Francisco Jerez | e190bfe | 2010-07-22 17:06:18 +0200 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright (C) 2010 Francisco Jerez. |
| 3 | * All Rights Reserved. |
| 4 | * |
| 5 | * Permission is hereby granted, free of charge, to any person obtaining |
| 6 | * a copy of this software and associated documentation files (the |
| 7 | * "Software"), to deal in the Software without restriction, including |
| 8 | * without limitation the rights to use, copy, modify, merge, publish, |
| 9 | * distribute, sublicense, and/or sell copies of the Software, and to |
| 10 | * permit persons to whom the Software is furnished to do so, subject to |
| 11 | * the following conditions: |
| 12 | * |
| 13 | * The above copyright notice and this permission notice (including the |
| 14 | * next paragraph) shall be included in all copies or substantial |
| 15 | * portions of the Software. |
| 16 | * |
| 17 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 18 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| 19 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| 20 | * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE |
| 21 | * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
| 22 | * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| 23 | * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| 24 | * |
| 25 | */ |
| 26 | |
| 27 | #include "drmP.h" |
| 28 | #include "drm_crtc_helper.h" |
| 29 | #include "drm_encoder_slave.h" |
| 30 | #include "i2c/sil164.h" |
| 31 | |
| 32 | struct sil164_priv { |
| 33 | struct sil164_encoder_params config; |
| 34 | struct i2c_client *duallink_slave; |
| 35 | |
| 36 | uint8_t saved_state[0x10]; |
| 37 | uint8_t saved_slave_state[0x10]; |
| 38 | }; |
| 39 | |
| 40 | #define to_sil164_priv(x) \ |
| 41 | ((struct sil164_priv *)to_encoder_slave(x)->slave_priv) |
| 42 | |
| 43 | #define sil164_dbg(client, format, ...) do { \ |
| 44 | if (drm_debug & DRM_UT_KMS) \ |
| 45 | dev_printk(KERN_DEBUG, &client->dev, \ |
| 46 | "%s: " format, __func__, ## __VA_ARGS__); \ |
| 47 | } while (0) |
| 48 | #define sil164_info(client, format, ...) \ |
| 49 | dev_info(&client->dev, format, __VA_ARGS__) |
| 50 | #define sil164_err(client, format, ...) \ |
| 51 | dev_err(&client->dev, format, __VA_ARGS__) |
| 52 | |
| 53 | #define SIL164_I2C_ADDR_MASTER 0x38 |
| 54 | #define SIL164_I2C_ADDR_SLAVE 0x39 |
| 55 | |
| 56 | /* HW register definitions */ |
| 57 | |
| 58 | #define SIL164_VENDOR_LO 0x0 |
| 59 | #define SIL164_VENDOR_HI 0x1 |
| 60 | #define SIL164_DEVICE_LO 0x2 |
| 61 | #define SIL164_DEVICE_HI 0x3 |
| 62 | #define SIL164_REVISION 0x4 |
| 63 | #define SIL164_FREQ_MIN 0x6 |
| 64 | #define SIL164_FREQ_MAX 0x7 |
| 65 | #define SIL164_CONTROL0 0x8 |
| 66 | # define SIL164_CONTROL0_POWER_ON 0x01 |
| 67 | # define SIL164_CONTROL0_EDGE_RISING 0x02 |
| 68 | # define SIL164_CONTROL0_INPUT_24BIT 0x04 |
| 69 | # define SIL164_CONTROL0_DUAL_EDGE 0x08 |
| 70 | # define SIL164_CONTROL0_HSYNC_ON 0x10 |
| 71 | # define SIL164_CONTROL0_VSYNC_ON 0x20 |
| 72 | #define SIL164_DETECT 0x9 |
| 73 | # define SIL164_DETECT_INTR_STAT 0x01 |
| 74 | # define SIL164_DETECT_HOTPLUG_STAT 0x02 |
| 75 | # define SIL164_DETECT_RECEIVER_STAT 0x04 |
| 76 | # define SIL164_DETECT_INTR_MODE_RECEIVER 0x00 |
| 77 | # define SIL164_DETECT_INTR_MODE_HOTPLUG 0x08 |
| 78 | # define SIL164_DETECT_OUT_MODE_HIGH 0x00 |
| 79 | # define SIL164_DETECT_OUT_MODE_INTR 0x10 |
| 80 | # define SIL164_DETECT_OUT_MODE_RECEIVER 0x20 |
| 81 | # define SIL164_DETECT_OUT_MODE_HOTPLUG 0x30 |
| 82 | # define SIL164_DETECT_VSWING_STAT 0x80 |
| 83 | #define SIL164_CONTROL1 0xa |
| 84 | # define SIL164_CONTROL1_DESKEW_ENABLE 0x10 |
| 85 | # define SIL164_CONTROL1_DESKEW_INCR_SHIFT 5 |
| 86 | #define SIL164_GPIO 0xb |
| 87 | #define SIL164_CONTROL2 0xc |
| 88 | # define SIL164_CONTROL2_FILTER_ENABLE 0x01 |
| 89 | # define SIL164_CONTROL2_FILTER_SETTING_SHIFT 1 |
| 90 | # define SIL164_CONTROL2_DUALLINK_MASTER 0x40 |
| 91 | # define SIL164_CONTROL2_SYNC_CONT 0x80 |
| 92 | #define SIL164_DUALLINK 0xd |
| 93 | # define SIL164_DUALLINK_ENABLE 0x10 |
| 94 | # define SIL164_DUALLINK_SKEW_SHIFT 5 |
| 95 | #define SIL164_PLLZONE 0xe |
| 96 | # define SIL164_PLLZONE_STAT 0x08 |
| 97 | # define SIL164_PLLZONE_FORCE_ON 0x10 |
| 98 | # define SIL164_PLLZONE_FORCE_HIGH 0x20 |
| 99 | |
| 100 | /* HW access functions */ |
| 101 | |
| 102 | static void |
| 103 | sil164_write(struct i2c_client *client, uint8_t addr, uint8_t val) |
| 104 | { |
| 105 | uint8_t buf[] = {addr, val}; |
| 106 | int ret; |
| 107 | |
| 108 | ret = i2c_master_send(client, buf, ARRAY_SIZE(buf)); |
| 109 | if (ret < 0) |
| 110 | sil164_err(client, "Error %d writing to subaddress 0x%x\n", |
| 111 | ret, addr); |
| 112 | } |
| 113 | |
| 114 | static uint8_t |
| 115 | sil164_read(struct i2c_client *client, uint8_t addr) |
| 116 | { |
| 117 | uint8_t val; |
| 118 | int ret; |
| 119 | |
| 120 | ret = i2c_master_send(client, &addr, sizeof(addr)); |
| 121 | if (ret < 0) |
| 122 | goto fail; |
| 123 | |
| 124 | ret = i2c_master_recv(client, &val, sizeof(val)); |
| 125 | if (ret < 0) |
| 126 | goto fail; |
| 127 | |
| 128 | return val; |
| 129 | |
| 130 | fail: |
| 131 | sil164_err(client, "Error %d reading from subaddress 0x%x\n", |
| 132 | ret, addr); |
| 133 | return 0; |
| 134 | } |
| 135 | |
| 136 | static void |
| 137 | sil164_save_state(struct i2c_client *client, uint8_t *state) |
| 138 | { |
| 139 | int i; |
| 140 | |
| 141 | for (i = 0x8; i <= 0xe; i++) |
| 142 | state[i] = sil164_read(client, i); |
| 143 | } |
| 144 | |
| 145 | static void |
| 146 | sil164_restore_state(struct i2c_client *client, uint8_t *state) |
| 147 | { |
| 148 | int i; |
| 149 | |
| 150 | for (i = 0x8; i <= 0xe; i++) |
| 151 | sil164_write(client, i, state[i]); |
| 152 | } |
| 153 | |
| 154 | static void |
| 155 | sil164_set_power_state(struct i2c_client *client, bool on) |
| 156 | { |
| 157 | uint8_t control0 = sil164_read(client, SIL164_CONTROL0); |
| 158 | |
| 159 | if (on) |
| 160 | control0 |= SIL164_CONTROL0_POWER_ON; |
| 161 | else |
| 162 | control0 &= ~SIL164_CONTROL0_POWER_ON; |
| 163 | |
| 164 | sil164_write(client, SIL164_CONTROL0, control0); |
| 165 | } |
| 166 | |
| 167 | static void |
| 168 | sil164_init_state(struct i2c_client *client, |
| 169 | struct sil164_encoder_params *config, |
| 170 | bool duallink) |
| 171 | { |
| 172 | sil164_write(client, SIL164_CONTROL0, |
| 173 | SIL164_CONTROL0_HSYNC_ON | |
| 174 | SIL164_CONTROL0_VSYNC_ON | |
| 175 | (config->input_edge ? SIL164_CONTROL0_EDGE_RISING : 0) | |
| 176 | (config->input_width ? SIL164_CONTROL0_INPUT_24BIT : 0) | |
| 177 | (config->input_dual ? SIL164_CONTROL0_DUAL_EDGE : 0)); |
| 178 | |
| 179 | sil164_write(client, SIL164_DETECT, |
| 180 | SIL164_DETECT_INTR_STAT | |
| 181 | SIL164_DETECT_OUT_MODE_RECEIVER); |
| 182 | |
| 183 | sil164_write(client, SIL164_CONTROL1, |
| 184 | (config->input_skew ? SIL164_CONTROL1_DESKEW_ENABLE : 0) | |
| 185 | (((config->input_skew + 4) & 0x7) |
| 186 | << SIL164_CONTROL1_DESKEW_INCR_SHIFT)); |
| 187 | |
| 188 | sil164_write(client, SIL164_CONTROL2, |
| 189 | SIL164_CONTROL2_SYNC_CONT | |
| 190 | (config->pll_filter ? 0 : SIL164_CONTROL2_FILTER_ENABLE) | |
| 191 | (4 << SIL164_CONTROL2_FILTER_SETTING_SHIFT)); |
| 192 | |
| 193 | sil164_write(client, SIL164_PLLZONE, 0); |
| 194 | |
| 195 | if (duallink) |
| 196 | sil164_write(client, SIL164_DUALLINK, |
| 197 | SIL164_DUALLINK_ENABLE | |
| 198 | (((config->duallink_skew + 4) & 0x7) |
| 199 | << SIL164_DUALLINK_SKEW_SHIFT)); |
| 200 | else |
| 201 | sil164_write(client, SIL164_DUALLINK, 0); |
| 202 | } |
| 203 | |
| 204 | /* DRM encoder functions */ |
| 205 | |
| 206 | static void |
| 207 | sil164_encoder_set_config(struct drm_encoder *encoder, void *params) |
| 208 | { |
| 209 | struct sil164_priv *priv = to_sil164_priv(encoder); |
| 210 | |
| 211 | priv->config = *(struct sil164_encoder_params *)params; |
| 212 | } |
| 213 | |
| 214 | static void |
| 215 | sil164_encoder_dpms(struct drm_encoder *encoder, int mode) |
| 216 | { |
| 217 | struct sil164_priv *priv = to_sil164_priv(encoder); |
| 218 | bool on = (mode == DRM_MODE_DPMS_ON); |
| 219 | bool duallink = (on && encoder->crtc->mode.clock > 165000); |
| 220 | |
| 221 | sil164_set_power_state(drm_i2c_encoder_get_client(encoder), on); |
| 222 | |
| 223 | if (priv->duallink_slave) |
| 224 | sil164_set_power_state(priv->duallink_slave, duallink); |
| 225 | } |
| 226 | |
| 227 | static void |
| 228 | sil164_encoder_save(struct drm_encoder *encoder) |
| 229 | { |
| 230 | struct sil164_priv *priv = to_sil164_priv(encoder); |
| 231 | |
| 232 | sil164_save_state(drm_i2c_encoder_get_client(encoder), |
| 233 | priv->saved_state); |
| 234 | |
| 235 | if (priv->duallink_slave) |
| 236 | sil164_save_state(priv->duallink_slave, |
| 237 | priv->saved_slave_state); |
| 238 | } |
| 239 | |
| 240 | static void |
| 241 | sil164_encoder_restore(struct drm_encoder *encoder) |
| 242 | { |
| 243 | struct sil164_priv *priv = to_sil164_priv(encoder); |
| 244 | |
| 245 | sil164_restore_state(drm_i2c_encoder_get_client(encoder), |
| 246 | priv->saved_state); |
| 247 | |
| 248 | if (priv->duallink_slave) |
| 249 | sil164_restore_state(priv->duallink_slave, |
| 250 | priv->saved_slave_state); |
| 251 | } |
| 252 | |
| 253 | static bool |
| 254 | sil164_encoder_mode_fixup(struct drm_encoder *encoder, |
| 255 | struct drm_display_mode *mode, |
| 256 | struct drm_display_mode *adjusted_mode) |
| 257 | { |
| 258 | return true; |
| 259 | } |
| 260 | |
| 261 | static int |
| 262 | sil164_encoder_mode_valid(struct drm_encoder *encoder, |
| 263 | struct drm_display_mode *mode) |
| 264 | { |
| 265 | struct sil164_priv *priv = to_sil164_priv(encoder); |
| 266 | |
| 267 | if (mode->clock < 32000) |
| 268 | return MODE_CLOCK_LOW; |
| 269 | |
| 270 | if (mode->clock > 330000 || |
| 271 | (mode->clock > 165000 && !priv->duallink_slave)) |
| 272 | return MODE_CLOCK_HIGH; |
| 273 | |
| 274 | return MODE_OK; |
| 275 | } |
| 276 | |
| 277 | static void |
| 278 | sil164_encoder_mode_set(struct drm_encoder *encoder, |
| 279 | struct drm_display_mode *mode, |
| 280 | struct drm_display_mode *adjusted_mode) |
| 281 | { |
| 282 | struct sil164_priv *priv = to_sil164_priv(encoder); |
| 283 | bool duallink = adjusted_mode->clock > 165000; |
| 284 | |
| 285 | sil164_init_state(drm_i2c_encoder_get_client(encoder), |
| 286 | &priv->config, duallink); |
| 287 | |
| 288 | if (priv->duallink_slave) |
| 289 | sil164_init_state(priv->duallink_slave, |
| 290 | &priv->config, duallink); |
| 291 | |
| 292 | sil164_encoder_dpms(encoder, DRM_MODE_DPMS_ON); |
| 293 | } |
| 294 | |
| 295 | static enum drm_connector_status |
| 296 | sil164_encoder_detect(struct drm_encoder *encoder, |
| 297 | struct drm_connector *connector) |
| 298 | { |
| 299 | struct i2c_client *client = drm_i2c_encoder_get_client(encoder); |
| 300 | |
| 301 | if (sil164_read(client, SIL164_DETECT) & SIL164_DETECT_HOTPLUG_STAT) |
| 302 | return connector_status_connected; |
| 303 | else |
| 304 | return connector_status_disconnected; |
| 305 | } |
| 306 | |
| 307 | static int |
| 308 | sil164_encoder_get_modes(struct drm_encoder *encoder, |
| 309 | struct drm_connector *connector) |
| 310 | { |
| 311 | return 0; |
| 312 | } |
| 313 | |
| 314 | static int |
| 315 | sil164_encoder_create_resources(struct drm_encoder *encoder, |
| 316 | struct drm_connector *connector) |
| 317 | { |
| 318 | return 0; |
| 319 | } |
| 320 | |
| 321 | static int |
| 322 | sil164_encoder_set_property(struct drm_encoder *encoder, |
| 323 | struct drm_connector *connector, |
| 324 | struct drm_property *property, |
| 325 | uint64_t val) |
| 326 | { |
| 327 | return 0; |
| 328 | } |
| 329 | |
| 330 | static void |
| 331 | sil164_encoder_destroy(struct drm_encoder *encoder) |
| 332 | { |
| 333 | struct sil164_priv *priv = to_sil164_priv(encoder); |
| 334 | |
| 335 | if (priv->duallink_slave) |
| 336 | i2c_unregister_device(priv->duallink_slave); |
| 337 | |
| 338 | kfree(priv); |
| 339 | drm_i2c_encoder_destroy(encoder); |
| 340 | } |
| 341 | |
| 342 | static struct drm_encoder_slave_funcs sil164_encoder_funcs = { |
| 343 | .set_config = sil164_encoder_set_config, |
| 344 | .destroy = sil164_encoder_destroy, |
| 345 | .dpms = sil164_encoder_dpms, |
| 346 | .save = sil164_encoder_save, |
| 347 | .restore = sil164_encoder_restore, |
| 348 | .mode_fixup = sil164_encoder_mode_fixup, |
| 349 | .mode_valid = sil164_encoder_mode_valid, |
| 350 | .mode_set = sil164_encoder_mode_set, |
| 351 | .detect = sil164_encoder_detect, |
| 352 | .get_modes = sil164_encoder_get_modes, |
| 353 | .create_resources = sil164_encoder_create_resources, |
| 354 | .set_property = sil164_encoder_set_property, |
| 355 | }; |
| 356 | |
| 357 | /* I2C driver functions */ |
| 358 | |
| 359 | static int |
| 360 | sil164_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| 361 | { |
| 362 | int vendor = sil164_read(client, SIL164_VENDOR_HI) << 8 | |
| 363 | sil164_read(client, SIL164_VENDOR_LO); |
| 364 | int device = sil164_read(client, SIL164_DEVICE_HI) << 8 | |
| 365 | sil164_read(client, SIL164_DEVICE_LO); |
| 366 | int rev = sil164_read(client, SIL164_REVISION); |
| 367 | |
| 368 | if (vendor != 0x1 || device != 0x6) { |
| 369 | sil164_dbg(client, "Unknown device %x:%x.%x\n", |
| 370 | vendor, device, rev); |
| 371 | return -ENODEV; |
| 372 | } |
| 373 | |
| 374 | sil164_info(client, "Detected device %x:%x.%x\n", |
| 375 | vendor, device, rev); |
| 376 | |
| 377 | return 0; |
| 378 | } |
| 379 | |
| 380 | static int |
| 381 | sil164_remove(struct i2c_client *client) |
| 382 | { |
| 383 | return 0; |
| 384 | } |
| 385 | |
| 386 | static struct i2c_client * |
| 387 | sil164_detect_slave(struct i2c_client *client) |
| 388 | { |
| 389 | struct i2c_adapter *adap = client->adapter; |
| 390 | struct i2c_msg msg = { |
| 391 | .addr = SIL164_I2C_ADDR_SLAVE, |
| 392 | .len = 0, |
| 393 | }; |
| 394 | const struct i2c_board_info info = { |
| 395 | I2C_BOARD_INFO("sil164", SIL164_I2C_ADDR_SLAVE) |
| 396 | }; |
| 397 | |
| 398 | if (i2c_transfer(adap, &msg, 1) != 1) { |
| 399 | sil164_dbg(adap, "No dual-link slave found."); |
| 400 | return NULL; |
| 401 | } |
| 402 | |
| 403 | return i2c_new_device(adap, &info); |
| 404 | } |
| 405 | |
| 406 | static int |
| 407 | sil164_encoder_init(struct i2c_client *client, |
| 408 | struct drm_device *dev, |
| 409 | struct drm_encoder_slave *encoder) |
| 410 | { |
| 411 | struct sil164_priv *priv; |
| 412 | |
| 413 | priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| 414 | if (!priv) |
| 415 | return -ENOMEM; |
| 416 | |
| 417 | encoder->slave_priv = priv; |
| 418 | encoder->slave_funcs = &sil164_encoder_funcs; |
| 419 | |
| 420 | priv->duallink_slave = sil164_detect_slave(client); |
| 421 | |
| 422 | return 0; |
| 423 | } |
| 424 | |
| 425 | static struct i2c_device_id sil164_ids[] = { |
| 426 | { "sil164", 0 }, |
| 427 | { } |
| 428 | }; |
| 429 | MODULE_DEVICE_TABLE(i2c, sil164_ids); |
| 430 | |
| 431 | static struct drm_i2c_encoder_driver sil164_driver = { |
| 432 | .i2c_driver = { |
| 433 | .probe = sil164_probe, |
| 434 | .remove = sil164_remove, |
| 435 | .driver = { |
| 436 | .name = "sil164", |
| 437 | }, |
| 438 | .id_table = sil164_ids, |
| 439 | }, |
| 440 | .encoder_init = sil164_encoder_init, |
| 441 | }; |
| 442 | |
| 443 | /* Module initialization */ |
| 444 | |
| 445 | static int __init |
| 446 | sil164_init(void) |
| 447 | { |
| 448 | return drm_i2c_encoder_register(THIS_MODULE, &sil164_driver); |
| 449 | } |
| 450 | |
| 451 | static void __exit |
| 452 | sil164_exit(void) |
| 453 | { |
| 454 | drm_i2c_encoder_unregister(&sil164_driver); |
| 455 | } |
| 456 | |
| 457 | MODULE_AUTHOR("Francisco Jerez <currojerez@riseup.net>"); |
| 458 | MODULE_DESCRIPTION("Silicon Image sil164 TMDS transmitter driver"); |
| 459 | MODULE_LICENSE("GPL and additional rights"); |
| 460 | |
| 461 | module_init(sil164_init); |
| 462 | module_exit(sil164_exit); |