Laxman Dewangan | 6219929 | 2012-01-09 20:27:41 +0530 | [diff] [blame] | 1 | /* |
| 2 | * tps62360.c -- TI tps62360 |
| 3 | * |
| 4 | * Driver for processor core supply tps62360 and tps62361B |
| 5 | * |
| 6 | * Copyright (c) 2012, NVIDIA Corporation. |
| 7 | * |
| 8 | * Author: Laxman Dewangan <ldewangan@nvidia.com> |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or |
| 11 | * modify it under the terms of the GNU General Public License as |
| 12 | * published by the Free Software Foundation version 2. |
| 13 | * |
| 14 | * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, |
| 15 | * whether express or implied; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 17 | * General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA |
| 22 | * 02111-1307, USA |
| 23 | */ |
| 24 | |
| 25 | #include <linux/kernel.h> |
| 26 | #include <linux/module.h> |
| 27 | #include <linux/init.h> |
| 28 | #include <linux/err.h> |
| 29 | #include <linux/platform_device.h> |
| 30 | #include <linux/regulator/driver.h> |
| 31 | #include <linux/regulator/machine.h> |
| 32 | #include <linux/regulator/tps62360.h> |
| 33 | #include <linux/gpio.h> |
| 34 | #include <linux/i2c.h> |
| 35 | #include <linux/delay.h> |
| 36 | #include <linux/slab.h> |
| 37 | #include <linux/regmap.h> |
| 38 | |
| 39 | /* Register definitions */ |
| 40 | #define REG_VSET0 0 |
| 41 | #define REG_VSET1 1 |
| 42 | #define REG_VSET2 2 |
| 43 | #define REG_VSET3 3 |
| 44 | #define REG_CONTROL 4 |
| 45 | #define REG_TEMP 5 |
| 46 | #define REG_RAMPCTRL 6 |
| 47 | #define REG_CHIPID 8 |
| 48 | |
| 49 | enum chips {TPS62360, TPS62361}; |
| 50 | |
| 51 | #define TPS62360_BASE_VOLTAGE 770 |
| 52 | #define TPS62360_N_VOLTAGES 64 |
| 53 | |
| 54 | #define TPS62361_BASE_VOLTAGE 500 |
| 55 | #define TPS62361_N_VOLTAGES 128 |
| 56 | |
| 57 | /* tps 62360 chip information */ |
| 58 | struct tps62360_chip { |
| 59 | const char *name; |
| 60 | struct device *dev; |
| 61 | struct regulator_desc desc; |
| 62 | struct i2c_client *client; |
| 63 | struct regulator_dev *rdev; |
| 64 | struct regmap *regmap; |
| 65 | int chip_id; |
| 66 | int vsel0_gpio; |
| 67 | int vsel1_gpio; |
| 68 | int voltage_base; |
| 69 | u8 voltage_reg_mask; |
| 70 | bool en_internal_pulldn; |
| 71 | bool en_force_pwm; |
| 72 | bool en_discharge; |
| 73 | bool valid_gpios; |
| 74 | int lru_index[4]; |
| 75 | int curr_vset_vsel[4]; |
| 76 | int curr_vset_id; |
| 77 | }; |
| 78 | |
| 79 | /* |
| 80 | * find_voltage_set_register: Find new voltage configuration register |
| 81 | * (VSET) id. |
| 82 | * The finding of the new VSET register will be based on the LRU mechanism. |
| 83 | * Each VSET register will have different voltage configured . This |
| 84 | * Function will look if any of the VSET register have requested voltage set |
| 85 | * or not. |
| 86 | * - If it is already there then it will make that register as most |
| 87 | * recently used and return as found so that caller need not to set |
| 88 | * the VSET register but need to set the proper gpios to select this |
| 89 | * VSET register. |
| 90 | * - If requested voltage is not found then it will use the least |
| 91 | * recently mechanism to get new VSET register for new configuration |
| 92 | * and will return not_found so that caller need to set new VSET |
| 93 | * register and then gpios (both). |
| 94 | */ |
| 95 | static bool find_voltage_set_register(struct tps62360_chip *tps, |
| 96 | int req_vsel, int *vset_reg_id) |
| 97 | { |
| 98 | int i; |
| 99 | bool found = false; |
| 100 | int new_vset_reg = tps->lru_index[3]; |
| 101 | int found_index = 3; |
| 102 | for (i = 0; i < 4; ++i) { |
| 103 | if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) { |
| 104 | new_vset_reg = tps->lru_index[i]; |
| 105 | found_index = i; |
| 106 | found = true; |
| 107 | goto update_lru_index; |
| 108 | } |
| 109 | } |
| 110 | |
| 111 | update_lru_index: |
| 112 | for (i = found_index; i > 0; i--) |
| 113 | tps->lru_index[i] = tps->lru_index[i - 1]; |
| 114 | |
| 115 | tps->lru_index[0] = new_vset_reg; |
| 116 | *vset_reg_id = new_vset_reg; |
| 117 | return found; |
| 118 | } |
| 119 | |
| 120 | static int tps62360_dcdc_get_voltage(struct regulator_dev *dev) |
| 121 | { |
| 122 | struct tps62360_chip *tps = rdev_get_drvdata(dev); |
| 123 | int vsel; |
| 124 | unsigned int data; |
| 125 | int ret; |
| 126 | |
| 127 | ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); |
| 128 | if (ret < 0) { |
| 129 | dev_err(tps->dev, "%s: Error in reading register %d\n", |
| 130 | __func__, REG_VSET0 + tps->curr_vset_id); |
| 131 | return ret; |
| 132 | } |
| 133 | vsel = (int)data & tps->voltage_reg_mask; |
| 134 | return (tps->voltage_base + vsel * 10) * 1000; |
| 135 | } |
| 136 | |
| 137 | static int tps62360_dcdc_set_voltage(struct regulator_dev *dev, |
| 138 | int min_uV, int max_uV, unsigned *selector) |
| 139 | { |
| 140 | struct tps62360_chip *tps = rdev_get_drvdata(dev); |
| 141 | int vsel; |
| 142 | int ret; |
| 143 | bool found = false; |
| 144 | int new_vset_id = tps->curr_vset_id; |
| 145 | |
| 146 | if (max_uV < min_uV) |
| 147 | return -EINVAL; |
| 148 | |
| 149 | if (min_uV > |
| 150 | ((tps->voltage_base + (tps->desc.n_voltages - 1) * 10) * 1000)) |
| 151 | return -EINVAL; |
| 152 | |
| 153 | if (max_uV < tps->voltage_base * 1000) |
| 154 | return -EINVAL; |
| 155 | |
| 156 | vsel = DIV_ROUND_UP(min_uV - (tps->voltage_base * 1000), 10000); |
| 157 | if (selector) |
| 158 | *selector = (vsel & tps->voltage_reg_mask); |
| 159 | |
| 160 | /* |
| 161 | * If gpios are available to select the VSET register then least |
| 162 | * recently used register for new configuration. |
| 163 | */ |
| 164 | if (tps->valid_gpios) |
| 165 | found = find_voltage_set_register(tps, vsel, &new_vset_id); |
| 166 | |
| 167 | if (!found) { |
| 168 | ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id, |
| 169 | tps->voltage_reg_mask, vsel); |
| 170 | if (ret < 0) { |
| 171 | dev_err(tps->dev, "%s: Error in updating register %d\n", |
| 172 | __func__, REG_VSET0 + new_vset_id); |
| 173 | return ret; |
| 174 | } |
| 175 | tps->curr_vset_id = new_vset_id; |
| 176 | tps->curr_vset_vsel[new_vset_id] = vsel; |
| 177 | } |
| 178 | |
| 179 | /* Select proper VSET register vio gpios */ |
| 180 | if (tps->valid_gpios) { |
| 181 | gpio_set_value_cansleep(tps->vsel0_gpio, |
| 182 | new_vset_id & 0x1); |
| 183 | gpio_set_value_cansleep(tps->vsel1_gpio, |
| 184 | (new_vset_id >> 1) & 0x1); |
| 185 | } |
| 186 | return 0; |
| 187 | } |
| 188 | |
| 189 | static int tps62360_dcdc_list_voltage(struct regulator_dev *dev, |
| 190 | unsigned selector) |
| 191 | { |
| 192 | struct tps62360_chip *tps = rdev_get_drvdata(dev); |
| 193 | |
Axel Lin | 46783a0 | 2012-02-07 11:06:20 +0800 | [diff] [blame] | 194 | if (selector >= tps->desc.n_voltages) |
Laxman Dewangan | 6219929 | 2012-01-09 20:27:41 +0530 | [diff] [blame] | 195 | return -EINVAL; |
| 196 | return (tps->voltage_base + selector * 10) * 1000; |
| 197 | } |
| 198 | |
| 199 | static struct regulator_ops tps62360_dcdc_ops = { |
| 200 | .get_voltage = tps62360_dcdc_get_voltage, |
| 201 | .set_voltage = tps62360_dcdc_set_voltage, |
| 202 | .list_voltage = tps62360_dcdc_list_voltage, |
| 203 | }; |
| 204 | |
| 205 | static int tps62360_init_force_pwm(struct tps62360_chip *tps, |
| 206 | struct tps62360_regulator_platform_data *pdata, |
| 207 | int vset_id) |
| 208 | { |
| 209 | unsigned int data; |
| 210 | int ret; |
| 211 | ret = regmap_read(tps->regmap, REG_VSET0 + vset_id, &data); |
| 212 | if (ret < 0) { |
| 213 | dev_err(tps->dev, "%s() fails in writing reg %d\n", |
| 214 | __func__, REG_VSET0 + vset_id); |
| 215 | return ret; |
| 216 | } |
| 217 | tps->curr_vset_vsel[vset_id] = data & tps->voltage_reg_mask; |
| 218 | if (pdata->en_force_pwm) |
| 219 | data |= BIT(7); |
| 220 | else |
| 221 | data &= ~BIT(7); |
| 222 | ret = regmap_write(tps->regmap, REG_VSET0 + vset_id, data); |
| 223 | if (ret < 0) |
| 224 | dev_err(tps->dev, "%s() fails in writing reg %d\n", |
| 225 | __func__, REG_VSET0 + vset_id); |
| 226 | return ret; |
| 227 | } |
| 228 | |
| 229 | static int tps62360_init_dcdc(struct tps62360_chip *tps, |
| 230 | struct tps62360_regulator_platform_data *pdata) |
| 231 | { |
| 232 | int ret; |
| 233 | int i; |
| 234 | |
| 235 | /* Initailize internal pull up/down control */ |
| 236 | if (tps->en_internal_pulldn) |
| 237 | ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0); |
| 238 | else |
| 239 | ret = regmap_write(tps->regmap, REG_CONTROL, 0x0); |
| 240 | if (ret < 0) { |
| 241 | dev_err(tps->dev, "%s() fails in writing reg %d\n", |
| 242 | __func__, REG_CONTROL); |
| 243 | return ret; |
| 244 | } |
| 245 | |
| 246 | /* Initailize force PWM mode */ |
| 247 | if (tps->valid_gpios) { |
| 248 | for (i = 0; i < 4; ++i) { |
| 249 | ret = tps62360_init_force_pwm(tps, pdata, i); |
| 250 | if (ret < 0) |
| 251 | return ret; |
| 252 | } |
| 253 | } else { |
| 254 | ret = tps62360_init_force_pwm(tps, pdata, tps->curr_vset_id); |
| 255 | if (ret < 0) |
| 256 | return ret; |
| 257 | } |
| 258 | |
| 259 | /* Reset output discharge path to reduce power consumption */ |
| 260 | ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0); |
| 261 | if (ret < 0) |
| 262 | dev_err(tps->dev, "%s() fails in updating reg %d\n", |
| 263 | __func__, REG_RAMPCTRL); |
| 264 | return ret; |
| 265 | } |
| 266 | |
| 267 | static const struct regmap_config tps62360_regmap_config = { |
| 268 | .reg_bits = 8, |
| 269 | .val_bits = 8, |
| 270 | }; |
| 271 | |
| 272 | static int __devinit tps62360_probe(struct i2c_client *client, |
| 273 | const struct i2c_device_id *id) |
| 274 | { |
| 275 | struct tps62360_regulator_platform_data *pdata; |
| 276 | struct regulator_dev *rdev; |
| 277 | struct tps62360_chip *tps; |
| 278 | int ret; |
| 279 | int i; |
| 280 | |
| 281 | pdata = client->dev.platform_data; |
| 282 | if (!pdata) { |
| 283 | dev_err(&client->dev, "%s() Err: Platform data not found\n", |
| 284 | __func__); |
| 285 | return -EIO; |
| 286 | } |
| 287 | |
| 288 | tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); |
| 289 | if (!tps) { |
| 290 | dev_err(&client->dev, "%s() Err: Memory allocation fails\n", |
| 291 | __func__); |
| 292 | return -ENOMEM; |
| 293 | } |
| 294 | |
| 295 | tps->en_force_pwm = pdata->en_force_pwm; |
| 296 | tps->en_discharge = pdata->en_discharge; |
| 297 | tps->en_internal_pulldn = pdata->en_internal_pulldn; |
| 298 | tps->vsel0_gpio = pdata->vsel0_gpio; |
| 299 | tps->vsel1_gpio = pdata->vsel1_gpio; |
| 300 | tps->client = client; |
| 301 | tps->dev = &client->dev; |
| 302 | tps->name = id->name; |
| 303 | tps->voltage_base = (id->driver_data == TPS62360) ? |
| 304 | TPS62360_BASE_VOLTAGE : TPS62361_BASE_VOLTAGE; |
| 305 | tps->voltage_reg_mask = (id->driver_data == TPS62360) ? 0x3F : 0x7F; |
| 306 | |
| 307 | tps->desc.name = id->name; |
| 308 | tps->desc.id = 0; |
| 309 | tps->desc.n_voltages = (id->driver_data == TPS62360) ? |
| 310 | TPS62360_N_VOLTAGES : TPS62361_N_VOLTAGES; |
| 311 | tps->desc.ops = &tps62360_dcdc_ops; |
| 312 | tps->desc.type = REGULATOR_VOLTAGE; |
| 313 | tps->desc.owner = THIS_MODULE; |
| 314 | tps->regmap = regmap_init_i2c(client, &tps62360_regmap_config); |
| 315 | if (IS_ERR(tps->regmap)) { |
| 316 | ret = PTR_ERR(tps->regmap); |
| 317 | dev_err(&client->dev, "%s() Err: Failed to allocate register" |
| 318 | "map: %d\n", __func__, ret); |
| 319 | return ret; |
| 320 | } |
| 321 | i2c_set_clientdata(client, tps); |
| 322 | |
| 323 | tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 + |
| 324 | (pdata->vsel0_def_state & 1); |
| 325 | tps->lru_index[0] = tps->curr_vset_id; |
| 326 | tps->valid_gpios = false; |
| 327 | |
| 328 | if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) { |
| 329 | ret = gpio_request(tps->vsel0_gpio, "tps62360-vsel0"); |
| 330 | if (ret) { |
| 331 | dev_err(&client->dev, |
| 332 | "Err: Could not obtain vsel0 GPIO %d: %d\n", |
| 333 | tps->vsel0_gpio, ret); |
| 334 | goto err_gpio0; |
| 335 | } |
| 336 | ret = gpio_direction_output(tps->vsel0_gpio, |
| 337 | pdata->vsel0_def_state); |
| 338 | if (ret) { |
| 339 | dev_err(&client->dev, "Err: Could not set direction of" |
| 340 | "vsel0 GPIO %d: %d\n", tps->vsel0_gpio, ret); |
| 341 | gpio_free(tps->vsel0_gpio); |
| 342 | goto err_gpio0; |
| 343 | } |
| 344 | |
| 345 | ret = gpio_request(tps->vsel1_gpio, "tps62360-vsel1"); |
| 346 | if (ret) { |
| 347 | dev_err(&client->dev, |
| 348 | "Err: Could not obtain vsel1 GPIO %d: %d\n", |
| 349 | tps->vsel1_gpio, ret); |
| 350 | goto err_gpio1; |
| 351 | } |
| 352 | ret = gpio_direction_output(tps->vsel1_gpio, |
| 353 | pdata->vsel1_def_state); |
| 354 | if (ret) { |
| 355 | dev_err(&client->dev, "Err: Could not set direction of" |
| 356 | "vsel1 GPIO %d: %d\n", tps->vsel1_gpio, ret); |
| 357 | gpio_free(tps->vsel1_gpio); |
| 358 | goto err_gpio1; |
| 359 | } |
| 360 | tps->valid_gpios = true; |
| 361 | |
| 362 | /* |
| 363 | * Initialize the lru index with vset_reg id |
| 364 | * The index 0 will be most recently used and |
| 365 | * set with the tps->curr_vset_id */ |
| 366 | for (i = 0; i < 4; ++i) |
| 367 | tps->lru_index[i] = i; |
| 368 | tps->lru_index[0] = tps->curr_vset_id; |
| 369 | tps->lru_index[tps->curr_vset_id] = 0; |
| 370 | } |
| 371 | |
| 372 | ret = tps62360_init_dcdc(tps, pdata); |
| 373 | if (ret < 0) { |
| 374 | dev_err(tps->dev, "%s() Err: Init fails with = %d\n", |
| 375 | __func__, ret); |
| 376 | goto err_init; |
| 377 | } |
| 378 | |
| 379 | /* Register the regulators */ |
| 380 | rdev = regulator_register(&tps->desc, &client->dev, |
| 381 | &pdata->reg_init_data, tps, NULL); |
| 382 | if (IS_ERR(rdev)) { |
| 383 | dev_err(tps->dev, "%s() Err: Failed to register %s\n", |
| 384 | __func__, id->name); |
| 385 | ret = PTR_ERR(rdev); |
| 386 | goto err_init; |
| 387 | } |
| 388 | |
| 389 | tps->rdev = rdev; |
| 390 | return 0; |
| 391 | |
| 392 | err_init: |
| 393 | if (gpio_is_valid(tps->vsel1_gpio)) |
| 394 | gpio_free(tps->vsel1_gpio); |
| 395 | err_gpio1: |
| 396 | if (gpio_is_valid(tps->vsel0_gpio)) |
| 397 | gpio_free(tps->vsel0_gpio); |
| 398 | err_gpio0: |
| 399 | regmap_exit(tps->regmap); |
| 400 | return ret; |
| 401 | } |
| 402 | |
| 403 | /** |
| 404 | * tps62360_remove - tps62360 driver i2c remove handler |
| 405 | * @client: i2c driver client device structure |
| 406 | * |
| 407 | * Unregister TPS driver as an i2c client device driver |
| 408 | */ |
| 409 | static int __devexit tps62360_remove(struct i2c_client *client) |
| 410 | { |
| 411 | struct tps62360_chip *tps = i2c_get_clientdata(client); |
| 412 | |
| 413 | if (gpio_is_valid(tps->vsel1_gpio)) |
| 414 | gpio_free(tps->vsel1_gpio); |
| 415 | |
| 416 | if (gpio_is_valid(tps->vsel0_gpio)) |
| 417 | gpio_free(tps->vsel0_gpio); |
| 418 | |
| 419 | regulator_unregister(tps->rdev); |
| 420 | regmap_exit(tps->regmap); |
| 421 | return 0; |
| 422 | } |
| 423 | |
| 424 | static void tps62360_shutdown(struct i2c_client *client) |
| 425 | { |
| 426 | struct tps62360_chip *tps = i2c_get_clientdata(client); |
| 427 | int st; |
| 428 | |
| 429 | if (!tps->en_discharge) |
| 430 | return; |
| 431 | |
| 432 | /* Configure the output discharge path */ |
| 433 | st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2)); |
| 434 | if (st < 0) |
| 435 | dev_err(tps->dev, "%s() fails in updating reg %d\n", |
| 436 | __func__, REG_RAMPCTRL); |
| 437 | } |
| 438 | |
| 439 | static const struct i2c_device_id tps62360_id[] = { |
| 440 | {.name = "tps62360", .driver_data = TPS62360}, |
| 441 | {.name = "tps62361", .driver_data = TPS62361}, |
| 442 | {}, |
| 443 | }; |
| 444 | |
| 445 | MODULE_DEVICE_TABLE(i2c, tps62360_id); |
| 446 | |
| 447 | static struct i2c_driver tps62360_i2c_driver = { |
| 448 | .driver = { |
| 449 | .name = "tps62360", |
| 450 | .owner = THIS_MODULE, |
| 451 | }, |
| 452 | .probe = tps62360_probe, |
| 453 | .remove = __devexit_p(tps62360_remove), |
| 454 | .shutdown = tps62360_shutdown, |
| 455 | .id_table = tps62360_id, |
| 456 | }; |
| 457 | |
| 458 | static int __init tps62360_init(void) |
| 459 | { |
| 460 | return i2c_add_driver(&tps62360_i2c_driver); |
| 461 | } |
| 462 | subsys_initcall(tps62360_init); |
| 463 | |
| 464 | static void __exit tps62360_cleanup(void) |
| 465 | { |
| 466 | i2c_del_driver(&tps62360_i2c_driver); |
| 467 | } |
| 468 | module_exit(tps62360_cleanup); |
| 469 | |
| 470 | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); |
| 471 | MODULE_DESCRIPTION("TPS62360 voltage regulator driver"); |
| 472 | MODULE_LICENSE("GPL v2"); |