Albert Herranz | 24ea602 | 2009-09-08 19:30:12 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Sonics Silicon Backplane |
| 3 | * SDIO-Hostbus related functions |
| 4 | * |
| 5 | * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es> |
| 6 | * |
| 7 | * Based on drivers/ssb/pcmcia.c |
| 8 | * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> |
| 9 | * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de> |
| 10 | * |
| 11 | * Licensed under the GNU/GPL. See COPYING for details. |
| 12 | * |
| 13 | */ |
| 14 | |
| 15 | #include <linux/ssb/ssb.h> |
| 16 | #include <linux/delay.h> |
| 17 | #include <linux/io.h> |
| 18 | #include <linux/etherdevice.h> |
| 19 | #include <linux/mmc/sdio_func.h> |
| 20 | |
| 21 | #include "ssb_private.h" |
| 22 | |
| 23 | /* Define the following to 1 to enable a printk on each coreswitch. */ |
Michael Buesch | 54a68d1 | 2009-09-11 16:08:06 +0200 | [diff] [blame] | 24 | #define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0 |
Albert Herranz | 24ea602 | 2009-09-08 19:30:12 +0200 | [diff] [blame] | 25 | |
| 26 | |
| 27 | /* Hardware invariants CIS tuples */ |
| 28 | #define SSB_SDIO_CIS 0x80 |
| 29 | #define SSB_SDIO_CIS_SROMREV 0x00 |
| 30 | #define SSB_SDIO_CIS_ID 0x01 |
| 31 | #define SSB_SDIO_CIS_BOARDREV 0x02 |
| 32 | #define SSB_SDIO_CIS_PA 0x03 |
| 33 | #define SSB_SDIO_CIS_PA_PA0B0_LO 0 |
| 34 | #define SSB_SDIO_CIS_PA_PA0B0_HI 1 |
| 35 | #define SSB_SDIO_CIS_PA_PA0B1_LO 2 |
| 36 | #define SSB_SDIO_CIS_PA_PA0B1_HI 3 |
| 37 | #define SSB_SDIO_CIS_PA_PA0B2_LO 4 |
| 38 | #define SSB_SDIO_CIS_PA_PA0B2_HI 5 |
| 39 | #define SSB_SDIO_CIS_PA_ITSSI 6 |
| 40 | #define SSB_SDIO_CIS_PA_MAXPOW 7 |
| 41 | #define SSB_SDIO_CIS_OEMNAME 0x04 |
| 42 | #define SSB_SDIO_CIS_CCODE 0x05 |
| 43 | #define SSB_SDIO_CIS_ANTENNA 0x06 |
| 44 | #define SSB_SDIO_CIS_ANTGAIN 0x07 |
| 45 | #define SSB_SDIO_CIS_BFLAGS 0x08 |
| 46 | #define SSB_SDIO_CIS_LEDS 0x09 |
| 47 | |
| 48 | #define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */ |
| 49 | |
| 50 | |
| 51 | /* |
| 52 | * Function 1 miscellaneous registers. |
| 53 | * |
| 54 | * Definitions match src/include/sbsdio.h from the |
| 55 | * Android Open Source Project |
| 56 | * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git |
| 57 | * |
| 58 | */ |
| 59 | #define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */ |
| 60 | #define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */ |
| 61 | #define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */ |
| 62 | |
| 63 | /* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */ |
| 64 | #define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */ |
| 65 | #define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */ |
| 66 | #define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */ |
| 67 | |
| 68 | #define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */ |
| 69 | |
| 70 | /* REVISIT: this flag doesn't seem to matter */ |
| 71 | #define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */ |
| 72 | |
| 73 | |
| 74 | /* |
| 75 | * Address map within the SDIO function address space (128K). |
| 76 | * |
| 77 | * Start End Description |
| 78 | * ------- ------- ------------------------------------------ |
| 79 | * 0x00000 0x0ffff selected backplane address window (64K) |
| 80 | * 0x10000 0x1ffff backplane control registers (max 64K) |
| 81 | * |
| 82 | * The current address window is configured by writing to registers |
| 83 | * SBADDRLOW, SBADDRMID and SBADDRHIGH. |
| 84 | * |
| 85 | * In order to access the contents of a 32-bit Silicon Backplane address |
| 86 | * the backplane address window must be first loaded with the highest |
| 87 | * 16 bits of the target address. Then, an access must be done to the |
| 88 | * SDIO function address space using the lower 15 bits of the address. |
| 89 | * Bit 15 of the address must be set when doing 32 bit accesses. |
| 90 | * |
| 91 | * 10987654321098765432109876543210 |
| 92 | * WWWWWWWWWWWWWWWWW SB Address Window |
| 93 | * OOOOOOOOOOOOOOOO Offset within SB Address Window |
| 94 | * a 32-bit access flag |
| 95 | */ |
| 96 | |
| 97 | |
| 98 | /* |
| 99 | * SSB I/O via SDIO. |
| 100 | * |
| 101 | * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K). |
| 102 | */ |
| 103 | |
| 104 | static inline struct device *ssb_sdio_dev(struct ssb_bus *bus) |
| 105 | { |
| 106 | return &bus->host_sdio->dev; |
| 107 | } |
| 108 | |
| 109 | /* host claimed */ |
| 110 | static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val) |
| 111 | { |
| 112 | int error = 0; |
| 113 | |
| 114 | sdio_writeb(bus->host_sdio, val, addr, &error); |
| 115 | if (unlikely(error)) { |
| 116 | dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n", |
| 117 | addr, val, error); |
| 118 | } |
| 119 | |
| 120 | return error; |
| 121 | } |
| 122 | |
| 123 | #if 0 |
| 124 | static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr) |
| 125 | { |
| 126 | u8 val; |
| 127 | int error = 0; |
| 128 | |
| 129 | val = sdio_readb(bus->host_sdio, addr, &error); |
| 130 | if (unlikely(error)) { |
| 131 | dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n", |
| 132 | addr, val, error); |
| 133 | } |
| 134 | |
| 135 | return val; |
| 136 | } |
| 137 | #endif |
| 138 | |
| 139 | /* host claimed */ |
| 140 | static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address) |
| 141 | { |
| 142 | int error; |
| 143 | |
| 144 | error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW, |
| 145 | (address >> 8) & SBSDIO_SBADDRLOW_MASK); |
| 146 | if (error) |
| 147 | goto out; |
| 148 | error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID, |
| 149 | (address >> 16) & SBSDIO_SBADDRMID_MASK); |
| 150 | if (error) |
| 151 | goto out; |
| 152 | error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH, |
| 153 | (address >> 24) & SBSDIO_SBADDRHIGH_MASK); |
| 154 | if (error) |
| 155 | goto out; |
| 156 | bus->sdio_sbaddr = address; |
| 157 | out: |
| 158 | if (error) { |
| 159 | dev_dbg(ssb_sdio_dev(bus), "failed to set address window" |
| 160 | " to 0x%08x, error %d\n", address, error); |
| 161 | } |
| 162 | |
| 163 | return error; |
| 164 | } |
| 165 | |
| 166 | /* for enumeration use only */ |
| 167 | u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset) |
| 168 | { |
| 169 | u32 val; |
| 170 | int error; |
| 171 | |
| 172 | sdio_claim_host(bus->host_sdio); |
| 173 | val = sdio_readl(bus->host_sdio, offset, &error); |
| 174 | sdio_release_host(bus->host_sdio); |
| 175 | if (unlikely(error)) { |
| 176 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n", |
| 177 | bus->sdio_sbaddr >> 16, offset, val, error); |
| 178 | } |
| 179 | |
| 180 | return val; |
| 181 | } |
| 182 | |
| 183 | /* for enumeration use only */ |
| 184 | int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx) |
| 185 | { |
| 186 | u32 sbaddr; |
| 187 | int error; |
| 188 | |
| 189 | sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; |
| 190 | sdio_claim_host(bus->host_sdio); |
| 191 | error = ssb_sdio_set_sbaddr_window(bus, sbaddr); |
| 192 | sdio_release_host(bus->host_sdio); |
| 193 | if (error) { |
| 194 | dev_err(ssb_sdio_dev(bus), "failed to switch to core %u," |
| 195 | " error %d\n", coreidx, error); |
| 196 | goto out; |
| 197 | } |
| 198 | out: |
| 199 | return error; |
| 200 | } |
| 201 | |
| 202 | /* host must be already claimed */ |
| 203 | int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev) |
| 204 | { |
| 205 | u8 coreidx = dev->core_index; |
| 206 | u32 sbaddr; |
| 207 | int error = 0; |
| 208 | |
| 209 | sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; |
| 210 | if (unlikely(bus->sdio_sbaddr != sbaddr)) { |
| 211 | #if SSB_VERBOSE_SDIOCORESWITCH_DEBUG |
| 212 | dev_info(ssb_sdio_dev(bus), |
| 213 | "switching to %s core, index %d\n", |
| 214 | ssb_core_name(dev->id.coreid), coreidx); |
| 215 | #endif |
| 216 | error = ssb_sdio_set_sbaddr_window(bus, sbaddr); |
| 217 | if (error) { |
| 218 | dev_dbg(ssb_sdio_dev(bus), "failed to switch to" |
| 219 | " core %u, error %d\n", coreidx, error); |
| 220 | goto out; |
| 221 | } |
| 222 | bus->mapped_device = dev; |
| 223 | } |
| 224 | |
| 225 | out: |
| 226 | return error; |
| 227 | } |
| 228 | |
| 229 | static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset) |
| 230 | { |
| 231 | struct ssb_bus *bus = dev->bus; |
| 232 | u8 val = 0xff; |
| 233 | int error = 0; |
| 234 | |
| 235 | sdio_claim_host(bus->host_sdio); |
| 236 | if (unlikely(ssb_sdio_switch_core(bus, dev))) |
| 237 | goto out; |
| 238 | offset |= bus->sdio_sbaddr & 0xffff; |
| 239 | offset &= SBSDIO_SB_OFT_ADDR_MASK; |
| 240 | val = sdio_readb(bus->host_sdio, offset, &error); |
| 241 | if (error) { |
| 242 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n", |
| 243 | bus->sdio_sbaddr >> 16, offset, val, error); |
| 244 | } |
| 245 | out: |
| 246 | sdio_release_host(bus->host_sdio); |
| 247 | |
| 248 | return val; |
| 249 | } |
| 250 | |
| 251 | static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset) |
| 252 | { |
| 253 | struct ssb_bus *bus = dev->bus; |
| 254 | u16 val = 0xffff; |
| 255 | int error = 0; |
| 256 | |
| 257 | sdio_claim_host(bus->host_sdio); |
| 258 | if (unlikely(ssb_sdio_switch_core(bus, dev))) |
| 259 | goto out; |
| 260 | offset |= bus->sdio_sbaddr & 0xffff; |
| 261 | offset &= SBSDIO_SB_OFT_ADDR_MASK; |
| 262 | val = sdio_readw(bus->host_sdio, offset, &error); |
| 263 | if (error) { |
| 264 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n", |
| 265 | bus->sdio_sbaddr >> 16, offset, val, error); |
| 266 | } |
| 267 | out: |
| 268 | sdio_release_host(bus->host_sdio); |
| 269 | |
| 270 | return val; |
| 271 | } |
| 272 | |
| 273 | static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset) |
| 274 | { |
| 275 | struct ssb_bus *bus = dev->bus; |
| 276 | u32 val = 0xffffffff; |
| 277 | int error = 0; |
| 278 | |
| 279 | sdio_claim_host(bus->host_sdio); |
| 280 | if (unlikely(ssb_sdio_switch_core(bus, dev))) |
| 281 | goto out; |
| 282 | offset |= bus->sdio_sbaddr & 0xffff; |
| 283 | offset &= SBSDIO_SB_OFT_ADDR_MASK; |
| 284 | offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ |
| 285 | val = sdio_readl(bus->host_sdio, offset, &error); |
| 286 | if (error) { |
| 287 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n", |
| 288 | bus->sdio_sbaddr >> 16, offset, val, error); |
| 289 | } |
| 290 | out: |
| 291 | sdio_release_host(bus->host_sdio); |
| 292 | |
| 293 | return val; |
| 294 | } |
| 295 | |
| 296 | #ifdef CONFIG_SSB_BLOCKIO |
| 297 | static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer, |
| 298 | size_t count, u16 offset, u8 reg_width) |
| 299 | { |
| 300 | size_t saved_count = count; |
| 301 | struct ssb_bus *bus = dev->bus; |
| 302 | int error = 0; |
| 303 | |
| 304 | sdio_claim_host(bus->host_sdio); |
| 305 | if (unlikely(ssb_sdio_switch_core(bus, dev))) { |
| 306 | error = -EIO; |
| 307 | memset(buffer, 0xff, count); |
| 308 | goto err_out; |
| 309 | } |
| 310 | offset |= bus->sdio_sbaddr & 0xffff; |
| 311 | offset &= SBSDIO_SB_OFT_ADDR_MASK; |
| 312 | |
| 313 | switch (reg_width) { |
| 314 | case sizeof(u8): { |
| 315 | error = sdio_readsb(bus->host_sdio, buffer, offset, count); |
| 316 | break; |
| 317 | } |
| 318 | case sizeof(u16): { |
| 319 | SSB_WARN_ON(count & 1); |
| 320 | error = sdio_readsb(bus->host_sdio, buffer, offset, count); |
| 321 | break; |
| 322 | } |
| 323 | case sizeof(u32): { |
| 324 | SSB_WARN_ON(count & 3); |
| 325 | offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ |
| 326 | error = sdio_readsb(bus->host_sdio, buffer, offset, count); |
| 327 | break; |
| 328 | } |
| 329 | default: |
| 330 | SSB_WARN_ON(1); |
| 331 | } |
| 332 | if (!error) |
| 333 | goto out; |
| 334 | |
| 335 | err_out: |
Randy Dunlap | de32cce | 2009-09-15 14:52:40 -0700 | [diff] [blame] | 336 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n", |
Albert Herranz | 24ea602 | 2009-09-08 19:30:12 +0200 | [diff] [blame] | 337 | bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error); |
| 338 | out: |
| 339 | sdio_release_host(bus->host_sdio); |
| 340 | } |
| 341 | #endif /* CONFIG_SSB_BLOCKIO */ |
| 342 | |
| 343 | static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val) |
| 344 | { |
| 345 | struct ssb_bus *bus = dev->bus; |
| 346 | int error = 0; |
| 347 | |
| 348 | sdio_claim_host(bus->host_sdio); |
| 349 | if (unlikely(ssb_sdio_switch_core(bus, dev))) |
| 350 | goto out; |
| 351 | offset |= bus->sdio_sbaddr & 0xffff; |
| 352 | offset &= SBSDIO_SB_OFT_ADDR_MASK; |
| 353 | sdio_writeb(bus->host_sdio, val, offset, &error); |
| 354 | if (error) { |
| 355 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n", |
| 356 | bus->sdio_sbaddr >> 16, offset, val, error); |
| 357 | } |
| 358 | out: |
| 359 | sdio_release_host(bus->host_sdio); |
| 360 | } |
| 361 | |
| 362 | static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val) |
| 363 | { |
| 364 | struct ssb_bus *bus = dev->bus; |
| 365 | int error = 0; |
| 366 | |
| 367 | sdio_claim_host(bus->host_sdio); |
| 368 | if (unlikely(ssb_sdio_switch_core(bus, dev))) |
| 369 | goto out; |
| 370 | offset |= bus->sdio_sbaddr & 0xffff; |
| 371 | offset &= SBSDIO_SB_OFT_ADDR_MASK; |
| 372 | sdio_writew(bus->host_sdio, val, offset, &error); |
| 373 | if (error) { |
| 374 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n", |
| 375 | bus->sdio_sbaddr >> 16, offset, val, error); |
| 376 | } |
| 377 | out: |
| 378 | sdio_release_host(bus->host_sdio); |
| 379 | } |
| 380 | |
| 381 | static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val) |
| 382 | { |
| 383 | struct ssb_bus *bus = dev->bus; |
| 384 | int error = 0; |
| 385 | |
| 386 | sdio_claim_host(bus->host_sdio); |
| 387 | if (unlikely(ssb_sdio_switch_core(bus, dev))) |
| 388 | goto out; |
| 389 | offset |= bus->sdio_sbaddr & 0xffff; |
| 390 | offset &= SBSDIO_SB_OFT_ADDR_MASK; |
| 391 | offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ |
| 392 | sdio_writel(bus->host_sdio, val, offset, &error); |
| 393 | if (error) { |
| 394 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n", |
| 395 | bus->sdio_sbaddr >> 16, offset, val, error); |
| 396 | } |
| 397 | if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32) |
| 398 | sdio_readl(bus->host_sdio, 0, &error); |
| 399 | out: |
| 400 | sdio_release_host(bus->host_sdio); |
| 401 | } |
| 402 | |
| 403 | #ifdef CONFIG_SSB_BLOCKIO |
| 404 | static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer, |
| 405 | size_t count, u16 offset, u8 reg_width) |
| 406 | { |
| 407 | size_t saved_count = count; |
| 408 | struct ssb_bus *bus = dev->bus; |
| 409 | int error = 0; |
| 410 | |
| 411 | sdio_claim_host(bus->host_sdio); |
| 412 | if (unlikely(ssb_sdio_switch_core(bus, dev))) { |
| 413 | error = -EIO; |
| 414 | memset((void *)buffer, 0xff, count); |
| 415 | goto err_out; |
| 416 | } |
| 417 | offset |= bus->sdio_sbaddr & 0xffff; |
| 418 | offset &= SBSDIO_SB_OFT_ADDR_MASK; |
| 419 | |
| 420 | switch (reg_width) { |
| 421 | case sizeof(u8): |
| 422 | error = sdio_writesb(bus->host_sdio, offset, |
| 423 | (void *)buffer, count); |
| 424 | break; |
| 425 | case sizeof(u16): |
| 426 | SSB_WARN_ON(count & 1); |
| 427 | error = sdio_writesb(bus->host_sdio, offset, |
| 428 | (void *)buffer, count); |
| 429 | break; |
| 430 | case sizeof(u32): |
| 431 | SSB_WARN_ON(count & 3); |
| 432 | offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ |
| 433 | error = sdio_writesb(bus->host_sdio, offset, |
| 434 | (void *)buffer, count); |
| 435 | break; |
| 436 | default: |
| 437 | SSB_WARN_ON(1); |
| 438 | } |
| 439 | if (!error) |
| 440 | goto out; |
| 441 | |
| 442 | err_out: |
Randy Dunlap | de32cce | 2009-09-15 14:52:40 -0700 | [diff] [blame] | 443 | dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n", |
Albert Herranz | 24ea602 | 2009-09-08 19:30:12 +0200 | [diff] [blame] | 444 | bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error); |
| 445 | out: |
| 446 | sdio_release_host(bus->host_sdio); |
| 447 | } |
| 448 | |
| 449 | #endif /* CONFIG_SSB_BLOCKIO */ |
| 450 | |
| 451 | /* Not "static", as it's used in main.c */ |
| 452 | const struct ssb_bus_ops ssb_sdio_ops = { |
| 453 | .read8 = ssb_sdio_read8, |
| 454 | .read16 = ssb_sdio_read16, |
| 455 | .read32 = ssb_sdio_read32, |
| 456 | .write8 = ssb_sdio_write8, |
| 457 | .write16 = ssb_sdio_write16, |
| 458 | .write32 = ssb_sdio_write32, |
| 459 | #ifdef CONFIG_SSB_BLOCKIO |
| 460 | .block_read = ssb_sdio_block_read, |
| 461 | .block_write = ssb_sdio_block_write, |
| 462 | #endif |
| 463 | }; |
| 464 | |
| 465 | #define GOTO_ERROR_ON(condition, description) do { \ |
| 466 | if (unlikely(condition)) { \ |
| 467 | error_description = description; \ |
| 468 | goto error; \ |
| 469 | } \ |
| 470 | } while (0) |
| 471 | |
| 472 | int ssb_sdio_get_invariants(struct ssb_bus *bus, |
| 473 | struct ssb_init_invariants *iv) |
| 474 | { |
| 475 | struct ssb_sprom *sprom = &iv->sprom; |
| 476 | struct ssb_boardinfo *bi = &iv->boardinfo; |
| 477 | const char *error_description = "none"; |
| 478 | struct sdio_func_tuple *tuple; |
| 479 | void *mac; |
| 480 | |
| 481 | memset(sprom, 0xFF, sizeof(*sprom)); |
| 482 | sprom->boardflags_lo = 0; |
| 483 | sprom->boardflags_hi = 0; |
| 484 | |
| 485 | tuple = bus->host_sdio->tuples; |
| 486 | while (tuple) { |
| 487 | switch (tuple->code) { |
| 488 | case 0x22: /* extended function */ |
| 489 | switch (tuple->data[0]) { |
| 490 | case CISTPL_FUNCE_LAN_NODE_ID: |
| 491 | GOTO_ERROR_ON((tuple->size != 7) && |
| 492 | (tuple->data[1] != 6), |
| 493 | "mac tpl size"); |
| 494 | /* fetch the MAC address. */ |
| 495 | mac = tuple->data + 2; |
| 496 | memcpy(sprom->il0mac, mac, ETH_ALEN); |
| 497 | memcpy(sprom->et1mac, mac, ETH_ALEN); |
| 498 | break; |
| 499 | default: |
| 500 | break; |
| 501 | } |
| 502 | break; |
| 503 | case 0x80: /* vendor specific tuple */ |
| 504 | switch (tuple->data[0]) { |
| 505 | case SSB_SDIO_CIS_SROMREV: |
| 506 | GOTO_ERROR_ON(tuple->size != 2, |
| 507 | "sromrev tpl size"); |
| 508 | sprom->revision = tuple->data[1]; |
| 509 | break; |
| 510 | case SSB_SDIO_CIS_ID: |
| 511 | GOTO_ERROR_ON((tuple->size != 5) && |
| 512 | (tuple->size != 7), |
| 513 | "id tpl size"); |
| 514 | bi->vendor = tuple->data[1] | |
| 515 | (tuple->data[2]<<8); |
| 516 | break; |
| 517 | case SSB_SDIO_CIS_BOARDREV: |
| 518 | GOTO_ERROR_ON(tuple->size != 2, |
| 519 | "boardrev tpl size"); |
| 520 | sprom->board_rev = tuple->data[1]; |
| 521 | break; |
| 522 | case SSB_SDIO_CIS_PA: |
| 523 | GOTO_ERROR_ON((tuple->size != 9) && |
| 524 | (tuple->size != 10), |
| 525 | "pa tpl size"); |
| 526 | sprom->pa0b0 = tuple->data[1] | |
| 527 | ((u16)tuple->data[2] << 8); |
| 528 | sprom->pa0b1 = tuple->data[3] | |
| 529 | ((u16)tuple->data[4] << 8); |
| 530 | sprom->pa0b2 = tuple->data[5] | |
| 531 | ((u16)tuple->data[6] << 8); |
| 532 | sprom->itssi_a = tuple->data[7]; |
| 533 | sprom->itssi_bg = tuple->data[7]; |
| 534 | sprom->maxpwr_a = tuple->data[8]; |
| 535 | sprom->maxpwr_bg = tuple->data[8]; |
| 536 | break; |
| 537 | case SSB_SDIO_CIS_OEMNAME: |
| 538 | /* Not present */ |
| 539 | break; |
| 540 | case SSB_SDIO_CIS_CCODE: |
| 541 | GOTO_ERROR_ON(tuple->size != 2, |
| 542 | "ccode tpl size"); |
| 543 | sprom->country_code = tuple->data[1]; |
| 544 | break; |
| 545 | case SSB_SDIO_CIS_ANTENNA: |
| 546 | GOTO_ERROR_ON(tuple->size != 2, |
| 547 | "ant tpl size"); |
| 548 | sprom->ant_available_a = tuple->data[1]; |
| 549 | sprom->ant_available_bg = tuple->data[1]; |
| 550 | break; |
| 551 | case SSB_SDIO_CIS_ANTGAIN: |
| 552 | GOTO_ERROR_ON(tuple->size != 2, |
| 553 | "antg tpl size"); |
| 554 | sprom->antenna_gain.ghz24.a0 = tuple->data[1]; |
| 555 | sprom->antenna_gain.ghz24.a1 = tuple->data[1]; |
| 556 | sprom->antenna_gain.ghz24.a2 = tuple->data[1]; |
| 557 | sprom->antenna_gain.ghz24.a3 = tuple->data[1]; |
| 558 | sprom->antenna_gain.ghz5.a0 = tuple->data[1]; |
| 559 | sprom->antenna_gain.ghz5.a1 = tuple->data[1]; |
| 560 | sprom->antenna_gain.ghz5.a2 = tuple->data[1]; |
| 561 | sprom->antenna_gain.ghz5.a3 = tuple->data[1]; |
| 562 | break; |
| 563 | case SSB_SDIO_CIS_BFLAGS: |
| 564 | GOTO_ERROR_ON((tuple->size != 3) && |
| 565 | (tuple->size != 5), |
| 566 | "bfl tpl size"); |
| 567 | sprom->boardflags_lo = tuple->data[1] | |
| 568 | ((u16)tuple->data[2] << 8); |
| 569 | break; |
| 570 | case SSB_SDIO_CIS_LEDS: |
| 571 | GOTO_ERROR_ON(tuple->size != 5, |
| 572 | "leds tpl size"); |
| 573 | sprom->gpio0 = tuple->data[1]; |
| 574 | sprom->gpio1 = tuple->data[2]; |
| 575 | sprom->gpio2 = tuple->data[3]; |
| 576 | sprom->gpio3 = tuple->data[4]; |
| 577 | break; |
| 578 | default: |
| 579 | break; |
| 580 | } |
| 581 | break; |
| 582 | default: |
| 583 | break; |
| 584 | } |
| 585 | tuple = tuple->next; |
| 586 | } |
| 587 | |
| 588 | return 0; |
| 589 | error: |
| 590 | dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n", |
| 591 | error_description); |
| 592 | return -ENODEV; |
| 593 | } |
| 594 | |
| 595 | void ssb_sdio_exit(struct ssb_bus *bus) |
| 596 | { |
| 597 | if (bus->bustype != SSB_BUSTYPE_SDIO) |
| 598 | return; |
| 599 | /* Nothing to do here. */ |
| 600 | } |
| 601 | |
| 602 | int ssb_sdio_init(struct ssb_bus *bus) |
| 603 | { |
| 604 | if (bus->bustype != SSB_BUSTYPE_SDIO) |
| 605 | return 0; |
| 606 | |
| 607 | bus->sdio_sbaddr = ~0; |
| 608 | |
| 609 | return 0; |
| 610 | } |