Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 1 | /* |
| 2 | * PNX833x Hardware Watchdog Driver |
| 3 | * Copyright 2008 NXP Semiconductors |
| 4 | * Daniel Laird <daniel.j.laird@nxp.com> |
| 5 | * Andre McCurdy <andre.mccurdy@nxp.com> |
| 6 | * |
| 7 | * Heavily based upon - IndyDog 0.3 |
| 8 | * A Hardware Watchdog Device for SGI IP22 |
| 9 | * |
| 10 | * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved. |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or |
| 13 | * modify it under the terms of the GNU General Public License |
| 14 | * as published by the Free Software Foundation; either version |
| 15 | * 2 of the License, or (at your option) any later version. |
| 16 | * |
| 17 | * based on softdog.c by Alan Cox <alan@redhat.com> |
| 18 | */ |
| 19 | |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/moduleparam.h> |
| 22 | #include <linux/types.h> |
| 23 | #include <linux/kernel.h> |
| 24 | #include <linux/fs.h> |
| 25 | #include <linux/mm.h> |
| 26 | #include <linux/miscdevice.h> |
| 27 | #include <linux/watchdog.h> |
| 28 | #include <linux/notifier.h> |
| 29 | #include <linux/reboot.h> |
| 30 | #include <linux/init.h> |
| 31 | #include <asm/mach-pnx833x/pnx833x.h> |
| 32 | |
| 33 | #define PFX "pnx833x: " |
| 34 | #define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */ |
| 35 | #define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ |
| 36 | |
| 37 | /** CONFIG block */ |
| 38 | #define PNX833X_CONFIG (0x07000U) |
| 39 | #define PNX833X_CONFIG_CPU_WATCHDOG (0x54) |
| 40 | #define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58) |
| 41 | #define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c) |
| 42 | |
| 43 | /** RESET block */ |
| 44 | #define PNX833X_RESET (0x08000U) |
| 45 | #define PNX833X_RESET_CONFIG (0x08) |
| 46 | |
| 47 | static int pnx833x_wdt_alive; |
| 48 | |
| 49 | /* Set default timeout in MHZ.*/ |
| 50 | static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY); |
| 51 | module_param(pnx833x_wdt_timeout, int, 0); |
| 52 | MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" |
| 53 | __MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds)."); |
| 54 | |
| 55 | static int nowayout = WATCHDOG_NOWAYOUT; |
| 56 | module_param(nowayout, int, 0); |
| 57 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| 58 | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| 59 | |
| 60 | static int start_enabled = 1; |
| 61 | module_param(start_enabled, int, 0); |
| 62 | MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion " |
| 63 | "(default=" __MODULE_STRING(start_enabled) ")"); |
| 64 | |
| 65 | static void pnx833x_wdt_start(void) |
| 66 | { |
| 67 | /* Enable watchdog causing reset. */ |
| 68 | PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1; |
| 69 | /* Set timeout.*/ |
| 70 | PNX833X_REG(PNX833X_CONFIG + |
| 71 | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; |
| 72 | /* Enable watchdog. */ |
| 73 | PNX833X_REG(PNX833X_CONFIG + |
| 74 | PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1; |
| 75 | |
| 76 | printk(KERN_INFO PFX "Started watchdog timer.\n"); |
| 77 | } |
| 78 | |
| 79 | static void pnx833x_wdt_stop(void) |
| 80 | { |
| 81 | /* Disable watchdog causing reset. */ |
| 82 | PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE; |
| 83 | /* Disable watchdog.*/ |
| 84 | PNX833X_REG(PNX833X_CONFIG + |
| 85 | PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE; |
| 86 | |
| 87 | printk(KERN_INFO PFX "Stopped watchdog timer.\n"); |
| 88 | } |
| 89 | |
| 90 | static void pnx833x_wdt_ping(void) |
| 91 | { |
| 92 | PNX833X_REG(PNX833X_CONFIG + |
| 93 | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; |
| 94 | } |
| 95 | |
| 96 | /* |
| 97 | * Allow only one person to hold it open |
| 98 | */ |
| 99 | static int pnx833x_wdt_open(struct inode *inode, struct file *file) |
| 100 | { |
| 101 | if (test_and_set_bit(0, &pnx833x_wdt_alive)) |
| 102 | return -EBUSY; |
| 103 | |
| 104 | if (nowayout) |
| 105 | __module_get(THIS_MODULE); |
| 106 | |
| 107 | /* Activate timer */ |
| 108 | if (!start_enabled) |
| 109 | pnx833x_wdt_start(); |
| 110 | |
| 111 | pnx833x_wdt_ping(); |
| 112 | |
| 113 | printk(KERN_INFO "Started watchdog timer.\n"); |
| 114 | |
| 115 | return nonseekable_open(inode, file); |
| 116 | } |
| 117 | |
| 118 | static int pnx833x_wdt_release(struct inode *inode, struct file *file) |
| 119 | { |
| 120 | /* Shut off the timer. |
| 121 | * Lock it in if it's a module and we defined ...NOWAYOUT */ |
| 122 | if (!nowayout) |
| 123 | pnx833x_wdt_stop(); /* Turn the WDT off */ |
| 124 | |
| 125 | clear_bit(0, &pnx833x_wdt_alive); |
| 126 | return 0; |
| 127 | } |
| 128 | |
| 129 | static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) |
| 130 | { |
| 131 | /* Refresh the timer. */ |
| 132 | if (len) |
| 133 | pnx833x_wdt_ping(); |
| 134 | |
| 135 | return len; |
| 136 | } |
| 137 | |
| 138 | static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd, |
| 139 | unsigned long arg) |
| 140 | { |
| 141 | int options, new_timeout = 0; |
| 142 | uint32_t timeout, timeout_left = 0; |
| 143 | |
| 144 | static struct watchdog_info ident = { |
| 145 | .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, |
| 146 | .firmware_version = 0, |
| 147 | .identity = "Hardware Watchdog for PNX833x", |
| 148 | }; |
| 149 | |
| 150 | switch (cmd) { |
| 151 | default: |
| 152 | return -ENOTTY; |
| 153 | |
| 154 | case WDIOC_GETSUPPORT: |
| 155 | if (copy_to_user((struct watchdog_info *)arg, |
| 156 | &ident, sizeof(ident))) |
| 157 | return -EFAULT; |
| 158 | return 0; |
| 159 | |
| 160 | case WDIOC_GETSTATUS: |
| 161 | case WDIOC_GETBOOTSTATUS: |
| 162 | return put_user(0, (int *)arg); |
| 163 | |
| 164 | case WDIOC_SETOPTIONS: |
| 165 | if (get_user(options, (int *)arg)) |
| 166 | return -EFAULT; |
| 167 | |
| 168 | if (options & WDIOS_DISABLECARD) |
| 169 | pnx833x_wdt_stop(); |
| 170 | |
| 171 | if (options & WDIOS_ENABLECARD) |
| 172 | pnx833x_wdt_start(); |
| 173 | |
| 174 | return 0; |
| 175 | |
| 176 | case WDIOC_KEEPALIVE: |
| 177 | pnx833x_wdt_ping(); |
| 178 | return 0; |
| 179 | |
| 180 | case WDIOC_SETTIMEOUT: |
| 181 | { |
| 182 | if (get_user(new_timeout, (int *)arg)) |
| 183 | return -EFAULT; |
| 184 | |
| 185 | pnx833x_wdt_timeout = new_timeout; |
| 186 | PNX833X_REG(PNX833X_CONFIG + |
| 187 | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout; |
| 188 | return put_user(new_timeout, (int *)arg); |
| 189 | } |
| 190 | |
| 191 | case WDIOC_GETTIMEOUT: |
| 192 | timeout = PNX833X_REG(PNX833X_CONFIG + |
| 193 | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE); |
| 194 | return put_user(timeout, (int *)arg); |
| 195 | |
| 196 | case WDIOC_GETTIMELEFT: |
| 197 | timeout_left = PNX833X_REG(PNX833X_CONFIG + |
| 198 | PNX833X_CONFIG_CPU_WATCHDOG); |
| 199 | return put_user(timeout_left, (int *)arg); |
| 200 | |
| 201 | } |
| 202 | } |
| 203 | |
| 204 | static int pnx833x_wdt_notify_sys(struct notifier_block *this, |
| 205 | unsigned long code, void *unused) |
| 206 | { |
| 207 | if (code == SYS_DOWN || code == SYS_HALT) |
| 208 | pnx833x_wdt_stop(); /* Turn the WDT off */ |
| 209 | |
| 210 | return NOTIFY_DONE; |
| 211 | } |
| 212 | |
| 213 | static const struct file_operations pnx833x_wdt_fops = { |
| 214 | .owner = THIS_MODULE, |
| 215 | .llseek = no_llseek, |
| 216 | .write = pnx833x_wdt_write, |
| 217 | .unlocked_ioctl = pnx833x_wdt_ioctl, |
| 218 | .open = pnx833x_wdt_open, |
| 219 | .release = pnx833x_wdt_release, |
| 220 | }; |
| 221 | |
| 222 | static struct miscdevice pnx833x_wdt_miscdev = { |
| 223 | .minor = WATCHDOG_MINOR, |
| 224 | .name = "watchdog", |
| 225 | .fops = &pnx833x_wdt_fops, |
| 226 | }; |
| 227 | |
| 228 | static struct notifier_block pnx833x_wdt_notifier = { |
| 229 | .notifier_call = pnx833x_wdt_notify_sys, |
| 230 | }; |
| 231 | |
| 232 | static char banner[] __initdata = |
| 233 | KERN_INFO PFX "Hardware Watchdog Timer for PNX833x: Version 0.1\n"; |
| 234 | |
| 235 | static int __init watchdog_init(void) |
| 236 | { |
| 237 | int ret, cause; |
| 238 | |
| 239 | /* Lets check the reason for the reset.*/ |
| 240 | cause = PNX833X_REG(PNX833X_RESET); |
| 241 | /*If bit 31 is set then watchdog was cause of reset.*/ |
| 242 | if (cause & 0x80000000) { |
| 243 | printk(KERN_INFO PFX "The system was previously reset due to " |
| 244 | "the watchdog firing - please investigate...\n"); |
| 245 | } |
| 246 | |
| 247 | ret = register_reboot_notifier(&pnx833x_wdt_notifier); |
| 248 | if (ret) { |
| 249 | printk(KERN_ERR PFX |
| 250 | "cannot register reboot notifier (err=%d)\n", ret); |
| 251 | return ret; |
| 252 | } |
| 253 | |
| 254 | ret = misc_register(&pnx833x_wdt_miscdev); |
| 255 | if (ret) { |
| 256 | printk(KERN_ERR PFX |
| 257 | "cannot register miscdev on minor=%d (err=%d)\n", |
| 258 | WATCHDOG_MINOR, ret); |
| 259 | unregister_reboot_notifier(&pnx833x_wdt_notifier); |
| 260 | return ret; |
| 261 | } |
| 262 | |
| 263 | printk(banner); |
| 264 | if (start_enabled) |
| 265 | pnx833x_wdt_start(); |
| 266 | |
| 267 | return 0; |
| 268 | } |
| 269 | |
| 270 | static void __exit watchdog_exit(void) |
| 271 | { |
| 272 | misc_deregister(&pnx833x_wdt_miscdev); |
| 273 | unregister_reboot_notifier(&pnx833x_wdt_notifier); |
| 274 | } |
| 275 | |
| 276 | module_init(watchdog_init); |
| 277 | module_exit(watchdog_exit); |
| 278 | |
| 279 | MODULE_AUTHOR("Daniel Laird/Andre McCurdy"); |
| 280 | MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x"); |
| 281 | MODULE_LICENSE("GPL"); |
| 282 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |