Thomas Chou | ce79258 | 2011-02-14 10:20:39 +0800 | [diff] [blame] | 1 | /* |
| 2 | * OpenCores tiny SPI master driver |
| 3 | * |
| 4 | * http://opencores.org/project,tiny_spi |
| 5 | * |
| 6 | * Copyright (C) 2011 Thomas Chou <thomas@wytron.com.tw> |
| 7 | * |
| 8 | * Based on spi_s3c24xx.c, which is: |
| 9 | * Copyright (c) 2006 Ben Dooks |
| 10 | * Copyright (c) 2006 Simtec Electronics |
| 11 | * Ben Dooks <ben@simtec.co.uk> |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify |
| 14 | * it under the terms of the GNU General Public License version 2 as |
| 15 | * published by the Free Software Foundation. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/init.h> |
| 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/errno.h> |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/spi/spi.h> |
| 23 | #include <linux/spi/spi_bitbang.h> |
| 24 | #include <linux/spi/spi_oc_tiny.h> |
| 25 | #include <linux/io.h> |
| 26 | #include <linux/gpio.h> |
| 27 | #include <linux/of.h> |
| 28 | |
| 29 | #define DRV_NAME "spi_oc_tiny" |
| 30 | |
| 31 | #define TINY_SPI_RXDATA 0 |
| 32 | #define TINY_SPI_TXDATA 4 |
| 33 | #define TINY_SPI_STATUS 8 |
| 34 | #define TINY_SPI_CONTROL 12 |
| 35 | #define TINY_SPI_BAUD 16 |
| 36 | |
| 37 | #define TINY_SPI_STATUS_TXE 0x1 |
| 38 | #define TINY_SPI_STATUS_TXR 0x2 |
| 39 | |
| 40 | struct tiny_spi { |
| 41 | /* bitbang has to be first */ |
| 42 | struct spi_bitbang bitbang; |
| 43 | struct completion done; |
| 44 | |
| 45 | void __iomem *base; |
| 46 | int irq; |
| 47 | unsigned int freq; |
| 48 | unsigned int baudwidth; |
| 49 | unsigned int baud; |
| 50 | unsigned int speed_hz; |
| 51 | unsigned int mode; |
| 52 | unsigned int len; |
| 53 | unsigned int txc, rxc; |
| 54 | const u8 *txp; |
| 55 | u8 *rxp; |
| 56 | unsigned int gpio_cs_count; |
| 57 | int *gpio_cs; |
| 58 | }; |
| 59 | |
| 60 | static inline struct tiny_spi *tiny_spi_to_hw(struct spi_device *sdev) |
| 61 | { |
| 62 | return spi_master_get_devdata(sdev->master); |
| 63 | } |
| 64 | |
| 65 | static unsigned int tiny_spi_baud(struct spi_device *spi, unsigned int hz) |
| 66 | { |
| 67 | struct tiny_spi *hw = tiny_spi_to_hw(spi); |
| 68 | |
| 69 | return min(DIV_ROUND_UP(hw->freq, hz * 2), (1U << hw->baudwidth)) - 1; |
| 70 | } |
| 71 | |
| 72 | static void tiny_spi_chipselect(struct spi_device *spi, int is_active) |
| 73 | { |
| 74 | struct tiny_spi *hw = tiny_spi_to_hw(spi); |
| 75 | |
| 76 | if (hw->gpio_cs_count) { |
| 77 | gpio_set_value(hw->gpio_cs[spi->chip_select], |
| 78 | (spi->mode & SPI_CS_HIGH) ? is_active : !is_active); |
| 79 | } |
| 80 | } |
| 81 | |
| 82 | static int tiny_spi_setup_transfer(struct spi_device *spi, |
| 83 | struct spi_transfer *t) |
| 84 | { |
| 85 | struct tiny_spi *hw = tiny_spi_to_hw(spi); |
| 86 | unsigned int baud = hw->baud; |
| 87 | |
| 88 | if (t) { |
| 89 | if (t->speed_hz && t->speed_hz != hw->speed_hz) |
| 90 | baud = tiny_spi_baud(spi, t->speed_hz); |
| 91 | } |
| 92 | writel(baud, hw->base + TINY_SPI_BAUD); |
| 93 | writel(hw->mode, hw->base + TINY_SPI_CONTROL); |
| 94 | return 0; |
| 95 | } |
| 96 | |
| 97 | static int tiny_spi_setup(struct spi_device *spi) |
| 98 | { |
| 99 | struct tiny_spi *hw = tiny_spi_to_hw(spi); |
| 100 | |
| 101 | if (spi->max_speed_hz != hw->speed_hz) { |
| 102 | hw->speed_hz = spi->max_speed_hz; |
| 103 | hw->baud = tiny_spi_baud(spi, hw->speed_hz); |
| 104 | } |
| 105 | hw->mode = spi->mode & (SPI_CPOL | SPI_CPHA); |
| 106 | return 0; |
| 107 | } |
| 108 | |
| 109 | static inline void tiny_spi_wait_txr(struct tiny_spi *hw) |
| 110 | { |
| 111 | while (!(readb(hw->base + TINY_SPI_STATUS) & |
| 112 | TINY_SPI_STATUS_TXR)) |
| 113 | cpu_relax(); |
| 114 | } |
| 115 | |
| 116 | static inline void tiny_spi_wait_txe(struct tiny_spi *hw) |
| 117 | { |
| 118 | while (!(readb(hw->base + TINY_SPI_STATUS) & |
| 119 | TINY_SPI_STATUS_TXE)) |
| 120 | cpu_relax(); |
| 121 | } |
| 122 | |
| 123 | static int tiny_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) |
| 124 | { |
| 125 | struct tiny_spi *hw = tiny_spi_to_hw(spi); |
| 126 | const u8 *txp = t->tx_buf; |
| 127 | u8 *rxp = t->rx_buf; |
| 128 | unsigned int i; |
| 129 | |
| 130 | if (hw->irq >= 0) { |
| 131 | /* use intrrupt driven data transfer */ |
| 132 | hw->len = t->len; |
| 133 | hw->txp = t->tx_buf; |
| 134 | hw->rxp = t->rx_buf; |
| 135 | hw->txc = 0; |
| 136 | hw->rxc = 0; |
| 137 | |
| 138 | /* send the first byte */ |
| 139 | if (t->len > 1) { |
| 140 | writeb(hw->txp ? *hw->txp++ : 0, |
| 141 | hw->base + TINY_SPI_TXDATA); |
| 142 | hw->txc++; |
| 143 | writeb(hw->txp ? *hw->txp++ : 0, |
| 144 | hw->base + TINY_SPI_TXDATA); |
| 145 | hw->txc++; |
| 146 | writeb(TINY_SPI_STATUS_TXR, hw->base + TINY_SPI_STATUS); |
| 147 | } else { |
| 148 | writeb(hw->txp ? *hw->txp++ : 0, |
| 149 | hw->base + TINY_SPI_TXDATA); |
| 150 | hw->txc++; |
| 151 | writeb(TINY_SPI_STATUS_TXE, hw->base + TINY_SPI_STATUS); |
| 152 | } |
| 153 | |
| 154 | wait_for_completion(&hw->done); |
| 155 | } else if (txp && rxp) { |
| 156 | /* we need to tighten the transfer loop */ |
| 157 | writeb(*txp++, hw->base + TINY_SPI_TXDATA); |
| 158 | if (t->len > 1) { |
| 159 | writeb(*txp++, hw->base + TINY_SPI_TXDATA); |
| 160 | for (i = 2; i < t->len; i++) { |
| 161 | u8 rx, tx = *txp++; |
| 162 | tiny_spi_wait_txr(hw); |
| 163 | rx = readb(hw->base + TINY_SPI_TXDATA); |
| 164 | writeb(tx, hw->base + TINY_SPI_TXDATA); |
| 165 | *rxp++ = rx; |
| 166 | } |
| 167 | tiny_spi_wait_txr(hw); |
| 168 | *rxp++ = readb(hw->base + TINY_SPI_TXDATA); |
| 169 | } |
| 170 | tiny_spi_wait_txe(hw); |
| 171 | *rxp++ = readb(hw->base + TINY_SPI_RXDATA); |
| 172 | } else if (rxp) { |
| 173 | writeb(0, hw->base + TINY_SPI_TXDATA); |
| 174 | if (t->len > 1) { |
| 175 | writeb(0, |
| 176 | hw->base + TINY_SPI_TXDATA); |
| 177 | for (i = 2; i < t->len; i++) { |
| 178 | u8 rx; |
| 179 | tiny_spi_wait_txr(hw); |
| 180 | rx = readb(hw->base + TINY_SPI_TXDATA); |
| 181 | writeb(0, hw->base + TINY_SPI_TXDATA); |
| 182 | *rxp++ = rx; |
| 183 | } |
| 184 | tiny_spi_wait_txr(hw); |
| 185 | *rxp++ = readb(hw->base + TINY_SPI_TXDATA); |
| 186 | } |
| 187 | tiny_spi_wait_txe(hw); |
| 188 | *rxp++ = readb(hw->base + TINY_SPI_RXDATA); |
| 189 | } else if (txp) { |
| 190 | writeb(*txp++, hw->base + TINY_SPI_TXDATA); |
| 191 | if (t->len > 1) { |
| 192 | writeb(*txp++, hw->base + TINY_SPI_TXDATA); |
| 193 | for (i = 2; i < t->len; i++) { |
| 194 | u8 tx = *txp++; |
| 195 | tiny_spi_wait_txr(hw); |
| 196 | writeb(tx, hw->base + TINY_SPI_TXDATA); |
| 197 | } |
| 198 | } |
| 199 | tiny_spi_wait_txe(hw); |
| 200 | } else { |
| 201 | writeb(0, hw->base + TINY_SPI_TXDATA); |
| 202 | if (t->len > 1) { |
| 203 | writeb(0, hw->base + TINY_SPI_TXDATA); |
| 204 | for (i = 2; i < t->len; i++) { |
| 205 | tiny_spi_wait_txr(hw); |
| 206 | writeb(0, hw->base + TINY_SPI_TXDATA); |
| 207 | } |
| 208 | } |
| 209 | tiny_spi_wait_txe(hw); |
| 210 | } |
| 211 | return t->len; |
| 212 | } |
| 213 | |
| 214 | static irqreturn_t tiny_spi_irq(int irq, void *dev) |
| 215 | { |
| 216 | struct tiny_spi *hw = dev; |
| 217 | |
| 218 | writeb(0, hw->base + TINY_SPI_STATUS); |
| 219 | if (hw->rxc + 1 == hw->len) { |
| 220 | if (hw->rxp) |
| 221 | *hw->rxp++ = readb(hw->base + TINY_SPI_RXDATA); |
| 222 | hw->rxc++; |
| 223 | complete(&hw->done); |
| 224 | } else { |
| 225 | if (hw->rxp) |
| 226 | *hw->rxp++ = readb(hw->base + TINY_SPI_TXDATA); |
| 227 | hw->rxc++; |
| 228 | if (hw->txc < hw->len) { |
| 229 | writeb(hw->txp ? *hw->txp++ : 0, |
| 230 | hw->base + TINY_SPI_TXDATA); |
| 231 | hw->txc++; |
| 232 | writeb(TINY_SPI_STATUS_TXR, |
| 233 | hw->base + TINY_SPI_STATUS); |
| 234 | } else { |
| 235 | writeb(TINY_SPI_STATUS_TXE, |
| 236 | hw->base + TINY_SPI_STATUS); |
| 237 | } |
| 238 | } |
| 239 | return IRQ_HANDLED; |
| 240 | } |
| 241 | |
| 242 | #ifdef CONFIG_OF |
| 243 | #include <linux/of_gpio.h> |
| 244 | |
| 245 | static int __devinit tiny_spi_of_probe(struct platform_device *pdev) |
| 246 | { |
| 247 | struct tiny_spi *hw = platform_get_drvdata(pdev); |
| 248 | struct device_node *np = pdev->dev.of_node; |
| 249 | unsigned int i; |
| 250 | const __be32 *val; |
| 251 | int len; |
| 252 | |
| 253 | if (!np) |
| 254 | return 0; |
| 255 | hw->gpio_cs_count = of_gpio_count(np); |
| 256 | if (hw->gpio_cs_count) { |
| 257 | hw->gpio_cs = devm_kzalloc(&pdev->dev, |
| 258 | hw->gpio_cs_count * sizeof(unsigned int), |
| 259 | GFP_KERNEL); |
| 260 | if (!hw->gpio_cs) |
| 261 | return -ENOMEM; |
| 262 | } |
| 263 | for (i = 0; i < hw->gpio_cs_count; i++) { |
| 264 | hw->gpio_cs[i] = of_get_gpio_flags(np, i, NULL); |
| 265 | if (hw->gpio_cs[i] < 0) |
| 266 | return -ENODEV; |
| 267 | } |
| 268 | hw->bitbang.master->dev.of_node = pdev->dev.of_node; |
| 269 | val = of_get_property(pdev->dev.of_node, |
| 270 | "clock-frequency", &len); |
| 271 | if (val && len >= sizeof(__be32)) |
| 272 | hw->freq = be32_to_cpup(val); |
| 273 | val = of_get_property(pdev->dev.of_node, "baud-width", &len); |
| 274 | if (val && len >= sizeof(__be32)) |
| 275 | hw->baudwidth = be32_to_cpup(val); |
| 276 | return 0; |
| 277 | } |
| 278 | #else /* !CONFIG_OF */ |
| 279 | static int __devinit tiny_spi_of_probe(struct platform_device *pdev) |
| 280 | { |
| 281 | return 0; |
| 282 | } |
| 283 | #endif /* CONFIG_OF */ |
| 284 | |
| 285 | static int __devinit tiny_spi_probe(struct platform_device *pdev) |
| 286 | { |
| 287 | struct tiny_spi_platform_data *platp = pdev->dev.platform_data; |
| 288 | struct tiny_spi *hw; |
| 289 | struct spi_master *master; |
| 290 | struct resource *res; |
| 291 | unsigned int i; |
| 292 | int err = -ENODEV; |
| 293 | |
| 294 | master = spi_alloc_master(&pdev->dev, sizeof(struct tiny_spi)); |
| 295 | if (!master) |
| 296 | return err; |
| 297 | |
| 298 | /* setup the master state. */ |
| 299 | master->bus_num = pdev->id; |
| 300 | master->num_chipselect = 255; |
| 301 | master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; |
| 302 | master->setup = tiny_spi_setup; |
| 303 | |
| 304 | hw = spi_master_get_devdata(master); |
| 305 | platform_set_drvdata(pdev, hw); |
| 306 | |
| 307 | /* setup the state for the bitbang driver */ |
| 308 | hw->bitbang.master = spi_master_get(master); |
| 309 | if (!hw->bitbang.master) |
| 310 | return err; |
| 311 | hw->bitbang.setup_transfer = tiny_spi_setup_transfer; |
| 312 | hw->bitbang.chipselect = tiny_spi_chipselect; |
| 313 | hw->bitbang.txrx_bufs = tiny_spi_txrx_bufs; |
| 314 | |
| 315 | /* find and map our resources */ |
| 316 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 317 | if (!res) |
| 318 | goto exit_busy; |
| 319 | if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), |
| 320 | pdev->name)) |
| 321 | goto exit_busy; |
| 322 | hw->base = devm_ioremap_nocache(&pdev->dev, res->start, |
| 323 | resource_size(res)); |
| 324 | if (!hw->base) |
| 325 | goto exit_busy; |
| 326 | /* irq is optional */ |
| 327 | hw->irq = platform_get_irq(pdev, 0); |
| 328 | if (hw->irq >= 0) { |
| 329 | init_completion(&hw->done); |
| 330 | err = devm_request_irq(&pdev->dev, hw->irq, tiny_spi_irq, 0, |
| 331 | pdev->name, hw); |
| 332 | if (err) |
| 333 | goto exit; |
| 334 | } |
| 335 | /* find platform data */ |
| 336 | if (platp) { |
| 337 | hw->gpio_cs_count = platp->gpio_cs_count; |
| 338 | hw->gpio_cs = platp->gpio_cs; |
| 339 | if (platp->gpio_cs_count && !platp->gpio_cs) |
| 340 | goto exit_busy; |
| 341 | hw->freq = platp->freq; |
| 342 | hw->baudwidth = platp->baudwidth; |
| 343 | } else { |
| 344 | err = tiny_spi_of_probe(pdev); |
| 345 | if (err) |
| 346 | goto exit; |
| 347 | } |
| 348 | for (i = 0; i < hw->gpio_cs_count; i++) { |
| 349 | err = gpio_request(hw->gpio_cs[i], dev_name(&pdev->dev)); |
| 350 | if (err) |
| 351 | goto exit_gpio; |
| 352 | gpio_direction_output(hw->gpio_cs[i], 1); |
| 353 | } |
| 354 | hw->bitbang.master->num_chipselect = max(1U, hw->gpio_cs_count); |
| 355 | |
| 356 | /* register our spi controller */ |
| 357 | err = spi_bitbang_start(&hw->bitbang); |
| 358 | if (err) |
| 359 | goto exit; |
| 360 | dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq); |
| 361 | |
| 362 | return 0; |
| 363 | |
| 364 | exit_gpio: |
| 365 | while (i-- > 0) |
| 366 | gpio_free(hw->gpio_cs[i]); |
| 367 | exit_busy: |
| 368 | err = -EBUSY; |
| 369 | exit: |
| 370 | platform_set_drvdata(pdev, NULL); |
| 371 | spi_master_put(master); |
| 372 | return err; |
| 373 | } |
| 374 | |
| 375 | static int __devexit tiny_spi_remove(struct platform_device *pdev) |
| 376 | { |
| 377 | struct tiny_spi *hw = platform_get_drvdata(pdev); |
| 378 | struct spi_master *master = hw->bitbang.master; |
| 379 | unsigned int i; |
| 380 | |
| 381 | spi_bitbang_stop(&hw->bitbang); |
| 382 | for (i = 0; i < hw->gpio_cs_count; i++) |
| 383 | gpio_free(hw->gpio_cs[i]); |
| 384 | platform_set_drvdata(pdev, NULL); |
| 385 | spi_master_put(master); |
| 386 | return 0; |
| 387 | } |
| 388 | |
| 389 | #ifdef CONFIG_OF |
| 390 | static const struct of_device_id tiny_spi_match[] = { |
| 391 | { .compatible = "opencores,tiny-spi-rtlsvn2", }, |
| 392 | {}, |
| 393 | }; |
| 394 | MODULE_DEVICE_TABLE(of, tiny_spi_match); |
| 395 | #else /* CONFIG_OF */ |
| 396 | #define tiny_spi_match NULL |
| 397 | #endif /* CONFIG_OF */ |
| 398 | |
| 399 | static struct platform_driver tiny_spi_driver = { |
| 400 | .probe = tiny_spi_probe, |
| 401 | .remove = __devexit_p(tiny_spi_remove), |
| 402 | .driver = { |
| 403 | .name = DRV_NAME, |
| 404 | .owner = THIS_MODULE, |
| 405 | .pm = NULL, |
| 406 | .of_match_table = tiny_spi_match, |
| 407 | }, |
| 408 | }; |
| 409 | |
| 410 | static int __init tiny_spi_init(void) |
| 411 | { |
| 412 | return platform_driver_register(&tiny_spi_driver); |
| 413 | } |
| 414 | module_init(tiny_spi_init); |
| 415 | |
| 416 | static void __exit tiny_spi_exit(void) |
| 417 | { |
| 418 | platform_driver_unregister(&tiny_spi_driver); |
| 419 | } |
| 420 | module_exit(tiny_spi_exit); |
| 421 | |
| 422 | MODULE_DESCRIPTION("OpenCores tiny SPI driver"); |
| 423 | MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>"); |
| 424 | MODULE_LICENSE("GPL"); |
| 425 | MODULE_ALIAS("platform:" DRV_NAME); |