Matti J. Aaltonen | 0329326 | 2011-01-12 17:00:47 -0800 | [diff] [blame] | 1 | /* |
| 2 | * Driver for the PN544 NFC chip. |
| 3 | * |
| 4 | * Copyright (C) Nokia Corporation |
| 5 | * |
| 6 | * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> |
| 7 | * Contact: Matti Aaltonen <matti.j.aaltonen@nokia.com> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License |
| 11 | * version 2 as published by the Free Software Foundation. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 21 | */ |
| 22 | |
| 23 | #include <linux/completion.h> |
| 24 | #include <linux/crc-ccitt.h> |
| 25 | #include <linux/delay.h> |
| 26 | #include <linux/interrupt.h> |
| 27 | #include <linux/kernel.h> |
| 28 | #include <linux/miscdevice.h> |
| 29 | #include <linux/module.h> |
| 30 | #include <linux/mutex.h> |
| 31 | #include <linux/nfc/pn544.h> |
| 32 | #include <linux/poll.h> |
| 33 | #include <linux/regulator/consumer.h> |
| 34 | #include <linux/serial_core.h> /* for TCGETS */ |
| 35 | #include <linux/slab.h> |
| 36 | |
| 37 | #define DRIVER_CARD "PN544 NFC" |
| 38 | #define DRIVER_DESC "NFC driver for PN544" |
| 39 | |
| 40 | static struct i2c_device_id pn544_id_table[] = { |
| 41 | { PN544_DRIVER_NAME, 0 }, |
| 42 | { } |
| 43 | }; |
| 44 | MODULE_DEVICE_TABLE(i2c, pn544_id_table); |
| 45 | |
| 46 | #define HCI_MODE 0 |
| 47 | #define FW_MODE 1 |
| 48 | |
| 49 | enum pn544_state { |
| 50 | PN544_ST_COLD, |
| 51 | PN544_ST_FW_READY, |
| 52 | PN544_ST_READY, |
| 53 | }; |
| 54 | |
| 55 | enum pn544_irq { |
| 56 | PN544_NONE, |
| 57 | PN544_INT, |
| 58 | }; |
| 59 | |
| 60 | struct pn544_info { |
| 61 | struct miscdevice miscdev; |
| 62 | struct i2c_client *i2c_dev; |
Matti J. Aaltonen | ac3c830 | 2011-02-25 14:44:19 -0800 | [diff] [blame] | 63 | struct regulator_bulk_data regs[3]; |
Matti J. Aaltonen | 0329326 | 2011-01-12 17:00:47 -0800 | [diff] [blame] | 64 | |
| 65 | enum pn544_state state; |
| 66 | wait_queue_head_t read_wait; |
| 67 | loff_t read_offset; |
| 68 | enum pn544_irq read_irq; |
| 69 | struct mutex read_mutex; /* Serialize read_irq access */ |
| 70 | struct mutex mutex; /* Serialize info struct access */ |
| 71 | u8 *buf; |
Andrew Morton | e78bf5e | 2011-01-16 16:55:23 -0800 | [diff] [blame] | 72 | size_t buflen; |
Matti J. Aaltonen | 0329326 | 2011-01-12 17:00:47 -0800 | [diff] [blame] | 73 | }; |
| 74 | |
| 75 | static const char reg_vdd_io[] = "Vdd_IO"; |
| 76 | static const char reg_vbat[] = "VBat"; |
Matti J. Aaltonen | ac3c830 | 2011-02-25 14:44:19 -0800 | [diff] [blame] | 77 | static const char reg_vsim[] = "VSim"; |
Matti J. Aaltonen | 0329326 | 2011-01-12 17:00:47 -0800 | [diff] [blame] | 78 | |
| 79 | /* sysfs interface */ |
| 80 | static ssize_t pn544_test(struct device *dev, |
| 81 | struct device_attribute *attr, char *buf) |
| 82 | { |
| 83 | struct pn544_info *info = dev_get_drvdata(dev); |
| 84 | struct i2c_client *client = info->i2c_dev; |
| 85 | struct pn544_nfc_platform_data *pdata = client->dev.platform_data; |
| 86 | |
| 87 | return snprintf(buf, PAGE_SIZE, "%d\n", pdata->test()); |
| 88 | } |
| 89 | |
| 90 | static int pn544_enable(struct pn544_info *info, int mode) |
| 91 | { |
| 92 | struct pn544_nfc_platform_data *pdata; |
| 93 | struct i2c_client *client = info->i2c_dev; |
| 94 | |
| 95 | int r; |
| 96 | |
| 97 | r = regulator_bulk_enable(ARRAY_SIZE(info->regs), info->regs); |
| 98 | if (r < 0) |
| 99 | return r; |
| 100 | |
| 101 | pdata = client->dev.platform_data; |
| 102 | info->read_irq = PN544_NONE; |
| 103 | if (pdata->enable) |
| 104 | pdata->enable(mode); |
| 105 | |
| 106 | if (mode) { |
| 107 | info->state = PN544_ST_FW_READY; |
| 108 | dev_dbg(&client->dev, "now in FW-mode\n"); |
| 109 | } else { |
| 110 | info->state = PN544_ST_READY; |
| 111 | dev_dbg(&client->dev, "now in HCI-mode\n"); |
| 112 | } |
| 113 | |
| 114 | usleep_range(10000, 15000); |
| 115 | |
| 116 | return 0; |
| 117 | } |
| 118 | |
| 119 | static void pn544_disable(struct pn544_info *info) |
| 120 | { |
| 121 | struct pn544_nfc_platform_data *pdata; |
| 122 | struct i2c_client *client = info->i2c_dev; |
| 123 | |
| 124 | pdata = client->dev.platform_data; |
| 125 | if (pdata->disable) |
| 126 | pdata->disable(); |
| 127 | |
| 128 | info->state = PN544_ST_COLD; |
| 129 | |
| 130 | dev_dbg(&client->dev, "Now in OFF-mode\n"); |
| 131 | |
| 132 | msleep(PN544_RESETVEN_TIME); |
| 133 | |
| 134 | info->read_irq = PN544_NONE; |
| 135 | regulator_bulk_disable(ARRAY_SIZE(info->regs), info->regs); |
| 136 | } |
| 137 | |
| 138 | static int check_crc(u8 *buf, int buflen) |
| 139 | { |
| 140 | u8 len; |
| 141 | u16 crc; |
| 142 | |
| 143 | len = buf[0] + 1; |
| 144 | if (len < 4 || len != buflen || len > PN544_MSG_MAX_SIZE) { |
| 145 | pr_err(PN544_DRIVER_NAME |
| 146 | ": CRC; corrupt packet len %u (%d)\n", len, buflen); |
| 147 | print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, |
| 148 | 16, 2, buf, buflen, false); |
| 149 | return -EPERM; |
| 150 | } |
| 151 | crc = crc_ccitt(0xffff, buf, len - 2); |
| 152 | crc = ~crc; |
| 153 | |
| 154 | if (buf[len-2] != (crc & 0xff) || buf[len-1] != (crc >> 8)) { |
| 155 | pr_err(PN544_DRIVER_NAME ": CRC error 0x%x != 0x%x 0x%x\n", |
| 156 | crc, buf[len-1], buf[len-2]); |
| 157 | |
| 158 | print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, |
| 159 | 16, 2, buf, buflen, false); |
| 160 | return -EPERM; |
| 161 | } |
| 162 | return 0; |
| 163 | } |
| 164 | |
| 165 | static int pn544_i2c_write(struct i2c_client *client, u8 *buf, int len) |
| 166 | { |
| 167 | int r; |
| 168 | |
| 169 | if (len < 4 || len != (buf[0] + 1)) { |
| 170 | dev_err(&client->dev, "%s: Illegal message length: %d\n", |
| 171 | __func__, len); |
| 172 | return -EINVAL; |
| 173 | } |
| 174 | |
| 175 | if (check_crc(buf, len)) |
| 176 | return -EINVAL; |
| 177 | |
| 178 | usleep_range(3000, 6000); |
| 179 | |
| 180 | r = i2c_master_send(client, buf, len); |
| 181 | dev_dbg(&client->dev, "send: %d\n", r); |
| 182 | |
| 183 | if (r == -EREMOTEIO) { /* Retry, chip was in standby */ |
| 184 | usleep_range(6000, 10000); |
| 185 | r = i2c_master_send(client, buf, len); |
| 186 | dev_dbg(&client->dev, "send2: %d\n", r); |
| 187 | } |
| 188 | |
| 189 | if (r != len) |
| 190 | return -EREMOTEIO; |
| 191 | |
| 192 | return r; |
| 193 | } |
| 194 | |
| 195 | static int pn544_i2c_read(struct i2c_client *client, u8 *buf, int buflen) |
| 196 | { |
| 197 | int r; |
| 198 | u8 len; |
| 199 | |
| 200 | /* |
| 201 | * You could read a packet in one go, but then you'd need to read |
| 202 | * max size and rest would be 0xff fill, so we do split reads. |
| 203 | */ |
| 204 | r = i2c_master_recv(client, &len, 1); |
| 205 | dev_dbg(&client->dev, "recv1: %d\n", r); |
| 206 | |
| 207 | if (r != 1) |
| 208 | return -EREMOTEIO; |
| 209 | |
| 210 | if (len < PN544_LLC_HCI_OVERHEAD) |
| 211 | len = PN544_LLC_HCI_OVERHEAD; |
| 212 | else if (len > (PN544_MSG_MAX_SIZE - 1)) |
| 213 | len = PN544_MSG_MAX_SIZE - 1; |
| 214 | |
| 215 | if (1 + len > buflen) /* len+(data+crc16) */ |
| 216 | return -EMSGSIZE; |
| 217 | |
| 218 | buf[0] = len; |
| 219 | |
| 220 | r = i2c_master_recv(client, buf + 1, len); |
| 221 | dev_dbg(&client->dev, "recv2: %d\n", r); |
| 222 | |
| 223 | if (r != len) |
| 224 | return -EREMOTEIO; |
| 225 | |
| 226 | usleep_range(3000, 6000); |
| 227 | |
| 228 | return r + 1; |
| 229 | } |
| 230 | |
| 231 | static int pn544_fw_write(struct i2c_client *client, u8 *buf, int len) |
| 232 | { |
| 233 | int r; |
| 234 | |
| 235 | dev_dbg(&client->dev, "%s\n", __func__); |
| 236 | |
| 237 | if (len < PN544_FW_HEADER_SIZE || |
| 238 | (PN544_FW_HEADER_SIZE + (buf[1] << 8) + buf[2]) != len) |
| 239 | return -EINVAL; |
| 240 | |
| 241 | r = i2c_master_send(client, buf, len); |
| 242 | dev_dbg(&client->dev, "fw send: %d\n", r); |
| 243 | |
| 244 | if (r == -EREMOTEIO) { /* Retry, chip was in standby */ |
| 245 | usleep_range(6000, 10000); |
| 246 | r = i2c_master_send(client, buf, len); |
| 247 | dev_dbg(&client->dev, "fw send2: %d\n", r); |
| 248 | } |
| 249 | |
| 250 | if (r != len) |
| 251 | return -EREMOTEIO; |
| 252 | |
| 253 | return r; |
| 254 | } |
| 255 | |
| 256 | static int pn544_fw_read(struct i2c_client *client, u8 *buf, int buflen) |
| 257 | { |
| 258 | int r, len; |
| 259 | |
| 260 | if (buflen < PN544_FW_HEADER_SIZE) |
| 261 | return -EINVAL; |
| 262 | |
| 263 | r = i2c_master_recv(client, buf, PN544_FW_HEADER_SIZE); |
| 264 | dev_dbg(&client->dev, "FW recv1: %d\n", r); |
| 265 | |
| 266 | if (r < 0) |
| 267 | return r; |
| 268 | |
| 269 | if (r < PN544_FW_HEADER_SIZE) |
| 270 | return -EINVAL; |
| 271 | |
| 272 | len = (buf[1] << 8) + buf[2]; |
| 273 | if (len == 0) /* just header, no additional data */ |
| 274 | return r; |
| 275 | |
| 276 | if (len > buflen - PN544_FW_HEADER_SIZE) |
| 277 | return -EMSGSIZE; |
| 278 | |
| 279 | r = i2c_master_recv(client, buf + PN544_FW_HEADER_SIZE, len); |
| 280 | dev_dbg(&client->dev, "fw recv2: %d\n", r); |
| 281 | |
| 282 | if (r != len) |
| 283 | return -EINVAL; |
| 284 | |
| 285 | return r + PN544_FW_HEADER_SIZE; |
| 286 | } |
| 287 | |
| 288 | static irqreturn_t pn544_irq_thread_fn(int irq, void *dev_id) |
| 289 | { |
| 290 | struct pn544_info *info = dev_id; |
| 291 | struct i2c_client *client = info->i2c_dev; |
| 292 | |
| 293 | BUG_ON(!info); |
| 294 | BUG_ON(irq != info->i2c_dev->irq); |
| 295 | |
| 296 | dev_dbg(&client->dev, "IRQ\n"); |
| 297 | |
| 298 | mutex_lock(&info->read_mutex); |
| 299 | info->read_irq = PN544_INT; |
| 300 | mutex_unlock(&info->read_mutex); |
| 301 | |
| 302 | wake_up_interruptible(&info->read_wait); |
| 303 | |
| 304 | return IRQ_HANDLED; |
| 305 | } |
| 306 | |
| 307 | static enum pn544_irq pn544_irq_state(struct pn544_info *info) |
| 308 | { |
| 309 | enum pn544_irq irq; |
| 310 | |
| 311 | mutex_lock(&info->read_mutex); |
| 312 | irq = info->read_irq; |
| 313 | mutex_unlock(&info->read_mutex); |
| 314 | /* |
| 315 | * XXX: should we check GPIO-line status directly? |
| 316 | * return pdata->irq_status() ? PN544_INT : PN544_NONE; |
| 317 | */ |
| 318 | |
| 319 | return irq; |
| 320 | } |
| 321 | |
| 322 | static ssize_t pn544_read(struct file *file, char __user *buf, |
| 323 | size_t count, loff_t *offset) |
| 324 | { |
| 325 | struct pn544_info *info = container_of(file->private_data, |
| 326 | struct pn544_info, miscdev); |
| 327 | struct i2c_client *client = info->i2c_dev; |
| 328 | enum pn544_irq irq; |
| 329 | size_t len; |
| 330 | int r = 0; |
| 331 | |
| 332 | dev_dbg(&client->dev, "%s: info: %p, count: %zu\n", __func__, |
| 333 | info, count); |
| 334 | |
| 335 | mutex_lock(&info->mutex); |
| 336 | |
| 337 | if (info->state == PN544_ST_COLD) { |
| 338 | r = -ENODEV; |
| 339 | goto out; |
| 340 | } |
| 341 | |
| 342 | irq = pn544_irq_state(info); |
| 343 | if (irq == PN544_NONE) { |
| 344 | if (file->f_flags & O_NONBLOCK) { |
| 345 | r = -EAGAIN; |
| 346 | goto out; |
| 347 | } |
| 348 | |
| 349 | if (wait_event_interruptible(info->read_wait, |
| 350 | (info->read_irq == PN544_INT))) { |
| 351 | r = -ERESTARTSYS; |
| 352 | goto out; |
| 353 | } |
| 354 | } |
| 355 | |
| 356 | if (info->state == PN544_ST_FW_READY) { |
| 357 | len = min(count, info->buflen); |
| 358 | |
| 359 | mutex_lock(&info->read_mutex); |
| 360 | r = pn544_fw_read(info->i2c_dev, info->buf, len); |
| 361 | info->read_irq = PN544_NONE; |
| 362 | mutex_unlock(&info->read_mutex); |
| 363 | |
| 364 | if (r < 0) { |
| 365 | dev_err(&info->i2c_dev->dev, "FW read failed: %d\n", r); |
| 366 | goto out; |
| 367 | } |
| 368 | |
| 369 | print_hex_dump(KERN_DEBUG, "FW read: ", DUMP_PREFIX_NONE, |
| 370 | 16, 2, info->buf, r, false); |
| 371 | |
| 372 | *offset += r; |
| 373 | if (copy_to_user(buf, info->buf, r)) { |
| 374 | r = -EFAULT; |
| 375 | goto out; |
| 376 | } |
| 377 | } else { |
| 378 | len = min(count, info->buflen); |
| 379 | |
| 380 | mutex_lock(&info->read_mutex); |
| 381 | r = pn544_i2c_read(info->i2c_dev, info->buf, len); |
| 382 | info->read_irq = PN544_NONE; |
| 383 | mutex_unlock(&info->read_mutex); |
| 384 | |
| 385 | if (r < 0) { |
| 386 | dev_err(&info->i2c_dev->dev, "read failed (%d)\n", r); |
| 387 | goto out; |
| 388 | } |
| 389 | print_hex_dump(KERN_DEBUG, "read: ", DUMP_PREFIX_NONE, |
| 390 | 16, 2, info->buf, r, false); |
| 391 | |
| 392 | *offset += r; |
| 393 | if (copy_to_user(buf, info->buf, r)) { |
| 394 | r = -EFAULT; |
| 395 | goto out; |
| 396 | } |
| 397 | } |
| 398 | |
| 399 | out: |
| 400 | mutex_unlock(&info->mutex); |
| 401 | |
| 402 | return r; |
| 403 | } |
| 404 | |
| 405 | static unsigned int pn544_poll(struct file *file, poll_table *wait) |
| 406 | { |
| 407 | struct pn544_info *info = container_of(file->private_data, |
| 408 | struct pn544_info, miscdev); |
| 409 | struct i2c_client *client = info->i2c_dev; |
| 410 | int r = 0; |
| 411 | |
| 412 | dev_dbg(&client->dev, "%s: info: %p\n", __func__, info); |
| 413 | |
| 414 | mutex_lock(&info->mutex); |
| 415 | |
| 416 | if (info->state == PN544_ST_COLD) { |
| 417 | r = -ENODEV; |
| 418 | goto out; |
| 419 | } |
| 420 | |
| 421 | poll_wait(file, &info->read_wait, wait); |
| 422 | |
| 423 | if (pn544_irq_state(info) == PN544_INT) { |
| 424 | r = POLLIN | POLLRDNORM; |
| 425 | goto out; |
| 426 | } |
| 427 | out: |
| 428 | mutex_unlock(&info->mutex); |
| 429 | |
| 430 | return r; |
| 431 | } |
| 432 | |
| 433 | static ssize_t pn544_write(struct file *file, const char __user *buf, |
| 434 | size_t count, loff_t *ppos) |
| 435 | { |
| 436 | struct pn544_info *info = container_of(file->private_data, |
| 437 | struct pn544_info, miscdev); |
| 438 | struct i2c_client *client = info->i2c_dev; |
| 439 | ssize_t len; |
| 440 | int r; |
| 441 | |
| 442 | dev_dbg(&client->dev, "%s: info: %p, count %zu\n", __func__, |
| 443 | info, count); |
| 444 | |
| 445 | mutex_lock(&info->mutex); |
| 446 | |
| 447 | if (info->state == PN544_ST_COLD) { |
| 448 | r = -ENODEV; |
| 449 | goto out; |
| 450 | } |
| 451 | |
| 452 | /* |
| 453 | * XXX: should we detect rset-writes and clean possible |
| 454 | * read_irq state |
| 455 | */ |
| 456 | if (info->state == PN544_ST_FW_READY) { |
| 457 | size_t fw_len; |
| 458 | |
| 459 | if (count < PN544_FW_HEADER_SIZE) { |
| 460 | r = -EINVAL; |
| 461 | goto out; |
| 462 | } |
| 463 | |
| 464 | len = min(count, info->buflen); |
| 465 | if (copy_from_user(info->buf, buf, len)) { |
| 466 | r = -EFAULT; |
| 467 | goto out; |
| 468 | } |
| 469 | |
| 470 | print_hex_dump(KERN_DEBUG, "FW write: ", DUMP_PREFIX_NONE, |
| 471 | 16, 2, info->buf, len, false); |
| 472 | |
| 473 | fw_len = PN544_FW_HEADER_SIZE + (info->buf[1] << 8) + |
| 474 | info->buf[2]; |
| 475 | |
| 476 | if (len > fw_len) /* 1 msg at a time */ |
| 477 | len = fw_len; |
| 478 | |
| 479 | r = pn544_fw_write(info->i2c_dev, info->buf, len); |
| 480 | } else { |
| 481 | if (count < PN544_LLC_MIN_SIZE) { |
| 482 | r = -EINVAL; |
| 483 | goto out; |
| 484 | } |
| 485 | |
| 486 | len = min(count, info->buflen); |
| 487 | if (copy_from_user(info->buf, buf, len)) { |
| 488 | r = -EFAULT; |
| 489 | goto out; |
| 490 | } |
| 491 | |
| 492 | print_hex_dump(KERN_DEBUG, "write: ", DUMP_PREFIX_NONE, |
| 493 | 16, 2, info->buf, len, false); |
| 494 | |
| 495 | if (len > (info->buf[0] + 1)) /* 1 msg at a time */ |
| 496 | len = info->buf[0] + 1; |
| 497 | |
| 498 | r = pn544_i2c_write(info->i2c_dev, info->buf, len); |
| 499 | } |
| 500 | out: |
| 501 | mutex_unlock(&info->mutex); |
| 502 | |
| 503 | return r; |
| 504 | |
| 505 | } |
| 506 | |
| 507 | static long pn544_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| 508 | { |
| 509 | struct pn544_info *info = container_of(file->private_data, |
| 510 | struct pn544_info, miscdev); |
| 511 | struct i2c_client *client = info->i2c_dev; |
| 512 | struct pn544_nfc_platform_data *pdata; |
| 513 | unsigned int val; |
| 514 | int r = 0; |
| 515 | |
| 516 | dev_dbg(&client->dev, "%s: info: %p, cmd: 0x%x\n", __func__, info, cmd); |
| 517 | |
| 518 | mutex_lock(&info->mutex); |
| 519 | |
| 520 | if (info->state == PN544_ST_COLD) { |
| 521 | r = -ENODEV; |
| 522 | goto out; |
| 523 | } |
| 524 | |
| 525 | pdata = info->i2c_dev->dev.platform_data; |
| 526 | switch (cmd) { |
| 527 | case PN544_GET_FW_MODE: |
| 528 | dev_dbg(&client->dev, "%s: PN544_GET_FW_MODE\n", __func__); |
| 529 | |
| 530 | val = (info->state == PN544_ST_FW_READY); |
| 531 | if (copy_to_user((void __user *)arg, &val, sizeof(val))) { |
| 532 | r = -EFAULT; |
| 533 | goto out; |
| 534 | } |
| 535 | |
| 536 | break; |
| 537 | |
| 538 | case PN544_SET_FW_MODE: |
| 539 | dev_dbg(&client->dev, "%s: PN544_SET_FW_MODE\n", __func__); |
| 540 | |
| 541 | if (copy_from_user(&val, (void __user *)arg, sizeof(val))) { |
| 542 | r = -EFAULT; |
| 543 | goto out; |
| 544 | } |
| 545 | |
| 546 | if (val) { |
| 547 | if (info->state == PN544_ST_FW_READY) |
| 548 | break; |
| 549 | |
| 550 | pn544_disable(info); |
| 551 | r = pn544_enable(info, FW_MODE); |
| 552 | if (r < 0) |
| 553 | goto out; |
| 554 | } else { |
| 555 | if (info->state == PN544_ST_READY) |
| 556 | break; |
| 557 | pn544_disable(info); |
| 558 | r = pn544_enable(info, HCI_MODE); |
| 559 | if (r < 0) |
| 560 | goto out; |
| 561 | } |
| 562 | file->f_pos = info->read_offset; |
| 563 | break; |
| 564 | |
| 565 | case TCGETS: |
| 566 | dev_dbg(&client->dev, "%s: TCGETS\n", __func__); |
| 567 | |
| 568 | r = -ENOIOCTLCMD; |
| 569 | break; |
| 570 | |
| 571 | default: |
| 572 | dev_err(&client->dev, "Unknown ioctl 0x%x\n", cmd); |
| 573 | r = -ENOIOCTLCMD; |
| 574 | break; |
| 575 | } |
| 576 | |
| 577 | out: |
| 578 | mutex_unlock(&info->mutex); |
| 579 | |
| 580 | return r; |
| 581 | } |
| 582 | |
| 583 | static int pn544_open(struct inode *inode, struct file *file) |
| 584 | { |
| 585 | struct pn544_info *info = container_of(file->private_data, |
| 586 | struct pn544_info, miscdev); |
| 587 | struct i2c_client *client = info->i2c_dev; |
| 588 | int r = 0; |
| 589 | |
| 590 | dev_dbg(&client->dev, "%s: info: %p, client %p\n", __func__, |
| 591 | info, info->i2c_dev); |
| 592 | |
| 593 | mutex_lock(&info->mutex); |
| 594 | |
| 595 | /* |
| 596 | * Only 1 at a time. |
| 597 | * XXX: maybe user (counter) would work better |
| 598 | */ |
| 599 | if (info->state != PN544_ST_COLD) { |
| 600 | r = -EBUSY; |
| 601 | goto out; |
| 602 | } |
| 603 | |
| 604 | file->f_pos = info->read_offset; |
| 605 | r = pn544_enable(info, HCI_MODE); |
| 606 | |
| 607 | out: |
| 608 | mutex_unlock(&info->mutex); |
| 609 | return r; |
| 610 | } |
| 611 | |
| 612 | static int pn544_close(struct inode *inode, struct file *file) |
| 613 | { |
| 614 | struct pn544_info *info = container_of(file->private_data, |
| 615 | struct pn544_info, miscdev); |
| 616 | struct i2c_client *client = info->i2c_dev; |
| 617 | |
| 618 | dev_dbg(&client->dev, "%s: info: %p, client %p\n", |
| 619 | __func__, info, info->i2c_dev); |
| 620 | |
| 621 | mutex_lock(&info->mutex); |
| 622 | pn544_disable(info); |
| 623 | mutex_unlock(&info->mutex); |
| 624 | |
| 625 | return 0; |
| 626 | } |
| 627 | |
| 628 | static const struct file_operations pn544_fops = { |
| 629 | .owner = THIS_MODULE, |
| 630 | .llseek = no_llseek, |
| 631 | .read = pn544_read, |
| 632 | .write = pn544_write, |
| 633 | .poll = pn544_poll, |
| 634 | .open = pn544_open, |
| 635 | .release = pn544_close, |
| 636 | .unlocked_ioctl = pn544_ioctl, |
| 637 | }; |
| 638 | |
| 639 | #ifdef CONFIG_PM |
| 640 | static int pn544_suspend(struct device *dev) |
| 641 | { |
| 642 | struct i2c_client *client = to_i2c_client(dev); |
| 643 | struct pn544_info *info; |
| 644 | int r = 0; |
| 645 | |
| 646 | dev_info(&client->dev, "***\n%s: client %p\n***\n", __func__, client); |
| 647 | |
| 648 | info = i2c_get_clientdata(client); |
| 649 | dev_info(&client->dev, "%s: info: %p, client %p\n", __func__, |
| 650 | info, client); |
| 651 | |
| 652 | mutex_lock(&info->mutex); |
| 653 | |
| 654 | switch (info->state) { |
| 655 | case PN544_ST_FW_READY: |
| 656 | /* Do not suspend while upgrading FW, please! */ |
| 657 | r = -EPERM; |
| 658 | break; |
| 659 | |
| 660 | case PN544_ST_READY: |
| 661 | /* |
| 662 | * CHECK: Device should be in standby-mode. No way to check? |
| 663 | * Allowing low power mode for the regulator is potentially |
| 664 | * dangerous if pn544 does not go to suspension. |
| 665 | */ |
| 666 | break; |
| 667 | |
| 668 | case PN544_ST_COLD: |
| 669 | break; |
| 670 | }; |
| 671 | |
| 672 | mutex_unlock(&info->mutex); |
| 673 | return r; |
| 674 | } |
| 675 | |
| 676 | static int pn544_resume(struct device *dev) |
| 677 | { |
| 678 | struct i2c_client *client = to_i2c_client(dev); |
| 679 | struct pn544_info *info = i2c_get_clientdata(client); |
| 680 | int r = 0; |
| 681 | |
| 682 | dev_dbg(&client->dev, "%s: info: %p, client %p\n", __func__, |
| 683 | info, client); |
| 684 | |
| 685 | mutex_lock(&info->mutex); |
| 686 | |
| 687 | switch (info->state) { |
| 688 | case PN544_ST_READY: |
| 689 | /* |
| 690 | * CHECK: If regulator low power mode is allowed in |
| 691 | * pn544_suspend, we should go back to normal mode |
| 692 | * here. |
| 693 | */ |
| 694 | break; |
| 695 | |
| 696 | case PN544_ST_COLD: |
| 697 | break; |
| 698 | |
| 699 | case PN544_ST_FW_READY: |
| 700 | break; |
| 701 | }; |
| 702 | |
| 703 | mutex_unlock(&info->mutex); |
| 704 | |
| 705 | return r; |
| 706 | } |
| 707 | |
| 708 | static SIMPLE_DEV_PM_OPS(pn544_pm_ops, pn544_suspend, pn544_resume); |
| 709 | #endif |
| 710 | |
| 711 | static struct device_attribute pn544_attr = |
| 712 | __ATTR(nfc_test, S_IRUGO, pn544_test, NULL); |
| 713 | |
| 714 | static int __devinit pn544_probe(struct i2c_client *client, |
| 715 | const struct i2c_device_id *id) |
| 716 | { |
| 717 | struct pn544_info *info; |
| 718 | struct pn544_nfc_platform_data *pdata; |
| 719 | int r = 0; |
| 720 | |
| 721 | dev_dbg(&client->dev, "%s\n", __func__); |
| 722 | dev_dbg(&client->dev, "IRQ: %d\n", client->irq); |
| 723 | |
| 724 | /* private data allocation */ |
| 725 | info = kzalloc(sizeof(struct pn544_info), GFP_KERNEL); |
| 726 | if (!info) { |
| 727 | dev_err(&client->dev, |
| 728 | "Cannot allocate memory for pn544_info.\n"); |
| 729 | r = -ENOMEM; |
| 730 | goto err_info_alloc; |
| 731 | } |
| 732 | |
| 733 | info->buflen = max(PN544_MSG_MAX_SIZE, PN544_MAX_I2C_TRANSFER); |
| 734 | info->buf = kzalloc(info->buflen, GFP_KERNEL); |
| 735 | if (!info->buf) { |
| 736 | dev_err(&client->dev, |
| 737 | "Cannot allocate memory for pn544_info->buf.\n"); |
| 738 | r = -ENOMEM; |
| 739 | goto err_buf_alloc; |
| 740 | } |
| 741 | |
| 742 | info->regs[0].supply = reg_vdd_io; |
| 743 | info->regs[1].supply = reg_vbat; |
Matti J. Aaltonen | ac3c830 | 2011-02-25 14:44:19 -0800 | [diff] [blame] | 744 | info->regs[2].supply = reg_vsim; |
Matti J. Aaltonen | 0329326 | 2011-01-12 17:00:47 -0800 | [diff] [blame] | 745 | r = regulator_bulk_get(&client->dev, ARRAY_SIZE(info->regs), |
| 746 | info->regs); |
| 747 | if (r < 0) |
| 748 | goto err_kmalloc; |
| 749 | |
| 750 | info->i2c_dev = client; |
| 751 | info->state = PN544_ST_COLD; |
| 752 | info->read_irq = PN544_NONE; |
| 753 | mutex_init(&info->read_mutex); |
| 754 | mutex_init(&info->mutex); |
| 755 | init_waitqueue_head(&info->read_wait); |
| 756 | i2c_set_clientdata(client, info); |
| 757 | pdata = client->dev.platform_data; |
| 758 | if (!pdata) { |
| 759 | dev_err(&client->dev, "No platform data\n"); |
| 760 | r = -EINVAL; |
| 761 | goto err_reg; |
| 762 | } |
| 763 | |
| 764 | if (!pdata->request_resources) { |
| 765 | dev_err(&client->dev, "request_resources() missing\n"); |
| 766 | r = -EINVAL; |
| 767 | goto err_reg; |
| 768 | } |
| 769 | |
| 770 | r = pdata->request_resources(client); |
| 771 | if (r) { |
| 772 | dev_err(&client->dev, "Cannot get platform resources\n"); |
| 773 | goto err_reg; |
| 774 | } |
| 775 | |
| 776 | r = request_threaded_irq(client->irq, NULL, pn544_irq_thread_fn, |
| 777 | IRQF_TRIGGER_RISING, PN544_DRIVER_NAME, |
| 778 | info); |
| 779 | if (r < 0) { |
| 780 | dev_err(&client->dev, "Unable to register IRQ handler\n"); |
| 781 | goto err_res; |
| 782 | } |
| 783 | |
| 784 | /* If we don't have the test we don't need the sysfs file */ |
| 785 | if (pdata->test) { |
| 786 | r = device_create_file(&client->dev, &pn544_attr); |
| 787 | if (r) { |
| 788 | dev_err(&client->dev, |
| 789 | "sysfs registration failed, error %d\n", r); |
| 790 | goto err_irq; |
| 791 | } |
| 792 | } |
| 793 | |
| 794 | info->miscdev.minor = MISC_DYNAMIC_MINOR; |
| 795 | info->miscdev.name = PN544_DRIVER_NAME; |
| 796 | info->miscdev.fops = &pn544_fops; |
| 797 | info->miscdev.parent = &client->dev; |
| 798 | r = misc_register(&info->miscdev); |
| 799 | if (r < 0) { |
| 800 | dev_err(&client->dev, "Device registration failed\n"); |
| 801 | goto err_sysfs; |
| 802 | } |
| 803 | |
| 804 | dev_dbg(&client->dev, "%s: info: %p, pdata %p, client %p\n", |
| 805 | __func__, info, pdata, client); |
| 806 | |
| 807 | return 0; |
| 808 | |
| 809 | err_sysfs: |
| 810 | if (pdata->test) |
| 811 | device_remove_file(&client->dev, &pn544_attr); |
| 812 | err_irq: |
| 813 | free_irq(client->irq, info); |
| 814 | err_res: |
| 815 | if (pdata->free_resources) |
| 816 | pdata->free_resources(); |
| 817 | err_reg: |
| 818 | regulator_bulk_free(ARRAY_SIZE(info->regs), info->regs); |
| 819 | err_kmalloc: |
| 820 | kfree(info->buf); |
| 821 | err_buf_alloc: |
| 822 | kfree(info); |
| 823 | err_info_alloc: |
| 824 | return r; |
| 825 | } |
| 826 | |
| 827 | static __devexit int pn544_remove(struct i2c_client *client) |
| 828 | { |
| 829 | struct pn544_info *info = i2c_get_clientdata(client); |
| 830 | struct pn544_nfc_platform_data *pdata = client->dev.platform_data; |
| 831 | |
| 832 | dev_dbg(&client->dev, "%s\n", __func__); |
| 833 | |
| 834 | misc_deregister(&info->miscdev); |
| 835 | if (pdata->test) |
| 836 | device_remove_file(&client->dev, &pn544_attr); |
| 837 | |
| 838 | if (info->state != PN544_ST_COLD) { |
| 839 | if (pdata->disable) |
| 840 | pdata->disable(); |
| 841 | |
| 842 | info->read_irq = PN544_NONE; |
| 843 | } |
| 844 | |
| 845 | free_irq(client->irq, info); |
| 846 | if (pdata->free_resources) |
| 847 | pdata->free_resources(); |
| 848 | |
| 849 | regulator_bulk_free(ARRAY_SIZE(info->regs), info->regs); |
| 850 | kfree(info->buf); |
| 851 | kfree(info); |
| 852 | |
| 853 | return 0; |
| 854 | } |
| 855 | |
| 856 | static struct i2c_driver pn544_driver = { |
| 857 | .driver = { |
| 858 | .name = PN544_DRIVER_NAME, |
| 859 | #ifdef CONFIG_PM |
| 860 | .pm = &pn544_pm_ops, |
| 861 | #endif |
| 862 | }, |
| 863 | .probe = pn544_probe, |
| 864 | .id_table = pn544_id_table, |
| 865 | .remove = __devexit_p(pn544_remove), |
| 866 | }; |
| 867 | |
| 868 | static int __init pn544_init(void) |
| 869 | { |
| 870 | int r; |
| 871 | |
| 872 | pr_debug(DRIVER_DESC ": %s\n", __func__); |
| 873 | |
| 874 | r = i2c_add_driver(&pn544_driver); |
| 875 | if (r) { |
| 876 | pr_err(PN544_DRIVER_NAME ": driver registration failed\n"); |
| 877 | return r; |
| 878 | } |
| 879 | |
| 880 | return 0; |
| 881 | } |
| 882 | |
| 883 | static void __exit pn544_exit(void) |
| 884 | { |
| 885 | i2c_del_driver(&pn544_driver); |
| 886 | pr_info(DRIVER_DESC ", Exiting.\n"); |
| 887 | } |
| 888 | |
| 889 | module_init(pn544_init); |
| 890 | module_exit(pn544_exit); |
| 891 | |
| 892 | MODULE_LICENSE("GPL"); |
| 893 | MODULE_DESCRIPTION(DRIVER_DESC); |