blob: f0f3358d1b1bd6d7bee05a2fb20df42e31d050fc [file] [log] [blame]
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -03001/*
2 V4L2 sub-device support header.
3
4 Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
5
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
10
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
15
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#ifndef _V4L2_SUBDEV_H
22#define _V4L2_SUBDEV_H
23
Laurent Pinchart333c8b92010-03-15 20:26:04 -030024#include <linux/v4l2-subdev.h>
Laurent Pinchart61f5db52009-12-09 08:40:08 -030025#include <media/media-entity.h>
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -030026#include <media/v4l2-common.h>
Laurent Pinchart2096a5d2009-12-09 08:38:49 -030027#include <media/v4l2-dev.h>
Stanimir Varbanov7cd5a162010-05-21 06:04:24 -030028#include <media/v4l2-fh.h>
Guennadi Liakhovetski9a742512009-12-11 11:41:28 -030029#include <media/v4l2-mediabus.h>
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -030030
Andy Walls1d986ad2009-09-27 17:50:04 -030031/* generic v4l2_device notify callback notification values */
32#define V4L2_SUBDEV_IR_RX_NOTIFY _IOW('v', 0, u32)
33#define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ 0x00000001
34#define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED 0x00000002
35#define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN 0x00000004
36#define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN 0x00000008
37
38#define V4L2_SUBDEV_IR_TX_NOTIFY _IOW('v', 1, u32)
39#define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ 0x00000001
40
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -030041struct v4l2_device;
Hans Verkuil09965172010-08-01 14:32:42 -030042struct v4l2_ctrl_handler;
Sakari Ailus02adb1c2010-03-03 12:49:38 -030043struct v4l2_event_subscription;
44struct v4l2_fh;
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -030045struct v4l2_subdev;
Laurent Pinchartf0beea82010-08-01 19:05:09 -030046struct v4l2_subdev_fh;
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -030047struct tuner_setup;
48
Hans Verkuil78a3b4d2009-04-01 03:41:09 -030049/* decode_vbi_line */
50struct v4l2_decode_vbi_line {
51 u32 is_second_field; /* Set to 0 for the first (odd) field,
52 set to 1 for the second (even) field. */
53 u8 *p; /* Pointer to the sliced VBI data from the decoder.
54 On exit points to the start of the payload. */
55 u32 line; /* Line number of the sliced VBI data (1-23) */
56 u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */
57};
58
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -030059/* Sub-devices are devices that are connected somehow to the main bridge
60 device. These devices are usually audio/video muxers/encoders/decoders or
61 sensors and webcam controllers.
62
63 Usually these devices are controlled through an i2c bus, but other busses
64 may also be used.
65
66 The v4l2_subdev struct provides a way of accessing these devices in a
67 generic manner. Most operations that these sub-devices support fall in
68 a few categories: core ops, audio ops, video ops and tuner ops.
69
70 More categories can be added if needed, although this should remain a
71 limited set (no more than approx. 8 categories).
72
73 Each category has its own set of ops that subdev drivers can implement.
74
75 A subdev driver can leave the pointer to the category ops NULL if
76 it does not implement them (e.g. an audio subdev will generally not
77 implement the video category ops). The exception is the core category:
78 this must always be present.
79
80 These ops are all used internally so it is no problem to change, remove
81 or add ops or move ops from one to another category. Currently these
82 ops are based on the original ioctls, but since ops are not limited to
83 one argument there is room for improvement here once all i2c subdev
84 drivers are converted to use these ops.
85 */
86
87/* Core ops: it is highly recommended to implement at least these ops:
88
89 g_chip_ident
90 log_status
91 g_register
92 s_register
93
94 This provides basic debugging support.
95
96 The ioctl ops is meant for generic ioctl-like commands. Depending on
97 the use-case it might be better to use subdev-specific ops (currently
98 not yet implemented) since ops provide proper type-checking.
99 */
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300100
Andy Walls66752f82010-07-18 18:51:10 -0300101/* Subdevice external IO pin configuration */
102#define V4L2_SUBDEV_IO_PIN_DISABLE (1 << 0) /* ENABLE assumed */
103#define V4L2_SUBDEV_IO_PIN_OUTPUT (1 << 1)
104#define V4L2_SUBDEV_IO_PIN_INPUT (1 << 2)
105#define V4L2_SUBDEV_IO_PIN_SET_VALUE (1 << 3) /* Set output value */
106#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW (1 << 4) /* ACTIVE HIGH assumed */
107
108struct v4l2_subdev_io_pin_config {
109 u32 flags; /* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */
110 u8 pin; /* Chip external IO pin to configure */
111 u8 function; /* Internal signal pad/function to route to IO pin */
112 u8 value; /* Initial value for pin - e.g. GPIO output value */
113 u8 strength; /* Pin drive strength */
114};
115
Hans Verkuil3c7c9372011-01-08 07:08:02 -0300116/*
Andy Walls66752f82010-07-18 18:51:10 -0300117 s_io_pin_config: configure one or more chip I/O pins for chips that
118 multiplex different internal signal pads out to IO pins. This function
119 takes a pointer to an array of 'n' pin configuration entries, one for
120 each pin being configured. This function could be called at times
121 other than just subdevice initialization.
122
Hans Verkuilf0222c72009-06-09 17:12:33 -0300123 init: initialize the sensor registors to some sort of reasonable default
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300124 values. Do not use for new drivers and should be removed in existing
125 drivers.
126
Hans Verkuilcc26b072009-03-29 19:20:26 -0300127 load_fw: load firmware.
128
129 reset: generic reset command. The argument selects which subsystems to
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300130 reset. Passing 0 will always reset the whole chip. Do not use for new
131 drivers without discussing this first on the linux-media mailinglist.
132 There should be no reason normally to reset a device.
133
134 s_gpio: set GPIO pins. Very simple right now, might need to be extended with
135 a direction argument if needed.
Laurent Pinchart622b8282009-10-05 10:48:17 -0300136
137 s_power: puts subdevice in power saving mode (on == 0) or normal operation
138 mode (on == 1).
Andy Walls260e6892010-07-18 20:54:52 -0300139
140 interrupt_service_routine: Called by the bridge chip's interrupt service
141 handler, when an interrupt status has be raised due to this subdev,
142 so that this subdev can handle the details. It may schedule work to be
143 performed later. It must not sleep. *Called from an IRQ context*.
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300144 */
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300145struct v4l2_subdev_core_ops {
Hans Verkuilaecde8b2008-12-30 07:14:19 -0300146 int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300147 int (*log_status)(struct v4l2_subdev *sd);
Andy Walls66752f82010-07-18 18:51:10 -0300148 int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n,
149 struct v4l2_subdev_io_pin_config *pincfg);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300150 int (*init)(struct v4l2_subdev *sd, u32 val);
Hans Verkuilcc26b072009-03-29 19:20:26 -0300151 int (*load_fw)(struct v4l2_subdev *sd);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300152 int (*reset)(struct v4l2_subdev *sd, u32 val);
153 int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
154 int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
155 int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
156 int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
Hans Verkuil952617f2009-01-12 18:17:14 -0300157 int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
158 int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
159 int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300160 int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
Guennadi Liakhovetski1a99b972011-09-09 13:10:02 -0300161 int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
Hans Verkuilf41737e2009-04-01 03:52:39 -0300162 int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
Hans Verkuil069b7472008-12-30 07:04:34 -0300163 long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300164#ifdef CONFIG_VIDEO_ADV_DEBUG
Hans Verkuilaecde8b2008-12-30 07:14:19 -0300165 int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
166 int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300167#endif
Laurent Pinchart622b8282009-10-05 10:48:17 -0300168 int (*s_power)(struct v4l2_subdev *sd, int on);
Andy Walls260e6892010-07-18 20:54:52 -0300169 int (*interrupt_service_routine)(struct v4l2_subdev *sd,
170 u32 status, bool *handled);
Sakari Ailus02adb1c2010-03-03 12:49:38 -0300171 int (*subscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh,
172 struct v4l2_event_subscription *sub);
173 int (*unsubscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh,
174 struct v4l2_event_subscription *sub);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300175};
176
Hans Verkuile206fc52011-06-13 09:34:56 -0300177/* s_radio: v4l device was opened in radio mode.
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300178
Hans Verkuil338e9e12011-06-13 09:35:56 -0300179 g_frequency: freq->type must be filled in. Normally done by video_ioctl2
180 or the bridge driver.
181
182 g_tuner:
183 s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the
184 bridge driver.
185
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300186 s_type_addr: sets tuner type and its I2C addr.
187
188 s_config: sets tda9887 specific stuff, like port1, port2 and qss
189 */
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300190struct v4l2_subdev_tuner_ops {
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300191 int (*s_radio)(struct v4l2_subdev *sd);
192 int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
193 int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
194 int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
195 int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
Eduardo Valentind6bacea2009-08-08 08:34:18 -0300196 int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
197 int (*s_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300198 int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
199 int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
200};
201
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300202/* s_clock_freq: set the frequency (in Hz) of the audio clock output.
203 Used to slave an audio processor to the video decoder, ensuring that
204 audio and video remain synchronized. Usual values for the frequency
205 are 48000, 44100 or 32000 Hz. If the frequency is not supported, then
206 -EINVAL is returned.
207
208 s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard
209 way to select I2S clock used by driving digital audio streams at some
210 board designs. Usual values for the frequency are 1024000 and 2048000.
211 If the frequency is not supported, then -EINVAL is returned.
212
Hans Verkuil5325b422009-04-02 11:26:22 -0300213 s_routing: used to define the input and/or output pins of an audio chip,
214 and any additional configuration data.
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300215 Never attempt to use user-level input IDs (e.g. Composite, S-Video,
216 Tuner) at this level. An i2c device shouldn't know about whether an
217 input pin is connected to a Composite connector, become on another
218 board or platform it might be connected to something else entirely.
219 The calling driver is responsible for mapping a user-level input to
220 the right pins on the i2c device.
221 */
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300222struct v4l2_subdev_audio_ops {
223 int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
224 int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
Hans Verkuil5325b422009-04-02 11:26:22 -0300225 int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
Andy Walls3ccc6462009-12-24 13:06:08 -0300226 int (*s_stream)(struct v4l2_subdev *sd, int enable);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300227};
228
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300229/*
Hans Verkuilcc26b072009-03-29 19:20:26 -0300230 s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300231 video input devices.
232
Tomasz Stanislawski5930ab22011-06-29 07:16:15 -0300233 g_std_output: get current standard for video OUTPUT devices. This is ignored
234 by video input devices.
235
Tomasz Stanislawski839cf812011-03-02 13:16:37 -0300236 g_tvnorms_output: get v4l2_std_id with all standards supported by video
237 OUTPUT device. This is ignored by video input devices.
238
Guennadi Liakhovetski9a742512009-12-11 11:41:28 -0300239 s_crystal_freq: sets the frequency of the crystal used to generate the
Hans Verkuil3ff4ad82009-04-01 03:15:52 -0300240 clocks in Hz. An extra flags field allows device specific configuration
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300241 regarding clock frequency dividers, etc. If not used, then set flags
242 to 0. If the frequency is not supported, then -EINVAL is returned.
243
Hans Verkuilcc26b072009-03-29 19:20:26 -0300244 g_input_status: get input status. Same as the status field in the v4l2_input
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300245 struct.
246
Hans Verkuilcc26b072009-03-29 19:20:26 -0300247 s_routing: see s_routing in audio_ops, except this version is for video
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300248 devices.
Muralidharan Karicherib6456c02009-11-19 12:00:31 -0300249
250 s_dv_preset: set dv (Digital Video) preset in the sub device. Similar to
251 s_std()
252
Tomasz Stanislawski8b32dd02011-06-29 07:01:28 -0300253 g_dv_preset: get current dv (Digital Video) preset in the sub device.
254
Muralidharan Karicherib6456c02009-11-19 12:00:31 -0300255 query_dv_preset: query dv preset in the sub device. This is similar to
256 querystd()
257
258 s_dv_timings(): Set custom dv timings in the sub device. This is used
259 when sub device is capable of setting detailed timing information
260 in the hardware to generate/detect the video signal.
261
262 g_dv_timings(): Get custom dv timings in the sub device.
263
Guennadi Liakhovetski9a742512009-12-11 11:41:28 -0300264 enum_mbus_fmt: enumerate pixel formats, provided by a video data source
265
266 g_mbus_fmt: get the current pixel format, provided by a video data source
267
268 try_mbus_fmt: try to set a pixel format on a video data source
269
270 s_mbus_fmt: set a pixel format on a video data source
Guennadi Liakhovetski91c79532011-07-01 14:31:17 -0300271
272 g_mbus_config: get supported mediabus configurations
273
274 s_mbus_config: set a certain mediabus configuration. This operation is added
275 for compatibility with soc-camera drivers and should not be used by new
276 software.
Hans Verkuil78a3b4d2009-04-01 03:41:09 -0300277 */
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300278struct v4l2_subdev_video_ops {
Hans Verkuil5325b422009-04-02 11:26:22 -0300279 int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
Hans Verkuil3ff4ad82009-04-01 03:15:52 -0300280 int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300281 int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
Tomasz Stanislawski5930ab22011-06-29 07:16:15 -0300282 int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
Hans Verkuil1b6f1d92009-02-13 07:48:21 -0300283 int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
Tomasz Stanislawski839cf812011-03-02 13:16:37 -0300284 int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
Hans Verkuil1b6f1d92009-02-13 07:48:21 -0300285 int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300286 int (*s_stream)(struct v4l2_subdev *sd, int enable);
Guennadi Liakhovetskib7f2cef2009-06-24 10:31:25 -0300287 int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
288 int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
289 int (*s_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
Hans Verkuil2da94792009-02-06 18:59:35 -0300290 int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
291 int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
Laurent Pinchart35c30172010-05-05 11:38:35 -0300292 int (*g_frame_interval)(struct v4l2_subdev *sd,
293 struct v4l2_subdev_frame_interval *interval);
294 int (*s_frame_interval)(struct v4l2_subdev *sd,
295 struct v4l2_subdev_frame_interval *interval);
Hans Verkuil4b2ce112009-03-29 19:23:16 -0300296 int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize);
297 int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival);
Mats Randgaard6003b5c2010-05-05 05:08:22 -0300298 int (*enum_dv_presets) (struct v4l2_subdev *sd,
299 struct v4l2_dv_enum_preset *preset);
Muralidharan Karicherib6456c02009-11-19 12:00:31 -0300300 int (*s_dv_preset)(struct v4l2_subdev *sd,
301 struct v4l2_dv_preset *preset);
Tomasz Stanislawski8b32dd02011-06-29 07:01:28 -0300302 int (*g_dv_preset)(struct v4l2_subdev *sd,
303 struct v4l2_dv_preset *preset);
Muralidharan Karicherib6456c02009-11-19 12:00:31 -0300304 int (*query_dv_preset)(struct v4l2_subdev *sd,
305 struct v4l2_dv_preset *preset);
306 int (*s_dv_timings)(struct v4l2_subdev *sd,
307 struct v4l2_dv_timings *timings);
308 int (*g_dv_timings)(struct v4l2_subdev *sd,
309 struct v4l2_dv_timings *timings);
Hans Verkuil3805f202010-05-08 17:55:00 -0300310 int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index,
Guennadi Liakhovetski9a742512009-12-11 11:41:28 -0300311 enum v4l2_mbus_pixelcode *code);
Qing Xu03519b72011-01-20 05:19:40 -0300312 int (*enum_mbus_fsizes)(struct v4l2_subdev *sd,
313 struct v4l2_frmsizeenum *fsize);
Guennadi Liakhovetski9a742512009-12-11 11:41:28 -0300314 int (*g_mbus_fmt)(struct v4l2_subdev *sd,
315 struct v4l2_mbus_framefmt *fmt);
316 int (*try_mbus_fmt)(struct v4l2_subdev *sd,
317 struct v4l2_mbus_framefmt *fmt);
318 int (*s_mbus_fmt)(struct v4l2_subdev *sd,
319 struct v4l2_mbus_framefmt *fmt);
Guennadi Liakhovetski91c79532011-07-01 14:31:17 -0300320 int (*g_mbus_config)(struct v4l2_subdev *sd,
321 struct v4l2_mbus_config *cfg);
322 int (*s_mbus_config)(struct v4l2_subdev *sd,
323 const struct v4l2_mbus_config *cfg);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300324};
325
Hans Verkuil32cd5272010-03-14 09:57:30 -0300326/*
327 decode_vbi_line: video decoders that support sliced VBI need to implement
328 this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the
329 start of the VBI data that was generated by the decoder. The driver
330 then parses the sliced VBI data and sets the other fields in the
331 struct accordingly. The pointer p is updated to point to the start of
332 the payload which can be copied verbatim into the data field of the
333 v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the
334 type field is set to 0 on return.
335
336 s_vbi_data: used to generate VBI signals on a video signal.
337 v4l2_sliced_vbi_data is filled with the data packets that should be
338 output. Note that if you set the line field to 0, then that VBI signal
339 is disabled. If no valid VBI data was found, then the type field is
340 set to 0 on return.
341
342 g_vbi_data: used to obtain the sliced VBI packet from a readback register.
343 Not all video decoders support this. If no data is available because
344 the readback register contains invalid or erroneous data -EIO is
345 returned. Note that you must fill in the 'id' member and the 'field'
346 member (to determine whether CC data from the first or second field
347 should be obtained).
Hans Verkuil54aefaf2010-03-14 10:02:50 -0300348
349 s_raw_fmt: setup the video encoder/decoder for raw VBI.
350
351 g_sliced_fmt: retrieve the current sliced VBI settings.
352
353 s_sliced_fmt: setup the sliced VBI settings.
Hans Verkuil32cd5272010-03-14 09:57:30 -0300354 */
355struct v4l2_subdev_vbi_ops {
356 int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
357 int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
358 int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
359 int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap);
Hans Verkuil54aefaf2010-03-14 10:02:50 -0300360 int (*s_raw_fmt)(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt);
361 int (*g_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
362 int (*s_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
Hans Verkuil32cd5272010-03-14 09:57:30 -0300363};
364
Guennadi Liakhovetski32536102009-12-11 11:14:46 -0300365/**
366 * struct v4l2_subdev_sensor_ops - v4l2-subdev sensor operations
367 * @g_skip_top_lines: number of lines at the top of the image to be skipped.
368 * This is needed for some sensors, which always corrupt
369 * several top lines of the output image, or which send their
370 * metadata in them.
Laurent Pinchartf80a3ab2010-11-16 01:21:06 -0300371 * @g_skip_frames: number of frames to skip at stream start. This is needed for
372 * buggy sensors that generate faulty frames when they are
373 * turned on.
Guennadi Liakhovetski32536102009-12-11 11:14:46 -0300374 */
375struct v4l2_subdev_sensor_ops {
376 int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines);
Laurent Pinchartf80a3ab2010-11-16 01:21:06 -0300377 int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames);
Guennadi Liakhovetski32536102009-12-11 11:14:46 -0300378};
379
Andy Walls1d986ad2009-09-27 17:50:04 -0300380/*
Andy Walls1d986ad2009-09-27 17:50:04 -0300381 [rt]x_g_parameters: Get the current operating parameters and state of the
382 the IR receiver or transmitter.
383
384 [rt]x_s_parameters: Set the current operating parameters and state of the
385 the IR receiver or transmitter. It is recommended to call
386 [rt]x_g_parameters first to fill out the current state, and only change
387 the fields that need to be changed. Upon return, the actual device
388 operating parameters and state will be returned. Note that hardware
389 limitations may prevent the actual settings from matching the requested
390 settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
391 was requested. An exception is when the shutdown parameter is true.
392 The last used operational parameters will be returned, but the actual
393 state of the hardware be different to minimize power consumption and
394 processing when shutdown is true.
395
396 rx_read: Reads received codes or pulse width data.
397 The semantics are similar to a non-blocking read() call.
398
399 tx_write: Writes codes or pulse width data for transmission.
400 The semantics are similar to a non-blocking write() call.
401 */
402
403enum v4l2_subdev_ir_mode {
Andy Wallsd69e85b2010-08-01 02:36:20 -0300404 V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */
Andy Walls1d986ad2009-09-27 17:50:04 -0300405};
406
Andy Walls1d986ad2009-09-27 17:50:04 -0300407struct v4l2_subdev_ir_parameters {
408 /* Either Rx or Tx */
409 unsigned int bytes_per_data_element; /* of data in read or write call */
410 enum v4l2_subdev_ir_mode mode;
411
412 bool enable;
413 bool interrupt_enable;
414 bool shutdown; /* true: set hardware to low/no power, false: normal */
415
416 bool modulation; /* true: uses carrier, false: baseband */
417 u32 max_pulse_width; /* ns, valid only for baseband signal */
418 unsigned int carrier_freq; /* Hz, valid only for modulated signal*/
419 unsigned int duty_cycle; /* percent, valid only for modulated signal*/
Andy Walls5a28d9a2010-07-18 19:57:25 -0300420 bool invert_level; /* invert signal level */
421
422 /* Tx only */
423 bool invert_carrier_sense; /* Send 0/space as a carrier burst */
Andy Walls1d986ad2009-09-27 17:50:04 -0300424
425 /* Rx only */
426 u32 noise_filter_min_width; /* ns, min time of a valid pulse */
427 unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */
428 unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */
429 u32 resolution; /* ns */
430};
431
432struct v4l2_subdev_ir_ops {
Andy Walls1d986ad2009-09-27 17:50:04 -0300433 /* Receiver */
434 int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
435 ssize_t *num);
436
437 int (*rx_g_parameters)(struct v4l2_subdev *sd,
438 struct v4l2_subdev_ir_parameters *params);
439 int (*rx_s_parameters)(struct v4l2_subdev *sd,
440 struct v4l2_subdev_ir_parameters *params);
441
442 /* Transmitter */
443 int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count,
444 ssize_t *num);
445
446 int (*tx_g_parameters)(struct v4l2_subdev *sd,
447 struct v4l2_subdev_ir_parameters *params);
448 int (*tx_s_parameters)(struct v4l2_subdev *sd,
449 struct v4l2_subdev_ir_parameters *params);
450};
451
Laurent Pincharteb08f352009-12-09 08:39:52 -0300452struct v4l2_subdev_pad_ops {
Laurent Pinchart333c8b92010-03-15 20:26:04 -0300453 int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
454 struct v4l2_subdev_mbus_code_enum *code);
455 int (*enum_frame_size)(struct v4l2_subdev *sd,
456 struct v4l2_subdev_fh *fh,
457 struct v4l2_subdev_frame_size_enum *fse);
Laurent Pinchart35c30172010-05-05 11:38:35 -0300458 int (*enum_frame_interval)(struct v4l2_subdev *sd,
459 struct v4l2_subdev_fh *fh,
460 struct v4l2_subdev_frame_interval_enum *fie);
Laurent Pinchart333c8b92010-03-15 20:26:04 -0300461 int (*get_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
462 struct v4l2_subdev_format *format);
463 int (*set_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
464 struct v4l2_subdev_format *format);
Antti Koskipaaf6a5cb12010-06-23 05:03:42 -0300465 int (*set_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
466 struct v4l2_subdev_crop *crop);
467 int (*get_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
468 struct v4l2_subdev_crop *crop);
Laurent Pincharteb08f352009-12-09 08:39:52 -0300469};
470
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300471struct v4l2_subdev_ops {
Guennadi Liakhovetski32536102009-12-11 11:14:46 -0300472 const struct v4l2_subdev_core_ops *core;
473 const struct v4l2_subdev_tuner_ops *tuner;
474 const struct v4l2_subdev_audio_ops *audio;
475 const struct v4l2_subdev_video_ops *video;
Hans Verkuil32cd5272010-03-14 09:57:30 -0300476 const struct v4l2_subdev_vbi_ops *vbi;
Guennadi Liakhovetski32536102009-12-11 11:14:46 -0300477 const struct v4l2_subdev_ir_ops *ir;
478 const struct v4l2_subdev_sensor_ops *sensor;
Laurent Pincharteb08f352009-12-09 08:39:52 -0300479 const struct v4l2_subdev_pad_ops *pad;
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300480};
481
Hans Verkuil45f6f842011-01-08 07:15:53 -0300482/*
483 * Internal ops. Never call this from drivers, only the v4l2 framework can call
484 * these ops.
485 *
486 * registered: called when this subdev is registered. When called the v4l2_dev
487 * field is set to the correct v4l2_device.
488 *
489 * unregistered: called when this subdev is unregistered. When called the
490 * v4l2_dev field is still set to the correct v4l2_device.
Laurent Pinchartf0beea82010-08-01 19:05:09 -0300491 *
492 * open: called when the subdev device node is opened by an application.
493 *
494 * close: called when the subdev device node is closed.
Hans Verkuil45f6f842011-01-08 07:15:53 -0300495 */
496struct v4l2_subdev_internal_ops {
497 int (*registered)(struct v4l2_subdev *sd);
498 void (*unregistered)(struct v4l2_subdev *sd);
Laurent Pinchartf0beea82010-08-01 19:05:09 -0300499 int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh);
500 int (*close)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh);
Hans Verkuil45f6f842011-01-08 07:15:53 -0300501};
502
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300503#define V4L2_SUBDEV_NAME_SIZE 32
504
Hans Verkuilb5b2b7e2009-05-02 10:58:51 -0300505/* Set this flag if this subdev is a i2c device. */
Laurent Pinchart2096a5d2009-12-09 08:38:49 -0300506#define V4L2_SUBDEV_FL_IS_I2C (1U << 0)
Dmitri Belimov85e09212010-03-23 11:23:29 -0300507/* Set this flag if this subdev is a spi device. */
Laurent Pinchart2096a5d2009-12-09 08:38:49 -0300508#define V4L2_SUBDEV_FL_IS_SPI (1U << 1)
509/* Set this flag if this subdev needs a device node. */
510#define V4L2_SUBDEV_FL_HAS_DEVNODE (1U << 2)
Sakari Ailus02adb1c2010-03-03 12:49:38 -0300511/* Set this flag if this subdev generates events. */
512#define V4L2_SUBDEV_FL_HAS_EVENTS (1U << 3)
Hans Verkuilb5b2b7e2009-05-02 10:58:51 -0300513
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300514/* Each instance of a subdev driver should create this struct, either
515 stand-alone or embedded in a larger struct.
516 */
517struct v4l2_subdev {
Laurent Pinchart61f5db52009-12-09 08:40:08 -0300518#if defined(CONFIG_MEDIA_CONTROLLER)
519 struct media_entity entity;
520#endif
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300521 struct list_head list;
522 struct module *owner;
Hans Verkuilb5b2b7e2009-05-02 10:58:51 -0300523 u32 flags;
Hans Verkuilb0167602009-02-14 12:00:53 -0300524 struct v4l2_device *v4l2_dev;
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300525 const struct v4l2_subdev_ops *ops;
Hans Verkuil45f6f842011-01-08 07:15:53 -0300526 /* Never call these internal ops from within a driver! */
527 const struct v4l2_subdev_internal_ops *internal_ops;
Hans Verkuil09965172010-08-01 14:32:42 -0300528 /* The control handler of this subdev. May be NULL. */
529 struct v4l2_ctrl_handler *ctrl_handler;
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300530 /* name must be unique */
531 char name[V4L2_SUBDEV_NAME_SIZE];
532 /* can be used to group similar subdevs, value is driver-specific */
533 u32 grp_id;
534 /* pointer to private data */
Laurent Pinchart692d5522010-07-30 17:24:55 -0300535 void *dev_priv;
536 void *host_priv;
Laurent Pinchart2096a5d2009-12-09 08:38:49 -0300537 /* subdev device node */
Guennadi Liakhovetski3e0ec412011-09-13 08:07:55 -0300538 struct video_device *devnode;
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300539};
540
Laurent Pinchart61f5db52009-12-09 08:40:08 -0300541#define media_entity_to_v4l2_subdev(ent) \
542 container_of(ent, struct v4l2_subdev, entity)
Laurent Pinchart2096a5d2009-12-09 08:38:49 -0300543#define vdev_to_v4l2_subdev(vdev) \
Guennadi Liakhovetski3e0ec412011-09-13 08:07:55 -0300544 video_get_drvdata(vdev)
Laurent Pinchart2096a5d2009-12-09 08:38:49 -0300545
Stanimir Varbanov7cd5a162010-05-21 06:04:24 -0300546/*
547 * Used for storing subdev information per file handle
548 */
549struct v4l2_subdev_fh {
550 struct v4l2_fh vfh;
551#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
552 struct v4l2_mbus_framefmt *try_fmt;
553 struct v4l2_rect *try_crop;
554#endif
555};
556
557#define to_v4l2_subdev_fh(fh) \
558 container_of(fh, struct v4l2_subdev_fh, vfh)
559
560#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
561static inline struct v4l2_mbus_framefmt *
562v4l2_subdev_get_try_format(struct v4l2_subdev_fh *fh, unsigned int pad)
563{
564 return &fh->try_fmt[pad];
565}
566
567static inline struct v4l2_rect *
568v4l2_subdev_get_try_crop(struct v4l2_subdev_fh *fh, unsigned int pad)
569{
570 return &fh->try_crop[pad];
571}
572#endif
573
Laurent Pinchart2096a5d2009-12-09 08:38:49 -0300574extern const struct v4l2_file_operations v4l2_subdev_fops;
575
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300576static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
577{
Laurent Pinchart692d5522010-07-30 17:24:55 -0300578 sd->dev_priv = p;
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300579}
580
581static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
582{
Laurent Pinchart692d5522010-07-30 17:24:55 -0300583 return sd->dev_priv;
584}
585
586static inline void v4l2_set_subdev_hostdata(struct v4l2_subdev *sd, void *p)
587{
588 sd->host_priv = p;
589}
590
591static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd)
592{
593 return sd->host_priv;
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300594}
595
Laurent Pinchart3dd5ee02009-12-09 08:38:52 -0300596void v4l2_subdev_init(struct v4l2_subdev *sd,
597 const struct v4l2_subdev_ops *ops);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300598
599/* Call an ops of a v4l2_subdev, doing the right checks against
600 NULL pointers.
601
602 Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
603 */
604#define v4l2_subdev_call(sd, o, f, args...) \
Hans Verkuildbc8e342009-06-09 17:34:01 -0300605 (!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300606 (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
607
Hans Verkuil98ec6332009-03-08 17:02:10 -0300608/* Send a notification to v4l2_device. */
609#define v4l2_subdev_notify(sd, notification, arg) \
610 ((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \
611 (sd)->v4l2_dev->notify((sd), (notification), (arg)))
612
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300613#endif