles3ad09202008-02-09 04:49:55 +0100291 .name = "gpio-keys",
292 .id = -1,
293 .num_resources = 0,
294 .dev = {
Andrew Victore3ba22d2008-05-24 17:06:45 +0100295 .platform_data = &yl9200_button_data,
Steve Birtles3ad09202008-02-09 04:49:55 +0100296 }
297};
298
Andrew Victore3ba22d2008-05-24 17:06:45 +0100299static void __init yl9200_add_device_buttons(void)
Steve Birtles3ad09202008-02-09 04:49:55 +0100300{
Andrew Victore3ba22d2008-05-24 17:06:45 +0100301 at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */
Steve Birtles3ad09202008-02-09 04:49:55 +0100302 at91_set_deglitch(AT91_PIN_PA24, 1);
Andrew Victore3ba22d2008-05-24 17:06:45 +0100303 at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */
Steve Birtles3ad09202008-02-09 04:49:55 +0100304 at91_set_deglitch(AT91_PIN_PB1, 1);
Andrew Victore3ba22d2008-05-24 17:06:45 +0100305 at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */
Steve Birtles3ad09202008-02-09 04:49:55 +0100306 at91_set_deglitch(AT91_PIN_PB2, 1);
Andrew Victore3ba22d2008-05-24 17:06:45 +0100307 at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */
Steve Birtles3ad09202008-02-09 04:49:55 +0100308 at91_set_deglitch(AT91_PIN_PB6, 1);
309
Andrew Victore3ba22d2008-05-24 17:06:45 +0100310 /* Enable buttons (Sheet 5) */
311 at91_set_gpio_output(AT91_PIN_PB7, 1);
Steve Birtles3ad09202008-02-09 04:49:55 +0100312
Andrew Victore3ba22d2008-05-24 17:06:45 +0100313 platform_device_register(&yl9200_button_device);
Steve Birtles3ad09202008-02-09 04:49:55 +0100314}
315#else
Andrew Victore3ba22d2008-05-24 17:06:45 +0100316static void __init yl9200_add_device_buttons(void) {}
Steve Birtles3ad09202008-02-09 04:49:55 +0100317#endif
318
Andrew Victore3ba22d2008-05-24 17:06:45 +0100319/*
320 * Touchscreen
321 */
322#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
323static int ads7843_pendown_state(void)
324{
325 return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */
326}
327
328static struct ads7846_platform_data ads_info = {
329 .model = 7843,
330 .x_min = 150,
331 .x_max = 3830,
332 .y_min = 190,
333 .y_max = 3830,
334 .vref_delay_usecs = 100,
335
336 /* For a 8" touch-screen */
337 // .x_plate_ohms = 603,
338 // .y_plate_ohms = 332,
339
340 /* For a 10.4" touch-screen */
341 // .x_plate_ohms = 611,
342 // .y_plate_ohms = 325,
343
344 .x_plate_ohms = 576,
345 .y_plate_ohms = 366,
346
347 .pressure_max = 15000, /* generally nonsense on the 7843 */
348 .debounce_max = 1,
349 .debounce_rep = 0,
350 .debounce_tol = (~0),
351 .get_pendown_state = ads7843_pendown_state,
352};
353
354static void __init yl9200_add_device_ts(void)
355{
356 at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */
357 at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */
358}
359#else
360static void __init yl9200_add_device_ts(void) {}
361#endif
362
363/*
364 * SPI devices
365 */
366static struct spi_board_info yl9200_spi_devices[] = {
367#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
368 { /* Touchscreen */
369 .modalias = "ads7846",
370 .chip_select = 0,
371 .max_speed_hz = 5000 * 26,
372 .platform_data = &ads_info,
373 .irq = AT91_PIN_PB11,
374 },
375#endif
376 { /* CAN */
377 .modalias = "mcp2510",
378 .chip_select = 1,
379 .max_speed_hz = 25000 * 26,
380 .irq = AT91_PIN_PC0,
381 }
382};
383
384/*
385 * LCD / VGA
386 *
387 * EPSON S1D13806 FB (discontinued chip)
388 * EPSON S1D13506 FB
389 */
Steve Birtles3ad09202008-02-09 04:49:55 +0100390#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
391#include <video/s1d13xxxfb.h>
392
Steve Birtles3ad09202008-02-09 04:49:55 +0100393#define AT91_FB_REG_BASE 0x80000000L
394#define AT91_FB_REG_SIZE 0x200
395#define AT91_FB_VMEM_BASE 0x80200000L
396#define AT91_FB_VMEM_SIZE 0x200000L
397
Andrew Victore3ba22d2008-05-24 17:06:45 +0100398static void __init yl9200_init_video(void)
Steve Birtles3ad09202008-02-09 04:49:55 +0100399{
Andrew Victore3ba22d2008-05-24 17:06:45 +0100400 /* NWAIT Signal */
401 at91_set_A_periph(AT91_PIN_PC6, 0);
Steve Birtles3ad09202008-02-09 04:49:55 +0100402
Andrew Victore3ba22d2008-05-24 17:06:45 +0100403 /* Initialization of the Static Memory Controller for Chip Select 2 */
404 at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
405 | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */
406 | AT91_SMC_TDF_(0x100) /* float time */
Steve Birtles3ad09202008-02-09 04:49:55 +0100407 );
Steve Birtles3ad09202008-02-09 04:49:55 +0100408}
409
Andrew Victore3ba22d2008-05-24 17:06:45 +0100410static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
Steve Birtles3ad09202008-02-09 04:49:55 +0100411{
Andrew Victore3ba22d2008-05-24 17:06:45 +0100412 {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/
413 {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
414 {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/
415 {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/
416 {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/
417 {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/
418 {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/
419 {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/
420 {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/
421 {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/
422 {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/
423 {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/
424 {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/
425 {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/
426 {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/
427 {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/
428 {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/
429 {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/
430 {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/
431 {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/
432 {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/
433 {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/
434 {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/
435 {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/
436 {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/
437 {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/
438 {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/
439 {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/
440 {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/
441 {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/
442 {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/
443 {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/
444 {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/
445 {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/
446 {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/
447 {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/
448 {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/
449 {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/
450 {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/
451 {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/
452 {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/
453 {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/
454 {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/
455 {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */
456 {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/
457 {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/
458 {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/
459 {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/
460 {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/
461 {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/
462 {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/
463 {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/
464 {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/
465 {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/
466 {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/
467 {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/
468 {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/
469 {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/
470 {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/
471 {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/
472 {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/
473 {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/
474 {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/
475 {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/
476 {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/
477 {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/
478 {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/
479 {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/
480 {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/
481 {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/
482 {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/
483 {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/
484 {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/
485 {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/
486 {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/
487 {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/
488 {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/
489 {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/
490 {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/
491 {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/
492 {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/
493 {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/
494 {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/
495 {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/
496 {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/
497 {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/
498 {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/
499 {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/
500 {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/
501 {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/
502 {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/
503 {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/
504 {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/
505 {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/
506 {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/
507 {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/
508 {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/
509 {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/
510 {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/
511 {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/
512 {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/
513 {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/
514 {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/
515 {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/
516 {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
Steve Birtles3ad09202008-02-09 04:49:55 +0100517};
518
Andrew Victore3ba22d2008-05-24 17:06:45 +0100519static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
Steve Birtles3ad09202008-02-09 04:49:55 +0100520
Andrew Victore3ba22d2008-05-24 17:06:45 +0100521static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
522 .initregs = yl9200_s1dfb_initregs,
523 .initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
524 .platform_init_video = yl9200_init_video,
Steve Birtles3ad09202008-02-09 04:49:55 +0100525};
526
Andrew Victore3ba22d2008-05-24 17:06:45 +0100527static struct resource yl9200_s1dfb_resource[] = {
Steve Birtles3ad09202008-02-09 04:49:55 +0100528 [0] = { /* video mem */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100529 .name = "s1d13xxxfb memory",
530 .start = AT91_FB_VMEM_BASE,
531 .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
532 .flags = IORESOURCE_MEM,
Steve Birtles3ad09202008-02-09 04:49:55 +0100533 },
534 [1] = { /* video registers */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100535 .name = "s1d13xxxfb registers",
536 .start = AT91_FB_REG_BASE,
537 .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
538 .flags = IORESOURCE_MEM,
Steve Birtles3ad09202008-02-09 04:49:55 +0100539 },
540};
541
Andrew Victore3ba22d2008-05-24 17:06:45 +0100542static struct platform_device yl9200_s1dfb_device = {
543 .name = "s1d13806fb",
544 .id = -1,
545 .dev = {
Steve Birtles3ad09202008-02-09 04:49:55 +0100546 .dma_mask = &s1dfb_dmamask,
Andrew Victore3ba22d2008-05-24 17:06:45 +0100547 .coherent_dma_mask = DMA_BIT_MASK(32),
548 .platform_data = &yl9200_s1dfb_pdata,
Steve Birtles3ad09202008-02-09 04:49:55 +0100549 },
Andrew Victore3ba22d2008-05-24 17:06:45 +0100550 .resource = yl9200_s1dfb_resource,
551 .num_resources = ARRAY_SIZE(yl9200_s1dfb_resource),
Steve Birtles3ad09202008-02-09 04:49:55 +0100552};
553
Andrew Victore3ba22d2008-05-24 17:06:45 +0100554void __init yl9200_add_device_video(void)
Steve Birtles3ad09202008-02-09 04:49:55 +0100555{
Andrew Victore3ba22d2008-05-24 17:06:45 +0100556 platform_device_register(&yl9200_s1dfb_device);
Steve Birtles3ad09202008-02-09 04:49:55 +0100557}
558#else
Andrew Victore3ba22d2008-05-24 17:06:45 +0100559void __init yl9200_add_device_video(void) {}
Steve Birtles3ad09202008-02-09 04:49:55 +0100560#endif
561
Andrew Victore3ba22d2008-05-24 17:06:45 +0100562
563static void __init yl9200_board_init(void)
Steve Birtles3ad09202008-02-09 04:49:55 +0100564{
565 /* Serial */
566 at91_add_device_serial();
567 /* Ethernet */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100568 at91_add_device_eth(&yl9200_eth_data);
Steve Birtles3ad09202008-02-09 04:49:55 +0100569 /* USB Host */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100570 at91_add_device_usbh(&yl9200_usbh_data);
Steve Birtles3ad09202008-02-09 04:49:55 +0100571 /* USB Device */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100572 at91_add_device_udc(&yl9200_udc_data);
Steve Birtles3ad09202008-02-09 04:49:55 +0100573 /* I2C */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100574 at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
575 /* MMC */
576 at91_add_device_mmc(0, &yl9200_mmc_data);
Steve Birtles3ad09202008-02-09 04:49:55 +0100577 /* NAND */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100578 at91_add_device_nand(&yl9200_nand_data);
Steve Birtles3ad09202008-02-09 04:49:55 +0100579 /* NOR Flash */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100580 platform_device_register(&yl9200_flash);
581#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
582 /* SPI */
583 at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
584 /* Touchscreen */
585 yl9200_add_device_ts();
586#endif
587 /* LEDs. */
588 at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
Steve Birtles3ad09202008-02-09 04:49:55 +0100589 /* Push Buttons */
Andrew Victore3ba22d2008-05-24 17:06:45 +0100590 yl9200_add_device_buttons();
591 /* VGA */
592 yl9200_add_device_video();
Steve Birtles3ad09202008-02-09 04:49:55 +0100593}
594
595MACHINE_START(YL9200, "uCdragon YL-9200")
Andrew Victore3ba22d2008-05-24 17:06:45 +0100596 /* Maintainer: S.Birtles */
597 .phys_io = AT91_BASE_SYS,
Steve Birtles3ad09202008-02-09 04:49:55 +0100598 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
599 .boot_params = AT91_SDRAM_BASE + 0x100,
Andrew Victore3ba22d2008-05-24 17:06:45 +0100600 .timer = &at91rm9200_timer,
601 .map_io = yl9200_map_io,
602 .init_irq = yl9200_init_irq,
603 .init_machine = yl9200_board_init,
Steve Birtles3ad09202008-02-09 04:49:55 +0100604MACHINE_END