| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "disassembler_arm.h" |
| |
| #include <iostream> |
| |
| #include "logging.h" |
| #include "stringprintf.h" |
| #include "thread.h" |
| |
| namespace art { |
| namespace arm { |
| |
| DisassemblerArm::DisassemblerArm() { |
| } |
| |
| void DisassemblerArm::Dump(std::ostream& os, const uint8_t* begin, const uint8_t* end) { |
| if ((reinterpret_cast<intptr_t>(begin) & 1) == 0) { |
| for (const uint8_t* cur = begin; cur < end; cur += 4) { |
| DumpArm(os, cur); |
| } |
| } else { |
| // remove thumb specifier bits |
| begin = reinterpret_cast<const uint8_t*>(reinterpret_cast<uintptr_t>(begin) & ~1); |
| end = reinterpret_cast<const uint8_t*>(reinterpret_cast<uintptr_t>(end) & ~1); |
| for (const uint8_t* cur = begin; cur < end;) { |
| cur += DumpThumb16(os, cur); |
| } |
| } |
| } |
| |
| static const char* kConditionCodeNames[] = { |
| "eq", // 0000 - equal |
| "ne", // 0001 - not-equal |
| "cs", // 0010 - carry-set, greater than, equal or unordered |
| "cc", // 0011 - carry-clear, less than |
| "mi", // 0100 - minus, negative |
| "pl", // 0101 - plus, positive or zero |
| "vs", // 0110 - overflow |
| "vc", // 0111 - no overflow |
| "hi", // 1000 - unsigned higher |
| "ls", // 1001 - unsigned lower or same |
| "ge", // 1010 - signed greater than or equal |
| "lt", // 1011 - signed less than |
| "gt", // 1100 - signed greater than |
| "le", // 1101 - signed less than or equal |
| "", // 1110 - always |
| "nv", // 1111 - never (mostly obsolete, but might be a clue that we're mistranslating) |
| }; |
| |
| void DisassemblerArm::DumpCond(std::ostream& os, uint32_t cond) { |
| if (cond < 15) { |
| os << kConditionCodeNames[cond]; |
| } else { |
| os << "Unexpected condition: " << cond; |
| } |
| } |
| |
| void DisassemblerArm::DumpBranchTarget(std::ostream& os, const uint8_t* instr_ptr, int32_t imm32) { |
| os << StringPrintf("%+d (%p)", imm32, instr_ptr + imm32); |
| } |
| |
| static uint32_t ReadU16(const uint8_t* ptr) { |
| return ptr[0] | (ptr[1] << 8); |
| } |
| |
| static uint32_t ReadU32(const uint8_t* ptr) { |
| return ptr[0] | (ptr[1] << 8) | (ptr[2] << 16) | (ptr[3] << 24); |
| } |
| |
| static const char* kDataProcessingOperations[] = { |
| "and", "eor", "sub", "rsb", "add", "adc", "sbc", "rsc", |
| "tst", "teq", "cmp", "cmn", "orr", "mov", "bic", "mvn", |
| }; |
| |
| static const char* kThumbDataProcessingOperations[] = { |
| "and", "eor", "lsl", "lsr", "asr", "adc", "sbc", "ror", |
| "tst", "rsb", "cmp", "cmn", "orr", "mul", "bic", "mvn", |
| }; |
| |
| struct ArmRegister { |
| explicit ArmRegister(uint32_t r) : r(r) { CHECK_LE(r, 15U); } |
| ArmRegister(uint32_t instruction, uint32_t at_bit) : r((instruction >> at_bit) & 0xf) { CHECK_LE(r, 15U); } |
| uint32_t r; |
| }; |
| std::ostream& operator<<(std::ostream& os, const ArmRegister& r) { |
| if (r.r == 13) { |
| os << "sp"; |
| } else if (r.r == 14) { |
| os << "lr"; |
| } else if (r.r == 15) { |
| os << "pc"; |
| } else { |
| os << "r" << r.r; |
| } |
| return os; |
| } |
| |
| struct ThumbRegister : ArmRegister { |
| ThumbRegister(uint16_t instruction, uint16_t at_bit) : ArmRegister((instruction >> at_bit) & 0x7) {} |
| }; |
| |
| struct Rm { |
| explicit Rm(uint32_t instruction) : shift((instruction >> 4) & 0xff), rm(instruction & 0xf) {} |
| uint32_t shift; |
| ArmRegister rm; |
| }; |
| std::ostream& operator<<(std::ostream& os, const Rm& r) { |
| os << r.rm; |
| if (r.shift != 0) { |
| os << "-shift-" << r.shift; // TODO |
| } |
| return os; |
| } |
| |
| struct ShiftedImmediate { |
| explicit ShiftedImmediate(uint32_t instruction) { |
| uint32_t rotate = ((instruction >> 8) & 0xf); |
| uint32_t imm = (instruction & 0xff); |
| value = (imm >> (2 * rotate)) | (imm << (32 - (2 * rotate))); |
| } |
| uint32_t value; |
| }; |
| std::ostream& operator<<(std::ostream& os, const ShiftedImmediate& rhs) { |
| os << "#" << rhs.value; |
| return os; |
| } |
| |
| struct RegisterList { |
| explicit RegisterList(uint32_t instruction) : register_list(instruction & 0xffff) {} |
| uint32_t register_list; |
| }; |
| std::ostream& operator<<(std::ostream& os, const RegisterList& rhs) { |
| if (rhs.register_list == 0) { |
| os << "<no register list?>"; |
| return os; |
| } |
| os << "{"; |
| bool first = true; |
| for (size_t i = 0; i < 16; i++) { |
| if ((rhs.register_list & (1 << i)) != 0) { |
| if (first) { |
| first = false; |
| } else { |
| os << ", "; |
| } |
| os << ArmRegister(i); |
| } |
| } |
| os << "}"; |
| return os; |
| } |
| |
| void DisassemblerArm::DumpArm(std::ostream& os, const uint8_t* instr_ptr) { |
| uint32_t instruction = ReadU32(instr_ptr); |
| uint32_t cond = (instruction >> 28) & 0xf; |
| uint32_t op1 = (instruction >> 25) & 0x7; |
| std::string opcode; |
| std::string suffixes; |
| std::ostringstream args; |
| switch (op1) { |
| case 0: |
| case 1: // Data processing instructions. |
| { |
| if ((instruction & 0x0ff000f0) == 0x01200070) { // BKPT |
| opcode = "bkpt"; |
| uint32_t imm12 = (instruction >> 8) & 0xfff; |
| uint32_t imm4 = (instruction & 0xf); |
| args << '#' << ((imm12 << 4) | imm4); |
| break; |
| } |
| if ((instruction & 0x0fffffd0) == 0x012fff10) { // BX and BLX (register) |
| opcode = (((instruction >> 5) & 1) ? "blx" : "bx"); |
| args << ArmRegister(instruction & 0xf); |
| break; |
| } |
| bool i = (instruction & (1 << 25)) != 0; |
| bool s = (instruction & (1 << 20)) != 0; |
| uint32_t op = (instruction >> 21) & 0xf; |
| opcode = kDataProcessingOperations[op]; |
| bool implicit_s = ((op & ~3) == 8); // TST, TEQ, CMP, and CMN. |
| if (implicit_s) { |
| // Rd is unused (and not shown), and we don't show the 's' suffix either. |
| } else { |
| if (s) { |
| suffixes += 's'; |
| } |
| args << ArmRegister(instruction, 12) << ", "; |
| } |
| if (i) { |
| args << ArmRegister(instruction, 16) << ", " << ShiftedImmediate(instruction); |
| } else { |
| args << Rm(instruction); |
| } |
| } |
| break; |
| case 2: // Load/store word and unsigned byte. |
| { |
| bool p = (instruction & (1 << 24)) != 0; |
| bool b = (instruction & (1 << 22)) != 0; |
| bool w = (instruction & (1 << 21)) != 0; |
| bool l = (instruction & (1 << 20)) != 0; |
| opcode = StringPrintf("%s%s", (l ? "ldr" : "str"), (b ? "b" : "")); |
| args << ArmRegister(instruction, 12) << ", "; |
| ArmRegister rn(instruction, 16); |
| if (rn.r == 0xf) { |
| UNIMPLEMENTED(FATAL) << "literals"; |
| } else { |
| bool wback = !p || w; |
| uint32_t offset = (instruction & 0xfff); |
| if (p && !wback) { |
| args << "[" << rn << ", #" << offset << "]"; |
| } else if (p && wback) { |
| args << "[" << rn << ", #" << offset << "]!"; |
| } else if (!p && wback) { |
| args << "[" << rn << "], #" << offset; |
| } else { |
| LOG(FATAL) << p << " " << w; |
| } |
| if (rn.r == 9) { |
| args << " ; "; |
| Thread::DumpThreadOffset(args, offset, 4); |
| } |
| } |
| } |
| break; |
| case 4: // Load/store multiple. |
| { |
| bool p = (instruction & (1 << 24)) != 0; |
| bool u = (instruction & (1 << 23)) != 0; |
| bool w = (instruction & (1 << 21)) != 0; |
| bool l = (instruction & (1 << 20)) != 0; |
| opcode = StringPrintf("%s%c%c", (l ? "ldm" : "stm"), (u ? 'i' : 'd'), (p ? 'b' : 'a')); |
| args << ArmRegister(instruction, 16) << (w ? "!" : "") << ", " << RegisterList(instruction); |
| } |
| break; |
| case 5: // Branch/branch with link. |
| { |
| bool bl = (instruction & (1 << 24)) != 0; |
| opcode = (bl ? "bl" : "b"); |
| int32_t imm26 = (instruction & 0xffffff) << 2; |
| int32_t imm32 = (imm26 << 6) >> 6; // Sign extend. |
| DumpBranchTarget(args, instr_ptr + 8, imm32); |
| } |
| break; |
| default: |
| opcode = "???"; |
| break; |
| } |
| opcode += kConditionCodeNames[cond]; |
| opcode += suffixes; |
| // TODO: a more complete ARM disassembler could generate wider opcodes. |
| os << StringPrintf("\t\t\t%p: %08x\t%-7s ", instr_ptr, instruction, opcode.c_str()) << args.str() << '\n'; |
| } |
| |
| size_t DisassemblerArm::DumpThumb32(std::ostream& os, const uint8_t* instr_ptr) { |
| uint32_t instr = (ReadU16(instr_ptr) << 16) | ReadU16(instr_ptr + 2); |
| // |111|1 1|1000000|0000|1111110000000000| |
| // |5 3|2 1|0987654|3 0|5 0 5 0| |
| // |---|---|-------|----|----------------| |
| // |332|2 2|2222222|1111|1111110000000000| |
| // |1 9|8 7|6543210|9 6|5 0 5 0| |
| // |---|---|-------|----|----------------| |
| // |111|op1| op2 | | | |
| uint32_t op1 = (instr >> 27) & 3; |
| if (op1 == 0) { |
| return DumpThumb16(os, instr_ptr); |
| } |
| |
| uint32_t op2 = (instr >> 20) & 0x7F; |
| std::ostringstream opcode; |
| std::ostringstream args; |
| switch (op1) { |
| case 0: |
| break; |
| case 1: |
| if ((op2 & 0x64) == 0) { // 00x x0xx |
| // |111|11|10|00|0|00|0000|1111110000000000| |
| // |5 3|21|09|87|6|54|3 0|5 0 5 0| |
| // |---|--|--|--|-|--|----|----------------| |
| // |332|22|22|22|2|22|1111|1111110000000000| |
| // |1 9|87|65|43|2|10|9 6|5 0 5 0| |
| // |---|--|--|--|-|--|----|----------------| |
| // |111|01|00|op|0|WL| Rn | | |
| // |111|01| op2 | | | |
| // STM - 111 01 00-01-0-W0 nnnn rrrrrrrrrrrrrrrr |
| // LDM - 111 01 00-01-0-W1 nnnn rrrrrrrrrrrrrrrr |
| // PUSH- 111 01 00-01-0-10 1101 0M0rrrrrrrrrrrrr |
| // POP - 111 01 00-01-0-11 1101 PM0rrrrrrrrrrrrr |
| uint32_t op = (instr >> 23) & 3; |
| uint32_t W = (instr >> 21) & 1; |
| uint32_t L = (instr >> 20) & 1; |
| ArmRegister Rn(instr, 16); |
| if (op == 1 || op == 2) { |
| if (op == 1) { |
| if (L == 0) { |
| opcode << "stm"; |
| args << Rn << (W == 0 ? "" : "!") << ", "; |
| } else { |
| if (Rn.r != 13) { |
| opcode << "ldm"; |
| args << Rn << (W == 0 ? "" : "!") << ", "; |
| } else { |
| opcode << "pop"; |
| } |
| } |
| } else { |
| if (L == 0) { |
| if (Rn.r != 13) { |
| opcode << "stmdb"; |
| args << Rn << (W == 0 ? "" : "!") << ", "; |
| } else { |
| opcode << "push"; |
| } |
| } else { |
| opcode << "ldmdb"; |
| args << Rn << (W == 0 ? "" : "!") << ", "; |
| } |
| } |
| args << RegisterList(instr); |
| } |
| } else if ((op2 & 0x64) == 4) { // 00x x1xx |
| uint32_t op3 = (instr >> 23) & 3; |
| uint32_t op4 = (instr >> 20) & 3; |
| //uint32_t op5 = (instr >> 4) & 0xF; |
| ArmRegister Rn(instr, 16); |
| ArmRegister Rt(instr, 12); |
| uint32_t imm8 = instr & 0xFF; |
| if (op3 == 0 && op4 == 0) { // STREX |
| ArmRegister Rd(instr, 8); |
| opcode << "strex"; |
| args << Rd << ", " << Rt << ", [" << Rn << ", #" << (imm8 << 2) << "]"; |
| } else if (op3 == 0 && op4 == 1) { // LDREX |
| opcode << "ldrex"; |
| args << Rt << ", [" << Rn << ", #" << (imm8 << 2) << "]"; |
| } |
| } else if ((op2 & 0x60) == 0x20) { // 01x xxxx |
| // Data-processing (shifted register) |
| // |111|1110|0000|0|0000|1111|1100|0000|0000| |
| // |5 3|2109|8765|4|3 0|5 |10 8|7 5 |3 0| |
| // |---|----|----|-|----|----|----|----|----| |
| // |332|2222|2222|2|1111|1111|1100|0000|0000| |
| // |1 9|8765|4321|0|9 6|5 |10 8|7 5 |3 0| |
| // |---|----|----|-|----|----|----|----|----| |
| // |111|0101| op3|S| Rn | | Rd | | Rm | |
| uint32_t op3 = (instr >> 21) & 0xF; |
| uint32_t S = (instr >> 20) & 1; |
| uint32_t Rn = (instr >> 16) & 0xF; |
| ArmRegister Rd(instr, 8); |
| ArmRegister Rm(instr, 0); |
| switch (op3) { |
| case 0x0: |
| if (Rn != 0xF) { |
| opcode << "and"; |
| } else { |
| opcode << "tst"; |
| S = 0; // don't print 's' |
| } |
| break; |
| case 0x1: opcode << "bic"; break; |
| case 0x2: |
| if (Rn != 0xF) { |
| opcode << "orr"; |
| } else { |
| opcode << "mov"; |
| } |
| break; |
| case 0x3: |
| if (Rn != 0xF) { |
| opcode << "orn"; |
| } else { |
| opcode << "mvn"; |
| } |
| break; |
| case 0x4: |
| if (Rn != 0xF) { |
| opcode << "eor"; |
| } else { |
| opcode << "teq"; |
| S = 0; // don't print 's' |
| } |
| break; |
| case 0x6: opcode << "pkh"; break; |
| case 0x8: |
| if (Rn != 0xF) { |
| opcode << "add"; |
| } else { |
| opcode << "cmn"; |
| S = 0; // don't print 's' |
| } |
| break; |
| case 0xA: opcode << "adc"; break; |
| case 0xB: opcode << "sbc"; break; |
| } |
| |
| if (S == 1) { |
| opcode << "s"; |
| } |
| opcode << ".w"; |
| args << Rd << ", " << Rm; |
| } else if ((op2 & 0x40) == 0x40) { // 1xx xxxx |
| // Co-processor instructions |
| // |111|1|11|000000|0000|1111|1100|000|0 |0000| |
| // |5 3|2|10|987654|3 0|54 2|10 8|7 5|4 | 0| |
| // |---|-|--|------|----|----|----|---|---|----| |
| // |332|2|22|222222|1111|1111|1100|000|0 |0000| |
| // |1 9|8|76|543210|9 6|54 2|10 8|7 5|4 | 0| |
| // |---|-|--|------|----|----|----|---|---|----| |
| // |111| |11| op3 | Rn | |copr| |op4| | |
| uint32_t op3 = (instr >> 20) & 0x3F; |
| uint32_t coproc = (instr >> 8) & 0xF; |
| uint32_t op4 = (instr >> 4) & 0x1; |
| if ((op3 == 2 || op3 == 2 || op3 == 6 || op3 == 7) || // 00x1x |
| (op3 >= 8 && op3 <= 15) || (op3 >= 16 && op3 <= 31)) { // 001xxx, 01xxxx |
| // Extension register load/store instructions |
| // |111|1|110|00000|0000|1111|110|000000000| |
| // |5 3|2|109|87654|3 0|54 2|10 |87 54 0| |
| // |---|-|---|-----|----|----|---|---------| |
| // |332|2|222|22222|1111|1111|110|000000000| |
| // |1 9|8|765|43210|9 6|54 2|10 |87 54 0| |
| // |---|-|---|-----|----|----|---|---------| |
| // |111|T|110| op3 | Rn | |101| | |
| // 111 0 110 01001 0011 0000 101 000000011 - ec930a03 |
| if (op3 == 9 || op3 == 0xD) { // VLDM |
| // 1110 110 PUDW1 nnnn dddd 101S iiii iiii |
| uint32_t P = (instr >> 24) & 1; |
| uint32_t U = (instr >> 23) & 1; |
| uint32_t D = (instr >> 22) & 1; |
| uint32_t W = (instr >> 21) & 1; |
| uint32_t S = (instr >> 8) & 1; |
| ArmRegister Rn(instr, 16); |
| uint32_t Vd = (instr >> 12) & 0xF; |
| uint32_t imm8 = instr & 0xFF; |
| uint32_t d = (S == 0 ? ((Vd << 1) | D) : (Vd | (D << 4))); |
| if (P == 0 && U == 0 && W == 0) { |
| // TODO: 64bit transfers between ARM core and extension registers. |
| } else if (P == 0 && U == 1 && Rn.r == 13) { // VPOP |
| opcode << "vpop" << (S == 0 ? ".f64" : ".f32"); |
| args << d << " .. " << (d + imm8); |
| } else if (P == 1 && W == 0) { // VLDR |
| opcode << "vldr" << (S == 0 ? ".f64" : ".f32"); |
| args << d << ", [" << Rn << ", #" << imm8 << "]"; |
| } else { // VLDM |
| opcode << "vldm" << (S == 0 ? ".f64" : ".f32"); |
| args << Rn << ", " << d << " .. " << (d + imm8); |
| } |
| } |
| } else if ((op3 & 0x30) == 0x20 && op4 == 0) { // 10 xxxx ... 0 |
| if ((coproc & 0xE) == 0xA) { |
| // VFP data-processing instructions |
| // |111|1|1100|0000|0000|1111|110|0|00 |0|0|0000| |
| // |5 3|2|1098|7654|3 0|54 2|10 |8|76 |5|4|3 0| |
| // |---|-|----|----|----|----|---|-|----|-|-|----| |
| // |332|2|2222|2222|1111|1111|110|0|00 |0|0|0000| |
| // |1 9|8|7654|3210|9 6|54 2|109|8|76 |5|4|3 0| |
| // |---|-|----|----|----|----|---|-|----|-|-|----| |
| // |111|T|1110|opc1|opc2| |101| |opc3| | | | |
| // 111 0 1110|1111 0100 1110 101 0 01 1 0 1001 - eef4ea69 |
| uint32_t opc1 = (instr >> 20) & 0xF; |
| uint32_t opc2 = (instr >> 16) & 0xF; |
| uint32_t opc3 = (instr >> 6) & 0x3; |
| if ((opc1 & 0xB) == 0xB) { // 1x11 |
| // Other VFP data-processing instructions. |
| uint32_t D = (instr >> 22) & 0x1; |
| uint32_t Vd = (instr >> 12) & 0xF; |
| uint32_t sz = (instr >> 8) & 1; |
| uint32_t M = (instr >> 5) & 1; |
| uint32_t Vm = instr & 0xF; |
| bool dp_operation = sz == 1; |
| switch (opc2) { |
| case 0x1: // Vneg/Vsqrt |
| // 1110 11101 D 11 0001 dddd 101s o1M0 mmmm |
| opcode << (opc3 == 1 ? "vneg" : "vsqrt") << (dp_operation ? ".f64" : ".f32"); |
| if (dp_operation) { |
| args << "f" << ((D << 4) | Vd) << ", " << "f" << ((M << 4) | Vm); |
| } else { |
| args << "f" << ((Vd << 1) | D) << ", " << "f" << ((Vm << 1) | M); |
| } |
| break; |
| case 0x4: case 0x5: { // Vector compare |
| // 1110 11101 D 11 0100 dddd 101 sE1M0 mmmm |
| opcode << (opc3 == 1 ? "vcmp" : "vcmpe") << (dp_operation ? ".f64" : ".f32"); |
| if (dp_operation) { |
| args << "f" << ((D << 4) | Vd) << ", " << "f" << ((M << 4) | Vm); |
| } else { |
| args << "f" << ((Vd << 1) | D) << ", " << "f" << ((Vm << 1) | M); |
| } |
| break; |
| } |
| } |
| } |
| } |
| } else if ((op3 & 0x30) == 0x30) { // 11 xxxx |
| // Advanced SIMD |
| if ((instr & 0xFFBF0ED0) == 0xeeb10ac0) { // Vsqrt |
| // 1110 11101 D 11 0001 dddd 101S 11M0 mmmm |
| // 1110 11101 0 11 0001 1101 1011 1100 1000 - eeb1dbc8 |
| uint32_t D = (instr >> 22) & 1; |
| uint32_t Vd = (instr >> 12) & 0xF; |
| uint32_t sz = (instr >> 8) & 1; |
| uint32_t M = (instr >> 5) & 1; |
| uint32_t Vm = instr & 0xF; |
| bool dp_operation = sz == 1; |
| opcode << "vsqrt" << (dp_operation ? ".f64" : ".f32"); |
| if (dp_operation) { |
| args << "f" << ((D << 4) | Vd) << ", " << "f" << ((M << 4) | Vm); |
| } else { |
| args << "f" << ((Vd << 1) | D) << ", " << "f" << ((Vm << 1) | M); |
| } |
| } |
| } |
| } |
| break; |
| case 2: |
| if ((instr & 0x8000) == 0 && (op2 & 0x20) == 0) { |
| // Data-processing (modified immediate) |
| // |111|11|10|0000|0|0000|1|111|1100|00000000| |
| // |5 3|21|09|8765|4|3 0|5|4 2|10 8|7 5 0| |
| // |---|--|--|----|-|----|-|---|----|--------| |
| // |332|22|22|2222|2|1111|1|111|1100|00000000| |
| // |1 9|87|65|4321|0|9 6|5|4 2|10 8|7 5 0| |
| // |---|--|--|----|-|----|-|---|----|--------| |
| // |111|10|i0| op3|S| Rn |0|iii| Rd |iiiiiiii| |
| // 111 10 x0 xxxx x xxxx opxxx xxxx xxxxxxxx |
| uint32_t i = (instr >> 26) & 1; |
| uint32_t op3 = (instr >> 21) & 0xF; |
| uint32_t S = (instr >> 20) & 1; |
| ArmRegister Rn(instr, 16); |
| uint32_t imm3 = (instr >> 12) & 7; |
| ArmRegister Rd(instr, 8); |
| uint32_t imm8 = instr & 0xFF; |
| int32_t imm32 = (i << 12) | (imm3 << 8) | imm8; |
| switch (op3) { |
| case 0x0: opcode << "and"; break; |
| case 0x1: opcode << "bic"; break; |
| case 0x2: opcode << "orr"; break; |
| case 0x3: opcode << "orn"; break; |
| case 0x4: opcode << "eor"; break; |
| case 0x8: opcode << "add"; break; |
| case 0xA: opcode << "adc"; break; |
| case 0xB: opcode << "sbc"; break; |
| case 0xD: opcode << "sub"; break; |
| case 0xE: opcode << "rsb"; break; |
| default: opcode << "UNKNOWN DPMI-" << op3; break; |
| } |
| if (S == 1) { |
| opcode << "s"; |
| } |
| args << Rd << ", " << Rn << ", ThumbExpand(" << imm32 << ")"; |
| } else if ((instr & 0x8000) == 0 && (op2 & 0x20) != 0) { |
| // Data-processing (plain binary immediate) |
| // |111|11|10|00000|0000|1|111110000000000| |
| // |5 3|21|09|87654|3 0|5|4 0 5 0| |
| // |---|--|--|-----|----|-|---------------| |
| // |332|22|22|22222|1111|1|111110000000000| |
| // |1 9|87|65|43210|9 6|5|4 0 5 0| |
| // |---|--|--|-----|----|-|---------------| |
| // |111|10|x1| op3 | Rn |0|xxxxxxxxxxxxxxx| |
| uint32_t op3 = (instr >> 20) & 0x1F; |
| switch (op3) { |
| case 0x00: { |
| ArmRegister Rd(instr, 8); |
| ArmRegister Rn(instr, 16); |
| uint32_t i = (instr >> 26) & 1; |
| uint32_t imm3 = (instr >> 12) & 0x7; |
| uint32_t imm8 = instr & 0xFF; |
| uint32_t imm12 = (i << 11) | (imm3 << 8) | imm8; |
| if (Rn.r != 0xF) { |
| opcode << "addw"; |
| args << Rd << ", " << Rn << ", #" << imm12; |
| } else { |
| opcode << "adr"; |
| args << Rd << ", "; |
| DumpBranchTarget(args, instr_ptr + 4, imm12); |
| } |
| break; |
| } |
| case 0x04: { |
| // MOVW Rd, #imm16 - 111 10 i0 0010 0 iiii 0 iii dddd iiiiiiii |
| ArmRegister Rd(instr, 8); |
| uint32_t i = (instr >> 26) & 1; |
| uint32_t imm3 = (instr >> 12) & 0x7; |
| uint32_t imm8 = instr & 0xFF; |
| uint32_t Rn = (instr >> 16) & 0xF; |
| uint32_t imm16 = (Rn << 12) | (i << 11) | (imm3 << 8) | imm8; |
| opcode << "movw"; |
| args << Rd << ", #" << imm16; |
| break; |
| } |
| case 0x0A: { |
| // SUB.W Rd, Rn #imm12 - 111 10 i1 0101 0 nnnn 0 iii dddd iiiiiiii |
| ArmRegister Rd(instr, 8); |
| ArmRegister Rn(instr, 16); |
| uint32_t i = (instr >> 26) & 1; |
| uint32_t imm3 = (instr >> 12) & 0x7; |
| uint32_t imm8 = instr & 0xFF; |
| uint32_t imm12 = (i << 11) | (imm3 << 8) | imm8; |
| opcode << "sub.w"; |
| args << Rd << ", " << Rn << ", #" << imm12; |
| break; |
| } |
| default: |
| break; |
| } |
| } else { |
| // Branches and miscellaneous control |
| // |111|11|1000000|0000|1|111|1100|00000000| |
| // |5 3|21|0987654|3 0|5|4 2|10 8|7 5 0| |
| // |---|--|-------|----|-|---|----|--------| |
| // |332|22|2222222|1111|1|111|1100|00000000| |
| // |1 9|87|6543210|9 6|5|4 2|10 8|7 5 0| |
| // |---|--|-------|----|-|---|----|--------| |
| // |111|10| op2 | |1|op3|op4 | | |
| |
| uint32_t op3 = (instr >> 12) & 7; |
| //uint32_t op4 = (instr >> 8) & 0xF; |
| switch (op3) { |
| case 0: |
| if ((op2 & 0x38) != 0x38) { |
| // Conditional branch |
| // |111|11|1|0000|000000|1|1|1 |1|1 |10000000000| |
| // |5 3|21|0|9876|543 0|5|4|3 |2|1 |0 5 0| |
| // |---|--|-|----|------|-|-|--|-|--|-----------| |
| // |332|22|2|2222|221111|1|1|1 |1|1 |10000000000| |
| // |1 9|87|6|5432|109 6|5|4|3 |2|1 |0 5 0| |
| // |---|--|-|----|------|-|-|--|-|--|-----------| |
| // |111|10|S|cond| imm6 |1|0|J1|0|J2| imm11 | |
| uint32_t S = (instr >> 26) & 1; |
| uint32_t J2 = (instr >> 11) & 1; |
| uint32_t J1 = (instr >> 13) & 1; |
| uint32_t imm6 = (instr >> 16) & 0x3F; |
| uint32_t imm11 = instr & 0x7FF; |
| uint32_t cond = (instr >> 22) & 0xF; |
| int32_t imm32 = (S << 20) | (J2 << 19) | (J1 << 18) | (imm6 << 12) | (imm11 << 1); |
| imm32 = (imm32 << 11) >> 11; // sign extend 21bit immediate |
| opcode << "b"; |
| DumpCond(opcode, cond); |
| opcode << ".w"; |
| DumpBranchTarget(args, instr_ptr + 4, imm32); |
| } else if (op2 == 0x3B) { |
| // Miscellaneous control instructions |
| uint32_t op5 = (instr >> 4) & 0xF; |
| switch (op5) { |
| case 4: opcode << "dsb"; break; |
| case 5: opcode << "dmb"; break; |
| case 6: opcode << "isb"; break; |
| } |
| } |
| break; |
| case 2: |
| case 1: case 3: |
| break; |
| case 4: case 6: case 5: case 7: { |
| // BL, BLX (immediate) |
| // |111|11|1|0000000000|11|1 |1|1 |10000000000| |
| // |5 3|21|0|9876543 0|54|3 |2|1 |0 5 0| |
| // |---|--|-|----------|--|--|-|--|-----------| |
| // |332|22|2|2222221111|11|1 |1|1 |10000000000| |
| // |1 9|87|6|5 0 6|54|3 |2|1 |0 5 0| |
| // |---|--|-|----------|--|--|-|--|-----------| |
| // |111|10|S| imm10 |11|J1|L|J2| imm11 | |
| uint32_t S = (instr >> 26) & 1; |
| uint32_t J2 = (instr >> 11) & 1; |
| uint32_t L = (instr >> 12) & 1; |
| uint32_t J1 = (instr >> 13) & 1; |
| uint32_t imm10 = (instr >> 16) & 0x3FF; |
| uint32_t imm11 = instr & 0x7FF; |
| if (L == 0) { |
| opcode << "bx"; |
| } else { |
| opcode << "blx"; |
| } |
| uint32_t I1 = ~(J1 ^ S); |
| uint32_t I2 = ~(J2 ^ S); |
| int32_t imm32 = (S << 24) | (I1 << 23) | (I2 << 22) | (imm10 << 12) | (imm11 << 1); |
| imm32 = (imm32 << 8) >> 8; // sign extend 24 bit immediate. |
| DumpBranchTarget(args, instr_ptr + 4, imm32); |
| break; |
| } |
| } |
| } |
| break; |
| case 3: |
| switch (op2) { |
| case 0x00: case 0x02: case 0x04: case 0x06: // 000xxx0 |
| case 0x08: case 0x0A: case 0x0C: case 0x0E: { |
| // Store single data item |
| // |111|11|100|000|0|0000|1111|110000|000000| |
| // |5 3|21|098|765|4|3 0|5 2|10 6|5 0| |
| // |---|--|---|---|-|----|----|------|------| |
| // |332|22|222|222|2|1111|1111|110000|000000| |
| // |1 9|87|654|321|0|9 6|5 2|10 6|5 0| |
| // |---|--|---|---|-|----|----|------|------| |
| // |111|11|000|op3|0| | | op4 | | |
| uint32_t op3 = (instr >> 21) & 7; |
| //uint32_t op4 = (instr >> 6) & 0x3F; |
| switch (op3) { |
| case 0x0: case 0x4: { |
| // STRB Rt,[Rn,#+/-imm8] - 111 11 00 0 0 00 0 nnnn tttt 1 PUWii ii iiii |
| // STRB Rt,[Rn,Rm,lsl #imm2] - 111 11 00 0 0 00 0 nnnn tttt 0 00000 ii mmmm |
| ArmRegister Rn(instr, 16); |
| ArmRegister Rt(instr, 12); |
| opcode << "strb"; |
| if ((instr & 0x800) != 0) { |
| uint32_t imm8 = instr & 0xFF; |
| args << Rt << ", [" << Rn << ",#" << imm8 << "]"; |
| } else { |
| uint32_t imm2 = (instr >> 4) & 3; |
| ArmRegister Rm(instr, 0); |
| args << Rt << ", [" << Rn << ", " << Rm; |
| if (imm2 != 0) { |
| args << ", " << "lsl #" << imm2; |
| } |
| args << "]"; |
| } |
| break; |
| } |
| case 0x2: case 0x6: { |
| ArmRegister Rn(instr, 16); |
| ArmRegister Rt(instr, 12); |
| if (op3 == 2) { |
| if ((instr & 0x800) != 0) { |
| // STR Rt, [Rn, #imm8] - 111 11 000 010 0 nnnn tttt 1PUWiiiiiiii |
| uint32_t P = (instr >> 10) & 1; |
| uint32_t U = (instr >> 9) & 1; |
| uint32_t W = (instr >> 8) & 1; |
| uint32_t imm8 = instr & 0xFF; |
| int32_t imm32 = (imm8 << 24) >> 24; // sign-extend imm8 |
| if (Rn.r == 13 && P == 1 && U == 0 && W == 1 && imm32 == 4) { |
| opcode << "push"; |
| args << Rt; |
| } else if (Rn.r == 15 || (P == 0 && W == 0)) { |
| opcode << "UNDEFINED"; |
| } else { |
| if (P == 1 && U == 1 && W == 0) { |
| opcode << "strt"; |
| } else { |
| opcode << "str"; |
| } |
| args << Rt << ", [" << Rn; |
| if (P == 0 && W == 1) { |
| args << "], #" << imm32; |
| } else { |
| args << ", #" << imm32 << "]"; |
| if (W == 1) { |
| args << "!"; |
| } |
| } |
| } |
| } else { |
| // STR Rt, [Rn, Rm, LSL #imm2] - 111 11 000 010 0 nnnn tttt 000000iimmmm |
| ArmRegister Rn(instr, 16); |
| ArmRegister Rt(instr, 12); |
| ArmRegister Rm(instr, 0); |
| uint32_t imm2 = (instr >> 4) & 3; |
| opcode << "str.w"; |
| args << Rt << ", [" << Rn << ", " << Rm; |
| if (imm2 != 0) { |
| args << ", lsl #" << imm2; |
| } |
| args << "]"; |
| } |
| } else if (op3 == 6) { |
| // STR.W Rt, [Rn, #imm12] - 111 11 000 110 0 nnnn tttt iiiiiiiiiiii |
| uint32_t imm12 = instr & 0xFFF; |
| opcode << "str.w"; |
| args << Rt << ", [" << Rn << ", #" << imm12 << "]"; |
| } |
| break; |
| } |
| } |
| |
| break; |
| } |
| case 0x05: case 0x0D: case 0x15: case 0x1D: { // 00xx101 |
| // Load word |
| // |111|11|10|0 0|00|0|0000|1111|110000|000000| |
| // |5 3|21|09|8 7|65|4|3 0|5 2|10 6|5 0| |
| // |---|--|--|---|--|-|----|----|------|------| |
| // |332|22|22|2 2|22|2|1111|1111|110000|000000| |
| // |1 9|87|65|4 3|21|0|9 6|5 2|10 6|5 0| |
| // |---|--|--|---|--|-|----|----|------|------| |
| // |111|11|00|op3|10|1| Rn | Rt | op4 | | |
| // |111|11| op2 | | | imm12 | |
| uint32_t op3 = (instr >> 23) & 3; |
| uint32_t op4 = (instr >> 6) & 0x3F; |
| ArmRegister Rn(instr, 16); |
| ArmRegister Rt(instr, 12); |
| if (op3 == 1 || Rn.r == 15) { |
| // LDR.W Rt, [Rn, #imm12] - 111 11 00 00 101 nnnn tttt iiiiiiiiiiii |
| // LDR.W Rt, [PC, #imm12] - 111 11 00 0x 101 1111 tttt iiiiiiiiiiii |
| uint32_t imm12 = instr & 0xFFF; |
| opcode << "ldr.w"; |
| args << Rt << ", [" << Rn << ", #" << imm12 << "]"; |
| if (Rn.r == 9) { |
| args << " ; "; |
| Thread::DumpThreadOffset(args, imm12, 4); |
| } else if (Rn.r == 15) { |
| intptr_t lit_adr = reinterpret_cast<intptr_t>(instr_ptr); |
| lit_adr = RoundDown(lit_adr, 4) + 4 + imm12; |
| args << " ; " << reinterpret_cast<void*>(*reinterpret_cast<int32_t*>(lit_adr)); |
| } |
| } else if (op4 == 0) { |
| // LDR.W Rt, [Rn, Rm{, LSL #imm2}] - 111 11 00 00 101 nnnn tttt 000000iimmmm |
| uint32_t imm2 = (instr >> 4) & 0xF; |
| ArmRegister rm(instr, 0); |
| opcode << "ldr.w"; |
| args << Rt << ", [" << Rn << ", " << rm; |
| if (imm2 != 0) { |
| args << ", lsl #" << imm2; |
| } |
| args << "]"; |
| } else { |
| // LDRT Rt, [Rn, #imm8] - 111 11 00 00 101 nnnn tttt 1110iiiiiiii |
| uint32_t imm8 = instr & 0xFF; |
| opcode << "ldrt"; |
| args << Rt << ", [" << Rn << ", #" << imm8 << "]"; |
| } |
| break; |
| } |
| } |
| default: |
| break; |
| } |
| |
| // Apply any IT-block conditions to the opcode if necessary. |
| if (!it_conditions_.empty()) { |
| opcode << it_conditions_.back(); |
| it_conditions_.pop_back(); |
| } |
| |
| os << StringPrintf("\t\t\t%p: %08x\t%-7s ", instr_ptr, instr, opcode.str().c_str()) << args.str() << '\n'; |
| return 4; |
| } |
| |
| size_t DisassemblerArm::DumpThumb16(std::ostream& os, const uint8_t* instr_ptr) { |
| uint16_t instr = ReadU16(instr_ptr); |
| bool is_32bit = ((instr & 0xF000) == 0xF000) || ((instr & 0xF800) == 0xE800); |
| if (is_32bit) { |
| return DumpThumb32(os, instr_ptr); |
| } else { |
| std::ostringstream opcode; |
| std::ostringstream args; |
| uint16_t opcode1 = instr >> 10; |
| if (opcode1 < 0x10) { |
| // shift (immediate), add, subtract, move, and compare |
| uint16_t opcode2 = instr >> 9; |
| switch (opcode2) { |
| case 0x0: case 0x1: case 0x2: case 0x3: case 0x4: case 0x5: case 0x6: case 0x7: |
| case 0x8: case 0x9: case 0xA: case 0xB: { |
| // Logical shift left - 00 000xx xxxxxxxxx |
| // Logical shift right - 00 001xx xxxxxxxxx |
| // Arithmetic shift right - 00 010xx xxxxxxxxx |
| uint16_t imm5 = (instr >> 6) & 0x1F; |
| ThumbRegister rm(instr, 3); |
| ThumbRegister Rd(instr, 7); |
| if (opcode2 <= 3) { |
| opcode << "lsls"; |
| } else if (opcode2 <= 7) { |
| opcode << "lsrs"; |
| } else { |
| opcode << "asrs"; |
| } |
| args << Rd << ", " << rm << ", #" << imm5; |
| break; |
| } |
| case 0xC: case 0xD: case 0xE: case 0xF: { |
| // Add register - 00 01100 mmm nnn ddd |
| // Sub register - 00 01101 mmm nnn ddd |
| // Add 3-bit immediate - 00 01110 iii nnn ddd |
| // Sub 3-bit immediate - 00 01111 iii nnn ddd |
| uint16_t imm3_or_Rm = (instr >> 6) & 7; |
| ThumbRegister Rn(instr, 3); |
| ThumbRegister Rd(instr, 0); |
| if ((opcode2 & 2) != 0 && imm3_or_Rm == 0) { |
| opcode << "mov"; |
| } else { |
| if ((opcode2 & 1) == 0) { |
| opcode << "adds"; |
| } else { |
| opcode << "subs"; |
| } |
| } |
| args << Rd << ", " << Rn; |
| if ((opcode2 & 2) == 0) { |
| ArmRegister Rm(imm3_or_Rm); |
| args << ", " << Rm; |
| } else if (imm3_or_Rm != 0) { |
| args << ", #" << imm3_or_Rm; |
| } |
| break; |
| } |
| case 0x10: case 0x11: case 0x12: case 0x13: |
| case 0x14: case 0x15: case 0x16: case 0x17: |
| case 0x18: case 0x19: case 0x1A: case 0x1B: |
| case 0x1C: case 0x1D: case 0x1E: case 0x1F: { |
| // MOVS Rd, #imm8 - 00100 ddd iiiiiiii |
| // CMP Rn, #imm8 - 00101 nnn iiiiiiii |
| // ADDS Rn, #imm8 - 00110 nnn iiiiiiii |
| // SUBS Rn, #imm8 - 00111 nnn iiiiiiii |
| ThumbRegister Rn(instr, 8); |
| uint16_t imm8 = instr & 0xFF; |
| switch (opcode2 >> 2) { |
| case 4: opcode << "movs"; break; |
| case 5: opcode << "cmp"; break; |
| case 6: opcode << "adds"; break; |
| case 7: opcode << "subs"; break; |
| } |
| args << Rn << ", #" << imm8; |
| break; |
| } |
| default: |
| break; |
| } |
| } else if (opcode1 == 0x10) { |
| // Data-processing |
| uint16_t opcode2 = (instr >> 6) & 0xF; |
| ThumbRegister rm(instr, 3); |
| ThumbRegister rdn(instr, 0); |
| opcode << kThumbDataProcessingOperations[opcode2]; |
| args << rdn << ", " << rm; |
| } else if (opcode1 == 0x11) { |
| // Special data instructions and branch and exchange |
| uint16_t opcode2 = (instr >> 6) & 0x0F; |
| switch (opcode2) { |
| case 0x0: case 0x1: case 0x2: case 0x3: { |
| // Add low registers - 010001 0000 xxxxxx |
| // Add high registers - 010001 0001/001x xxxxxx |
| uint16_t DN = (instr >> 7) & 1; |
| ArmRegister rm(instr, 3); |
| uint16_t Rdn = instr & 7; |
| ArmRegister DN_Rdn((DN << 3) | Rdn); |
| opcode << "add"; |
| args << DN_Rdn << ", " << rm; |
| break; |
| } |
| case 0x8: case 0x9: case 0xA: case 0xB: { |
| // Move low registers - 010001 1000 xxxxxx |
| // Move high registers - 010001 1001/101x xxxxxx |
| uint16_t DN = (instr >> 7) & 1; |
| ArmRegister rm(instr, 3); |
| uint16_t Rdn = instr & 7; |
| ArmRegister DN_Rdn((DN << 3) | Rdn); |
| opcode << "mov"; |
| args << DN_Rdn << ", " << rm; |
| break; |
| } |
| case 0x5: case 0x6: case 0x7: { |
| // Compare high registers - 010001 0101/011x xxxxxx |
| uint16_t N = (instr >> 7) & 1; |
| ArmRegister rm(instr, 3); |
| uint16_t Rn = instr & 7; |
| ArmRegister N_Rn((N << 3) | Rn); |
| opcode << "cmp"; |
| args << N_Rn << ", " << rm; |
| break; |
| } |
| case 0xC: case 0xD: case 0xE: case 0xF: { |
| // Branch and exchange - 010001 110x xxxxxx |
| // Branch with link and exchange - 010001 111x xxxxxx |
| ArmRegister rm(instr, 3); |
| opcode << ((opcode2 & 0x2) == 0 ? "bx" : "blx"); |
| args << rm; |
| break; |
| } |
| default: |
| break; |
| } |
| } else if ((opcode1 >= 0x14 && opcode1 <= 0x17) || // 0101xx |
| (opcode1 >= 0x18 && opcode1 <= 0x1f) || // 011xxx |
| (opcode1 >= 0x20 && opcode1 <= 0x27)) { // 100xxx |
| // Load/store single data item |
| uint16_t opA = (instr >> 12) & 0xF; |
| if (opA == 0x5) { |
| uint16_t opB = (instr >> 9) & 0x7; |
| ThumbRegister Rm(instr, 6); |
| ThumbRegister Rn(instr, 3); |
| ThumbRegister Rt(instr, 0); |
| switch(opB) { |
| case 0: opcode << "str"; break; |
| case 1: opcode << "strh"; break; |
| case 2: opcode << "strb"; break; |
| case 3: opcode << "ldrsb"; break; |
| case 4: opcode << "ldr"; break; |
| case 5: opcode << "ldrh"; break; |
| case 6: opcode << "ldrb"; break; |
| case 7: opcode << "ldrsh"; break; |
| } |
| args << Rt << ", [" << Rn << ", " << Rm << "]"; |
| } else if (opA == 9) { |
| uint16_t opB = (instr >> 11) & 1; |
| ThumbRegister Rt(instr, 8); |
| uint16_t imm8 = instr & 0xFF; |
| opcode << (opB == 0 ? "str" : "ldr"); |
| args << Rt << ", [ sp, #" << (imm8 << 2) << "]"; |
| } else { |
| uint16_t imm5 = (instr >> 6) & 0x1F; |
| uint16_t opB = (instr >> 11) & 1; |
| ThumbRegister Rn(instr, 3); |
| ThumbRegister Rt(instr, 0); |
| switch(opA) { |
| case 6: |
| imm5 <<= 2; |
| opcode << (opB == 0 ? "str" : "ldr"); |
| break; |
| case 7: |
| imm5 <<= 0; |
| opcode << (opB == 0 ? "strb" : "ldrb"); |
| break; |
| case 8: |
| imm5 <<= 1; |
| opcode << (opB == 0 ? "strh" : "ldrh"); |
| break; |
| } |
| args << Rt << ", [" << Rn << ", #" << imm5 << "]"; |
| } |
| } else if ((instr & 0xF800) == 0xA800) { |
| // Generate SP-relative address |
| ThumbRegister rd(instr, 8); |
| int imm8 = instr & 0xFF; |
| opcode << "add"; |
| args << rd << ", sp, #" << (imm8 << 2); |
| } else if ((instr & 0xF000) == 0xB000) { |
| // Miscellaneous 16-bit instructions |
| uint16_t opcode2 = (instr >> 5) & 0x7F; |
| switch (opcode2) { |
| case 0x00: case 0x01: case 0x02: case 0x03: case 0x04: case 0x05: case 0x06: case 0x07: { |
| // Add immediate to SP - 1011 00000 ii iiiii |
| // Subtract immediate from SP - 1011 00001 ii iiiii |
| int imm7 = instr & 0x7F; |
| opcode << ((opcode2 & 4) == 0 ? "add" : "sub"); |
| args << "sp, sp, #" << (imm7 << 2); |
| break; |
| } |
| case 0x08: case 0x09: case 0x0A: case 0x0B: // 0001xxx |
| case 0x0C: case 0x0D: case 0x0E: case 0x0F: |
| case 0x48: case 0x49: case 0x4A: case 0x4B: // 1001xxx |
| case 0x4C: case 0x4D: case 0x4E: case 0x4F: { |
| // CBNZ, CBZ |
| uint16_t op = (instr >> 11) & 1; |
| uint16_t i = (instr >> 9) & 1; |
| uint16_t imm5 = (instr >> 3) & 0x1F; |
| ThumbRegister Rn(instr, 0); |
| opcode << (op != 0 ? "cbnz" : "cbz"); |
| uint32_t imm32 = (i << 7) | (imm5 << 1); |
| args << Rn << ", "; |
| DumpBranchTarget(args, instr_ptr + 4, imm32); |
| break; |
| } |
| case 0x78: case 0x79: case 0x7A: case 0x7B: // 1111xxx |
| case 0x7C: case 0x7D: case 0x7E: case 0x7F: { |
| // If-Then, and hints |
| uint16_t opA = (instr >> 4) & 0xF; |
| uint16_t opB = instr & 0xF; |
| if (opB == 0) { |
| switch (opA) { |
| case 0: opcode << "nop"; break; |
| case 1: opcode << "yield"; break; |
| case 2: opcode << "wfe"; break; |
| case 3: opcode << "sev"; break; |
| default: break; |
| } |
| } else { |
| uint32_t first_cond = opA; |
| uint32_t mask = opB; |
| opcode << "it"; |
| |
| // Flesh out the base "it" opcode with the specific collection of 't's and 'e's, |
| // and store up the actual condition codes we'll want to add to the next few opcodes. |
| size_t count = 3 - CTZ(mask); |
| it_conditions_.resize(count + 2); // Plus the implicit 't', plus the "" for the IT itself. |
| for (size_t i = 0; i < count; ++i) { |
| bool positive_cond = ((first_cond & 1) != 0); |
| bool positive_mask = ((mask & (1 << (3 - i))) != 0); |
| if (positive_mask == positive_cond) { |
| opcode << 't'; |
| it_conditions_[i] = kConditionCodeNames[first_cond]; |
| } else { |
| opcode << 'e'; |
| it_conditions_[i] = kConditionCodeNames[first_cond ^ 1]; |
| } |
| } |
| it_conditions_[count] = kConditionCodeNames[first_cond]; // The implicit 't'. |
| |
| it_conditions_[count + 1] = ""; // No condition code for the IT itself... |
| DumpCond(args, first_cond); // ...because it's considered an argument. |
| } |
| break; |
| } |
| default: |
| break; |
| } |
| } else if (((instr & 0xF000) == 0x5000) || ((instr & 0xE000) == 0x6000) || |
| ((instr & 0xE000) == 0x8000)) { |
| // Load/store single data item |
| uint16_t opA = instr >> 12; |
| //uint16_t opB = (instr >> 9) & 7; |
| switch (opA) { |
| case 0x6: { |
| // STR Rt, [Rn, #imm] - 01100 iiiii nnn ttt |
| // LDR Rt, [Rn, #imm] - 01101 iiiii nnn ttt |
| uint16_t imm5 = (instr >> 6) & 0x1F; |
| ThumbRegister Rn(instr, 3); |
| ThumbRegister Rt(instr, 0); |
| opcode << ((instr & 0x800) == 0 ? "str" : "ldr"); |
| args << Rt << ", [" << Rn << ", #" << (imm5 << 2) << "]"; |
| break; |
| } |
| case 0x9: { |
| // STR Rt, [SP, #imm] - 01100 ttt iiiiiiii |
| // LDR Rt, [SP, #imm] - 01101 ttt iiiiiiii |
| uint16_t imm8 = instr & 0xFF; |
| ThumbRegister Rt(instr, 8); |
| opcode << ((instr & 0x800) == 0 ? "str" : "ldr"); |
| args << Rt << ", [sp, #" << (imm8 << 2) << "]"; |
| break; |
| } |
| default: |
| break; |
| } |
| } else if (opcode1 == 0x38 || opcode1 == 0x39) { |
| uint16_t imm11 = instr & 0x7FFF; |
| int32_t imm32 = imm11 << 1; |
| imm32 = (imm32 << 20) >> 20; // sign extend 12 bit immediate |
| opcode << "b"; |
| DumpBranchTarget(args, instr_ptr + 4, imm32); |
| } |
| |
| // Apply any IT-block conditions to the opcode if necessary. |
| if (!it_conditions_.empty()) { |
| opcode << it_conditions_.back(); |
| it_conditions_.pop_back(); |
| } |
| |
| os << StringPrintf("\t\t\t%p: %04x \t%-7s ", instr_ptr, instr, opcode.str().c_str()) << args.str() << '\n'; |
| } |
| return 2; |
| } |
| |
| } // namespace arm |
| } // namespace art |