| #!/bin/bash |
| # |
| # Runner for an individual run-test. |
| |
| if [[ -z "$ANDROID_BUILD_TOP" ]]; then |
| echo 'ANDROID_BUILD_TOP environment variable is empty; did you forget to run `lunch`?' |
| exit 1 |
| fi |
| |
| msg() { |
| if [ "$QUIET" = "n" ]; then |
| echo "$@" |
| fi |
| } |
| |
| ANDROID_ROOT="/system" |
| ANDROID_ART_ROOT="/apex/com.android.art" |
| ANDROID_I18N_ROOT="/apex/com.android.i18n" |
| ANDROID_TZDATA_ROOT="/apex/com.android.tzdata" |
| ARCHITECTURES_32="(arm|x86|none)" |
| ARCHITECTURES_64="(arm64|x86_64|none)" |
| ARCHITECTURES_PATTERN="${ARCHITECTURES_32}" |
| GET_DEVICE_ISA_BITNESS_FLAG="--32" |
| BOOT_IMAGE="" |
| CHROOT= |
| COMPILE_FLAGS="" |
| DALVIKVM="dalvikvm32" |
| DEBUGGER="n" |
| WITH_AGENT=() |
| DEBUGGER_AGENT="" |
| WRAP_DEBUGGER_AGENT="n" |
| DEV_MODE="n" |
| DEX2OAT_NDEBUG_BINARY="dex2oat32" |
| DEX2OAT_DEBUG_BINARY="dex2oatd32" |
| EXPERIMENTAL="" |
| FALSE_BIN="false" |
| FLAGS="" |
| ANDROID_FLAGS="" |
| GDB="" |
| GDB_ARGS="" |
| GDBSERVER_DEVICE="gdbserver" |
| GDBSERVER_HOST="gdbserver" |
| HAVE_IMAGE="y" |
| HOST="n" |
| BIONIC="n" |
| CREATE_ANDROID_ROOT="n" |
| USE_ZIPAPEX="n" |
| ZIPAPEX_LOC="" |
| USE_EXTRACTED_ZIPAPEX="n" |
| EXTRACTED_ZIPAPEX_LOC="" |
| INTERPRETER="n" |
| JIT="n" |
| INVOKE_WITH="" |
| IS_JVMTI_TEST="n" |
| ADD_LIBDIR_ARGUMENTS="n" |
| SUFFIX64="" |
| ISA=x86 |
| LIBRARY_DIRECTORY="lib" |
| TEST_DIRECTORY="nativetest" |
| MAIN="" |
| OPTIMIZE="y" |
| PREBUILD="y" |
| QUIET="n" |
| RELOCATE="n" |
| SECONDARY_DEX="" |
| TIME_OUT="n" # "n" (disabled), "timeout" (use timeout), "gdb" (use gdb) |
| TIMEOUT_DUMPER=signal_dumper |
| # Values in seconds. |
| TIME_OUT_EXTRA=0 |
| TIME_OUT_VALUE= |
| USE_GDB="n" |
| USE_GDBSERVER="n" |
| GDBSERVER_PORT=":5039" |
| USE_JVM="n" |
| USE_JVMTI="n" |
| VERIFY="y" # y=yes,n=no,s=softfail |
| ZYGOTE="" |
| DEX_VERIFY="" |
| INSTRUCTION_SET_FEATURES="" |
| ARGS="" |
| VDEX_ARGS="" |
| EXTERNAL_LOG_TAGS="n" # if y respect externally set ANDROID_LOG_TAGS. |
| DRY_RUN="n" # if y prepare to run the test but don't run it. |
| TEST_VDEX="n" |
| TEST_DM="n" |
| TEST_IS_NDEBUG="n" |
| APP_IMAGE="y" |
| SECONDARY_APP_IMAGE="y" |
| SECONDARY_CLASS_LOADER_CONTEXT="" |
| SECONDARY_COMPILATION="y" |
| JVMTI_STRESS="n" |
| JVMTI_STEP_STRESS="n" |
| JVMTI_FIELD_STRESS="n" |
| JVMTI_TRACE_STRESS="n" |
| JVMTI_REDEFINE_STRESS="n" |
| PROFILE="n" |
| RANDOM_PROFILE="n" |
| # The normal dex2oat timeout. |
| DEX2OAT_TIMEOUT="300" # 5 mins |
| # The *hard* timeout where we really start trying to kill the dex2oat. |
| DEX2OAT_RT_TIMEOUT="360" # 6 mins |
| CREATE_RUNNER="n" |
| |
| # if "y", run 'sync' before dalvikvm to make sure all files from |
| # build step (e.g. dex2oat) were finished writing. |
| SYNC_BEFORE_RUN="n" |
| |
| # When running a debug build, we want to run with all checks. |
| ANDROID_FLAGS="${ANDROID_FLAGS} -XX:SlowDebug=true" |
| # The same for dex2oatd, both prebuild and runtime-driven. |
| ANDROID_FLAGS="${ANDROID_FLAGS} -Xcompiler-option --runtime-arg -Xcompiler-option -XX:SlowDebug=true" |
| COMPILER_FLAGS="${COMPILER_FLAGS} --runtime-arg -XX:SlowDebug=true" |
| |
| # Let the compiler and runtime know that we are running tests. |
| COMPILE_FLAGS="${COMPILE_FLAGS} --compile-art-test" |
| ANDROID_FLAGS="${ANDROID_FLAGS} -Xcompiler-option --compile-art-test" |
| |
| while true; do |
| if [ "x$1" = "x--quiet" ]; then |
| QUIET="y" |
| shift |
| elif [ "x$1" = "x--dex2oat-rt-timeout" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --dex2oat-rt-timeout" 1>&2 |
| exit 1 |
| fi |
| DEX2OAT_RT_TIMEOUT="$1" |
| shift |
| elif [ "x$1" = "x--dex2oat-timeout" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --dex2oat-timeout" 1>&2 |
| exit 1 |
| fi |
| DEX2OAT_TIMEOUT="$1" |
| shift |
| elif [ "x$1" = "x--jvmti" ]; then |
| USE_JVMTI="y" |
| IS_JVMTI_TEST="y" |
| # Secondary images block some tested behavior. |
| SECONDARY_APP_IMAGE="n" |
| shift |
| elif [ "x$1" = "x--add-libdir-argument" ]; then |
| ADD_LIBDIR_ARGUMENTS="y" |
| shift |
| elif [ "x$1" = "x-O" ]; then |
| TEST_IS_NDEBUG="y" |
| shift |
| elif [ "x$1" = "x--lib" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --lib" 1>&2 |
| exit 1 |
| fi |
| LIB="$1" |
| shift |
| elif [ "x$1" = "x--gc-stress" ]; then |
| # Give an extra 20 mins if we are gc-stress. |
| TIME_OUT_EXTRA=$((${TIME_OUT_EXTRA} + 1200)) |
| shift |
| elif [ "x$1" = "x--testlib" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --testlib" 1>&2 |
| exit 1 |
| fi |
| ARGS="${ARGS} $1" |
| shift |
| elif [ "x$1" = "x--args" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --args" 1>&2 |
| exit 1 |
| fi |
| ARGS="${ARGS} $1" |
| shift |
| elif [ "x$1" = "x--compiler-only-option" ]; then |
| shift |
| option="$1" |
| COMPILE_FLAGS="${COMPILE_FLAGS} $option" |
| shift |
| elif [ "x$1" = "x-Xcompiler-option" ]; then |
| shift |
| option="$1" |
| FLAGS="${FLAGS} -Xcompiler-option $option" |
| COMPILE_FLAGS="${COMPILE_FLAGS} $option" |
| shift |
| elif [ "x$1" = "x--create-runner" ]; then |
| CREATE_RUNNER="y" |
| shift |
| elif [ "x$1" = "x--android-runtime-option" ]; then |
| shift |
| option="$1" |
| ANDROID_FLAGS="${ANDROID_FLAGS} $option" |
| shift |
| elif [ "x$1" = "x--runtime-option" ]; then |
| shift |
| option="$1" |
| FLAGS="${FLAGS} $option" |
| if [ "x$option" = "x-Xmethod-trace" ]; then |
| # Method tracing can slow some tests down a lot, in particular |
| # 530-checker-lse2. |
| TIME_OUT_EXTRA=$((${TIME_OUT_EXTRA} + 1200)) |
| fi |
| shift |
| elif [ "x$1" = "x--boot" ]; then |
| shift |
| BOOT_IMAGE="$1" |
| shift |
| elif [ "x$1" = "x--relocate" ]; then |
| RELOCATE="y" |
| shift |
| elif [ "x$1" = "x--no-relocate" ]; then |
| RELOCATE="n" |
| shift |
| elif [ "x$1" = "x--prebuild" ]; then |
| PREBUILD="y" |
| shift |
| elif [ "x$1" = "x--compact-dex-level" ]; then |
| shift |
| COMPILE_FLAGS="${COMPILE_FLAGS} --compact-dex-level=$1" |
| shift |
| elif [ "x$1" = "x--jvmti-redefine-stress" ]; then |
| # APP_IMAGE doesn't really work with jvmti redefine stress |
| USE_JVMTI="y" |
| APP_IMAGE="n" |
| SECONDARY_APP_IMAGE="n" |
| JVMTI_STRESS="y" |
| JVMTI_REDEFINE_STRESS="y" |
| shift |
| elif [ "x$1" = "x--jvmti-step-stress" ]; then |
| USE_JVMTI="y" |
| JVMTI_STRESS="y" |
| JVMTI_STEP_STRESS="y" |
| shift |
| elif [ "x$1" = "x--jvmti-field-stress" ]; then |
| USE_JVMTI="y" |
| JVMTI_STRESS="y" |
| JVMTI_FIELD_STRESS="y" |
| shift |
| elif [ "x$1" = "x--jvmti-trace-stress" ]; then |
| USE_JVMTI="y" |
| JVMTI_STRESS="y" |
| JVMTI_TRACE_STRESS="y" |
| shift |
| elif [ "x$1" = "x--no-app-image" ]; then |
| APP_IMAGE="n" |
| shift |
| elif [ "x$1" = "x--no-secondary-app-image" ]; then |
| SECONDARY_APP_IMAGE="n" |
| shift |
| elif [ "x$1" = "x--secondary-class-loader-context" ]; then |
| shift |
| SECONDARY_CLASS_LOADER_CONTEXT="$1" |
| shift |
| elif [ "x$1" = "x--no-secondary-compilation" ]; then |
| SECONDARY_COMPILATION="n" |
| shift |
| elif [ "x$1" = "x--host" ]; then |
| HOST="y" |
| ANDROID_ROOT="${ANDROID_HOST_OUT}" |
| ANDROID_ART_ROOT="${ANDROID_HOST_OUT}/com.android.art" |
| ANDROID_I18N_ROOT="${ANDROID_HOST_OUT}/com.android.i18n" |
| ANDROID_TZDATA_ROOT="${ANDROID_HOST_OUT}/com.android.tzdata" |
| # On host, we default to using the symlink, as the PREFER_32BIT |
| # configuration is the only configuration building a 32bit version of |
| # dex2oat. |
| DEX2OAT_DEBUG_BINARY="dex2oatd" |
| DEX2OAT_NDEBUG_BINARY="dex2oat" |
| shift |
| elif [ "x$1" = "x--bionic" ]; then |
| BIONIC="y" |
| # We need to create an ANDROID_ROOT because currently we cannot create |
| # the frameworks/libcore with linux_bionic so we need to use the normal |
| # host ones which are in a different location. |
| CREATE_ANDROID_ROOT="y" |
| shift |
| elif [ "x$1" = "x--runtime-extracted-zipapex" ]; then |
| shift |
| USE_EXTRACTED_ZIPAPEX="y" |
| EXTRACTED_ZIPAPEX_LOC="$1" |
| shift |
| elif [ "x$1" = "x--runtime-zipapex" ]; then |
| shift |
| USE_ZIPAPEX="y" |
| ZIPAPEX_LOC="$1" |
| # TODO (b/119942078): Currently apex does not support |
| # symlink_preferred_arch so we will not have a dex2oatd to execute and |
| # need to manually provide |
| # dex2oatd64. |
| DEX2OAT_DEBUG_BINARY="dex2oatd64" |
| shift |
| elif [ "x$1" = "x--no-prebuild" ]; then |
| PREBUILD="n" |
| shift |
| elif [ "x$1" = "x--no-image" ]; then |
| HAVE_IMAGE="n" |
| shift |
| elif [ "x$1" = "x--secondary" ]; then |
| SECONDARY_DEX=":$DEX_LOCATION/$TEST_NAME-ex.jar" |
| # Enable cfg-append to make sure we get the dump for both dex files. |
| # (otherwise the runtime compilation of the secondary dex will overwrite |
| # the dump of the first one). |
| FLAGS="${FLAGS} -Xcompiler-option --dump-cfg-append" |
| COMPILE_FLAGS="${COMPILE_FLAGS} --dump-cfg-append" |
| shift |
| elif [ "x$1" = "x--with-agent" ]; then |
| shift |
| USE_JVMTI="y" |
| WITH_AGENT+=("$1") |
| shift |
| elif [ "x$1" = "x--debug-wrap-agent" ]; then |
| WRAP_DEBUGGER_AGENT="y" |
| shift |
| elif [ "x$1" = "x--debug-agent" ]; then |
| shift |
| DEBUGGER="agent" |
| USE_JVMTI="y" |
| DEBUGGER_AGENT="$1" |
| TIME_OUT="n" |
| shift |
| elif [ "x$1" = "x--debug" ]; then |
| USE_JVMTI="y" |
| DEBUGGER="y" |
| TIME_OUT="n" |
| shift |
| elif [ "x$1" = "x--gdbserver-port" ]; then |
| shift |
| GDBSERVER_PORT=$1 |
| shift |
| elif [ "x$1" = "x--gdbserver-bin" ]; then |
| shift |
| GDBSERVER_HOST=$1 |
| GDBSERVER_DEVICE=$1 |
| shift |
| elif [ "x$1" = "x--gdbserver" ]; then |
| USE_GDBSERVER="y" |
| DEV_MODE="y" |
| TIME_OUT="n" |
| shift |
| elif [ "x$1" = "x--gdb" ]; then |
| USE_GDB="y" |
| DEV_MODE="y" |
| TIME_OUT="n" |
| shift |
| elif [ "x$1" = "x--gdb-arg" ]; then |
| shift |
| gdb_arg="$1" |
| GDB_ARGS="${GDB_ARGS} $gdb_arg" |
| shift |
| elif [ "x$1" = "x--zygote" ]; then |
| ZYGOTE="-Xzygote" |
| msg "Spawning from zygote" |
| shift |
| elif [ "x$1" = "x--dev" ]; then |
| DEV_MODE="y" |
| shift |
| elif [ "x$1" = "x--interpreter" ]; then |
| INTERPRETER="y" |
| shift |
| elif [ "x$1" = "x--jit" ]; then |
| JIT="y" |
| shift |
| elif [ "x$1" = "x--baseline" ]; then |
| FLAGS="${FLAGS} -Xcompiler-option --baseline" |
| COMPILE_FLAGS="${COMPILE_FLAGS} --baseline" |
| shift |
| elif [ "x$1" = "x--jvm" ]; then |
| USE_JVM="y" |
| shift |
| elif [ "x$1" = "x--invoke-with" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --invoke-with" 1>&2 |
| exit 1 |
| fi |
| if [ "x$INVOKE_WITH" = "x" ]; then |
| INVOKE_WITH="$1" |
| else |
| INVOKE_WITH="$INVOKE_WITH $1" |
| fi |
| shift |
| elif [ "x$1" = "x--no-verify" ]; then |
| VERIFY="n" |
| shift |
| elif [ "x$1" = "x--verify-soft-fail" ]; then |
| VERIFY="s" |
| shift |
| elif [ "x$1" = "x--no-optimize" ]; then |
| OPTIMIZE="n" |
| shift |
| elif [ "x$1" = "x--chroot" ]; then |
| shift |
| CHROOT="$1" |
| shift |
| elif [ "x$1" = "x--android-root" ]; then |
| shift |
| ANDROID_ROOT="$1" |
| shift |
| elif [ "x$1" = "x--android-i18n-root" ]; then |
| shift |
| ANDROID_I18N_ROOT="$1" |
| shift |
| elif [ "x$1" = "x--android-art-root" ]; then |
| shift |
| ANDROID_ART_ROOT="$1" |
| shift |
| elif [ "x$1" = "x--android-tzdata-root" ]; then |
| shift |
| ANDROID_TZDATA_ROOT="$1" |
| shift |
| elif [ "x$1" = "x--instruction-set-features" ]; then |
| shift |
| INSTRUCTION_SET_FEATURES="$1" |
| shift |
| elif [ "x$1" = "x--timeout" ]; then |
| shift |
| TIME_OUT_VALUE="$1" |
| shift |
| elif [ "x$1" = "x--" ]; then |
| shift |
| break |
| elif [ "x$1" = "x--64" ]; then |
| SUFFIX64="64" |
| ISA="x86_64" |
| GDBSERVER_DEVICE="gdbserver64" |
| DALVIKVM="dalvikvm64" |
| LIBRARY_DIRECTORY="lib64" |
| TEST_DIRECTORY="nativetest64" |
| ARCHITECTURES_PATTERN="${ARCHITECTURES_64}" |
| GET_DEVICE_ISA_BITNESS_FLAG="--64" |
| DEX2OAT_NDEBUG_BINARY="dex2oat64" |
| DEX2OAT_DEBUG_BINARY="dex2oatd64" |
| shift |
| elif [ "x$1" = "x--experimental" ]; then |
| if [ "$#" -lt 2 ]; then |
| echo "missing --experimental option" 1>&2 |
| exit 1 |
| fi |
| EXPERIMENTAL="$EXPERIMENTAL $2" |
| shift 2 |
| elif [ "x$1" = "x--external-log-tags" ]; then |
| EXTERNAL_LOG_TAGS="y" |
| shift |
| elif [ "x$1" = "x--dry-run" ]; then |
| DRY_RUN="y" |
| shift |
| elif [ "x$1" = "x--vdex" ]; then |
| TEST_VDEX="y" |
| shift |
| elif [ "x$1" = "x--dm" ]; then |
| TEST_DM="y" |
| shift |
| elif [ "x$1" = "x--vdex-filter" ]; then |
| shift |
| option="$1" |
| VDEX_ARGS="${VDEX_ARGS} --compiler-filter=$option" |
| shift |
| elif [ "x$1" = "x--vdex-arg" ]; then |
| shift |
| VDEX_ARGS="${VDEX_ARGS} $1" |
| shift |
| elif [ "x$1" = "x--sync" ]; then |
| SYNC_BEFORE_RUN="y" |
| shift |
| elif [ "x$1" = "x--profile" ]; then |
| PROFILE="y" |
| shift |
| elif [ "x$1" = "x--random-profile" ]; then |
| RANDOM_PROFILE="y" |
| shift |
| elif expr "x$1" : "x--" >/dev/null 2>&1; then |
| echo "unknown $0 option: $1" 1>&2 |
| exit 1 |
| else |
| break |
| fi |
| done |
| |
| # HACK: Force the use of `signal_dumper` on host. |
| if [[ "$HOST" = "y" ]]; then |
| TIME_OUT="timeout" |
| fi |
| |
| # If you change this, update the timeout in testrunner.py as well. |
| if [ -z "$TIME_OUT_VALUE" ] ; then |
| # 10 minutes is the default. |
| TIME_OUT_VALUE=600 |
| |
| # For sanitized builds use a larger base. |
| # TODO: Consider sanitized target builds? |
| if [ "x$SANITIZE_HOST" != "x" ] ; then |
| TIME_OUT_VALUE=1500 # 25 minutes. |
| fi |
| |
| TIME_OUT_VALUE=$((${TIME_OUT_VALUE} + ${TIME_OUT_EXTRA})) |
| fi |
| |
| # Escape hatch for slow hosts or devices. Accept an environment variable as a timeout factor. |
| if [ ! -z "$ART_TIME_OUT_MULTIPLIER" ] ; then |
| TIME_OUT_VALUE=$((${TIME_OUT_VALUE} * ${ART_TIME_OUT_MULTIPLIER})) |
| fi |
| |
| # The DEX_LOCATION with the chroot prefix, if any. |
| CHROOT_DEX_LOCATION="$CHROOT$DEX_LOCATION" |
| |
| # If running on device, determine the ISA of the device. |
| if [ "$HOST" = "n" -a "$USE_JVM" = "n" ]; then |
| ISA=$("$ANDROID_BUILD_TOP/art/test/utils/get-device-isa" "$GET_DEVICE_ISA_BITNESS_FLAG") |
| fi |
| |
| if [ "$USE_JVM" = "n" ]; then |
| FLAGS="${FLAGS} ${ANDROID_FLAGS}" |
| # we don't want to be trying to get adbconnections since the plugin might |
| # not have been built. |
| FLAGS="${FLAGS} -XjdwpProvider:none" |
| for feature in ${EXPERIMENTAL}; do |
| FLAGS="${FLAGS} -Xexperimental:${feature} -Xcompiler-option --runtime-arg -Xcompiler-option -Xexperimental:${feature}" |
| COMPILE_FLAGS="${COMPILE_FLAGS} --runtime-arg -Xexperimental:${feature}" |
| done |
| fi |
| |
| if [ "$CREATE_ANDROID_ROOT" = "y" ]; then |
| ANDROID_ROOT=$DEX_LOCATION/android-root |
| fi |
| |
| if [ "x$1" = "x" ] ; then |
| MAIN="Main" |
| else |
| MAIN="$1" |
| shift |
| fi |
| |
| if [ "$ZYGOTE" = "" ]; then |
| if [ "$OPTIMIZE" = "y" ]; then |
| if [ "$VERIFY" = "y" ]; then |
| DEX_OPTIMIZE="-Xdexopt:verified" |
| else |
| DEX_OPTIMIZE="-Xdexopt:all" |
| fi |
| msg "Performing optimizations" |
| else |
| DEX_OPTIMIZE="-Xdexopt:none" |
| msg "Skipping optimizations" |
| fi |
| |
| if [ "$VERIFY" = "y" ]; then |
| JVM_VERIFY_ARG="-Xverify:all" |
| msg "Performing verification" |
| elif [ "$VERIFY" = "s" ]; then |
| JVM_VERIFY_ARG="Xverify:all" |
| DEX_VERIFY="-Xverify:softfail" |
| msg "Forcing verification to be soft fail" |
| else # VERIFY = "n" |
| DEX_VERIFY="-Xverify:none" |
| JVM_VERIFY_ARG="-Xverify:none" |
| msg "Skipping verification" |
| fi |
| fi |
| |
| msg "------------------------------" |
| |
| if [ "$DEBUGGER" = "y" ]; then |
| # Use this instead for ddms and connect by running 'ddms': |
| # DEBUGGER_OPTS="-XjdwpOptions=server=y,suspend=y -XjdwpProvider:adbconnection" |
| # TODO: add a separate --ddms option? |
| |
| PORT=12345 |
| msg "Waiting for jdb to connect:" |
| if [ "$HOST" = "n" ]; then |
| msg " adb forward tcp:$PORT tcp:$PORT" |
| fi |
| msg " jdb -attach localhost:$PORT" |
| if [ "$USE_JVM" = "n" ]; then |
| # Use the default libjdwp agent. Use --debug-agent to use a custom one. |
| DEBUGGER_OPTS="-agentpath:libjdwp.so=transport=dt_socket,address=$PORT,server=y,suspend=y -XjdwpProvider:internal" |
| else |
| DEBUGGER_OPTS="-agentlib:jdwp=transport=dt_socket,address=$PORT,server=y,suspend=y" |
| fi |
| elif [ "$DEBUGGER" = "agent" ]; then |
| PORT=12345 |
| # TODO Support ddms connection and support target. |
| if [ "$HOST" = "n" ]; then |
| echo "--debug-agent not supported yet for target!" |
| exit 1 |
| fi |
| AGENTPATH=${DEBUGGER_AGENT} |
| if [ "$WRAP_DEBUGGER_AGENT" = "y" ]; then |
| WRAPPROPS="${ANDROID_ROOT}/${LIBRARY_DIRECTORY}/libwrapagentpropertiesd.so" |
| if [ "$TEST_IS_NDEBUG" = "y" ]; then |
| WRAPPROPS="${ANDROID_ROOT}/${LIBRARY_DIRECTORY}/libwrapagentproperties.so" |
| fi |
| AGENTPATH="${WRAPPROPS}=${ANDROID_BUILD_TOP}/art/tools/libjdwp-compat.props,${AGENTPATH}" |
| fi |
| msg "Connect to localhost:$PORT" |
| DEBUGGER_OPTS="-agentpath:${AGENTPATH}=transport=dt_socket,address=$PORT,server=y,suspend=y" |
| fi |
| |
| for agent in "${WITH_AGENT[@]}"; do |
| FLAGS="${FLAGS} -agentpath:${agent}" |
| done |
| |
| if [ "$USE_JVMTI" = "y" ]; then |
| if [ "$USE_JVM" = "n" ]; then |
| plugin=libopenjdkjvmtid.so |
| if [[ "$TEST_IS_NDEBUG" = "y" ]]; then |
| plugin=libopenjdkjvmti.so |
| fi |
| # We used to add flags here that made the runtime debuggable but that is not |
| # needed anymore since the plugin can do it for us now. |
| FLAGS="${FLAGS} -Xplugin:${plugin}" |
| fi |
| fi |
| |
| # Add the libdir to the argv passed to the main function. |
| if [ "$ADD_LIBDIR_ARGUMENTS" = "y" ]; then |
| if [[ "$HOST" = "y" ]]; then |
| ARGS="${ARGS} ${ANDROID_HOST_OUT}/${TEST_DIRECTORY}/" |
| else |
| ARGS="${ARGS} /data/${TEST_DIRECTORY}/art/${ISA}/" |
| fi |
| fi |
| if [ "$IS_JVMTI_TEST" = "y" ]; then |
| agent=libtiagentd.so |
| lib=tiagentd |
| if [[ "$TEST_IS_NDEBUG" = "y" ]]; then |
| agent=libtiagent.so |
| lib=tiagent |
| fi |
| |
| ARGS="${ARGS} ${lib}" |
| if [[ "$USE_JVM" = "y" ]]; then |
| FLAGS="${FLAGS} -agentpath:${ANDROID_HOST_OUT}/nativetest64/${agent}=${TEST_NAME},jvm" |
| else |
| FLAGS="${FLAGS} -agentpath:${agent}=${TEST_NAME},art" |
| fi |
| fi |
| |
| if [[ "$JVMTI_STRESS" = "y" ]]; then |
| agent=libtistressd.so |
| if [[ "$TEST_IS_NDEBUG" = "y" ]]; then |
| agent=libtistress.so |
| fi |
| |
| # Just give it a default start so we can always add ',' to it. |
| agent_args="jvmti-stress" |
| if [[ "$JVMTI_REDEFINE_STRESS" = "y" ]]; then |
| # We really cannot do this on RI so don't both passing it in that case. |
| if [[ "$USE_JVM" = "n" ]]; then |
| agent_args="${agent_args},redefine" |
| fi |
| fi |
| if [[ "$JVMTI_FIELD_STRESS" = "y" ]]; then |
| agent_args="${agent_args},field" |
| fi |
| if [[ "$JVMTI_STEP_STRESS" = "y" ]]; then |
| agent_args="${agent_args},step" |
| fi |
| if [[ "$JVMTI_TRACE_STRESS" = "y" ]]; then |
| agent_args="${agent_args},trace" |
| fi |
| # In the future add onto this; |
| if [[ "$USE_JVM" = "y" ]]; then |
| FLAGS="${FLAGS} -agentpath:${ANDROID_HOST_OUT}/nativetest64/${agent}=${agent_args}" |
| else |
| FLAGS="${FLAGS} -agentpath:${agent}=${agent_args}" |
| fi |
| fi |
| |
| if [ "$USE_JVM" = "y" ]; then |
| export LD_LIBRARY_PATH=${ANDROID_HOST_OUT}/lib64 |
| # Some jvmti tests are flaky without -Xint on the RI. |
| if [ "$IS_JVMTI_TEST" = "y" ]; then |
| FLAGS="${FLAGS} -Xint" |
| fi |
| # Xmx is necessary since we don't pass down the ART flags to JVM. |
| # We pass the classes2 path whether it's used (src-multidex) or not. |
| cmdline="${JAVA} ${DEBUGGER_OPTS} ${JVM_VERIFY_ARG} -Xmx256m -classpath classes:classes2 ${FLAGS} $MAIN $@ ${ARGS}" |
| if [ "$DEV_MODE" = "y" ]; then |
| echo $cmdline |
| fi |
| if [ "$CREATE_RUNNER" = "y" ]; then |
| echo "#!/bin/bash" > runit.sh |
| echo "export LD_LIBRARY_PATH=\"$LD_LIBRARY_PATH\"" |
| echo $cmdline >> runit.sh |
| chmod u+x runit.sh |
| echo "Runnable test script written to $PWD/runit.sh" |
| else |
| $cmdline |
| fi |
| exit |
| fi |
| |
| # Note: This must start with the CORE_IMG_JARS in Android.common_path.mk |
| # because that's what we use for compiling the boot.art image. |
| # It may contain additional modules from TEST_CORE_JARS. |
| bpath_modules="core-oj core-libart okhttp bouncycastle apache-xml core-icu4j conscrypt" |
| bpath="" |
| bpath_locations="" |
| bpath_separator="" |
| bpath_prefix="" |
| bpath_location_prefix="" |
| if [ "${HOST}" = "y" ]; then |
| bpath_prefix="${ANDROID_HOST_OUT}" |
| if [ "${ANDROID_HOST_OUT:0:${#ANDROID_BUILD_TOP}+1}" = "${ANDROID_BUILD_TOP}/" ]; then |
| bpath_location_prefix="${ANDROID_HOST_OUT:${#ANDROID_BUILD_TOP}+1}" |
| else |
| echo "error: ANDROID_BUILD_TOP/ is not a prefix of ANDROID_HOST_OUT" |
| echo "ANDROID_BUILD_TOP=${ANDROID_BUILD_TOP}" |
| echo "ANDROID_HOST_OUT=${ANDROID_HOST_OUT}" |
| exit |
| fi |
| fi |
| for bpath_module in ${bpath_modules}; do |
| apex_module="com.android.art" |
| case "$bpath_module" in |
| (conscrypt) apex_module="com.android.conscrypt";; |
| (core-icu4j) apex_module="com.android.i18n";; |
| (*) apex_module="com.android.art";; |
| esac |
| bpath_jar="/apex/${apex_module}/javalib/${bpath_module}.jar" |
| bpath+="${bpath_separator}${bpath_prefix}${bpath_jar}" |
| bpath_locations+="${bpath_separator}${bpath_location_prefix}${bpath_jar}" |
| bpath_separator=":" |
| done |
| # Pass down the bootclasspath |
| FLAGS="${FLAGS} -Xbootclasspath:${bpath}" |
| FLAGS="${FLAGS} -Xbootclasspath-locations:${bpath_locations}" |
| COMPILE_FLAGS="${COMPILE_FLAGS} --runtime-arg -Xbootclasspath:${bpath}" |
| COMPILE_FLAGS="${COMPILE_FLAGS} --runtime-arg -Xbootclasspath-locations:${bpath_locations}" |
| |
| if [ "$HAVE_IMAGE" = "n" ]; then |
| # Disable image dex2oat - this will forbid the runtime to patch or compile an image. |
| FLAGS="${FLAGS} -Xnoimage-dex2oat" |
| |
| # We'll abuse a second flag here to test different behavior. If --relocate, use the |
| # existing image - relocation will fail as patching is disallowed. If --no-relocate, |
| # pass a non-existent image - compilation will fail as dex2oat is disallowed. |
| if [ "${RELOCATE}" = "y" ] ; then |
| DALVIKVM_BOOT_OPT="-Ximage:${BOOT_IMAGE}" |
| else |
| DALVIKVM_BOOT_OPT="-Ximage:/system/non-existent/boot.art" |
| fi |
| else |
| DALVIKVM_BOOT_OPT="-Ximage:${BOOT_IMAGE}" |
| fi |
| |
| |
| if [ "$USE_GDB" = "y" ]; then |
| if [ "$USE_GDBSERVER" = "y" ]; then |
| echo "Cannot pass both --gdb and --gdbserver at the same time!" >&2 |
| exit 1 |
| elif [ "$HOST" = "n" ]; then |
| # We might not have any hostname resolution if we are using a chroot. |
| GDB="$GDBSERVER_DEVICE --no-startup-with-shell 127.0.0.1$GDBSERVER_PORT" |
| else |
| if [ `uname` = "Darwin" ]; then |
| GDB=lldb |
| GDB_ARGS="$GDB_ARGS -- $DALVIKVM" |
| DALVIKVM= |
| else |
| GDB=gdb |
| GDB_ARGS="$GDB_ARGS --args $DALVIKVM" |
| # Enable for Emacs "M-x gdb" support. TODO: allow extra gdb arguments on command line. |
| # gdbargs="--annotate=3 $gdbargs" |
| fi |
| fi |
| elif [ "$USE_GDBSERVER" = "y" ]; then |
| if [ "$HOST" = "n" ]; then |
| # We might not have any hostname resolution if we are using a chroot. |
| GDB="$GDBSERVER_DEVICE --no-startup-with-shell 127.0.0.1$GDBSERVER_PORT" |
| else |
| GDB="$GDBSERVER_HOST $GDBSERVER_PORT" |
| fi |
| fi |
| |
| if [ "$INTERPRETER" = "y" ]; then |
| INT_OPTS="${INT_OPTS} -Xint" |
| fi |
| |
| if [ "$JIT" = "y" ]; then |
| INT_OPTS="${INT_OPTS} -Xusejit:true" |
| else |
| INT_OPTS="${INT_OPTS} -Xusejit:false" |
| fi |
| |
| if [ "$INTERPRETER" = "y" ] || [ "$JIT" = "y" ]; then |
| if [ "$VERIFY" = "y" ] ; then |
| INT_OPTS="${INT_OPTS} -Xcompiler-option --compiler-filter=verify" |
| COMPILE_FLAGS="${COMPILE_FLAGS} --compiler-filter=verify" |
| elif [ "$VERIFY" = "s" ]; then |
| INT_OPTS="${INT_OPTS} -Xcompiler-option --compiler-filter=extract" |
| COMPILE_FLAGS="${COMPILE_FLAGS} --compiler-filter=extract" |
| DEX_VERIFY="${DEX_VERIFY} -Xverify:softfail" |
| else # VERIFY = "n" |
| INT_OPTS="${INT_OPTS} -Xcompiler-option --compiler-filter=assume-verified" |
| COMPILE_FLAGS="${COMPILE_FLAGS} --compiler-filter=assume-verified" |
| DEX_VERIFY="${DEX_VERIFY} -Xverify:none" |
| fi |
| fi |
| |
| JNI_OPTS="-Xjnigreflimit:512 -Xcheck:jni" |
| |
| COMPILE_FLAGS="${COMPILE_FLAGS} --runtime-arg -Xnorelocate" |
| if [ "$RELOCATE" = "y" ]; then |
| FLAGS="${FLAGS} -Xrelocate" |
| else |
| FLAGS="$FLAGS -Xnorelocate" |
| fi |
| |
| if [ "$BIONIC" = "y" ]; then |
| # This is the location that soong drops linux_bionic builds. Despite being |
| # called linux_bionic-x86 the build is actually amd64 (x86_64) only. |
| if [ ! -e "$OUT_DIR/soong/host/linux_bionic-x86" ]; then |
| echo "linux_bionic-x86 target doesn't seem to have been built!" >&2 |
| exit 1 |
| fi |
| # Set TIMEOUT_DUMPER manually so it works even with apex's |
| TIMEOUT_DUMPER=$OUT_DIR/soong/host/linux_bionic-x86/bin/signal_dumper |
| fi |
| |
| # Prevent test from silently falling back to interpreter in no-prebuild mode. This happens |
| # when DEX_LOCATION path is too long, because vdex/odex filename is constructed by taking |
| # full path to dex, stripping leading '/', appending '@classes.vdex' and changing every |
| # remaining '/' into '@'. |
| if [ "$HOST" = "y" ]; then |
| max_filename_size=$(getconf NAME_MAX $DEX_LOCATION) |
| else |
| # There is no getconf on device, fallback to standard value. |
| # See NAME_MAX in kernel <linux/limits.h> |
| max_filename_size=255 |
| fi |
| # Compute VDEX_NAME. |
| DEX_LOCATION_STRIPPED="${DEX_LOCATION#/}" |
| VDEX_NAME="${DEX_LOCATION_STRIPPED//\//@}@$TEST_NAME.jar@classes.vdex" |
| if [ ${#VDEX_NAME} -gt $max_filename_size ]; then |
| echo "Dex location path too long:" |
| echo "$VDEX_NAME is ${#VDEX_NAME} character long, and the limit is $max_filename_size." |
| exit 1 |
| fi |
| |
| if [ "$HOST" = "y" ]; then |
| # On host, run binaries (`dex2oat(d)`, `dalvikvm`, `profman`) from the `bin` |
| # directory under the "Android Root" (usually `out/host/linux-x86`). |
| # |
| # TODO(b/130295968): Adjust this if/when ART host artifacts are installed |
| # under the ART root (usually `out/host/linux-x86/com.android.art`). |
| ANDROID_ART_BIN_DIR=$ANDROID_ROOT/bin |
| else |
| # On target, run binaries (`dex2oat(d)`, `dalvikvm`, `profman`) from the ART |
| # APEX's `bin` directory. This means the linker will observe the ART APEX |
| # linker configuration file (`/apex/com.android.art/etc/ld.config.txt`) for |
| # these binaries. |
| ANDROID_ART_BIN_DIR=$ANDROID_ART_ROOT/bin |
| fi |
| |
| profman_cmdline="true" |
| dex2oat_cmdline="true" |
| vdex_cmdline="true" |
| dm_cmdline="true" |
| mkdir_locations="${DEX_LOCATION}/dalvik-cache/$ISA" |
| strip_cmdline="true" |
| sync_cmdline="true" |
| linkroot_cmdline="true" |
| linkroot_overlay_cmdline="true" |
| setupapex_cmdline="true" |
| installapex_cmdline="true" |
| installapex_test_cmdline="true" |
| |
| linkdirs() { |
| find "$1" -maxdepth 1 -mindepth 1 -type d | xargs -i ln -sf '{}' "$2" |
| } |
| |
| if [ "$CREATE_ANDROID_ROOT" = "y" ]; then |
| mkdir_locations="${mkdir_locations} ${ANDROID_ROOT}" |
| linkroot_cmdline="linkdirs ${ANDROID_HOST_OUT} ${ANDROID_ROOT}" |
| if [ "${BIONIC}" = "y" ]; then |
| # TODO Make this overlay more generic. |
| linkroot_overlay_cmdline="linkdirs $OUT_DIR/soong/host/linux_bionic-x86 ${ANDROID_ROOT}" |
| fi |
| fi |
| |
| if [ "$USE_ZIPAPEX" = "y" ]; then |
| # TODO Currently this only works for linux_bionic zipapexes because those are |
| # stripped and so small enough that the ulimit doesn't kill us. |
| mkdir_locations="${mkdir_locations} $DEX_LOCATION/zipapex" |
| zip_options="-qq" |
| if [ "$DEV_MODE" = "y" ]; then |
| zip_options="" |
| fi |
| setupapex_cmdline="unzip -o -u ${zip_options} ${ZIPAPEX_LOC} apex_payload.zip -d ${DEX_LOCATION}" |
| installapex_cmdline="unzip -o -u ${zip_options} ${DEX_LOCATION}/apex_payload.zip -d ${DEX_LOCATION}/zipapex" |
| ANDROID_ART_BIN_DIR=$DEX_LOCATION/zipapex/bin |
| elif [ "$USE_EXTRACTED_ZIPAPEX" = "y" ]; then |
| # Just symlink the zipapex binaries |
| ANDROID_ART_BIN_DIR=$DEX_LOCATION/zipapex/bin |
| # Force since some tests manually run this file twice. |
| ln_options="" |
| if [ "$DEV_MODE" = "y" ]; then |
| ln_options="--verbose" |
| fi |
| # If the ${RUN} is executed multiple times we don't need to recreate the link |
| installapex_test_cmdline="test -L ${DEX_LOCATION}/zipapex" |
| installapex_cmdline="ln -s -f ${ln_options} ${EXTRACTED_ZIPAPEX_LOC} ${DEX_LOCATION}/zipapex" |
| fi |
| |
| # PROFILE takes precedence over RANDOM_PROFILE, since PROFILE tests require a |
| # specific profile to run properly. |
| if [ "$PROFILE" = "y" ] || [ "$RANDOM_PROFILE" = "y" ]; then |
| profman_cmdline="$ANDROID_ART_BIN_DIR/profman \ |
| --apk=$DEX_LOCATION/$TEST_NAME.jar \ |
| --dex-location=$DEX_LOCATION/$TEST_NAME.jar" |
| if [ -f "$TEST_NAME-ex.jar" ] && [ "$SECONDARY_COMPILATION" = "y" ] ; then |
| profman_cmdline="${profman_cmdline} \ |
| --apk=$DEX_LOCATION/$TEST_NAME-ex.jar \ |
| --dex-location=$DEX_LOCATION/$TEST_NAME-ex.jar" |
| fi |
| COMPILE_FLAGS="${COMPILE_FLAGS} --profile-file=$DEX_LOCATION/$TEST_NAME.prof" |
| FLAGS="${FLAGS} -Xcompiler-option --profile-file=$DEX_LOCATION/$TEST_NAME.prof" |
| if [ "$PROFILE" = "y" ]; then |
| profman_cmdline="${profman_cmdline} --create-profile-from=$DEX_LOCATION/profile \ |
| --reference-profile-file=$DEX_LOCATION/$TEST_NAME.prof" |
| else |
| profman_cmdline="${profman_cmdline} --generate-test-profile=$DEX_LOCATION/$TEST_NAME.prof \ |
| --generate-test-profile-seed=0" |
| fi |
| fi |
| |
| function write_dex2oat_cmdlines { |
| local name="$1" |
| |
| local class_loader_context="" |
| local enable_app_image=false |
| if [ "$APP_IMAGE" = "y" ]; then |
| enable_app_image=true |
| fi |
| |
| # If the name ends in -ex then this is a secondary dex file |
| if [ "${name:${#name}-3}" = "-ex" ]; then |
| # Lazily realize the default value in case DEX_LOCATION/TEST_NAME change |
| [ -z "$SECONDARY_CLASS_LOADER_CONTEXT" ] && SECONDARY_CLASS_LOADER_CONTEXT="PCL[];PCL[$DEX_LOCATION/$TEST_NAME.jar]" |
| class_loader_context="'--class-loader-context=$SECONDARY_CLASS_LOADER_CONTEXT'" |
| $enable_app_image && [ "$SECONDARY_APP_IMAGE" = "y" ] || enable_app_image=false |
| fi |
| |
| local app_image="" |
| $enable_app_image && app_image="--app-image-file=$DEX_LOCATION/oat/$ISA/$name.art --resolve-startup-const-strings=true" |
| |
| local dex2oat_binary |
| dex2oat_binary=${DEX2OAT_DEBUG_BINARY} |
| if [[ "$TEST_IS_NDEBUG" = "y" ]]; then |
| dex2oat_binary=${DEX2OAT_NDEBUG_BINARY} |
| fi |
| dex2oat_cmdline="$INVOKE_WITH $ANDROID_ART_BIN_DIR/$dex2oat_binary \ |
| $COMPILE_FLAGS \ |
| --boot-image=${BOOT_IMAGE} \ |
| --dex-file=$DEX_LOCATION/$name.jar \ |
| --oat-file=$DEX_LOCATION/oat/$ISA/$name.odex \ |
| "$app_image" \ |
| --generate-mini-debug-info \ |
| --instruction-set=$ISA \ |
| $class_loader_context" |
| if [ "x$INSTRUCTION_SET_FEATURES" != "x" ] ; then |
| dex2oat_cmdline="${dex2oat_cmdline} --instruction-set-features=${INSTRUCTION_SET_FEATURES}" |
| fi |
| |
| # Add in a timeout. This is important for testing the compilation/verification time of |
| # pathological cases. |
| # Note: as we don't know how decent targets are (e.g., emulator), only do this on the host for |
| # now. We should try to improve this. |
| # The current value is rather arbitrary. run-tests should compile quickly. |
| # Watchdog timeout is in milliseconds so add 3 '0's to the dex2oat timeout. |
| if [ "$HOST" != "n" ]; then |
| # Use SIGRTMIN+2 to try to dump threads. |
| # Use -k 1m to SIGKILL it a minute later if it hasn't ended. |
| dex2oat_cmdline="timeout -k ${DEX2OAT_TIMEOUT}s -s SIGRTMIN+2 ${DEX2OAT_RT_TIMEOUT}s ${dex2oat_cmdline} --watchdog-timeout=${DEX2OAT_TIMEOUT}000" |
| fi |
| if [ "$PROFILE" = "y" ] || [ "$RANDOM_PROFILE" = "y" ]; then |
| vdex_cmdline="${dex2oat_cmdline} ${VDEX_ARGS} --input-vdex=$DEX_LOCATION/oat/$ISA/$name.vdex --output-vdex=$DEX_LOCATION/oat/$ISA/$name.vdex" |
| elif [ "$TEST_VDEX" = "y" ]; then |
| if [ "$VDEX_ARGS" = "" ]; then |
| # If no arguments need to be passed, just delete the odex file so that the runtime only picks up the vdex file. |
| vdex_cmdline="rm $DEX_LOCATION/oat/$ISA/$name.odex" |
| else |
| vdex_cmdline="${dex2oat_cmdline} ${VDEX_ARGS} --input-vdex=$DEX_LOCATION/oat/$ISA/$name.vdex" |
| fi |
| elif [ "$TEST_DM" = "y" ]; then |
| dex2oat_cmdline="${dex2oat_cmdline} --copy-dex-files=false --output-vdex=$DEX_LOCATION/oat/$ISA/primary.vdex" |
| dm_cmdline="zip -qj $DEX_LOCATION/oat/$ISA/$name.dm $DEX_LOCATION/oat/$ISA/primary.vdex" |
| vdex_cmdline="${dex2oat_cmdline} ${VDEX_ARGS} --dump-timings --dm-file=$DEX_LOCATION/oat/$ISA/$name.dm" |
| fi |
| } |
| |
| # Enable mini-debug-info for JIT (if JIT is used). |
| FLAGS="$FLAGS -Xcompiler-option --generate-mini-debug-info" |
| |
| if [ "$PREBUILD" = "y" ]; then |
| mkdir_locations="${mkdir_locations} ${DEX_LOCATION}/oat/$ISA" |
| |
| # "Primary". |
| write_dex2oat_cmdlines "$TEST_NAME" |
| dex2oat_cmdline=$(echo $dex2oat_cmdline) |
| dm_cmdline=$(echo $dm_cmdline) |
| vdex_cmdline=$(echo $vdex_cmdline) |
| |
| # Enable mini-debug-info for JIT (if JIT is used). |
| FLAGS="$FLAGS -Xcompiler-option --generate-mini-debug-info" |
| |
| if [ -f "$TEST_NAME-ex.jar" ] && [ "$SECONDARY_COMPILATION" = "y" ] ; then |
| # "Secondary" for test coverage. |
| |
| # Store primary values. |
| base_dex2oat_cmdline="$dex2oat_cmdline" |
| base_dm_cmdline="$dm_cmdline" |
| base_vdex_cmdline="$vdex_cmdline" |
| |
| write_dex2oat_cmdlines "$TEST_NAME-ex" |
| dex2oat_cmdline=$(echo $dex2oat_cmdline) |
| dm_cmdline=$(echo $dm_cmdline) |
| vdex_cmdline=$(echo $vdex_cmdline) |
| |
| # Concatenate. |
| dex2oat_cmdline="$base_dex2oat_cmdline && $dex2oat_cmdline" |
| dm_cmdline="$base_dm_cmdline" # Only use primary dm. |
| vdex_cmdline="$base_vdex_cmdline && $vdex_cmdline" |
| fi |
| fi |
| |
| if [ "$SYNC_BEFORE_RUN" = "y" ]; then |
| sync_cmdline="sync" |
| fi |
| |
| DALVIKVM_ISA_FEATURES_ARGS="" |
| if [ "x$INSTRUCTION_SET_FEATURES" != "x" ] ; then |
| DALVIKVM_ISA_FEATURES_ARGS="-Xcompiler-option --instruction-set-features=${INSTRUCTION_SET_FEATURES}" |
| fi |
| |
| # java.io.tmpdir can only be set at launch time. |
| TMP_DIR_OPTION="" |
| if [ "$HOST" = "n" ]; then |
| TMP_DIR_OPTION="-Djava.io.tmpdir=/data/local/tmp" |
| fi |
| |
| # The build servers have an ancient version of bash so we cannot use @Q. |
| if [ "$USE_GDBSERVER" == "y" ]; then |
| printf -v QUOTED_DALVIKVM_BOOT_OPT "%q" "$DALVIKVM_BOOT_OPT" |
| else |
| QUOTED_DALVIKVM_BOOT_OPT="$DALVIKVM_BOOT_OPT" |
| fi |
| |
| # We set DumpNativeStackOnSigQuit to false to avoid stressing libunwind. |
| # b/27185632 |
| # b/24664297 |
| dalvikvm_cmdline="$INVOKE_WITH $GDB $ANDROID_ART_BIN_DIR/$DALVIKVM \ |
| $GDB_ARGS \ |
| $FLAGS \ |
| $DEX_VERIFY \ |
| -XXlib:$LIB \ |
| $DEX2OAT \ |
| $DALVIKVM_ISA_FEATURES_ARGS \ |
| $ZYGOTE \ |
| $JNI_OPTS \ |
| $INT_OPTS \ |
| $DEBUGGER_OPTS \ |
| ${QUOTED_DALVIKVM_BOOT_OPT} \ |
| $TMP_DIR_OPTION \ |
| -XX:DumpNativeStackOnSigQuit:false \ |
| -cp $DEX_LOCATION/$TEST_NAME.jar$SECONDARY_DEX $MAIN $ARGS" |
| |
| sanitize_dex2oat_cmdline() { |
| local args=() |
| for arg in "$@"; do |
| if [ "$arg" = "--class-loader-context=&" ]; then |
| arg="--class-loader-context=\&" |
| fi |
| args+=("$arg") |
| done |
| echo -n "${args[@]}" |
| } |
| |
| # Remove whitespace. |
| dex2oat_cmdline=$(sanitize_dex2oat_cmdline $(echo $dex2oat_cmdline)) |
| dalvikvm_cmdline=$(echo $dalvikvm_cmdline) |
| dm_cmdline=$(echo $dm_cmdline) |
| vdex_cmdline=$(sanitize_dex2oat_cmdline $(echo $vdex_cmdline)) |
| profman_cmdline=$(echo $profman_cmdline) |
| |
| # Use an empty ASAN_OPTIONS to enable defaults. |
| # Note: this is required as envsetup right now exports detect_leaks=0. |
| RUN_TEST_ASAN_OPTIONS="" |
| |
| # Multiple shutdown leaks. b/38341789 |
| if [ "x$RUN_TEST_ASAN_OPTIONS" != "x" ] ; then |
| RUN_TEST_ASAN_OPTIONS="${RUN_TEST_ASAN_OPTIONS}:" |
| fi |
| RUN_TEST_ASAN_OPTIONS="${RUN_TEST_ASAN_OPTIONS}detect_leaks=0" |
| |
| # For running, we must turn off logging when dex2oat is missing. Otherwise we use |
| # the same defaults as for prebuilt: everything when --dev, otherwise errors and above only. |
| if [ "$EXTERNAL_LOG_TAGS" = "n" ]; then |
| if [ "$DEV_MODE" = "y" ]; then |
| export ANDROID_LOG_TAGS='*:d' |
| elif [ "$HAVE_IMAGE" = "n" ]; then |
| # All tests would log the error of missing image. Be silent here and only log fatal |
| # events. |
| export ANDROID_LOG_TAGS='*:s' |
| else |
| # We are interested in LOG(ERROR) output. |
| export ANDROID_LOG_TAGS='*:e' |
| fi |
| fi |
| |
| if [ "$HOST" = "n" ]; then |
| adb root > /dev/null |
| adb wait-for-device |
| if [ "$QUIET" = "n" ]; then |
| adb shell rm -rf $CHROOT_DEX_LOCATION |
| adb shell mkdir -p $CHROOT_DEX_LOCATION |
| adb push $TEST_NAME.jar $CHROOT_DEX_LOCATION |
| adb push $TEST_NAME-ex.jar $CHROOT_DEX_LOCATION |
| if [ "$PROFILE" = "y" ] || [ "$RANDOM_PROFILE" = "y" ]; then |
| adb push profile $CHROOT_DEX_LOCATION |
| fi |
| # Copy resource folder |
| if [ -d res ]; then |
| adb push res $CHROOT_DEX_LOCATION |
| fi |
| else |
| adb shell rm -rf $CHROOT_DEX_LOCATION >/dev/null 2>&1 |
| adb shell mkdir -p $CHROOT_DEX_LOCATION >/dev/null 2>&1 |
| adb push $TEST_NAME.jar $CHROOT_DEX_LOCATION >/dev/null 2>&1 |
| adb push $TEST_NAME-ex.jar $CHROOT_DEX_LOCATION >/dev/null 2>&1 |
| if [ "$PROFILE" = "y" ] || [ "$RANDOM_PROFILE" = "y" ]; then |
| adb push profile $CHROOT_DEX_LOCATION >/dev/null 2>&1 |
| fi |
| # Copy resource folder |
| if [ -d res ]; then |
| adb push res $CHROOT_DEX_LOCATION >/dev/null 2>&1 |
| fi |
| fi |
| |
| # Populate LD_LIBRARY_PATH. |
| LD_LIBRARY_PATH= |
| if [ "$ANDROID_ROOT" != "/system" ]; then |
| # Current default installation is dalvikvm 64bits and dex2oat 32bits, |
| # so we can only use LD_LIBRARY_PATH when testing on a local |
| # installation. |
| LD_LIBRARY_PATH="$ANDROID_ROOT/$LIBRARY_DIRECTORY" |
| fi |
| |
| # This adds libarttest(d).so to the default linker namespace when dalvikvm |
| # is run from /apex/com.android.art/bin. Since that namespace is essentially |
| # an alias for the com_android_art namespace, that gives libarttest(d).so |
| # full access to the internal ART libraries. |
| LD_LIBRARY_PATH="/data/$TEST_DIRECTORY/com.android.art/lib${SUFFIX64}:$LD_LIBRARY_PATH" |
| if [ "$TEST_IS_NDEBUG" = "y" ]; then dlib=""; else dlib="d"; fi |
| art_test_internal_libraries=( |
| libartagent${dlib}.so |
| libarttest${dlib}.so |
| libtiagent${dlib}.so |
| libtistress${dlib}.so |
| ) |
| art_test_internal_libraries="${art_test_internal_libraries[*]}" |
| NATIVELOADER_DEFAULT_NAMESPACE_LIBS="${art_test_internal_libraries// /:}" |
| dlib= |
| art_test_internal_libraries= |
| |
| # Needed to access the test's Odex files. |
| LD_LIBRARY_PATH="$DEX_LOCATION/oat/$ISA:$LD_LIBRARY_PATH" |
| # Needed to access the test's native libraries (see e.g. 674-hiddenapi, |
| # which generates `libhiddenapitest_*.so` libraries in `$DEX_LOCATION`). |
| LD_LIBRARY_PATH="$DEX_LOCATION:$LD_LIBRARY_PATH" |
| |
| # System libraries needed by libarttestd.so |
| PUBLIC_LIBS=libc++.so:libbacktrace.so:libbase.so:libnativehelper.so |
| if [ "$TEST_IS_NDEBUG" = "y" ]; then |
| PUBLIC_LIBS=$PUBLIC_LIBS:libart.so:libdexfile.so:libprofile.so:libartbase.so |
| else |
| PUBLIC_LIBS=$PUBLIC_LIBS:libartd.so:libdexfiled.so:libprofiled.so:libartbased.so |
| fi |
| |
| # Prepend directories to the path on device. |
| PREPEND_TARGET_PATH=$ANDROID_ART_BIN_DIR |
| if [ "$ANDROID_ROOT" != "/system" ]; then |
| PREPEND_TARGET_PATH="$PREPEND_TARGET_PATH:$ANDROID_ROOT/bin" |
| fi |
| |
| timeout_dumper_cmd= |
| |
| # Check whether signal_dumper is available. |
| if [ "$TIMEOUT_DUMPER" = signal_dumper ] ; then |
| # Chroot? Use as prefix for tests. |
| TIMEOUT_DUMPER_PATH_PREFIX= |
| if [ -n "$CHROOT" ]; then |
| TIMEOUT_DUMPER_PATH_PREFIX="$CHROOT/" |
| fi |
| |
| # Testing APEX? |
| if adb shell "test -x ${TIMEOUT_DUMPER_PATH_PREFIX}/apex/com.android.art/bin/signal_dumper" ; then |
| TIMEOUT_DUMPER="/apex/com.android.art/bin/signal_dumper" |
| # Is it in /system/bin? |
| elif adb shell "test -x ${TIMEOUT_DUMPER_PATH_PREFIX}/system/bin/signal_dumper" ; then |
| TIMEOUT_DUMPER="/system/bin/signal_dumper" |
| else |
| TIMEOUT_DUMPER= |
| fi |
| else |
| TIMEOUT_DUMPER= |
| fi |
| |
| if [ ! -z "$TIMEOUT_DUMPER" ] ; then |
| # Use "-l" to dump to logcat. That is convenience for the build bot crash symbolization. |
| # Use exit code 124 for toybox timeout (b/141007616). |
| timeout_dumper_cmd="${TIMEOUT_DUMPER} -l -s 15 -e 124" |
| fi |
| |
| timeout_prefix= |
| if [ "$TIME_OUT" = "timeout" ]; then |
| # Add timeout command if time out is desired. |
| # |
| # Note: We first send SIGTERM (the timeout default, signal 15) to the signal dumper, which |
| # will induce a full thread dump before killing the process. To ensure any issues in |
| # dumping do not lead to a deadlock, we also use the "-k" option to definitely kill the |
| # child. |
| # Note: Using "--foreground" to not propagate the signal to children, i.e., the runtime. |
| timeout_prefix="timeout --foreground -k 120s ${TIME_OUT_VALUE}s ${timeout_dumper_cmd} $cmdline" |
| fi |
| |
| # Create a script with the command. The command can get longer than the longest |
| # allowed adb command and there is no way to get the exit status from a adb shell |
| # command. Dalvik cache is cleaned before running to make subsequent executions |
| # of the script follow the same runtime path. |
| cmdline="cd $DEX_LOCATION && \ |
| export ASAN_OPTIONS=$RUN_TEST_ASAN_OPTIONS && \ |
| export ANDROID_DATA=$DEX_LOCATION && \ |
| export ANDROID_ADDITIONAL_PUBLIC_LIBRARIES=$PUBLIC_LIBS && \ |
| export DEX_LOCATION=$DEX_LOCATION && \ |
| export ANDROID_ROOT=$ANDROID_ROOT && \ |
| export ANDROID_I18N_ROOT=$ANDROID_I18N_ROOT && \ |
| export ANDROID_ART_ROOT=$ANDROID_ART_ROOT && \ |
| export ANDROID_TZDATA_ROOT=$ANDROID_TZDATA_ROOT && \ |
| export ANDROID_LOG_TAGS=$ANDROID_LOG_TAGS && \ |
| rm -rf ${DEX_LOCATION}/dalvik-cache/ && \ |
| mkdir -p ${mkdir_locations} && \ |
| export LD_LIBRARY_PATH=$LD_LIBRARY_PATH && \ |
| export NATIVELOADER_DEFAULT_NAMESPACE_LIBS=$NATIVELOADER_DEFAULT_NAMESPACE_LIBS && \ |
| export PATH=$PREPEND_TARGET_PATH:\$PATH && \ |
| $profman_cmdline && \ |
| $dex2oat_cmdline && \ |
| $dm_cmdline && \ |
| $vdex_cmdline && \ |
| $strip_cmdline && \ |
| $sync_cmdline && \ |
| $timeout_prefix $dalvikvm_cmdline" |
| |
| cmdfile=$(mktemp cmd-XXXX --suffix "-$TEST_NAME") |
| echo "$cmdline" >> $cmdfile |
| |
| if [ "$DEV_MODE" = "y" ]; then |
| echo $cmdline |
| if [ "$USE_GDB" = "y" ] || [ "$USE_GDBSERVER" = "y" ]; then |
| echo "Forward ${GDBSERVER_PORT} to local port and connect GDB" |
| fi |
| fi |
| |
| if [ "$QUIET" = "n" ]; then |
| adb push $cmdfile $CHROOT_DEX_LOCATION/cmdline.sh |
| else |
| adb push $cmdfile $CHROOT_DEX_LOCATION/cmdline.sh >/dev/null 2>&1 |
| fi |
| |
| exit_status=0 |
| if [ "$DRY_RUN" != "y" ]; then |
| if [ -n "$CHROOT" ]; then |
| adb shell chroot "$CHROOT" sh $DEX_LOCATION/cmdline.sh |
| else |
| adb shell sh $DEX_LOCATION/cmdline.sh |
| fi |
| exit_status=$? |
| fi |
| |
| rm -f $cmdfile |
| exit $exit_status |
| else |
| # Host run. |
| export ANDROID_PRINTF_LOG=brief |
| |
| export ANDROID_DATA="$DEX_LOCATION" |
| export ANDROID_ROOT="${ANDROID_ROOT}" |
| export ANDROID_I18N_ROOT="${ANDROID_I18N_ROOT}" |
| export ANDROID_ART_ROOT="${ANDROID_ART_ROOT}" |
| export ANDROID_TZDATA_ROOT="${ANDROID_TZDATA_ROOT}" |
| if [ "$USE_ZIPAPEX" = "y" ] || [ "$USE_EXRACTED_ZIPAPEX" = "y" ]; then |
| # Put the zipapex files in front of the ld-library-path |
| export LD_LIBRARY_PATH="${ANDROID_DATA}/zipapex/${LIBRARY_DIRECTORY}:${ANDROID_ROOT}/${TEST_DIRECTORY}" |
| export DYLD_LIBRARY_PATH="${ANDROID_DATA}/zipapex/${LIBRARY_DIRECTORY}:${ANDROID_ROOT}/${TEST_DIRECTORY}" |
| else |
| export LD_LIBRARY_PATH="${ANDROID_ROOT}/${LIBRARY_DIRECTORY}:${ANDROID_ROOT}/${TEST_DIRECTORY}" |
| export DYLD_LIBRARY_PATH="${ANDROID_ROOT}/${LIBRARY_DIRECTORY}:${ANDROID_ROOT}/${TEST_DIRECTORY}" |
| fi |
| export PATH="$PATH:$ANDROID_ART_BIN_DIR" |
| |
| # Temporarily disable address space layout randomization (ASLR). |
| # This is needed on the host so that the linker loads core.oat at the necessary address. |
| export LD_USE_LOAD_BIAS=1 |
| |
| cmdline="$dalvikvm_cmdline" |
| |
| if [ "$TIME_OUT" = "gdb" ]; then |
| if [ `uname` = "Darwin" ]; then |
| # Fall back to timeout on Mac. |
| TIME_OUT="timeout" |
| elif [ "$ISA" = "x86" ]; then |
| # prctl call may fail in 32-bit on an older (3.2) 64-bit Linux kernel. Fall back to timeout. |
| TIME_OUT="timeout" |
| else |
| # Check if gdb is available. |
| gdb --eval-command="quit" > /dev/null 2>&1 |
| if [ $? != 0 ]; then |
| # gdb isn't available. Fall back to timeout. |
| TIME_OUT="timeout" |
| fi |
| fi |
| fi |
| |
| if [ "$TIME_OUT" = "timeout" ]; then |
| # Add timeout command if time out is desired. |
| # |
| # Note: We first send SIGTERM (the timeout default, signal 15) to the signal dumper, which |
| # will induce a full thread dump before killing the process. To ensure any issues in |
| # dumping do not lead to a deadlock, we also use the "-k" option to definitely kill the |
| # child. |
| # Note: Using "--foreground" to not propagate the signal to children, i.e., the runtime. |
| cmdline="timeout --foreground -k 120s ${TIME_OUT_VALUE}s ${TIMEOUT_DUMPER} -s 15 $cmdline" |
| fi |
| |
| if [ "$DEV_MODE" = "y" ]; then |
| for var in ANDROID_PRINTF_LOG ANDROID_DATA ANDROID_ROOT ANDROID_I18N_ROOT ANDROID_TZDATA_ROOT ANDROID_ART_ROOT LD_LIBRARY_PATH DYLD_LIBRARY_PATH PATH LD_USE_LOAD_BIAS; do |
| echo EXPORT $var=${!var} |
| done |
| echo "$(declare -f linkdirs)" |
| echo "mkdir -p ${mkdir_locations} && $setupapex_cmdline && ( $installapex_test_cmdline || $installapex_cmdline ) && $linkroot_cmdline && $linkroot_overlay_cmdline && $profman_cmdline && $dex2oat_cmdline && $dm_cmdline && $vdex_cmdline && $strip_cmdline && $sync_cmdline && $cmdline" |
| fi |
| |
| cd $ANDROID_BUILD_TOP |
| |
| # Make sure we delete any existing compiler artifacts. |
| # This enables tests to call the RUN script multiple times in a row |
| # without worrying about interference. |
| rm -rf ${DEX_LOCATION}/oat |
| rm -rf ${DEX_LOCATION}/dalvik-cache/ |
| |
| export ASAN_OPTIONS=$RUN_TEST_ASAN_OPTIONS |
| |
| mkdir -p ${mkdir_locations} || exit 1 |
| $setupapex_cmdline || { echo "zipapex extraction failed." >&2 ; exit 2; } |
| $installapex_test_cmdline || $installapex_cmdline || { echo "zipapex install failed. cmd was: ${installapex_test_cmdline} || ${installapex_cmdline}." >&2; find ${mkdir_locations} -type f >&2; exit 2; } |
| $linkroot_cmdline || { echo "create symlink android-root failed." >&2 ; exit 2; } |
| $linkroot_overlay_cmdline || { echo "overlay android-root failed." >&2 ; exit 2; } |
| $profman_cmdline || { echo "Profman failed." >&2 ; exit 2; } |
| eval "$dex2oat_cmdline" || { echo "Dex2oat failed." >&2 ; exit 2; } |
| eval "$dm_cmdline" || { echo "Dex2oat failed." >&2 ; exit 2; } |
| eval "$vdex_cmdline" || { echo "Dex2oat failed." >&2 ; exit 2; } |
| $strip_cmdline || { echo "Strip failed." >&2 ; exit 3; } |
| $sync_cmdline || { echo "Sync failed." >&2 ; exit 4; } |
| |
| if [ "$CREATE_RUNNER" = "y" ]; then |
| echo "#!/bin/bash" > ${DEX_LOCATION}/runit.sh |
| for var in ANDROID_PRINTF_LOG ANDROID_DATA ANDROID_ROOT ANDROID_I18N_ROOT ANDROID_TZDATA_ROOT ANDROID_ART_ROOT LD_LIBRARY_PATH DYLD_LIBRARY_PATH PATH LD_USE_LOAD_BIAS; do |
| echo export $var="${!var}" >> ${DEX_LOCATION}/runit.sh |
| done |
| if [ "$DEV_MODE" = "y" ]; then |
| echo $cmdline >> ${DEX_LOCATION}/runit.sh |
| else |
| echo 'STDERR=$(mktemp)' >> ${DEX_LOCATION}/runit.sh |
| echo 'STDOUT=$(mktemp)' >> ${DEX_LOCATION}/runit.sh |
| echo $cmdline '>${STDOUT} 2>${STDERR}' >> ${DEX_LOCATION}/runit.sh |
| echo 'if diff ${STDOUT} $ANDROID_DATA/expected-stdout.txt; then' \ |
| >> ${DEX_LOCATION}/runit.sh |
| echo ' rm -f ${STDOUT} ${STDERR}' >> ${DEX_LOCATION}/runit.sh |
| echo ' exit 0' >> ${DEX_LOCATION}/runit.sh |
| echo 'elif diff ${STDERR} $ANDROID_DATA/expected-stderr.txt; then' \ |
| >> ${DEX_LOCATION}/runit.sh |
| echo ' rm -f ${STDOUT} ${STDERR}' >> ${DEX_LOCATION}/runit.sh |
| echo ' exit 0' >> ${DEX_LOCATION}/runit.sh |
| echo 'else' >> ${DEX_LOCATION}/runit.sh |
| echo ' echo STDOUT:' >> ${DEX_LOCATION}/runit.sh |
| echo ' cat ${STDOUT}' >> ${DEX_LOCATION}/runit.sh |
| echo ' echo STDERR:' >> ${DEX_LOCATION}/runit.sh |
| echo ' cat ${STDERR}' >> ${DEX_LOCATION}/runit.sh |
| echo ' rm -f ${STDOUT} ${STDERR}' >> ${DEX_LOCATION}/runit.sh |
| echo ' exit 1' >> ${DEX_LOCATION}/runit.sh |
| echo 'fi' >> ${DEX_LOCATION}/runit.sh |
| fi |
| chmod u+x $DEX_LOCATION/runit.sh |
| echo "Runnable test script written to ${DEX_LOCATION}/runit.sh" |
| fi |
| if [ "$DRY_RUN" = "y" ]; then |
| exit 0 |
| fi |
| |
| if [ "$USE_GDB" = "y" ]; then |
| # When running under gdb, we cannot do piping and grepping... |
| $cmdline "$@" |
| elif [ "$USE_GDBSERVER" = "y" ]; then |
| echo "Connect to $GDBSERVER_PORT" |
| # When running under gdb, we cannot do piping and grepping... |
| $cmdline "$@" |
| else |
| if [ "$TIME_OUT" != "gdb" ]; then |
| trap 'kill -INT -$pid' INT |
| $cmdline "$@" & pid=$! |
| wait $pid |
| exit_value=$? |
| # Add extra detail if time out is enabled. |
| if [ $exit_value = 124 ] && [ "$TIME_OUT" = "timeout" ]; then |
| echo -e "\e[91mTEST TIMED OUT!\e[0m" >&2 |
| fi |
| exit $exit_value |
| else |
| # With a thread dump that uses gdb if a timeout. |
| trap 'kill -INT -$pid' INT |
| $cmdline "$@" & pid=$! |
| # Spawn a watcher process. |
| ( sleep $TIME_OUT_VALUE && \ |
| echo "##### Thread dump using gdb on test timeout" && \ |
| ( gdb -q -p $pid --eval-command="info thread" --eval-command="thread apply all bt" \ |
| --eval-command="call exit(124)" --eval-command=quit || \ |
| kill $pid )) 2> /dev/null & watcher=$! |
| wait $pid |
| test_exit_status=$? |
| pkill -P $watcher 2> /dev/null # kill the sleep which will in turn end the watcher as well |
| if [ $test_exit_status = 0 ]; then |
| # The test finished normally. |
| exit 0 |
| else |
| # The test failed or timed out. |
| if [ $test_exit_status = 124 ]; then |
| # The test timed out. |
| echo -e "\e[91mTEST TIMED OUT!\e[0m" >&2 |
| fi |
| exit $test_exit_status |
| fi |
| fi |
| fi |
| fi |