Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 1 | /* |
| 2 | * Sonics Silicon Backplane |
| 3 | * PCMCIA-Hostbus related functions |
| 4 | * |
| 5 | * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> |
| 6 | * Copyright 2007 Michael Buesch <mb@bu3sch.de> |
| 7 | * |
| 8 | * Licensed under the GNU/GPL. See COPYING for details. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/ssb/ssb.h> |
| 12 | #include <linux/delay.h> |
Al Viro | 409f243 | 2007-10-14 05:51:51 +0100 | [diff] [blame] | 13 | #include <linux/io.h> |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 14 | |
| 15 | #include <pcmcia/cs_types.h> |
| 16 | #include <pcmcia/cs.h> |
| 17 | #include <pcmcia/cistpl.h> |
| 18 | #include <pcmcia/ciscode.h> |
| 19 | #include <pcmcia/ds.h> |
| 20 | #include <pcmcia/cisreg.h> |
| 21 | |
| 22 | #include "ssb_private.h" |
| 23 | |
| 24 | |
| 25 | /* Define the following to 1 to enable a printk on each coreswitch. */ |
| 26 | #define SSB_VERBOSE_PCMCIACORESWITCH_DEBUG 0 |
| 27 | |
| 28 | |
| 29 | int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus, |
| 30 | u8 coreidx) |
| 31 | { |
| 32 | struct pcmcia_device *pdev = bus->host_pcmcia; |
| 33 | int err; |
| 34 | int attempts = 0; |
| 35 | u32 cur_core; |
| 36 | conf_reg_t reg; |
| 37 | u32 addr; |
| 38 | u32 read_addr; |
| 39 | |
| 40 | addr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; |
| 41 | while (1) { |
| 42 | reg.Action = CS_WRITE; |
| 43 | reg.Offset = 0x2E; |
| 44 | reg.Value = (addr & 0x0000F000) >> 12; |
| 45 | err = pcmcia_access_configuration_register(pdev, ®); |
| 46 | if (err != CS_SUCCESS) |
| 47 | goto error; |
| 48 | reg.Offset = 0x30; |
| 49 | reg.Value = (addr & 0x00FF0000) >> 16; |
| 50 | err = pcmcia_access_configuration_register(pdev, ®); |
| 51 | if (err != CS_SUCCESS) |
| 52 | goto error; |
| 53 | reg.Offset = 0x32; |
| 54 | reg.Value = (addr & 0xFF000000) >> 24; |
| 55 | err = pcmcia_access_configuration_register(pdev, ®); |
| 56 | if (err != CS_SUCCESS) |
| 57 | goto error; |
| 58 | |
| 59 | read_addr = 0; |
| 60 | |
| 61 | reg.Action = CS_READ; |
| 62 | reg.Offset = 0x2E; |
| 63 | err = pcmcia_access_configuration_register(pdev, ®); |
| 64 | if (err != CS_SUCCESS) |
| 65 | goto error; |
| 66 | read_addr |= (reg.Value & 0xF) << 12; |
| 67 | reg.Offset = 0x30; |
| 68 | err = pcmcia_access_configuration_register(pdev, ®); |
| 69 | if (err != CS_SUCCESS) |
| 70 | goto error; |
| 71 | read_addr |= reg.Value << 16; |
| 72 | reg.Offset = 0x32; |
| 73 | err = pcmcia_access_configuration_register(pdev, ®); |
| 74 | if (err != CS_SUCCESS) |
| 75 | goto error; |
| 76 | read_addr |= reg.Value << 24; |
| 77 | |
| 78 | cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE; |
| 79 | if (cur_core == coreidx) |
| 80 | break; |
| 81 | |
| 82 | if (attempts++ > SSB_BAR0_MAX_RETRIES) |
| 83 | goto error; |
| 84 | udelay(10); |
| 85 | } |
| 86 | |
| 87 | return 0; |
| 88 | error: |
| 89 | ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); |
| 90 | return -ENODEV; |
| 91 | } |
| 92 | |
| 93 | int ssb_pcmcia_switch_core(struct ssb_bus *bus, |
| 94 | struct ssb_device *dev) |
| 95 | { |
| 96 | int err; |
| 97 | unsigned long flags; |
| 98 | |
| 99 | #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG |
| 100 | ssb_printk(KERN_INFO PFX |
| 101 | "Switching to %s core, index %d\n", |
| 102 | ssb_core_name(dev->id.coreid), |
| 103 | dev->core_index); |
| 104 | #endif |
| 105 | |
| 106 | spin_lock_irqsave(&bus->bar_lock, flags); |
| 107 | err = ssb_pcmcia_switch_coreidx(bus, dev->core_index); |
| 108 | if (!err) |
| 109 | bus->mapped_device = dev; |
| 110 | spin_unlock_irqrestore(&bus->bar_lock, flags); |
| 111 | |
| 112 | return err; |
| 113 | } |
| 114 | |
| 115 | int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg) |
| 116 | { |
| 117 | int attempts = 0; |
| 118 | unsigned long flags; |
| 119 | conf_reg_t reg; |
| 120 | int res, err = 0; |
| 121 | |
| 122 | SSB_WARN_ON((seg != 0) && (seg != 1)); |
| 123 | reg.Offset = 0x34; |
| 124 | reg.Function = 0; |
| 125 | spin_lock_irqsave(&bus->bar_lock, flags); |
| 126 | while (1) { |
| 127 | reg.Action = CS_WRITE; |
| 128 | reg.Value = seg; |
| 129 | res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); |
| 130 | if (unlikely(res != CS_SUCCESS)) |
| 131 | goto error; |
| 132 | reg.Value = 0xFF; |
| 133 | reg.Action = CS_READ; |
| 134 | res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); |
| 135 | if (unlikely(res != CS_SUCCESS)) |
| 136 | goto error; |
| 137 | |
| 138 | if (reg.Value == seg) |
| 139 | break; |
| 140 | |
| 141 | if (unlikely(attempts++ > SSB_BAR0_MAX_RETRIES)) |
| 142 | goto error; |
| 143 | udelay(10); |
| 144 | } |
| 145 | bus->mapped_pcmcia_seg = seg; |
| 146 | out_unlock: |
| 147 | spin_unlock_irqrestore(&bus->bar_lock, flags); |
| 148 | return err; |
| 149 | error: |
| 150 | ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n"); |
| 151 | err = -ENODEV; |
| 152 | goto out_unlock; |
| 153 | } |
| 154 | |
| 155 | /* These are the main device register access functions. |
| 156 | * do_select_core is inline to have the likely hotpath inline. |
| 157 | * All unlikely codepaths are out-of-line. */ |
| 158 | static inline int do_select_core(struct ssb_bus *bus, |
| 159 | struct ssb_device *dev, |
| 160 | u16 *offset) |
| 161 | { |
| 162 | int err; |
| 163 | u8 need_seg = (*offset >= 0x800) ? 1 : 0; |
| 164 | |
| 165 | if (unlikely(dev != bus->mapped_device)) { |
| 166 | err = ssb_pcmcia_switch_core(bus, dev); |
| 167 | if (unlikely(err)) |
| 168 | return err; |
| 169 | } |
| 170 | if (unlikely(need_seg != bus->mapped_pcmcia_seg)) { |
| 171 | err = ssb_pcmcia_switch_segment(bus, need_seg); |
| 172 | if (unlikely(err)) |
| 173 | return err; |
| 174 | } |
| 175 | if (need_seg == 1) |
| 176 | *offset -= 0x800; |
| 177 | |
| 178 | return 0; |
| 179 | } |
| 180 | |
| 181 | static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset) |
| 182 | { |
| 183 | struct ssb_bus *bus = dev->bus; |
| 184 | u16 x; |
| 185 | |
| 186 | if (unlikely(do_select_core(bus, dev, &offset))) |
| 187 | return 0xFFFF; |
| 188 | x = readw(bus->mmio + offset); |
| 189 | |
| 190 | return x; |
| 191 | } |
| 192 | |
| 193 | static u32 ssb_pcmcia_read32(struct ssb_device *dev, u16 offset) |
| 194 | { |
| 195 | struct ssb_bus *bus = dev->bus; |
| 196 | u32 x; |
| 197 | |
| 198 | if (unlikely(do_select_core(bus, dev, &offset))) |
| 199 | return 0xFFFFFFFF; |
| 200 | x = readl(bus->mmio + offset); |
| 201 | |
| 202 | return x; |
| 203 | } |
| 204 | |
| 205 | static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value) |
| 206 | { |
| 207 | struct ssb_bus *bus = dev->bus; |
| 208 | |
| 209 | if (unlikely(do_select_core(bus, dev, &offset))) |
| 210 | return; |
| 211 | writew(value, bus->mmio + offset); |
| 212 | } |
| 213 | |
| 214 | static void ssb_pcmcia_write32(struct ssb_device *dev, u16 offset, u32 value) |
| 215 | { |
| 216 | struct ssb_bus *bus = dev->bus; |
| 217 | |
| 218 | if (unlikely(do_select_core(bus, dev, &offset))) |
| 219 | return; |
| 220 | readw(bus->mmio + offset); |
| 221 | writew(value >> 16, bus->mmio + offset + 2); |
| 222 | readw(bus->mmio + offset); |
| 223 | writew(value, bus->mmio + offset); |
| 224 | } |
| 225 | |
| 226 | /* Not "static", as it's used in main.c */ |
| 227 | const struct ssb_bus_ops ssb_pcmcia_ops = { |
| 228 | .read16 = ssb_pcmcia_read16, |
| 229 | .read32 = ssb_pcmcia_read32, |
| 230 | .write16 = ssb_pcmcia_write16, |
| 231 | .write32 = ssb_pcmcia_write32, |
| 232 | }; |
| 233 | |
| 234 | int ssb_pcmcia_get_invariants(struct ssb_bus *bus, |
| 235 | struct ssb_init_invariants *iv) |
| 236 | { |
| 237 | //TODO |
| 238 | return 0; |
| 239 | } |
| 240 | |
| 241 | int ssb_pcmcia_init(struct ssb_bus *bus) |
| 242 | { |
| 243 | conf_reg_t reg; |
| 244 | int err; |
| 245 | |
| 246 | if (bus->bustype != SSB_BUSTYPE_PCMCIA) |
| 247 | return 0; |
| 248 | |
| 249 | /* Switch segment to a known state and sync |
| 250 | * bus->mapped_pcmcia_seg with hardware state. */ |
| 251 | ssb_pcmcia_switch_segment(bus, 0); |
| 252 | |
| 253 | /* Init IRQ routing */ |
| 254 | reg.Action = CS_READ; |
| 255 | reg.Function = 0; |
| 256 | if (bus->chip_id == 0x4306) |
| 257 | reg.Offset = 0x00; |
| 258 | else |
| 259 | reg.Offset = 0x80; |
| 260 | err = pcmcia_access_configuration_register(bus->host_pcmcia, ®); |
| 261 | if (err != CS_SUCCESS) |
| 262 | goto error; |
| 263 | reg.Action = CS_WRITE; |
| 264 | reg.Value |= 0x04 | 0x01; |
| 265 | err = pcmcia_access_configuration_register(bus->host_pcmcia, ®); |
| 266 | if (err != CS_SUCCESS) |
| 267 | goto error; |
| 268 | |
| 269 | return 0; |
| 270 | error: |
| 271 | return -ENODEV; |
| 272 | } |