Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 1 | /* |
| 2 | * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T] |
| 3 | * |
| 4 | * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org> |
| 5 | * |
| 6 | * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ |
| 7 | * by Dany Salman <salmandany@yahoo.fr> |
| 8 | * Copyright (c) 2004 TDF |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License as published by |
| 12 | * the Free Software Foundation; either version 2 of the License, or |
| 13 | * (at your option) any later version. |
| 14 | * |
| 15 | * This program is distributed in the hope that it will be useful, |
| 16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 | * GNU General Public License for more details. |
| 19 | * |
| 20 | * You should have received a copy of the GNU General Public License |
| 21 | * along with this program; if not, write to the Free Software |
| 22 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 23 | * |
| 24 | */ |
| 25 | |
| 26 | #include <linux/i2c.h> |
| 27 | #include <linux/i2c-algo-bit.h> |
| 28 | #include <linux/init.h> |
| 29 | #include <linux/kernel.h> |
| 30 | #include <linux/module.h> |
| 31 | #include <linux/pci.h> |
| 32 | #include <linux/dma-mapping.h> |
Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 33 | #include <linux/slab.h> |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 34 | |
| 35 | #include "demux.h" |
| 36 | #include "dmxdev.h" |
| 37 | #include "dvb_demux.h" |
| 38 | #include "dvb_frontend.h" |
| 39 | #include "dvb_net.h" |
| 40 | #include "dvbdev.h" |
| 41 | #include "tda1004x.h" |
| 42 | |
Janne Grunau | 78e9200 | 2008-04-09 19:13:13 -0300 | [diff] [blame] | 43 | DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| 44 | |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 45 | #define DRIVER_NAME "pluto2" |
| 46 | |
| 47 | #define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */ |
| 48 | #define REG_PCAR 0x0020 /* PC address register */ |
| 49 | #define REG_TSCR 0x0024 /* TS ctrl & status */ |
| 50 | #define REG_MISC 0x0028 /* miscellaneous */ |
| 51 | #define REG_MMAC 0x002c /* MSB MAC address */ |
| 52 | #define REG_IMAC 0x0030 /* ISB MAC address */ |
| 53 | #define REG_LMAC 0x0034 /* LSB MAC address */ |
| 54 | #define REG_SPID 0x0038 /* SPI data */ |
| 55 | #define REG_SLCS 0x003c /* serial links ctrl/status */ |
| 56 | |
| 57 | #define PID0_NOFIL (0x0001 << 16) |
| 58 | #define PIDn_ENP (0x0001 << 15) |
| 59 | #define PID0_END (0x0001 << 14) |
| 60 | #define PID0_AFIL (0x0001 << 13) |
| 61 | #define PIDn_PID (0x1fff << 0) |
| 62 | |
| 63 | #define TSCR_NBPACKETS (0x00ff << 24) |
| 64 | #define TSCR_DEM (0x0001 << 17) |
| 65 | #define TSCR_DE (0x0001 << 16) |
| 66 | #define TSCR_RSTN (0x0001 << 15) |
| 67 | #define TSCR_MSKO (0x0001 << 14) |
| 68 | #define TSCR_MSKA (0x0001 << 13) |
| 69 | #define TSCR_MSKL (0x0001 << 12) |
| 70 | #define TSCR_OVR (0x0001 << 11) |
| 71 | #define TSCR_AFUL (0x0001 << 10) |
| 72 | #define TSCR_LOCK (0x0001 << 9) |
| 73 | #define TSCR_IACK (0x0001 << 8) |
| 74 | #define TSCR_ADEF (0x007f << 0) |
| 75 | |
| 76 | #define MISC_DVR (0x0fff << 4) |
| 77 | #define MISC_ALED (0x0001 << 3) |
| 78 | #define MISC_FRST (0x0001 << 2) |
| 79 | #define MISC_LED1 (0x0001 << 1) |
| 80 | #define MISC_LED0 (0x0001 << 0) |
| 81 | |
| 82 | #define SPID_SPIDR (0x00ff << 0) |
| 83 | |
| 84 | #define SLCS_SCL (0x0001 << 7) |
| 85 | #define SLCS_SDA (0x0001 << 6) |
| 86 | #define SLCS_CSN (0x0001 << 2) |
| 87 | #define SLCS_OVR (0x0001 << 1) |
| 88 | #define SLCS_SWC (0x0001 << 0) |
| 89 | |
| 90 | #define TS_DMA_PACKETS (8) |
| 91 | #define TS_DMA_BYTES (188 * TS_DMA_PACKETS) |
| 92 | |
| 93 | #define I2C_ADDR_TDA10046 0x10 |
| 94 | #define I2C_ADDR_TUA6034 0xc2 |
| 95 | #define NHWFILTERS 8 |
| 96 | |
| 97 | struct pluto { |
| 98 | /* pci */ |
| 99 | struct pci_dev *pdev; |
| 100 | u8 __iomem *io_mem; |
| 101 | |
| 102 | /* dvb */ |
| 103 | struct dmx_frontend hw_frontend; |
| 104 | struct dmx_frontend mem_frontend; |
| 105 | struct dmxdev dmxdev; |
| 106 | struct dvb_adapter dvb_adapter; |
| 107 | struct dvb_demux demux; |
| 108 | struct dvb_frontend *fe; |
| 109 | struct dvb_net dvbnet; |
| 110 | unsigned int full_ts_users; |
| 111 | unsigned int users; |
| 112 | |
| 113 | /* i2c */ |
| 114 | struct i2c_algo_bit_data i2c_bit; |
| 115 | struct i2c_adapter i2c_adap; |
| 116 | unsigned int i2cbug; |
| 117 | |
| 118 | /* irq */ |
| 119 | unsigned int overflow; |
Alan Cox | 0b61dca | 2009-03-26 17:47:48 -0300 | [diff] [blame] | 120 | unsigned int dead; |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 121 | |
| 122 | /* dma */ |
| 123 | dma_addr_t dma_addr; |
| 124 | u8 dma_buf[TS_DMA_BYTES]; |
| 125 | u8 dummy[4096]; |
| 126 | }; |
| 127 | |
| 128 | static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed) |
| 129 | { |
| 130 | return container_of(feed->demux, struct pluto, demux); |
| 131 | } |
| 132 | |
| 133 | static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe) |
| 134 | { |
| 135 | return container_of(fe->dvb, struct pluto, dvb_adapter); |
| 136 | } |
| 137 | |
| 138 | static inline u32 pluto_readreg(struct pluto *pluto, u32 reg) |
| 139 | { |
| 140 | return readl(&pluto->io_mem[reg]); |
| 141 | } |
| 142 | |
| 143 | static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val) |
| 144 | { |
| 145 | writel(val, &pluto->io_mem[reg]); |
| 146 | } |
| 147 | |
| 148 | static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits) |
| 149 | { |
| 150 | u32 val = readl(&pluto->io_mem[reg]); |
| 151 | val &= ~mask; |
| 152 | val |= bits; |
| 153 | writel(val, &pluto->io_mem[reg]); |
| 154 | } |
| 155 | |
Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 156 | static void pluto_write_tscr(struct pluto *pluto, u32 val) |
| 157 | { |
| 158 | /* set the number of packets */ |
| 159 | val &= ~TSCR_ADEF; |
| 160 | val |= TS_DMA_PACKETS / 2; |
| 161 | |
| 162 | pluto_writereg(pluto, REG_TSCR, val); |
| 163 | } |
| 164 | |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 165 | static void pluto_setsda(void *data, int state) |
| 166 | { |
| 167 | struct pluto *pluto = data; |
| 168 | |
| 169 | if (state) |
| 170 | pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA); |
| 171 | else |
| 172 | pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0); |
| 173 | } |
| 174 | |
| 175 | static void pluto_setscl(void *data, int state) |
| 176 | { |
| 177 | struct pluto *pluto = data; |
| 178 | |
| 179 | if (state) |
| 180 | pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL); |
| 181 | else |
| 182 | pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0); |
| 183 | |
| 184 | /* try to detect i2c_inb() to workaround hardware bug: |
| 185 | * reset SDA to high after SCL has been set to low */ |
| 186 | if ((state) && (pluto->i2cbug == 0)) { |
| 187 | pluto->i2cbug = 1; |
| 188 | } else { |
| 189 | if ((!state) && (pluto->i2cbug == 1)) |
| 190 | pluto_setsda(pluto, 1); |
| 191 | pluto->i2cbug = 0; |
| 192 | } |
| 193 | } |
| 194 | |
| 195 | static int pluto_getsda(void *data) |
| 196 | { |
| 197 | struct pluto *pluto = data; |
| 198 | |
| 199 | return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA; |
| 200 | } |
| 201 | |
| 202 | static int pluto_getscl(void *data) |
| 203 | { |
| 204 | struct pluto *pluto = data; |
| 205 | |
| 206 | return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL; |
| 207 | } |
| 208 | |
| 209 | static void pluto_reset_frontend(struct pluto *pluto, int reenable) |
| 210 | { |
| 211 | u32 val = pluto_readreg(pluto, REG_MISC); |
| 212 | |
| 213 | if (val & MISC_FRST) { |
| 214 | val &= ~MISC_FRST; |
| 215 | pluto_writereg(pluto, REG_MISC, val); |
| 216 | } |
| 217 | if (reenable) { |
| 218 | val |= MISC_FRST; |
| 219 | pluto_writereg(pluto, REG_MISC, val); |
| 220 | } |
| 221 | } |
| 222 | |
| 223 | static void pluto_reset_ts(struct pluto *pluto, int reenable) |
| 224 | { |
| 225 | u32 val = pluto_readreg(pluto, REG_TSCR); |
| 226 | |
| 227 | if (val & TSCR_RSTN) { |
| 228 | val &= ~TSCR_RSTN; |
Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 229 | pluto_write_tscr(pluto, val); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 230 | } |
| 231 | if (reenable) { |
| 232 | val |= TSCR_RSTN; |
Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 233 | pluto_write_tscr(pluto, val); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 234 | } |
| 235 | } |
| 236 | |
| 237 | static void pluto_set_dma_addr(struct pluto *pluto) |
| 238 | { |
Al Viro | 67778b3 | 2008-06-22 14:20:39 -0300 | [diff] [blame] | 239 | pluto_writereg(pluto, REG_PCAR, pluto->dma_addr); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 240 | } |
| 241 | |
| 242 | static int __devinit pluto_dma_map(struct pluto *pluto) |
| 243 | { |
| 244 | pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf, |
| 245 | TS_DMA_BYTES, PCI_DMA_FROMDEVICE); |
| 246 | |
FUJITA Tomonori | 8d8bb39 | 2008-07-25 19:44:49 -0700 | [diff] [blame] | 247 | return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 248 | } |
| 249 | |
| 250 | static void pluto_dma_unmap(struct pluto *pluto) |
| 251 | { |
| 252 | pci_unmap_single(pluto->pdev, pluto->dma_addr, |
| 253 | TS_DMA_BYTES, PCI_DMA_FROMDEVICE); |
| 254 | } |
| 255 | |
| 256 | static int pluto_start_feed(struct dvb_demux_feed *f) |
| 257 | { |
| 258 | struct pluto *pluto = feed_to_pluto(f); |
| 259 | |
| 260 | /* enable PID filtering */ |
| 261 | if (pluto->users++ == 0) |
| 262 | pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0); |
| 263 | |
| 264 | if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) |
| 265 | pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid); |
| 266 | else if (pluto->full_ts_users++ == 0) |
| 267 | pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL); |
| 268 | |
| 269 | return 0; |
| 270 | } |
| 271 | |
| 272 | static int pluto_stop_feed(struct dvb_demux_feed *f) |
| 273 | { |
| 274 | struct pluto *pluto = feed_to_pluto(f); |
| 275 | |
| 276 | /* disable PID filtering */ |
| 277 | if (--pluto->users == 0) |
| 278 | pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL); |
| 279 | |
| 280 | if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) |
| 281 | pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff); |
| 282 | else if (--pluto->full_ts_users == 0) |
| 283 | pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0); |
| 284 | |
| 285 | return 0; |
| 286 | } |
| 287 | |
| 288 | static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) |
| 289 | { |
| 290 | /* synchronize the DMA transfer with the CPU |
| 291 | * first so that we see updated contents. */ |
| 292 | pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr, |
| 293 | TS_DMA_BYTES, PCI_DMA_FROMDEVICE); |
| 294 | |
| 295 | /* Workaround for broken hardware: |
| 296 | * [1] On startup NBPACKETS seems to contain an uninitialized value, |
| 297 | * but no packets have been transfered. |
| 298 | * [2] Sometimes (actually very often) NBPACKETS stays at zero |
| 299 | * although one packet has been transfered. |
holger@muscate-magnussen.de | 4d84517 | 2007-05-01 09:25:56 -0300 | [diff] [blame] | 300 | * [3] Sometimes (actually rarely), the card gets into an erroneous |
| 301 | * mode where it continuously generates interrupts, claiming it |
| 302 | * has recieved nbpackets>TS_DMA_PACKETS packets, but no packet |
| 303 | * has been transfered. Only a reset seems to solve this |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 304 | */ |
| 305 | if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { |
Andreas Oberritter | 6573dd7 | 2005-11-08 21:35:14 -0800 | [diff] [blame] | 306 | unsigned int i = 0; |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 307 | while (pluto->dma_buf[i] == 0x47) |
| 308 | i += 188; |
Andreas Oberritter | 6573dd7 | 2005-11-08 21:35:14 -0800 | [diff] [blame] | 309 | nbpackets = i / 188; |
holger@muscate-magnussen.de | 4d84517 | 2007-05-01 09:25:56 -0300 | [diff] [blame] | 310 | if (i == 0) { |
| 311 | pluto_reset_ts(pluto, 1); |
| 312 | dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n"); |
| 313 | } |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 314 | } |
| 315 | |
| 316 | dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets); |
| 317 | |
| 318 | /* clear the dma buffer. this is needed to be able to identify |
| 319 | * new valid ts packets above */ |
| 320 | memset(pluto->dma_buf, 0, nbpackets * 188); |
| 321 | |
| 322 | /* reset the dma address */ |
| 323 | pluto_set_dma_addr(pluto); |
| 324 | |
| 325 | /* sync the buffer and give it back to the card */ |
| 326 | pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr, |
| 327 | TS_DMA_BYTES, PCI_DMA_FROMDEVICE); |
| 328 | } |
| 329 | |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 330 | static irqreturn_t pluto_irq(int irq, void *dev_id) |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 331 | { |
| 332 | struct pluto *pluto = dev_id; |
| 333 | u32 tscr; |
| 334 | |
| 335 | /* check whether an interrupt occured on this device */ |
| 336 | tscr = pluto_readreg(pluto, REG_TSCR); |
| 337 | if (!(tscr & (TSCR_DE | TSCR_OVR))) |
| 338 | return IRQ_NONE; |
| 339 | |
| 340 | if (tscr == 0xffffffff) { |
Alan Cox | 0b61dca | 2009-03-26 17:47:48 -0300 | [diff] [blame] | 341 | if (pluto->dead == 0) |
| 342 | dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n"); |
| 343 | /* It's dead Jim */ |
| 344 | pluto->dead = 1; |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 345 | return IRQ_HANDLED; |
| 346 | } |
| 347 | |
| 348 | /* dma end interrupt */ |
| 349 | if (tscr & TSCR_DE) { |
| 350 | pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24); |
| 351 | /* overflow interrupt */ |
| 352 | if (tscr & TSCR_OVR) |
| 353 | pluto->overflow++; |
| 354 | if (pluto->overflow) { |
| 355 | dev_err(&pluto->pdev->dev, "overflow irq (%d)\n", |
| 356 | pluto->overflow); |
| 357 | pluto_reset_ts(pluto, 1); |
| 358 | pluto->overflow = 0; |
| 359 | } |
| 360 | } else if (tscr & TSCR_OVR) { |
| 361 | pluto->overflow++; |
| 362 | } |
| 363 | |
| 364 | /* ACK the interrupt */ |
Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 365 | pluto_write_tscr(pluto, tscr | TSCR_IACK); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 366 | |
| 367 | return IRQ_HANDLED; |
| 368 | } |
| 369 | |
| 370 | static void __devinit pluto_enable_irqs(struct pluto *pluto) |
| 371 | { |
| 372 | u32 val = pluto_readreg(pluto, REG_TSCR); |
| 373 | |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 374 | /* disable AFUL and LOCK interrupts */ |
| 375 | val |= (TSCR_MSKA | TSCR_MSKL); |
| 376 | /* enable DMA and OVERFLOW interrupts */ |
| 377 | val &= ~(TSCR_DEM | TSCR_MSKO); |
| 378 | /* clear pending interrupts */ |
| 379 | val |= TSCR_IACK; |
| 380 | |
Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 381 | pluto_write_tscr(pluto, val); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 382 | } |
| 383 | |
| 384 | static void pluto_disable_irqs(struct pluto *pluto) |
| 385 | { |
| 386 | u32 val = pluto_readreg(pluto, REG_TSCR); |
| 387 | |
| 388 | /* disable all interrupts */ |
| 389 | val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL); |
| 390 | /* clear pending interrupts */ |
| 391 | val |= TSCR_IACK; |
| 392 | |
Andreas Oberritter | 1489f90 | 2007-04-02 10:44:35 -0300 | [diff] [blame] | 393 | pluto_write_tscr(pluto, val); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 394 | } |
| 395 | |
| 396 | static int __devinit pluto_hw_init(struct pluto *pluto) |
| 397 | { |
| 398 | pluto_reset_frontend(pluto, 1); |
| 399 | |
| 400 | /* set automatic LED control by FPGA */ |
| 401 | pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); |
| 402 | |
| 403 | /* set data endianess */ |
| 404 | #ifdef __LITTLE_ENDIAN |
| 405 | pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); |
| 406 | #else |
| 407 | pluto_rw(pluto, REG_PIDn(0), PID0_END, 0); |
| 408 | #endif |
| 409 | /* map DMA and set address */ |
| 410 | pluto_dma_map(pluto); |
| 411 | pluto_set_dma_addr(pluto); |
| 412 | |
| 413 | /* enable interrupts */ |
| 414 | pluto_enable_irqs(pluto); |
| 415 | |
| 416 | /* reset TS logic */ |
| 417 | pluto_reset_ts(pluto, 1); |
| 418 | |
| 419 | return 0; |
| 420 | } |
| 421 | |
| 422 | static void pluto_hw_exit(struct pluto *pluto) |
| 423 | { |
| 424 | /* disable interrupts */ |
| 425 | pluto_disable_irqs(pluto); |
| 426 | |
| 427 | pluto_reset_ts(pluto, 0); |
| 428 | |
| 429 | /* LED: disable automatic control, enable yellow, disable green */ |
| 430 | pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1); |
| 431 | |
| 432 | /* unmap DMA */ |
| 433 | pluto_dma_unmap(pluto); |
| 434 | |
| 435 | pluto_reset_frontend(pluto, 0); |
| 436 | } |
| 437 | |
| 438 | static inline u32 divide(u32 numerator, u32 denominator) |
| 439 | { |
| 440 | if (denominator == 0) |
| 441 | return ~0; |
| 442 | |
Julia Lawall | 75b697f | 2009-08-01 16:48:41 -0300 | [diff] [blame] | 443 | return DIV_ROUND_CLOSEST(numerator, denominator); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 444 | } |
| 445 | |
| 446 | /* LG Innotek TDTE-E001P (Infineon TUA6034) */ |
Andrew de Quincey | 4b4c915 | 2006-04-18 17:47:11 -0300 | [diff] [blame] | 447 | static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe, |
| 448 | struct dvb_frontend_parameters *p) |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 449 | { |
| 450 | struct pluto *pluto = frontend_to_pluto(fe); |
| 451 | struct i2c_msg msg; |
| 452 | int ret; |
| 453 | u8 buf[4]; |
| 454 | u32 div; |
| 455 | |
| 456 | // Fref = 166.667 Hz |
| 457 | // Fref * 3 = 500.000 Hz |
| 458 | // IF = 36166667 |
| 459 | // IF / Fref = 217 |
| 460 | //div = divide(p->frequency + 36166667, 166667); |
| 461 | div = divide(p->frequency * 3, 500000) + 217; |
| 462 | buf[0] = (div >> 8) & 0x7f; |
| 463 | buf[1] = (div >> 0) & 0xff; |
| 464 | |
| 465 | if (p->frequency < 611000000) |
| 466 | buf[2] = 0xb4; |
| 467 | else if (p->frequency < 811000000) |
| 468 | buf[2] = 0xbc; |
| 469 | else |
| 470 | buf[2] = 0xf4; |
| 471 | |
| 472 | // VHF: 174-230 MHz |
| 473 | // center: 350 MHz |
| 474 | // UHF: 470-862 MHz |
| 475 | if (p->frequency < 350000000) |
| 476 | buf[3] = 0x02; |
| 477 | else |
| 478 | buf[3] = 0x04; |
| 479 | |
| 480 | if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) |
| 481 | buf[3] |= 0x08; |
| 482 | |
| 483 | if (sizeof(buf) == 6) { |
| 484 | buf[4] = buf[2]; |
| 485 | buf[4] &= ~0x1c; |
| 486 | buf[4] |= 0x18; |
| 487 | |
| 488 | buf[5] = (0 << 7) | (2 << 4); |
| 489 | } |
| 490 | |
| 491 | msg.addr = I2C_ADDR_TUA6034 >> 1; |
| 492 | msg.flags = 0; |
| 493 | msg.buf = buf; |
| 494 | msg.len = sizeof(buf); |
| 495 | |
Patrick Boettcher | dea7486 | 2006-05-14 05:01:31 -0300 | [diff] [blame] | 496 | if (fe->ops.i2c_gate_ctrl) |
| 497 | fe->ops.i2c_gate_ctrl(fe, 1); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 498 | ret = i2c_transfer(&pluto->i2c_adap, &msg, 1); |
| 499 | if (ret < 0) |
| 500 | return ret; |
| 501 | else if (ret == 0) |
| 502 | return -EREMOTEIO; |
| 503 | |
| 504 | return 0; |
| 505 | } |
| 506 | |
| 507 | static int pluto2_request_firmware(struct dvb_frontend *fe, |
| 508 | const struct firmware **fw, char *name) |
| 509 | { |
| 510 | struct pluto *pluto = frontend_to_pluto(fe); |
| 511 | |
| 512 | return request_firmware(fw, name, &pluto->pdev->dev); |
| 513 | } |
| 514 | |
| 515 | static struct tda1004x_config pluto2_fe_config __devinitdata = { |
| 516 | .demod_address = I2C_ADDR_TDA10046 >> 1, |
| 517 | .invert = 1, |
| 518 | .invert_oclk = 0, |
| 519 | .xtal_freq = TDA10046_XTAL_16M, |
| 520 | .agc_config = TDA10046_AGC_DEFAULT, |
| 521 | .if_freq = TDA10046_FREQ_3617, |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 522 | .request_firmware = pluto2_request_firmware, |
| 523 | }; |
| 524 | |
| 525 | static int __devinit frontend_init(struct pluto *pluto) |
| 526 | { |
| 527 | int ret; |
| 528 | |
| 529 | pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap); |
| 530 | if (!pluto->fe) { |
| 531 | dev_err(&pluto->pdev->dev, "could not attach frontend\n"); |
| 532 | return -ENODEV; |
| 533 | } |
Patrick Boettcher | dea7486 | 2006-05-14 05:01:31 -0300 | [diff] [blame] | 534 | pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params; |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 535 | |
| 536 | ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe); |
| 537 | if (ret < 0) { |
Patrick Boettcher | dea7486 | 2006-05-14 05:01:31 -0300 | [diff] [blame] | 538 | if (pluto->fe->ops.release) |
| 539 | pluto->fe->ops.release(pluto->fe); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 540 | return ret; |
| 541 | } |
| 542 | |
| 543 | return 0; |
| 544 | } |
| 545 | |
| 546 | static void __devinit pluto_read_rev(struct pluto *pluto) |
| 547 | { |
| 548 | u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR; |
| 549 | dev_info(&pluto->pdev->dev, "board revision %d.%d\n", |
| 550 | (val >> 12) & 0x0f, (val >> 4) & 0xff); |
| 551 | } |
| 552 | |
| 553 | static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac) |
| 554 | { |
| 555 | u32 val = pluto_readreg(pluto, REG_MMAC); |
| 556 | mac[0] = (val >> 8) & 0xff; |
| 557 | mac[1] = (val >> 0) & 0xff; |
| 558 | |
| 559 | val = pluto_readreg(pluto, REG_IMAC); |
| 560 | mac[2] = (val >> 8) & 0xff; |
| 561 | mac[3] = (val >> 0) & 0xff; |
| 562 | |
| 563 | val = pluto_readreg(pluto, REG_LMAC); |
| 564 | mac[4] = (val >> 8) & 0xff; |
| 565 | mac[5] = (val >> 0) & 0xff; |
| 566 | |
Johannes Berg | 7c510e4 | 2008-10-27 17:47:26 -0700 | [diff] [blame] | 567 | dev_info(&pluto->pdev->dev, "MAC %pM\n", mac); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 568 | } |
| 569 | |
| 570 | static int __devinit pluto_read_serial(struct pluto *pluto) |
| 571 | { |
| 572 | struct pci_dev *pdev = pluto->pdev; |
| 573 | unsigned int i, j; |
| 574 | u8 __iomem *cis; |
| 575 | |
| 576 | cis = pci_iomap(pdev, 1, 0); |
| 577 | if (!cis) |
| 578 | return -EIO; |
| 579 | |
| 580 | dev_info(&pdev->dev, "S/N "); |
| 581 | |
| 582 | for (i = 0xe0; i < 0x100; i += 4) { |
| 583 | u32 val = readl(&cis[i]); |
| 584 | for (j = 0; j < 32; j += 8) { |
| 585 | if ((val & 0xff) == 0xff) |
| 586 | goto out; |
| 587 | printk("%c", val & 0xff); |
| 588 | val >>= 8; |
| 589 | } |
| 590 | } |
| 591 | out: |
| 592 | printk("\n"); |
| 593 | pci_iounmap(pdev, cis); |
| 594 | |
| 595 | return 0; |
| 596 | } |
| 597 | |
| 598 | static int __devinit pluto2_probe(struct pci_dev *pdev, |
| 599 | const struct pci_device_id *ent) |
| 600 | { |
| 601 | struct pluto *pluto; |
| 602 | struct dvb_adapter *dvb_adapter; |
| 603 | struct dvb_demux *dvbdemux; |
| 604 | struct dmx_demux *dmx; |
| 605 | int ret = -ENOMEM; |
| 606 | |
Panagiotis Issaris | 7408187 | 2006-01-11 19:40:56 -0200 | [diff] [blame] | 607 | pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 608 | if (!pluto) |
| 609 | goto out; |
| 610 | |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 611 | pluto->pdev = pdev; |
| 612 | |
| 613 | ret = pci_enable_device(pdev); |
| 614 | if (ret < 0) |
| 615 | goto err_kfree; |
| 616 | |
| 617 | /* enable interrupts */ |
| 618 | pci_write_config_dword(pdev, 0x6c, 0x8000); |
| 619 | |
Yang Hongyang | 284901a | 2009-04-06 19:01:15 -0700 | [diff] [blame] | 620 | ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 621 | if (ret < 0) |
| 622 | goto err_pci_disable_device; |
| 623 | |
| 624 | pci_set_master(pdev); |
| 625 | |
| 626 | ret = pci_request_regions(pdev, DRIVER_NAME); |
| 627 | if (ret < 0) |
| 628 | goto err_pci_disable_device; |
| 629 | |
| 630 | pluto->io_mem = pci_iomap(pdev, 0, 0x40); |
| 631 | if (!pluto->io_mem) { |
| 632 | ret = -EIO; |
| 633 | goto err_pci_release_regions; |
| 634 | } |
| 635 | |
| 636 | pci_set_drvdata(pdev, pluto); |
| 637 | |
Thomas Gleixner | 8076fe3 | 2006-07-01 19:29:37 -0700 | [diff] [blame] | 638 | ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 639 | if (ret < 0) |
| 640 | goto err_pci_iounmap; |
| 641 | |
| 642 | ret = pluto_hw_init(pluto); |
| 643 | if (ret < 0) |
| 644 | goto err_free_irq; |
| 645 | |
| 646 | /* i2c */ |
| 647 | i2c_set_adapdata(&pluto->i2c_adap, pluto); |
| 648 | strcpy(pluto->i2c_adap.name, DRIVER_NAME); |
| 649 | pluto->i2c_adap.owner = THIS_MODULE; |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 650 | pluto->i2c_adap.dev.parent = &pdev->dev; |
| 651 | pluto->i2c_adap.algo_data = &pluto->i2c_bit; |
| 652 | pluto->i2c_bit.data = pluto; |
| 653 | pluto->i2c_bit.setsda = pluto_setsda; |
| 654 | pluto->i2c_bit.setscl = pluto_setscl; |
| 655 | pluto->i2c_bit.getsda = pluto_getsda; |
| 656 | pluto->i2c_bit.getscl = pluto_getscl; |
| 657 | pluto->i2c_bit.udelay = 10; |
| 658 | pluto->i2c_bit.timeout = 10; |
| 659 | |
| 660 | /* Raise SCL and SDA */ |
| 661 | pluto_setsda(pluto, 1); |
| 662 | pluto_setscl(pluto, 1); |
| 663 | |
| 664 | ret = i2c_bit_add_bus(&pluto->i2c_adap); |
| 665 | if (ret < 0) |
| 666 | goto err_pluto_hw_exit; |
| 667 | |
| 668 | /* dvb */ |
Janne Grunau | 78e9200 | 2008-04-09 19:13:13 -0300 | [diff] [blame] | 669 | ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, |
| 670 | THIS_MODULE, &pdev->dev, adapter_nr); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 671 | if (ret < 0) |
Jean Delvare | 3269711 | 2006-12-10 21:21:33 +0100 | [diff] [blame] | 672 | goto err_i2c_del_adapter; |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 673 | |
| 674 | dvb_adapter = &pluto->dvb_adapter; |
| 675 | |
| 676 | pluto_read_rev(pluto); |
| 677 | pluto_read_serial(pluto); |
| 678 | pluto_read_mac(pluto, dvb_adapter->proposed_mac); |
| 679 | |
| 680 | dvbdemux = &pluto->demux; |
| 681 | dvbdemux->filternum = 256; |
| 682 | dvbdemux->feednum = 256; |
| 683 | dvbdemux->start_feed = pluto_start_feed; |
| 684 | dvbdemux->stop_feed = pluto_stop_feed; |
| 685 | dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | |
| 686 | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); |
| 687 | ret = dvb_dmx_init(dvbdemux); |
| 688 | if (ret < 0) |
| 689 | goto err_dvb_unregister_adapter; |
| 690 | |
| 691 | dmx = &dvbdemux->dmx; |
| 692 | |
| 693 | pluto->hw_frontend.source = DMX_FRONTEND_0; |
| 694 | pluto->mem_frontend.source = DMX_MEMORY_FE; |
| 695 | pluto->dmxdev.filternum = NHWFILTERS; |
| 696 | pluto->dmxdev.demux = dmx; |
| 697 | |
| 698 | ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter); |
| 699 | if (ret < 0) |
| 700 | goto err_dvb_dmx_release; |
| 701 | |
| 702 | ret = dmx->add_frontend(dmx, &pluto->hw_frontend); |
| 703 | if (ret < 0) |
| 704 | goto err_dvb_dmxdev_release; |
| 705 | |
| 706 | ret = dmx->add_frontend(dmx, &pluto->mem_frontend); |
| 707 | if (ret < 0) |
| 708 | goto err_remove_hw_frontend; |
| 709 | |
| 710 | ret = dmx->connect_frontend(dmx, &pluto->hw_frontend); |
| 711 | if (ret < 0) |
| 712 | goto err_remove_mem_frontend; |
| 713 | |
| 714 | ret = frontend_init(pluto); |
| 715 | if (ret < 0) |
| 716 | goto err_disconnect_frontend; |
| 717 | |
| 718 | dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx); |
| 719 | out: |
| 720 | return ret; |
| 721 | |
| 722 | err_disconnect_frontend: |
| 723 | dmx->disconnect_frontend(dmx); |
| 724 | err_remove_mem_frontend: |
| 725 | dmx->remove_frontend(dmx, &pluto->mem_frontend); |
| 726 | err_remove_hw_frontend: |
| 727 | dmx->remove_frontend(dmx, &pluto->hw_frontend); |
| 728 | err_dvb_dmxdev_release: |
| 729 | dvb_dmxdev_release(&pluto->dmxdev); |
| 730 | err_dvb_dmx_release: |
| 731 | dvb_dmx_release(dvbdemux); |
| 732 | err_dvb_unregister_adapter: |
| 733 | dvb_unregister_adapter(dvb_adapter); |
Jean Delvare | 3269711 | 2006-12-10 21:21:33 +0100 | [diff] [blame] | 734 | err_i2c_del_adapter: |
| 735 | i2c_del_adapter(&pluto->i2c_adap); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 736 | err_pluto_hw_exit: |
| 737 | pluto_hw_exit(pluto); |
| 738 | err_free_irq: |
| 739 | free_irq(pdev->irq, pluto); |
| 740 | err_pci_iounmap: |
| 741 | pci_iounmap(pdev, pluto->io_mem); |
| 742 | err_pci_release_regions: |
| 743 | pci_release_regions(pdev); |
| 744 | err_pci_disable_device: |
| 745 | pci_disable_device(pdev); |
| 746 | err_kfree: |
| 747 | pci_set_drvdata(pdev, NULL); |
| 748 | kfree(pluto); |
| 749 | goto out; |
| 750 | } |
| 751 | |
| 752 | static void __devexit pluto2_remove(struct pci_dev *pdev) |
| 753 | { |
| 754 | struct pluto *pluto = pci_get_drvdata(pdev); |
| 755 | struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter; |
| 756 | struct dvb_demux *dvbdemux = &pluto->demux; |
| 757 | struct dmx_demux *dmx = &dvbdemux->dmx; |
| 758 | |
| 759 | dmx->close(dmx); |
| 760 | dvb_net_release(&pluto->dvbnet); |
| 761 | if (pluto->fe) |
| 762 | dvb_unregister_frontend(pluto->fe); |
| 763 | |
| 764 | dmx->disconnect_frontend(dmx); |
| 765 | dmx->remove_frontend(dmx, &pluto->mem_frontend); |
| 766 | dmx->remove_frontend(dmx, &pluto->hw_frontend); |
| 767 | dvb_dmxdev_release(&pluto->dmxdev); |
| 768 | dvb_dmx_release(dvbdemux); |
| 769 | dvb_unregister_adapter(dvb_adapter); |
Jean Delvare | 3269711 | 2006-12-10 21:21:33 +0100 | [diff] [blame] | 770 | i2c_del_adapter(&pluto->i2c_adap); |
Andreas Oberritter | c7cadb3 | 2005-07-07 17:57:46 -0700 | [diff] [blame] | 771 | pluto_hw_exit(pluto); |
| 772 | free_irq(pdev->irq, pluto); |
| 773 | pci_iounmap(pdev, pluto->io_mem); |
| 774 | pci_release_regions(pdev); |
| 775 | pci_disable_device(pdev); |
| 776 | pci_set_drvdata(pdev, NULL); |
| 777 | kfree(pluto); |
| 778 | } |
| 779 | |
| 780 | #ifndef PCI_VENDOR_ID_SCM |
| 781 | #define PCI_VENDOR_ID_SCM 0x0432 |
| 782 | #endif |
| 783 | #ifndef PCI_DEVICE_ID_PLUTO2 |
| 784 | #define PCI_DEVICE_ID_PLUTO2 0x0001 |
| 785 | #endif |
| 786 | |
| 787 | static struct pci_device_id pluto2_id_table[] __devinitdata = { |
| 788 | { |
| 789 | .vendor = PCI_VENDOR_ID_SCM, |
| 790 | .device = PCI_DEVICE_ID_PLUTO2, |
| 791 | .subvendor = PCI_ANY_ID, |
| 792 | .subdevice = PCI_ANY_ID, |
| 793 | }, { |
| 794 | /* empty */ |
| 795 | }, |
| 796 | }; |
| 797 | |
| 798 | MODULE_DEVICE_TABLE(pci, pluto2_id_table); |
| 799 | |
| 800 | static struct pci_driver pluto2_driver = { |
| 801 | .name = DRIVER_NAME, |
| 802 | .id_table = pluto2_id_table, |
| 803 | .probe = pluto2_probe, |
| 804 | .remove = __devexit_p(pluto2_remove), |
| 805 | }; |
| 806 | |
| 807 | static int __init pluto2_init(void) |
| 808 | { |
| 809 | return pci_register_driver(&pluto2_driver); |
| 810 | } |
| 811 | |
| 812 | static void __exit pluto2_exit(void) |
| 813 | { |
| 814 | pci_unregister_driver(&pluto2_driver); |
| 815 | } |
| 816 | |
| 817 | module_init(pluto2_init); |
| 818 | module_exit(pluto2_exit); |
| 819 | |
| 820 | MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); |
| 821 | MODULE_DESCRIPTION("Pluto2 driver"); |
| 822 | MODULE_LICENSE("GPL"); |