blob: 9aa5b4f026669a35b96837710a2c7480a07a0a85 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* $Id: iflash.h,v 1.2 2000/11/13 18:01:54 dwmw2 Exp $ */
2
3#ifndef __MTD_IFLASH_H__
4#define __MTD_IFLASH_H__
5
6/* Extended CIS registers for Series 2 and 2+ cards */
7/* The registers are all offsets from 0x4000 */
8#define CISREG_CSR 0x0100
9#define CISREG_WP 0x0104
10#define CISREG_RDYBSY 0x0140
11
12/* Extended CIS registers for Series 2 cards */
13#define CISREG_SLEEP 0x0118
14#define CISREG_RDY_MASK 0x0120
15#define CISREG_RDY_STATUS 0x0130
16
17/* Extended CIS registers for Series 2+ cards */
18#define CISREG_VCR 0x010c
19
20/* Card Status Register */
21#define CSR_SRESET 0x20 /* Soft reset */
22#define CSR_CMWP 0x10 /* Common memory write protect */
23#define CSR_PWRDOWN 0x08 /* Power down status */
24#define CSR_CISWP 0x04 /* Common memory CIS WP */
25#define CSR_WP 0x02 /* Mechanical write protect */
26#define CSR_READY 0x01 /* Ready/busy status */
27
28/* Write Protection Register */
29#define WP_BLKEN 0x04 /* Enable block locking */
30#define WP_CMWP 0x02 /* Common memory write protect */
31#define WP_CISWP 0x01 /* Common memory CIS WP */
32
33/* Voltage Control Register */
34#define VCR_VCC_LEVEL 0x80 /* 0 = 5V, 1 = 3.3V */
35#define VCR_VPP_VALID 0x02 /* Vpp Valid */
36#define VCR_VPP_GEN 0x01 /* Integrated Vpp generator */
37
38/* Ready/Busy Mode Register */
39#define RDYBSY_RACK 0x02 /* Ready acknowledge */
40#define RDYBSY_MODE 0x01 /* 1 = high performance */
41
42#define LOW(x) ((x) & 0xff)
43
44/* 28F008SA-Compatible Command Set */
45#define IF_READ_ARRAY 0xffff
46#define IF_INTEL_ID 0x9090
47#define IF_READ_CSR 0x7070
48#define IF_CLEAR_CSR 0x5050
49#define IF_WRITE 0x4040
50#define IF_BLOCK_ERASE 0x2020
51#define IF_ERASE_SUSPEND 0xb0b0
52#define IF_CONFIRM 0xd0d0
53
54/* 28F016SA Performance Enhancement Commands */
55#define IF_READ_PAGE 0x7575
56#define IF_PAGE_SWAP 0x7272
57#define IF_SINGLE_LOAD 0x7474
58#define IF_SEQ_LOAD 0xe0e0
59#define IF_PAGE_WRITE 0x0c0c
60#define IF_RDY_MODE 0x9696
61#define IF_RDY_LEVEL 0x0101
62#define IF_RDY_PULSE_WRITE 0x0202
63#define IF_RDY_PULSE_ERASE 0x0303
64#define IF_RDY_DISABLE 0x0404
65#define IF_LOCK_BLOCK 0x7777
66#define IF_UPLOAD_STATUS 0x9797
67#define IF_READ_ESR 0x7171
68#define IF_ERASE_UNLOCKED 0xa7a7
69#define IF_SLEEP 0xf0f0
70#define IF_ABORT 0x8080
71#define IF_UPLOAD_DEVINFO 0x9999
72
73/* Definitions for Compatible Status Register */
74#define CSR_WR_READY 0x8080 /* Write state machine status */
75#define CSR_ERA_SUSPEND 0x4040 /* Erase suspend status */
76#define CSR_ERA_ERR 0x2020 /* Erase status */
77#define CSR_WR_ERR 0x1010 /* Data write status */
78#define CSR_VPP_LOW 0x0808 /* Vpp status */
79
80/* Definitions for Global Status Register */
81#define GSR_WR_READY 0x8080 /* Write state machine status */
82#define GSR_OP_SUSPEND 0x4040 /* Operation suspend status */
83#define GSR_OP_ERR 0x2020 /* Device operation status */
84#define GSR_SLEEP 0x1010 /* Device sleep status */
85#define GSR_QUEUE_FULL 0x0808 /* Queue status */
86#define GSR_PAGE_AVAIL 0x0404 /* Page buffer available status */
87#define GSR_PAGE_READY 0x0202 /* Page buffer status */
88#define GSR_PAGE_SELECT 0x0101 /* Page buffer select status */
89
90/* Definitions for Block Status Register */
91#define BSR_READY 0x8080 /* Block status */
92#define BSR_UNLOCK 0x4040 /* Block lock status */
93#define BSR_FAILED 0x2020 /* Block operation status */
94#define BSR_ABORTED 0x1010 /* Operation abort status */
95#define BSR_QUEUE_FULL 0x0808 /* Queue status */
96#define BSR_VPP_LOW 0x0404 /* Vpp status */
97
98#endif /* __MTD_IFLASH_H__ */