David Woodhouse | 9c54004 | 2008-12-23 04:09:02 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Driver for the Solos PCI ADSL2+ card, designed to support Linux by |
| 3 | * Traverse Technologies -- http://www.traverse.com.au/ |
| 4 | * Xrio Limited -- http://www.xrio.com/ |
| 5 | * |
| 6 | * |
| 7 | * Copyright © 2008 Traverse Technologies |
| 8 | * Copyright © 2008 Intel Corporation |
| 9 | * |
| 10 | * Authors: Nathan Williams <nathan@traverse.com.au> |
| 11 | * David Woodhouse <dwmw2@infradead.org> |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or |
| 14 | * modify it under the terms of the GNU General Public License |
| 15 | * version 2, as published by the Free Software Foundation. |
| 16 | * |
| 17 | * This program is distributed in the hope that it will be useful, |
| 18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 20 | * GNU General Public License for more details. |
| 21 | */ |
| 22 | |
| 23 | #define DEBUG |
| 24 | #define VERBOSE_DEBUG |
| 25 | |
| 26 | #include <linux/interrupt.h> |
| 27 | #include <linux/module.h> |
| 28 | #include <linux/kernel.h> |
| 29 | #include <linux/errno.h> |
| 30 | #include <linux/ioport.h> |
| 31 | #include <linux/types.h> |
| 32 | #include <linux/pci.h> |
| 33 | #include <linux/atm.h> |
| 34 | #include <linux/atmdev.h> |
| 35 | #include <linux/skbuff.h> |
| 36 | #include <linux/sysfs.h> |
| 37 | #include <linux/device.h> |
| 38 | #include <linux/kobject.h> |
| 39 | |
| 40 | #define VERSION "0.04" |
| 41 | #define PTAG "solos-pci" |
| 42 | |
| 43 | #define CONFIG_RAM_SIZE 128 |
| 44 | #define FLAGS_ADDR 0x7C |
| 45 | #define IRQ_EN_ADDR 0x78 |
| 46 | #define FPGA_VER 0x74 |
| 47 | #define IRQ_CLEAR 0x70 |
| 48 | #define BUG_FLAG 0x6C |
| 49 | |
| 50 | #define DATA_RAM_SIZE 32768 |
| 51 | #define BUF_SIZE 4096 |
| 52 | |
| 53 | #define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2) |
| 54 | #define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE) |
| 55 | |
| 56 | static int debug = 0; |
| 57 | static int atmdebug = 0; |
| 58 | |
| 59 | struct pkt_hdr { |
| 60 | __le16 size; |
| 61 | __le16 vpi; |
| 62 | __le16 vci; |
| 63 | __le16 type; |
| 64 | }; |
| 65 | |
| 66 | #define PKT_DATA 0 |
| 67 | #define PKT_COMMAND 1 |
| 68 | #define PKT_POPEN 3 |
| 69 | #define PKT_PCLOSE 4 |
| 70 | |
| 71 | struct solos_card { |
| 72 | void __iomem *config_regs; |
| 73 | void __iomem *buffers; |
| 74 | int nr_ports; |
| 75 | struct pci_dev *dev; |
| 76 | struct atm_dev *atmdev[4]; |
| 77 | struct tasklet_struct tlet; |
| 78 | spinlock_t tx_lock; |
| 79 | spinlock_t tx_queue_lock; |
| 80 | spinlock_t cli_queue_lock; |
| 81 | struct sk_buff_head tx_queue[4]; |
| 82 | struct sk_buff_head cli_queue[4]; |
| 83 | }; |
| 84 | |
| 85 | #define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data) |
| 86 | |
| 87 | MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>"); |
| 88 | MODULE_DESCRIPTION("Solos PCI driver"); |
| 89 | MODULE_VERSION(VERSION); |
| 90 | MODULE_LICENSE("GPL"); |
| 91 | MODULE_PARM_DESC(debug, "Enable Loopback"); |
| 92 | MODULE_PARM_DESC(atmdebug, "Print ATM data"); |
| 93 | module_param(debug, int, 0444); |
| 94 | module_param(atmdebug, int, 0444); |
| 95 | |
| 96 | static int opens; |
| 97 | |
| 98 | static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb, |
| 99 | struct atm_vcc *vcc); |
| 100 | static int fpga_tx(struct solos_card *); |
| 101 | static irqreturn_t solos_irq(int irq, void *dev_id); |
| 102 | static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci); |
| 103 | static int list_vccs(int vci); |
| 104 | static int atm_init(struct solos_card *); |
| 105 | static void atm_remove(struct solos_card *); |
| 106 | static int send_command(struct solos_card *card, int dev, const char *buf, size_t size); |
| 107 | static void solos_bh(unsigned long); |
| 108 | static int print_buffer(struct sk_buff *buf); |
| 109 | |
| 110 | static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb) |
| 111 | { |
| 112 | if (vcc->pop) |
| 113 | vcc->pop(vcc, skb); |
| 114 | else |
| 115 | dev_kfree_skb_any(skb); |
| 116 | } |
| 117 | |
| 118 | static ssize_t console_show(struct device *dev, struct device_attribute *attr, |
| 119 | char *buf) |
| 120 | { |
| 121 | struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev); |
| 122 | struct solos_card *card = atmdev->dev_data; |
| 123 | struct sk_buff *skb; |
| 124 | |
| 125 | spin_lock(&card->cli_queue_lock); |
| 126 | skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]); |
| 127 | spin_unlock(&card->cli_queue_lock); |
| 128 | if(skb == NULL) |
| 129 | return sprintf(buf, "No data.\n"); |
| 130 | |
| 131 | memcpy(buf, skb->data, skb->len); |
| 132 | dev_dbg(&card->dev->dev, "len: %d\n", skb->len); |
| 133 | |
| 134 | kfree_skb(skb); |
| 135 | return skb->len; |
| 136 | } |
| 137 | |
| 138 | static int send_command(struct solos_card *card, int dev, const char *buf, size_t size) |
| 139 | { |
| 140 | struct sk_buff *skb; |
| 141 | struct pkt_hdr *header; |
| 142 | |
| 143 | // dev_dbg(&card->dev->dev, "size: %d\n", size); |
| 144 | |
| 145 | if (size > (BUF_SIZE - sizeof(*header))) { |
| 146 | dev_dbg(&card->dev->dev, "Command is too big. Dropping request\n"); |
| 147 | return 0; |
| 148 | } |
| 149 | skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC); |
| 150 | if (!skb) { |
| 151 | dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n"); |
| 152 | return 0; |
| 153 | } |
| 154 | |
| 155 | header = (void *)skb_put(skb, sizeof(*header)); |
| 156 | |
| 157 | header->size = cpu_to_le16(size); |
| 158 | header->vpi = cpu_to_le16(0); |
| 159 | header->vci = cpu_to_le16(0); |
| 160 | header->type = cpu_to_le16(PKT_COMMAND); |
| 161 | |
| 162 | memcpy(skb_put(skb, size), buf, size); |
| 163 | |
| 164 | fpga_queue(card, dev, skb, NULL); |
| 165 | |
| 166 | return 0; |
| 167 | } |
| 168 | |
| 169 | static ssize_t console_store(struct device *dev, struct device_attribute *attr, |
| 170 | const char *buf, size_t count) |
| 171 | { |
| 172 | struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev); |
| 173 | struct solos_card *card = atmdev->dev_data; |
| 174 | int err; |
| 175 | |
| 176 | err = send_command(card, SOLOS_CHAN(atmdev), buf, count); |
| 177 | |
| 178 | return err?:count; |
| 179 | } |
| 180 | |
| 181 | static DEVICE_ATTR(console, 0644, console_show, console_store); |
| 182 | |
| 183 | static irqreturn_t solos_irq(int irq, void *dev_id) |
| 184 | { |
| 185 | struct solos_card *card = dev_id; |
| 186 | int handled = 1; |
| 187 | |
| 188 | //ACK IRQ |
| 189 | iowrite32(0, card->config_regs + IRQ_CLEAR); |
| 190 | //Disable IRQs from FPGA |
| 191 | iowrite32(0, card->config_regs + IRQ_EN_ADDR); |
| 192 | |
| 193 | /* If we only do it when the device is open, we lose console |
| 194 | messages */ |
| 195 | if (1 || opens) |
| 196 | tasklet_schedule(&card->tlet); |
| 197 | |
| 198 | //Enable IRQs from FPGA |
| 199 | iowrite32(1, card->config_regs + IRQ_EN_ADDR); |
| 200 | return IRQ_RETVAL(handled); |
| 201 | } |
| 202 | |
| 203 | void solos_bh(unsigned long card_arg) |
| 204 | { |
| 205 | struct solos_card *card = (void *)card_arg; |
| 206 | int port; |
| 207 | uint32_t card_flags; |
| 208 | uint32_t tx_mask; |
| 209 | uint32_t rx_done = 0; |
| 210 | |
| 211 | card_flags = ioread32(card->config_regs + FLAGS_ADDR); |
| 212 | |
| 213 | /* The TX bits are set if the channel is busy; clear if not. We want to |
| 214 | invoke fpga_tx() unless _all_ the bits for active channels are set */ |
| 215 | tx_mask = (1 << card->nr_ports) - 1; |
| 216 | if ((card_flags & tx_mask) != tx_mask) |
| 217 | fpga_tx(card); |
| 218 | |
| 219 | for (port = 0; port < card->nr_ports; port++) { |
| 220 | if (card_flags & (0x10 << port)) { |
| 221 | struct pkt_hdr header; |
| 222 | struct sk_buff *skb; |
| 223 | struct atm_vcc *vcc; |
| 224 | int size; |
| 225 | |
| 226 | rx_done |= 0x10 << port; |
| 227 | |
| 228 | memcpy_fromio(&header, RX_BUF(card, port), sizeof(header)); |
| 229 | |
| 230 | size = le16_to_cpu(header.size); |
| 231 | |
| 232 | skb = alloc_skb(size, GFP_ATOMIC); |
| 233 | if (!skb) { |
| 234 | if (net_ratelimit()) |
| 235 | dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n"); |
| 236 | continue; |
| 237 | } |
| 238 | |
| 239 | memcpy_fromio(skb_put(skb, size), |
| 240 | RX_BUF(card, port) + sizeof(header), |
| 241 | size); |
| 242 | |
| 243 | if (atmdebug) { |
| 244 | dev_info(&card->dev->dev, "Received: device %d\n", port); |
| 245 | dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n", |
| 246 | size, le16_to_cpu(header.vpi), |
| 247 | le16_to_cpu(header.vci)); |
| 248 | print_buffer(skb); |
| 249 | } |
| 250 | |
| 251 | switch (le16_to_cpu(header.type)) { |
| 252 | case PKT_DATA: |
| 253 | vcc = find_vcc(card->atmdev[port], le16_to_cpu(header.vpi), |
| 254 | le16_to_cpu(header.vci)); |
| 255 | if (!vcc) { |
| 256 | if (net_ratelimit()) |
| 257 | dev_warn(&card->dev->dev, "Received packet for unknown VCI.VPI %d.%d on port %d\n", |
| 258 | le16_to_cpu(header.vci), le16_to_cpu(header.vpi), |
| 259 | port); |
| 260 | continue; |
| 261 | } |
| 262 | atm_charge(vcc, skb->truesize); |
| 263 | vcc->push(vcc, skb); |
| 264 | atomic_inc(&vcc->stats->rx); |
| 265 | break; |
| 266 | |
| 267 | case PKT_COMMAND: |
| 268 | default: /* FIXME: Not really, surely? */ |
| 269 | spin_lock(&card->cli_queue_lock); |
| 270 | if (skb_queue_len(&card->cli_queue[port]) > 10) { |
| 271 | if (net_ratelimit()) |
| 272 | dev_warn(&card->dev->dev, "Dropping console response on port %d\n", |
| 273 | port); |
| 274 | } else |
| 275 | skb_queue_tail(&card->cli_queue[port], skb); |
| 276 | spin_unlock(&card->cli_queue_lock); |
| 277 | break; |
| 278 | } |
| 279 | } |
| 280 | } |
| 281 | if (rx_done) |
| 282 | iowrite32(rx_done, card->config_regs + FLAGS_ADDR); |
| 283 | |
| 284 | return; |
| 285 | } |
| 286 | |
| 287 | static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci) |
| 288 | { |
| 289 | struct hlist_head *head; |
| 290 | struct atm_vcc *vcc = NULL; |
| 291 | struct hlist_node *node; |
| 292 | struct sock *s; |
| 293 | |
| 294 | read_lock(&vcc_sklist_lock); |
| 295 | head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)]; |
| 296 | sk_for_each(s, node, head) { |
| 297 | vcc = atm_sk(s); |
| 298 | if (vcc->dev == dev && vcc->vci == vci && |
| 299 | vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE) |
| 300 | goto out; |
| 301 | } |
| 302 | vcc = NULL; |
| 303 | out: |
| 304 | read_unlock(&vcc_sklist_lock); |
| 305 | return vcc; |
| 306 | } |
| 307 | |
| 308 | static int list_vccs(int vci) |
| 309 | { |
| 310 | struct hlist_head *head; |
| 311 | struct atm_vcc *vcc; |
| 312 | struct hlist_node *node; |
| 313 | struct sock *s; |
| 314 | int num_found = 0; |
| 315 | int i; |
| 316 | |
| 317 | read_lock(&vcc_sklist_lock); |
| 318 | if (vci != 0){ |
| 319 | head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)]; |
| 320 | sk_for_each(s, node, head) { |
| 321 | num_found ++; |
| 322 | vcc = atm_sk(s); |
| 323 | printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n", |
| 324 | vcc->dev->number, |
| 325 | vcc->vpi, |
| 326 | vcc->vci); |
| 327 | } |
| 328 | } else { |
| 329 | for(i=0; i<32; i++){ |
| 330 | head = &vcc_hash[i]; |
| 331 | sk_for_each(s, node, head) { |
| 332 | num_found ++; |
| 333 | vcc = atm_sk(s); |
| 334 | printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n", |
| 335 | vcc->dev->number, |
| 336 | vcc->vpi, |
| 337 | vcc->vci); |
| 338 | } |
| 339 | } |
| 340 | } |
| 341 | read_unlock(&vcc_sklist_lock); |
| 342 | return num_found; |
| 343 | } |
| 344 | |
| 345 | |
| 346 | static int popen(struct atm_vcc *vcc) |
| 347 | { |
| 348 | struct solos_card *card = vcc->dev->dev_data; |
| 349 | struct sk_buff *skb; |
| 350 | struct pkt_hdr *header; |
| 351 | |
| 352 | skb = alloc_skb(sizeof(*header), GFP_ATOMIC); |
| 353 | if (!skb && net_ratelimit()) { |
| 354 | dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n"); |
| 355 | return -ENOMEM; |
| 356 | } |
| 357 | header = (void *)skb_put(skb, sizeof(*header)); |
| 358 | |
| 359 | header->size = cpu_to_le16(sizeof(*header)); |
| 360 | header->vpi = cpu_to_le16(vcc->vpi); |
| 361 | header->vci = cpu_to_le16(vcc->vci); |
| 362 | header->type = cpu_to_le16(PKT_POPEN); |
| 363 | |
| 364 | fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL); |
| 365 | |
| 366 | // dev_dbg(&card->dev->dev, "Open for vpi %d and vci %d on interface %d\n", vcc->vpi, vcc->vci, SOLOS_CHAN(vcc->dev)); |
| 367 | set_bit(ATM_VF_ADDR, &vcc->flags); // accept the vpi / vci |
| 368 | set_bit(ATM_VF_READY, &vcc->flags); |
| 369 | list_vccs(0); |
| 370 | |
| 371 | if (!opens) |
| 372 | iowrite32(1, card->config_regs + IRQ_EN_ADDR); |
| 373 | |
| 374 | opens++; //count open PVCs |
| 375 | |
| 376 | return 0; |
| 377 | } |
| 378 | |
| 379 | static void pclose(struct atm_vcc *vcc) |
| 380 | { |
| 381 | struct solos_card *card = vcc->dev->dev_data; |
| 382 | struct sk_buff *skb; |
| 383 | struct pkt_hdr *header; |
| 384 | |
| 385 | skb = alloc_skb(sizeof(*header), GFP_ATOMIC); |
| 386 | if (!skb) { |
| 387 | dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n"); |
| 388 | return; |
| 389 | } |
| 390 | header = (void *)skb_put(skb, sizeof(*header)); |
| 391 | |
| 392 | header->size = cpu_to_le16(sizeof(*header)); |
| 393 | header->vpi = cpu_to_le16(vcc->vpi); |
| 394 | header->vci = cpu_to_le16(vcc->vci); |
| 395 | header->type = cpu_to_le16(PKT_PCLOSE); |
| 396 | |
| 397 | fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL); |
| 398 | |
| 399 | // dev_dbg(&card->dev->dev, "Close for vpi %d and vci %d on interface %d\n", vcc->vpi, vcc->vci, SOLOS_CHAN(vcc->dev)); |
| 400 | if (!--opens) |
| 401 | iowrite32(0, card->config_regs + IRQ_EN_ADDR); |
| 402 | |
| 403 | clear_bit(ATM_VF_ADDR, &vcc->flags); |
| 404 | clear_bit(ATM_VF_READY, &vcc->flags); |
| 405 | |
| 406 | return; |
| 407 | } |
| 408 | |
| 409 | static int print_buffer(struct sk_buff *buf) |
| 410 | { |
| 411 | int len,i; |
| 412 | char msg[500]; |
| 413 | char item[10]; |
| 414 | |
| 415 | len = buf->len; |
| 416 | for (i = 0; i < len; i++){ |
| 417 | if(i % 8 == 0) |
| 418 | sprintf(msg, "%02X: ", i); |
| 419 | |
| 420 | sprintf(item,"%02X ",*(buf->data + i)); |
| 421 | strcat(msg, item); |
| 422 | if(i % 8 == 7) { |
| 423 | sprintf(item, "\n"); |
| 424 | strcat(msg, item); |
| 425 | printk(KERN_DEBUG "%s", msg); |
| 426 | } |
| 427 | } |
| 428 | if (i % 8 != 0) { |
| 429 | sprintf(item, "\n"); |
| 430 | strcat(msg, item); |
| 431 | printk(KERN_DEBUG "%s", msg); |
| 432 | } |
| 433 | printk(KERN_DEBUG "\n"); |
| 434 | |
| 435 | return 0; |
| 436 | } |
| 437 | |
| 438 | static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb, |
| 439 | struct atm_vcc *vcc) |
| 440 | { |
| 441 | int old_len; |
| 442 | |
| 443 | *(void **)skb->cb = vcc; |
| 444 | |
| 445 | spin_lock(&card->tx_queue_lock); |
| 446 | old_len = skb_queue_len(&card->tx_queue[port]); |
| 447 | skb_queue_tail(&card->tx_queue[port], skb); |
| 448 | spin_unlock(&card->tx_queue_lock); |
| 449 | |
| 450 | /* If TX might need to be started, do so */ |
| 451 | if (!old_len) |
| 452 | fpga_tx(card); |
| 453 | } |
| 454 | |
| 455 | static int fpga_tx(struct solos_card *card) |
| 456 | { |
| 457 | uint32_t tx_pending; |
| 458 | uint32_t tx_started = 0; |
| 459 | struct sk_buff *skb; |
| 460 | struct atm_vcc *vcc; |
| 461 | unsigned char port; |
| 462 | unsigned long flags; |
| 463 | |
| 464 | spin_lock_irqsave(&card->tx_lock, flags); |
| 465 | |
| 466 | tx_pending = ioread32(card->config_regs + FLAGS_ADDR); |
| 467 | |
| 468 | dev_vdbg(&card->dev->dev, "TX Flags are %X\n", tx_pending); |
| 469 | |
| 470 | for (port = 0; port < card->nr_ports; port++) { |
| 471 | if (!(tx_pending & (1 << port))) { |
| 472 | |
| 473 | spin_lock(&card->tx_queue_lock); |
| 474 | skb = skb_dequeue(&card->tx_queue[port]); |
| 475 | spin_unlock(&card->tx_queue_lock); |
| 476 | |
| 477 | if (!skb) |
| 478 | continue; |
| 479 | |
| 480 | if (atmdebug) { |
| 481 | dev_info(&card->dev->dev, "Transmitted: port %d\n", |
| 482 | port); |
| 483 | print_buffer(skb); |
| 484 | } |
| 485 | memcpy_toio(TX_BUF(card, port), skb->data, skb->len); |
| 486 | |
| 487 | vcc = *(void **)skb->cb; |
| 488 | |
| 489 | if (vcc) { |
| 490 | atomic_inc(&vcc->stats->tx); |
| 491 | solos_pop(vcc, skb); |
| 492 | } else |
| 493 | dev_kfree_skb_irq(skb); |
| 494 | |
| 495 | tx_started |= 1 << port; //Set TX full flag |
| 496 | } |
| 497 | } |
| 498 | if (tx_started) |
| 499 | iowrite32(tx_started, card->config_regs + FLAGS_ADDR); |
| 500 | |
| 501 | spin_unlock_irqrestore(&card->tx_lock, flags); |
| 502 | return 0; |
| 503 | } |
| 504 | |
| 505 | static int psend(struct atm_vcc *vcc, struct sk_buff *skb) |
| 506 | { |
| 507 | struct solos_card *card = vcc->dev->dev_data; |
| 508 | struct sk_buff *skb2 = NULL; |
| 509 | struct pkt_hdr *header; |
| 510 | |
| 511 | //dev_dbg(&card->dev->dev, "psend called.\n"); |
| 512 | //dev_dbg(&card->dev->dev, "dev,vpi,vci = %d,%d,%d\n",SOLOS_CHAN(vcc->dev),vcc->vpi,vcc->vci); |
| 513 | |
| 514 | if (debug) { |
| 515 | skb2 = atm_alloc_charge(vcc, skb->len, GFP_ATOMIC); |
| 516 | if (skb2) { |
| 517 | memcpy(skb2->data, skb->data, skb->len); |
| 518 | skb_put(skb2, skb->len); |
| 519 | vcc->push(vcc, skb2); |
| 520 | atomic_inc(&vcc->stats->rx); |
| 521 | } |
| 522 | atomic_inc(&vcc->stats->tx); |
| 523 | solos_pop(vcc, skb); |
| 524 | return 0; |
| 525 | } |
| 526 | |
| 527 | if (skb->len > (BUF_SIZE - sizeof(*header))) { |
| 528 | dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n"); |
| 529 | solos_pop(vcc, skb); |
| 530 | return 0; |
| 531 | } |
| 532 | |
| 533 | if (!skb_clone_writable(skb, sizeof(*header))) { |
| 534 | int expand_by = 0; |
| 535 | int ret; |
| 536 | |
| 537 | if (skb_headroom(skb) < sizeof(*header)) |
| 538 | expand_by = sizeof(*header) - skb_headroom(skb); |
| 539 | |
| 540 | ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC); |
| 541 | if (ret) { |
| 542 | solos_pop(vcc, skb); |
| 543 | return ret; |
| 544 | } |
| 545 | } |
| 546 | |
| 547 | header = (void *)skb_push(skb, sizeof(*header)); |
| 548 | |
| 549 | header->size = cpu_to_le16(skb->len); |
| 550 | header->vpi = cpu_to_le16(vcc->vpi); |
| 551 | header->vci = cpu_to_le16(vcc->vci); |
| 552 | header->type = cpu_to_le16(PKT_DATA); |
| 553 | |
| 554 | fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc); |
| 555 | |
| 556 | return 0; |
| 557 | } |
| 558 | |
| 559 | static struct atmdev_ops fpga_ops = { |
| 560 | .open = popen, |
| 561 | .close = pclose, |
| 562 | .ioctl = NULL, |
| 563 | .getsockopt = NULL, |
| 564 | .setsockopt = NULL, |
| 565 | .send = psend, |
| 566 | .send_oam = NULL, |
| 567 | .phy_put = NULL, |
| 568 | .phy_get = NULL, |
| 569 | .change_qos = NULL, |
| 570 | .proc_read = NULL, |
| 571 | .owner = THIS_MODULE |
| 572 | }; |
| 573 | |
| 574 | static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| 575 | { |
| 576 | int err, i; |
| 577 | uint16_t fpga_ver; |
| 578 | uint8_t major_ver, minor_ver; |
| 579 | uint32_t data32; |
| 580 | struct solos_card *card; |
| 581 | |
| 582 | if (debug) |
| 583 | return 0; |
| 584 | |
| 585 | card = kzalloc(sizeof(*card), GFP_KERNEL); |
| 586 | if (!card) |
| 587 | return -ENOMEM; |
| 588 | |
| 589 | card->dev = dev; |
| 590 | |
| 591 | err = pci_enable_device(dev); |
| 592 | if (err) { |
| 593 | dev_warn(&dev->dev, "Failed to enable PCI device\n"); |
| 594 | goto out; |
| 595 | } |
| 596 | |
| 597 | err = pci_request_regions(dev, "solos"); |
| 598 | if (err) { |
| 599 | dev_warn(&dev->dev, "Failed to request regions\n"); |
| 600 | goto out; |
| 601 | } |
| 602 | |
| 603 | card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE); |
| 604 | if (!card->config_regs) { |
| 605 | dev_warn(&dev->dev, "Failed to ioremap config registers\n"); |
| 606 | goto out_release_regions; |
| 607 | } |
| 608 | card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE); |
| 609 | if (!card->buffers) { |
| 610 | dev_warn(&dev->dev, "Failed to ioremap data buffers\n"); |
| 611 | goto out_unmap_config; |
| 612 | } |
| 613 | |
| 614 | // for(i=0;i<64 ;i+=4){ |
| 615 | // data32=ioread32(card->buffers + i); |
| 616 | // dev_dbg(&card->dev->dev, "%08lX\n",(unsigned long)data32); |
| 617 | // } |
| 618 | |
| 619 | //Fill Config Mem with zeros |
| 620 | for(i = 0; i < 128; i += 4) |
| 621 | iowrite32(0, card->config_regs + i); |
| 622 | |
| 623 | //Set RX empty flags |
| 624 | iowrite32(0xF0, card->config_regs + FLAGS_ADDR); |
| 625 | |
| 626 | data32 = ioread32(card->config_regs + FPGA_VER); |
| 627 | fpga_ver = (data32 & 0x0000FFFF); |
| 628 | major_ver = ((data32 & 0xFF000000) >> 24); |
| 629 | minor_ver = ((data32 & 0x00FF0000) >> 16); |
| 630 | dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n", |
| 631 | major_ver, minor_ver, fpga_ver); |
| 632 | |
| 633 | card->nr_ports = 2; /* FIXME: Detect daughterboard */ |
| 634 | |
| 635 | err = atm_init(card); |
| 636 | if (err) |
| 637 | goto out_unmap_both; |
| 638 | |
| 639 | pci_set_drvdata(dev, card); |
| 640 | tasklet_init(&card->tlet, solos_bh, (unsigned long)card); |
| 641 | spin_lock_init(&card->tx_lock); |
| 642 | spin_lock_init(&card->tx_queue_lock); |
| 643 | spin_lock_init(&card->cli_queue_lock); |
| 644 | /* |
| 645 | // Set Loopback mode |
| 646 | data32 = 0x00010000; |
| 647 | iowrite32(data32,card->config_regs + FLAGS_ADDR); |
| 648 | */ |
| 649 | /* |
| 650 | // Fill Buffers with zeros |
| 651 | for (i = 0; i < BUF_SIZE * 8; i += 4) |
| 652 | iowrite32(0, card->buffers + i); |
| 653 | */ |
| 654 | /* |
| 655 | for(i = 0; i < (BUF_SIZE * 1); i += 4) |
| 656 | iowrite32(0x12345678, card->buffers + i + (0*BUF_SIZE)); |
| 657 | for(i = 0; i < (BUF_SIZE * 1); i += 4) |
| 658 | iowrite32(0xabcdef98, card->buffers + i + (1*BUF_SIZE)); |
| 659 | |
| 660 | // Read Config Memory |
| 661 | printk(KERN_DEBUG "Reading Config MEM\n"); |
| 662 | i = 0; |
| 663 | for(i = 0; i < 16; i++) { |
| 664 | data32=ioread32(card->buffers + i*(BUF_SIZE/2)); |
| 665 | printk(KERN_ALERT "Addr: %lX Data: %08lX\n", |
| 666 | (unsigned long)(addr_start + i*(BUF_SIZE/2)), |
| 667 | (unsigned long)data32); |
| 668 | } |
| 669 | */ |
| 670 | //dev_dbg(&card->dev->dev, "Requesting IRQ: %d\n",dev->irq); |
| 671 | err = request_irq(dev->irq, solos_irq, IRQF_DISABLED|IRQF_SHARED, |
| 672 | "solos-pci", card); |
| 673 | if (err) |
| 674 | dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq); |
| 675 | |
| 676 | // Enable IRQs |
| 677 | iowrite32(1, card->config_regs + IRQ_EN_ADDR); |
| 678 | |
| 679 | return 0; |
| 680 | |
| 681 | out_unmap_both: |
| 682 | pci_iounmap(dev, card->config_regs); |
| 683 | out_unmap_config: |
| 684 | pci_iounmap(dev, card->buffers); |
| 685 | out_release_regions: |
| 686 | pci_release_regions(dev); |
| 687 | out: |
| 688 | return err; |
| 689 | } |
| 690 | |
| 691 | static int atm_init(struct solos_card *card) |
| 692 | { |
| 693 | int i; |
| 694 | |
| 695 | opens = 0; |
| 696 | |
| 697 | for (i = 0; i < card->nr_ports; i++) { |
| 698 | skb_queue_head_init(&card->tx_queue[i]); |
| 699 | skb_queue_head_init(&card->cli_queue[i]); |
| 700 | |
| 701 | card->atmdev[i] = atm_dev_register("solos-pci", &fpga_ops, -1, NULL); |
| 702 | if (!card->atmdev[i]) { |
| 703 | dev_err(&card->dev->dev, "Could not register ATM device %d\n", i); |
| 704 | atm_remove(card); |
| 705 | return -ENODEV; |
| 706 | } |
| 707 | if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console)) |
| 708 | dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i); |
| 709 | |
| 710 | dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number); |
| 711 | |
| 712 | card->atmdev[i]->ci_range.vpi_bits = 8; |
| 713 | card->atmdev[i]->ci_range.vci_bits = 16; |
| 714 | card->atmdev[i]->dev_data = card; |
| 715 | card->atmdev[i]->phy_data = (void *)(unsigned long)i; |
| 716 | } |
| 717 | return 0; |
| 718 | } |
| 719 | |
| 720 | static void atm_remove(struct solos_card *card) |
| 721 | { |
| 722 | int i; |
| 723 | |
| 724 | for (i = 0; i < card->nr_ports; i++) { |
| 725 | if (card->atmdev[i]) { |
| 726 | dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number); |
| 727 | atm_dev_deregister(card->atmdev[i]); |
| 728 | } |
| 729 | } |
| 730 | } |
| 731 | |
| 732 | static void fpga_remove(struct pci_dev *dev) |
| 733 | { |
| 734 | struct solos_card *card = pci_get_drvdata(dev); |
| 735 | |
| 736 | if (debug) |
| 737 | return; |
| 738 | |
| 739 | atm_remove(card); |
| 740 | |
| 741 | dev_vdbg(&dev->dev, "Freeing IRQ\n"); |
| 742 | // Disable IRQs from FPGA |
| 743 | iowrite32(0, card->config_regs + IRQ_EN_ADDR); |
| 744 | free_irq(dev->irq, card); |
| 745 | tasklet_kill(&card->tlet); |
| 746 | |
| 747 | // iowrite32(0x01,pciregs); |
| 748 | dev_vdbg(&dev->dev, "Unmapping PCI resource\n"); |
| 749 | pci_iounmap(dev, card->buffers); |
| 750 | pci_iounmap(dev, card->config_regs); |
| 751 | |
| 752 | dev_vdbg(&dev->dev, "Releasing PCI Region\n"); |
| 753 | pci_release_regions(dev); |
| 754 | pci_disable_device(dev); |
| 755 | |
| 756 | pci_set_drvdata(dev, NULL); |
| 757 | kfree(card); |
| 758 | // dev_dbg(&card->dev->dev, "fpga_remove\n"); |
| 759 | return; |
| 760 | } |
| 761 | |
| 762 | static struct pci_device_id fpga_pci_tbl[] __devinitdata = { |
| 763 | { 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| 764 | { 0, } |
| 765 | }; |
| 766 | |
| 767 | MODULE_DEVICE_TABLE(pci,fpga_pci_tbl); |
| 768 | |
| 769 | static struct pci_driver fpga_driver = { |
| 770 | .name = "solos", |
| 771 | .id_table = fpga_pci_tbl, |
| 772 | .probe = fpga_probe, |
| 773 | .remove = fpga_remove, |
| 774 | }; |
| 775 | |
| 776 | |
| 777 | static int __init solos_pci_init(void) |
| 778 | { |
| 779 | printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION); |
| 780 | return pci_register_driver(&fpga_driver); |
| 781 | } |
| 782 | |
| 783 | static void __exit solos_pci_exit(void) |
| 784 | { |
| 785 | pci_unregister_driver(&fpga_driver); |
| 786 | printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION); |
| 787 | } |
| 788 | |
| 789 | module_init(solos_pci_init); |
| 790 | module_exit(solos_pci_exit); |