Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 1 | /* |
Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 2 | * Touchkey driver for MELFAS MCS5000/5080 controller |
Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 3 | * |
| 4 | * Copyright (C) 2010 Samsung Electronics Co.Ltd |
| 5 | * Author: HeungJun Kim <riverful.kim@samsung.com> |
| 6 | * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify it |
| 9 | * under the terms of the GNU General Public License as published by the |
| 10 | * Free Software Foundation; either version 2 of the License, or (at your |
| 11 | * option) any later version. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/init.h> |
| 16 | #include <linux/i2c.h> |
| 17 | #include <linux/i2c/mcs.h> |
| 18 | #include <linux/interrupt.h> |
| 19 | #include <linux/input.h> |
| 20 | #include <linux/irq.h> |
| 21 | #include <linux/slab.h> |
Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 22 | #include <linux/pm.h> |
Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 23 | |
| 24 | /* MCS5000 Touchkey */ |
| 25 | #define MCS5000_TOUCHKEY_STATUS 0x04 |
| 26 | #define MCS5000_TOUCHKEY_STATUS_PRESS 7 |
| 27 | #define MCS5000_TOUCHKEY_FW 0x0a |
| 28 | #define MCS5000_TOUCHKEY_BASE_VAL 0x61 |
| 29 | |
| 30 | /* MCS5080 Touchkey */ |
| 31 | #define MCS5080_TOUCHKEY_STATUS 0x00 |
| 32 | #define MCS5080_TOUCHKEY_STATUS_PRESS 3 |
| 33 | #define MCS5080_TOUCHKEY_FW 0x01 |
| 34 | #define MCS5080_TOUCHKEY_BASE_VAL 0x1 |
| 35 | |
| 36 | enum mcs_touchkey_type { |
| 37 | MCS5000_TOUCHKEY, |
| 38 | MCS5080_TOUCHKEY, |
| 39 | }; |
| 40 | |
| 41 | struct mcs_touchkey_chip { |
| 42 | unsigned int status_reg; |
| 43 | unsigned int pressbit; |
| 44 | unsigned int press_invert; |
| 45 | unsigned int baseval; |
| 46 | }; |
| 47 | |
| 48 | struct mcs_touchkey_data { |
Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 49 | void (*poweron)(bool); |
| 50 | |
Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 51 | struct i2c_client *client; |
| 52 | struct input_dev *input_dev; |
| 53 | struct mcs_touchkey_chip chip; |
| 54 | unsigned int key_code; |
| 55 | unsigned int key_val; |
| 56 | unsigned short keycodes[]; |
| 57 | }; |
| 58 | |
| 59 | static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) |
| 60 | { |
| 61 | struct mcs_touchkey_data *data = dev_id; |
| 62 | struct mcs_touchkey_chip *chip = &data->chip; |
| 63 | struct i2c_client *client = data->client; |
| 64 | struct input_dev *input = data->input_dev; |
| 65 | unsigned int key_val; |
| 66 | unsigned int pressed; |
| 67 | int val; |
| 68 | |
| 69 | val = i2c_smbus_read_byte_data(client, chip->status_reg); |
| 70 | if (val < 0) { |
| 71 | dev_err(&client->dev, "i2c read error [%d]\n", val); |
| 72 | goto out; |
| 73 | } |
| 74 | |
| 75 | pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; |
| 76 | if (chip->press_invert) |
| 77 | pressed ^= chip->press_invert; |
| 78 | |
| 79 | /* key_val is 0 when released, so we should use key_val of press. */ |
| 80 | if (pressed) { |
| 81 | key_val = val & (0xff >> (8 - chip->pressbit)); |
| 82 | if (!key_val) |
| 83 | goto out; |
| 84 | key_val -= chip->baseval; |
| 85 | data->key_code = data->keycodes[key_val]; |
| 86 | data->key_val = key_val; |
| 87 | } |
| 88 | |
| 89 | input_event(input, EV_MSC, MSC_SCAN, data->key_val); |
| 90 | input_report_key(input, data->key_code, pressed); |
| 91 | input_sync(input); |
| 92 | |
| 93 | dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, |
| 94 | pressed ? "pressed" : "released"); |
| 95 | |
| 96 | out: |
| 97 | return IRQ_HANDLED; |
| 98 | } |
| 99 | |
| 100 | static int __devinit mcs_touchkey_probe(struct i2c_client *client, |
| 101 | const struct i2c_device_id *id) |
| 102 | { |
| 103 | const struct mcs_platform_data *pdata; |
| 104 | struct mcs_touchkey_data *data; |
| 105 | struct input_dev *input_dev; |
| 106 | unsigned int fw_reg; |
| 107 | int fw_ver; |
| 108 | int error; |
| 109 | int i; |
| 110 | |
| 111 | pdata = client->dev.platform_data; |
| 112 | if (!pdata) { |
| 113 | dev_err(&client->dev, "no platform data defined\n"); |
| 114 | return -EINVAL; |
| 115 | } |
| 116 | |
| 117 | data = kzalloc(sizeof(struct mcs_touchkey_data) + |
| 118 | sizeof(data->keycodes[0]) * (pdata->key_maxval + 1), |
| 119 | GFP_KERNEL); |
| 120 | input_dev = input_allocate_device(); |
| 121 | if (!data || !input_dev) { |
| 122 | dev_err(&client->dev, "Failed to allocate memory\n"); |
| 123 | error = -ENOMEM; |
| 124 | goto err_free_mem; |
| 125 | } |
| 126 | |
| 127 | data->client = client; |
| 128 | data->input_dev = input_dev; |
| 129 | |
| 130 | if (id->driver_data == MCS5000_TOUCHKEY) { |
| 131 | data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; |
| 132 | data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; |
| 133 | data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; |
| 134 | fw_reg = MCS5000_TOUCHKEY_FW; |
| 135 | } else { |
| 136 | data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; |
| 137 | data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; |
| 138 | data->chip.press_invert = 1; |
| 139 | data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; |
| 140 | fw_reg = MCS5080_TOUCHKEY_FW; |
| 141 | } |
| 142 | |
| 143 | fw_ver = i2c_smbus_read_byte_data(client, fw_reg); |
| 144 | if (fw_ver < 0) { |
| 145 | error = fw_ver; |
| 146 | dev_err(&client->dev, "i2c read error[%d]\n", error); |
| 147 | goto err_free_mem; |
| 148 | } |
| 149 | dev_info(&client->dev, "Firmware version: %d\n", fw_ver); |
| 150 | |
| 151 | input_dev->name = "MELPAS MCS Touchkey"; |
| 152 | input_dev->id.bustype = BUS_I2C; |
| 153 | input_dev->dev.parent = &client->dev; |
| 154 | input_dev->evbit[0] = BIT_MASK(EV_KEY); |
| 155 | if (!pdata->no_autorepeat) |
| 156 | input_dev->evbit[0] |= BIT_MASK(EV_REP); |
| 157 | input_dev->keycode = data->keycodes; |
| 158 | input_dev->keycodesize = sizeof(data->keycodes[0]); |
| 159 | input_dev->keycodemax = pdata->key_maxval + 1; |
| 160 | |
| 161 | for (i = 0; i < pdata->keymap_size; i++) { |
| 162 | unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); |
| 163 | unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); |
| 164 | |
| 165 | data->keycodes[val] = code; |
| 166 | __set_bit(code, input_dev->keybit); |
| 167 | } |
| 168 | |
| 169 | input_set_capability(input_dev, EV_MSC, MSC_SCAN); |
| 170 | input_set_drvdata(input_dev, data); |
| 171 | |
| 172 | if (pdata->cfg_pin) |
| 173 | pdata->cfg_pin(); |
| 174 | |
Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 175 | if (pdata->poweron) { |
| 176 | data->poweron = pdata->poweron; |
| 177 | data->poweron(true); |
| 178 | } |
| 179 | |
Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 180 | error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt, |
| 181 | IRQF_TRIGGER_FALLING, client->dev.driver->name, data); |
| 182 | if (error) { |
| 183 | dev_err(&client->dev, "Failed to register interrupt\n"); |
| 184 | goto err_free_mem; |
| 185 | } |
| 186 | |
| 187 | error = input_register_device(input_dev); |
| 188 | if (error) |
| 189 | goto err_free_irq; |
| 190 | |
| 191 | i2c_set_clientdata(client, data); |
| 192 | return 0; |
| 193 | |
| 194 | err_free_irq: |
| 195 | free_irq(client->irq, data); |
| 196 | err_free_mem: |
| 197 | input_free_device(input_dev); |
| 198 | kfree(data); |
| 199 | return error; |
| 200 | } |
| 201 | |
| 202 | static int __devexit mcs_touchkey_remove(struct i2c_client *client) |
| 203 | { |
| 204 | struct mcs_touchkey_data *data = i2c_get_clientdata(client); |
| 205 | |
| 206 | free_irq(client->irq, data); |
Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 207 | if (data->poweron) |
| 208 | data->poweron(false); |
Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 209 | input_unregister_device(data->input_dev); |
| 210 | kfree(data); |
| 211 | |
| 212 | return 0; |
| 213 | } |
| 214 | |
HeungJun Kim | 5f62615 | 2011-02-23 21:42:49 -0800 | [diff] [blame] | 215 | static void mcs_touchkey_shutdown(struct i2c_client *client) |
| 216 | { |
| 217 | struct mcs_touchkey_data *data = i2c_get_clientdata(client); |
| 218 | |
| 219 | if (data->poweron) |
| 220 | data->poweron(false); |
| 221 | } |
| 222 | |
Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 223 | #ifdef CONFIG_PM_SLEEP |
| 224 | static int mcs_touchkey_suspend(struct device *dev) |
| 225 | { |
| 226 | struct mcs_touchkey_data *data = dev_get_drvdata(dev); |
| 227 | struct i2c_client *client = data->client; |
| 228 | |
| 229 | /* Disable the work */ |
| 230 | disable_irq(client->irq); |
| 231 | |
| 232 | /* Finally turn off the power */ |
| 233 | if (data->poweron) |
| 234 | data->poweron(false); |
| 235 | |
| 236 | return 0; |
| 237 | } |
| 238 | |
| 239 | static int mcs_touchkey_resume(struct device *dev) |
| 240 | { |
| 241 | struct mcs_touchkey_data *data = dev_get_drvdata(dev); |
| 242 | struct i2c_client *client = data->client; |
| 243 | |
| 244 | /* Enable the device first */ |
| 245 | if (data->poweron) |
| 246 | data->poweron(true); |
| 247 | |
| 248 | /* Enable irq again */ |
| 249 | enable_irq(client->irq); |
| 250 | |
| 251 | return 0; |
| 252 | } |
| 253 | #endif |
| 254 | |
| 255 | static SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, |
| 256 | mcs_touchkey_suspend, mcs_touchkey_resume); |
| 257 | |
Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 258 | static const struct i2c_device_id mcs_touchkey_id[] = { |
| 259 | { "mcs5000_touchkey", MCS5000_TOUCHKEY }, |
| 260 | { "mcs5080_touchkey", MCS5080_TOUCHKEY }, |
| 261 | { } |
| 262 | }; |
| 263 | MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); |
| 264 | |
| 265 | static struct i2c_driver mcs_touchkey_driver = { |
| 266 | .driver = { |
| 267 | .name = "mcs_touchkey", |
| 268 | .owner = THIS_MODULE, |
Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 269 | .pm = &mcs_touchkey_pm_ops, |
Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 270 | }, |
| 271 | .probe = mcs_touchkey_probe, |
| 272 | .remove = __devexit_p(mcs_touchkey_remove), |
HeungJun Kim | 5f62615 | 2011-02-23 21:42:49 -0800 | [diff] [blame] | 273 | .shutdown = mcs_touchkey_shutdown, |
Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 274 | .id_table = mcs_touchkey_id, |
| 275 | }; |
| 276 | |
| 277 | static int __init mcs_touchkey_init(void) |
| 278 | { |
| 279 | return i2c_add_driver(&mcs_touchkey_driver); |
| 280 | } |
| 281 | |
| 282 | static void __exit mcs_touchkey_exit(void) |
| 283 | { |
| 284 | i2c_del_driver(&mcs_touchkey_driver); |
| 285 | } |
| 286 | |
| 287 | module_init(mcs_touchkey_init); |
| 288 | module_exit(mcs_touchkey_exit); |
| 289 | |
| 290 | /* Module information */ |
| 291 | MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); |
| 292 | MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); |
| 293 | MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); |
| 294 | MODULE_LICENSE("GPL"); |