| Rafał Miłecki | 8369ae3 | 2011-05-09 18:56:46 +0200 | [diff] [blame] | 1 | #ifndef LINUX_BCMA_REGS_H_ |
| 2 | #define LINUX_BCMA_REGS_H_ |
| 3 | |
| 4 | /* Agent registers (common for every core) */ |
| 5 | #define BCMA_IOCTL 0x0408 |
| 6 | #define BCMA_IOCTL_CLK 0x0001 |
| 7 | #define BCMA_IOCTL_FGC 0x0002 |
| 8 | #define BCMA_IOCTL_CORE_BITS 0x3FFC |
| 9 | #define BCMA_IOCTL_PME_EN 0x4000 |
| 10 | #define BCMA_IOCTL_BIST_EN 0x8000 |
| 11 | #define BCMA_RESET_CTL 0x0800 |
| 12 | #define BCMA_RESET_CTL_RESET 0x0001 |
| 13 | |
| 14 | /* BCMA PCI config space registers. */ |
| 15 | #define BCMA_PCI_PMCSR 0x44 |
| 16 | #define BCMA_PCI_PE 0x100 |
| 17 | #define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */ |
| 18 | #define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */ |
| 19 | #define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */ |
| 20 | #define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */ |
| 21 | #define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */ |
| 22 | #define BCMA_PCI_IRQS 0x90 /* PCI interrupts */ |
| 23 | #define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */ |
| 24 | #define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */ |
| 25 | #define BCMA_PCI_BAR0_WIN2 0xAC |
| 26 | #define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */ |
| 27 | #define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */ |
| 28 | #define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */ |
| 29 | #define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ |
| 30 | #define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ |
| 31 | #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ |
| 32 | #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ |
| 33 | |
| 34 | #endif /* LINUX_BCMA_REGS_H_ */ |