blob: b714183d412515abc2a39c32e898cdab52d21eff [file] [log] [blame]
Miguel Ojeda Sandonis70e84042007-02-10 01:44:32 -08001 ===================================
2 cfag12864b LCD Driver Documentation
3 ===================================
4
5License: GPLv2
6Author & Maintainer: Miguel Ojeda Sandonis <maxextreme@gmail.com>
7Date: 2006-10-27
8
9
10
11--------
120. INDEX
13--------
14
15 1. DRIVER INFORMATION
16 2. DEVICE INFORMATION
17 3. WIRING
18 4. USERSPACE PROGRAMMING
19
20
21---------------------
221. DRIVER INFORMATION
23---------------------
24
25This driver support one cfag12864b display at time.
26
27
28---------------------
292. DEVICE INFORMATION
30---------------------
31
32Manufacturer: Crystalfontz
33Device Name: Crystalfontz 12864b LCD Series
34Device Code: cfag12864b
35Webpage: http://www.crystalfontz.com
36Device Webpage: http://www.crystalfontz.com/products/12864b/
37Type: LCD (Liquid Crystal Display)
38Width: 128
39Height: 64
40Colors: 2 (B/N)
41Controller: ks0108
42Controllers: 2
43Pages: 8 each controller
44Addresses: 64 each page
45Data size: 1 byte each address
46Memory size: 2 * 8 * 64 * 1 = 1024 bytes = 1 Kbyte
47
48
49---------
503. WIRING
51---------
52
53The cfag12864b LCD Series don't have official wiring.
54
55The common wiring is done to the parallel port as shown:
56
57Parallel Port cfag12864b
58
59 Name Pin# Pin# Name
60
61Strobe ( 1)------------------------------(17) Enable
62Data 0 ( 2)------------------------------( 4) Data 0
63Data 1 ( 3)------------------------------( 5) Data 1
64Data 2 ( 4)------------------------------( 6) Data 2
65Data 3 ( 5)------------------------------( 7) Data 3
66Data 4 ( 6)------------------------------( 8) Data 4
67Data 5 ( 7)------------------------------( 9) Data 5
68Data 6 ( 8)------------------------------(10) Data 6
69Data 7 ( 9)------------------------------(11) Data 7
70 (10) [+5v]---( 1) Vdd
71 (11) [GND]---( 2) Ground
72 (12) [+5v]---(14) Reset
73 (13) [GND]---(15) Read / Write
74 Line (14)------------------------------(13) Controller Select 1
75 (15)
76 Init (16)------------------------------(12) Controller Select 2
77Select (17)------------------------------(16) Data / Instruction
78Ground (18)---[GND] [+5v]---(19) LED +
79Ground (19)---[GND]
80Ground (20)---[GND] E A Values:
John Anthony Kazos Jrbe2a6082007-05-09 08:50:42 +020081Ground (21)---[GND] [GND]---[P1]---(18) Vee - R = Resistor = 22 ohm
82Ground (22)---[GND] | - P1 = Preset = 10 Kohm
83Ground (23)---[GND] ---- S ------( 3) V0 - P2 = Preset = 1 Kohm
Miguel Ojeda Sandonis70e84042007-02-10 01:44:32 -080084Ground (24)---[GND] | |
85Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED -
86
87
88------------------------
894. USERSPACE PROGRAMMING
90------------------------
91
92The cfag12864bfb describes a framebuffer device (/dev/fbX).
93
94It has a size of 1024 bytes = 1 Kbyte.
95Each bit represents one pixel. If the bit is high, the pixel will
96turn on. If the pixel is low, the pixel will turn off.
97
98You can use the framebuffer as a file: fopen, fwrite, fclose...
99Although the LCD won't get updated until the next refresh time arrives.
100
101Also, you can mmap the framebuffer: open & mmap, munmap & close...
102which is the best option for most uses.
103
104Check Documentation/auxdisplay/cfag12864b-example.c
105for a real working userspace complete program with usage examples.