blob: c621d762bb2c9d18fd4ccda585c78491cafb1730 [file] [log] [blame]
Dave Jiangc0d12172007-07-19 01:49:46 -07001/*
2 * Generic EDAC defs
3 *
4 * Author: Dave Jiang <djiang@mvista.com>
5 *
Hitoshi Mitakec3c52bc2008-04-29 01:03:18 -07006 * 2006-2008 (c) MontaVista Software, Inc. This file is licensed under
Dave Jiangc0d12172007-07-19 01:49:46 -07007 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
10 *
11 */
12#ifndef _LINUX_EDAC_H_
13#define _LINUX_EDAC_H_
14
Arun Sharma60063492011-07-26 16:09:06 -070015#include <linux/atomic.h>
Paul Gortmaker313162d2012-01-30 11:46:54 -050016#include <linux/kobject.h>
17#include <linux/completion.h>
18#include <linux/workqueue.h>
19
20struct device;
Dave Jiangc0d12172007-07-19 01:49:46 -070021
22#define EDAC_OPSTATE_INVAL -1
23#define EDAC_OPSTATE_POLL 0
24#define EDAC_OPSTATE_NMI 1
25#define EDAC_OPSTATE_INT 2
26
27extern int edac_op_state;
Dave Jiang66ee2f92007-07-19 01:49:54 -070028extern int edac_err_assert;
Dave Jiangc0d12172007-07-19 01:49:46 -070029extern atomic_t edac_handlers;
Kay Sieversfe5ff8b2011-12-14 15:21:07 -080030extern struct bus_type edac_subsys;
Dave Jiangc0d12172007-07-19 01:49:46 -070031
32extern int edac_handler_set(void);
33extern void edac_atomic_assert_error(void);
Kay Sieversfe5ff8b2011-12-14 15:21:07 -080034extern struct bus_type *edac_get_sysfs_subsys(void);
35extern void edac_put_sysfs_subsys(void);
Dave Jiangc0d12172007-07-19 01:49:46 -070036
Hitoshi Mitakec3c52bc2008-04-29 01:03:18 -070037static inline void opstate_init(void)
38{
39 switch (edac_op_state) {
40 case EDAC_OPSTATE_POLL:
41 case EDAC_OPSTATE_NMI:
42 break;
43 default:
44 edac_op_state = EDAC_OPSTATE_POLL;
45 }
46 return;
47}
48
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -030049#define EDAC_MC_LABEL_LEN 31
50#define MC_PROC_NAME_MAX_LEN 7
51
52/* memory devices */
53enum dev_type {
54 DEV_UNKNOWN = 0,
55 DEV_X1,
56 DEV_X2,
57 DEV_X4,
58 DEV_X8,
59 DEV_X16,
60 DEV_X32, /* Do these parts exist? */
61 DEV_X64 /* Do these parts exist? */
62};
63
64#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN)
65#define DEV_FLAG_X1 BIT(DEV_X1)
66#define DEV_FLAG_X2 BIT(DEV_X2)
67#define DEV_FLAG_X4 BIT(DEV_X4)
68#define DEV_FLAG_X8 BIT(DEV_X8)
69#define DEV_FLAG_X16 BIT(DEV_X16)
70#define DEV_FLAG_X32 BIT(DEV_X32)
71#define DEV_FLAG_X64 BIT(DEV_X64)
72
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -030073/**
74 * enum mem_type - memory types. For a more detailed reference, please see
75 * http://en.wikipedia.org/wiki/DRAM
76 *
77 * @MEM_EMPTY Empty csrow
78 * @MEM_RESERVED: Reserved csrow type
79 * @MEM_UNKNOWN: Unknown csrow type
80 * @MEM_FPM: FPM - Fast Page Mode, used on systems up to 1995.
81 * @MEM_EDO: EDO - Extended data out, used on systems up to 1998.
82 * @MEM_BEDO: BEDO - Burst Extended data out, an EDO variant.
83 * @MEM_SDR: SDR - Single data rate SDRAM
84 * http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory
85 * They use 3 pins for chip select: Pins 0 and 2 are
86 * for rank 0; pins 1 and 3 are for rank 1, if the memory
87 * is dual-rank.
88 * @MEM_RDR: Registered SDR SDRAM
89 * @MEM_DDR: Double data rate SDRAM
90 * http://en.wikipedia.org/wiki/DDR_SDRAM
91 * @MEM_RDDR: Registered Double data rate SDRAM
92 * This is a variant of the DDR memories.
93 * A registered memory has a buffer inside it, hiding
94 * part of the memory details to the memory controller.
95 * @MEM_RMBS: Rambus DRAM, used on a few Pentium III/IV controllers.
96 * @MEM_DDR2: DDR2 RAM, as described at JEDEC JESD79-2F.
97 * Those memories are labed as "PC2-" instead of "PC" to
98 * differenciate from DDR.
99 * @MEM_FB_DDR2: Fully-Buffered DDR2, as described at JEDEC Std No. 205
100 * and JESD206.
101 * Those memories are accessed per DIMM slot, and not by
102 * a chip select signal.
103 * @MEM_RDDR2: Registered DDR2 RAM
104 * This is a variant of the DDR2 memories.
105 * @MEM_XDR: Rambus XDR
106 * It is an evolution of the original RAMBUS memories,
107 * created to compete with DDR2. Weren't used on any
108 * x86 arch, but cell_edac PPC memory controller uses it.
109 * @MEM_DDR3: DDR3 RAM
110 * @MEM_RDDR3: Registered DDR3 RAM
111 * This is a variant of the DDR3 memories.
112 */
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300113enum mem_type {
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300114 MEM_EMPTY = 0,
115 MEM_RESERVED,
116 MEM_UNKNOWN,
117 MEM_FPM,
118 MEM_EDO,
119 MEM_BEDO,
120 MEM_SDR,
121 MEM_RDR,
122 MEM_DDR,
123 MEM_RDDR,
124 MEM_RMBS,
125 MEM_DDR2,
126 MEM_FB_DDR2,
127 MEM_RDDR2,
128 MEM_XDR,
129 MEM_DDR3,
130 MEM_RDDR3,
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300131};
132
133#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
134#define MEM_FLAG_RESERVED BIT(MEM_RESERVED)
135#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN)
136#define MEM_FLAG_FPM BIT(MEM_FPM)
137#define MEM_FLAG_EDO BIT(MEM_EDO)
138#define MEM_FLAG_BEDO BIT(MEM_BEDO)
139#define MEM_FLAG_SDR BIT(MEM_SDR)
140#define MEM_FLAG_RDR BIT(MEM_RDR)
141#define MEM_FLAG_DDR BIT(MEM_DDR)
142#define MEM_FLAG_RDDR BIT(MEM_RDDR)
143#define MEM_FLAG_RMBS BIT(MEM_RMBS)
144#define MEM_FLAG_DDR2 BIT(MEM_DDR2)
145#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
146#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
147#define MEM_FLAG_XDR BIT(MEM_XDR)
148#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
149#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
150
151/* chipset Error Detection and Correction capabilities and mode */
152enum edac_type {
153 EDAC_UNKNOWN = 0, /* Unknown if ECC is available */
154 EDAC_NONE, /* Doesn't support ECC */
155 EDAC_RESERVED, /* Reserved ECC type */
156 EDAC_PARITY, /* Detects parity errors */
157 EDAC_EC, /* Error Checking - no correction */
158 EDAC_SECDED, /* Single bit error correction, Double detection */
159 EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */
160 EDAC_S4ECD4ED, /* Chipkill x4 devices */
161 EDAC_S8ECD8ED, /* Chipkill x8 devices */
162 EDAC_S16ECD16ED, /* Chipkill x16 devices */
163};
164
165#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN)
166#define EDAC_FLAG_NONE BIT(EDAC_NONE)
167#define EDAC_FLAG_PARITY BIT(EDAC_PARITY)
168#define EDAC_FLAG_EC BIT(EDAC_EC)
169#define EDAC_FLAG_SECDED BIT(EDAC_SECDED)
170#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED)
171#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED)
172#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED)
173#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED)
174
175/* scrubbing capabilities */
176enum scrub_type {
177 SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */
178 SCRUB_NONE, /* No scrubber */
179 SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */
180 SCRUB_SW_SRC, /* Software scrub only errors */
181 SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */
182 SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */
183 SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */
184 SCRUB_HW_SRC, /* Hardware scrub only errors */
185 SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */
186 SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */
187};
188
189#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG)
190#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC)
191#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC)
192#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE)
193#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG)
194#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC)
195#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC)
196#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE)
197
198/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
199
200/* EDAC internal operation states */
201#define OP_ALLOC 0x100
202#define OP_RUNNING_POLL 0x201
203#define OP_RUNNING_INTERRUPT 0x202
204#define OP_RUNNING_POLL_INTR 0x203
205#define OP_OFFLINE 0x300
206
207/*
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300208 * Concepts used at the EDAC subsystem
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300209 *
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300210 * There are several things to be aware of that aren't at all obvious:
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300211 *
212 * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
213 *
214 * These are some of the many terms that are thrown about that don't always
215 * mean what people think they mean (Inconceivable!). In the interest of
216 * creating a common ground for discussion, terms and their definitions
217 * will be established.
218 *
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300219 * Memory devices: The individual DRAM chips on a memory stick. These
220 * devices commonly output 4 and 8 bits each (x4, x8).
221 * Grouping several of these in parallel provides the
222 * number of bits that the memory controller expects:
223 * typically 72 bits, in order to provide 64 bits +
224 * 8 bits of ECC data.
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300225 *
226 * Memory Stick: A printed circuit board that aggregates multiple
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300227 * memory devices in parallel. In general, this is the
228 * Field Replaceable Unit (FRU) which gets replaced, in
229 * the case of excessive errors. Most often it is also
230 * called DIMM (Dual Inline Memory Module).
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300231 *
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300232 * Memory Socket: A physical connector on the motherboard that accepts
233 * a single memory stick. Also called as "slot" on several
234 * datasheets.
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300235 *
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300236 * Channel: A memory controller channel, responsible to communicate
237 * with a group of DIMMs. Each channel has its own
238 * independent control (command) and data bus, and can
239 * be used independently or grouped with other channels.
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300240 *
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300241 * Branch: It is typically the highest hierarchy on a
242 * Fully-Buffered DIMM memory controller.
243 * Typically, it contains two channels.
244 * Two channels at the same branch can be used in single
245 * mode or in lockstep mode.
246 * When lockstep is enabled, the cacheline is doubled,
247 * but it generally brings some performance penalty.
248 * Also, it is generally not possible to point to just one
249 * memory stick when an error occurs, as the error
250 * correction code is calculated using two DIMMs instead
251 * of one. Due to that, it is capable of correcting more
252 * errors than on single mode.
253 *
254 * Single-channel: The data accessed by the memory controller is contained
255 * into one dimm only. E. g. if the data is 64 bits-wide,
256 * the data flows to the CPU using one 64 bits parallel
257 * access.
258 * Typically used with SDR, DDR, DDR2 and DDR3 memories.
259 * FB-DIMM and RAMBUS use a different concept for channel,
260 * so this concept doesn't apply there.
261 *
262 * Double-channel: The data size accessed by the memory controller is
263 * interlaced into two dimms, accessed at the same time.
264 * E. g. if the DIMM is 64 bits-wide (72 bits with ECC),
265 * the data flows to the CPU using a 128 bits parallel
266 * access.
267 *
268 * Chip-select row: This is the name of the DRAM signal used to select the
269 * DRAM ranks to be accessed. Common chip-select rows for
270 * single channel are 64 bits, for dual channel 128 bits.
271 * It may not be visible by the memory controller, as some
272 * DIMM types have a memory buffer that can hide direct
273 * access to it from the Memory Controller.
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300274 *
275 * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
276 * Motherboards commonly drive two chip-select pins to
277 * a memory stick. A single-ranked stick, will occupy
278 * only one of those rows. The other will be unused.
279 *
280 * Double-Ranked stick: A double-ranked stick has two chip-select rows which
281 * access different sets of memory devices. The two
282 * rows cannot be accessed concurrently.
283 *
284 * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick.
285 * A double-sided stick has two chip-select rows which
Mauro Carvalho Chehab01a6e282012-02-03 13:17:48 -0300286 * access different sets of memory devices. The two
287 * rows cannot be accessed concurrently. "Double-sided"
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300288 * is irrespective of the memory devices being mounted
289 * on both sides of the memory stick.
290 *
291 * Socket set: All of the memory sticks that are required for
292 * a single memory access or all of the memory sticks
293 * spanned by a chip-select row. A single socket set
294 * has two chip-select rows and if double-sided sticks
295 * are used these will occupy those chip-select rows.
296 *
297 * Bank: This term is avoided because it is unclear when
298 * needing to distinguish between chip-select rows and
299 * socket sets.
300 *
301 * Controller pages:
302 *
303 * Physical pages:
304 *
305 * Virtual pages:
306 *
307 *
308 * STRUCTURE ORGANIZATION AND CHOICES
309 *
310 *
311 *
312 * PS - I enjoyed writing all that about as much as you enjoyed reading it.
313 */
314
Mauro Carvalho Chehaba4b4be32012-01-27 10:26:13 -0300315/**
316 * struct rank_info - contains the information for one DIMM rank
317 *
318 * @chan_idx: channel number where the rank is (typically, 0 or 1)
319 * @ce_count: number of correctable errors for this rank
320 * @label: DIMM label. Different ranks for the same DIMM should be
321 * filled, on userspace, with the same label.
322 * FIXME: The core currently won't enforce it.
323 * @csrow: A pointer to the chip select row structure (the parent
324 * structure). The location of the rank is given by
325 * the (csrow->csrow_idx, chan_idx) vector.
326 */
327struct rank_info {
328 int chan_idx;
329 u32 ce_count;
330 char label[EDAC_MC_LABEL_LEN + 1];
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300331 struct csrow_info *csrow; /* the parent */
332};
333
334struct csrow_info {
335 unsigned long first_page; /* first page number in dimm */
336 unsigned long last_page; /* last page number in dimm */
337 unsigned long page_mask; /* used for interleaving -
338 * 0UL for non intlv
339 */
340 u32 nr_pages; /* number of pages in csrow */
341 u32 grain; /* granularity of reported error in bytes */
342 int csrow_idx; /* the chip-select row */
343 enum dev_type dtype; /* memory device type */
344 u32 ue_count; /* Uncorrectable Errors for this csrow */
345 u32 ce_count; /* Correctable Errors for this csrow */
346 enum mem_type mtype; /* memory csrow type */
347 enum edac_type edac_mode; /* EDAC mode for this csrow */
348 struct mem_ctl_info *mci; /* the parent */
349
350 struct kobject kobj; /* sysfs kobject for this csrow */
351
352 /* channel information for this csrow */
353 u32 nr_channels;
Mauro Carvalho Chehaba4b4be32012-01-27 10:26:13 -0300354 struct rank_info *channels;
Mauro Carvalho Chehabddeb3542011-03-04 15:11:29 -0300355};
356
357struct mcidev_sysfs_group {
358 const char *name; /* group name */
359 const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
360};
361
362struct mcidev_sysfs_group_kobj {
363 struct list_head list; /* list for all instances within a mc */
364
365 struct kobject kobj; /* kobj for the group */
366
367 const struct mcidev_sysfs_group *grp; /* group description table */
368 struct mem_ctl_info *mci; /* the parent */
369};
370
371/* mcidev_sysfs_attribute structure
372 * used for driver sysfs attributes and in mem_ctl_info
373 * sysfs top level entries
374 */
375struct mcidev_sysfs_attribute {
376 /* It should use either attr or grp */
377 struct attribute attr;
378 const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */
379
380 /* Ops for show/store values at the attribute - not used on group */
381 ssize_t (*show)(struct mem_ctl_info *,char *);
382 ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
383};
384
385/* MEMORY controller information structure
386 */
387struct mem_ctl_info {
388 struct list_head link; /* for global list of mem_ctl_info structs */
389
390 struct module *owner; /* Module owner of this control struct */
391
392 unsigned long mtype_cap; /* memory types supported by mc */
393 unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */
394 unsigned long edac_cap; /* configuration capabilities - this is
395 * closely related to edac_ctl_cap. The
396 * difference is that the controller may be
397 * capable of s4ecd4ed which would be listed
398 * in edac_ctl_cap, but if channels aren't
399 * capable of s4ecd4ed then the edac_cap would
400 * not have that capability.
401 */
402 unsigned long scrub_cap; /* chipset scrub capabilities */
403 enum scrub_type scrub_mode; /* current scrub mode */
404
405 /* Translates sdram memory scrub rate given in bytes/sec to the
406 internal representation and configures whatever else needs
407 to be configured.
408 */
409 int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
410
411 /* Get the current sdram memory scrub rate from the internal
412 representation and converts it to the closest matching
413 bandwidth in bytes/sec.
414 */
415 int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
416
417
418 /* pointer to edac checking routine */
419 void (*edac_check) (struct mem_ctl_info * mci);
420
421 /*
422 * Remaps memory pages: controller pages to physical pages.
423 * For most MC's, this will be NULL.
424 */
425 /* FIXME - why not send the phys page to begin with? */
426 unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
427 unsigned long page);
428 int mc_idx;
429 int nr_csrows;
430 struct csrow_info *csrows;
431 /*
432 * FIXME - what about controllers on other busses? - IDs must be
433 * unique. dev pointer should be sufficiently unique, but
434 * BUS:SLOT.FUNC numbers may not be unique.
435 */
436 struct device *dev;
437 const char *mod_name;
438 const char *mod_ver;
439 const char *ctl_name;
440 const char *dev_name;
441 char proc_name[MC_PROC_NAME_MAX_LEN + 1];
442 void *pvt_info;
443 u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */
444 u32 ce_noinfo_count; /* Correctable Errors w/o info */
445 u32 ue_count; /* Total Uncorrectable Errors for this MC */
446 u32 ce_count; /* Total Correctable Errors for this MC */
447 unsigned long start_time; /* mci load start time (in jiffies) */
448
449 struct completion complete;
450
451 /* edac sysfs device control */
452 struct kobject edac_mci_kobj;
453
454 /* list for all grp instances within a mc */
455 struct list_head grp_kobj_list;
456
457 /* Additional top controller level attributes, but specified
458 * by the low level driver.
459 *
460 * Set by the low level driver to provide attributes at the
461 * controller level, same level as 'ue_count' and 'ce_count' above.
462 * An array of structures, NULL terminated
463 *
464 * If attributes are desired, then set to array of attributes
465 * If no attributes are desired, leave NULL
466 */
467 const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
468
469 /* work struct for this MC */
470 struct delayed_work work;
471
472 /* the internal state of this controller instance */
473 int op_state;
474};
475
Dave Jiangc0d12172007-07-19 01:49:46 -0700476#endif