| Sascha Hauer | 9f0749e | 2012-02-28 21:57:50 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2012 Sascha Hauer, Pengutronix |
| 3 | * |
| 4 | * The code contained herein is licensed under the GNU General Public |
| 5 | * License. You may obtain a copy of the GNU General Public License |
| 6 | * Version 2 or later at the following locations: |
| 7 | * |
| 8 | * http://www.opensource.org/licenses/gpl-license.html |
| 9 | * http://www.gnu.org/copyleft/gpl.html |
| 10 | */ |
| 11 | |
| 12 | /include/ "skeleton.dtsi" |
| 13 | |
| 14 | / { |
| 15 | aliases { |
| 16 | serial0 = &uart1; |
| 17 | serial1 = &uart2; |
| 18 | serial2 = &uart3; |
| 19 | serial3 = &uart4; |
| 20 | serial4 = &uart5; |
| 21 | serial5 = &uart6; |
| 22 | }; |
| 23 | |
| 24 | avic: avic-interrupt-controller@e0000000 { |
| 25 | compatible = "fsl,imx27-avic", "fsl,avic"; |
| 26 | interrupt-controller; |
| 27 | #interrupt-cells = <1>; |
| 28 | reg = <0x10040000 0x1000>; |
| 29 | }; |
| 30 | |
| 31 | clocks { |
| 32 | #address-cells = <1>; |
| 33 | #size-cells = <0>; |
| 34 | |
| 35 | osc26m { |
| 36 | compatible = "fsl,imx-osc26m", "fixed-clock"; |
| 37 | clock-frequency = <26000000>; |
| 38 | }; |
| 39 | }; |
| 40 | |
| 41 | soc { |
| 42 | #address-cells = <1>; |
| 43 | #size-cells = <1>; |
| 44 | compatible = "simple-bus"; |
| 45 | interrupt-parent = <&avic>; |
| 46 | ranges; |
| 47 | |
| 48 | aipi@10000000 { /* AIPI1 */ |
| 49 | compatible = "fsl,aipi-bus", "simple-bus"; |
| 50 | #address-cells = <1>; |
| 51 | #size-cells = <1>; |
| 52 | reg = <0x10000000 0x10000000>; |
| 53 | ranges; |
| 54 | |
| 55 | wdog@10002000 { |
| 56 | compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; |
| 57 | reg = <0x10002000 0x4000>; |
| 58 | interrupts = <27>; |
| 59 | status = "disabled"; |
| 60 | }; |
| 61 | |
| 62 | uart1: uart@1000a000 { |
| 63 | compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 64 | reg = <0x1000a000 0x1000>; |
| 65 | interrupts = <20>; |
| 66 | status = "disabled"; |
| 67 | }; |
| 68 | |
| 69 | uart2: uart@1000b000 { |
| 70 | compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 71 | reg = <0x1000b000 0x1000>; |
| 72 | interrupts = <19>; |
| 73 | status = "disabled"; |
| 74 | }; |
| 75 | |
| 76 | uart3: uart@1000c000 { |
| 77 | compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 78 | reg = <0x1000c000 0x1000>; |
| 79 | interrupts = <18>; |
| 80 | status = "disabled"; |
| 81 | }; |
| 82 | |
| 83 | uart4: uart@1000d000 { |
| 84 | compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 85 | reg = <0x1000d000 0x1000>; |
| 86 | interrupts = <17>; |
| 87 | status = "disabled"; |
| 88 | }; |
| 89 | |
| 90 | cspi1: cspi@1000e000 { |
| 91 | #address-cells = <1>; |
| 92 | #size-cells = <0>; |
| 93 | compatible = "fsl,imx27-cspi"; |
| 94 | reg = <0x1000e000 0x1000>; |
| 95 | interrupts = <16>; |
| 96 | status = "disabled"; |
| 97 | }; |
| 98 | |
| 99 | cspi2: cspi@1000f000 { |
| 100 | #address-cells = <1>; |
| 101 | #size-cells = <0>; |
| 102 | compatible = "fsl,imx27-cspi"; |
| 103 | reg = <0x1000f000 0x1000>; |
| 104 | interrupts = <15>; |
| 105 | status = "disabled"; |
| 106 | }; |
| 107 | |
| 108 | i2c1: i2c@10012000 { |
| 109 | #address-cells = <1>; |
| 110 | #size-cells = <0>; |
| 111 | compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; |
| 112 | reg = <0x10012000 0x1000>; |
| 113 | interrupts = <12>; |
| 114 | status = "disabled"; |
| 115 | }; |
| 116 | |
| 117 | gpio1: gpio@10015000 { |
| 118 | compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 119 | reg = <0x10015000 0x100>; |
| 120 | interrupts = <8>; |
| 121 | gpio-controller; |
| 122 | #gpio-cells = <2>; |
| 123 | interrupt-controller; |
| 124 | #interrupt-cells = <1>; |
| 125 | }; |
| 126 | |
| 127 | gpio2: gpio@10015100 { |
| 128 | compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 129 | reg = <0x10015100 0x100>; |
| 130 | interrupts = <8>; |
| 131 | gpio-controller; |
| 132 | #gpio-cells = <2>; |
| 133 | interrupt-controller; |
| 134 | #interrupt-cells = <1>; |
| 135 | }; |
| 136 | |
| 137 | gpio3: gpio@10015200 { |
| 138 | compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 139 | reg = <0x10015200 0x100>; |
| 140 | interrupts = <8>; |
| 141 | gpio-controller; |
| 142 | #gpio-cells = <2>; |
| 143 | interrupt-controller; |
| 144 | #interrupt-cells = <1>; |
| 145 | }; |
| 146 | |
| 147 | gpio4: gpio@10015300 { |
| 148 | compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 149 | reg = <0x10015300 0x100>; |
| 150 | interrupts = <8>; |
| 151 | gpio-controller; |
| 152 | #gpio-cells = <2>; |
| 153 | interrupt-controller; |
| 154 | #interrupt-cells = <1>; |
| 155 | }; |
| 156 | |
| 157 | gpio5: gpio@10015400 { |
| 158 | compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 159 | reg = <0x10015400 0x100>; |
| 160 | interrupts = <8>; |
| 161 | gpio-controller; |
| 162 | #gpio-cells = <2>; |
| 163 | interrupt-controller; |
| 164 | #interrupt-cells = <1>; |
| 165 | }; |
| 166 | |
| 167 | gpio6: gpio@10015500 { |
| 168 | compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 169 | reg = <0x10015500 0x100>; |
| 170 | interrupts = <8>; |
| 171 | gpio-controller; |
| 172 | #gpio-cells = <2>; |
| 173 | interrupt-controller; |
| 174 | #interrupt-cells = <1>; |
| 175 | }; |
| 176 | |
| 177 | cspi3: cspi@10017000 { |
| 178 | #address-cells = <1>; |
| 179 | #size-cells = <0>; |
| 180 | compatible = "fsl,imx27-cspi"; |
| 181 | reg = <0x10017000 0x1000>; |
| 182 | interrupts = <6>; |
| 183 | status = "disabled"; |
| 184 | }; |
| 185 | |
| 186 | uart5: uart@1001b000 { |
| 187 | compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 188 | reg = <0x1001b000 0x1000>; |
| 189 | interrupts = <49>; |
| 190 | status = "disabled"; |
| 191 | }; |
| 192 | |
| 193 | uart6: uart@1001c000 { |
| 194 | compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 195 | reg = <0x1001c000 0x1000>; |
| 196 | interrupts = <48>; |
| 197 | status = "disabled"; |
| 198 | }; |
| 199 | |
| 200 | i2c2: i2c@1001d000 { |
| 201 | #address-cells = <1>; |
| 202 | #size-cells = <0>; |
| 203 | compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; |
| 204 | reg = <0x1001d000 0x1000>; |
| 205 | interrupts = <1>; |
| 206 | status = "disabled"; |
| 207 | }; |
| 208 | |
| 209 | fec: fec@1002b000 { |
| 210 | compatible = "fsl,imx27-fec"; |
| 211 | reg = <0x1002b000 0x4000>; |
| 212 | interrupts = <50>; |
| 213 | status = "disabled"; |
| 214 | }; |
| 215 | }; |
| 216 | }; |
| 217 | }; |