David Lopo | aa69a80 | 2008-11-17 14:14:51 -0800 | [diff] [blame] | 1 | /* |
| 2 | * ci13xxx_udc.c - MIPS USB IP core family device controller |
| 3 | * |
| 4 | * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. |
| 5 | * |
| 6 | * Author: David Lopo |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | */ |
| 12 | |
| 13 | /* |
| 14 | * Description: MIPS USB IP core family device controller |
| 15 | * Currently it only supports IP part number CI13412 |
| 16 | * |
| 17 | * This driver is composed of several blocks: |
| 18 | * - HW: hardware interface |
| 19 | * - DBG: debug facilities (optional) |
| 20 | * - UTIL: utilities |
| 21 | * - ISR: interrupts handling |
| 22 | * - ENDPT: endpoint operations (Gadget API) |
| 23 | * - GADGET: gadget operations (Gadget API) |
| 24 | * - BUS: bus glue code, bus abstraction layer |
| 25 | * - PCI: PCI core interface and PCI resources (interrupts, memory...) |
| 26 | * |
| 27 | * Compile Options |
| 28 | * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities |
| 29 | * - STALL_IN: non-empty bulk-in pipes cannot be halted |
| 30 | * if defined mass storage compliance succeeds but with warnings |
| 31 | * => case 4: Hi > Dn |
| 32 | * => case 5: Hi > Di |
| 33 | * => case 8: Hi <> Do |
| 34 | * if undefined usbtest 13 fails |
| 35 | * - TRACE: enable function tracing (depends on DEBUG) |
| 36 | * |
| 37 | * Main Features |
| 38 | * - Chapter 9 & Mass Storage Compliance with Gadget File Storage |
| 39 | * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined) |
| 40 | * - Normal & LPM support |
| 41 | * |
| 42 | * USBTEST Report |
| 43 | * - OK: 0-12, 13 (STALL_IN defined) & 14 |
| 44 | * - Not Supported: 15 & 16 (ISO) |
| 45 | * |
| 46 | * TODO List |
| 47 | * - OTG |
| 48 | * - Isochronous & Interrupt Traffic |
| 49 | * - Handle requests which spawns into several TDs |
| 50 | * - GET_STATUS(device) - always reports 0 |
| 51 | * - Gadget API (majority of optional features) |
| 52 | * - Suspend & Remote Wakeup |
| 53 | */ |
Matthias Kaehlcke | 36825a2 | 2009-04-15 22:28:36 +0200 | [diff] [blame] | 54 | #include <linux/delay.h> |
David Lopo | aa69a80 | 2008-11-17 14:14:51 -0800 | [diff] [blame] | 55 | #include <linux/device.h> |
| 56 | #include <linux/dmapool.h> |
| 57 | #include <linux/dma-mapping.h> |
| 58 | #include <linux/init.h> |
| 59 | #include <linux/interrupt.h> |
David Lopo | aa69a80 | 2008-11-17 14:14:51 -0800 | [diff] [blame] | 60 | #include <linux/io.h> |
| 61 | #include <linux/irq.h> |
| 62 | #include <linux/kernel.h> |
| 63 | #include <linux/module.h> |
| 64 | #include <linux/pci.h> |
| 65 | #include <linux/usb/ch9.h> |
| 66 | #include <linux/usb/gadget.h> |
| 67 | |
| 68 | #include "ci13xxx_udc.h" |
| 69 | |
| 70 | |
| 71 | /****************************************************************************** |
| 72 | * DEFINE |
| 73 | *****************************************************************************/ |
| 74 | /* ctrl register bank access */ |
| 75 | static DEFINE_SPINLOCK(udc_lock); |
| 76 | |
| 77 | /* driver name */ |
| 78 | #define UDC_DRIVER_NAME "ci13xxx_udc" |
| 79 | |
| 80 | /* control endpoint description */ |
| 81 | static const struct usb_endpoint_descriptor |
| 82 | ctrl_endpt_desc = { |
| 83 | .bLength = USB_DT_ENDPOINT_SIZE, |
| 84 | .bDescriptorType = USB_DT_ENDPOINT, |
| 85 | |
| 86 | .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| 87 | .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), |
| 88 | }; |
| 89 | |
| 90 | /* UDC descriptor */ |
| 91 | static struct ci13xxx *_udc; |
| 92 | |
| 93 | /* Interrupt statistics */ |
| 94 | #define ISR_MASK 0x1F |
| 95 | static struct { |
| 96 | u32 test; |
| 97 | u32 ui; |
| 98 | u32 uei; |
| 99 | u32 pci; |
| 100 | u32 uri; |
| 101 | u32 sli; |
| 102 | u32 none; |
| 103 | struct { |
| 104 | u32 cnt; |
| 105 | u32 buf[ISR_MASK+1]; |
| 106 | u32 idx; |
| 107 | } hndl; |
| 108 | } isr_statistics; |
| 109 | |
| 110 | /** |
| 111 | * ffs_nr: find first (least significant) bit set |
| 112 | * @x: the word to search |
| 113 | * |
| 114 | * This function returns bit number (instead of position) |
| 115 | */ |
| 116 | static int ffs_nr(u32 x) |
| 117 | { |
| 118 | int n = ffs(x); |
| 119 | |
| 120 | return n ? n-1 : 32; |
| 121 | } |
| 122 | |
| 123 | /****************************************************************************** |
| 124 | * HW block |
| 125 | *****************************************************************************/ |
| 126 | /* register bank descriptor */ |
| 127 | static struct { |
| 128 | unsigned lpm; /* is LPM? */ |
| 129 | void __iomem *abs; /* bus map offset */ |
| 130 | void __iomem *cap; /* bus map offset + CAP offset + CAP data */ |
| 131 | size_t size; /* bank size */ |
| 132 | } hw_bank; |
| 133 | |
| 134 | /* UDC register map */ |
| 135 | #define ABS_CAPLENGTH (0x100UL) |
| 136 | #define ABS_HCCPARAMS (0x108UL) |
| 137 | #define ABS_DCCPARAMS (0x124UL) |
| 138 | #define ABS_TESTMODE (hw_bank.lpm ? 0x0FCUL : 0x138UL) |
| 139 | /* offset to CAPLENTGH (addr + data) */ |
| 140 | #define CAP_USBCMD (0x000UL) |
| 141 | #define CAP_USBSTS (0x004UL) |
| 142 | #define CAP_USBINTR (0x008UL) |
| 143 | #define CAP_DEVICEADDR (0x014UL) |
| 144 | #define CAP_ENDPTLISTADDR (0x018UL) |
| 145 | #define CAP_PORTSC (0x044UL) |
David Lopo | f23e649 | 2009-04-16 14:35:24 -0700 | [diff] [blame] | 146 | #define CAP_DEVLC (0x084UL) |
David Lopo | aa69a80 | 2008-11-17 14:14:51 -0800 | [diff] [blame] | 147 | #define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) |
| 148 | #define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) |
| 149 | #define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) |
| 150 | #define CAP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL) |
| 151 | #define CAP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL) |
| 152 | #define CAP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL) |
| 153 | #define CAP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL) |
| 154 | #define CAP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL) |
| 155 | |
| 156 | /* maximum number of enpoints: valid only after hw_device_reset() */ |
| 157 | static unsigned hw_ep_max; |
| 158 | |
| 159 | /** |
| 160 | * hw_ep_bit: calculates the bit number |
| 161 | * @num: endpoint number |
| 162 | * @dir: endpoint direction |
| 163 | * |
| 164 | * This function returns bit number |
| 165 | */ |
| 166 | static inline int hw_ep_bit(int num, int dir) |
| 167 | { |
| 168 | return num + (dir ? 16 : 0); |
| 169 | } |
| 170 | |
| 171 | /** |
| 172 | * hw_aread: reads from register bitfield |
| 173 | * @addr: address relative to bus map |
| 174 | * @mask: bitfield mask |
| 175 | * |
| 176 | * This function returns register bitfield data |
| 177 | */ |
| 178 | static u32 hw_aread(u32 addr, u32 mask) |
| 179 | { |
| 180 | return ioread32(addr + hw_bank.abs) & mask; |
| 181 | } |
| 182 | |
| 183 | /** |
| 184 | * hw_awrite: writes to register bitfield |
| 185 | * @addr: address relative to bus map |
| 186 | * @mask: bitfield mask |
| 187 | * @data: new data |
| 188 | */ |
| 189 | static void hw_awrite(u32 addr, u32 mask, u32 data) |
| 190 | { |
| 191 | iowrite32(hw_aread(addr, ~mask) | (data & mask), |
| 192 | addr + hw_bank.abs); |
| 193 | } |
| 194 | |
| 195 | /** |
| 196 | * hw_cread: reads from register bitfield |
| 197 | * @addr: address relative to CAP offset plus content |
| 198 | * @mask: bitfield mask |
| 199 | * |
| 200 | * This function returns register bitfield data |
| 201 | */ |
| 202 | static u32 hw_cread(u32 addr, u32 mask) |
| 203 | { |
| 204 | return ioread32(addr + hw_bank.cap) & mask; |
| 205 | } |
| 206 | |
| 207 | /** |
| 208 | * hw_cwrite: writes to register bitfield |
| 209 | * @addr: address relative to CAP offset plus content |
| 210 | * @mask: bitfield mask |
| 211 | * @data: new data |
| 212 | */ |
| 213 | static void hw_cwrite(u32 addr, u32 mask, u32 data) |
| 214 | { |
| 215 | iowrite32(hw_cread(addr, ~mask) | (data & mask), |
| 216 | addr + hw_bank.cap); |
| 217 | } |
| 218 | |
| 219 | /** |
| 220 | * hw_ctest_and_clear: tests & clears register bitfield |
| 221 | * @addr: address relative to CAP offset plus content |
| 222 | * @mask: bitfield mask |
| 223 | * |
| 224 | * This function returns register bitfield data |
| 225 | */ |
| 226 | static u32 hw_ctest_and_clear(u32 addr, u32 mask) |
| 227 | { |
| 228 | u32 reg = hw_cread(addr, mask); |
| 229 | |
| 230 | iowrite32(reg, addr + hw_bank.cap); |
| 231 | return reg; |
| 232 | } |
| 233 | |
| 234 | /** |
| 235 | * hw_ctest_and_write: tests & writes register bitfield |
| 236 | * @addr: address relative to CAP offset plus content |
| 237 | * @mask: bitfield mask |
| 238 | * @data: new data |
| 239 | * |
| 240 | * This function returns register bitfield data |
| 241 | */ |
| 242 | static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data) |
| 243 | { |
| 244 | u32 reg = hw_cread(addr, ~0); |
| 245 | |
| 246 | iowrite32((reg & ~mask) | (data & mask), addr + hw_bank.cap); |
| 247 | return (reg & mask) >> ffs_nr(mask); |
| 248 | } |
| 249 | |
| 250 | /** |
| 251 | * hw_device_reset: resets chip (execute without interruption) |
| 252 | * @base: register base address |
| 253 | * |
| 254 | * This function returns an error code |
| 255 | */ |
| 256 | static int hw_device_reset(void __iomem *base) |
| 257 | { |
| 258 | u32 reg; |
| 259 | |
| 260 | /* bank is a module variable */ |
| 261 | hw_bank.abs = base; |
| 262 | |
| 263 | hw_bank.cap = hw_bank.abs; |
| 264 | hw_bank.cap += ABS_CAPLENGTH; |
| 265 | hw_bank.cap += ioread8(hw_bank.cap); |
| 266 | |
| 267 | reg = hw_aread(ABS_HCCPARAMS, HCCPARAMS_LEN) >> ffs_nr(HCCPARAMS_LEN); |
| 268 | hw_bank.lpm = reg; |
| 269 | hw_bank.size = hw_bank.cap - hw_bank.abs; |
| 270 | hw_bank.size += CAP_LAST; |
| 271 | hw_bank.size /= sizeof(u32); |
| 272 | |
| 273 | /* should flush & stop before reset */ |
| 274 | hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); |
| 275 | hw_cwrite(CAP_USBCMD, USBCMD_RS, 0); |
| 276 | |
| 277 | hw_cwrite(CAP_USBCMD, USBCMD_RST, USBCMD_RST); |
| 278 | while (hw_cread(CAP_USBCMD, USBCMD_RST)) |
| 279 | udelay(10); /* not RTOS friendly */ |
| 280 | |
| 281 | /* USBMODE should be configured step by step */ |
| 282 | hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); |
| 283 | hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); |
| 284 | hw_cwrite(CAP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); /* HW >= 2.3 */ |
| 285 | |
| 286 | if (hw_cread(CAP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) { |
| 287 | pr_err("cannot enter in device mode"); |
| 288 | pr_err("lpm = %i", hw_bank.lpm); |
| 289 | return -ENODEV; |
| 290 | } |
| 291 | |
| 292 | reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); |
| 293 | if (reg == 0 || reg > ENDPT_MAX) |
| 294 | return -ENODEV; |
| 295 | |
| 296 | hw_ep_max = reg; /* cache hw ENDPT_MAX */ |
| 297 | |
| 298 | /* setup lock mode ? */ |
| 299 | |
| 300 | /* ENDPTSETUPSTAT is '0' by default */ |
| 301 | |
| 302 | /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ |
| 303 | |
| 304 | return 0; |
| 305 | } |
| 306 | |
| 307 | /** |
| 308 | * hw_device_state: enables/disables interrupts & starts/stops device (execute |
| 309 | * without interruption) |
| 310 | * @dma: 0 => disable, !0 => enable and set dma engine |
| 311 | * |
| 312 | * This function returns an error code |
| 313 | */ |
| 314 | static int hw_device_state(u32 dma) |
| 315 | { |
| 316 | if (dma) { |
| 317 | hw_cwrite(CAP_ENDPTLISTADDR, ~0, dma); |
| 318 | /* interrupt, error, port change, reset, sleep/suspend */ |
| 319 | hw_cwrite(CAP_USBINTR, ~0, |
| 320 | USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); |
| 321 | hw_cwrite(CAP_USBCMD, USBCMD_RS, USBCMD_RS); |
| 322 | } else { |
| 323 | hw_cwrite(CAP_USBCMD, USBCMD_RS, 0); |
| 324 | hw_cwrite(CAP_USBINTR, ~0, 0); |
| 325 | } |
| 326 | return 0; |
| 327 | } |
| 328 | |
| 329 | /** |
| 330 | * hw_ep_flush: flush endpoint fifo (execute without interruption) |
| 331 | * @num: endpoint number |
| 332 | * @dir: endpoint direction |
| 333 | * |
| 334 | * This function returns an error code |
| 335 | */ |
| 336 | static int hw_ep_flush(int num, int dir) |
| 337 | { |
| 338 | int n = hw_ep_bit(num, dir); |
| 339 | |
| 340 | do { |
| 341 | /* flush any pending transfer */ |
| 342 | hw_cwrite(CAP_ENDPTFLUSH, BIT(n), BIT(n)); |
| 343 | while (hw_cread(CAP_ENDPTFLUSH, BIT(n))) |
| 344 | cpu_relax(); |
| 345 | } while (hw_cread(CAP_ENDPTSTAT, BIT(n))); |
| 346 | |
| 347 | return 0; |
| 348 | } |
| 349 | |
| 350 | /** |
| 351 | * hw_ep_disable: disables endpoint (execute without interruption) |
| 352 | * @num: endpoint number |
| 353 | * @dir: endpoint direction |
| 354 | * |
| 355 | * This function returns an error code |
| 356 | */ |
| 357 | static int hw_ep_disable(int num, int dir) |
| 358 | { |
| 359 | hw_ep_flush(num, dir); |
| 360 | hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), |
| 361 | dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); |
| 362 | return 0; |
| 363 | } |
| 364 | |
| 365 | /** |
| 366 | * hw_ep_enable: enables endpoint (execute without interruption) |
| 367 | * @num: endpoint number |
| 368 | * @dir: endpoint direction |
| 369 | * @type: endpoint type |
| 370 | * |
| 371 | * This function returns an error code |
| 372 | */ |
| 373 | static int hw_ep_enable(int num, int dir, int type) |
| 374 | { |
| 375 | u32 mask, data; |
| 376 | |
| 377 | if (dir) { |
| 378 | mask = ENDPTCTRL_TXT; /* type */ |
| 379 | data = type << ffs_nr(mask); |
| 380 | |
| 381 | mask |= ENDPTCTRL_TXS; /* unstall */ |
| 382 | mask |= ENDPTCTRL_TXR; /* reset data toggle */ |
| 383 | data |= ENDPTCTRL_TXR; |
| 384 | mask |= ENDPTCTRL_TXE; /* enable */ |
| 385 | data |= ENDPTCTRL_TXE; |
| 386 | } else { |
| 387 | mask = ENDPTCTRL_RXT; /* type */ |
| 388 | data = type << ffs_nr(mask); |
| 389 | |
| 390 | mask |= ENDPTCTRL_RXS; /* unstall */ |
| 391 | mask |= ENDPTCTRL_RXR; /* reset data toggle */ |
| 392 | data |= ENDPTCTRL_RXR; |
| 393 | mask |= ENDPTCTRL_RXE; /* enable */ |
| 394 | data |= ENDPTCTRL_RXE; |
| 395 | } |
| 396 | hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), mask, data); |
| 397 | return 0; |
| 398 | } |
| 399 | |
| 400 | /** |
| 401 | * hw_ep_get_halt: return endpoint halt status |
| 402 | * @num: endpoint number |
| 403 | * @dir: endpoint direction |
| 404 | * |
| 405 | * This function returns 1 if endpoint halted |
| 406 | */ |
| 407 | static int hw_ep_get_halt(int num, int dir) |
| 408 | { |
| 409 | u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; |
| 410 | |
| 411 | return hw_cread(CAP_ENDPTCTRL + num * sizeof(u32), mask) ? 1 : 0; |
| 412 | } |
| 413 | |
| 414 | /** |
| 415 | * hw_ep_is_primed: test if endpoint is primed (execute without interruption) |
| 416 | * @num: endpoint number |
| 417 | * @dir: endpoint direction |
| 418 | * |
| 419 | * This function returns true if endpoint primed |
| 420 | */ |
| 421 | static int hw_ep_is_primed(int num, int dir) |
| 422 | { |
| 423 | u32 reg = hw_cread(CAP_ENDPTPRIME, ~0) | hw_cread(CAP_ENDPTSTAT, ~0); |
| 424 | |
| 425 | return test_bit(hw_ep_bit(num, dir), (void *)®); |
| 426 | } |
| 427 | |
| 428 | /** |
| 429 | * hw_test_and_clear_setup_status: test & clear setup status (execute without |
| 430 | * interruption) |
| 431 | * @n: bit number (endpoint) |
| 432 | * |
| 433 | * This function returns setup status |
| 434 | */ |
| 435 | static int hw_test_and_clear_setup_status(int n) |
| 436 | { |
| 437 | return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT, BIT(n)); |
| 438 | } |
| 439 | |
| 440 | /** |
| 441 | * hw_ep_prime: primes endpoint (execute without interruption) |
| 442 | * @num: endpoint number |
| 443 | * @dir: endpoint direction |
| 444 | * @is_ctrl: true if control endpoint |
| 445 | * |
| 446 | * This function returns an error code |
| 447 | */ |
| 448 | static int hw_ep_prime(int num, int dir, int is_ctrl) |
| 449 | { |
| 450 | int n = hw_ep_bit(num, dir); |
| 451 | |
| 452 | /* the caller should flush first */ |
| 453 | if (hw_ep_is_primed(num, dir)) |
| 454 | return -EBUSY; |
| 455 | |
| 456 | if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) |
| 457 | return -EAGAIN; |
| 458 | |
| 459 | hw_cwrite(CAP_ENDPTPRIME, BIT(n), BIT(n)); |
| 460 | |
| 461 | while (hw_cread(CAP_ENDPTPRIME, BIT(n))) |
| 462 | cpu_relax(); |
| 463 | if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) |
| 464 | return -EAGAIN; |
| 465 | |
| 466 | /* status shoult be tested according with manual but it doesn't work */ |
| 467 | return 0; |
| 468 | } |
| 469 | |
| 470 | /** |
| 471 | * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute |
| 472 | * without interruption) |
| 473 | * @num: endpoint number |
| 474 | * @dir: endpoint direction |
| 475 | * @value: true => stall, false => unstall |
| 476 | * |
| 477 | * This function returns an error code |
| 478 | */ |
| 479 | static int hw_ep_set_halt(int num, int dir, int value) |
| 480 | { |
| 481 | if (value != 0 && value != 1) |
| 482 | return -EINVAL; |
| 483 | |
| 484 | do { |
| 485 | u32 addr = CAP_ENDPTCTRL + num * sizeof(u32); |
| 486 | u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; |
| 487 | u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; |
| 488 | |
| 489 | /* data toggle - reserved for EP0 but it's in ESS */ |
| 490 | hw_cwrite(addr, mask_xs|mask_xr, value ? mask_xs : mask_xr); |
| 491 | |
| 492 | } while (value != hw_ep_get_halt(num, dir)); |
| 493 | |
| 494 | return 0; |
| 495 | } |
| 496 | |
| 497 | /** |
| 498 | * hw_intr_clear: disables interrupt & clears interrupt status (execute without |
| 499 | * interruption) |
| 500 | * @n: interrupt bit |
| 501 | * |
| 502 | * This function returns an error code |
| 503 | */ |
| 504 | static int hw_intr_clear(int n) |
| 505 | { |
| 506 | if (n >= REG_BITS) |
| 507 | return -EINVAL; |
| 508 | |
| 509 | hw_cwrite(CAP_USBINTR, BIT(n), 0); |
| 510 | hw_cwrite(CAP_USBSTS, BIT(n), BIT(n)); |
| 511 | return 0; |
| 512 | } |
| 513 | |
| 514 | /** |
| 515 | * hw_intr_force: enables interrupt & forces interrupt status (execute without |
| 516 | * interruption) |
| 517 | * @n: interrupt bit |
| 518 | * |
| 519 | * This function returns an error code |
| 520 | */ |
| 521 | static int hw_intr_force(int n) |
| 522 | { |
| 523 | if (n >= REG_BITS) |
| 524 | return -EINVAL; |
| 525 | |
| 526 | hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); |
| 527 | hw_cwrite(CAP_USBINTR, BIT(n), BIT(n)); |
| 528 | hw_cwrite(CAP_USBSTS, BIT(n), BIT(n)); |
| 529 | hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, 0); |
| 530 | return 0; |
| 531 | } |
| 532 | |
| 533 | /** |
| 534 | * hw_is_port_high_speed: test if port is high speed |
| 535 | * |
| 536 | * This function returns true if high speed port |
| 537 | */ |
| 538 | static int hw_port_is_high_speed(void) |
| 539 | { |
| 540 | return hw_bank.lpm ? hw_cread(CAP_DEVLC, DEVLC_PSPD) : |
| 541 | hw_cread(CAP_PORTSC, PORTSC_HSP); |
| 542 | } |
| 543 | |
| 544 | /** |
| 545 | * hw_port_test_get: reads port test mode value |
| 546 | * |
| 547 | * This function returns port test mode value |
| 548 | */ |
| 549 | static u8 hw_port_test_get(void) |
| 550 | { |
| 551 | return hw_cread(CAP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC); |
| 552 | } |
| 553 | |
| 554 | /** |
| 555 | * hw_port_test_set: writes port test mode (execute without interruption) |
| 556 | * @mode: new value |
| 557 | * |
| 558 | * This function returns an error code |
| 559 | */ |
| 560 | static int hw_port_test_set(u8 mode) |
| 561 | { |
| 562 | const u8 TEST_MODE_MAX = 7; |
| 563 | |
| 564 | if (mode > TEST_MODE_MAX) |
| 565 | return -EINVAL; |
| 566 | |
| 567 | hw_cwrite(CAP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC)); |
| 568 | return 0; |
| 569 | } |
| 570 | |
| 571 | /** |
| 572 | * hw_read_intr_enable: returns interrupt enable register |
| 573 | * |
| 574 | * This function returns register data |
| 575 | */ |
| 576 | static u32 hw_read_intr_enable(void) |
| 577 | { |
| 578 | return hw_cread(CAP_USBINTR, ~0); |
| 579 | } |
| 580 | |
| 581 | /** |
| 582 | * hw_read_intr_status: returns interrupt status register |
| 583 | * |
| 584 | * This function returns register data |
| 585 | */ |
| 586 | static u32 hw_read_intr_status(void) |
| 587 | { |
| 588 | return hw_cread(CAP_USBSTS, ~0); |
| 589 | } |
| 590 | |
| 591 | /** |
| 592 | * hw_register_read: reads all device registers (execute without interruption) |
| 593 | * @buf: destination buffer |
| 594 | * @size: buffer size |
| 595 | * |
| 596 | * This function returns number of registers read |
| 597 | */ |
| 598 | static size_t hw_register_read(u32 *buf, size_t size) |
| 599 | { |
| 600 | unsigned i; |
| 601 | |
| 602 | if (size > hw_bank.size) |
| 603 | size = hw_bank.size; |
| 604 | |
| 605 | for (i = 0; i < size; i++) |
| 606 | buf[i] = hw_aread(i * sizeof(u32), ~0); |
| 607 | |
| 608 | return size; |
| 609 | } |
| 610 | |
| 611 | /** |
| 612 | * hw_register_write: writes to register |
| 613 | * @addr: register address |
| 614 | * @data: register value |
| 615 | * |
| 616 | * This function returns an error code |
| 617 | */ |
| 618 | static int hw_register_write(u16 addr, u32 data) |
| 619 | { |
| 620 | /* align */ |
| 621 | addr /= sizeof(u32); |
| 622 | |
| 623 | if (addr >= hw_bank.size) |
| 624 | return -EINVAL; |
| 625 | |
| 626 | /* align */ |
| 627 | addr *= sizeof(u32); |
| 628 | |
| 629 | hw_awrite(addr, ~0, data); |
| 630 | return 0; |
| 631 | } |
| 632 | |
| 633 | /** |
| 634 | * hw_test_and_clear_complete: test & clear complete status (execute without |
| 635 | * interruption) |
| 636 | * @n: bit number (endpoint) |
| 637 | * |
| 638 | * This function returns complete status |
| 639 | */ |
| 640 | static int hw_test_and_clear_complete(int n) |
| 641 | { |
| 642 | return hw_ctest_and_clear(CAP_ENDPTCOMPLETE, BIT(n)); |
| 643 | } |
| 644 | |
| 645 | /** |
| 646 | * hw_test_and_clear_intr_active: test & clear active interrupts (execute |
| 647 | * without interruption) |
| 648 | * |
| 649 | * This function returns active interrutps |
| 650 | */ |
| 651 | static u32 hw_test_and_clear_intr_active(void) |
| 652 | { |
| 653 | u32 reg = hw_read_intr_status() & hw_read_intr_enable(); |
| 654 | |
| 655 | hw_cwrite(CAP_USBSTS, ~0, reg); |
| 656 | return reg; |
| 657 | } |
| 658 | |
| 659 | /** |
| 660 | * hw_test_and_clear_setup_guard: test & clear setup guard (execute without |
| 661 | * interruption) |
| 662 | * |
| 663 | * This function returns guard value |
| 664 | */ |
| 665 | static int hw_test_and_clear_setup_guard(void) |
| 666 | { |
| 667 | return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, 0); |
| 668 | } |
| 669 | |
| 670 | /** |
| 671 | * hw_test_and_set_setup_guard: test & set setup guard (execute without |
| 672 | * interruption) |
| 673 | * |
| 674 | * This function returns guard value |
| 675 | */ |
| 676 | static int hw_test_and_set_setup_guard(void) |
| 677 | { |
| 678 | return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); |
| 679 | } |
| 680 | |
| 681 | /** |
| 682 | * hw_usb_set_address: configures USB address (execute without interruption) |
| 683 | * @value: new USB address |
| 684 | * |
| 685 | * This function returns an error code |
| 686 | */ |
| 687 | static int hw_usb_set_address(u8 value) |
| 688 | { |
| 689 | /* advance */ |
| 690 | hw_cwrite(CAP_DEVICEADDR, DEVICEADDR_USBADR | DEVICEADDR_USBADRA, |
| 691 | value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA); |
| 692 | return 0; |
| 693 | } |
| 694 | |
| 695 | /** |
| 696 | * hw_usb_reset: restart device after a bus reset (execute without |
| 697 | * interruption) |
| 698 | * |
| 699 | * This function returns an error code |
| 700 | */ |
| 701 | static int hw_usb_reset(void) |
| 702 | { |
| 703 | hw_usb_set_address(0); |
| 704 | |
| 705 | /* ESS flushes only at end?!? */ |
| 706 | hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); /* flush all EPs */ |
| 707 | |
| 708 | /* clear setup token semaphores */ |
| 709 | hw_cwrite(CAP_ENDPTSETUPSTAT, 0, 0); /* writes its content */ |
| 710 | |
| 711 | /* clear complete status */ |
| 712 | hw_cwrite(CAP_ENDPTCOMPLETE, 0, 0); /* writes its content */ |
| 713 | |
| 714 | /* wait until all bits cleared */ |
| 715 | while (hw_cread(CAP_ENDPTPRIME, ~0)) |
| 716 | udelay(10); /* not RTOS friendly */ |
| 717 | |
| 718 | /* reset all endpoints ? */ |
| 719 | |
| 720 | /* reset internal status and wait for further instructions |
| 721 | no need to verify the port reset status (ESS does it) */ |
| 722 | |
| 723 | return 0; |
| 724 | } |
| 725 | |
| 726 | /****************************************************************************** |
| 727 | * DBG block |
| 728 | *****************************************************************************/ |
| 729 | /** |
| 730 | * show_device: prints information about device capabilities and status |
| 731 | * |
| 732 | * Check "device.h" for details |
| 733 | */ |
| 734 | static ssize_t show_device(struct device *dev, struct device_attribute *attr, |
| 735 | char *buf) |
| 736 | { |
| 737 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 738 | struct usb_gadget *gadget = &udc->gadget; |
| 739 | int n = 0; |
| 740 | |
| 741 | dbg_trace("[%s] %p\n", __func__, buf); |
| 742 | if (attr == NULL || buf == NULL) { |
| 743 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 744 | return 0; |
| 745 | } |
| 746 | |
| 747 | n += scnprintf(buf + n, PAGE_SIZE - n, "speed = %d\n", |
| 748 | gadget->speed); |
| 749 | n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed = %d\n", |
| 750 | gadget->is_dualspeed); |
| 751 | n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg = %d\n", |
| 752 | gadget->is_otg); |
| 753 | n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral = %d\n", |
| 754 | gadget->is_a_peripheral); |
| 755 | n += scnprintf(buf + n, PAGE_SIZE - n, "b_hnp_enable = %d\n", |
| 756 | gadget->b_hnp_enable); |
| 757 | n += scnprintf(buf + n, PAGE_SIZE - n, "a_hnp_support = %d\n", |
| 758 | gadget->a_hnp_support); |
| 759 | n += scnprintf(buf + n, PAGE_SIZE - n, "a_alt_hnp_support = %d\n", |
| 760 | gadget->a_alt_hnp_support); |
| 761 | n += scnprintf(buf + n, PAGE_SIZE - n, "name = %s\n", |
| 762 | (gadget->name ? gadget->name : "")); |
| 763 | |
| 764 | return n; |
| 765 | } |
| 766 | static DEVICE_ATTR(device, S_IRUSR, show_device, NULL); |
| 767 | |
| 768 | /** |
| 769 | * show_driver: prints information about attached gadget (if any) |
| 770 | * |
| 771 | * Check "device.h" for details |
| 772 | */ |
| 773 | static ssize_t show_driver(struct device *dev, struct device_attribute *attr, |
| 774 | char *buf) |
| 775 | { |
| 776 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 777 | struct usb_gadget_driver *driver = udc->driver; |
| 778 | int n = 0; |
| 779 | |
| 780 | dbg_trace("[%s] %p\n", __func__, buf); |
| 781 | if (attr == NULL || buf == NULL) { |
| 782 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 783 | return 0; |
| 784 | } |
| 785 | |
| 786 | if (driver == NULL) |
| 787 | return scnprintf(buf, PAGE_SIZE, |
| 788 | "There is no gadget attached!\n"); |
| 789 | |
| 790 | n += scnprintf(buf + n, PAGE_SIZE - n, "function = %s\n", |
| 791 | (driver->function ? driver->function : "")); |
| 792 | n += scnprintf(buf + n, PAGE_SIZE - n, "max speed = %d\n", |
| 793 | driver->speed); |
| 794 | |
| 795 | return n; |
| 796 | } |
| 797 | static DEVICE_ATTR(driver, S_IRUSR, show_driver, NULL); |
| 798 | |
| 799 | /* Maximum event message length */ |
| 800 | #define DBG_DATA_MSG 64UL |
| 801 | |
| 802 | /* Maximum event messages */ |
| 803 | #define DBG_DATA_MAX 128UL |
| 804 | |
| 805 | /* Event buffer descriptor */ |
| 806 | static struct { |
| 807 | char (buf[DBG_DATA_MAX])[DBG_DATA_MSG]; /* buffer */ |
| 808 | unsigned idx; /* index */ |
| 809 | unsigned tty; /* print to console? */ |
| 810 | rwlock_t lck; /* lock */ |
| 811 | } dbg_data = { |
| 812 | .idx = 0, |
| 813 | .tty = 0, |
| 814 | .lck = __RW_LOCK_UNLOCKED(lck) |
| 815 | }; |
| 816 | |
| 817 | /** |
| 818 | * dbg_dec: decrements debug event index |
| 819 | * @idx: buffer index |
| 820 | */ |
| 821 | static void dbg_dec(unsigned *idx) |
| 822 | { |
| 823 | *idx = (*idx - 1) & (DBG_DATA_MAX-1); |
| 824 | } |
| 825 | |
| 826 | /** |
| 827 | * dbg_inc: increments debug event index |
| 828 | * @idx: buffer index |
| 829 | */ |
| 830 | static void dbg_inc(unsigned *idx) |
| 831 | { |
| 832 | *idx = (*idx + 1) & (DBG_DATA_MAX-1); |
| 833 | } |
| 834 | |
| 835 | /** |
| 836 | * dbg_print: prints the common part of the event |
| 837 | * @addr: endpoint address |
| 838 | * @name: event name |
| 839 | * @status: status |
| 840 | * @extra: extra information |
| 841 | */ |
| 842 | static void dbg_print(u8 addr, const char *name, int status, const char *extra) |
| 843 | { |
| 844 | struct timeval tval; |
| 845 | unsigned int stamp; |
| 846 | unsigned long flags; |
| 847 | |
| 848 | write_lock_irqsave(&dbg_data.lck, flags); |
| 849 | |
| 850 | do_gettimeofday(&tval); |
| 851 | stamp = tval.tv_sec & 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s */ |
| 852 | stamp = stamp * 1000000 + tval.tv_usec; |
| 853 | |
| 854 | scnprintf(dbg_data.buf[dbg_data.idx], DBG_DATA_MSG, |
| 855 | "%04X\t» %02X %-7.7s %4i «\t%s\n", |
| 856 | stamp, addr, name, status, extra); |
| 857 | |
| 858 | dbg_inc(&dbg_data.idx); |
| 859 | |
| 860 | write_unlock_irqrestore(&dbg_data.lck, flags); |
| 861 | |
| 862 | if (dbg_data.tty != 0) |
| 863 | pr_notice("%04X\t» %02X %-7.7s %4i «\t%s\n", |
| 864 | stamp, addr, name, status, extra); |
| 865 | } |
| 866 | |
| 867 | /** |
| 868 | * dbg_done: prints a DONE event |
| 869 | * @addr: endpoint address |
| 870 | * @td: transfer descriptor |
| 871 | * @status: status |
| 872 | */ |
| 873 | static void dbg_done(u8 addr, const u32 token, int status) |
| 874 | { |
| 875 | char msg[DBG_DATA_MSG]; |
| 876 | |
| 877 | scnprintf(msg, sizeof(msg), "%d %02X", |
| 878 | (int)(token & TD_TOTAL_BYTES) >> ffs_nr(TD_TOTAL_BYTES), |
| 879 | (int)(token & TD_STATUS) >> ffs_nr(TD_STATUS)); |
| 880 | dbg_print(addr, "DONE", status, msg); |
| 881 | } |
| 882 | |
| 883 | /** |
| 884 | * dbg_event: prints a generic event |
| 885 | * @addr: endpoint address |
| 886 | * @name: event name |
| 887 | * @status: status |
| 888 | */ |
| 889 | static void dbg_event(u8 addr, const char *name, int status) |
| 890 | { |
| 891 | if (name != NULL) |
| 892 | dbg_print(addr, name, status, ""); |
| 893 | } |
| 894 | |
| 895 | /* |
| 896 | * dbg_queue: prints a QUEUE event |
| 897 | * @addr: endpoint address |
| 898 | * @req: USB request |
| 899 | * @status: status |
| 900 | */ |
| 901 | static void dbg_queue(u8 addr, const struct usb_request *req, int status) |
| 902 | { |
| 903 | char msg[DBG_DATA_MSG]; |
| 904 | |
| 905 | if (req != NULL) { |
| 906 | scnprintf(msg, sizeof(msg), |
| 907 | "%d %d", !req->no_interrupt, req->length); |
| 908 | dbg_print(addr, "QUEUE", status, msg); |
| 909 | } |
| 910 | } |
| 911 | |
| 912 | /** |
| 913 | * dbg_setup: prints a SETUP event |
| 914 | * @addr: endpoint address |
| 915 | * @req: setup request |
| 916 | */ |
| 917 | static void dbg_setup(u8 addr, const struct usb_ctrlrequest *req) |
| 918 | { |
| 919 | char msg[DBG_DATA_MSG]; |
| 920 | |
| 921 | if (req != NULL) { |
| 922 | scnprintf(msg, sizeof(msg), |
| 923 | "%02X %02X %04X %04X %d", req->bRequestType, |
| 924 | req->bRequest, le16_to_cpu(req->wValue), |
| 925 | le16_to_cpu(req->wIndex), le16_to_cpu(req->wLength)); |
| 926 | dbg_print(addr, "SETUP", 0, msg); |
| 927 | } |
| 928 | } |
| 929 | |
| 930 | /** |
| 931 | * show_events: displays the event buffer |
| 932 | * |
| 933 | * Check "device.h" for details |
| 934 | */ |
| 935 | static ssize_t show_events(struct device *dev, struct device_attribute *attr, |
| 936 | char *buf) |
| 937 | { |
| 938 | unsigned long flags; |
| 939 | unsigned i, j, n = 0; |
| 940 | |
| 941 | dbg_trace("[%s] %p\n", __func__, buf); |
| 942 | if (attr == NULL || buf == NULL) { |
| 943 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 944 | return 0; |
| 945 | } |
| 946 | |
| 947 | read_lock_irqsave(&dbg_data.lck, flags); |
| 948 | |
| 949 | i = dbg_data.idx; |
| 950 | for (dbg_dec(&i); i != dbg_data.idx; dbg_dec(&i)) { |
| 951 | n += strlen(dbg_data.buf[i]); |
| 952 | if (n >= PAGE_SIZE) { |
| 953 | n -= strlen(dbg_data.buf[i]); |
| 954 | break; |
| 955 | } |
| 956 | } |
| 957 | for (j = 0, dbg_inc(&i); j < n; dbg_inc(&i)) |
| 958 | j += scnprintf(buf + j, PAGE_SIZE - j, |
| 959 | "%s", dbg_data.buf[i]); |
| 960 | |
| 961 | read_unlock_irqrestore(&dbg_data.lck, flags); |
| 962 | |
| 963 | return n; |
| 964 | } |
| 965 | |
| 966 | /** |
| 967 | * store_events: configure if events are going to be also printed to console |
| 968 | * |
| 969 | * Check "device.h" for details |
| 970 | */ |
| 971 | static ssize_t store_events(struct device *dev, struct device_attribute *attr, |
| 972 | const char *buf, size_t count) |
| 973 | { |
| 974 | unsigned tty; |
| 975 | |
| 976 | dbg_trace("[%s] %p, %d\n", __func__, buf, count); |
| 977 | if (attr == NULL || buf == NULL) { |
| 978 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 979 | goto done; |
| 980 | } |
| 981 | |
| 982 | if (sscanf(buf, "%u", &tty) != 1 || tty > 1) { |
| 983 | dev_err(dev, "<1|0>: enable|disable console log\n"); |
| 984 | goto done; |
| 985 | } |
| 986 | |
| 987 | dbg_data.tty = tty; |
| 988 | dev_info(dev, "tty = %u", dbg_data.tty); |
| 989 | |
| 990 | done: |
| 991 | return count; |
| 992 | } |
| 993 | static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events); |
| 994 | |
| 995 | /** |
| 996 | * show_inters: interrupt status, enable status and historic |
| 997 | * |
| 998 | * Check "device.h" for details |
| 999 | */ |
| 1000 | static ssize_t show_inters(struct device *dev, struct device_attribute *attr, |
| 1001 | char *buf) |
| 1002 | { |
| 1003 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 1004 | unsigned long flags; |
| 1005 | u32 intr; |
| 1006 | unsigned i, j, n = 0; |
| 1007 | |
| 1008 | dbg_trace("[%s] %p\n", __func__, buf); |
| 1009 | if (attr == NULL || buf == NULL) { |
| 1010 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 1011 | return 0; |
| 1012 | } |
| 1013 | |
| 1014 | spin_lock_irqsave(udc->lock, flags); |
| 1015 | |
| 1016 | n += scnprintf(buf + n, PAGE_SIZE - n, |
| 1017 | "status = %08x\n", hw_read_intr_status()); |
| 1018 | n += scnprintf(buf + n, PAGE_SIZE - n, |
| 1019 | "enable = %08x\n", hw_read_intr_enable()); |
| 1020 | |
| 1021 | n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n", |
| 1022 | isr_statistics.test); |
| 1023 | n += scnprintf(buf + n, PAGE_SIZE - n, "» ui = %d\n", |
| 1024 | isr_statistics.ui); |
| 1025 | n += scnprintf(buf + n, PAGE_SIZE - n, "» uei = %d\n", |
| 1026 | isr_statistics.uei); |
| 1027 | n += scnprintf(buf + n, PAGE_SIZE - n, "» pci = %d\n", |
| 1028 | isr_statistics.pci); |
| 1029 | n += scnprintf(buf + n, PAGE_SIZE - n, "» uri = %d\n", |
| 1030 | isr_statistics.uri); |
| 1031 | n += scnprintf(buf + n, PAGE_SIZE - n, "» sli = %d\n", |
| 1032 | isr_statistics.sli); |
| 1033 | n += scnprintf(buf + n, PAGE_SIZE - n, "*none = %d\n", |
| 1034 | isr_statistics.none); |
| 1035 | n += scnprintf(buf + n, PAGE_SIZE - n, "*hndl = %d\n", |
| 1036 | isr_statistics.hndl.cnt); |
| 1037 | |
| 1038 | for (i = isr_statistics.hndl.idx, j = 0; j <= ISR_MASK; j++, i++) { |
| 1039 | i &= ISR_MASK; |
| 1040 | intr = isr_statistics.hndl.buf[i]; |
| 1041 | |
| 1042 | if (USBi_UI & intr) |
| 1043 | n += scnprintf(buf + n, PAGE_SIZE - n, "ui "); |
| 1044 | intr &= ~USBi_UI; |
| 1045 | if (USBi_UEI & intr) |
| 1046 | n += scnprintf(buf + n, PAGE_SIZE - n, "uei "); |
| 1047 | intr &= ~USBi_UEI; |
| 1048 | if (USBi_PCI & intr) |
| 1049 | n += scnprintf(buf + n, PAGE_SIZE - n, "pci "); |
| 1050 | intr &= ~USBi_PCI; |
| 1051 | if (USBi_URI & intr) |
| 1052 | n += scnprintf(buf + n, PAGE_SIZE - n, "uri "); |
| 1053 | intr &= ~USBi_URI; |
| 1054 | if (USBi_SLI & intr) |
| 1055 | n += scnprintf(buf + n, PAGE_SIZE - n, "sli "); |
| 1056 | intr &= ~USBi_SLI; |
| 1057 | if (intr) |
| 1058 | n += scnprintf(buf + n, PAGE_SIZE - n, "??? "); |
| 1059 | if (isr_statistics.hndl.buf[i]) |
| 1060 | n += scnprintf(buf + n, PAGE_SIZE - n, "\n"); |
| 1061 | } |
| 1062 | |
| 1063 | spin_unlock_irqrestore(udc->lock, flags); |
| 1064 | |
| 1065 | return n; |
| 1066 | } |
| 1067 | |
| 1068 | /** |
| 1069 | * store_inters: enable & force or disable an individual interrutps |
| 1070 | * (to be used for test purposes only) |
| 1071 | * |
| 1072 | * Check "device.h" for details |
| 1073 | */ |
| 1074 | static ssize_t store_inters(struct device *dev, struct device_attribute *attr, |
| 1075 | const char *buf, size_t count) |
| 1076 | { |
| 1077 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 1078 | unsigned long flags; |
| 1079 | unsigned en, bit; |
| 1080 | |
| 1081 | dbg_trace("[%s] %p, %d\n", __func__, buf, count); |
| 1082 | if (attr == NULL || buf == NULL) { |
| 1083 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 1084 | goto done; |
| 1085 | } |
| 1086 | |
| 1087 | if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) { |
| 1088 | dev_err(dev, "<1|0> <bit>: enable|disable interrupt"); |
| 1089 | goto done; |
| 1090 | } |
| 1091 | |
| 1092 | spin_lock_irqsave(udc->lock, flags); |
| 1093 | if (en) { |
| 1094 | if (hw_intr_force(bit)) |
| 1095 | dev_err(dev, "invalid bit number\n"); |
| 1096 | else |
| 1097 | isr_statistics.test++; |
| 1098 | } else { |
| 1099 | if (hw_intr_clear(bit)) |
| 1100 | dev_err(dev, "invalid bit number\n"); |
| 1101 | } |
| 1102 | spin_unlock_irqrestore(udc->lock, flags); |
| 1103 | |
| 1104 | done: |
| 1105 | return count; |
| 1106 | } |
| 1107 | static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters); |
| 1108 | |
| 1109 | /** |
| 1110 | * show_port_test: reads port test mode |
| 1111 | * |
| 1112 | * Check "device.h" for details |
| 1113 | */ |
| 1114 | static ssize_t show_port_test(struct device *dev, |
| 1115 | struct device_attribute *attr, char *buf) |
| 1116 | { |
| 1117 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 1118 | unsigned long flags; |
| 1119 | unsigned mode; |
| 1120 | |
| 1121 | dbg_trace("[%s] %p\n", __func__, buf); |
| 1122 | if (attr == NULL || buf == NULL) { |
| 1123 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 1124 | return 0; |
| 1125 | } |
| 1126 | |
| 1127 | spin_lock_irqsave(udc->lock, flags); |
| 1128 | mode = hw_port_test_get(); |
| 1129 | spin_unlock_irqrestore(udc->lock, flags); |
| 1130 | |
| 1131 | return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode); |
| 1132 | } |
| 1133 | |
| 1134 | /** |
| 1135 | * store_port_test: writes port test mode |
| 1136 | * |
| 1137 | * Check "device.h" for details |
| 1138 | */ |
| 1139 | static ssize_t store_port_test(struct device *dev, |
| 1140 | struct device_attribute *attr, |
| 1141 | const char *buf, size_t count) |
| 1142 | { |
| 1143 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 1144 | unsigned long flags; |
| 1145 | unsigned mode; |
| 1146 | |
| 1147 | dbg_trace("[%s] %p, %d\n", __func__, buf, count); |
| 1148 | if (attr == NULL || buf == NULL) { |
| 1149 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 1150 | goto done; |
| 1151 | } |
| 1152 | |
| 1153 | if (sscanf(buf, "%u", &mode) != 1) { |
| 1154 | dev_err(dev, "<mode>: set port test mode"); |
| 1155 | goto done; |
| 1156 | } |
| 1157 | |
| 1158 | spin_lock_irqsave(udc->lock, flags); |
| 1159 | if (hw_port_test_set(mode)) |
| 1160 | dev_err(dev, "invalid mode\n"); |
| 1161 | spin_unlock_irqrestore(udc->lock, flags); |
| 1162 | |
| 1163 | done: |
| 1164 | return count; |
| 1165 | } |
| 1166 | static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR, |
| 1167 | show_port_test, store_port_test); |
| 1168 | |
| 1169 | /** |
| 1170 | * show_qheads: DMA contents of all queue heads |
| 1171 | * |
| 1172 | * Check "device.h" for details |
| 1173 | */ |
| 1174 | static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, |
| 1175 | char *buf) |
| 1176 | { |
| 1177 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 1178 | unsigned long flags; |
| 1179 | unsigned i, j, n = 0; |
| 1180 | |
| 1181 | dbg_trace("[%s] %p\n", __func__, buf); |
| 1182 | if (attr == NULL || buf == NULL) { |
| 1183 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 1184 | return 0; |
| 1185 | } |
| 1186 | |
| 1187 | spin_lock_irqsave(udc->lock, flags); |
| 1188 | for (i = 0; i < hw_ep_max; i++) { |
| 1189 | struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; |
| 1190 | n += scnprintf(buf + n, PAGE_SIZE - n, |
| 1191 | "EP=%02i: RX=%08X TX=%08X\n", |
| 1192 | i, (u32)mEp->qh[RX].dma, (u32)mEp->qh[TX].dma); |
| 1193 | for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) { |
| 1194 | n += scnprintf(buf + n, PAGE_SIZE - n, |
| 1195 | " %04X: %08X %08X\n", j, |
| 1196 | *((u32 *)mEp->qh[RX].ptr + j), |
| 1197 | *((u32 *)mEp->qh[TX].ptr + j)); |
| 1198 | } |
| 1199 | } |
| 1200 | spin_unlock_irqrestore(udc->lock, flags); |
| 1201 | |
| 1202 | return n; |
| 1203 | } |
| 1204 | static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL); |
| 1205 | |
| 1206 | /** |
| 1207 | * show_registers: dumps all registers |
| 1208 | * |
| 1209 | * Check "device.h" for details |
| 1210 | */ |
| 1211 | static ssize_t show_registers(struct device *dev, |
| 1212 | struct device_attribute *attr, char *buf) |
| 1213 | { |
| 1214 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 1215 | unsigned long flags; |
| 1216 | u32 dump[512]; |
| 1217 | unsigned i, k, n = 0; |
| 1218 | |
| 1219 | dbg_trace("[%s] %p\n", __func__, buf); |
| 1220 | if (attr == NULL || buf == NULL) { |
| 1221 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 1222 | return 0; |
| 1223 | } |
| 1224 | |
| 1225 | spin_lock_irqsave(udc->lock, flags); |
| 1226 | k = hw_register_read(dump, sizeof(dump)/sizeof(u32)); |
| 1227 | spin_unlock_irqrestore(udc->lock, flags); |
| 1228 | |
| 1229 | for (i = 0; i < k; i++) { |
| 1230 | n += scnprintf(buf + n, PAGE_SIZE - n, |
| 1231 | "reg[0x%04X] = 0x%08X\n", |
| 1232 | i * (unsigned)sizeof(u32), dump[i]); |
| 1233 | } |
| 1234 | |
| 1235 | return n; |
| 1236 | } |
| 1237 | |
| 1238 | /** |
| 1239 | * store_registers: writes value to register address |
| 1240 | * |
| 1241 | * Check "device.h" for details |
| 1242 | */ |
| 1243 | static ssize_t store_registers(struct device *dev, |
| 1244 | struct device_attribute *attr, |
| 1245 | const char *buf, size_t count) |
| 1246 | { |
| 1247 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 1248 | unsigned long addr, data, flags; |
| 1249 | |
| 1250 | dbg_trace("[%s] %p, %d\n", __func__, buf, count); |
| 1251 | if (attr == NULL || buf == NULL) { |
| 1252 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 1253 | goto done; |
| 1254 | } |
| 1255 | |
| 1256 | if (sscanf(buf, "%li %li", &addr, &data) != 2) { |
| 1257 | dev_err(dev, "<addr> <data>: write data to register address"); |
| 1258 | goto done; |
| 1259 | } |
| 1260 | |
| 1261 | spin_lock_irqsave(udc->lock, flags); |
| 1262 | if (hw_register_write(addr, data)) |
| 1263 | dev_err(dev, "invalid address range\n"); |
| 1264 | spin_unlock_irqrestore(udc->lock, flags); |
| 1265 | |
| 1266 | done: |
| 1267 | return count; |
| 1268 | } |
| 1269 | static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR, |
| 1270 | show_registers, store_registers); |
| 1271 | |
| 1272 | /** |
| 1273 | * show_requests: DMA contents of all requests currently queued (all endpts) |
| 1274 | * |
| 1275 | * Check "device.h" for details |
| 1276 | */ |
| 1277 | static ssize_t show_requests(struct device *dev, struct device_attribute *attr, |
| 1278 | char *buf) |
| 1279 | { |
| 1280 | struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); |
| 1281 | unsigned long flags; |
| 1282 | struct list_head *ptr = NULL; |
| 1283 | struct ci13xxx_req *req = NULL; |
| 1284 | unsigned i, j, k, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); |
| 1285 | |
| 1286 | dbg_trace("[%s] %p\n", __func__, buf); |
| 1287 | if (attr == NULL || buf == NULL) { |
| 1288 | dev_err(dev, "[%s] EINVAL\n", __func__); |
| 1289 | return 0; |
| 1290 | } |
| 1291 | |
| 1292 | spin_lock_irqsave(udc->lock, flags); |
| 1293 | for (i = 0; i < hw_ep_max; i++) |
| 1294 | for (k = RX; k <= TX; k++) |
| 1295 | list_for_each(ptr, &udc->ci13xxx_ep[i].qh[k].queue) |
| 1296 | { |
| 1297 | req = list_entry(ptr, |
| 1298 | struct ci13xxx_req, queue); |
| 1299 | |
| 1300 | n += scnprintf(buf + n, PAGE_SIZE - n, |
| 1301 | "EP=%02i: TD=%08X %s\n", |
| 1302 | i, (u32)req->dma, |
| 1303 | ((k == RX) ? "RX" : "TX")); |
| 1304 | |
| 1305 | for (j = 0; j < qSize; j++) |
| 1306 | n += scnprintf(buf + n, PAGE_SIZE - n, |
| 1307 | " %04X: %08X\n", j, |
| 1308 | *((u32 *)req->ptr + j)); |
| 1309 | } |
| 1310 | spin_unlock_irqrestore(udc->lock, flags); |
| 1311 | |
| 1312 | return n; |
| 1313 | } |
| 1314 | static DEVICE_ATTR(requests, S_IRUSR, show_requests, NULL); |
| 1315 | |
| 1316 | /** |
| 1317 | * dbg_create_files: initializes the attribute interface |
| 1318 | * @dev: device |
| 1319 | * |
| 1320 | * This function returns an error code |
| 1321 | */ |
| 1322 | __maybe_unused static int dbg_create_files(struct device *dev) |
| 1323 | { |
| 1324 | int retval = 0; |
| 1325 | |
| 1326 | if (dev == NULL) |
| 1327 | return -EINVAL; |
| 1328 | retval = device_create_file(dev, &dev_attr_device); |
| 1329 | if (retval) |
| 1330 | goto done; |
| 1331 | retval = device_create_file(dev, &dev_attr_driver); |
| 1332 | if (retval) |
| 1333 | goto rm_device; |
| 1334 | retval = device_create_file(dev, &dev_attr_events); |
| 1335 | if (retval) |
| 1336 | goto rm_driver; |
| 1337 | retval = device_create_file(dev, &dev_attr_inters); |
| 1338 | if (retval) |
| 1339 | goto rm_events; |
| 1340 | retval = device_create_file(dev, &dev_attr_port_test); |
| 1341 | if (retval) |
| 1342 | goto rm_inters; |
| 1343 | retval = device_create_file(dev, &dev_attr_qheads); |
| 1344 | if (retval) |
| 1345 | goto rm_port_test; |
| 1346 | retval = device_create_file(dev, &dev_attr_registers); |
| 1347 | if (retval) |
| 1348 | goto rm_qheads; |
| 1349 | retval = device_create_file(dev, &dev_attr_requests); |
| 1350 | if (retval) |
| 1351 | goto rm_registers; |
| 1352 | return 0; |
| 1353 | |
| 1354 | rm_registers: |
| 1355 | device_remove_file(dev, &dev_attr_registers); |
| 1356 | rm_qheads: |
| 1357 | device_remove_file(dev, &dev_attr_qheads); |
| 1358 | rm_port_test: |
| 1359 | device_remove_file(dev, &dev_attr_port_test); |
| 1360 | rm_inters: |
| 1361 | device_remove_file(dev, &dev_attr_inters); |
| 1362 | rm_events: |
| 1363 | device_remove_file(dev, &dev_attr_events); |
| 1364 | rm_driver: |
| 1365 | device_remove_file(dev, &dev_attr_driver); |
| 1366 | rm_device: |
| 1367 | device_remove_file(dev, &dev_attr_device); |
| 1368 | done: |
| 1369 | return retval; |
| 1370 | } |
| 1371 | |
| 1372 | /** |
| 1373 | * dbg_remove_files: destroys the attribute interface |
| 1374 | * @dev: device |
| 1375 | * |
| 1376 | * This function returns an error code |
| 1377 | */ |
| 1378 | __maybe_unused static int dbg_remove_files(struct device *dev) |
| 1379 | { |
| 1380 | if (dev == NULL) |
| 1381 | return -EINVAL; |
| 1382 | device_remove_file(dev, &dev_attr_requests); |
| 1383 | device_remove_file(dev, &dev_attr_registers); |
| 1384 | device_remove_file(dev, &dev_attr_qheads); |
| 1385 | device_remove_file(dev, &dev_attr_port_test); |
| 1386 | device_remove_file(dev, &dev_attr_inters); |
| 1387 | device_remove_file(dev, &dev_attr_events); |
| 1388 | device_remove_file(dev, &dev_attr_driver); |
| 1389 | device_remove_file(dev, &dev_attr_device); |
| 1390 | return 0; |
| 1391 | } |
| 1392 | |
| 1393 | /****************************************************************************** |
| 1394 | * UTIL block |
| 1395 | *****************************************************************************/ |
| 1396 | /** |
| 1397 | * _usb_addr: calculates endpoint address from direction & number |
| 1398 | * @ep: endpoint |
| 1399 | */ |
| 1400 | static inline u8 _usb_addr(struct ci13xxx_ep *ep) |
| 1401 | { |
| 1402 | return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num; |
| 1403 | } |
| 1404 | |
| 1405 | /** |
| 1406 | * _hardware_queue: configures a request at hardware level |
| 1407 | * @gadget: gadget |
| 1408 | * @mEp: endpoint |
| 1409 | * |
| 1410 | * This function returns an error code |
| 1411 | */ |
| 1412 | static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) |
| 1413 | { |
| 1414 | unsigned i; |
| 1415 | |
| 1416 | trace("%p, %p", mEp, mReq); |
| 1417 | |
| 1418 | /* don't queue twice */ |
| 1419 | if (mReq->req.status == -EALREADY) |
| 1420 | return -EALREADY; |
| 1421 | |
| 1422 | if (hw_ep_is_primed(mEp->num, mEp->dir)) |
| 1423 | return -EBUSY; |
| 1424 | |
| 1425 | mReq->req.status = -EALREADY; |
| 1426 | |
| 1427 | if (mReq->req.length && !mReq->req.dma) { |
| 1428 | mReq->req.dma = \ |
| 1429 | dma_map_single(mEp->device, mReq->req.buf, |
| 1430 | mReq->req.length, mEp->dir ? |
| 1431 | DMA_TO_DEVICE : DMA_FROM_DEVICE); |
| 1432 | if (mReq->req.dma == 0) |
| 1433 | return -ENOMEM; |
| 1434 | |
| 1435 | mReq->map = 1; |
| 1436 | } |
| 1437 | |
| 1438 | /* |
| 1439 | * TD configuration |
| 1440 | * TODO - handle requests which spawns into several TDs |
| 1441 | */ |
| 1442 | memset(mReq->ptr, 0, sizeof(*mReq->ptr)); |
| 1443 | mReq->ptr->next |= TD_TERMINATE; |
| 1444 | mReq->ptr->token = mReq->req.length << ffs_nr(TD_TOTAL_BYTES); |
| 1445 | mReq->ptr->token &= TD_TOTAL_BYTES; |
| 1446 | mReq->ptr->token |= TD_IOC; |
| 1447 | mReq->ptr->token |= TD_STATUS_ACTIVE; |
| 1448 | mReq->ptr->page[0] = mReq->req.dma; |
| 1449 | for (i = 1; i < 5; i++) |
| 1450 | mReq->ptr->page[i] = |
| 1451 | (mReq->req.dma + i * PAGE_SIZE) & ~TD_RESERVED_MASK; |
| 1452 | |
| 1453 | /* |
| 1454 | * QH configuration |
| 1455 | * At this point it's guaranteed exclusive access to qhead |
| 1456 | * (endpt is not primed) so it's no need to use tripwire |
| 1457 | */ |
| 1458 | mEp->qh[mEp->dir].ptr->td.next = mReq->dma; /* TERMINATE = 0 */ |
| 1459 | mEp->qh[mEp->dir].ptr->td.token &= ~TD_STATUS; /* clear status */ |
| 1460 | if (mReq->req.zero == 0) |
| 1461 | mEp->qh[mEp->dir].ptr->cap |= QH_ZLT; |
| 1462 | else |
| 1463 | mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT; |
| 1464 | |
| 1465 | wmb(); /* synchronize before ep prime */ |
| 1466 | |
| 1467 | return hw_ep_prime(mEp->num, mEp->dir, |
| 1468 | mEp->type == USB_ENDPOINT_XFER_CONTROL); |
| 1469 | } |
| 1470 | |
| 1471 | /** |
| 1472 | * _hardware_dequeue: handles a request at hardware level |
| 1473 | * @gadget: gadget |
| 1474 | * @mEp: endpoint |
| 1475 | * |
| 1476 | * This function returns an error code |
| 1477 | */ |
| 1478 | static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) |
| 1479 | { |
| 1480 | trace("%p, %p", mEp, mReq); |
| 1481 | |
| 1482 | if (mReq->req.status != -EALREADY) |
| 1483 | return -EINVAL; |
| 1484 | |
| 1485 | if (hw_ep_is_primed(mEp->num, mEp->dir)) |
| 1486 | hw_ep_flush(mEp->num, mEp->dir); |
| 1487 | |
| 1488 | mReq->req.status = 0; |
| 1489 | |
| 1490 | if (mReq->map) { |
| 1491 | dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, |
| 1492 | mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); |
| 1493 | mReq->req.dma = 0; |
| 1494 | mReq->map = 0; |
| 1495 | } |
| 1496 | |
| 1497 | mReq->req.status = mReq->ptr->token & TD_STATUS; |
| 1498 | if ((TD_STATUS_ACTIVE & mReq->req.status) != 0) |
| 1499 | mReq->req.status = -ECONNRESET; |
| 1500 | else if ((TD_STATUS_HALTED & mReq->req.status) != 0) |
| 1501 | mReq->req.status = -1; |
| 1502 | else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0) |
| 1503 | mReq->req.status = -1; |
| 1504 | else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0) |
| 1505 | mReq->req.status = -1; |
| 1506 | |
| 1507 | mReq->req.actual = mReq->ptr->token & TD_TOTAL_BYTES; |
| 1508 | mReq->req.actual >>= ffs_nr(TD_TOTAL_BYTES); |
| 1509 | mReq->req.actual = mReq->req.length - mReq->req.actual; |
| 1510 | mReq->req.actual = mReq->req.status ? 0 : mReq->req.actual; |
| 1511 | |
| 1512 | return mReq->req.actual; |
| 1513 | } |
| 1514 | |
| 1515 | /** |
| 1516 | * _ep_nuke: dequeues all endpoint requests |
| 1517 | * @mEp: endpoint |
| 1518 | * |
| 1519 | * This function returns an error code |
| 1520 | * Caller must hold lock |
| 1521 | */ |
| 1522 | static int _ep_nuke(struct ci13xxx_ep *mEp) |
| 1523 | __releases(mEp->lock) |
| 1524 | __acquires(mEp->lock) |
| 1525 | { |
| 1526 | trace("%p", mEp); |
| 1527 | |
| 1528 | if (mEp == NULL) |
| 1529 | return -EINVAL; |
| 1530 | |
| 1531 | hw_ep_flush(mEp->num, mEp->dir); |
| 1532 | |
| 1533 | while (!list_empty(&mEp->qh[mEp->dir].queue)) { |
| 1534 | |
| 1535 | /* pop oldest request */ |
| 1536 | struct ci13xxx_req *mReq = \ |
| 1537 | list_entry(mEp->qh[mEp->dir].queue.next, |
| 1538 | struct ci13xxx_req, queue); |
| 1539 | list_del_init(&mReq->queue); |
| 1540 | mReq->req.status = -ESHUTDOWN; |
| 1541 | |
| 1542 | if (!mReq->req.no_interrupt && mReq->req.complete != NULL) { |
| 1543 | spin_unlock(mEp->lock); |
| 1544 | mReq->req.complete(&mEp->ep, &mReq->req); |
| 1545 | spin_lock(mEp->lock); |
| 1546 | } |
| 1547 | } |
| 1548 | return 0; |
| 1549 | } |
| 1550 | |
| 1551 | /** |
| 1552 | * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts |
| 1553 | * @gadget: gadget |
| 1554 | * |
| 1555 | * This function returns an error code |
| 1556 | * Caller must hold lock |
| 1557 | */ |
| 1558 | static int _gadget_stop_activity(struct usb_gadget *gadget) |
| 1559 | __releases(udc->lock) |
| 1560 | __acquires(udc->lock) |
| 1561 | { |
| 1562 | struct usb_ep *ep; |
| 1563 | struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); |
| 1564 | struct ci13xxx_ep *mEp = container_of(gadget->ep0, |
| 1565 | struct ci13xxx_ep, ep); |
| 1566 | |
| 1567 | trace("%p", gadget); |
| 1568 | |
| 1569 | if (gadget == NULL) |
| 1570 | return -EINVAL; |
| 1571 | |
| 1572 | spin_unlock(udc->lock); |
| 1573 | |
| 1574 | /* flush all endpoints */ |
| 1575 | gadget_for_each_ep(ep, gadget) { |
| 1576 | usb_ep_fifo_flush(ep); |
| 1577 | } |
| 1578 | usb_ep_fifo_flush(gadget->ep0); |
| 1579 | |
| 1580 | udc->driver->disconnect(gadget); |
| 1581 | |
| 1582 | /* make sure to disable all endpoints */ |
| 1583 | gadget_for_each_ep(ep, gadget) { |
| 1584 | usb_ep_disable(ep); |
| 1585 | } |
| 1586 | usb_ep_disable(gadget->ep0); |
| 1587 | |
| 1588 | if (mEp->status != NULL) { |
| 1589 | usb_ep_free_request(gadget->ep0, mEp->status); |
| 1590 | mEp->status = NULL; |
| 1591 | } |
| 1592 | |
| 1593 | spin_lock(udc->lock); |
| 1594 | |
| 1595 | return 0; |
| 1596 | } |
| 1597 | |
| 1598 | /****************************************************************************** |
| 1599 | * ISR block |
| 1600 | *****************************************************************************/ |
| 1601 | /** |
| 1602 | * isr_reset_handler: USB reset interrupt handler |
| 1603 | * @udc: UDC device |
| 1604 | * |
| 1605 | * This function resets USB engine after a bus reset occurred |
| 1606 | */ |
| 1607 | static void isr_reset_handler(struct ci13xxx *udc) |
| 1608 | __releases(udc->lock) |
| 1609 | __acquires(udc->lock) |
| 1610 | { |
| 1611 | struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[0]; |
| 1612 | int retval; |
| 1613 | |
| 1614 | trace("%p", udc); |
| 1615 | |
| 1616 | if (udc == NULL) { |
| 1617 | err("EINVAL"); |
| 1618 | return; |
| 1619 | } |
| 1620 | |
| 1621 | dbg_event(0xFF, "BUS RST", 0); |
| 1622 | |
| 1623 | retval = _gadget_stop_activity(&udc->gadget); |
| 1624 | if (retval) |
| 1625 | goto done; |
| 1626 | |
| 1627 | retval = hw_usb_reset(); |
| 1628 | if (retval) |
| 1629 | goto done; |
| 1630 | |
| 1631 | spin_unlock(udc->lock); |
| 1632 | retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc); |
| 1633 | if (!retval) { |
| 1634 | mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_KERNEL); |
| 1635 | if (mEp->status == NULL) { |
| 1636 | usb_ep_disable(&mEp->ep); |
| 1637 | retval = -ENOMEM; |
| 1638 | } |
| 1639 | } |
| 1640 | spin_lock(udc->lock); |
| 1641 | |
| 1642 | done: |
| 1643 | if (retval) |
| 1644 | err("error: %i", retval); |
| 1645 | } |
| 1646 | |
| 1647 | /** |
| 1648 | * isr_get_status_complete: get_status request complete function |
| 1649 | * @ep: endpoint |
| 1650 | * @req: request handled |
| 1651 | * |
| 1652 | * Caller must release lock |
| 1653 | */ |
| 1654 | static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) |
| 1655 | { |
| 1656 | trace("%p, %p", ep, req); |
| 1657 | |
| 1658 | if (ep == NULL || req == NULL) { |
| 1659 | err("EINVAL"); |
| 1660 | return; |
| 1661 | } |
| 1662 | |
| 1663 | kfree(req->buf); |
| 1664 | usb_ep_free_request(ep, req); |
| 1665 | } |
| 1666 | |
| 1667 | /** |
| 1668 | * isr_get_status_response: get_status request response |
| 1669 | * @ep: endpoint |
| 1670 | * @setup: setup request packet |
| 1671 | * |
| 1672 | * This function returns an error code |
| 1673 | */ |
| 1674 | static int isr_get_status_response(struct ci13xxx_ep *mEp, |
| 1675 | struct usb_ctrlrequest *setup) |
| 1676 | __releases(mEp->lock) |
| 1677 | __acquires(mEp->lock) |
| 1678 | { |
| 1679 | struct usb_request *req = NULL; |
| 1680 | gfp_t gfp_flags = GFP_ATOMIC; |
| 1681 | int dir, num, retval; |
| 1682 | |
| 1683 | trace("%p, %p", mEp, setup); |
| 1684 | |
| 1685 | if (mEp == NULL || setup == NULL) |
| 1686 | return -EINVAL; |
| 1687 | |
| 1688 | spin_unlock(mEp->lock); |
| 1689 | req = usb_ep_alloc_request(&mEp->ep, gfp_flags); |
| 1690 | spin_lock(mEp->lock); |
| 1691 | if (req == NULL) |
| 1692 | return -ENOMEM; |
| 1693 | |
| 1694 | req->complete = isr_get_status_complete; |
| 1695 | req->length = 2; |
| 1696 | req->buf = kzalloc(req->length, gfp_flags); |
| 1697 | if (req->buf == NULL) { |
| 1698 | retval = -ENOMEM; |
| 1699 | goto err_free_req; |
| 1700 | } |
| 1701 | |
| 1702 | if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { |
| 1703 | /* TODO: D1 - Remote Wakeup; D0 - Self Powered */ |
| 1704 | retval = 0; |
| 1705 | } else if ((setup->bRequestType & USB_RECIP_MASK) \ |
| 1706 | == USB_RECIP_ENDPOINT) { |
| 1707 | dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? |
| 1708 | TX : RX; |
| 1709 | num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; |
| 1710 | *((u16 *)req->buf) = hw_ep_get_halt(num, dir); |
| 1711 | } |
| 1712 | /* else do nothing; reserved for future use */ |
| 1713 | |
| 1714 | spin_unlock(mEp->lock); |
| 1715 | retval = usb_ep_queue(&mEp->ep, req, gfp_flags); |
| 1716 | spin_lock(mEp->lock); |
| 1717 | if (retval) |
| 1718 | goto err_free_buf; |
| 1719 | |
| 1720 | return 0; |
| 1721 | |
| 1722 | err_free_buf: |
| 1723 | kfree(req->buf); |
| 1724 | err_free_req: |
| 1725 | spin_unlock(mEp->lock); |
| 1726 | usb_ep_free_request(&mEp->ep, req); |
| 1727 | spin_lock(mEp->lock); |
| 1728 | return retval; |
| 1729 | } |
| 1730 | |
| 1731 | /** |
| 1732 | * isr_setup_status_phase: queues the status phase of a setup transation |
| 1733 | * @mEp: endpoint |
| 1734 | * |
| 1735 | * This function returns an error code |
| 1736 | */ |
| 1737 | static int isr_setup_status_phase(struct ci13xxx_ep *mEp) |
| 1738 | __releases(mEp->lock) |
| 1739 | __acquires(mEp->lock) |
| 1740 | { |
| 1741 | int retval; |
| 1742 | |
| 1743 | trace("%p", mEp); |
| 1744 | |
| 1745 | /* mEp is always valid & configured */ |
| 1746 | |
| 1747 | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) |
| 1748 | mEp->dir = (mEp->dir == TX) ? RX : TX; |
| 1749 | |
| 1750 | mEp->status->no_interrupt = 1; |
| 1751 | |
| 1752 | spin_unlock(mEp->lock); |
| 1753 | retval = usb_ep_queue(&mEp->ep, mEp->status, GFP_ATOMIC); |
| 1754 | spin_lock(mEp->lock); |
| 1755 | |
| 1756 | return retval; |
| 1757 | } |
| 1758 | |
| 1759 | /** |
| 1760 | * isr_tr_complete_low: transaction complete low level handler |
| 1761 | * @mEp: endpoint |
| 1762 | * |
| 1763 | * This function returns an error code |
| 1764 | * Caller must hold lock |
| 1765 | */ |
| 1766 | static int isr_tr_complete_low(struct ci13xxx_ep *mEp) |
| 1767 | __releases(mEp->lock) |
| 1768 | __acquires(mEp->lock) |
| 1769 | { |
| 1770 | struct ci13xxx_req *mReq; |
| 1771 | int retval; |
| 1772 | |
| 1773 | trace("%p", mEp); |
| 1774 | |
| 1775 | if (list_empty(&mEp->qh[mEp->dir].queue)) |
| 1776 | return -EINVAL; |
| 1777 | |
| 1778 | /* pop oldest request */ |
| 1779 | mReq = list_entry(mEp->qh[mEp->dir].queue.next, |
| 1780 | struct ci13xxx_req, queue); |
| 1781 | list_del_init(&mReq->queue); |
| 1782 | |
| 1783 | retval = _hardware_dequeue(mEp, mReq); |
| 1784 | if (retval < 0) { |
| 1785 | dbg_event(_usb_addr(mEp), "DONE", retval); |
| 1786 | goto done; |
| 1787 | } |
| 1788 | |
| 1789 | dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); |
| 1790 | |
| 1791 | if (!mReq->req.no_interrupt && mReq->req.complete != NULL) { |
| 1792 | spin_unlock(mEp->lock); |
| 1793 | mReq->req.complete(&mEp->ep, &mReq->req); |
| 1794 | spin_lock(mEp->lock); |
| 1795 | } |
| 1796 | |
| 1797 | if (!list_empty(&mEp->qh[mEp->dir].queue)) { |
| 1798 | mReq = list_entry(mEp->qh[mEp->dir].queue.next, |
| 1799 | struct ci13xxx_req, queue); |
| 1800 | _hardware_enqueue(mEp, mReq); |
| 1801 | } |
| 1802 | |
| 1803 | done: |
| 1804 | return retval; |
| 1805 | } |
| 1806 | |
| 1807 | /** |
| 1808 | * isr_tr_complete_handler: transaction complete interrupt handler |
| 1809 | * @udc: UDC descriptor |
| 1810 | * |
| 1811 | * This function handles traffic events |
| 1812 | */ |
| 1813 | static void isr_tr_complete_handler(struct ci13xxx *udc) |
| 1814 | __releases(udc->lock) |
| 1815 | __acquires(udc->lock) |
| 1816 | { |
| 1817 | unsigned i; |
| 1818 | |
| 1819 | trace("%p", udc); |
| 1820 | |
| 1821 | if (udc == NULL) { |
| 1822 | err("EINVAL"); |
| 1823 | return; |
| 1824 | } |
| 1825 | |
| 1826 | for (i = 0; i < hw_ep_max; i++) { |
| 1827 | struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; |
| 1828 | int type, num, err = -EINVAL; |
| 1829 | struct usb_ctrlrequest req; |
| 1830 | |
| 1831 | |
| 1832 | if (mEp->desc == NULL) |
| 1833 | continue; /* not configured */ |
| 1834 | |
| 1835 | if ((mEp->dir == RX && hw_test_and_clear_complete(i)) || |
| 1836 | (mEp->dir == TX && hw_test_and_clear_complete(i + 16))) { |
| 1837 | err = isr_tr_complete_low(mEp); |
| 1838 | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { |
| 1839 | if (err > 0) /* needs status phase */ |
| 1840 | err = isr_setup_status_phase(mEp); |
| 1841 | if (err < 0) { |
| 1842 | dbg_event(_usb_addr(mEp), |
| 1843 | "ERROR", err); |
| 1844 | spin_unlock(udc->lock); |
| 1845 | if (usb_ep_set_halt(&mEp->ep)) |
| 1846 | err("error: ep_set_halt"); |
| 1847 | spin_lock(udc->lock); |
| 1848 | } |
| 1849 | } |
| 1850 | } |
| 1851 | |
| 1852 | if (mEp->type != USB_ENDPOINT_XFER_CONTROL || |
| 1853 | !hw_test_and_clear_setup_status(i)) |
| 1854 | continue; |
| 1855 | |
| 1856 | if (i != 0) { |
| 1857 | warn("ctrl traffic received at endpoint"); |
| 1858 | continue; |
| 1859 | } |
| 1860 | |
| 1861 | /* read_setup_packet */ |
| 1862 | do { |
| 1863 | hw_test_and_set_setup_guard(); |
| 1864 | memcpy(&req, &mEp->qh[RX].ptr->setup, sizeof(req)); |
| 1865 | } while (!hw_test_and_clear_setup_guard()); |
| 1866 | |
| 1867 | type = req.bRequestType; |
| 1868 | |
| 1869 | mEp->dir = (type & USB_DIR_IN) ? TX : RX; |
| 1870 | |
| 1871 | dbg_setup(_usb_addr(mEp), &req); |
| 1872 | |
| 1873 | switch (req.bRequest) { |
| 1874 | case USB_REQ_CLEAR_FEATURE: |
| 1875 | if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) && |
| 1876 | le16_to_cpu(req.wValue) != USB_ENDPOINT_HALT) |
| 1877 | goto delegate; |
| 1878 | if (req.wLength != 0) |
| 1879 | break; |
| 1880 | num = le16_to_cpu(req.wIndex); |
| 1881 | num &= USB_ENDPOINT_NUMBER_MASK; |
| 1882 | if (!udc->ci13xxx_ep[num].wedge) { |
| 1883 | spin_unlock(udc->lock); |
| 1884 | err = usb_ep_clear_halt( |
| 1885 | &udc->ci13xxx_ep[num].ep); |
| 1886 | spin_lock(udc->lock); |
| 1887 | if (err) |
| 1888 | break; |
| 1889 | } |
| 1890 | err = isr_setup_status_phase(mEp); |
| 1891 | break; |
| 1892 | case USB_REQ_GET_STATUS: |
| 1893 | if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && |
| 1894 | type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && |
| 1895 | type != (USB_DIR_IN|USB_RECIP_INTERFACE)) |
| 1896 | goto delegate; |
| 1897 | if (le16_to_cpu(req.wLength) != 2 || |
| 1898 | le16_to_cpu(req.wValue) != 0) |
| 1899 | break; |
| 1900 | err = isr_get_status_response(mEp, &req); |
| 1901 | break; |
| 1902 | case USB_REQ_SET_ADDRESS: |
| 1903 | if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) |
| 1904 | goto delegate; |
| 1905 | if (le16_to_cpu(req.wLength) != 0 || |
| 1906 | le16_to_cpu(req.wIndex) != 0) |
| 1907 | break; |
| 1908 | err = hw_usb_set_address((u8)le16_to_cpu(req.wValue)); |
| 1909 | if (err) |
| 1910 | break; |
| 1911 | err = isr_setup_status_phase(mEp); |
| 1912 | break; |
| 1913 | case USB_REQ_SET_FEATURE: |
| 1914 | if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) && |
| 1915 | le16_to_cpu(req.wValue) != USB_ENDPOINT_HALT) |
| 1916 | goto delegate; |
| 1917 | if (req.wLength != 0) |
| 1918 | break; |
| 1919 | num = le16_to_cpu(req.wIndex); |
| 1920 | num &= USB_ENDPOINT_NUMBER_MASK; |
| 1921 | |
| 1922 | spin_unlock(udc->lock); |
| 1923 | err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep); |
| 1924 | spin_lock(udc->lock); |
| 1925 | if (err) |
| 1926 | break; |
| 1927 | err = isr_setup_status_phase(mEp); |
| 1928 | break; |
| 1929 | default: |
| 1930 | delegate: |
| 1931 | if (req.wLength == 0) /* no data phase */ |
| 1932 | mEp->dir = TX; |
| 1933 | |
| 1934 | spin_unlock(udc->lock); |
| 1935 | err = udc->driver->setup(&udc->gadget, &req); |
| 1936 | spin_lock(udc->lock); |
| 1937 | break; |
| 1938 | } |
| 1939 | |
| 1940 | if (err < 0) { |
| 1941 | dbg_event(_usb_addr(mEp), "ERROR", err); |
| 1942 | |
| 1943 | spin_unlock(udc->lock); |
| 1944 | if (usb_ep_set_halt(&mEp->ep)) |
| 1945 | err("error: ep_set_halt"); |
| 1946 | spin_lock(udc->lock); |
| 1947 | } |
| 1948 | } |
| 1949 | } |
| 1950 | |
| 1951 | /****************************************************************************** |
| 1952 | * ENDPT block |
| 1953 | *****************************************************************************/ |
| 1954 | /** |
| 1955 | * ep_enable: configure endpoint, making it usable |
| 1956 | * |
| 1957 | * Check usb_ep_enable() at "usb_gadget.h" for details |
| 1958 | */ |
| 1959 | static int ep_enable(struct usb_ep *ep, |
| 1960 | const struct usb_endpoint_descriptor *desc) |
| 1961 | { |
| 1962 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 1963 | int direction, retval = 0; |
| 1964 | unsigned long flags; |
| 1965 | |
| 1966 | trace("%p, %p", ep, desc); |
| 1967 | |
| 1968 | if (ep == NULL || desc == NULL) |
| 1969 | return -EINVAL; |
| 1970 | |
| 1971 | spin_lock_irqsave(mEp->lock, flags); |
| 1972 | |
| 1973 | /* only internal SW should enable ctrl endpts */ |
| 1974 | |
| 1975 | mEp->desc = desc; |
| 1976 | |
| 1977 | if (!list_empty(&mEp->qh[mEp->dir].queue)) |
| 1978 | warn("enabling a non-empty endpoint!"); |
| 1979 | |
Matthias Kaehlcke | 15739bb | 2009-04-15 22:28:41 +0200 | [diff] [blame] | 1980 | mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; |
| 1981 | mEp->num = usb_endpoint_num(desc); |
| 1982 | mEp->type = usb_endpoint_type(desc); |
David Lopo | aa69a80 | 2008-11-17 14:14:51 -0800 | [diff] [blame] | 1983 | |
| 1984 | mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize); |
| 1985 | |
| 1986 | direction = mEp->dir; |
| 1987 | do { |
| 1988 | dbg_event(_usb_addr(mEp), "ENABLE", 0); |
| 1989 | |
David Lopo | f23e649 | 2009-04-16 14:35:24 -0700 | [diff] [blame] | 1990 | mEp->qh[mEp->dir].ptr->cap = 0; |
| 1991 | |
David Lopo | aa69a80 | 2008-11-17 14:14:51 -0800 | [diff] [blame] | 1992 | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) |
| 1993 | mEp->qh[mEp->dir].ptr->cap |= QH_IOS; |
| 1994 | else if (mEp->type == USB_ENDPOINT_XFER_ISOC) |
| 1995 | mEp->qh[mEp->dir].ptr->cap &= ~QH_MULT; |
| 1996 | else |
| 1997 | mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT; |
| 1998 | |
| 1999 | mEp->qh[mEp->dir].ptr->cap |= |
| 2000 | (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; |
| 2001 | mEp->qh[mEp->dir].ptr->td.next |= TD_TERMINATE; /* needed? */ |
| 2002 | |
| 2003 | retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); |
| 2004 | |
| 2005 | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) |
| 2006 | mEp->dir = (mEp->dir == TX) ? RX : TX; |
| 2007 | |
| 2008 | } while (mEp->dir != direction); |
| 2009 | |
| 2010 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2011 | return retval; |
| 2012 | } |
| 2013 | |
| 2014 | /** |
| 2015 | * ep_disable: endpoint is no longer usable |
| 2016 | * |
| 2017 | * Check usb_ep_disable() at "usb_gadget.h" for details |
| 2018 | */ |
| 2019 | static int ep_disable(struct usb_ep *ep) |
| 2020 | { |
| 2021 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 2022 | int direction, retval = 0; |
| 2023 | unsigned long flags; |
| 2024 | |
| 2025 | trace("%p", ep); |
| 2026 | |
| 2027 | if (ep == NULL) |
| 2028 | return -EINVAL; |
| 2029 | else if (mEp->desc == NULL) |
| 2030 | return -EBUSY; |
| 2031 | |
| 2032 | spin_lock_irqsave(mEp->lock, flags); |
| 2033 | |
| 2034 | /* only internal SW should disable ctrl endpts */ |
| 2035 | |
| 2036 | direction = mEp->dir; |
| 2037 | do { |
| 2038 | dbg_event(_usb_addr(mEp), "DISABLE", 0); |
| 2039 | |
| 2040 | retval |= _ep_nuke(mEp); |
| 2041 | retval |= hw_ep_disable(mEp->num, mEp->dir); |
| 2042 | |
| 2043 | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) |
| 2044 | mEp->dir = (mEp->dir == TX) ? RX : TX; |
| 2045 | |
| 2046 | } while (mEp->dir != direction); |
| 2047 | |
| 2048 | mEp->desc = NULL; |
| 2049 | |
| 2050 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2051 | return retval; |
| 2052 | } |
| 2053 | |
| 2054 | /** |
| 2055 | * ep_alloc_request: allocate a request object to use with this endpoint |
| 2056 | * |
| 2057 | * Check usb_ep_alloc_request() at "usb_gadget.h" for details |
| 2058 | */ |
| 2059 | static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) |
| 2060 | { |
| 2061 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 2062 | struct ci13xxx_req *mReq = NULL; |
| 2063 | unsigned long flags; |
| 2064 | |
| 2065 | trace("%p, %i", ep, gfp_flags); |
| 2066 | |
| 2067 | if (ep == NULL) { |
| 2068 | err("EINVAL"); |
| 2069 | return NULL; |
| 2070 | } |
| 2071 | |
| 2072 | spin_lock_irqsave(mEp->lock, flags); |
| 2073 | |
| 2074 | mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags); |
| 2075 | if (mReq != NULL) { |
| 2076 | INIT_LIST_HEAD(&mReq->queue); |
| 2077 | |
| 2078 | mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags, |
| 2079 | &mReq->dma); |
| 2080 | if (mReq->ptr == NULL) { |
| 2081 | kfree(mReq); |
| 2082 | mReq = NULL; |
| 2083 | } |
| 2084 | } |
| 2085 | |
| 2086 | dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL); |
| 2087 | |
| 2088 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2089 | |
| 2090 | return (mReq == NULL) ? NULL : &mReq->req; |
| 2091 | } |
| 2092 | |
| 2093 | /** |
| 2094 | * ep_free_request: frees a request object |
| 2095 | * |
| 2096 | * Check usb_ep_free_request() at "usb_gadget.h" for details |
| 2097 | */ |
| 2098 | static void ep_free_request(struct usb_ep *ep, struct usb_request *req) |
| 2099 | { |
| 2100 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 2101 | struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); |
| 2102 | unsigned long flags; |
| 2103 | |
| 2104 | trace("%p, %p", ep, req); |
| 2105 | |
| 2106 | if (ep == NULL || req == NULL) { |
| 2107 | err("EINVAL"); |
| 2108 | return; |
| 2109 | } else if (!list_empty(&mReq->queue)) { |
| 2110 | err("EBUSY"); |
| 2111 | return; |
| 2112 | } |
| 2113 | |
| 2114 | spin_lock_irqsave(mEp->lock, flags); |
| 2115 | |
| 2116 | if (mReq->ptr) |
| 2117 | dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma); |
| 2118 | kfree(mReq); |
| 2119 | |
| 2120 | dbg_event(_usb_addr(mEp), "FREE", 0); |
| 2121 | |
| 2122 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2123 | } |
| 2124 | |
| 2125 | /** |
| 2126 | * ep_queue: queues (submits) an I/O request to an endpoint |
| 2127 | * |
| 2128 | * Check usb_ep_queue()* at usb_gadget.h" for details |
| 2129 | */ |
| 2130 | static int ep_queue(struct usb_ep *ep, struct usb_request *req, |
| 2131 | gfp_t __maybe_unused gfp_flags) |
| 2132 | { |
| 2133 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 2134 | struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); |
| 2135 | int retval = 0; |
| 2136 | unsigned long flags; |
| 2137 | |
| 2138 | trace("%p, %p, %X", ep, req, gfp_flags); |
| 2139 | |
| 2140 | if (ep == NULL || req == NULL || mEp->desc == NULL) |
| 2141 | return -EINVAL; |
| 2142 | |
| 2143 | spin_lock_irqsave(mEp->lock, flags); |
| 2144 | |
| 2145 | if (mEp->type == USB_ENDPOINT_XFER_CONTROL && |
| 2146 | !list_empty(&mEp->qh[mEp->dir].queue)) { |
| 2147 | _ep_nuke(mEp); |
| 2148 | retval = -EOVERFLOW; |
| 2149 | warn("endpoint ctrl %X nuked", _usb_addr(mEp)); |
| 2150 | } |
| 2151 | |
| 2152 | /* first nuke then test link, e.g. previous status has not sent */ |
| 2153 | if (!list_empty(&mReq->queue)) { |
| 2154 | retval = -EBUSY; |
| 2155 | err("request already in queue"); |
| 2156 | goto done; |
| 2157 | } |
| 2158 | |
| 2159 | if (req->length > (4 * PAGE_SIZE)) { |
| 2160 | req->length = (4 * PAGE_SIZE); |
| 2161 | retval = -EMSGSIZE; |
| 2162 | warn("request length truncated"); |
| 2163 | } |
| 2164 | |
| 2165 | dbg_queue(_usb_addr(mEp), req, retval); |
| 2166 | |
| 2167 | /* push request */ |
| 2168 | mReq->req.status = -EINPROGRESS; |
| 2169 | mReq->req.actual = 0; |
| 2170 | list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue); |
| 2171 | |
| 2172 | retval = _hardware_enqueue(mEp, mReq); |
| 2173 | if (retval == -EALREADY || retval == -EBUSY) { |
| 2174 | dbg_event(_usb_addr(mEp), "QUEUE", retval); |
| 2175 | retval = 0; |
| 2176 | } |
| 2177 | |
| 2178 | done: |
| 2179 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2180 | return retval; |
| 2181 | } |
| 2182 | |
| 2183 | /** |
| 2184 | * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint |
| 2185 | * |
| 2186 | * Check usb_ep_dequeue() at "usb_gadget.h" for details |
| 2187 | */ |
| 2188 | static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) |
| 2189 | { |
| 2190 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 2191 | struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); |
| 2192 | unsigned long flags; |
| 2193 | |
| 2194 | trace("%p, %p", ep, req); |
| 2195 | |
| 2196 | if (ep == NULL || req == NULL || mEp->desc == NULL || |
| 2197 | list_empty(&mReq->queue) || list_empty(&mEp->qh[mEp->dir].queue)) |
| 2198 | return -EINVAL; |
| 2199 | |
| 2200 | spin_lock_irqsave(mEp->lock, flags); |
| 2201 | |
| 2202 | dbg_event(_usb_addr(mEp), "DEQUEUE", 0); |
| 2203 | |
| 2204 | if (mReq->req.status == -EALREADY) |
| 2205 | _hardware_dequeue(mEp, mReq); |
| 2206 | |
| 2207 | /* pop request */ |
| 2208 | list_del_init(&mReq->queue); |
| 2209 | req->status = -ECONNRESET; |
| 2210 | |
| 2211 | if (!mReq->req.no_interrupt && mReq->req.complete != NULL) { |
| 2212 | spin_unlock(mEp->lock); |
| 2213 | mReq->req.complete(&mEp->ep, &mReq->req); |
| 2214 | spin_lock(mEp->lock); |
| 2215 | } |
| 2216 | |
| 2217 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2218 | return 0; |
| 2219 | } |
| 2220 | |
| 2221 | /** |
| 2222 | * ep_set_halt: sets the endpoint halt feature |
| 2223 | * |
| 2224 | * Check usb_ep_set_halt() at "usb_gadget.h" for details |
| 2225 | */ |
| 2226 | static int ep_set_halt(struct usb_ep *ep, int value) |
| 2227 | { |
| 2228 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 2229 | int direction, retval = 0; |
| 2230 | unsigned long flags; |
| 2231 | |
| 2232 | trace("%p, %i", ep, value); |
| 2233 | |
| 2234 | if (ep == NULL || mEp->desc == NULL) |
| 2235 | return -EINVAL; |
| 2236 | |
| 2237 | spin_lock_irqsave(mEp->lock, flags); |
| 2238 | |
| 2239 | #ifndef STALL_IN |
| 2240 | /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ |
| 2241 | if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX && |
| 2242 | !list_empty(&mEp->qh[mEp->dir].queue)) { |
| 2243 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2244 | return -EAGAIN; |
| 2245 | } |
| 2246 | #endif |
| 2247 | |
| 2248 | direction = mEp->dir; |
| 2249 | do { |
| 2250 | dbg_event(_usb_addr(mEp), "HALT", value); |
| 2251 | retval |= hw_ep_set_halt(mEp->num, mEp->dir, value); |
| 2252 | |
| 2253 | if (!value) |
| 2254 | mEp->wedge = 0; |
| 2255 | |
| 2256 | if (mEp->type == USB_ENDPOINT_XFER_CONTROL) |
| 2257 | mEp->dir = (mEp->dir == TX) ? RX : TX; |
| 2258 | |
| 2259 | } while (mEp->dir != direction); |
| 2260 | |
| 2261 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2262 | return retval; |
| 2263 | } |
| 2264 | |
| 2265 | /** |
| 2266 | * ep_set_wedge: sets the halt feature and ignores clear requests |
| 2267 | * |
| 2268 | * Check usb_ep_set_wedge() at "usb_gadget.h" for details |
| 2269 | */ |
| 2270 | static int ep_set_wedge(struct usb_ep *ep) |
| 2271 | { |
| 2272 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 2273 | unsigned long flags; |
| 2274 | |
| 2275 | trace("%p", ep); |
| 2276 | |
| 2277 | if (ep == NULL || mEp->desc == NULL) |
| 2278 | return -EINVAL; |
| 2279 | |
| 2280 | spin_lock_irqsave(mEp->lock, flags); |
| 2281 | |
| 2282 | dbg_event(_usb_addr(mEp), "WEDGE", 0); |
| 2283 | mEp->wedge = 1; |
| 2284 | |
| 2285 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2286 | |
| 2287 | return usb_ep_set_halt(ep); |
| 2288 | } |
| 2289 | |
| 2290 | /** |
| 2291 | * ep_fifo_flush: flushes contents of a fifo |
| 2292 | * |
| 2293 | * Check usb_ep_fifo_flush() at "usb_gadget.h" for details |
| 2294 | */ |
| 2295 | static void ep_fifo_flush(struct usb_ep *ep) |
| 2296 | { |
| 2297 | struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); |
| 2298 | unsigned long flags; |
| 2299 | |
| 2300 | trace("%p", ep); |
| 2301 | |
| 2302 | if (ep == NULL) { |
| 2303 | err("%02X: -EINVAL", _usb_addr(mEp)); |
| 2304 | return; |
| 2305 | } |
| 2306 | |
| 2307 | spin_lock_irqsave(mEp->lock, flags); |
| 2308 | |
| 2309 | dbg_event(_usb_addr(mEp), "FFLUSH", 0); |
| 2310 | hw_ep_flush(mEp->num, mEp->dir); |
| 2311 | |
| 2312 | spin_unlock_irqrestore(mEp->lock, flags); |
| 2313 | } |
| 2314 | |
| 2315 | /** |
| 2316 | * Endpoint-specific part of the API to the USB controller hardware |
| 2317 | * Check "usb_gadget.h" for details |
| 2318 | */ |
| 2319 | static const struct usb_ep_ops usb_ep_ops = { |
| 2320 | .enable = ep_enable, |
| 2321 | .disable = ep_disable, |
| 2322 | .alloc_request = ep_alloc_request, |
| 2323 | .free_request = ep_free_request, |
| 2324 | .queue = ep_queue, |
| 2325 | .dequeue = ep_dequeue, |
| 2326 | .set_halt = ep_set_halt, |
| 2327 | .set_wedge = ep_set_wedge, |
| 2328 | .fifo_flush = ep_fifo_flush, |
| 2329 | }; |
| 2330 | |
| 2331 | /****************************************************************************** |
| 2332 | * GADGET block |
| 2333 | *****************************************************************************/ |
| 2334 | /** |
| 2335 | * Device operations part of the API to the USB controller hardware, |
| 2336 | * which don't involve endpoints (or i/o) |
| 2337 | * Check "usb_gadget.h" for details |
| 2338 | */ |
| 2339 | static const struct usb_gadget_ops usb_gadget_ops; |
| 2340 | |
| 2341 | /** |
| 2342 | * usb_gadget_register_driver: register a gadget driver |
| 2343 | * |
| 2344 | * Check usb_gadget_register_driver() at "usb_gadget.h" for details |
| 2345 | * Interrupts are enabled here |
| 2346 | */ |
| 2347 | int usb_gadget_register_driver(struct usb_gadget_driver *driver) |
| 2348 | { |
| 2349 | struct ci13xxx *udc = _udc; |
| 2350 | unsigned long i, k, flags; |
| 2351 | int retval = -ENOMEM; |
| 2352 | |
| 2353 | trace("%p", driver); |
| 2354 | |
| 2355 | if (driver == NULL || |
| 2356 | driver->bind == NULL || |
| 2357 | driver->unbind == NULL || |
| 2358 | driver->setup == NULL || |
| 2359 | driver->disconnect == NULL || |
| 2360 | driver->suspend == NULL || |
| 2361 | driver->resume == NULL) |
| 2362 | return -EINVAL; |
| 2363 | else if (udc == NULL) |
| 2364 | return -ENODEV; |
| 2365 | else if (udc->driver != NULL) |
| 2366 | return -EBUSY; |
| 2367 | |
| 2368 | /* alloc resources */ |
| 2369 | udc->qh_pool = dma_pool_create("ci13xxx_qh", &udc->gadget.dev, |
| 2370 | sizeof(struct ci13xxx_qh), |
| 2371 | 64, PAGE_SIZE); |
| 2372 | if (udc->qh_pool == NULL) |
| 2373 | return -ENOMEM; |
| 2374 | |
| 2375 | udc->td_pool = dma_pool_create("ci13xxx_td", &udc->gadget.dev, |
| 2376 | sizeof(struct ci13xxx_td), |
| 2377 | 64, PAGE_SIZE); |
| 2378 | if (udc->td_pool == NULL) { |
| 2379 | dma_pool_destroy(udc->qh_pool); |
| 2380 | udc->qh_pool = NULL; |
| 2381 | return -ENOMEM; |
| 2382 | } |
| 2383 | |
| 2384 | spin_lock_irqsave(udc->lock, flags); |
| 2385 | |
| 2386 | info("hw_ep_max = %d", hw_ep_max); |
| 2387 | |
| 2388 | udc->driver = driver; |
| 2389 | udc->gadget.ops = NULL; |
| 2390 | udc->gadget.dev.driver = NULL; |
| 2391 | |
| 2392 | retval = 0; |
| 2393 | for (i = 0; i < hw_ep_max; i++) { |
| 2394 | struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; |
| 2395 | |
| 2396 | scnprintf(mEp->name, sizeof(mEp->name), "ep%i", (int)i); |
| 2397 | |
| 2398 | mEp->lock = udc->lock; |
| 2399 | mEp->device = &udc->gadget.dev; |
| 2400 | mEp->td_pool = udc->td_pool; |
| 2401 | |
| 2402 | mEp->ep.name = mEp->name; |
| 2403 | mEp->ep.ops = &usb_ep_ops; |
| 2404 | mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; |
| 2405 | |
| 2406 | /* this allocation cannot be random */ |
| 2407 | for (k = RX; k <= TX; k++) { |
| 2408 | INIT_LIST_HEAD(&mEp->qh[k].queue); |
| 2409 | mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool, |
| 2410 | GFP_KERNEL, |
| 2411 | &mEp->qh[k].dma); |
| 2412 | if (mEp->qh[k].ptr == NULL) |
| 2413 | retval = -ENOMEM; |
| 2414 | else |
| 2415 | memset(mEp->qh[k].ptr, 0, |
| 2416 | sizeof(*mEp->qh[k].ptr)); |
| 2417 | } |
| 2418 | if (i == 0) |
| 2419 | udc->gadget.ep0 = &mEp->ep; |
| 2420 | else |
| 2421 | list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); |
| 2422 | } |
| 2423 | if (retval) |
| 2424 | goto done; |
| 2425 | |
| 2426 | /* bind gadget */ |
| 2427 | driver->driver.bus = NULL; |
| 2428 | udc->gadget.ops = &usb_gadget_ops; |
| 2429 | udc->gadget.dev.driver = &driver->driver; |
| 2430 | |
| 2431 | spin_unlock_irqrestore(udc->lock, flags); |
| 2432 | retval = driver->bind(&udc->gadget); /* MAY SLEEP */ |
| 2433 | spin_lock_irqsave(udc->lock, flags); |
| 2434 | |
| 2435 | if (retval) { |
| 2436 | udc->gadget.ops = NULL; |
| 2437 | udc->gadget.dev.driver = NULL; |
| 2438 | goto done; |
| 2439 | } |
| 2440 | |
| 2441 | retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma); |
| 2442 | |
| 2443 | done: |
| 2444 | spin_unlock_irqrestore(udc->lock, flags); |
| 2445 | if (retval) |
| 2446 | usb_gadget_unregister_driver(driver); |
| 2447 | return retval; |
| 2448 | } |
| 2449 | EXPORT_SYMBOL(usb_gadget_register_driver); |
| 2450 | |
| 2451 | /** |
| 2452 | * usb_gadget_unregister_driver: unregister a gadget driver |
| 2453 | * |
| 2454 | * Check usb_gadget_unregister_driver() at "usb_gadget.h" for details |
| 2455 | */ |
| 2456 | int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| 2457 | { |
| 2458 | struct ci13xxx *udc = _udc; |
| 2459 | unsigned long i, k, flags; |
| 2460 | |
| 2461 | trace("%p", driver); |
| 2462 | |
| 2463 | if (driver == NULL || |
| 2464 | driver->bind == NULL || |
| 2465 | driver->unbind == NULL || |
| 2466 | driver->setup == NULL || |
| 2467 | driver->disconnect == NULL || |
| 2468 | driver->suspend == NULL || |
| 2469 | driver->resume == NULL || |
| 2470 | driver != udc->driver) |
| 2471 | return -EINVAL; |
| 2472 | |
| 2473 | spin_lock_irqsave(udc->lock, flags); |
| 2474 | |
| 2475 | hw_device_state(0); |
| 2476 | |
| 2477 | /* unbind gadget */ |
| 2478 | if (udc->gadget.ops != NULL) { |
| 2479 | _gadget_stop_activity(&udc->gadget); |
| 2480 | |
| 2481 | spin_unlock_irqrestore(udc->lock, flags); |
| 2482 | driver->unbind(&udc->gadget); /* MAY SLEEP */ |
| 2483 | spin_lock_irqsave(udc->lock, flags); |
| 2484 | |
| 2485 | udc->gadget.ops = NULL; |
| 2486 | udc->gadget.dev.driver = NULL; |
| 2487 | } |
| 2488 | |
| 2489 | /* free resources */ |
| 2490 | for (i = 0; i < hw_ep_max; i++) { |
| 2491 | struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; |
| 2492 | |
| 2493 | if (i == 0) |
| 2494 | udc->gadget.ep0 = NULL; |
| 2495 | else if (!list_empty(&mEp->ep.ep_list)) |
| 2496 | list_del_init(&mEp->ep.ep_list); |
| 2497 | |
| 2498 | for (k = RX; k <= TX; k++) |
| 2499 | if (mEp->qh[k].ptr != NULL) |
| 2500 | dma_pool_free(udc->qh_pool, |
| 2501 | mEp->qh[k].ptr, mEp->qh[k].dma); |
| 2502 | } |
| 2503 | |
| 2504 | udc->driver = NULL; |
| 2505 | |
| 2506 | spin_unlock_irqrestore(udc->lock, flags); |
| 2507 | |
| 2508 | if (udc->td_pool != NULL) { |
| 2509 | dma_pool_destroy(udc->td_pool); |
| 2510 | udc->td_pool = NULL; |
| 2511 | } |
| 2512 | if (udc->qh_pool != NULL) { |
| 2513 | dma_pool_destroy(udc->qh_pool); |
| 2514 | udc->qh_pool = NULL; |
| 2515 | } |
| 2516 | |
| 2517 | return 0; |
| 2518 | } |
| 2519 | EXPORT_SYMBOL(usb_gadget_unregister_driver); |
| 2520 | |
| 2521 | /****************************************************************************** |
| 2522 | * BUS block |
| 2523 | *****************************************************************************/ |
| 2524 | /** |
| 2525 | * udc_irq: global interrupt handler |
| 2526 | * |
| 2527 | * This function returns IRQ_HANDLED if the IRQ has been handled |
| 2528 | * It locks access to registers |
| 2529 | */ |
| 2530 | static irqreturn_t udc_irq(void) |
| 2531 | { |
| 2532 | struct ci13xxx *udc = _udc; |
| 2533 | irqreturn_t retval; |
| 2534 | u32 intr; |
| 2535 | |
| 2536 | trace(); |
| 2537 | |
| 2538 | if (udc == NULL) { |
| 2539 | err("ENODEV"); |
| 2540 | return IRQ_HANDLED; |
| 2541 | } |
| 2542 | |
| 2543 | spin_lock(udc->lock); |
| 2544 | intr = hw_test_and_clear_intr_active(); |
| 2545 | if (intr) { |
| 2546 | isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr; |
| 2547 | isr_statistics.hndl.idx &= ISR_MASK; |
| 2548 | isr_statistics.hndl.cnt++; |
| 2549 | |
| 2550 | /* order defines priority - do NOT change it */ |
| 2551 | if (USBi_URI & intr) { |
| 2552 | isr_statistics.uri++; |
| 2553 | isr_reset_handler(udc); |
| 2554 | } |
| 2555 | if (USBi_PCI & intr) { |
| 2556 | isr_statistics.pci++; |
| 2557 | udc->gadget.speed = hw_port_is_high_speed() ? |
| 2558 | USB_SPEED_HIGH : USB_SPEED_FULL; |
| 2559 | } |
| 2560 | if (USBi_UEI & intr) |
| 2561 | isr_statistics.uei++; |
| 2562 | if (USBi_UI & intr) { |
| 2563 | isr_statistics.ui++; |
| 2564 | isr_tr_complete_handler(udc); |
| 2565 | } |
| 2566 | if (USBi_SLI & intr) |
| 2567 | isr_statistics.sli++; |
| 2568 | retval = IRQ_HANDLED; |
| 2569 | } else { |
| 2570 | isr_statistics.none++; |
| 2571 | retval = IRQ_NONE; |
| 2572 | } |
| 2573 | spin_unlock(udc->lock); |
| 2574 | |
| 2575 | return retval; |
| 2576 | } |
| 2577 | |
| 2578 | /** |
| 2579 | * udc_release: driver release function |
| 2580 | * @dev: device |
| 2581 | * |
| 2582 | * Currently does nothing |
| 2583 | */ |
| 2584 | static void udc_release(struct device *dev) |
| 2585 | { |
| 2586 | trace("%p", dev); |
| 2587 | |
| 2588 | if (dev == NULL) |
| 2589 | err("EINVAL"); |
| 2590 | } |
| 2591 | |
| 2592 | /** |
| 2593 | * udc_probe: parent probe must call this to initialize UDC |
| 2594 | * @dev: parent device |
| 2595 | * @regs: registers base address |
| 2596 | * @name: driver name |
| 2597 | * |
| 2598 | * This function returns an error code |
| 2599 | * No interrupts active, the IRQ has not been requested yet |
| 2600 | * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask |
| 2601 | */ |
| 2602 | static int udc_probe(struct device *dev, void __iomem *regs, const char *name) |
| 2603 | { |
| 2604 | struct ci13xxx *udc; |
| 2605 | int retval = 0; |
| 2606 | |
| 2607 | trace("%p, %p, %p", dev, regs, name); |
| 2608 | |
| 2609 | if (dev == NULL || regs == NULL || name == NULL) |
| 2610 | return -EINVAL; |
| 2611 | |
| 2612 | udc = kzalloc(sizeof(struct ci13xxx), GFP_KERNEL); |
| 2613 | if (udc == NULL) |
| 2614 | return -ENOMEM; |
| 2615 | |
| 2616 | udc->lock = &udc_lock; |
| 2617 | |
| 2618 | retval = hw_device_reset(regs); |
| 2619 | if (retval) |
| 2620 | goto done; |
| 2621 | |
| 2622 | udc->gadget.ops = NULL; |
| 2623 | udc->gadget.speed = USB_SPEED_UNKNOWN; |
| 2624 | udc->gadget.is_dualspeed = 1; |
| 2625 | udc->gadget.is_otg = 0; |
| 2626 | udc->gadget.name = name; |
| 2627 | |
| 2628 | INIT_LIST_HEAD(&udc->gadget.ep_list); |
| 2629 | udc->gadget.ep0 = NULL; |
| 2630 | |
Kay Sievers | 5df5852 | 2009-03-24 16:38:23 -0700 | [diff] [blame] | 2631 | dev_set_name(&udc->gadget.dev, "gadget"); |
David Lopo | aa69a80 | 2008-11-17 14:14:51 -0800 | [diff] [blame] | 2632 | udc->gadget.dev.dma_mask = dev->dma_mask; |
| 2633 | udc->gadget.dev.parent = dev; |
| 2634 | udc->gadget.dev.release = udc_release; |
| 2635 | |
| 2636 | retval = device_register(&udc->gadget.dev); |
| 2637 | if (retval) |
| 2638 | goto done; |
| 2639 | |
| 2640 | #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| 2641 | retval = dbg_create_files(&udc->gadget.dev); |
| 2642 | #endif |
| 2643 | if (retval) { |
| 2644 | device_unregister(&udc->gadget.dev); |
| 2645 | goto done; |
| 2646 | } |
| 2647 | |
| 2648 | _udc = udc; |
| 2649 | return retval; |
| 2650 | |
| 2651 | done: |
| 2652 | err("error = %i", retval); |
| 2653 | kfree(udc); |
| 2654 | _udc = NULL; |
| 2655 | return retval; |
| 2656 | } |
| 2657 | |
| 2658 | /** |
| 2659 | * udc_remove: parent remove must call this to remove UDC |
| 2660 | * |
| 2661 | * No interrupts active, the IRQ has been released |
| 2662 | */ |
| 2663 | static void udc_remove(void) |
| 2664 | { |
| 2665 | struct ci13xxx *udc = _udc; |
| 2666 | |
| 2667 | if (udc == NULL) { |
| 2668 | err("EINVAL"); |
| 2669 | return; |
| 2670 | } |
| 2671 | |
| 2672 | #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| 2673 | dbg_remove_files(&udc->gadget.dev); |
| 2674 | #endif |
| 2675 | device_unregister(&udc->gadget.dev); |
| 2676 | |
| 2677 | kfree(udc); |
| 2678 | _udc = NULL; |
| 2679 | } |
| 2680 | |
| 2681 | /****************************************************************************** |
| 2682 | * PCI block |
| 2683 | *****************************************************************************/ |
| 2684 | /** |
| 2685 | * ci13xxx_pci_irq: interrut handler |
| 2686 | * @irq: irq number |
| 2687 | * @pdev: USB Device Controller interrupt source |
| 2688 | * |
| 2689 | * This function returns IRQ_HANDLED if the IRQ has been handled |
| 2690 | * This is an ISR don't trace, use attribute interface instead |
| 2691 | */ |
| 2692 | static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev) |
| 2693 | { |
| 2694 | if (irq == 0) { |
| 2695 | dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!"); |
| 2696 | return IRQ_HANDLED; |
| 2697 | } |
| 2698 | return udc_irq(); |
| 2699 | } |
| 2700 | |
| 2701 | /** |
| 2702 | * ci13xxx_pci_probe: PCI probe |
| 2703 | * @pdev: USB device controller being probed |
| 2704 | * @id: PCI hotplug ID connecting controller to UDC framework |
| 2705 | * |
| 2706 | * This function returns an error code |
| 2707 | * Allocates basic PCI resources for this USB device controller, and then |
| 2708 | * invokes the udc_probe() method to start the UDC associated with it |
| 2709 | */ |
| 2710 | static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, |
| 2711 | const struct pci_device_id *id) |
| 2712 | { |
| 2713 | void __iomem *regs = NULL; |
| 2714 | int retval = 0; |
| 2715 | |
| 2716 | if (id == NULL) |
| 2717 | return -EINVAL; |
| 2718 | |
| 2719 | retval = pci_enable_device(pdev); |
| 2720 | if (retval) |
| 2721 | goto done; |
| 2722 | |
| 2723 | if (!pdev->irq) { |
| 2724 | dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!"); |
| 2725 | retval = -ENODEV; |
| 2726 | goto disable_device; |
| 2727 | } |
| 2728 | |
| 2729 | retval = pci_request_regions(pdev, UDC_DRIVER_NAME); |
| 2730 | if (retval) |
| 2731 | goto disable_device; |
| 2732 | |
| 2733 | /* BAR 0 holds all the registers */ |
| 2734 | regs = pci_iomap(pdev, 0, 0); |
| 2735 | if (!regs) { |
| 2736 | dev_err(&pdev->dev, "Error mapping memory!"); |
| 2737 | retval = -EFAULT; |
| 2738 | goto release_regions; |
| 2739 | } |
| 2740 | pci_set_drvdata(pdev, (__force void *)regs); |
| 2741 | |
| 2742 | pci_set_master(pdev); |
| 2743 | pci_try_set_mwi(pdev); |
| 2744 | |
| 2745 | retval = udc_probe(&pdev->dev, regs, UDC_DRIVER_NAME); |
| 2746 | if (retval) |
| 2747 | goto iounmap; |
| 2748 | |
| 2749 | /* our device does not have MSI capability */ |
| 2750 | |
| 2751 | retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED, |
| 2752 | UDC_DRIVER_NAME, pdev); |
| 2753 | if (retval) |
| 2754 | goto gadget_remove; |
| 2755 | |
| 2756 | return 0; |
| 2757 | |
| 2758 | gadget_remove: |
| 2759 | udc_remove(); |
| 2760 | iounmap: |
| 2761 | pci_iounmap(pdev, regs); |
| 2762 | release_regions: |
| 2763 | pci_release_regions(pdev); |
| 2764 | disable_device: |
| 2765 | pci_disable_device(pdev); |
| 2766 | done: |
| 2767 | return retval; |
| 2768 | } |
| 2769 | |
| 2770 | /** |
| 2771 | * ci13xxx_pci_remove: PCI remove |
| 2772 | * @pdev: USB Device Controller being removed |
| 2773 | * |
| 2774 | * Reverses the effect of ci13xxx_pci_probe(), |
| 2775 | * first invoking the udc_remove() and then releases |
| 2776 | * all PCI resources allocated for this USB device controller |
| 2777 | */ |
| 2778 | static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev) |
| 2779 | { |
| 2780 | free_irq(pdev->irq, pdev); |
| 2781 | udc_remove(); |
| 2782 | pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev)); |
| 2783 | pci_release_regions(pdev); |
| 2784 | pci_disable_device(pdev); |
| 2785 | } |
| 2786 | |
| 2787 | /** |
| 2788 | * PCI device table |
| 2789 | * PCI device structure |
| 2790 | * |
| 2791 | * Check "pci.h" for details |
| 2792 | */ |
| 2793 | static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = { |
| 2794 | { PCI_DEVICE(0x153F, 0x1004) }, |
| 2795 | { PCI_DEVICE(0x153F, 0x1006) }, |
| 2796 | { 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ } |
| 2797 | }; |
| 2798 | MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table); |
| 2799 | |
| 2800 | static struct pci_driver ci13xxx_pci_driver = { |
| 2801 | .name = UDC_DRIVER_NAME, |
| 2802 | .id_table = ci13xxx_pci_id_table, |
| 2803 | .probe = ci13xxx_pci_probe, |
| 2804 | .remove = __devexit_p(ci13xxx_pci_remove), |
| 2805 | }; |
| 2806 | |
| 2807 | /** |
| 2808 | * ci13xxx_pci_init: module init |
| 2809 | * |
| 2810 | * Driver load |
| 2811 | */ |
| 2812 | static int __init ci13xxx_pci_init(void) |
| 2813 | { |
| 2814 | return pci_register_driver(&ci13xxx_pci_driver); |
| 2815 | } |
| 2816 | module_init(ci13xxx_pci_init); |
| 2817 | |
| 2818 | /** |
| 2819 | * ci13xxx_pci_exit: module exit |
| 2820 | * |
| 2821 | * Driver unload |
| 2822 | */ |
| 2823 | static void __exit ci13xxx_pci_exit(void) |
| 2824 | { |
| 2825 | pci_unregister_driver(&ci13xxx_pci_driver); |
| 2826 | } |
| 2827 | module_exit(ci13xxx_pci_exit); |
| 2828 | |
| 2829 | MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>"); |
| 2830 | MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller"); |
| 2831 | MODULE_LICENSE("GPL"); |
| 2832 | MODULE_VERSION("June 2008"); |