Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * ASCII values for a number of symbolic constants, printing functions, |
| 3 | * etc. |
| 4 | * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422) |
| 5 | * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002) |
| 6 | * by D. Gilbert and aeb (20020609) |
| 7 | * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025 |
| 8 | */ |
| 9 | |
| 10 | #include <linux/config.h> |
| 11 | #include <linux/blkdev.h> |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/kernel.h> |
| 14 | |
| 15 | #include <scsi/scsi.h> |
Christoph Hellwig | beb4048 | 2006-06-10 18:01:03 +0200 | [diff] [blame^] | 16 | #include <scsi/scsi_cmnd.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 17 | #include <scsi/scsi_device.h> |
| 18 | #include <scsi/scsi_host.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 19 | #include <scsi/scsi_eh.h> |
Adrian Bunk | de540a5 | 2005-08-20 21:27:27 +0200 | [diff] [blame] | 20 | #include <scsi/scsi_dbg.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 21 | |
| 22 | |
| 23 | |
| 24 | /* Commands with service actions that change the command name */ |
| 25 | #define MAINTENANCE_IN 0xa3 |
| 26 | #define MAINTENANCE_OUT 0xa4 |
| 27 | #define SERVICE_ACTION_IN_12 0xab |
| 28 | #define SERVICE_ACTION_OUT_12 0xa9 |
| 29 | #define SERVICE_ACTION_IN_16 0x9e |
| 30 | #define SERVICE_ACTION_OUT_16 0x9f |
| 31 | #define VARIABLE_LENGTH_CMD 0x7f |
| 32 | |
| 33 | |
| 34 | |
| 35 | #ifdef CONFIG_SCSI_CONSTANTS |
| 36 | static const char * cdb_byte0_names[] = { |
| 37 | /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", |
| 38 | /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, |
| 39 | "Reasssign Blocks", |
| 40 | /* 08-0d */ "Read (6)", NULL, "Write (6)", "Seek (6)", NULL, NULL, |
| 41 | /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", |
| 42 | /* 13-16 */ "Verify (6)", "Recover Buffered Data", "Mode Select (6)", |
| 43 | "Reserve (6)", |
| 44 | /* 17-1a */ "Release (6)", "Copy", "Erase", "Mode Sense (6)", |
| 45 | /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", |
| 46 | /* 1e-1f */ "Prevent/Allow Medium Removal", NULL, |
| 47 | /* 20-22 */ NULL, NULL, NULL, |
| 48 | /* 23-28 */ "Read Format Capacities", "Set Window", |
| 49 | "Read Capacity (10)", NULL, NULL, "Read (10)", |
| 50 | /* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase (10)", |
| 51 | "Read updated block", |
| 52 | /* 2e-31 */ "Write Verify (10)", "Verify (10)", "Search High", "Search Equal", |
| 53 | /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", |
| 54 | /* 35-37 */ "Synchronize Cache (10)", "Lock/Unlock Cache (10)", |
| 55 | "Read Defect Data(10)", |
| 56 | /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", |
| 57 | "Read Buffer", |
| 58 | /* 3d-3f */ "Update Block", "Read Long (10)", "Write Long (10)", |
| 59 | /* 40-41 */ "Change Definition", "Write Same (10)", |
| 60 | /* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support", |
| 61 | "Play audio (10)", "Get configuration", "Play audio msf", |
| 62 | "Play audio track/index", |
| 63 | /* 49-4f */ "Play track relative (10)", "Get event status notification", |
| 64 | "Pause/resume", "Log Select", "Log Sense", "Stop play/scan", |
| 65 | NULL, |
| 66 | /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info", |
| 67 | "Reserve track", "Send OPC info", "Mode Select (10)", |
| 68 | /* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue", |
| 69 | "Mode Sense (10)", "Close track/session", |
| 70 | /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in", |
| 71 | "Persistent reserve out", |
| 72 | /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, |
| 73 | /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, |
| 74 | /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, |
| 75 | /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length", |
| 76 | /* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy", |
| 77 | "Receive copy results", |
| 78 | /* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out", |
| 79 | "Read (16)", "Memory Export Out (16)", |
| 80 | /* 8a-8f */ "Write (16)", NULL, "Read attributes", "Write attributes", |
| 81 | "Write and verify (16)", "Verify (16)", |
| 82 | /* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)", |
| 83 | "Lock/unlock cache (16)", "Write same (16)", NULL, |
| 84 | /* 95-99 */ NULL, NULL, NULL, NULL, NULL, |
| 85 | /* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in (16)", |
| 86 | "Service action out (16)", |
| 87 | /* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance in", |
| 88 | "Maintenance out", "Move medium/play audio(12)", |
| 89 | /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)", |
| 90 | "Play track relative(12)", |
| 91 | /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance", |
| 92 | "Read DVD structure", "Write and verify(12)", |
| 93 | /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", |
| 94 | /* b2-b4 */ "Search data low(12)", "Set limits(12)", |
| 95 | "Read element status attached", |
| 96 | /* b5-b6 */ "Request volume element address", "Send volume tag, set streaming", |
| 97 | /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf", |
| 98 | /* ba-bc */ "Redundancy group (in), Scan", |
| 99 | "Redundancy group (out), Set cd-rom speed", "Spare in, Play cd", |
| 100 | /* bd-bf */ "Spare out, Mechanism status", "Volume set in, Read cd", |
| 101 | "Volume set out, Send DVD structure", |
| 102 | }; |
| 103 | |
| 104 | struct value_name_pair { |
| 105 | int value; |
| 106 | const char * name; |
| 107 | }; |
| 108 | |
| 109 | static const struct value_name_pair maint_in_arr[] = { |
| 110 | {0x5, "Report device identifier"}, |
| 111 | {0xa, "Report target port groups"}, |
| 112 | {0xb, "Report aliases"}, |
| 113 | {0xc, "Report supported operation codes"}, |
| 114 | {0xd, "Report supported task management functions"}, |
| 115 | {0xe, "Report priority"}, |
| 116 | }; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 117 | #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 118 | |
| 119 | static const struct value_name_pair maint_out_arr[] = { |
| 120 | {0x6, "Set device identifier"}, |
| 121 | {0xa, "Set target port groups"}, |
| 122 | {0xb, "Change aliases"}, |
| 123 | {0xe, "Set priority"}, |
| 124 | }; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 125 | #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 126 | |
| 127 | static const struct value_name_pair serv_in12_arr[] = { |
| 128 | {0x1, "Read media serial number"}, |
| 129 | }; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 130 | #define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 131 | |
| 132 | static const struct value_name_pair serv_out12_arr[] = { |
| 133 | {-1, "dummy entry"}, |
| 134 | }; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 135 | #define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 136 | |
| 137 | static const struct value_name_pair serv_in16_arr[] = { |
| 138 | {0x10, "Read capacity(16)"}, |
| 139 | {0x11, "Read long(16)"}, |
| 140 | }; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 141 | #define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 142 | |
| 143 | static const struct value_name_pair serv_out16_arr[] = { |
| 144 | {0x11, "Write long(16)"}, |
| 145 | {0x1f, "Notify data transfer device(16)"}, |
| 146 | }; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 147 | #define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 148 | |
| 149 | static const struct value_name_pair variable_length_arr[] = { |
| 150 | {0x1, "Rebuild(32)"}, |
| 151 | {0x2, "Regenerate(32)"}, |
| 152 | {0x3, "Xdread(32)"}, |
| 153 | {0x4, "Xdwrite(32)"}, |
| 154 | {0x5, "Xdwrite extended(32)"}, |
| 155 | {0x6, "Xpwrite(32)"}, |
| 156 | {0x7, "Xdwriteread(32)"}, |
| 157 | {0x8, "Xdwrite extended(64)"}, |
| 158 | {0x9, "Read(32)"}, |
| 159 | {0xa, "Verify(32)"}, |
| 160 | {0xb, "Write(32)"}, |
| 161 | {0xc, "Write an verify(32)"}, |
| 162 | {0xd, "Write same(32)"}, |
| 163 | {0x8801, "Format OSD"}, |
| 164 | {0x8802, "Create (osd)"}, |
| 165 | {0x8803, "List (osd)"}, |
| 166 | {0x8805, "Read (osd)"}, |
| 167 | {0x8806, "Write (osd)"}, |
| 168 | {0x8807, "Append (osd)"}, |
| 169 | {0x8808, "Flush (osd)"}, |
| 170 | {0x880a, "Remove (osd)"}, |
| 171 | {0x880b, "Create partition (osd)"}, |
| 172 | {0x880c, "Remove partition (osd)"}, |
| 173 | {0x880e, "Get attributes (osd)"}, |
| 174 | {0x880f, "Set attributes (osd)"}, |
| 175 | {0x8812, "Create and write (osd)"}, |
| 176 | {0x8815, "Create collection (osd)"}, |
| 177 | {0x8816, "Remove collection (osd)"}, |
| 178 | {0x8817, "List collection (osd)"}, |
| 179 | {0x8818, "Set key (osd)"}, |
| 180 | {0x8819, "Set master key (osd)"}, |
| 181 | {0x881a, "Flush collection (osd)"}, |
| 182 | {0x881b, "Flush partition (osd)"}, |
| 183 | {0x881c, "Flush OSD"}, |
| 184 | {0x8f7e, "Perform SCSI command (osd)"}, |
| 185 | {0x8f7f, "Perform task management function (osd)"}, |
| 186 | }; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 187 | #define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 188 | |
| 189 | static const char * get_sa_name(const struct value_name_pair * arr, |
| 190 | int arr_sz, int service_action) |
| 191 | { |
| 192 | int k; |
| 193 | |
| 194 | for (k = 0; k < arr_sz; ++k, ++arr) { |
| 195 | if (service_action == arr->value) |
| 196 | break; |
| 197 | } |
| 198 | return (k < arr_sz) ? arr->name : NULL; |
| 199 | } |
| 200 | |
| 201 | /* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */ |
| 202 | static void print_opcode_name(unsigned char * cdbp, int cdb_len, |
| 203 | int start_of_line) |
| 204 | { |
| 205 | int sa, len, cdb0; |
| 206 | const char * name; |
| 207 | const char * leadin = start_of_line ? KERN_INFO : ""; |
| 208 | |
| 209 | cdb0 = cdbp[0]; |
| 210 | switch(cdb0) { |
| 211 | case VARIABLE_LENGTH_CMD: |
| 212 | len = cdbp[7] + 8; |
| 213 | if (len < 10) { |
| 214 | printk("%sshort variable length command, " |
| 215 | "len=%d ext_len=%d", leadin, len, cdb_len); |
| 216 | break; |
| 217 | } |
| 218 | sa = (cdbp[8] << 8) + cdbp[9]; |
| 219 | name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa); |
| 220 | if (name) { |
| 221 | printk("%s%s", leadin, name); |
| 222 | if ((cdb_len > 0) && (len != cdb_len)) |
| 223 | printk(", in_cdb_len=%d, ext_len=%d", |
| 224 | len, cdb_len); |
| 225 | } else { |
| 226 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 227 | if ((cdb_len > 0) && (len != cdb_len)) |
| 228 | printk(", in_cdb_len=%d, ext_len=%d", |
| 229 | len, cdb_len); |
| 230 | } |
| 231 | break; |
| 232 | case MAINTENANCE_IN: |
| 233 | sa = cdbp[1] & 0x1f; |
| 234 | name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa); |
| 235 | if (name) |
| 236 | printk("%s%s", leadin, name); |
| 237 | else |
| 238 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 239 | break; |
| 240 | case MAINTENANCE_OUT: |
| 241 | sa = cdbp[1] & 0x1f; |
| 242 | name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa); |
| 243 | if (name) |
| 244 | printk("%s%s", leadin, name); |
| 245 | else |
| 246 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 247 | break; |
| 248 | case SERVICE_ACTION_IN_12: |
| 249 | sa = cdbp[1] & 0x1f; |
| 250 | name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa); |
| 251 | if (name) |
| 252 | printk("%s%s", leadin, name); |
| 253 | else |
| 254 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 255 | break; |
| 256 | case SERVICE_ACTION_OUT_12: |
| 257 | sa = cdbp[1] & 0x1f; |
| 258 | name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa); |
| 259 | if (name) |
| 260 | printk("%s%s", leadin, name); |
| 261 | else |
| 262 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 263 | break; |
| 264 | case SERVICE_ACTION_IN_16: |
| 265 | sa = cdbp[1] & 0x1f; |
| 266 | name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa); |
| 267 | if (name) |
| 268 | printk("%s%s", leadin, name); |
| 269 | else |
| 270 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 271 | break; |
| 272 | case SERVICE_ACTION_OUT_16: |
| 273 | sa = cdbp[1] & 0x1f; |
| 274 | name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa); |
| 275 | if (name) |
| 276 | printk("%s%s", leadin, name); |
| 277 | else |
| 278 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 279 | break; |
| 280 | default: |
| 281 | if (cdb0 < 0xc0) { |
| 282 | name = cdb_byte0_names[cdb0]; |
| 283 | if (name) |
| 284 | printk("%s%s", leadin, name); |
| 285 | else |
| 286 | printk("%scdb[0]=0x%x (reserved)", |
| 287 | leadin, cdb0); |
| 288 | } else |
| 289 | printk("%scdb[0]=0x%x (vendor)", leadin, cdb0); |
| 290 | break; |
| 291 | } |
| 292 | } |
| 293 | |
| 294 | #else /* ifndef CONFIG_SCSI_CONSTANTS */ |
| 295 | |
| 296 | static void print_opcode_name(unsigned char * cdbp, int cdb_len, |
| 297 | int start_of_line) |
| 298 | { |
| 299 | int sa, len, cdb0; |
| 300 | const char * leadin = start_of_line ? KERN_INFO : ""; |
| 301 | |
| 302 | cdb0 = cdbp[0]; |
| 303 | switch(cdb0) { |
| 304 | case VARIABLE_LENGTH_CMD: |
| 305 | len = cdbp[7] + 8; |
| 306 | if (len < 10) { |
| 307 | printk("%sshort opcode=0x%x command, len=%d " |
| 308 | "ext_len=%d", leadin, cdb0, len, cdb_len); |
| 309 | break; |
| 310 | } |
| 311 | sa = (cdbp[8] << 8) + cdbp[9]; |
| 312 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 313 | if (len != cdb_len) |
| 314 | printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len); |
| 315 | break; |
| 316 | case MAINTENANCE_IN: |
| 317 | case MAINTENANCE_OUT: |
| 318 | case SERVICE_ACTION_IN_12: |
| 319 | case SERVICE_ACTION_OUT_12: |
| 320 | case SERVICE_ACTION_IN_16: |
| 321 | case SERVICE_ACTION_OUT_16: |
| 322 | sa = cdbp[1] & 0x1f; |
| 323 | printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa); |
| 324 | break; |
| 325 | default: |
| 326 | if (cdb0 < 0xc0) |
| 327 | printk("%scdb[0]=0x%x", leadin, cdb0); |
| 328 | else |
| 329 | printk("%scdb[0]=0x%x (vendor)", leadin, cdb0); |
| 330 | break; |
| 331 | } |
| 332 | } |
| 333 | #endif |
| 334 | |
| 335 | void __scsi_print_command(unsigned char *command) |
| 336 | { |
| 337 | int k, len; |
| 338 | |
| 339 | print_opcode_name(command, 0, 1); |
| 340 | if (VARIABLE_LENGTH_CMD == command[0]) |
| 341 | len = command[7] + 8; |
| 342 | else |
| 343 | len = COMMAND_SIZE(command[0]); |
| 344 | /* print out all bytes in cdb */ |
| 345 | for (k = 0; k < len; ++k) |
| 346 | printk(" %02x", command[k]); |
| 347 | printk("\n"); |
| 348 | } |
| 349 | EXPORT_SYMBOL(__scsi_print_command); |
| 350 | |
| 351 | /* This function (perhaps with the addition of peripheral device type) |
| 352 | * is more approriate than __scsi_print_command(). Perhaps that static |
| 353 | * can be dropped later if it replaces the __scsi_print_command version. |
| 354 | */ |
| 355 | static void scsi_print_cdb(unsigned char *cdb, int cdb_len, int start_of_line) |
| 356 | { |
| 357 | int k; |
| 358 | |
| 359 | print_opcode_name(cdb, cdb_len, start_of_line); |
| 360 | /* print out all bytes in cdb */ |
| 361 | printk(":"); |
| 362 | for (k = 0; k < cdb_len; ++k) |
| 363 | printk(" %02x", cdb[k]); |
| 364 | printk("\n"); |
| 365 | } |
| 366 | |
| 367 | /** |
| 368 | * |
| db9dff3 | 2005-04-03 14:53:59 -0500 | [diff] [blame] | 369 | * scsi_print_status - print scsi status description |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 370 | * @scsi_status: scsi status value |
| 371 | * |
| 372 | * If the status is recognized, the description is printed. |
| 373 | * Otherwise "Unknown status" is output. No trailing space. |
| 374 | * If CONFIG_SCSI_CONSTANTS is not set, then print status in hex |
| 375 | * (e.g. "0x2" for Check Condition). |
| 376 | **/ |
| 377 | void |
| 378 | scsi_print_status(unsigned char scsi_status) { |
| 379 | #ifdef CONFIG_SCSI_CONSTANTS |
| 380 | const char * ccp; |
| 381 | |
| 382 | switch (scsi_status) { |
| 383 | case 0: ccp = "Good"; break; |
| 384 | case 0x2: ccp = "Check Condition"; break; |
| 385 | case 0x4: ccp = "Condition Met"; break; |
| 386 | case 0x8: ccp = "Busy"; break; |
| 387 | case 0x10: ccp = "Intermediate"; break; |
| 388 | case 0x14: ccp = "Intermediate-Condition Met"; break; |
| 389 | case 0x18: ccp = "Reservation Conflict"; break; |
| 390 | case 0x22: ccp = "Command Terminated"; break; /* obsolete */ |
| 391 | case 0x28: ccp = "Task set Full"; break; /* was: Queue Full */ |
| 392 | case 0x30: ccp = "ACA Active"; break; |
| 393 | case 0x40: ccp = "Task Aborted"; break; |
| 394 | default: ccp = "Unknown status"; |
| 395 | } |
| 396 | printk(KERN_INFO "%s", ccp); |
| 397 | #else |
| 398 | printk(KERN_INFO "0x%0x", scsi_status); |
| 399 | #endif |
| 400 | } |
| 401 | EXPORT_SYMBOL(scsi_print_status); |
| 402 | |
| 403 | #ifdef CONFIG_SCSI_CONSTANTS |
| 404 | |
| 405 | struct error_info { |
| 406 | unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ |
| 407 | const char * text; |
| 408 | }; |
| 409 | |
| 410 | static struct error_info additional[] = |
| 411 | { |
| 412 | {0x0000, "No additional sense information"}, |
| 413 | {0x0001, "Filemark detected"}, |
| 414 | {0x0002, "End-of-partition/medium detected"}, |
| 415 | {0x0003, "Setmark detected"}, |
| 416 | {0x0004, "Beginning-of-partition/medium detected"}, |
| 417 | {0x0005, "End-of-data detected"}, |
| 418 | {0x0006, "I/O process terminated"}, |
| 419 | {0x0011, "Audio play operation in progress"}, |
| 420 | {0x0012, "Audio play operation paused"}, |
| 421 | {0x0013, "Audio play operation successfully completed"}, |
| 422 | {0x0014, "Audio play operation stopped due to error"}, |
| 423 | {0x0015, "No current audio status to return"}, |
| 424 | {0x0016, "Operation in progress"}, |
| 425 | {0x0017, "Cleaning requested"}, |
| 426 | {0x0018, "Erase operation in progress"}, |
| 427 | {0x0019, "Locate operation in progress"}, |
| 428 | {0x001A, "Rewind operation in progress"}, |
| 429 | {0x001B, "Set capacity operation in progress"}, |
| 430 | {0x001C, "Verify operation in progress"}, |
| 431 | |
| 432 | {0x0100, "No index/sector signal"}, |
| 433 | |
| 434 | {0x0200, "No seek complete"}, |
| 435 | |
| 436 | {0x0300, "Peripheral device write fault"}, |
| 437 | {0x0301, "No write current"}, |
| 438 | {0x0302, "Excessive write errors"}, |
| 439 | |
| 440 | {0x0400, "Logical unit not ready, cause not reportable"}, |
| 441 | {0x0401, "Logical unit is in process of becoming ready"}, |
| 442 | {0x0402, "Logical unit not ready, initializing cmd. required"}, |
| 443 | {0x0403, "Logical unit not ready, manual intervention required"}, |
| 444 | {0x0404, "Logical unit not ready, format in progress"}, |
| 445 | {0x0405, "Logical unit not ready, rebuild in progress"}, |
| 446 | {0x0406, "Logical unit not ready, recalculation in progress"}, |
| 447 | {0x0407, "Logical unit not ready, operation in progress"}, |
| 448 | {0x0408, "Logical unit not ready, long write in progress"}, |
| 449 | {0x0409, "Logical unit not ready, self-test in progress"}, |
| 450 | {0x040A, "Logical unit not accessible, asymmetric access state " |
| 451 | "transition"}, |
| 452 | {0x040B, "Logical unit not accessible, target port in standby state"}, |
| 453 | {0x040C, "Logical unit not accessible, target port in unavailable " |
| 454 | "state"}, |
| 455 | {0x0410, "Logical unit not ready, auxiliary memory not accessible"}, |
| 456 | {0x0411, "Logical unit not ready, notify (enable spinup) required"}, |
| 457 | {0x0412, "Logical unit not ready, offline"}, |
| 458 | |
| 459 | {0x0500, "Logical unit does not respond to selection"}, |
| 460 | |
| 461 | {0x0600, "No reference position found"}, |
| 462 | |
| 463 | {0x0700, "Multiple peripheral devices selected"}, |
| 464 | |
| 465 | {0x0800, "Logical unit communication failure"}, |
| 466 | {0x0801, "Logical unit communication time-out"}, |
| 467 | {0x0802, "Logical unit communication parity error"}, |
| 468 | {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"}, |
| 469 | {0x0804, "Unreachable copy target"}, |
| 470 | |
| 471 | {0x0900, "Track following error"}, |
| 472 | {0x0901, "Tracking servo failure"}, |
| 473 | {0x0902, "Focus servo failure"}, |
| 474 | {0x0903, "Spindle servo failure"}, |
| 475 | {0x0904, "Head select fault"}, |
| 476 | |
| 477 | {0x0A00, "Error log overflow"}, |
| 478 | |
| 479 | {0x0B00, "Warning"}, |
| 480 | {0x0B01, "Warning - specified temperature exceeded"}, |
| 481 | {0x0B02, "Warning - enclosure degraded"}, |
| 482 | |
| 483 | {0x0C00, "Write error"}, |
| 484 | {0x0C01, "Write error - recovered with auto reallocation"}, |
| 485 | {0x0C02, "Write error - auto reallocation failed"}, |
| 486 | {0x0C03, "Write error - recommend reassignment"}, |
| 487 | {0x0C04, "Compression check miscompare error"}, |
| 488 | {0x0C05, "Data expansion occurred during compression"}, |
| 489 | {0x0C06, "Block not compressible"}, |
| 490 | {0x0C07, "Write error - recovery needed"}, |
| 491 | {0x0C08, "Write error - recovery failed"}, |
| 492 | {0x0C09, "Write error - loss of streaming"}, |
| 493 | {0x0C0A, "Write error - padding blocks added"}, |
| 494 | {0x0C0B, "Auxiliary memory write error"}, |
| 495 | {0x0C0C, "Write error - unexpected unsolicited data"}, |
| 496 | {0x0C0D, "Write error - not enough unsolicited data"}, |
| 497 | |
| 498 | {0x0D00, "Error detected by third party temporary initiator"}, |
| 499 | {0x0D01, "Third party device failure"}, |
| 500 | {0x0D02, "Copy target device not reachable"}, |
| 501 | {0x0D03, "Incorrect copy target device type"}, |
| 502 | {0x0D04, "Copy target device data underrun"}, |
| 503 | {0x0D05, "Copy target device data overrun"}, |
| 504 | |
| 505 | {0x0E00, "Invalid information unit"}, |
| 506 | {0x0E01, "Information unit too short"}, |
| 507 | {0x0E02, "Information unit too long"}, |
| 508 | |
| 509 | {0x1000, "Id CRC or ECC error"}, |
| 510 | {0x1001, "Data block guard check failed"}, |
| 511 | {0x1002, "Data block application tag check failed"}, |
| 512 | {0x1003, "Data block reference tag check failed"}, |
| 513 | |
| 514 | {0x1100, "Unrecovered read error"}, |
| 515 | {0x1101, "Read retries exhausted"}, |
| 516 | {0x1102, "Error too long to correct"}, |
| 517 | {0x1103, "Multiple read errors"}, |
| 518 | {0x1104, "Unrecovered read error - auto reallocate failed"}, |
| 519 | {0x1105, "L-EC uncorrectable error"}, |
| 520 | {0x1106, "CIRC unrecovered error"}, |
| 521 | {0x1107, "Data re-synchronization error"}, |
| 522 | {0x1108, "Incomplete block read"}, |
| 523 | {0x1109, "No gap found"}, |
| 524 | {0x110A, "Miscorrected error"}, |
| 525 | {0x110B, "Unrecovered read error - recommend reassignment"}, |
| 526 | {0x110C, "Unrecovered read error - recommend rewrite the data"}, |
| 527 | {0x110D, "De-compression CRC error"}, |
| 528 | {0x110E, "Cannot decompress using declared algorithm"}, |
| 529 | {0x110F, "Error reading UPC/EAN number"}, |
| 530 | {0x1110, "Error reading ISRC number"}, |
| 531 | {0x1111, "Read error - loss of streaming"}, |
| 532 | {0x1112, "Auxiliary memory read error"}, |
| 533 | {0x1113, "Read error - failed retransmission request"}, |
| 534 | |
| 535 | {0x1200, "Address mark not found for id field"}, |
| 536 | |
| 537 | {0x1300, "Address mark not found for data field"}, |
| 538 | |
| 539 | {0x1400, "Recorded entity not found"}, |
| 540 | {0x1401, "Record not found"}, |
| 541 | {0x1402, "Filemark or setmark not found"}, |
| 542 | {0x1403, "End-of-data not found"}, |
| 543 | {0x1404, "Block sequence error"}, |
| 544 | {0x1405, "Record not found - recommend reassignment"}, |
| 545 | {0x1406, "Record not found - data auto-reallocated"}, |
| 546 | {0x1407, "Locate operation failure"}, |
| 547 | |
| 548 | {0x1500, "Random positioning error"}, |
| 549 | {0x1501, "Mechanical positioning error"}, |
| 550 | {0x1502, "Positioning error detected by read of medium"}, |
| 551 | |
| 552 | {0x1600, "Data synchronization mark error"}, |
| 553 | {0x1601, "Data sync error - data rewritten"}, |
| 554 | {0x1602, "Data sync error - recommend rewrite"}, |
| 555 | {0x1603, "Data sync error - data auto-reallocated"}, |
| 556 | {0x1604, "Data sync error - recommend reassignment"}, |
| 557 | |
| 558 | {0x1700, "Recovered data with no error correction applied"}, |
| 559 | {0x1701, "Recovered data with retries"}, |
| 560 | {0x1702, "Recovered data with positive head offset"}, |
| 561 | {0x1703, "Recovered data with negative head offset"}, |
| 562 | {0x1704, "Recovered data with retries and/or circ applied"}, |
| 563 | {0x1705, "Recovered data using previous sector id"}, |
| 564 | {0x1706, "Recovered data without ECC - data auto-reallocated"}, |
| 565 | {0x1707, "Recovered data without ECC - recommend reassignment"}, |
| 566 | {0x1708, "Recovered data without ECC - recommend rewrite"}, |
| 567 | {0x1709, "Recovered data without ECC - data rewritten"}, |
| 568 | |
| 569 | {0x1800, "Recovered data with error correction applied"}, |
| 570 | {0x1801, "Recovered data with error corr. & retries applied"}, |
| 571 | {0x1802, "Recovered data - data auto-reallocated"}, |
| 572 | {0x1803, "Recovered data with CIRC"}, |
| 573 | {0x1804, "Recovered data with L-EC"}, |
| 574 | {0x1805, "Recovered data - recommend reassignment"}, |
| 575 | {0x1806, "Recovered data - recommend rewrite"}, |
| 576 | {0x1807, "Recovered data with ECC - data rewritten"}, |
| 577 | {0x1808, "Recovered data with linking"}, |
| 578 | |
| 579 | {0x1900, "Defect list error"}, |
| 580 | {0x1901, "Defect list not available"}, |
| 581 | {0x1902, "Defect list error in primary list"}, |
| 582 | {0x1903, "Defect list error in grown list"}, |
| 583 | |
| 584 | {0x1A00, "Parameter list length error"}, |
| 585 | |
| 586 | {0x1B00, "Synchronous data transfer error"}, |
| 587 | |
| 588 | {0x1C00, "Defect list not found"}, |
| 589 | {0x1C01, "Primary defect list not found"}, |
| 590 | {0x1C02, "Grown defect list not found"}, |
| 591 | |
| 592 | {0x1D00, "Miscompare during verify operation"}, |
| 593 | |
| 594 | {0x1E00, "Recovered id with ECC correction"}, |
| 595 | |
| 596 | {0x1F00, "Partial defect list transfer"}, |
| 597 | |
| 598 | {0x2000, "Invalid command operation code"}, |
| 599 | {0x2001, "Access denied - initiator pending-enrolled"}, |
| 600 | {0x2002, "Access denied - no access rights"}, |
| 601 | {0x2003, "Access denied - invalid mgmt id key"}, |
| 602 | {0x2004, "Illegal command while in write capable state"}, |
| 603 | {0x2005, "Obsolete"}, |
| 604 | {0x2006, "Illegal command while in explicit address mode"}, |
| 605 | {0x2007, "Illegal command while in implicit address mode"}, |
| 606 | {0x2008, "Access denied - enrollment conflict"}, |
| 607 | {0x2009, "Access denied - invalid LU identifier"}, |
| 608 | {0x200A, "Access denied - invalid proxy token"}, |
| 609 | {0x200B, "Access denied - ACL LUN conflict"}, |
| 610 | |
| 611 | {0x2100, "Logical block address out of range"}, |
| 612 | {0x2101, "Invalid element address"}, |
| 613 | {0x2102, "Invalid address for write"}, |
| 614 | |
| 615 | {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, |
| 616 | |
| 617 | {0x2400, "Invalid field in cdb"}, |
| 618 | {0x2401, "CDB decryption error"}, |
| 619 | {0x2404, "Security audit value frozen"}, |
| 620 | {0x2405, "Security working key frozen"}, |
| 621 | {0x2406, "Nonce not unique"}, |
| 622 | {0x2407, "Nonce timestamp out of range"}, |
| 623 | |
| 624 | {0x2500, "Logical unit not supported"}, |
| 625 | |
| 626 | {0x2600, "Invalid field in parameter list"}, |
| 627 | {0x2601, "Parameter not supported"}, |
| 628 | {0x2602, "Parameter value invalid"}, |
| 629 | {0x2603, "Threshold parameters not supported"}, |
| 630 | {0x2604, "Invalid release of persistent reservation"}, |
| 631 | {0x2605, "Data decryption error"}, |
| 632 | {0x2606, "Too many target descriptors"}, |
| 633 | {0x2607, "Unsupported target descriptor type code"}, |
| 634 | {0x2608, "Too many segment descriptors"}, |
| 635 | {0x2609, "Unsupported segment descriptor type code"}, |
| 636 | {0x260A, "Unexpected inexact segment"}, |
| 637 | {0x260B, "Inline data length exceeded"}, |
| 638 | {0x260C, "Invalid operation for copy source or destination"}, |
| 639 | {0x260D, "Copy segment granularity violation"}, |
| 640 | {0x260E, "Invalid parameter while port is enabled"}, |
| 641 | {0x260F, "Invalid data-out buffer integrity"}, |
| 642 | |
| 643 | {0x2700, "Write protected"}, |
| 644 | {0x2701, "Hardware write protected"}, |
| 645 | {0x2702, "Logical unit software write protected"}, |
| 646 | {0x2703, "Associated write protect"}, |
| 647 | {0x2704, "Persistent write protect"}, |
| 648 | {0x2705, "Permanent write protect"}, |
| 649 | {0x2706, "Conditional write protect"}, |
| 650 | |
| 651 | {0x2800, "Not ready to ready change, medium may have changed"}, |
| 652 | {0x2801, "Import or export element accessed"}, |
| 653 | |
| 654 | {0x2900, "Power on, reset, or bus device reset occurred"}, |
| 655 | {0x2901, "Power on occurred"}, |
| 656 | {0x2902, "Scsi bus reset occurred"}, |
| 657 | {0x2903, "Bus device reset function occurred"}, |
| 658 | {0x2904, "Device internal reset"}, |
| 659 | {0x2905, "Transceiver mode changed to single-ended"}, |
| 660 | {0x2906, "Transceiver mode changed to lvd"}, |
| 661 | {0x2907, "I_T nexus loss occurred"}, |
| 662 | |
| 663 | {0x2A00, "Parameters changed"}, |
| 664 | {0x2A01, "Mode parameters changed"}, |
| 665 | {0x2A02, "Log parameters changed"}, |
| 666 | {0x2A03, "Reservations preempted"}, |
| 667 | {0x2A04, "Reservations released"}, |
| 668 | {0x2A05, "Registrations preempted"}, |
| 669 | {0x2A06, "Asymmetric access state changed"}, |
| 670 | {0x2A07, "Implicit asymmetric access state transition failed"}, |
| 671 | {0x2A08, "Priority changed"}, |
| 672 | {0x2A09, "Capacity data has changed"}, |
| 673 | |
| 674 | {0x2B00, "Copy cannot execute since host cannot disconnect"}, |
| 675 | |
| 676 | {0x2C00, "Command sequence error"}, |
| 677 | {0x2C01, "Too many windows specified"}, |
| 678 | {0x2C02, "Invalid combination of windows specified"}, |
| 679 | {0x2C03, "Current program area is not empty"}, |
| 680 | {0x2C04, "Current program area is empty"}, |
| 681 | {0x2C05, "Illegal power condition request"}, |
| 682 | {0x2C06, "Persistent prevent conflict"}, |
| 683 | {0x2C07, "Previous busy status"}, |
| 684 | {0x2C08, "Previous task set full status"}, |
| 685 | {0x2C09, "Previous reservation conflict status"}, |
| 686 | {0x2C0A, "Partition or collection contains user objects"}, |
| 687 | {0x2C0B, "Not reserved"}, |
| 688 | |
| 689 | {0x2D00, "Overwrite error on update in place"}, |
| 690 | |
| 691 | {0x2E00, "Insufficient time for operation"}, |
| 692 | |
| 693 | {0x2F00, "Commands cleared by another initiator"}, |
| 694 | |
| 695 | {0x3000, "Incompatible medium installed"}, |
| 696 | {0x3001, "Cannot read medium - unknown format"}, |
| 697 | {0x3002, "Cannot read medium - incompatible format"}, |
| 698 | {0x3003, "Cleaning cartridge installed"}, |
| 699 | {0x3004, "Cannot write medium - unknown format"}, |
| 700 | {0x3005, "Cannot write medium - incompatible format"}, |
| 701 | {0x3006, "Cannot format medium - incompatible medium"}, |
| 702 | {0x3007, "Cleaning failure"}, |
| 703 | {0x3008, "Cannot write - application code mismatch"}, |
| 704 | {0x3009, "Current session not fixated for append"}, |
| 705 | {0x300A, "Cleaning request rejected"}, |
| 706 | {0x300C, "WORM medium, overwrite attempted"}, |
| 707 | {0x3010, "Medium not formatted"}, |
| 708 | |
| 709 | {0x3100, "Medium format corrupted"}, |
| 710 | {0x3101, "Format command failed"}, |
| 711 | {0x3102, "Zoned formatting failed due to spare linking"}, |
| 712 | |
| 713 | {0x3200, "No defect spare location available"}, |
| 714 | {0x3201, "Defect list update failure"}, |
| 715 | |
| 716 | {0x3300, "Tape length error"}, |
| 717 | |
| 718 | {0x3400, "Enclosure failure"}, |
| 719 | |
| 720 | {0x3500, "Enclosure services failure"}, |
| 721 | {0x3501, "Unsupported enclosure function"}, |
| 722 | {0x3502, "Enclosure services unavailable"}, |
| 723 | {0x3503, "Enclosure services transfer failure"}, |
| 724 | {0x3504, "Enclosure services transfer refused"}, |
| 725 | {0x3505, "Enclosure services checksum error"}, |
| 726 | |
| 727 | {0x3600, "Ribbon, ink, or toner failure"}, |
| 728 | |
| 729 | {0x3700, "Rounded parameter"}, |
| 730 | |
| 731 | {0x3800, "Event status notification"}, |
| 732 | {0x3802, "Esn - power management class event"}, |
| 733 | {0x3804, "Esn - media class event"}, |
| 734 | {0x3806, "Esn - device busy class event"}, |
| 735 | |
| 736 | {0x3900, "Saving parameters not supported"}, |
| 737 | |
| 738 | {0x3A00, "Medium not present"}, |
| 739 | {0x3A01, "Medium not present - tray closed"}, |
| 740 | {0x3A02, "Medium not present - tray open"}, |
| 741 | {0x3A03, "Medium not present - loadable"}, |
| 742 | {0x3A04, "Medium not present - medium auxiliary memory accessible"}, |
| 743 | |
| 744 | {0x3B00, "Sequential positioning error"}, |
| 745 | {0x3B01, "Tape position error at beginning-of-medium"}, |
| 746 | {0x3B02, "Tape position error at end-of-medium"}, |
| 747 | {0x3B03, "Tape or electronic vertical forms unit not ready"}, |
| 748 | {0x3B04, "Slew failure"}, |
| 749 | {0x3B05, "Paper jam"}, |
| 750 | {0x3B06, "Failed to sense top-of-form"}, |
| 751 | {0x3B07, "Failed to sense bottom-of-form"}, |
| 752 | {0x3B08, "Reposition error"}, |
| 753 | {0x3B09, "Read past end of medium"}, |
| 754 | {0x3B0A, "Read past beginning of medium"}, |
| 755 | {0x3B0B, "Position past end of medium"}, |
| 756 | {0x3B0C, "Position past beginning of medium"}, |
| 757 | {0x3B0D, "Medium destination element full"}, |
| 758 | {0x3B0E, "Medium source element empty"}, |
| 759 | {0x3B0F, "End of medium reached"}, |
| 760 | {0x3B11, "Medium magazine not accessible"}, |
| 761 | {0x3B12, "Medium magazine removed"}, |
| 762 | {0x3B13, "Medium magazine inserted"}, |
| 763 | {0x3B14, "Medium magazine locked"}, |
| 764 | {0x3B15, "Medium magazine unlocked"}, |
| 765 | {0x3B16, "Mechanical positioning or changer error"}, |
| 766 | {0x3B17, "Read past end of user object"}, |
| 767 | |
| 768 | {0x3D00, "Invalid bits in identify message"}, |
| 769 | |
| 770 | {0x3E00, "Logical unit has not self-configured yet"}, |
| 771 | {0x3E01, "Logical unit failure"}, |
| 772 | {0x3E02, "Timeout on logical unit"}, |
| 773 | {0x3E03, "Logical unit failed self-test"}, |
| 774 | {0x3E04, "Logical unit unable to update self-test log"}, |
| 775 | |
| 776 | {0x3F00, "Target operating conditions have changed"}, |
| 777 | {0x3F01, "Microcode has been changed"}, |
| 778 | {0x3F02, "Changed operating definition"}, |
| 779 | {0x3F03, "Inquiry data has changed"}, |
| 780 | {0x3F04, "Component device attached"}, |
| 781 | {0x3F05, "Device identifier changed"}, |
| 782 | {0x3F06, "Redundancy group created or modified"}, |
| 783 | {0x3F07, "Redundancy group deleted"}, |
| 784 | {0x3F08, "Spare created or modified"}, |
| 785 | {0x3F09, "Spare deleted"}, |
| 786 | {0x3F0A, "Volume set created or modified"}, |
| 787 | {0x3F0B, "Volume set deleted"}, |
| 788 | {0x3F0C, "Volume set deassigned"}, |
| 789 | {0x3F0D, "Volume set reassigned"}, |
| 790 | {0x3F0E, "Reported luns data has changed"}, |
| 791 | {0x3F0F, "Echo buffer overwritten"}, |
| 792 | {0x3F10, "Medium loadable"}, |
| 793 | {0x3F11, "Medium auxiliary memory accessible"}, |
| 794 | /* |
| 795 | * {0x40NN, "Ram failure"}, |
| 796 | * {0x40NN, "Diagnostic failure on component nn"}, |
| 797 | * {0x41NN, "Data path failure"}, |
| 798 | * {0x42NN, "Power-on or self-test failure"}, |
| 799 | */ |
| 800 | {0x4300, "Message error"}, |
| 801 | |
| 802 | {0x4400, "Internal target failure"}, |
| 803 | |
| 804 | {0x4500, "Select or reselect failure"}, |
| 805 | |
| 806 | {0x4600, "Unsuccessful soft reset"}, |
| 807 | |
| 808 | {0x4700, "Scsi parity error"}, |
| 809 | {0x4701, "Data phase CRC error detected"}, |
| 810 | {0x4702, "Scsi parity error detected during st data phase"}, |
| 811 | {0x4703, "Information unit CRC error detected"}, |
| 812 | {0x4704, "Asynchronous information protection error detected"}, |
| 813 | {0x4705, "Protocol service CRC error"}, |
| 814 | {0x477f, "Some commands cleared by iSCSI Protocol event"}, |
| 815 | |
| 816 | {0x4800, "Initiator detected error message received"}, |
| 817 | |
| 818 | {0x4900, "Invalid message error"}, |
| 819 | |
| 820 | {0x4A00, "Command phase error"}, |
| 821 | |
| 822 | {0x4B00, "Data phase error"}, |
| 823 | {0x4B01, "Invalid target port transfer tag received"}, |
| 824 | {0x4B02, "Too much write data"}, |
| 825 | {0x4B03, "Ack/nak timeout"}, |
| 826 | {0x4B04, "Nak received"}, |
| 827 | {0x4B05, "Data offset error"}, |
| 828 | {0x4B06, "Initiator response timeout"}, |
| 829 | |
| 830 | {0x4C00, "Logical unit failed self-configuration"}, |
| 831 | /* |
| 832 | * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"}, |
| 833 | */ |
| 834 | {0x4E00, "Overlapped commands attempted"}, |
| 835 | |
| 836 | {0x5000, "Write append error"}, |
| 837 | {0x5001, "Write append position error"}, |
| 838 | {0x5002, "Position error related to timing"}, |
| 839 | |
| 840 | {0x5100, "Erase failure"}, |
| 841 | {0x5101, "Erase failure - incomplete erase operation detected"}, |
| 842 | |
| 843 | {0x5200, "Cartridge fault"}, |
| 844 | |
| 845 | {0x5300, "Media load or eject failed"}, |
| 846 | {0x5301, "Unload tape failure"}, |
| 847 | {0x5302, "Medium removal prevented"}, |
| 848 | |
| 849 | {0x5400, "Scsi to host system interface failure"}, |
| 850 | |
| 851 | {0x5500, "System resource failure"}, |
| 852 | {0x5501, "System buffer full"}, |
| 853 | {0x5502, "Insufficient reservation resources"}, |
| 854 | {0x5503, "Insufficient resources"}, |
| 855 | {0x5504, "Insufficient registration resources"}, |
| 856 | {0x5505, "Insufficient access control resources"}, |
| 857 | {0x5506, "Auxiliary memory out of space"}, |
| 858 | {0x5507, "Quota error"}, |
| 859 | |
| 860 | {0x5700, "Unable to recover table-of-contents"}, |
| 861 | |
| 862 | {0x5800, "Generation does not exist"}, |
| 863 | |
| 864 | {0x5900, "Updated block read"}, |
| 865 | |
| 866 | {0x5A00, "Operator request or state change input"}, |
| 867 | {0x5A01, "Operator medium removal request"}, |
| 868 | {0x5A02, "Operator selected write protect"}, |
| 869 | {0x5A03, "Operator selected write permit"}, |
| 870 | |
| 871 | {0x5B00, "Log exception"}, |
| 872 | {0x5B01, "Threshold condition met"}, |
| 873 | {0x5B02, "Log counter at maximum"}, |
| 874 | {0x5B03, "Log list codes exhausted"}, |
| 875 | |
| 876 | {0x5C00, "Rpl status change"}, |
| 877 | {0x5C01, "Spindles synchronized"}, |
| 878 | {0x5C02, "Spindles not synchronized"}, |
| 879 | |
| 880 | {0x5D00, "Failure prediction threshold exceeded"}, |
| 881 | {0x5D01, "Media failure prediction threshold exceeded"}, |
| 882 | {0x5D02, "Logical unit failure prediction threshold exceeded"}, |
| 883 | {0x5D03, "Spare area exhaustion prediction threshold exceeded"}, |
| 884 | {0x5D10, "Hardware impending failure general hard drive failure"}, |
| 885 | {0x5D11, "Hardware impending failure drive error rate too high"}, |
| 886 | {0x5D12, "Hardware impending failure data error rate too high"}, |
| 887 | {0x5D13, "Hardware impending failure seek error rate too high"}, |
| 888 | {0x5D14, "Hardware impending failure too many block reassigns"}, |
| 889 | {0x5D15, "Hardware impending failure access times too high"}, |
| 890 | {0x5D16, "Hardware impending failure start unit times too high"}, |
| 891 | {0x5D17, "Hardware impending failure channel parametrics"}, |
| 892 | {0x5D18, "Hardware impending failure controller detected"}, |
| 893 | {0x5D19, "Hardware impending failure throughput performance"}, |
| 894 | {0x5D1A, "Hardware impending failure seek time performance"}, |
| 895 | {0x5D1B, "Hardware impending failure spin-up retry count"}, |
| 896 | {0x5D1C, "Hardware impending failure drive calibration retry count"}, |
| 897 | {0x5D20, "Controller impending failure general hard drive failure"}, |
| 898 | {0x5D21, "Controller impending failure drive error rate too high"}, |
| 899 | {0x5D22, "Controller impending failure data error rate too high"}, |
| 900 | {0x5D23, "Controller impending failure seek error rate too high"}, |
| 901 | {0x5D24, "Controller impending failure too many block reassigns"}, |
| 902 | {0x5D25, "Controller impending failure access times too high"}, |
| 903 | {0x5D26, "Controller impending failure start unit times too high"}, |
| 904 | {0x5D27, "Controller impending failure channel parametrics"}, |
| 905 | {0x5D28, "Controller impending failure controller detected"}, |
| 906 | {0x5D29, "Controller impending failure throughput performance"}, |
| 907 | {0x5D2A, "Controller impending failure seek time performance"}, |
| 908 | {0x5D2B, "Controller impending failure spin-up retry count"}, |
| 909 | {0x5D2C, "Controller impending failure drive calibration retry count"}, |
| 910 | {0x5D30, "Data channel impending failure general hard drive failure"}, |
| 911 | {0x5D31, "Data channel impending failure drive error rate too high"}, |
| 912 | {0x5D32, "Data channel impending failure data error rate too high"}, |
| 913 | {0x5D33, "Data channel impending failure seek error rate too high"}, |
| 914 | {0x5D34, "Data channel impending failure too many block reassigns"}, |
| 915 | {0x5D35, "Data channel impending failure access times too high"}, |
| 916 | {0x5D36, "Data channel impending failure start unit times too high"}, |
| 917 | {0x5D37, "Data channel impending failure channel parametrics"}, |
| 918 | {0x5D38, "Data channel impending failure controller detected"}, |
| 919 | {0x5D39, "Data channel impending failure throughput performance"}, |
| 920 | {0x5D3A, "Data channel impending failure seek time performance"}, |
| 921 | {0x5D3B, "Data channel impending failure spin-up retry count"}, |
| 922 | {0x5D3C, "Data channel impending failure drive calibration retry " |
| 923 | "count"}, |
| 924 | {0x5D40, "Servo impending failure general hard drive failure"}, |
| 925 | {0x5D41, "Servo impending failure drive error rate too high"}, |
| 926 | {0x5D42, "Servo impending failure data error rate too high"}, |
| 927 | {0x5D43, "Servo impending failure seek error rate too high"}, |
| 928 | {0x5D44, "Servo impending failure too many block reassigns"}, |
| 929 | {0x5D45, "Servo impending failure access times too high"}, |
| 930 | {0x5D46, "Servo impending failure start unit times too high"}, |
| 931 | {0x5D47, "Servo impending failure channel parametrics"}, |
| 932 | {0x5D48, "Servo impending failure controller detected"}, |
| 933 | {0x5D49, "Servo impending failure throughput performance"}, |
| 934 | {0x5D4A, "Servo impending failure seek time performance"}, |
| 935 | {0x5D4B, "Servo impending failure spin-up retry count"}, |
| 936 | {0x5D4C, "Servo impending failure drive calibration retry count"}, |
| 937 | {0x5D50, "Spindle impending failure general hard drive failure"}, |
| 938 | {0x5D51, "Spindle impending failure drive error rate too high"}, |
| 939 | {0x5D52, "Spindle impending failure data error rate too high"}, |
| 940 | {0x5D53, "Spindle impending failure seek error rate too high"}, |
| 941 | {0x5D54, "Spindle impending failure too many block reassigns"}, |
| 942 | {0x5D55, "Spindle impending failure access times too high"}, |
| 943 | {0x5D56, "Spindle impending failure start unit times too high"}, |
| 944 | {0x5D57, "Spindle impending failure channel parametrics"}, |
| 945 | {0x5D58, "Spindle impending failure controller detected"}, |
| 946 | {0x5D59, "Spindle impending failure throughput performance"}, |
| 947 | {0x5D5A, "Spindle impending failure seek time performance"}, |
| 948 | {0x5D5B, "Spindle impending failure spin-up retry count"}, |
| 949 | {0x5D5C, "Spindle impending failure drive calibration retry count"}, |
| 950 | {0x5D60, "Firmware impending failure general hard drive failure"}, |
| 951 | {0x5D61, "Firmware impending failure drive error rate too high"}, |
| 952 | {0x5D62, "Firmware impending failure data error rate too high"}, |
| 953 | {0x5D63, "Firmware impending failure seek error rate too high"}, |
| 954 | {0x5D64, "Firmware impending failure too many block reassigns"}, |
| 955 | {0x5D65, "Firmware impending failure access times too high"}, |
| 956 | {0x5D66, "Firmware impending failure start unit times too high"}, |
| 957 | {0x5D67, "Firmware impending failure channel parametrics"}, |
| 958 | {0x5D68, "Firmware impending failure controller detected"}, |
| 959 | {0x5D69, "Firmware impending failure throughput performance"}, |
| 960 | {0x5D6A, "Firmware impending failure seek time performance"}, |
| 961 | {0x5D6B, "Firmware impending failure spin-up retry count"}, |
| 962 | {0x5D6C, "Firmware impending failure drive calibration retry count"}, |
| 963 | {0x5DFF, "Failure prediction threshold exceeded (false)"}, |
| 964 | |
| 965 | {0x5E00, "Low power condition on"}, |
| 966 | {0x5E01, "Idle condition activated by timer"}, |
| 967 | {0x5E02, "Standby condition activated by timer"}, |
| 968 | {0x5E03, "Idle condition activated by command"}, |
| 969 | {0x5E04, "Standby condition activated by command"}, |
| 970 | {0x5E41, "Power state change to active"}, |
| 971 | {0x5E42, "Power state change to idle"}, |
| 972 | {0x5E43, "Power state change to standby"}, |
| 973 | {0x5E45, "Power state change to sleep"}, |
| 974 | {0x5E47, "Power state change to device control"}, |
| 975 | |
| 976 | {0x6000, "Lamp failure"}, |
| 977 | |
| 978 | {0x6100, "Video acquisition error"}, |
| 979 | {0x6101, "Unable to acquire video"}, |
| 980 | {0x6102, "Out of focus"}, |
| 981 | |
| 982 | {0x6200, "Scan head positioning error"}, |
| 983 | |
| 984 | {0x6300, "End of user area encountered on this track"}, |
| 985 | {0x6301, "Packet does not fit in available space"}, |
| 986 | |
| 987 | {0x6400, "Illegal mode for this track"}, |
| 988 | {0x6401, "Invalid packet size"}, |
| 989 | |
| 990 | {0x6500, "Voltage fault"}, |
| 991 | |
| 992 | {0x6600, "Automatic document feeder cover up"}, |
| 993 | {0x6601, "Automatic document feeder lift up"}, |
| 994 | {0x6602, "Document jam in automatic document feeder"}, |
| 995 | {0x6603, "Document miss feed automatic in document feeder"}, |
| 996 | |
| 997 | {0x6700, "Configuration failure"}, |
| 998 | {0x6701, "Configuration of incapable logical units failed"}, |
| 999 | {0x6702, "Add logical unit failed"}, |
| 1000 | {0x6703, "Modification of logical unit failed"}, |
| 1001 | {0x6704, "Exchange of logical unit failed"}, |
| 1002 | {0x6705, "Remove of logical unit failed"}, |
| 1003 | {0x6706, "Attachment of logical unit failed"}, |
| 1004 | {0x6707, "Creation of logical unit failed"}, |
| 1005 | {0x6708, "Assign failure occurred"}, |
| 1006 | {0x6709, "Multiply assigned logical unit"}, |
| 1007 | {0x670A, "Set target port groups command failed"}, |
| 1008 | |
| 1009 | {0x6800, "Logical unit not configured"}, |
| 1010 | |
| 1011 | {0x6900, "Data loss on logical unit"}, |
| 1012 | {0x6901, "Multiple logical unit failures"}, |
| 1013 | {0x6902, "Parity/data mismatch"}, |
| 1014 | |
| 1015 | {0x6A00, "Informational, refer to log"}, |
| 1016 | |
| 1017 | {0x6B00, "State change has occurred"}, |
| 1018 | {0x6B01, "Redundancy level got better"}, |
| 1019 | {0x6B02, "Redundancy level got worse"}, |
| 1020 | |
| 1021 | {0x6C00, "Rebuild failure occurred"}, |
| 1022 | |
| 1023 | {0x6D00, "Recalculate failure occurred"}, |
| 1024 | |
| 1025 | {0x6E00, "Command to logical unit failed"}, |
| 1026 | |
| 1027 | {0x6F00, "Copy protection key exchange failure - authentication " |
| 1028 | "failure"}, |
| 1029 | {0x6F01, "Copy protection key exchange failure - key not present"}, |
| 1030 | {0x6F02, "Copy protection key exchange failure - key not established"}, |
| 1031 | {0x6F03, "Read of scrambled sector without authentication"}, |
| 1032 | {0x6F04, "Media region code is mismatched to logical unit region"}, |
| 1033 | {0x6F05, "Drive region must be permanent/region reset count error"}, |
| 1034 | /* |
| 1035 | * {0x70NN, "Decompression exception short algorithm id of nn"}, |
| 1036 | */ |
| 1037 | {0x7100, "Decompression exception long algorithm id"}, |
| 1038 | |
| 1039 | {0x7200, "Session fixation error"}, |
| 1040 | {0x7201, "Session fixation error writing lead-in"}, |
| 1041 | {0x7202, "Session fixation error writing lead-out"}, |
| 1042 | {0x7203, "Session fixation error - incomplete track in session"}, |
| 1043 | {0x7204, "Empty or partially written reserved track"}, |
| 1044 | {0x7205, "No more track reservations allowed"}, |
| 1045 | |
| 1046 | {0x7300, "Cd control error"}, |
| 1047 | {0x7301, "Power calibration area almost full"}, |
| 1048 | {0x7302, "Power calibration area is full"}, |
| 1049 | {0x7303, "Power calibration area error"}, |
| 1050 | {0x7304, "Program memory area update failure"}, |
| 1051 | {0x7305, "Program memory area is full"}, |
| 1052 | {0x7306, "RMA/PMA is almost full"}, |
| 1053 | {0, NULL} |
| 1054 | }; |
| 1055 | |
| 1056 | struct error_info2 { |
| 1057 | unsigned char code1, code2_min, code2_max; |
| 1058 | const char * fmt; |
| 1059 | }; |
| 1060 | |
Arjan van de Ven | 0ad7820 | 2005-11-28 16:22:25 +0100 | [diff] [blame] | 1061 | static const struct error_info2 additional2[] = |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1062 | { |
| 1063 | {0x40,0x00,0x7f,"Ram failure (%x)"}, |
| 1064 | {0x40,0x80,0xff,"Diagnostic failure on component (%x)"}, |
| 1065 | {0x41,0x00,0xff,"Data path failure (%x)"}, |
| 1066 | {0x42,0x00,0xff,"Power-on or self-test failure (%x)"}, |
| 1067 | {0x4D,0x00,0xff,"Tagged overlapped commands (queue tag %x)"}, |
| 1068 | {0x70,0x00,0xff,"Decompression exception short algorithm id of %x"}, |
| 1069 | {0, 0, 0, NULL} |
| 1070 | }; |
| 1071 | |
| 1072 | /* description of the sense key values */ |
Arjan van de Ven | 0ad7820 | 2005-11-28 16:22:25 +0100 | [diff] [blame] | 1073 | static const char * const snstext[] = { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1074 | "No Sense", /* 0: There is no sense information */ |
| 1075 | "Recovered Error", /* 1: The last command completed successfully |
| 1076 | but used error correction */ |
| 1077 | "Not Ready", /* 2: The addressed target is not ready */ |
| 1078 | "Medium Error", /* 3: Data error detected on the medium */ |
| 1079 | "Hardware Error", /* 4: Controller or device failure */ |
| 1080 | "Illegal Request", /* 5: Error in request */ |
| 1081 | "Unit Attention", /* 6: Removable medium was changed, or |
| 1082 | the target has been reset, or ... */ |
| 1083 | "Data Protect", /* 7: Access to the data is blocked */ |
| 1084 | "Blank Check", /* 8: Reached unexpected written or unwritten |
| 1085 | region of the medium */ |
| 1086 | "Vendor Specific(9)", |
| 1087 | "Copy Aborted", /* A: COPY or COMPARE was aborted */ |
| 1088 | "Aborted Command", /* B: The target aborted the command */ |
| 1089 | "Equal", /* C: A SEARCH DATA command found data equal */ |
| 1090 | "Volume Overflow", /* D: Medium full with still data to be written */ |
| 1091 | "Miscompare", /* E: Source data and data on the medium |
| 1092 | do not agree */ |
| 1093 | }; |
| 1094 | #endif |
| 1095 | |
| 1096 | /* Get sense key string or NULL if not available */ |
| 1097 | const char * |
| 1098 | scsi_sense_key_string(unsigned char key) { |
| 1099 | #ifdef CONFIG_SCSI_CONSTANTS |
| 1100 | if (key <= 0xE) |
| 1101 | return snstext[key]; |
| 1102 | #endif |
| 1103 | return NULL; |
| 1104 | } |
| 1105 | EXPORT_SYMBOL(scsi_sense_key_string); |
| 1106 | |
| 1107 | /* |
| 1108 | * Get additional sense code string or NULL if not available. |
| 1109 | * This string may contain a "%x" and should be printed with ascq as arg. |
| 1110 | */ |
| 1111 | const char * |
| 1112 | scsi_extd_sense_format(unsigned char asc, unsigned char ascq) { |
| 1113 | #ifdef CONFIG_SCSI_CONSTANTS |
| 1114 | int i; |
| 1115 | unsigned short code = ((asc << 8) | ascq); |
| 1116 | |
| 1117 | for (i=0; additional[i].text; i++) |
| 1118 | if (additional[i].code12 == code) |
| 1119 | return additional[i].text; |
| 1120 | for (i=0; additional2[i].fmt; i++) |
| 1121 | if (additional2[i].code1 == asc && |
| 1122 | additional2[i].code2_min >= ascq && |
| 1123 | additional2[i].code2_max <= ascq) |
| 1124 | return additional2[i].fmt; |
| 1125 | #endif |
| 1126 | return NULL; |
| 1127 | } |
| 1128 | EXPORT_SYMBOL(scsi_extd_sense_format); |
| 1129 | |
| 1130 | /* Print extended sense information; no leadin, no linefeed */ |
| 1131 | static void |
| 1132 | scsi_show_extd_sense(unsigned char asc, unsigned char ascq) |
| 1133 | { |
| 1134 | const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq); |
| 1135 | |
| 1136 | if (extd_sense_fmt) { |
| 1137 | if (strstr(extd_sense_fmt, "%x")) { |
| 1138 | printk("Additional sense: "); |
| 1139 | printk(extd_sense_fmt, ascq); |
| 1140 | } else |
| 1141 | printk("Additional sense: %s", extd_sense_fmt); |
| 1142 | } else { |
| 1143 | if (asc >= 0x80) |
| 1144 | printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc, ascq); |
| 1145 | if (ascq >= 0x80) |
| 1146 | printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc, ascq); |
| 1147 | else |
| 1148 | printk("ASC=0x%x ASCQ=0x%x", asc, ascq); |
| 1149 | } |
| 1150 | } |
| 1151 | |
James Bottomley | ea73a9f | 2005-08-28 11:33:52 -0500 | [diff] [blame] | 1152 | void |
| 1153 | scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr) |
| 1154 | { |
| 1155 | const char *sense_txt; |
| 1156 | /* An example of deferred is when an earlier write to disk cache |
| 1157 | * succeeded, but now the disk discovers that it cannot write the |
| 1158 | * data to the magnetic media. |
| 1159 | */ |
| 1160 | const char *error = scsi_sense_is_deferred(sshdr) ? |
| 1161 | "<<DEFERRED>>" : "Current"; |
| 1162 | printk(KERN_INFO "%s: %s", name, error); |
| 1163 | if (sshdr->response_code >= 0x72) |
| 1164 | printk(" [descriptor]"); |
| 1165 | |
| 1166 | sense_txt = scsi_sense_key_string(sshdr->sense_key); |
| 1167 | if (sense_txt) |
| 1168 | printk(": sense key: %s\n", sense_txt); |
| 1169 | else |
| 1170 | printk(": sense key=0x%x\n", sshdr->sense_key); |
| 1171 | printk(KERN_INFO " "); |
| 1172 | scsi_show_extd_sense(sshdr->asc, sshdr->ascq); |
| 1173 | printk("\n"); |
| 1174 | } |
| 1175 | EXPORT_SYMBOL(scsi_print_sense_hdr); |
| 1176 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1177 | /* Print sense information */ |
| 1178 | void |
| 1179 | __scsi_print_sense(const char *name, const unsigned char *sense_buffer, |
| 1180 | int sense_len) |
| 1181 | { |
| 1182 | int k, num, res; |
| 1183 | unsigned int info; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1184 | struct scsi_sense_hdr ssh; |
| 1185 | |
| 1186 | res = scsi_normalize_sense(sense_buffer, sense_len, &ssh); |
| 1187 | if (0 == res) { |
| 1188 | /* this may be SCSI-1 sense data */ |
| 1189 | num = (sense_len < 32) ? sense_len : 32; |
| 1190 | printk(KERN_INFO "Unrecognized sense data (in hex):"); |
| 1191 | for (k = 0; k < num; ++k) { |
| 1192 | if (0 == (k % 16)) { |
| 1193 | printk("\n"); |
| 1194 | printk(KERN_INFO " "); |
| 1195 | } |
| 1196 | printk("%02x ", sense_buffer[k]); |
| 1197 | } |
| 1198 | printk("\n"); |
| 1199 | return; |
| 1200 | } |
James Bottomley | ea73a9f | 2005-08-28 11:33:52 -0500 | [diff] [blame] | 1201 | scsi_print_sense_hdr(name, &ssh); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1202 | if (ssh.response_code < 0x72) { |
| 1203 | /* only decode extras for "fixed" format now */ |
| 1204 | char buff[80]; |
| 1205 | int blen, fixed_valid; |
| 1206 | |
| 1207 | fixed_valid = sense_buffer[0] & 0x80; |
| 1208 | info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) | |
| 1209 | (sense_buffer[5] << 8) | sense_buffer[6]); |
| 1210 | res = 0; |
| 1211 | memset(buff, 0, sizeof(buff)); |
| 1212 | blen = sizeof(buff) - 1; |
| 1213 | if (fixed_valid) |
| 1214 | res += snprintf(buff + res, blen - res, |
| 1215 | "Info fld=0x%x", info); |
| 1216 | if (sense_buffer[2] & 0x80) { |
| 1217 | /* current command has read a filemark */ |
| 1218 | if (res > 0) |
| 1219 | res += snprintf(buff + res, blen - res, ", "); |
| 1220 | res += snprintf(buff + res, blen - res, "FMK"); |
| 1221 | } |
| 1222 | if (sense_buffer[2] & 0x40) { |
| 1223 | /* end-of-medium condition exists */ |
| 1224 | if (res > 0) |
| 1225 | res += snprintf(buff + res, blen - res, ", "); |
| 1226 | res += snprintf(buff + res, blen - res, "EOM"); |
| 1227 | } |
| 1228 | if (sense_buffer[2] & 0x20) { |
| 1229 | /* incorrect block length requested */ |
| 1230 | if (res > 0) |
| 1231 | res += snprintf(buff + res, blen - res, ", "); |
| 1232 | res += snprintf(buff + res, blen - res, "ILI"); |
| 1233 | } |
| 1234 | if (res > 0) |
| 1235 | printk(KERN_INFO "%s\n", buff); |
| 1236 | } else if (ssh.additional_length > 0) { |
| 1237 | /* descriptor format with sense descriptors */ |
| 1238 | num = 8 + ssh.additional_length; |
| 1239 | num = (sense_len < num) ? sense_len : num; |
| 1240 | printk(KERN_INFO "Descriptor sense data with sense " |
| 1241 | "descriptors (in hex):"); |
| 1242 | for (k = 0; k < num; ++k) { |
| 1243 | if (0 == (k % 16)) { |
| 1244 | printk("\n"); |
| 1245 | printk(KERN_INFO " "); |
| 1246 | } |
| 1247 | printk("%02x ", sense_buffer[k]); |
| 1248 | } |
| 1249 | printk("\n"); |
| 1250 | } |
| 1251 | } |
| 1252 | EXPORT_SYMBOL(__scsi_print_sense); |
| 1253 | |
| 1254 | void scsi_print_sense(const char *devclass, struct scsi_cmnd *cmd) |
| 1255 | { |
| 1256 | const char *name = devclass; |
| 1257 | |
| 1258 | if (cmd->request->rq_disk) |
| 1259 | name = cmd->request->rq_disk->disk_name; |
| 1260 | __scsi_print_sense(name, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); |
| 1261 | } |
| 1262 | EXPORT_SYMBOL(scsi_print_sense); |
| 1263 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1264 | void scsi_print_command(struct scsi_cmnd *cmd) |
| 1265 | { |
| 1266 | /* Assume appended output (i.e. not at start of line) */ |
James Bottomley | 9ccfc75 | 2005-10-02 11:45:08 -0500 | [diff] [blame] | 1267 | sdev_printk("", cmd->device, "\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1268 | printk(KERN_INFO " command: "); |
| 1269 | scsi_print_cdb(cmd->cmnd, cmd->cmd_len, 0); |
| 1270 | } |
| 1271 | EXPORT_SYMBOL(scsi_print_command); |
| 1272 | |
| 1273 | #ifdef CONFIG_SCSI_CONSTANTS |
| 1274 | |
Arjan van de Ven | 0ad7820 | 2005-11-28 16:22:25 +0100 | [diff] [blame] | 1275 | static const char * const hostbyte_table[]={ |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 1276 | "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1277 | "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", |
| 1278 | "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY"}; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 1279 | #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1280 | |
| 1281 | void scsi_print_hostbyte(int scsiresult) |
| 1282 | { |
| 1283 | int hb = host_byte(scsiresult); |
| 1284 | |
| 1285 | printk("Hostbyte=0x%02x", hb); |
| 1286 | if (hb < NUM_HOSTBYTE_STRS) |
| 1287 | printk("(%s) ", hostbyte_table[hb]); |
| 1288 | else |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 1289 | printk("is invalid "); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1290 | } |
| 1291 | #else |
| 1292 | void scsi_print_hostbyte(int scsiresult) |
| 1293 | { |
| 1294 | printk("Hostbyte=0x%02x ", host_byte(scsiresult)); |
| 1295 | } |
| 1296 | #endif |
| 1297 | |
| 1298 | #ifdef CONFIG_SCSI_CONSTANTS |
| 1299 | |
Arjan van de Ven | 0ad7820 | 2005-11-28 16:22:25 +0100 | [diff] [blame] | 1300 | static const char * const driverbyte_table[]={ |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 1301 | "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1302 | "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 1303 | #define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1304 | |
Arjan van de Ven | 0ad7820 | 2005-11-28 16:22:25 +0100 | [diff] [blame] | 1305 | static const char * const driversuggest_table[]={"SUGGEST_OK", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1306 | "SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE", |
| 1307 | "SUGGEST_5", "SUGGEST_6", "SUGGEST_7", "SUGGEST_SENSE"}; |
Tobias Klauser | 6391a11 | 2006-06-08 22:23:48 -0700 | [diff] [blame] | 1308 | #define NUM_SUGGEST_STRS ARRAY_SIZE(driversuggest_table) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1309 | |
| 1310 | void scsi_print_driverbyte(int scsiresult) |
| 1311 | { |
| 1312 | int dr = (driver_byte(scsiresult) & DRIVER_MASK); |
| 1313 | int su = ((driver_byte(scsiresult) & SUGGEST_MASK) >> 4); |
| 1314 | |
| 1315 | printk("Driverbyte=0x%02x ", driver_byte(scsiresult)); |
| 1316 | printk("(%s,%s) ", |
| 1317 | (dr < NUM_DRIVERBYTE_STRS ? driverbyte_table[dr] : "invalid"), |
| 1318 | (su < NUM_SUGGEST_STRS ? driversuggest_table[su] : "invalid")); |
| 1319 | } |
| 1320 | #else |
| 1321 | void scsi_print_driverbyte(int scsiresult) |
| 1322 | { |
| 1323 | printk("Driverbyte=0x%02x ", driver_byte(scsiresult)); |
| 1324 | } |
| 1325 | #endif |