blob: 93462926b9d5e0d208066a0a20d4926e38cf2248 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 *
3 * BRIEF MODULE DESCRIPTION
4 * IT8172 IDE controller support
5 *
6 * Copyright 2000 MontaVista Software Inc.
7 * Author: MontaVista Software, Inc.
8 * stevel@mvista.com or source@mvista.com
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
17 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
18 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
21 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
22 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 *
26 * You should have received a copy of the GNU General Public License along
27 * with this program; if not, write to the Free Software Foundation, Inc.,
28 * 675 Mass Ave, Cambridge, MA 02139, USA.
29 */
30
31#include <linux/config.h>
32#include <linux/module.h>
33#include <linux/types.h>
34#include <linux/kernel.h>
35#include <linux/ioport.h>
36#include <linux/pci.h>
37#include <linux/hdreg.h>
38#include <linux/ide.h>
39#include <linux/delay.h>
40#include <linux/init.h>
41
42#include <asm/io.h>
43#include <asm/it8172/it8172_int.h>
44
45/*
46 * Prototypes
47 */
48static u8 it8172_ratemask (ide_drive_t *drive)
49{
50 return 1;
51}
52
53static void it8172_tune_drive (ide_drive_t *drive, u8 pio)
54{
55 ide_hwif_t *hwif = HWIF(drive);
56 struct pci_dev *dev = hwif->pci_dev;
57 int is_slave = (&hwif->drives[1] == drive);
58 unsigned long flags;
59 u16 drive_enables;
60 u32 drive_timing;
61
62 pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
63 spin_lock_irqsave(&ide_lock, flags);
64 pci_read_config_word(dev, 0x40, &drive_enables);
65 pci_read_config_dword(dev, 0x44, &drive_timing);
66
67 /*
68 * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
69 * are being left at the default values of 8 PCI clocks (242 nsec
70 * for a 33 MHz clock). These can be safely shortened at higher
71 * PIO modes. The DIOR/DIOW pulse width and recovery times only
72 * apply to PIO modes, not to the DMA modes.
73 */
74
75 /*
76 * Enable port 0x44. The IT8172G spec is confused; it calls
77 * this register the "Slave IDE Timing Register", but in fact,
78 * it controls timing for both master and slave drives.
79 */
80 drive_enables |= 0x4000;
81
82 if (is_slave) {
83 drive_enables &= 0xc006;
84 if (pio > 1)
85 /* enable prefetch and IORDY sample-point */
86 drive_enables |= 0x0060;
87 } else {
88 drive_enables &= 0xc060;
89 if (pio > 1)
90 /* enable prefetch and IORDY sample-point */
91 drive_enables |= 0x0006;
92 }
93
94 pci_write_config_word(dev, 0x40, drive_enables);
95 spin_unlock_irqrestore(&ide_lock, flags);
96}
97
98static u8 it8172_dma_2_pio (u8 xfer_rate)
99{
100 switch(xfer_rate) {
101 case XFER_UDMA_5:
102 case XFER_UDMA_4:
103 case XFER_UDMA_3:
104 case XFER_UDMA_2:
105 case XFER_UDMA_1:
106 case XFER_UDMA_0:
107 case XFER_MW_DMA_2:
108 case XFER_PIO_4:
109 return 4;
110 case XFER_MW_DMA_1:
111 case XFER_PIO_3:
112 return 3;
113 case XFER_SW_DMA_2:
114 case XFER_PIO_2:
115 return 2;
116 case XFER_MW_DMA_0:
117 case XFER_SW_DMA_1:
118 case XFER_SW_DMA_0:
119 case XFER_PIO_1:
120 case XFER_PIO_0:
121 case XFER_PIO_SLOW:
122 default:
123 return 0;
124 }
125}
126
127static int it8172_tune_chipset (ide_drive_t *drive, u8 xferspeed)
128{
129 ide_hwif_t *hwif = HWIF(drive);
130 struct pci_dev *dev = hwif->pci_dev;
131 u8 speed = ide_rate_filter(it8172_ratemask(drive), xferspeed);
132 int a_speed = 3 << (drive->dn * 4);
133 int u_flag = 1 << drive->dn;
134 int u_speed = 0;
135 u8 reg48, reg4a;
136
137 pci_read_config_byte(dev, 0x48, &reg48);
138 pci_read_config_byte(dev, 0x4a, &reg4a);
139
140 /*
141 * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
142 * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
143 * transfers on some drives, even though both numbers meet the minimum
144 * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
145 * So the faster times are just commented out here. The good news is
146 * that the slower cycle time has very little affect on transfer
147 * performance.
148 */
149
150 switch(speed) {
151 case XFER_UDMA_4:
152 case XFER_UDMA_2: //u_speed = 2 << (drive->dn * 4); break;
153 case XFER_UDMA_5:
154 case XFER_UDMA_3:
155 case XFER_UDMA_1: //u_speed = 1 << (drive->dn * 4); break;
156 case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
157 case XFER_MW_DMA_2:
158 case XFER_MW_DMA_1:
159 case XFER_MW_DMA_0:
160 case XFER_SW_DMA_2: break;
161 case XFER_PIO_4:
162 case XFER_PIO_3:
163 case XFER_PIO_2:
164 case XFER_PIO_0: break;
165 default: return -1;
166 }
167
168 if (speed >= XFER_UDMA_0) {
169 pci_write_config_byte(dev, 0x48, reg48 | u_flag);
170 reg4a &= ~a_speed;
171 pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
172 } else {
173 pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
174 pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
175 }
176
177 it8172_tune_drive(drive, it8172_dma_2_pio(speed));
178 return (ide_config_drive_speed(drive, speed));
179}
180
181static int it8172_config_chipset_for_dma (ide_drive_t *drive)
182{
183 u8 speed = ide_dma_speed(drive, it8172_ratemask(drive));
184
185 if (!(speed)) {
186 u8 tspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
187 speed = it8172_dma_2_pio(XFER_PIO_0 + tspeed);
188 }
189
190 (void) it8172_tune_chipset(drive, speed);
191 return ide_dma_enable(drive);
192}
193
194static int it8172_config_drive_xfer_rate (ide_drive_t *drive)
195{
196 ide_hwif_t *hwif = HWIF(drive);
197 struct hd_driveid *id = drive->id;
198
199 drive->init_speed = 0;
200
201 if (id && (id->capability & 1) && drive->autodma) {
202
203 if (ide_use_dma(drive)) {
204 if (it8172_config_chipset_for_dma(drive))
205 return hwif->ide_dma_on(drive);
206 }
207
208 goto fast_ata_pio;
209
210 } else if ((id->capability & 8) || (id->field_valid & 2)) {
211fast_ata_pio:
212 it8172_tune_drive(drive, 5);
213 return hwif->ide_dma_off_quietly(drive);
214 }
215 /* IORDY not supported */
216 return 0;
217}
218
Herbert Xua380a882005-07-03 16:28:44 +0200219static unsigned int __devinit init_chipset_it8172 (struct pci_dev *dev, const char *name)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700220{
221 unsigned char progif;
222
223 /*
224 * Place both IDE interfaces into PCI "native" mode
225 */
226 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
227 pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05);
228
229 return IT8172_IDE_IRQ;
230}
231
232
Herbert Xua380a882005-07-03 16:28:44 +0200233static void __devinit init_hwif_it8172 (ide_hwif_t *hwif)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234{
235 struct pci_dev* dev = hwif->pci_dev;
236 unsigned long cmdBase, ctrlBase;
237
238 hwif->autodma = 0;
239 hwif->tuneproc = &it8172_tune_drive;
240 hwif->speedproc = &it8172_tune_chipset;
241
242 cmdBase = dev->resource[0].start;
243 ctrlBase = dev->resource[1].start;
244
245 ide_init_hwif_ports(&hwif->hw, cmdBase, ctrlBase | 2, NULL);
246 memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
247 hwif->noprobe = 0;
248
249 if (!hwif->dma_base) {
250 hwif->drives[0].autotune = 1;
251 hwif->drives[1].autotune = 1;
252 return;
253 }
254
255 hwif->atapi_dma = 1;
256 hwif->ultra_mask = 0x07;
257 hwif->mwdma_mask = 0x06;
258 hwif->swdma_mask = 0x04;
259
260 hwif->ide_dma_check = &it8172_config_drive_xfer_rate;
261 if (!noautodma)
262 hwif->autodma = 1;
263 hwif->drives[0].autodma = hwif->autodma;
264 hwif->drives[1].autodma = hwif->autodma;
265}
266
267static ide_pci_device_t it8172_chipsets[] __devinitdata = {
268 { /* 0 */
269 .name = "IT8172G",
270 .init_chipset = init_chipset_it8172,
271 .init_hwif = init_hwif_it8172,
272 .channels = 2,
273 .autodma = AUTODMA,
274 .enablebits = {{0x00,0x00,0x00}, {0x40,0x00,0x01}},
275 .bootable = ON_BOARD,
276 }
277};
278
279static int __devinit it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
280{
281 if ((!(PCI_FUNC(dev->devfn) & 1) ||
282 (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
283 return -ENODEV; /* IT8172 is more than an IDE controller */
284 return ide_setup_pci_device(dev, &it8172_chipsets[id->driver_data]);
285}
286
287static struct pci_device_id it8172_pci_tbl[] = {
288 { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
289 { 0, },
290};
291MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);
292
293static struct pci_driver driver = {
294 .name = "IT8172_IDE",
295 .id_table = it8172_pci_tbl,
296 .probe = it8172_init_one,
297};
298
299static int it8172_ide_init(void)
300{
301 return ide_pci_register_driver(&driver);
302}
303
304module_init(it8172_ide_init);
305
306MODULE_AUTHOR("SteveL@mvista.com");
307MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
308MODULE_LICENSE("GPL");