Gennady Sharapov | abaf697 | 2006-01-18 17:42:46 -0800 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright (C) 2002- 2004 Jeff Dike (jdike@addtoit.com) |
| 3 | * Licensed under the GPL |
| 4 | */ |
| 5 | |
| 6 | #include <stdlib.h> |
| 7 | #include <string.h> |
| 8 | #include <unistd.h> |
| 9 | #include <errno.h> |
| 10 | #include <signal.h> |
| 11 | #include <setjmp.h> |
| 12 | #include <sched.h> |
| 13 | #include "ptrace_user.h" |
| 14 | #include <sys/wait.h> |
| 15 | #include <sys/mman.h> |
| 16 | #include <sys/user.h> |
| 17 | #include <sys/time.h> |
| 18 | #include <asm/unistd.h> |
| 19 | #include <asm/types.h> |
| 20 | #include "user.h" |
| 21 | #include "sysdep/ptrace.h" |
| 22 | #include "user_util.h" |
| 23 | #include "kern_util.h" |
| 24 | #include "skas.h" |
| 25 | #include "stub-data.h" |
| 26 | #include "mm_id.h" |
| 27 | #include "sysdep/sigcontext.h" |
| 28 | #include "sysdep/stub.h" |
| 29 | #include "os.h" |
| 30 | #include "proc_mm.h" |
| 31 | #include "skas_ptrace.h" |
| 32 | #include "chan_user.h" |
| 33 | #include "registers.h" |
| 34 | #include "mem.h" |
| 35 | #include "uml-config.h" |
| 36 | #include "process.h" |
| 37 | |
| 38 | int is_skas_winch(int pid, int fd, void *data) |
| 39 | { |
| 40 | if(pid != os_getpgrp()) |
| 41 | return(0); |
| 42 | |
| 43 | register_winch_irq(-1, fd, -1, data); |
| 44 | return(1); |
| 45 | } |
| 46 | |
| 47 | void wait_stub_done(int pid, int sig, char * fname) |
| 48 | { |
| 49 | int n, status, err; |
| 50 | |
| 51 | do { |
| 52 | if ( sig != -1 ) { |
| 53 | err = ptrace(PTRACE_CONT, pid, 0, sig); |
| 54 | if(err) |
| 55 | panic("%s : continue failed, errno = %d\n", |
| 56 | fname, errno); |
| 57 | } |
| 58 | sig = 0; |
| 59 | |
| 60 | CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); |
| 61 | } while((n >= 0) && WIFSTOPPED(status) && |
| 62 | ((WSTOPSIG(status) == SIGVTALRM) || |
| 63 | /* running UML inside a detached screen can cause |
| 64 | * SIGWINCHes |
| 65 | */ |
| 66 | (WSTOPSIG(status) == SIGWINCH))); |
| 67 | |
| 68 | if((n < 0) || !WIFSTOPPED(status) || |
| 69 | (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){ |
| 70 | unsigned long regs[HOST_FRAME_SIZE]; |
| 71 | |
| 72 | if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0) |
| 73 | printk("Failed to get registers from stub, " |
| 74 | "errno = %d\n", errno); |
| 75 | else { |
| 76 | int i; |
| 77 | |
| 78 | printk("Stub registers -\n"); |
| 79 | for(i = 0; i < HOST_FRAME_SIZE; i++) |
| 80 | printk("\t%d - %lx\n", i, regs[i]); |
| 81 | } |
| 82 | panic("%s : failed to wait for SIGUSR1/SIGTRAP, " |
| 83 | "pid = %d, n = %d, errno = %d, status = 0x%x\n", |
| 84 | fname, pid, n, errno, status); |
| 85 | } |
| 86 | } |
| 87 | |
| 88 | extern unsigned long current_stub_stack(void); |
| 89 | |
| 90 | void get_skas_faultinfo(int pid, struct faultinfo * fi) |
| 91 | { |
| 92 | int err; |
| 93 | |
| 94 | if(ptrace_faultinfo){ |
| 95 | err = ptrace(PTRACE_FAULTINFO, pid, 0, fi); |
| 96 | if(err) |
| 97 | panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, " |
| 98 | "errno = %d\n", errno); |
| 99 | |
| 100 | /* Special handling for i386, which has different structs */ |
| 101 | if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo)) |
| 102 | memset((char *)fi + sizeof(struct ptrace_faultinfo), 0, |
| 103 | sizeof(struct faultinfo) - |
| 104 | sizeof(struct ptrace_faultinfo)); |
| 105 | } |
| 106 | else { |
| 107 | wait_stub_done(pid, SIGSEGV, "get_skas_faultinfo"); |
| 108 | |
| 109 | /* faultinfo is prepared by the stub-segv-handler at start of |
| 110 | * the stub stack page. We just have to copy it. |
| 111 | */ |
| 112 | memcpy(fi, (void *)current_stub_stack(), sizeof(*fi)); |
| 113 | } |
| 114 | } |
| 115 | |
| 116 | static void handle_segv(int pid, union uml_pt_regs * regs) |
| 117 | { |
| 118 | get_skas_faultinfo(pid, ®s->skas.faultinfo); |
| 119 | segv(regs->skas.faultinfo, 0, 1, NULL); |
| 120 | } |
| 121 | |
| 122 | /*To use the same value of using_sysemu as the caller, ask it that value (in local_using_sysemu)*/ |
| 123 | static void handle_trap(int pid, union uml_pt_regs *regs, int local_using_sysemu) |
| 124 | { |
| 125 | int err, status; |
| 126 | |
| 127 | /* Mark this as a syscall */ |
| 128 | UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->skas.regs); |
| 129 | |
| 130 | if (!local_using_sysemu) |
| 131 | { |
| 132 | err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET, |
| 133 | __NR_getpid); |
| 134 | if(err < 0) |
| 135 | panic("handle_trap - nullifying syscall failed errno = %d\n", |
| 136 | errno); |
| 137 | |
| 138 | err = ptrace(PTRACE_SYSCALL, pid, 0, 0); |
| 139 | if(err < 0) |
| 140 | panic("handle_trap - continuing to end of syscall failed, " |
| 141 | "errno = %d\n", errno); |
| 142 | |
| 143 | CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED)); |
| 144 | if((err < 0) || !WIFSTOPPED(status) || |
| 145 | (WSTOPSIG(status) != SIGTRAP + 0x80)) |
| 146 | panic("handle_trap - failed to wait at end of syscall, " |
| 147 | "errno = %d, status = %d\n", errno, status); |
| 148 | } |
| 149 | |
| 150 | handle_syscall(regs); |
| 151 | } |
| 152 | |
| 153 | extern int __syscall_stub_start; |
| 154 | int stub_code_fd = -1; |
| 155 | __u64 stub_code_offset; |
| 156 | |
| 157 | static int userspace_tramp(void *stack) |
| 158 | { |
| 159 | void *addr; |
| 160 | |
| 161 | ptrace(PTRACE_TRACEME, 0, 0, 0); |
| 162 | |
| 163 | init_new_thread_signals(1); |
| 164 | enable_timer(); |
| 165 | |
| 166 | if(!proc_mm){ |
| 167 | /* This has a pte, but it can't be mapped in with the usual |
| 168 | * tlb_flush mechanism because this is part of that mechanism |
| 169 | */ |
| 170 | addr = mmap64((void *) UML_CONFIG_STUB_CODE, page_size(), |
| 171 | PROT_EXEC, MAP_FIXED | MAP_PRIVATE, |
| 172 | stub_code_fd, stub_code_offset); |
| 173 | if(addr == MAP_FAILED){ |
| 174 | printk("mapping stub code failed, errno = %d\n", |
| 175 | errno); |
| 176 | exit(1); |
| 177 | } |
| 178 | |
| 179 | if(stack != NULL){ |
| 180 | int fd; |
| 181 | __u64 offset; |
| 182 | fd = phys_mapping(to_phys(stack), &offset); |
| 183 | addr = mmap((void *) UML_CONFIG_STUB_DATA, page_size(), |
| 184 | PROT_READ | PROT_WRITE, |
| 185 | MAP_FIXED | MAP_SHARED, fd, offset); |
| 186 | if(addr == MAP_FAILED){ |
| 187 | printk("mapping stub stack failed, " |
| 188 | "errno = %d\n", errno); |
| 189 | exit(1); |
| 190 | } |
| 191 | } |
| 192 | } |
| 193 | if(!ptrace_faultinfo){ |
| 194 | unsigned long v = UML_CONFIG_STUB_CODE + |
| 195 | (unsigned long) stub_segv_handler - |
| 196 | (unsigned long) &__syscall_stub_start; |
| 197 | |
| 198 | set_sigstack((void *) UML_CONFIG_STUB_DATA, page_size()); |
| 199 | set_handler(SIGSEGV, (void *) v, SA_ONSTACK, |
| 200 | SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, |
| 201 | SIGUSR1, -1); |
| 202 | } |
| 203 | |
| 204 | os_stop_process(os_getpid()); |
| 205 | return(0); |
| 206 | } |
| 207 | |
| 208 | /* Each element set once, and only accessed by a single processor anyway */ |
| 209 | #undef NR_CPUS |
| 210 | #define NR_CPUS 1 |
| 211 | int userspace_pid[NR_CPUS]; |
| 212 | |
| 213 | int start_userspace(unsigned long stub_stack) |
| 214 | { |
| 215 | void *stack; |
| 216 | unsigned long sp; |
| 217 | int pid, status, n, flags; |
| 218 | |
| 219 | if ( stub_code_fd == -1 ) |
| 220 | stub_code_fd = phys_mapping(to_phys(&__syscall_stub_start), |
| 221 | &stub_code_offset); |
| 222 | |
| 223 | stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, |
| 224 | MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); |
| 225 | if(stack == MAP_FAILED) |
| 226 | panic("start_userspace : mmap failed, errno = %d", errno); |
| 227 | sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *); |
| 228 | |
| 229 | flags = CLONE_FILES | SIGCHLD; |
| 230 | if(proc_mm) flags |= CLONE_VM; |
| 231 | pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack); |
| 232 | if(pid < 0) |
| 233 | panic("start_userspace : clone failed, errno = %d", errno); |
| 234 | |
| 235 | do { |
| 236 | CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); |
| 237 | if(n < 0) |
| 238 | panic("start_userspace : wait failed, errno = %d", |
| 239 | errno); |
| 240 | } while(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM)); |
| 241 | |
| 242 | if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) |
| 243 | panic("start_userspace : expected SIGSTOP, got status = %d", |
| 244 | status); |
| 245 | |
| 246 | if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL, (void *)PTRACE_O_TRACESYSGOOD) < 0) |
| 247 | panic("start_userspace : PTRACE_OLDSETOPTIONS failed, errno=%d\n", |
| 248 | errno); |
| 249 | |
| 250 | if(munmap(stack, PAGE_SIZE) < 0) |
| 251 | panic("start_userspace : munmap failed, errno = %d\n", errno); |
| 252 | |
| 253 | return(pid); |
| 254 | } |
| 255 | |
| 256 | void userspace(union uml_pt_regs *regs) |
| 257 | { |
| 258 | int err, status, op, pid = userspace_pid[0]; |
| 259 | int local_using_sysemu; /*To prevent races if using_sysemu changes under us.*/ |
| 260 | |
| 261 | while(1){ |
| 262 | restore_registers(pid, regs); |
| 263 | |
| 264 | /* Now we set local_using_sysemu to be used for one loop */ |
| 265 | local_using_sysemu = get_using_sysemu(); |
| 266 | |
| 267 | op = SELECT_PTRACE_OPERATION(local_using_sysemu, singlestepping(NULL)); |
| 268 | |
| 269 | err = ptrace(op, pid, 0, 0); |
| 270 | if(err) |
| 271 | panic("userspace - could not resume userspace process, " |
| 272 | "pid=%d, ptrace operation = %d, errno = %d\n", |
| 273 | op, errno); |
| 274 | |
| 275 | CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED)); |
| 276 | if(err < 0) |
| 277 | panic("userspace - waitpid failed, errno = %d\n", |
| 278 | errno); |
| 279 | |
| 280 | regs->skas.is_user = 1; |
| 281 | save_registers(pid, regs); |
| 282 | UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */ |
| 283 | |
| 284 | if(WIFSTOPPED(status)){ |
| 285 | switch(WSTOPSIG(status)){ |
| 286 | case SIGSEGV: |
| 287 | if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo) |
| 288 | user_signal(SIGSEGV, regs, pid); |
| 289 | else handle_segv(pid, regs); |
| 290 | break; |
| 291 | case SIGTRAP + 0x80: |
| 292 | handle_trap(pid, regs, local_using_sysemu); |
| 293 | break; |
| 294 | case SIGTRAP: |
| 295 | relay_signal(SIGTRAP, regs); |
| 296 | break; |
| 297 | case SIGIO: |
| 298 | case SIGVTALRM: |
| 299 | case SIGILL: |
| 300 | case SIGBUS: |
| 301 | case SIGFPE: |
| 302 | case SIGWINCH: |
| 303 | user_signal(WSTOPSIG(status), regs, pid); |
| 304 | break; |
| 305 | default: |
| 306 | printk("userspace - child stopped with signal " |
| 307 | "%d\n", WSTOPSIG(status)); |
| 308 | } |
| 309 | again: |
| 310 | pid = userspace_pid[0]; |
| 311 | interrupt_end(); |
| 312 | |
| 313 | /* Avoid -ERESTARTSYS handling in host */ |
| 314 | if(PT_SYSCALL_NR_OFFSET != PT_SYSCALL_RET_OFFSET) |
| 315 | PT_SYSCALL_NR(regs->skas.regs) = -1; |
| 316 | } |
| 317 | } |
| 318 | } |
| 319 | #define INIT_JMP_NEW_THREAD 0 |
| 320 | #define INIT_JMP_REMOVE_SIGSTACK 1 |
| 321 | #define INIT_JMP_CALLBACK 2 |
| 322 | #define INIT_JMP_HALT 3 |
| 323 | #define INIT_JMP_REBOOT 4 |
| 324 | |
| 325 | int copy_context_skas0(unsigned long new_stack, int pid) |
| 326 | { |
| 327 | int err; |
| 328 | unsigned long regs[MAX_REG_NR]; |
| 329 | unsigned long current_stack = current_stub_stack(); |
| 330 | struct stub_data *data = (struct stub_data *) current_stack; |
| 331 | struct stub_data *child_data = (struct stub_data *) new_stack; |
| 332 | __u64 new_offset; |
| 333 | int new_fd = phys_mapping(to_phys((void *)new_stack), &new_offset); |
| 334 | |
| 335 | /* prepare offset and fd of child's stack as argument for parent's |
| 336 | * and child's mmap2 calls |
| 337 | */ |
| 338 | *data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset), |
| 339 | .fd = new_fd, |
| 340 | .timer = ((struct itimerval) |
| 341 | { { 0, 1000000 / hz() }, |
| 342 | { 0, 1000000 / hz() }})}); |
| 343 | get_safe_registers(regs); |
| 344 | |
| 345 | /* Set parent's instruction pointer to start of clone-stub */ |
| 346 | regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE + |
| 347 | (unsigned long) stub_clone_handler - |
| 348 | (unsigned long) &__syscall_stub_start; |
| 349 | regs[REGS_SP_INDEX] = UML_CONFIG_STUB_DATA + PAGE_SIZE - |
| 350 | sizeof(void *); |
| 351 | #ifdef __SIGNAL_FRAMESIZE |
| 352 | regs[REGS_SP_INDEX] -= __SIGNAL_FRAMESIZE; |
| 353 | #endif |
| 354 | err = ptrace_setregs(pid, regs); |
| 355 | if(err < 0) |
| 356 | panic("copy_context_skas0 : PTRACE_SETREGS failed, " |
| 357 | "pid = %d, errno = %d\n", pid, errno); |
| 358 | |
| 359 | /* set a well known return code for detection of child write failure */ |
| 360 | child_data->err = 12345678; |
| 361 | |
| 362 | /* Wait, until parent has finished its work: read child's pid from |
| 363 | * parent's stack, and check, if bad result. |
| 364 | */ |
| 365 | wait_stub_done(pid, 0, "copy_context_skas0"); |
| 366 | |
| 367 | pid = data->err; |
| 368 | if(pid < 0) |
| 369 | panic("copy_context_skas0 - stub-parent reports error %d\n", |
| 370 | pid); |
| 371 | |
| 372 | /* Wait, until child has finished too: read child's result from |
| 373 | * child's stack and check it. |
| 374 | */ |
| 375 | wait_stub_done(pid, -1, "copy_context_skas0"); |
| 376 | if (child_data->err != UML_CONFIG_STUB_DATA) |
| 377 | panic("copy_context_skas0 - stub-child reports error %d\n", |
| 378 | child_data->err); |
| 379 | |
| 380 | if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL, |
| 381 | (void *)PTRACE_O_TRACESYSGOOD) < 0) |
| 382 | panic("copy_context_skas0 : PTRACE_OLDSETOPTIONS failed, " |
| 383 | "errno = %d\n", errno); |
| 384 | |
| 385 | return pid; |
| 386 | } |
| 387 | |
| 388 | /* |
| 389 | * This is used only, if stub pages are needed, while proc_mm is |
| 390 | * availabl. Opening /proc/mm creates a new mm_context, which lacks |
| 391 | * the stub-pages. Thus, we map them using /proc/mm-fd |
| 392 | */ |
| 393 | void map_stub_pages(int fd, unsigned long code, |
| 394 | unsigned long data, unsigned long stack) |
| 395 | { |
| 396 | struct proc_mm_op mmop; |
| 397 | int n; |
| 398 | |
| 399 | mmop = ((struct proc_mm_op) { .op = MM_MMAP, |
| 400 | .u = |
| 401 | { .mmap = |
| 402 | { .addr = code, |
| 403 | .len = PAGE_SIZE, |
| 404 | .prot = PROT_EXEC, |
| 405 | .flags = MAP_FIXED | MAP_PRIVATE, |
| 406 | .fd = stub_code_fd, |
| 407 | .offset = stub_code_offset |
| 408 | } } }); |
| 409 | n = os_write_file(fd, &mmop, sizeof(mmop)); |
| 410 | if(n != sizeof(mmop)) |
| 411 | panic("map_stub_pages : /proc/mm map for code failed, " |
| 412 | "err = %d\n", -n); |
| 413 | |
| 414 | if ( stack ) { |
| 415 | __u64 map_offset; |
| 416 | int map_fd = phys_mapping(to_phys((void *)stack), &map_offset); |
| 417 | mmop = ((struct proc_mm_op) |
| 418 | { .op = MM_MMAP, |
| 419 | .u = |
| 420 | { .mmap = |
| 421 | { .addr = data, |
| 422 | .len = PAGE_SIZE, |
| 423 | .prot = PROT_READ | PROT_WRITE, |
| 424 | .flags = MAP_FIXED | MAP_SHARED, |
| 425 | .fd = map_fd, |
| 426 | .offset = map_offset |
| 427 | } } }); |
| 428 | n = os_write_file(fd, &mmop, sizeof(mmop)); |
| 429 | if(n != sizeof(mmop)) |
| 430 | panic("map_stub_pages : /proc/mm map for data failed, " |
| 431 | "err = %d\n", -n); |
| 432 | } |
| 433 | } |
| 434 | |
| 435 | void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr, |
| 436 | void (*handler)(int)) |
| 437 | { |
| 438 | unsigned long flags; |
| 439 | sigjmp_buf switch_buf, fork_buf; |
| 440 | |
| 441 | *switch_buf_ptr = &switch_buf; |
| 442 | *fork_buf_ptr = &fork_buf; |
| 443 | |
| 444 | /* Somewhat subtle - siglongjmp restores the signal mask before doing |
| 445 | * the longjmp. This means that when jumping from one stack to another |
| 446 | * when the target stack has interrupts enabled, an interrupt may occur |
| 447 | * on the source stack. This is bad when starting up a process because |
| 448 | * it's not supposed to get timer ticks until it has been scheduled. |
| 449 | * So, we disable interrupts around the sigsetjmp to ensure that |
| 450 | * they can't happen until we get back here where they are safe. |
| 451 | */ |
| 452 | flags = get_signals(); |
| 453 | block_signals(); |
| 454 | if(sigsetjmp(fork_buf, 1) == 0) |
| 455 | new_thread_proc(stack, handler); |
| 456 | |
| 457 | remove_sigstack(); |
| 458 | |
| 459 | set_signals(flags); |
| 460 | } |
| 461 | |
| 462 | void thread_wait(void *sw, void *fb) |
| 463 | { |
| 464 | sigjmp_buf buf, **switch_buf = sw, *fork_buf; |
| 465 | |
| 466 | *switch_buf = &buf; |
| 467 | fork_buf = fb; |
| 468 | if(sigsetjmp(buf, 1) == 0) |
| 469 | siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK); |
| 470 | } |
| 471 | |
| 472 | void switch_threads(void *me, void *next) |
| 473 | { |
| 474 | sigjmp_buf my_buf, **me_ptr = me, *next_buf = next; |
| 475 | |
| 476 | *me_ptr = &my_buf; |
| 477 | if(sigsetjmp(my_buf, 1) == 0) |
| 478 | siglongjmp(*next_buf, 1); |
| 479 | } |
| 480 | |
| 481 | static sigjmp_buf initial_jmpbuf; |
| 482 | |
| 483 | /* XXX Make these percpu */ |
| 484 | static void (*cb_proc)(void *arg); |
| 485 | static void *cb_arg; |
| 486 | static sigjmp_buf *cb_back; |
| 487 | |
| 488 | int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr) |
| 489 | { |
| 490 | sigjmp_buf **switch_buf = switch_buf_ptr; |
| 491 | int n; |
| 492 | |
| 493 | set_handler(SIGWINCH, (__sighandler_t) sig_handler, |
| 494 | SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM, |
| 495 | SIGVTALRM, -1); |
| 496 | |
| 497 | *fork_buf_ptr = &initial_jmpbuf; |
| 498 | n = sigsetjmp(initial_jmpbuf, 1); |
| 499 | switch(n){ |
| 500 | case INIT_JMP_NEW_THREAD: |
| 501 | new_thread_proc((void *) stack, new_thread_handler); |
| 502 | break; |
| 503 | case INIT_JMP_REMOVE_SIGSTACK: |
| 504 | remove_sigstack(); |
| 505 | break; |
| 506 | case INIT_JMP_CALLBACK: |
| 507 | (*cb_proc)(cb_arg); |
| 508 | siglongjmp(*cb_back, 1); |
| 509 | break; |
| 510 | case INIT_JMP_HALT: |
| 511 | kmalloc_ok = 0; |
| 512 | return(0); |
| 513 | case INIT_JMP_REBOOT: |
| 514 | kmalloc_ok = 0; |
| 515 | return(1); |
| 516 | default: |
| 517 | panic("Bad sigsetjmp return in start_idle_thread - %d\n", n); |
| 518 | } |
| 519 | siglongjmp(**switch_buf, 1); |
| 520 | } |
| 521 | |
| 522 | void initial_thread_cb_skas(void (*proc)(void *), void *arg) |
| 523 | { |
| 524 | sigjmp_buf here; |
| 525 | |
| 526 | cb_proc = proc; |
| 527 | cb_arg = arg; |
| 528 | cb_back = &here; |
| 529 | |
| 530 | block_signals(); |
| 531 | if(sigsetjmp(here, 1) == 0) |
| 532 | siglongjmp(initial_jmpbuf, INIT_JMP_CALLBACK); |
| 533 | unblock_signals(); |
| 534 | |
| 535 | cb_proc = NULL; |
| 536 | cb_arg = NULL; |
| 537 | cb_back = NULL; |
| 538 | } |
| 539 | |
| 540 | void halt_skas(void) |
| 541 | { |
| 542 | block_signals(); |
| 543 | siglongjmp(initial_jmpbuf, INIT_JMP_HALT); |
| 544 | } |
| 545 | |
| 546 | void reboot_skas(void) |
| 547 | { |
| 548 | block_signals(); |
| 549 | siglongjmp(initial_jmpbuf, INIT_JMP_REBOOT); |
| 550 | } |
| 551 | |
| 552 | void switch_mm_skas(struct mm_id *mm_idp) |
| 553 | { |
| 554 | int err; |
| 555 | |
| 556 | #warning need cpu pid in switch_mm_skas |
| 557 | if(proc_mm){ |
| 558 | err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0, |
| 559 | mm_idp->u.mm_fd); |
| 560 | if(err) |
| 561 | panic("switch_mm_skas - PTRACE_SWITCH_MM failed, " |
| 562 | "errno = %d\n", errno); |
| 563 | } |
| 564 | else userspace_pid[0] = mm_idp->u.pid; |
| 565 | } |