| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "zip_archive.h" |
| |
| #include <vector> |
| |
| #include <fcntl.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| |
| #include "base/unix_file/fd_file.h" |
| #include "UniquePtr.h" |
| |
| namespace art { |
| |
| static const size_t kBufSize = 32 * KB; |
| |
| // Get 2 little-endian bytes. |
| static uint32_t Le16ToHost(const byte* src) { |
| return ((src[0] << 0) | |
| (src[1] << 8)); |
| } |
| |
| // Get 4 little-endian bytes. |
| static uint32_t Le32ToHost(const byte* src) { |
| return ((src[0] << 0) | |
| (src[1] << 8) | |
| (src[2] << 16) | |
| (src[3] << 24)); |
| } |
| |
| uint16_t ZipEntry::GetCompressionMethod() { |
| return Le16ToHost(ptr_ + ZipArchive::kCDEMethod); |
| } |
| |
| uint32_t ZipEntry::GetCompressedLength() { |
| return Le32ToHost(ptr_ + ZipArchive::kCDECompLen); |
| } |
| |
| uint32_t ZipEntry::GetUncompressedLength() { |
| return Le32ToHost(ptr_ + ZipArchive::kCDEUncompLen); |
| } |
| |
| uint32_t ZipEntry::GetCrc32() { |
| return Le32ToHost(ptr_ + ZipArchive::kCDECRC); |
| } |
| |
| off_t ZipEntry::GetDataOffset() { |
| // All we have is the offset to the Local File Header, which is |
| // variable size, so we have to read the contents of the struct to |
| // figure out where the actual data starts. |
| |
| // We also need to make sure that the lengths are not so large that |
| // somebody trying to map the compressed or uncompressed data runs |
| // off the end of the mapped region. |
| |
| off_t dir_offset = zip_archive_->dir_offset_; |
| int64_t lfh_offset = Le32ToHost(ptr_ + ZipArchive::kCDELocalOffset); |
| if (lfh_offset + ZipArchive::kLFHLen >= dir_offset) { |
| LOG(WARNING) << "Zip: bad LFH offset in zip"; |
| return -1; |
| } |
| |
| if (lseek(zip_archive_->fd_, lfh_offset, SEEK_SET) != lfh_offset) { |
| PLOG(WARNING) << "Zip: failed seeking to LFH at offset " << lfh_offset; |
| return -1; |
| } |
| |
| uint8_t lfh_buf[ZipArchive::kLFHLen]; |
| ssize_t actual = TEMP_FAILURE_RETRY(read(zip_archive_->fd_, lfh_buf, sizeof(lfh_buf))); |
| if (actual != sizeof(lfh_buf)) { |
| LOG(WARNING) << "Zip: failed reading LFH from offset " << lfh_offset; |
| return -1; |
| } |
| |
| if (Le32ToHost(lfh_buf) != ZipArchive::kLFHSignature) { |
| LOG(WARNING) << "Zip: didn't find signature at start of LFH, offset " << lfh_offset; |
| return -1; |
| } |
| |
| off_t data_offset = (lfh_offset + ZipArchive::kLFHLen |
| + Le16ToHost(lfh_buf + ZipArchive::kLFHNameLen) |
| + Le16ToHost(lfh_buf + ZipArchive::kLFHExtraLen)); |
| if (data_offset >= dir_offset) { |
| LOG(WARNING) << "Zip: bad data offset " << data_offset << " in zip"; |
| return -1; |
| } |
| |
| // check lengths |
| |
| if (static_cast<off_t>(data_offset + GetCompressedLength()) > dir_offset) { |
| LOG(WARNING) << "Zip: bad compressed length in zip " |
| << "(" << data_offset << " + " << GetCompressedLength() |
| << " > " << dir_offset << ")"; |
| return -1; |
| } |
| |
| if (GetCompressionMethod() == kCompressStored |
| && static_cast<off_t>(data_offset + GetUncompressedLength()) > dir_offset) { |
| LOG(WARNING) << "Zip: bad uncompressed length in zip " |
| << "(" << data_offset << " + " << GetUncompressedLength() |
| << " > " << dir_offset << ")"; |
| return -1; |
| } |
| |
| return data_offset; |
| } |
| |
| static bool CopyFdToMemory(uint8_t* begin, size_t size, int in, size_t count) { |
| uint8_t* dst = begin; |
| std::vector<uint8_t> buf(kBufSize); |
| while (count != 0) { |
| size_t bytes_to_read = (count > kBufSize) ? kBufSize : count; |
| ssize_t actual = TEMP_FAILURE_RETRY(read(in, &buf[0], bytes_to_read)); |
| if (actual != static_cast<ssize_t>(bytes_to_read)) { |
| PLOG(WARNING) << "Zip: short read"; |
| return false; |
| } |
| memcpy(dst, &buf[0], bytes_to_read); |
| dst += bytes_to_read; |
| count -= bytes_to_read; |
| } |
| DCHECK_EQ(dst, begin + size); |
| return true; |
| } |
| |
| class ZStream { |
| public: |
| ZStream(byte* write_buf, size_t write_buf_size) { |
| // Initialize the zlib stream struct. |
| memset(&zstream_, 0, sizeof(zstream_)); |
| zstream_.zalloc = Z_NULL; |
| zstream_.zfree = Z_NULL; |
| zstream_.opaque = Z_NULL; |
| zstream_.next_in = NULL; |
| zstream_.avail_in = 0; |
| zstream_.next_out = reinterpret_cast<Bytef*>(write_buf); |
| zstream_.avail_out = write_buf_size; |
| zstream_.data_type = Z_UNKNOWN; |
| } |
| |
| z_stream& Get() { |
| return zstream_; |
| } |
| |
| ~ZStream() { |
| inflateEnd(&zstream_); |
| } |
| private: |
| z_stream zstream_; |
| }; |
| |
| static bool InflateToMemory(uint8_t* begin, size_t size, |
| int in, size_t uncompressed_length, size_t compressed_length) { |
| uint8_t* dst = begin; |
| UniquePtr<uint8_t[]> read_buf(new uint8_t[kBufSize]); |
| UniquePtr<uint8_t[]> write_buf(new uint8_t[kBufSize]); |
| if (read_buf.get() == NULL || write_buf.get() == NULL) { |
| LOG(WARNING) << "Zip: failed to allocate buffer to inflate"; |
| return false; |
| } |
| |
| UniquePtr<ZStream> zstream(new ZStream(write_buf.get(), kBufSize)); |
| |
| // Use the undocumented "negative window bits" feature to tell zlib |
| // that there's no zlib header waiting for it. |
| int zerr = inflateInit2(&zstream->Get(), -MAX_WBITS); |
| if (zerr != Z_OK) { |
| if (zerr == Z_VERSION_ERROR) { |
| LOG(ERROR) << "Installed zlib is not compatible with linked version (" << ZLIB_VERSION << ")"; |
| } else { |
| LOG(WARNING) << "Call to inflateInit2 failed (zerr=" << zerr << ")"; |
| } |
| return false; |
| } |
| |
| size_t remaining = compressed_length; |
| do { |
| // read as much as we can |
| if (zstream->Get().avail_in == 0) { |
| size_t bytes_to_read = (remaining > kBufSize) ? kBufSize : remaining; |
| |
| ssize_t actual = TEMP_FAILURE_RETRY(read(in, read_buf.get(), bytes_to_read)); |
| if (actual != static_cast<ssize_t>(bytes_to_read)) { |
| LOG(WARNING) << "Zip: inflate read failed (" << actual << " vs " << bytes_to_read << ")"; |
| return false; |
| } |
| remaining -= bytes_to_read; |
| zstream->Get().next_in = read_buf.get(); |
| zstream->Get().avail_in = bytes_to_read; |
| } |
| |
| // uncompress the data |
| zerr = inflate(&zstream->Get(), Z_NO_FLUSH); |
| if (zerr != Z_OK && zerr != Z_STREAM_END) { |
| LOG(WARNING) << "Zip: inflate zerr=" << zerr |
| << " (next_in=" << zstream->Get().next_in |
| << " avail_in=" << zstream->Get().avail_in |
| << " next_out=" << zstream->Get().next_out |
| << " avail_out=" << zstream->Get().avail_out |
| << ")"; |
| return false; |
| } |
| |
| // write when we're full or when we're done |
| if (zstream->Get().avail_out == 0 || |
| (zerr == Z_STREAM_END && zstream->Get().avail_out != kBufSize)) { |
| size_t bytes_to_write = zstream->Get().next_out - write_buf.get(); |
| memcpy(dst, write_buf.get(), bytes_to_write); |
| dst += bytes_to_write; |
| zstream->Get().next_out = write_buf.get(); |
| zstream->Get().avail_out = kBufSize; |
| } |
| } while (zerr == Z_OK); |
| |
| DCHECK_EQ(zerr, Z_STREAM_END); // other errors should've been caught |
| |
| // paranoia |
| if (zstream->Get().total_out != uncompressed_length) { |
| LOG(WARNING) << "Zip: size mismatch on inflated file (" |
| << zstream->Get().total_out << " vs " << uncompressed_length << ")"; |
| return false; |
| } |
| |
| DCHECK_EQ(dst, begin + size); |
| return true; |
| } |
| |
| bool ZipEntry::ExtractToFile(File& file) { |
| uint32_t length = GetUncompressedLength(); |
| int result = TEMP_FAILURE_RETRY(ftruncate(file.Fd(), length)); |
| if (result == -1) { |
| PLOG(WARNING) << "Zip: failed to ftruncate " << file.GetPath() << " to length " << length; |
| return false; |
| } |
| |
| UniquePtr<MemMap> map(MemMap::MapFile(length, PROT_READ | PROT_WRITE, MAP_SHARED, file.Fd(), 0)); |
| if (map.get() == NULL) { |
| LOG(WARNING) << "Zip: failed to mmap space for " << file.GetPath(); |
| return false; |
| } |
| |
| return ExtractToMemory(map->Begin(), map->Size()); |
| } |
| |
| bool ZipEntry::ExtractToMemory(uint8_t* begin, size_t size) { |
| off_t data_offset = GetDataOffset(); |
| if (data_offset == -1) { |
| LOG(WARNING) << "Zip: data_offset=" << data_offset; |
| return false; |
| } |
| if (lseek(zip_archive_->fd_, data_offset, SEEK_SET) != data_offset) { |
| PLOG(WARNING) << "Zip: lseek to data at " << data_offset << " failed"; |
| return false; |
| } |
| |
| // TODO: this doesn't verify the data's CRC, but probably should (especially |
| // for uncompressed data). |
| switch (GetCompressionMethod()) { |
| case kCompressStored: |
| return CopyFdToMemory(begin, size, zip_archive_->fd_, GetUncompressedLength()); |
| case kCompressDeflated: |
| return InflateToMemory(begin, size, zip_archive_->fd_, |
| GetUncompressedLength(), GetCompressedLength()); |
| default: |
| LOG(WARNING) << "Zip: unknown compression method " << std::hex << GetCompressionMethod(); |
| return false; |
| } |
| } |
| |
| MemMap* ZipEntry::ExtractToMemMap(const char* entry_filename) { |
| std::string name(entry_filename); |
| name += " extracted in memory from "; |
| name += entry_filename; |
| UniquePtr<MemMap> map(MemMap::MapAnonymous(name.c_str(), |
| NULL, |
| GetUncompressedLength(), |
| PROT_READ | PROT_WRITE)); |
| if (map.get() == NULL) { |
| LOG(ERROR) << "Zip: mmap for '" << entry_filename << "' failed"; |
| return NULL; |
| } |
| |
| bool success = ExtractToMemory(map->Begin(), map->Size()); |
| if (!success) { |
| LOG(ERROR) << "Zip: Failed to extract '" << entry_filename << "' to memory"; |
| return NULL; |
| } |
| |
| return map.release(); |
| } |
| |
| static void SetCloseOnExec(int fd) { |
| // This dance is more portable than Linux's O_CLOEXEC open(2) flag. |
| int flags = fcntl(fd, F_GETFD); |
| if (flags == -1) { |
| PLOG(WARNING) << "fcntl(" << fd << ", F_GETFD) failed"; |
| return; |
| } |
| int rc = fcntl(fd, F_SETFD, flags | FD_CLOEXEC); |
| if (rc == -1) { |
| PLOG(WARNING) << "fcntl(" << fd << ", F_SETFD, " << flags << ") failed"; |
| return; |
| } |
| } |
| |
| ZipArchive* ZipArchive::Open(const std::string& filename) { |
| DCHECK(!filename.empty()); |
| int fd = open(filename.c_str(), O_RDONLY, 0); |
| if (fd == -1) { |
| PLOG(WARNING) << "Unable to open '" << filename << "'"; |
| return NULL; |
| } |
| SetCloseOnExec(fd); |
| return OpenFromFd(fd); |
| } |
| |
| ZipArchive* ZipArchive::OpenFromFd(int fd) { |
| UniquePtr<ZipArchive> zip_archive(new ZipArchive(fd)); |
| if (zip_archive.get() == NULL) { |
| return NULL; |
| } |
| if (!zip_archive->MapCentralDirectory()) { |
| zip_archive->Close(); |
| return NULL; |
| } |
| if (!zip_archive->Parse()) { |
| zip_archive->Close(); |
| return NULL; |
| } |
| return zip_archive.release(); |
| } |
| |
| ZipEntry* ZipArchive::Find(const char* name) const { |
| DCHECK(name != NULL); |
| DirEntries::const_iterator it = dir_entries_.find(name); |
| if (it == dir_entries_.end()) { |
| return NULL; |
| } |
| return new ZipEntry(this, (*it).second); |
| } |
| |
| void ZipArchive::Close() { |
| if (fd_ != -1) { |
| close(fd_); |
| } |
| fd_ = -1; |
| num_entries_ = 0; |
| dir_offset_ = 0; |
| } |
| |
| // Find the zip Central Directory and memory-map it. |
| // |
| // On success, returns true after populating fields from the EOCD area: |
| // num_entries_ |
| // dir_offset_ |
| // dir_map_ |
| bool ZipArchive::MapCentralDirectory() { |
| /* |
| * Get and test file length. |
| */ |
| off_t file_length = lseek(fd_, 0, SEEK_END); |
| if (file_length < kEOCDLen) { |
| LOG(WARNING) << "Zip: length " << file_length << " is too small to be zip"; |
| return false; |
| } |
| |
| // Perform the traditional EOCD snipe hunt. |
| // |
| // We're searching for the End of Central Directory magic number, |
| // which appears at the start of the EOCD block. It's followed by |
| // 18 bytes of EOCD stuff and up to 64KB of archive comment. We |
| // need to read the last part of the file into a buffer, dig through |
| // it to find the magic number, parse some values out, and use those |
| // to determine the extent of the CD. |
| // |
| // We start by pulling in the last part of the file. |
| size_t read_amount = kMaxEOCDSearch; |
| if (file_length < off_t(read_amount)) { |
| read_amount = file_length; |
| } |
| |
| UniquePtr<uint8_t[]> scan_buf(new uint8_t[read_amount]); |
| if (scan_buf.get() == NULL) { |
| return false; |
| } |
| |
| off_t search_start = file_length - read_amount; |
| |
| if (lseek(fd_, search_start, SEEK_SET) != search_start) { |
| PLOG(WARNING) << "Zip: seek " << search_start << " failed"; |
| return false; |
| } |
| ssize_t actual = TEMP_FAILURE_RETRY(read(fd_, scan_buf.get(), read_amount)); |
| if (actual == -1) { |
| PLOG(WARNING) << "Zip: read " << read_amount << " failed"; |
| return false; |
| } |
| |
| |
| // Scan backward for the EOCD magic. In an archive without a trailing |
| // comment, we'll find it on the first try. (We may want to consider |
| // doing an initial minimal read; if we don't find it, retry with a |
| // second read as above.) |
| int i; |
| for (i = read_amount - kEOCDLen; i >= 0; i--) { |
| if (scan_buf.get()[i] == 0x50 && Le32ToHost(&(scan_buf.get())[i]) == kEOCDSignature) { |
| break; |
| } |
| } |
| if (i < 0) { |
| LOG(WARNING) << "Zip: EOCD not found, not a zip file"; |
| return false; |
| } |
| |
| off_t eocd_offset = search_start + i; |
| const byte* eocd_ptr = scan_buf.get() + i; |
| |
| DCHECK(eocd_offset < file_length); |
| |
| // Grab the CD offset and size, and the number of entries in the |
| // archive. Verify that they look reasonable. |
| uint16_t num_entries = Le16ToHost(eocd_ptr + kEOCDNumEntries); |
| uint32_t dir_size = Le32ToHost(eocd_ptr + kEOCDSize); |
| uint32_t dir_offset = Le32ToHost(eocd_ptr + kEOCDFileOffset); |
| |
| if ((uint64_t) dir_offset + (uint64_t) dir_size > (uint64_t) eocd_offset) { |
| LOG(WARNING) << "Zip: bad offsets (" |
| << "dir=" << dir_offset << ", " |
| << "size=" << dir_size << ", " |
| << "eocd=" << eocd_offset << ")"; |
| return false; |
| } |
| if (num_entries == 0) { |
| LOG(WARNING) << "Zip: empty archive?"; |
| return false; |
| } |
| |
| // It all looks good. Create a mapping for the CD. |
| dir_map_.reset(MemMap::MapFile(dir_size, PROT_READ, MAP_SHARED, fd_, dir_offset)); |
| if (dir_map_.get() == NULL) { |
| return false; |
| } |
| |
| num_entries_ = num_entries; |
| dir_offset_ = dir_offset; |
| return true; |
| } |
| |
| bool ZipArchive::Parse() { |
| const byte* cd_ptr = dir_map_->Begin(); |
| size_t cd_length = dir_map_->Size(); |
| |
| // Walk through the central directory, adding entries to the hash |
| // table and verifying values. |
| const byte* ptr = cd_ptr; |
| for (int i = 0; i < num_entries_; i++) { |
| if (Le32ToHost(ptr) != kCDESignature) { |
| LOG(WARNING) << "Zip: missed a central dir sig (at " << i << ")"; |
| return false; |
| } |
| if (ptr + kCDELen > cd_ptr + cd_length) { |
| LOG(WARNING) << "Zip: ran off the end (at " << i << ")"; |
| return false; |
| } |
| |
| int64_t local_hdr_offset = Le32ToHost(ptr + kCDELocalOffset); |
| if (local_hdr_offset >= dir_offset_) { |
| LOG(WARNING) << "Zip: bad LFH offset " << local_hdr_offset << " at entry " << i; |
| return false; |
| } |
| |
| uint16_t filename_len = Le16ToHost(ptr + kCDENameLen); |
| uint16_t extra_len = Le16ToHost(ptr + kCDEExtraLen); |
| uint16_t comment_len = Le16ToHost(ptr + kCDECommentLen); |
| |
| // add the CDE filename to the hash table |
| const char* name = reinterpret_cast<const char*>(ptr + kCDELen); |
| dir_entries_.Put(StringPiece(name, filename_len), ptr); |
| ptr += kCDELen + filename_len + extra_len + comment_len; |
| if (ptr > cd_ptr + cd_length) { |
| LOG(WARNING) << "Zip: bad CD advance " |
| << "(" << ptr << " vs " << (cd_ptr + cd_length) << ") " |
| << "at entry " << i; |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| } // namespace art |