blob: 30ede6e8830fb77b97a51a75d86a24d9422ff007 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/video/cyber2000fb.c
3 *
4 * Copyright (C) 1998-2002 Russell King
5 *
6 * MIPS and 50xx clock support
7 * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
8 *
9 * 32 bit support, text color and panning fixes for modes != 8 bit
10 * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
17 *
18 * Based on cyberfb.c.
19 *
20 * Note that we now use the new fbcon fix, var and cmap scheme. We do
21 * still have to check which console is the currently displayed one
22 * however, especially for the colourmap stuff.
23 *
24 * We also use the new hotplug PCI subsystem. I'm not sure if there
25 * are any such cards, but I'm erring on the side of caution. We don't
26 * want to go pop just because someone does have one.
27 *
28 * Note that this doesn't work fully in the case of multiple CyberPro
29 * cards with grabbers. We currently can only attach to the first
30 * CyberPro card found.
31 *
32 * When we're in truecolour mode, we power down the LUT RAM as a power
33 * saving feature. Also, when we enter any of the powersaving modes
34 * (except soft blanking) we power down the RAMDACs. This saves about
35 * 1W, which is roughly 8% of the power consumption of a NetWinder
36 * (which, incidentally, is about the same saving as a 2.5in hard disk
37 * entering standby mode.)
38 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070039#include <linux/module.h>
40#include <linux/kernel.h>
41#include <linux/errno.h>
42#include <linux/string.h>
43#include <linux/mm.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070044#include <linux/slab.h>
45#include <linux/delay.h>
46#include <linux/fb.h>
47#include <linux/pci.h>
48#include <linux/init.h>
49
50#include <asm/io.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070051#include <asm/pgtable.h>
52#include <asm/system.h>
53#include <asm/uaccess.h>
54
55#ifdef __arm__
56#include <asm/mach-types.h>
57#endif
58
59#include "cyber2000fb.h"
60
61struct cfb_info {
62 struct fb_info fb;
63 struct display_switch *dispsw;
64 struct display *display;
65 struct pci_dev *dev;
66 unsigned char __iomem *region;
67 unsigned char __iomem *regs;
68 u_int id;
69 int func_use_count;
70 u_long ref_ps;
71
72 /*
73 * Clock divisors
74 */
75 u_int divisors[4];
76
77 struct {
78 u8 red, green, blue;
79 } palette[NR_PALETTE];
80
81 u_char mem_ctl1;
82 u_char mem_ctl2;
83 u_char mclk_mult;
84 u_char mclk_div;
85 /*
86 * RAMDAC control register is both of these or'ed together
87 */
88 u_char ramdac_ctrl;
89 u_char ramdac_powerdown;
Russell Kingeca02b02005-05-03 12:23:56 +010090
91 u32 pseudo_palette[16];
Linus Torvalds1da177e2005-04-16 15:20:36 -070092};
93
94static char *default_font = "Acorn8x8";
95module_param(default_font, charp, 0);
96MODULE_PARM_DESC(default_font, "Default font name");
97
98/*
99 * Our access methods.
100 */
101#define cyber2000fb_writel(val,reg,cfb) writel(val, (cfb)->regs + (reg))
102#define cyber2000fb_writew(val,reg,cfb) writew(val, (cfb)->regs + (reg))
103#define cyber2000fb_writeb(val,reg,cfb) writeb(val, (cfb)->regs + (reg))
104
105#define cyber2000fb_readb(reg,cfb) readb((cfb)->regs + (reg))
106
107static inline void
108cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
109{
110 cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
111}
112
113static inline void
114cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
115{
116 cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
117}
118
119static inline unsigned int
120cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
121{
122 cyber2000fb_writeb(reg, 0x3ce, cfb);
123 return cyber2000fb_readb(0x3cf, cfb);
124}
125
126static inline void
127cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
128{
129 cyber2000fb_readb(0x3da, cfb);
130 cyber2000fb_writeb(reg, 0x3c0, cfb);
131 cyber2000fb_readb(0x3c1, cfb);
132 cyber2000fb_writeb(val, 0x3c0, cfb);
133}
134
135static inline void
136cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
137{
138 cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
139}
140
141/* -------------------- Hardware specific routines ------------------------- */
142
143/*
144 * Hardware Cyber2000 Acceleration
145 */
146static void
147cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
148{
149 struct cfb_info *cfb = (struct cfb_info *)info;
150 unsigned long dst, col;
151
152 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
153 cfb_fillrect(info, rect);
154 return;
155 }
156
157 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
158 cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
159 cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
160
161 col = rect->color;
162 if (cfb->fb.var.bits_per_pixel > 8)
163 col = ((u32 *)cfb->fb.pseudo_palette)[col];
164 cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
165
166 dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
167 if (cfb->fb.var.bits_per_pixel == 24) {
168 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
169 dst *= 3;
170 }
171
172 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
173 cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
174 cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
175 cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
176}
177
178static void
179cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
180{
181 struct cfb_info *cfb = (struct cfb_info *)info;
182 unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
183 unsigned long src, dst;
184
185 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
186 cfb_copyarea(info, region);
187 return;
188 }
189
190 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
191 cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
192 cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
193
194 src = region->sx + region->sy * cfb->fb.var.xres_virtual;
195 dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
196
197 if (region->sx < region->dx) {
198 src += region->width - 1;
199 dst += region->width - 1;
200 cmd |= CO_CMD_L_INC_LEFT;
201 }
202
203 if (region->sy < region->dy) {
204 src += (region->height - 1) * cfb->fb.var.xres_virtual;
205 dst += (region->height - 1) * cfb->fb.var.xres_virtual;
206 cmd |= CO_CMD_L_INC_UP;
207 }
208
209 if (cfb->fb.var.bits_per_pixel == 24) {
210 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
211 src *= 3;
212 dst *= 3;
213 }
214 cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
215 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
216 cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
217 cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
218 cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
219 CO_REG_CMD_H, cfb);
220}
221
222static void
223cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
224{
225// struct cfb_info *cfb = (struct cfb_info *)info;
226
227// if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
228 cfb_imageblit(info, image);
229 return;
230// }
231}
232
233static int cyber2000fb_sync(struct fb_info *info)
234{
235 struct cfb_info *cfb = (struct cfb_info *)info;
236 int count = 100000;
237
238 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
239 return 0;
240
241 while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
242 if (!count--) {
243 debug_printf("accel_wait timed out\n");
244 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
245 break;
246 }
247 udelay(1);
248 }
249 return 0;
250}
251
252/*
253 * ===========================================================================
254 */
255
256static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
257{
258 u_int mask = (1 << bf->length) - 1;
259
260 return (val >> (16 - bf->length) & mask) << bf->offset;
261}
262
263/*
264 * Set a single color register. Return != 0 for invalid regno.
265 */
266static int
267cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
268 u_int transp, struct fb_info *info)
269{
270 struct cfb_info *cfb = (struct cfb_info *)info;
271 struct fb_var_screeninfo *var = &cfb->fb.var;
272 u32 pseudo_val;
273 int ret = 1;
274
275 switch (cfb->fb.fix.visual) {
276 default:
277 return 1;
278
279 /*
280 * Pseudocolour:
281 * 8 8
282 * pixel --/--+--/--> red lut --> red dac
283 * | 8
284 * +--/--> green lut --> green dac
285 * | 8
286 * +--/--> blue lut --> blue dac
287 */
288 case FB_VISUAL_PSEUDOCOLOR:
289 if (regno >= NR_PALETTE)
290 return 1;
291
292 red >>= 8;
293 green >>= 8;
294 blue >>= 8;
295
296 cfb->palette[regno].red = red;
297 cfb->palette[regno].green = green;
298 cfb->palette[regno].blue = blue;
299
300 cyber2000fb_writeb(regno, 0x3c8, cfb);
301 cyber2000fb_writeb(red, 0x3c9, cfb);
302 cyber2000fb_writeb(green, 0x3c9, cfb);
303 cyber2000fb_writeb(blue, 0x3c9, cfb);
304 return 0;
305
306 /*
307 * Direct colour:
308 * n rl
309 * pixel --/--+--/--> red lut --> red dac
310 * | gl
311 * +--/--> green lut --> green dac
312 * | bl
313 * +--/--> blue lut --> blue dac
314 * n = bpp, rl = red length, gl = green length, bl = blue length
315 */
316 case FB_VISUAL_DIRECTCOLOR:
317 red >>= 8;
318 green >>= 8;
319 blue >>= 8;
320
321 if (var->green.length == 6 && regno < 64) {
322 cfb->palette[regno << 2].green = green;
323
324 /*
325 * The 6 bits of the green component are applied
326 * to the high 6 bits of the LUT.
327 */
328 cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
329 cyber2000fb_writeb(cfb->palette[regno >> 1].red, 0x3c9, cfb);
330 cyber2000fb_writeb(green, 0x3c9, cfb);
331 cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 0x3c9, cfb);
332
333 green = cfb->palette[regno << 3].green;
334
335 ret = 0;
336 }
337
338 if (var->green.length >= 5 && regno < 32) {
339 cfb->palette[regno << 3].red = red;
340 cfb->palette[regno << 3].green = green;
341 cfb->palette[regno << 3].blue = blue;
342
343 /*
344 * The 5 bits of each colour component are
345 * applied to the high 5 bits of the LUT.
346 */
347 cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
348 cyber2000fb_writeb(red, 0x3c9, cfb);
349 cyber2000fb_writeb(green, 0x3c9, cfb);
350 cyber2000fb_writeb(blue, 0x3c9, cfb);
351 ret = 0;
352 }
353
354 if (var->green.length == 4 && regno < 16) {
355 cfb->palette[regno << 4].red = red;
356 cfb->palette[regno << 4].green = green;
357 cfb->palette[regno << 4].blue = blue;
358
359 /*
360 * The 5 bits of each colour component are
361 * applied to the high 5 bits of the LUT.
362 */
363 cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
364 cyber2000fb_writeb(red, 0x3c9, cfb);
365 cyber2000fb_writeb(green, 0x3c9, cfb);
366 cyber2000fb_writeb(blue, 0x3c9, cfb);
367 ret = 0;
368 }
369
370 /*
371 * Since this is only used for the first 16 colours, we
372 * don't have to care about overflowing for regno >= 32
373 */
374 pseudo_val = regno << var->red.offset |
375 regno << var->green.offset |
376 regno << var->blue.offset;
377 break;
378
379 /*
380 * True colour:
381 * n rl
382 * pixel --/--+--/--> red dac
383 * | gl
384 * +--/--> green dac
385 * | bl
386 * +--/--> blue dac
387 * n = bpp, rl = red length, gl = green length, bl = blue length
388 */
389 case FB_VISUAL_TRUECOLOR:
390 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
391 pseudo_val |= convert_bitfield(red, &var->red);
392 pseudo_val |= convert_bitfield(green, &var->green);
393 pseudo_val |= convert_bitfield(blue, &var->blue);
394 break;
395 }
396
397 /*
398 * Now set our pseudo palette for the CFB16/24/32 drivers.
399 */
400 if (regno < 16)
401 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
402
403 return ret;
404}
405
406struct par_info {
407 /*
408 * Hardware
409 */
410 u_char clock_mult;
411 u_char clock_div;
412 u_char extseqmisc;
413 u_char co_pixfmt;
414 u_char crtc_ofl;
415 u_char crtc[19];
416 u_int width;
417 u_int pitch;
418 u_int fetch;
419
420 /*
421 * Other
422 */
423 u_char ramdac;
424};
425
426static const u_char crtc_idx[] = {
427 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
428 0x08, 0x09,
429 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
430};
431
432static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
433{
434 unsigned int i;
435 unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
436
437 cyber2000fb_writeb(0x56, 0x3ce, cfb);
438 i = cyber2000fb_readb(0x3cf, cfb);
439 cyber2000fb_writeb(i | 4, 0x3cf, cfb);
440 cyber2000fb_writeb(val, 0x3c6, cfb);
441 cyber2000fb_writeb(i, 0x3cf, cfb);
442}
443
444static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
445{
446 u_int i;
447
448 /*
449 * Blank palette
450 */
451 for (i = 0; i < NR_PALETTE; i++) {
452 cyber2000fb_writeb(i, 0x3c8, cfb);
453 cyber2000fb_writeb(0, 0x3c9, cfb);
454 cyber2000fb_writeb(0, 0x3c9, cfb);
455 cyber2000fb_writeb(0, 0x3c9, cfb);
456 }
457
458 cyber2000fb_writeb(0xef, 0x3c2, cfb);
459 cyber2000_crtcw(0x11, 0x0b, cfb);
460 cyber2000_attrw(0x11, 0x00, cfb);
461
462 cyber2000_seqw(0x00, 0x01, cfb);
463 cyber2000_seqw(0x01, 0x01, cfb);
464 cyber2000_seqw(0x02, 0x0f, cfb);
465 cyber2000_seqw(0x03, 0x00, cfb);
466 cyber2000_seqw(0x04, 0x0e, cfb);
467 cyber2000_seqw(0x00, 0x03, cfb);
468
469 for (i = 0; i < sizeof(crtc_idx); i++)
470 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
471
472 for (i = 0x0a; i < 0x10; i++)
473 cyber2000_crtcw(i, 0, cfb);
474
475 cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
476 cyber2000_grphw(0x00, 0x00, cfb);
477 cyber2000_grphw(0x01, 0x00, cfb);
478 cyber2000_grphw(0x02, 0x00, cfb);
479 cyber2000_grphw(0x03, 0x00, cfb);
480 cyber2000_grphw(0x04, 0x00, cfb);
481 cyber2000_grphw(0x05, 0x60, cfb);
482 cyber2000_grphw(0x06, 0x05, cfb);
483 cyber2000_grphw(0x07, 0x0f, cfb);
484 cyber2000_grphw(0x08, 0xff, cfb);
485
486 /* Attribute controller registers */
487 for (i = 0; i < 16; i++)
488 cyber2000_attrw(i, i, cfb);
489
490 cyber2000_attrw(0x10, 0x01, cfb);
491 cyber2000_attrw(0x11, 0x00, cfb);
492 cyber2000_attrw(0x12, 0x0f, cfb);
493 cyber2000_attrw(0x13, 0x00, cfb);
494 cyber2000_attrw(0x14, 0x00, cfb);
495
496 /* PLL registers */
497 cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
498 cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
499 cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
500 cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
501 cyber2000_grphw(0x90, 0x01, cfb);
502 cyber2000_grphw(0xb9, 0x80, cfb);
503 cyber2000_grphw(0xb9, 0x00, cfb);
504
505 cfb->ramdac_ctrl = hw->ramdac;
506 cyber2000fb_write_ramdac_ctrl(cfb);
507
508 cyber2000fb_writeb(0x20, 0x3c0, cfb);
509 cyber2000fb_writeb(0xff, 0x3c6, cfb);
510
511 cyber2000_grphw(0x14, hw->fetch, cfb);
512 cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
513 ((hw->pitch >> 4) & 0x30), cfb);
514 cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
515
516 /*
517 * Set up accelerator registers
518 */
519 cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
520 cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
521 cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
522}
523
524static inline int
525cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
526{
527 u_int base = var->yoffset * var->xres_virtual + var->xoffset;
528
529 base *= var->bits_per_pixel;
530
531 /*
532 * Convert to bytes and shift two extra bits because DAC
533 * can only start on 4 byte aligned data.
534 */
535 base >>= 5;
536
537 if (base >= 1 << 20)
538 return -EINVAL;
539
540 cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
541 cyber2000_crtcw(0x0c, base >> 8, cfb);
542 cyber2000_crtcw(0x0d, base, cfb);
543
544 return 0;
545}
546
547static int
548cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
549 struct fb_var_screeninfo *var)
550{
551 u_int Htotal, Hblankend, Hsyncend;
552 u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
553#define BIT(v,b1,m,b2) (((v >> b1) & m) << b2)
554
555 hw->crtc[13] = hw->pitch;
556 hw->crtc[17] = 0xe3;
557 hw->crtc[14] = 0;
558 hw->crtc[8] = 0;
559
560 Htotal = var->xres + var->right_margin +
561 var->hsync_len + var->left_margin;
562
563 if (Htotal > 2080)
564 return -EINVAL;
565
566 hw->crtc[0] = (Htotal >> 3) - 5;
567 hw->crtc[1] = (var->xres >> 3) - 1;
568 hw->crtc[2] = var->xres >> 3;
569 hw->crtc[4] = (var->xres + var->right_margin) >> 3;
570
571 Hblankend = (Htotal - 4*8) >> 3;
572
573 hw->crtc[3] = BIT(Hblankend, 0, 0x1f, 0) |
574 BIT(1, 0, 0x01, 7);
575
576 Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3;
577
578 hw->crtc[5] = BIT(Hsyncend, 0, 0x1f, 0) |
579 BIT(Hblankend, 5, 0x01, 7);
580
581 Vdispend = var->yres - 1;
582 Vsyncstart = var->yres + var->lower_margin;
583 Vsyncend = var->yres + var->lower_margin + var->vsync_len;
584 Vtotal = var->yres + var->lower_margin + var->vsync_len +
585 var->upper_margin - 2;
586
587 if (Vtotal > 2047)
588 return -EINVAL;
589
590 Vblankstart = var->yres + 6;
591 Vblankend = Vtotal - 10;
592
593 hw->crtc[6] = Vtotal;
594 hw->crtc[7] = BIT(Vtotal, 8, 0x01, 0) |
595 BIT(Vdispend, 8, 0x01, 1) |
596 BIT(Vsyncstart, 8, 0x01, 2) |
597 BIT(Vblankstart,8, 0x01, 3) |
598 BIT(1, 0, 0x01, 4) |
599 BIT(Vtotal, 9, 0x01, 5) |
600 BIT(Vdispend, 9, 0x01, 6) |
601 BIT(Vsyncstart, 9, 0x01, 7);
602 hw->crtc[9] = BIT(0, 0, 0x1f, 0) |
603 BIT(Vblankstart,9, 0x01, 5) |
604 BIT(1, 0, 0x01, 6);
605 hw->crtc[10] = Vsyncstart;
606 hw->crtc[11] = BIT(Vsyncend, 0, 0x0f, 0) |
607 BIT(1, 0, 0x01, 7);
608 hw->crtc[12] = Vdispend;
609 hw->crtc[15] = Vblankstart;
610 hw->crtc[16] = Vblankend;
611 hw->crtc[18] = 0xff;
612
613 /*
614 * overflow - graphics reg 0x11
615 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
616 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
617 */
618 hw->crtc_ofl =
619 BIT(Vtotal, 10, 0x01, 0) |
620 BIT(Vdispend, 10, 0x01, 1) |
621 BIT(Vsyncstart, 10, 0x01, 2) |
622 BIT(Vblankstart,10, 0x01, 3) |
623 EXT_CRT_VRTOFL_LINECOMP10;
624
625 /* woody: set the interlaced bit... */
626 /* FIXME: what about doublescan? */
627 if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
628 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
629
630 return 0;
631}
632
633/*
634 * The following was discovered by a good monitor, bit twiddling, theorising
635 * and but mostly luck. Strangely, it looks like everyone elses' PLL!
636 *
637 * Clock registers:
638 * fclock = fpll / div2
639 * fpll = fref * mult / div1
640 * where:
641 * fref = 14.318MHz (69842ps)
642 * mult = reg0xb0.7:0
643 * div1 = (reg0xb1.5:0 + 1)
644 * div2 = 2^(reg0xb1.7:6)
645 * fpll should be between 115 and 260 MHz
646 * (8696ps and 3846ps)
647 */
648static int
649cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
650 struct fb_var_screeninfo *var)
651{
652 u_long pll_ps = var->pixclock;
653 const u_long ref_ps = cfb->ref_ps;
654 u_int div2, t_div1, best_div1, best_mult;
655 int best_diff;
656 int vco;
657
658 /*
659 * Step 1:
660 * find div2 such that 115MHz < fpll < 260MHz
661 * and 0 <= div2 < 4
662 */
663 for (div2 = 0; div2 < 4; div2++) {
664 u_long new_pll;
665
666 new_pll = pll_ps / cfb->divisors[div2];
667 if (8696 > new_pll && new_pll > 3846) {
668 pll_ps = new_pll;
669 break;
670 }
671 }
672
673 if (div2 == 4)
674 return -EINVAL;
675
676 /*
677 * Step 2:
678 * Given pll_ps and ref_ps, find:
679 * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
680 * where { 1 < best_div1 < 32, 1 < best_mult < 256 }
681 * pll_ps_calc = best_div1 / (ref_ps * best_mult)
682 */
683 best_diff = 0x7fffffff;
684 best_mult = 32;
685 best_div1 = 255;
686 for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) {
687 u_int rr, t_mult, t_pll_ps;
688 int diff;
689
690 /*
691 * Find the multiplier for this divisor
692 */
693 rr = ref_ps * t_div1;
694 t_mult = (rr + pll_ps / 2) / pll_ps;
695
696 /*
697 * Is the multiplier within the correct range?
698 */
699 if (t_mult > 256 || t_mult < 2)
700 continue;
701
702 /*
703 * Calculate the actual clock period from this multiplier
704 * and divisor, and estimate the error.
705 */
706 t_pll_ps = (rr + t_mult / 2) / t_mult;
707 diff = pll_ps - t_pll_ps;
708 if (diff < 0)
709 diff = -diff;
710
711 if (diff < best_diff) {
712 best_diff = diff;
713 best_mult = t_mult;
714 best_div1 = t_div1;
715 }
716
717 /*
718 * If we hit an exact value, there is no point in continuing.
719 */
720 if (diff == 0)
721 break;
722 }
723
724 /*
725 * Step 3:
726 * combine values
727 */
728 hw->clock_mult = best_mult - 1;
729 hw->clock_div = div2 << 6 | (best_div1 - 1);
730
731 vco = ref_ps * best_div1 / best_mult;
732 if ((ref_ps == 40690) && (vco < 5556))
733 /* Set VFSEL when VCO > 180MHz (5.556 ps). */
734 hw->clock_div |= EXT_DCLK_DIV_VFSEL;
735
736 return 0;
737}
738
739/*
740 * Set the User Defined Part of the Display
741 */
742static int
743cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
744{
745 struct cfb_info *cfb = (struct cfb_info *)info;
746 struct par_info hw;
747 unsigned int mem;
748 int err;
749
750 var->transp.msb_right = 0;
751 var->red.msb_right = 0;
752 var->green.msb_right = 0;
753 var->blue.msb_right = 0;
754
755 switch (var->bits_per_pixel) {
756 case 8: /* PSEUDOCOLOUR, 256 */
757 var->transp.offset = 0;
758 var->transp.length = 0;
759 var->red.offset = 0;
760 var->red.length = 8;
761 var->green.offset = 0;
762 var->green.length = 8;
763 var->blue.offset = 0;
764 var->blue.length = 8;
765 break;
766
767 case 16:/* DIRECTCOLOUR, 64k or 32k */
768 switch (var->green.length) {
769 case 6: /* RGB565, 64k */
770 var->transp.offset = 0;
771 var->transp.length = 0;
772 var->red.offset = 11;
773 var->red.length = 5;
774 var->green.offset = 5;
775 var->green.length = 6;
776 var->blue.offset = 0;
777 var->blue.length = 5;
778 break;
779
780 default:
781 case 5: /* RGB555, 32k */
782 var->transp.offset = 0;
783 var->transp.length = 0;
784 var->red.offset = 10;
785 var->red.length = 5;
786 var->green.offset = 5;
787 var->green.length = 5;
788 var->blue.offset = 0;
789 var->blue.length = 5;
790 break;
791
792 case 4: /* RGB444, 4k + transparency? */
793 var->transp.offset = 12;
794 var->transp.length = 4;
795 var->red.offset = 8;
796 var->red.length = 4;
797 var->green.offset = 4;
798 var->green.length = 4;
799 var->blue.offset = 0;
800 var->blue.length = 4;
801 break;
802 }
803 break;
804
805 case 24:/* TRUECOLOUR, 16m */
806 var->transp.offset = 0;
807 var->transp.length = 0;
808 var->red.offset = 16;
809 var->red.length = 8;
810 var->green.offset = 8;
811 var->green.length = 8;
812 var->blue.offset = 0;
813 var->blue.length = 8;
814 break;
815
816 case 32:/* TRUECOLOUR, 16m */
817 var->transp.offset = 24;
818 var->transp.length = 8;
819 var->red.offset = 16;
820 var->red.length = 8;
821 var->green.offset = 8;
822 var->green.length = 8;
823 var->blue.offset = 0;
824 var->blue.length = 8;
825 break;
826
827 default:
828 return -EINVAL;
829 }
830
831 mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
832 if (mem > cfb->fb.fix.smem_len)
833 var->yres_virtual = cfb->fb.fix.smem_len * 8 /
834 (var->bits_per_pixel * var->xres_virtual);
835
836 if (var->yres > var->yres_virtual)
837 var->yres = var->yres_virtual;
838 if (var->xres > var->xres_virtual)
839 var->xres = var->xres_virtual;
840
841 err = cyber2000fb_decode_clock(&hw, cfb, var);
842 if (err)
843 return err;
844
845 err = cyber2000fb_decode_crtc(&hw, cfb, var);
846 if (err)
847 return err;
848
849 return 0;
850}
851
852static int cyber2000fb_set_par(struct fb_info *info)
853{
854 struct cfb_info *cfb = (struct cfb_info *)info;
855 struct fb_var_screeninfo *var = &cfb->fb.var;
856 struct par_info hw;
857 unsigned int mem;
858
859 hw.width = var->xres_virtual;
860 hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
861
862 switch (var->bits_per_pixel) {
863 case 8:
864 hw.co_pixfmt = CO_PIXFMT_8BPP;
865 hw.pitch = hw.width >> 3;
866 hw.extseqmisc = EXT_SEQ_MISC_8;
867 break;
868
869 case 16:
870 hw.co_pixfmt = CO_PIXFMT_16BPP;
871 hw.pitch = hw.width >> 2;
872
873 switch (var->green.length) {
874 case 6: /* RGB565, 64k */
875 hw.extseqmisc = EXT_SEQ_MISC_16_RGB565;
876 break;
877 case 5: /* RGB555, 32k */
878 hw.extseqmisc = EXT_SEQ_MISC_16_RGB555;
879 break;
880 case 4: /* RGB444, 4k + transparency? */
881 hw.extseqmisc = EXT_SEQ_MISC_16_RGB444;
882 break;
883 default:
884 BUG();
885 }
886 case 24:/* TRUECOLOUR, 16m */
887 hw.co_pixfmt = CO_PIXFMT_24BPP;
888 hw.width *= 3;
889 hw.pitch = hw.width >> 3;
890 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
891 hw.extseqmisc = EXT_SEQ_MISC_24_RGB888;
892 break;
893
894 case 32:/* TRUECOLOUR, 16m */
895 hw.co_pixfmt = CO_PIXFMT_32BPP;
896 hw.pitch = hw.width >> 1;
897 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
898 hw.extseqmisc = EXT_SEQ_MISC_32;
899 break;
900
901 default:
902 BUG();
903 }
904
905 /*
906 * Sigh, this is absolutely disgusting, but caused by
907 * the way the fbcon developers want to separate out
908 * the "checking" and the "setting" of the video mode.
909 *
910 * If the mode is not suitable for the hardware here,
911 * we can't prevent it being set by returning an error.
912 *
913 * In theory, since NetWinders contain just one VGA card,
914 * we should never end up hitting this problem.
915 */
916 BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
917 BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
918
919 hw.width -= 1;
920 hw.fetch = hw.pitch;
921 if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
922 hw.fetch <<= 1;
923 hw.fetch += 1;
924
925 cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
926
927 /*
928 * Same here - if the size of the video mode exceeds the
929 * available RAM, we can't prevent this mode being set.
930 *
931 * In theory, since NetWinders contain just one VGA card,
932 * we should never end up hitting this problem.
933 */
934 mem = cfb->fb.fix.line_length * var->yres_virtual;
935 BUG_ON(mem > cfb->fb.fix.smem_len);
936
937 /*
938 * 8bpp displays are always pseudo colour. 16bpp and above
939 * are direct colour or true colour, depending on whether
940 * the RAMDAC palettes are bypassed. (Direct colour has
941 * palettes, true colour does not.)
942 */
943 if (var->bits_per_pixel == 8)
944 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
945 else if (hw.ramdac & RAMDAC_BYPASS)
946 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
947 else
948 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
949
950 cyber2000fb_set_timing(cfb, &hw);
951 cyber2000fb_update_start(cfb, var);
952
953 return 0;
954}
955
956
957/*
958 * Pan or Wrap the Display
959 */
960static int
961cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
962{
963 struct cfb_info *cfb = (struct cfb_info *)info;
964
965 if (cyber2000fb_update_start(cfb, var))
966 return -EINVAL;
967
968 cfb->fb.var.xoffset = var->xoffset;
969 cfb->fb.var.yoffset = var->yoffset;
970
971 if (var->vmode & FB_VMODE_YWRAP) {
972 cfb->fb.var.vmode |= FB_VMODE_YWRAP;
973 } else {
974 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
975 }
976
977 return 0;
978}
979
980/*
981 * (Un)Blank the display.
982 *
983 * Blank the screen if blank_mode != 0, else unblank. If
984 * blank == NULL then the caller blanks by setting the CLUT
985 * (Color Look Up Table) to all black. Return 0 if blanking
986 * succeeded, != 0 if un-/blanking failed due to e.g. a
987 * video mode which doesn't support it. Implements VESA
988 * suspend and powerdown modes on hardware that supports
989 * disabling hsync/vsync:
990 * blank_mode == 2: suspend vsync
991 * blank_mode == 3: suspend hsync
992 * blank_mode == 4: powerdown
993 *
994 * wms...Enable VESA DMPS compatible powerdown mode
995 * run "setterm -powersave powerdown" to take advantage
996 */
997static int cyber2000fb_blank(int blank, struct fb_info *info)
998{
999 struct cfb_info *cfb = (struct cfb_info *)info;
1000 unsigned int sync = 0;
1001 int i;
1002
1003 switch (blank) {
1004 case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
1005 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
1006 break;
1007 case FB_BLANK_HSYNC_SUSPEND: /* hsync off */
1008 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
1009 break;
1010 case FB_BLANK_VSYNC_SUSPEND: /* vsync off */
1011 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
1012 break;
1013 case FB_BLANK_NORMAL: /* soft blank */
1014 default: /* unblank */
1015 break;
1016 }
1017
1018 cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
1019
1020 if (blank <= 1) {
1021 /* turn on ramdacs */
1022 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
1023 cyber2000fb_write_ramdac_ctrl(cfb);
1024 }
1025
1026 /*
1027 * Soft blank/unblank the display.
1028 */
1029 if (blank) { /* soft blank */
1030 for (i = 0; i < NR_PALETTE; i++) {
1031 cyber2000fb_writeb(i, 0x3c8, cfb);
1032 cyber2000fb_writeb(0, 0x3c9, cfb);
1033 cyber2000fb_writeb(0, 0x3c9, cfb);
1034 cyber2000fb_writeb(0, 0x3c9, cfb);
1035 }
1036 } else { /* unblank */
1037 for (i = 0; i < NR_PALETTE; i++) {
1038 cyber2000fb_writeb(i, 0x3c8, cfb);
1039 cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
1040 cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
1041 cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
1042 }
1043 }
1044
1045 if (blank >= 2) {
1046 /* turn off ramdacs */
1047 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN;
1048 cyber2000fb_write_ramdac_ctrl(cfb);
1049 }
1050
1051 return 0;
1052}
1053
1054static struct fb_ops cyber2000fb_ops = {
1055 .owner = THIS_MODULE,
1056 .fb_check_var = cyber2000fb_check_var,
1057 .fb_set_par = cyber2000fb_set_par,
1058 .fb_setcolreg = cyber2000fb_setcolreg,
1059 .fb_blank = cyber2000fb_blank,
1060 .fb_pan_display = cyber2000fb_pan_display,
1061 .fb_fillrect = cyber2000fb_fillrect,
1062 .fb_copyarea = cyber2000fb_copyarea,
1063 .fb_imageblit = cyber2000fb_imageblit,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001064 .fb_sync = cyber2000fb_sync,
1065};
1066
1067/*
1068 * This is the only "static" reference to the internal data structures
1069 * of this driver. It is here solely at the moment to support the other
1070 * CyberPro modules external to this driver.
1071 */
1072static struct cfb_info *int_cfb_info;
1073
1074/*
1075 * Enable access to the extended registers
1076 */
1077void cyber2000fb_enable_extregs(struct cfb_info *cfb)
1078{
1079 cfb->func_use_count += 1;
1080
1081 if (cfb->func_use_count == 1) {
1082 int old;
1083
1084 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1085 old |= EXT_FUNC_CTL_EXTREGENBL;
1086 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1087 }
1088}
1089
1090/*
1091 * Disable access to the extended registers
1092 */
1093void cyber2000fb_disable_extregs(struct cfb_info *cfb)
1094{
1095 if (cfb->func_use_count == 1) {
1096 int old;
1097
1098 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1099 old &= ~EXT_FUNC_CTL_EXTREGENBL;
1100 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1101 }
1102
1103 if (cfb->func_use_count == 0)
1104 printk(KERN_ERR "disable_extregs: count = 0\n");
1105 else
1106 cfb->func_use_count -= 1;
1107}
1108
1109void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var)
1110{
1111 memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo));
1112}
1113
1114/*
1115 * Attach a capture/tv driver to the core CyberX0X0 driver.
1116 */
1117int cyber2000fb_attach(struct cyberpro_info *info, int idx)
1118{
1119 if (int_cfb_info != NULL) {
1120 info->dev = int_cfb_info->dev;
1121 info->regs = int_cfb_info->regs;
1122 info->fb = int_cfb_info->fb.screen_base;
1123 info->fb_size = int_cfb_info->fb.fix.smem_len;
1124 info->enable_extregs = cyber2000fb_enable_extregs;
1125 info->disable_extregs = cyber2000fb_disable_extregs;
1126 info->info = int_cfb_info;
1127
1128 strlcpy(info->dev_name, int_cfb_info->fb.fix.id, sizeof(info->dev_name));
1129 }
1130
1131 return int_cfb_info != NULL;
1132}
1133
1134/*
1135 * Detach a capture/tv driver from the core CyberX0X0 driver.
1136 */
1137void cyber2000fb_detach(int idx)
1138{
1139}
1140
1141EXPORT_SYMBOL(cyber2000fb_attach);
1142EXPORT_SYMBOL(cyber2000fb_detach);
1143EXPORT_SYMBOL(cyber2000fb_enable_extregs);
1144EXPORT_SYMBOL(cyber2000fb_disable_extregs);
1145EXPORT_SYMBOL(cyber2000fb_get_fb_var);
1146
1147/*
1148 * These parameters give
1149 * 640x480, hsync 31.5kHz, vsync 60Hz
1150 */
1151static struct fb_videomode __devinitdata cyber2000fb_default_mode = {
1152 .refresh = 60,
1153 .xres = 640,
1154 .yres = 480,
1155 .pixclock = 39722,
1156 .left_margin = 56,
1157 .right_margin = 16,
1158 .upper_margin = 34,
1159 .lower_margin = 9,
1160 .hsync_len = 88,
1161 .vsync_len = 2,
1162 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1163 .vmode = FB_VMODE_NONINTERLACED
1164};
1165
1166static char igs_regs[] = {
1167 EXT_CRT_IRQ, 0,
1168 EXT_CRT_TEST, 0,
1169 EXT_SYNC_CTL, 0,
1170 EXT_SEG_WRITE_PTR, 0,
1171 EXT_SEG_READ_PTR, 0,
1172 EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE |
1173 EXT_BIU_MISC_COP_ENABLE |
1174 EXT_BIU_MISC_COP_BFC,
1175 EXT_FUNC_CTL, 0,
1176 CURS_H_START, 0,
1177 CURS_H_START + 1, 0,
1178 CURS_H_PRESET, 0,
1179 CURS_V_START, 0,
1180 CURS_V_START + 1, 0,
1181 CURS_V_PRESET, 0,
1182 CURS_CTL, 0,
1183 EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT,
1184 EXT_OVERSCAN_RED, 0,
1185 EXT_OVERSCAN_GREEN, 0,
1186 EXT_OVERSCAN_BLUE, 0,
1187
1188 /* some of these are questionable when we have a BIOS */
1189 EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK |
1190 EXT_MEM_CTL0_RAS_1 |
1191 EXT_MEM_CTL0_MULTCAS,
1192 EXT_HIDDEN_CTL1, 0x30,
1193 EXT_FIFO_CTL, 0x0b,
1194 EXT_FIFO_CTL + 1, 0x17,
1195 0x76, 0x00,
1196 EXT_HIDDEN_CTL4, 0xc8
1197};
1198
1199/*
1200 * Initialise the CyberPro hardware. On the CyberPro5XXXX,
1201 * ensure that we're using the correct PLL (5XXX's may be
1202 * programmed to use an additional set of PLLs.)
1203 */
1204static void cyberpro_init_hw(struct cfb_info *cfb)
1205{
1206 int i;
1207
1208 for (i = 0; i < sizeof(igs_regs); i += 2)
1209 cyber2000_grphw(igs_regs[i], igs_regs[i+1], cfb);
1210
1211 if (cfb->id == ID_CYBERPRO_5000) {
1212 unsigned char val;
1213 cyber2000fb_writeb(0xba, 0x3ce, cfb);
1214 val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
1215 cyber2000fb_writeb(val, 0x3cf, cfb);
1216 }
1217}
1218
1219static struct cfb_info * __devinit
1220cyberpro_alloc_fb_info(unsigned int id, char *name)
1221{
1222 struct cfb_info *cfb;
1223
Yoann Padioleaudd00cc42007-07-19 01:49:03 -07001224 cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001225 if (!cfb)
1226 return NULL;
1227
Linus Torvalds1da177e2005-04-16 15:20:36 -07001228
1229 cfb->id = id;
1230
1231 if (id == ID_CYBERPRO_5000)
1232 cfb->ref_ps = 40690; // 24.576 MHz
1233 else
1234 cfb->ref_ps = 69842; // 14.31818 MHz (69841?)
1235
1236 cfb->divisors[0] = 1;
1237 cfb->divisors[1] = 2;
1238 cfb->divisors[2] = 4;
1239
1240 if (id == ID_CYBERPRO_2000)
1241 cfb->divisors[3] = 8;
1242 else
1243 cfb->divisors[3] = 6;
1244
1245 strcpy(cfb->fb.fix.id, name);
1246
1247 cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
1248 cfb->fb.fix.type_aux = 0;
1249 cfb->fb.fix.xpanstep = 0;
1250 cfb->fb.fix.ypanstep = 1;
1251 cfb->fb.fix.ywrapstep = 0;
1252
1253 switch (id) {
1254 case ID_IGA_1682:
1255 cfb->fb.fix.accel = 0;
1256 break;
1257
1258 case ID_CYBERPRO_2000:
1259 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
1260 break;
1261
1262 case ID_CYBERPRO_2010:
1263 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
1264 break;
1265
1266 case ID_CYBERPRO_5000:
1267 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
1268 break;
1269 }
1270
1271 cfb->fb.var.nonstd = 0;
1272 cfb->fb.var.activate = FB_ACTIVATE_NOW;
1273 cfb->fb.var.height = -1;
1274 cfb->fb.var.width = -1;
1275 cfb->fb.var.accel_flags = FB_ACCELF_TEXT;
1276
1277 cfb->fb.fbops = &cyber2000fb_ops;
1278 cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
Russell Kingeca02b02005-05-03 12:23:56 +01001279 cfb->fb.pseudo_palette = cfb->pseudo_palette;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001280
1281 fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
1282
1283 return cfb;
1284}
1285
1286static void
1287cyberpro_free_fb_info(struct cfb_info *cfb)
1288{
1289 if (cfb) {
1290 /*
1291 * Free the colourmap
1292 */
1293 fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
1294
1295 kfree(cfb);
1296 }
1297}
1298
1299/*
1300 * Parse Cyber2000fb options. Usage:
1301 * video=cyber2000:font:fontname
1302 */
1303#ifndef MODULE
1304static int
1305cyber2000fb_setup(char *options)
1306{
1307 char *opt;
1308
1309 if (!options || !*options)
1310 return 0;
1311
1312 while ((opt = strsep(&options, ",")) != NULL) {
1313 if (!*opt)
1314 continue;
1315
1316 if (strncmp(opt, "font:", 5) == 0) {
1317 static char default_font_storage[40];
1318
1319 strlcpy(default_font_storage, opt + 5, sizeof(default_font_storage));
1320 default_font = default_font_storage;
1321 continue;
1322 }
1323
1324 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
1325 }
1326 return 0;
1327}
1328#endif /* MODULE */
1329
1330/*
1331 * The CyberPro chips can be placed on many different bus types.
1332 * This probe function is common to all bus types. The bus-specific
1333 * probe function is expected to have:
1334 * - enabled access to the linear memory region
1335 * - memory mapped access to the registers
1336 * - initialised mem_ctl1 and mem_ctl2 appropriately.
1337 */
1338static int __devinit cyberpro_common_probe(struct cfb_info *cfb)
1339{
1340 u_long smem_size;
1341 u_int h_sync, v_sync;
1342 int err;
1343
1344 cyberpro_init_hw(cfb);
1345
1346 /*
1347 * Get the video RAM size and width from the VGA register.
1348 * This should have been already initialised by the BIOS,
1349 * but if it's garbage, claim default 1MB VRAM (woody)
1350 */
1351 cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
1352 cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
1353
1354 /*
1355 * Determine the size of the memory.
1356 */
1357 switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
1358 case MEM_CTL2_SIZE_4MB: smem_size = 0x00400000; break;
1359 case MEM_CTL2_SIZE_2MB: smem_size = 0x00200000; break;
1360 case MEM_CTL2_SIZE_1MB: smem_size = 0x00100000; break;
1361 default: smem_size = 0x00100000; break;
1362 }
1363
1364 cfb->fb.fix.smem_len = smem_size;
1365 cfb->fb.fix.mmio_len = MMIO_SIZE;
1366 cfb->fb.screen_base = cfb->region;
1367
1368 err = -EINVAL;
1369 if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
1370 &cyber2000fb_default_mode, 8)) {
1371 printk("%s: no valid mode found\n", cfb->fb.fix.id);
1372 goto failed;
1373 }
1374
1375 cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
1376 (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
1377
1378 if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
1379 cfb->fb.var.yres_virtual = cfb->fb.var.yres;
1380
1381// fb_set_var(&cfb->fb.var, -1, &cfb->fb);
1382
1383 /*
1384 * Calculate the hsync and vsync frequencies. Note that
1385 * we split the 1e12 constant up so that we can preserve
1386 * the precision and fit the results into 32-bit registers.
1387 * (1953125000 * 512 = 1e12)
1388 */
1389 h_sync = 1953125000 / cfb->fb.var.pixclock;
1390 h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
1391 cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
1392 v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
1393 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
1394
1395 printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
1396 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
1397 cfb->fb.var.xres, cfb->fb.var.yres,
1398 h_sync / 1000, h_sync % 1000, v_sync);
1399
1400 if (cfb->dev)
1401 cfb->fb.device = &cfb->dev->dev;
1402 err = register_framebuffer(&cfb->fb);
1403
1404failed:
1405 return err;
1406}
1407
1408static void cyberpro_common_resume(struct cfb_info *cfb)
1409{
1410 cyberpro_init_hw(cfb);
1411
1412 /*
1413 * Reprogram the MEM_CTL1 and MEM_CTL2 registers
1414 */
1415 cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
1416 cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
1417
1418 /*
1419 * Restore the old video mode and the palette.
1420 * We also need to tell fbcon to redraw the console.
1421 */
1422 cyber2000fb_set_par(&cfb->fb);
1423}
1424
1425#ifdef CONFIG_ARCH_SHARK
1426
1427#include <asm/arch/hardware.h>
1428
1429static int __devinit
1430cyberpro_vl_probe(void)
1431{
1432 struct cfb_info *cfb;
1433 int err = -ENOMEM;
1434
1435 if (!request_mem_region(FB_START,FB_SIZE,"CyberPro2010")) return err;
1436
1437 cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
1438 if (!cfb)
1439 goto failed_release;
1440
1441 cfb->dev = NULL;
1442 cfb->region = ioremap(FB_START,FB_SIZE);
1443 if (!cfb->region)
1444 goto failed_ioremap;
1445
1446 cfb->regs = cfb->region + MMIO_OFFSET;
1447 cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
1448 cfb->fb.fix.smem_start = FB_START;
1449
1450 /*
1451 * Bring up the hardware. This is expected to enable access
1452 * to the linear memory region, and allow access to the memory
1453 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
1454 * initialised.
1455 */
1456 cyber2000fb_writeb(0x18, 0x46e8, cfb);
1457 cyber2000fb_writeb(0x01, 0x102, cfb);
1458 cyber2000fb_writeb(0x08, 0x46e8, cfb);
1459 cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
1460 cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
1461
1462 cfb->mclk_mult = 0xdb;
1463 cfb->mclk_div = 0x54;
1464
1465 err = cyberpro_common_probe(cfb);
1466 if (err)
1467 goto failed;
1468
1469 if (int_cfb_info == NULL)
1470 int_cfb_info = cfb;
1471
1472 return 0;
1473
1474failed:
1475 iounmap(cfb->region);
1476failed_ioremap:
1477 cyberpro_free_fb_info(cfb);
1478failed_release:
1479 release_mem_region(FB_START,FB_SIZE);
1480
1481 return err;
1482}
1483#endif /* CONFIG_ARCH_SHARK */
1484
1485/*
1486 * PCI specific support.
1487 */
1488#ifdef CONFIG_PCI
1489/*
1490 * We need to wake up the CyberPro, and make sure its in linear memory
1491 * mode. Unfortunately, this is specific to the platform and card that
1492 * we are running on.
1493 *
1494 * On x86 and ARM, should we be initialising the CyberPro first via the
1495 * IO registers, and then the MMIO registers to catch all cases? Can we
1496 * end up in the situation where the chip is in MMIO mode, but not awake
1497 * on an x86 system?
1498 */
1499static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
1500{
1501 unsigned char val;
1502
1503#if defined(__sparc_v9__)
1504#error "You lose, consult DaveM."
1505#elif defined(__sparc__)
1506 /*
1507 * SPARC does not have an "outb" instruction, so we generate
1508 * I/O cycles storing into a reserved memory space at
1509 * physical address 0x3000000
1510 */
Al Virocd030662005-12-15 09:18:10 +00001511 unsigned char __iomem *iop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001512
1513 iop = ioremap(0x3000000, 0x5000);
1514 if (iop == NULL) {
1515 prom_printf("iga5000: cannot map I/O\n");
1516 return -ENOMEM;
1517 }
1518
1519 writeb(0x18, iop + 0x46e8);
1520 writeb(0x01, iop + 0x102);
1521 writeb(0x08, iop + 0x46e8);
1522 writeb(EXT_BIU_MISC, iop + 0x3ce);
1523 writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
1524
Al Virocd030662005-12-15 09:18:10 +00001525 iounmap(iop);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001526#else
1527 /*
1528 * Most other machine types are "normal", so
1529 * we use the standard IO-based wakeup.
1530 */
1531 outb(0x18, 0x46e8);
1532 outb(0x01, 0x102);
1533 outb(0x08, 0x46e8);
1534 outb(EXT_BIU_MISC, 0x3ce);
1535 outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
1536#endif
1537
1538 /*
1539 * Allow the CyberPro to accept PCI burst accesses
1540 */
Woody Suwalskicd792aa2007-02-12 00:55:00 -08001541 if (cfb->id == ID_CYBERPRO_2010) {
1542 printk(KERN_INFO "%s: NOT enabling PCI bursts\n", cfb->fb.fix.id);
1543 } else {
1544 val = cyber2000_grphr(EXT_BUS_CTL, cfb);
1545 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
1546 printk(KERN_INFO "%s: enabling PCI bursts\n",
1547 cfb->fb.fix.id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001548
Woody Suwalskicd792aa2007-02-12 00:55:00 -08001549 val |= EXT_BUS_CTL_PCIBURST_WRITE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001550
Woody Suwalskicd792aa2007-02-12 00:55:00 -08001551 if (cfb->id == ID_CYBERPRO_5000)
1552 val |= EXT_BUS_CTL_PCIBURST_READ;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001553
Woody Suwalskicd792aa2007-02-12 00:55:00 -08001554 cyber2000_grphw(EXT_BUS_CTL, val, cfb);
1555 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001556 }
1557
1558 return 0;
1559}
1560
1561static int __devinit
1562cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
1563{
1564 struct cfb_info *cfb;
1565 char name[16];
1566 int err;
1567
1568 sprintf(name, "CyberPro%4X", id->device);
1569
1570 err = pci_enable_device(dev);
1571 if (err)
1572 return err;
1573
1574 err = pci_request_regions(dev, name);
1575 if (err)
1576 return err;
1577
1578 err = -ENOMEM;
1579 cfb = cyberpro_alloc_fb_info(id->driver_data, name);
1580 if (!cfb)
1581 goto failed_release;
1582
1583 cfb->dev = dev;
1584 cfb->region = ioremap(pci_resource_start(dev, 0),
1585 pci_resource_len(dev, 0));
1586 if (!cfb->region)
1587 goto failed_ioremap;
1588
1589 cfb->regs = cfb->region + MMIO_OFFSET;
1590 cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
1591 cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
1592
1593 /*
1594 * Bring up the hardware. This is expected to enable access
1595 * to the linear memory region, and allow access to the memory
1596 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
1597 * initialised.
1598 */
1599 err = cyberpro_pci_enable_mmio(cfb);
1600 if (err)
1601 goto failed;
1602
1603 /*
1604 * Use MCLK from BIOS. FIXME: what about hotplug?
1605 */
1606 cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
1607 cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb);
1608
1609#ifdef __arm__
1610 /*
1611 * MCLK on the NetWinder and the Shark is fixed at 75MHz
1612 */
1613 if (machine_is_netwinder()) {
1614 cfb->mclk_mult = 0xdb;
1615 cfb->mclk_div = 0x54;
1616 }
1617#endif
1618
1619 err = cyberpro_common_probe(cfb);
1620 if (err)
1621 goto failed;
1622
1623 /*
1624 * Our driver data
1625 */
1626 pci_set_drvdata(dev, cfb);
1627 if (int_cfb_info == NULL)
1628 int_cfb_info = cfb;
1629
1630 return 0;
1631
1632failed:
1633 iounmap(cfb->region);
1634failed_ioremap:
1635 cyberpro_free_fb_info(cfb);
1636failed_release:
1637 pci_release_regions(dev);
1638
1639 return err;
1640}
1641
1642static void __devexit cyberpro_pci_remove(struct pci_dev *dev)
1643{
1644 struct cfb_info *cfb = pci_get_drvdata(dev);
1645
1646 if (cfb) {
1647 /*
1648 * If unregister_framebuffer fails, then
1649 * we will be leaving hooks that could cause
1650 * oopsen laying around.
1651 */
1652 if (unregister_framebuffer(&cfb->fb))
1653 printk(KERN_WARNING "%s: danger Will Robinson, "
1654 "danger danger! Oopsen imminent!\n",
1655 cfb->fb.fix.id);
1656 iounmap(cfb->region);
1657 cyberpro_free_fb_info(cfb);
1658
1659 /*
1660 * Ensure that the driver data is no longer
1661 * valid.
1662 */
1663 pci_set_drvdata(dev, NULL);
1664 if (cfb == int_cfb_info)
1665 int_cfb_info = NULL;
1666
1667 pci_release_regions(dev);
1668 }
1669}
1670
1671static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state)
1672{
1673 return 0;
1674}
1675
1676/*
1677 * Re-initialise the CyberPro hardware
1678 */
1679static int cyberpro_pci_resume(struct pci_dev *dev)
1680{
1681 struct cfb_info *cfb = pci_get_drvdata(dev);
1682
1683 if (cfb) {
1684 cyberpro_pci_enable_mmio(cfb);
1685 cyberpro_common_resume(cfb);
1686 }
1687
1688 return 0;
1689}
1690
1691static struct pci_device_id cyberpro_pci_table[] = {
1692// Not yet
1693// { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
1694// PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
1695 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
1696 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
1697 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
1698 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
1699 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
1700 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
1701 { 0, }
1702};
1703
1704MODULE_DEVICE_TABLE(pci,cyberpro_pci_table);
1705
1706static struct pci_driver cyberpro_driver = {
1707 .name = "CyberPro",
1708 .probe = cyberpro_pci_probe,
1709 .remove = __devexit_p(cyberpro_pci_remove),
1710 .suspend = cyberpro_pci_suspend,
1711 .resume = cyberpro_pci_resume,
1712 .id_table = cyberpro_pci_table
1713};
1714#endif
1715
1716/*
1717 * I don't think we can use the "module_init" stuff here because
1718 * the fbcon stuff may not be initialised yet. Hence the #ifdef
1719 * around module_init.
1720 *
1721 * Tony: "module_init" is now required
1722 */
1723static int __init cyber2000fb_init(void)
1724{
1725 int ret = -1, err;
1726
1727#ifndef MODULE
1728 char *option = NULL;
1729
1730 if (fb_get_options("cyber2000fb", &option))
1731 return -ENODEV;
1732 cyber2000fb_setup(option);
1733#endif
1734
1735#ifdef CONFIG_ARCH_SHARK
1736 err = cyberpro_vl_probe();
1737 if (!err) {
1738 ret = 0;
1739 __module_get(THIS_MODULE);
1740 }
1741#endif
1742#ifdef CONFIG_PCI
1743 err = pci_register_driver(&cyberpro_driver);
1744 if (!err)
1745 ret = 0;
1746#endif
1747
1748 return ret ? err : 0;
1749}
1750
1751static void __exit cyberpro_exit(void)
1752{
1753 pci_unregister_driver(&cyberpro_driver);
1754}
1755
1756module_init(cyber2000fb_init);
1757module_exit(cyberpro_exit);
1758
1759MODULE_AUTHOR("Russell King");
1760MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
1761MODULE_LICENSE("GPL");