compiler/optimizing/ssa_phi_elimination.cc - platform/art - Gitiles

 /*
  * Copyright (C) 2014 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "ssa_phi_elimination.h"

 #include "base/arena_containers.h"
 #include "base/arena_bit_vector.h"
 #include "base/bit_vector-inl.h"

 namespace art {

 void SsaDeadPhiElimination::Run() {
   MarkDeadPhis();
   EliminateDeadPhis();
 }

 void SsaDeadPhiElimination::MarkDeadPhis() {
   // Phis are constructed live and should not be revived if previously marked
   // dead. This algorithm temporarily breaks that invariant but we DCHECK that
   // only phis which were initially live are revived.
   ArenaSet<HPhi*> initially_live(graph_->GetArena()->Adapter(kArenaAllocSsaPhiElimination));

   // Add to the worklist phis referenced by non-phi instructions.
   for (HBasicBlock* block : graph_->GetReversePostOrder()) {
     for (HInstructionIterator inst_it(block->GetPhis()); !inst_it.Done(); inst_it.Advance()) {
       HPhi* phi = inst_it.Current()->AsPhi();
       if (phi->IsDead()) {
         continue;
       }

       bool keep_alive = (graph_->IsDebuggable() && phi->HasEnvironmentUses());
       if (!keep_alive) {
         for (const HUseListNode<HInstruction*>& use : phi->GetUses()) {
           if (!use.GetUser()->IsPhi()) {
             keep_alive = true;
             break;
           }
         }
       }

       if (keep_alive) {
         worklist_.push_back(phi);
       } else {
         phi->SetDead();
         if (kIsDebugBuild) {
           initially_live.insert(phi);
         }
       }
     }
   }

   // Process the worklist by propagating liveness to phi inputs.
   while (!worklist_.empty()) {
     HPhi* phi = worklist_.back();
     worklist_.pop_back();
     for (HInstruction* raw_input : phi->GetInputs()) {
       HPhi* input = raw_input->AsPhi();
       if (input != nullptr && input->IsDead()) {
         // Input is a dead phi. Revive it and add to the worklist. We make sure
         // that the phi was not dead initially (see definition of `initially_live`).
         DCHECK(ContainsElement(initially_live, input));
         input->SetLive();
         worklist_.push_back(input);
       }
     }
   }
 }

 void SsaDeadPhiElimination::EliminateDeadPhis() {
   // Remove phis that are not live. Visit in post order so that phis
   // that are not inputs of loop phis can be removed when they have
   // no users left (dead phis might use dead phis).
   for (HBasicBlock* block : graph_->GetPostOrder()) {
     HInstruction* current = block->GetFirstPhi();
     HInstruction* next = nullptr;
     HPhi* phi;
     while (current != nullptr) {
       phi = current->AsPhi();
       next = current->GetNext();
       if (phi->IsDead()) {
         // Make sure the phi is only used by other dead phis.
         if (kIsDebugBuild) {
           for (const HUseListNode<HInstruction*>& use : phi->GetUses()) {
             HInstruction* user = use.GetUser();
             DCHECK(user->IsLoopHeaderPhi());
             DCHECK(user->AsPhi()->IsDead());
           }
         }
         // Remove the phi from use lists of its inputs.
         phi->RemoveAsUserOfAllInputs();
         // Remove the phi from environments that use it.
         for (const HUseListNode<HEnvironment*>& use : phi->GetEnvUses()) {
           HEnvironment* user = use.GetUser();
           user->SetRawEnvAt(use.GetIndex(), nullptr);
         }
         // Delete it from the instruction list.
         block->RemovePhi(phi, /*ensure_safety=*/ false);
       }
       current = next;
     }
   }
 }

 void SsaRedundantPhiElimination::Run() {
   // Add all phis in the worklist. Order does not matter for correctness, and
   // neither will necessarily converge faster.
   for (HBasicBlock* block : graph_->GetReversePostOrder()) {
     for (HInstructionIterator inst_it(block->GetPhis()); !inst_it.Done(); inst_it.Advance()) {
       worklist_.push_back(inst_it.Current()->AsPhi());
     }
   }

   ArenaBitVector visited_phis_in_cycle(graph_->GetArena(),
                                        graph_->GetCurrentInstructionId(),
                                        /* expandable */ false,
                                        kArenaAllocSsaPhiElimination);
   ArenaVector<HPhi*> cycle_worklist(graph_->GetArena()->Adapter(kArenaAllocSsaPhiElimination));

   while (!worklist_.empty()) {
     HPhi* phi = worklist_.back();
     worklist_.pop_back();

     // If the phi has already been processed, continue.
     if (!phi->IsInBlock()) {
       continue;
     }

     // If the phi is dead, we know we won't revive it and it will be removed,
     // so don't process it.
     if (phi->IsDead()) {
       continue;
     }

     HInstruction* candidate = nullptr;
     visited_phis_in_cycle.ClearAllBits();
     cycle_worklist.clear();

     cycle_worklist.push_back(phi);
     visited_phis_in_cycle.SetBit(phi->GetId());
     bool catch_phi_in_cycle = phi->IsCatchPhi();
     bool irreducible_loop_phi_in_cycle = phi->IsIrreducibleLoopHeaderPhi();

     // First do a simple loop over inputs and check if they are all the same.
     for (HInstruction* input : phi->GetInputs()) {
       if (input == phi) {
         continue;
       } else if (candidate == nullptr) {
         candidate = input;
       } else if (candidate != input) {
         candidate = nullptr;
         break;
       }
     }

     // If we haven't found a candidate, check for a phi cycle. Note that we need to detect
     // such cycles to avoid having reference and non-reference equivalents. We check this
     // invariant in the graph checker.
     if (candidate == nullptr) {
       // We iterate over the array as long as it grows.
       for (size_t i = 0; i < cycle_worklist.size(); ++i) {
         HPhi* current = cycle_worklist[i];
         DCHECK(!current->IsLoopHeaderPhi() ||
                current->GetBlock()->IsLoopPreHeaderFirstPredecessor());

         for (HInstruction* input : current->GetInputs()) {
           if (input == current) {
             continue;
           } else if (input->IsPhi()) {
             if (!visited_phis_in_cycle.IsBitSet(input->GetId())) {
               cycle_worklist.push_back(input->AsPhi());
               visited_phis_in_cycle.SetBit(input->GetId());
               catch_phi_in_cycle |= input->AsPhi()->IsCatchPhi();
               irreducible_loop_phi_in_cycle |= input->IsIrreducibleLoopHeaderPhi();
             } else {
               // Already visited, nothing to do.
             }
           } else if (candidate == nullptr) {
             candidate = input;
           } else if (candidate != input) {
             candidate = nullptr;
             // Clear the cycle worklist to break out of the outer loop.
             cycle_worklist.clear();
             break;
           }
         }
       }
     }

     if (candidate == nullptr) {
       continue;
     }

     if (irreducible_loop_phi_in_cycle && !candidate->IsConstant()) {
       // For irreducible loops, we need to keep the phis to satisfy our linear scan
       // algorithm.
       // There is one exception for constants, as the type propagation requires redundant
       // cyclic phis of a constant to be removed. This is ok for the linear scan as it
       // has to deal with constants anyway, and they can trivially be rematerialized.
       continue;
     }

     for (HPhi* current : cycle_worklist) {
       // The candidate may not dominate a phi in a catch block: there may be non-throwing
       // instructions at the beginning of a try range, that may be the first input of
       // catch phis.
       // TODO(dbrazdil): Remove this situation by moving those non-throwing instructions
       // before the try entry.
       if (catch_phi_in_cycle) {
         if (!candidate->StrictlyDominates(current)) {
           continue;
         }
       } else {
         DCHECK(candidate->StrictlyDominates(current));
       }

       // Because we're updating the users of this phi, we may have new candidates
       // for elimination. Add phis that use this phi to the worklist.
       for (const HUseListNode<HInstruction*>& use : current->GetUses()) {
         HInstruction* user = use.GetUser();
         if (user->IsPhi() && !visited_phis_in_cycle.IsBitSet(user->GetId())) {
           worklist_.push_back(user->AsPhi());
         }
       }
       DCHECK(candidate->StrictlyDominates(current));
       current->ReplaceWith(candidate);
       current->GetBlock()->RemovePhi(current);
     }
   }
 }

 }  // namespace art
	/*
	* Copyright (C) 2014 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "ssa_phi_elimination.h"

	#include "base/arena_containers.h"
	#include "base/arena_bit_vector.h"
	#include "base/bit_vector-inl.h"

	namespace art {

	void SsaDeadPhiElimination::Run() {
	MarkDeadPhis();
	EliminateDeadPhis();
	}

	void SsaDeadPhiElimination::MarkDeadPhis() {
	// Phis are constructed live and should not be revived if previously marked
	// dead. This algorithm temporarily breaks that invariant but we DCHECK that
	// only phis which were initially live are revived.
	ArenaSet<HPhi*> initially_live(graph_->GetArena()->Adapter(kArenaAllocSsaPhiElimination));

	// Add to the worklist phis referenced by non-phi instructions.
	for (HBasicBlock* block : graph_->GetReversePostOrder()) {
	for (HInstructionIterator inst_it(block->GetPhis()); !inst_it.Done(); inst_it.Advance()) {
	HPhi* phi = inst_it.Current()->AsPhi();
	if (phi->IsDead()) {
	continue;
	}

	bool keep_alive = (graph_->IsDebuggable() && phi->HasEnvironmentUses());
	if (!keep_alive) {
	for (const HUseListNode<HInstruction*>& use : phi->GetUses()) {
	if (!use.GetUser()->IsPhi()) {
	keep_alive = true;
	break;
	}
	}
	}

	if (keep_alive) {
	worklist_.push_back(phi);
	} else {
	phi->SetDead();
	if (kIsDebugBuild) {
	initially_live.insert(phi);
	}
	}
	}
	}

	// Process the worklist by propagating liveness to phi inputs.
	while (!worklist_.empty()) {
	HPhi* phi = worklist_.back();
	worklist_.pop_back();
	for (HInstruction* raw_input : phi->GetInputs()) {
	HPhi* input = raw_input->AsPhi();
	if (input != nullptr && input->IsDead()) {
	// Input is a dead phi. Revive it and add to the worklist. We make sure
	// that the phi was not dead initially (see definition of `initially_live`).
	DCHECK(ContainsElement(initially_live, input));
	input->SetLive();
	worklist_.push_back(input);
	}
	}
	}
	}

	void SsaDeadPhiElimination::EliminateDeadPhis() {
	// Remove phis that are not live. Visit in post order so that phis
	// that are not inputs of loop phis can be removed when they have
	// no users left (dead phis might use dead phis).
	for (HBasicBlock* block : graph_->GetPostOrder()) {
	HInstruction* current = block->GetFirstPhi();
	HInstruction* next = nullptr;
	HPhi* phi;
	while (current != nullptr) {
	phi = current->AsPhi();
	next = current->GetNext();
	if (phi->IsDead()) {
	// Make sure the phi is only used by other dead phis.
	if (kIsDebugBuild) {
	for (const HUseListNode<HInstruction*>& use : phi->GetUses()) {
	HInstruction* user = use.GetUser();
	DCHECK(user->IsLoopHeaderPhi());
	DCHECK(user->AsPhi()->IsDead());
	}
	}
	// Remove the phi from use lists of its inputs.
	phi->RemoveAsUserOfAllInputs();
	// Remove the phi from environments that use it.
	for (const HUseListNode<HEnvironment*>& use : phi->GetEnvUses()) {
	HEnvironment* user = use.GetUser();
	user->SetRawEnvAt(use.GetIndex(), nullptr);
	}
	// Delete it from the instruction list.
	block->RemovePhi(phi, /ensure_safety=/ false);
	}
	current = next;
	}
	}
	}

	void SsaRedundantPhiElimination::Run() {
	// Add all phis in the worklist. Order does not matter for correctness, and
	// neither will necessarily converge faster.
	for (HBasicBlock* block : graph_->GetReversePostOrder()) {
	for (HInstructionIterator inst_it(block->GetPhis()); !inst_it.Done(); inst_it.Advance()) {
	worklist_.push_back(inst_it.Current()->AsPhi());
	}
	}

	ArenaBitVector visited_phis_in_cycle(graph_->GetArena(),
	graph_->GetCurrentInstructionId(),
	/* expandable */ false,
	kArenaAllocSsaPhiElimination);
	ArenaVector<HPhi*> cycle_worklist(graph_->GetArena()->Adapter(kArenaAllocSsaPhiElimination));

	while (!worklist_.empty()) {
	HPhi* phi = worklist_.back();
	worklist_.pop_back();

	// If the phi has already been processed, continue.
	if (!phi->IsInBlock()) {
	continue;
	}

	// If the phi is dead, we know we won't revive it and it will be removed,
	// so don't process it.
	if (phi->IsDead()) {
	continue;
	}

	HInstruction* candidate = nullptr;
	visited_phis_in_cycle.ClearAllBits();
	cycle_worklist.clear();

	cycle_worklist.push_back(phi);
	visited_phis_in_cycle.SetBit(phi->GetId());
	bool catch_phi_in_cycle = phi->IsCatchPhi();
	bool irreducible_loop_phi_in_cycle = phi->IsIrreducibleLoopHeaderPhi();

	// First do a simple loop over inputs and check if they are all the same.
	for (HInstruction* input : phi->GetInputs()) {
	if (input == phi) {
	continue;
	} else if (candidate == nullptr) {
	candidate = input;
	} else if (candidate != input) {
	candidate = nullptr;
	break;
	}
	}

	// If we haven't found a candidate, check for a phi cycle. Note that we need to detect
	// such cycles to avoid having reference and non-reference equivalents. We check this
	// invariant in the graph checker.
	if (candidate == nullptr) {
	// We iterate over the array as long as it grows.
	for (size_t i = 0; i < cycle_worklist.size(); ++i) {
	HPhi* current = cycle_worklist[i];
	DCHECK(!current->IsLoopHeaderPhi() \|\|
	current->GetBlock()->IsLoopPreHeaderFirstPredecessor());

	for (HInstruction* input : current->GetInputs()) {
	if (input == current) {
	continue;
	} else if (input->IsPhi()) {
	if (!visited_phis_in_cycle.IsBitSet(input->GetId())) {
	cycle_worklist.push_back(input->AsPhi());
	visited_phis_in_cycle.SetBit(input->GetId());
	catch_phi_in_cycle \|= input->AsPhi()->IsCatchPhi();
	irreducible_loop_phi_in_cycle \|= input->IsIrreducibleLoopHeaderPhi();
	} else {
	// Already visited, nothing to do.
	}
	} else if (candidate == nullptr) {
	candidate = input;
	} else if (candidate != input) {
	candidate = nullptr;
	// Clear the cycle worklist to break out of the outer loop.
	cycle_worklist.clear();
	break;
	}
	}
	}
	}

	if (candidate == nullptr) {
	continue;
	}

	if (irreducible_loop_phi_in_cycle && !candidate->IsConstant()) {
	// For irreducible loops, we need to keep the phis to satisfy our linear scan
	// algorithm.
	// There is one exception for constants, as the type propagation requires redundant
	// cyclic phis of a constant to be removed. This is ok for the linear scan as it
	// has to deal with constants anyway, and they can trivially be rematerialized.
	continue;
	}

	for (HPhi* current : cycle_worklist) {
	// The candidate may not dominate a phi in a catch block: there may be non-throwing
	// instructions at the beginning of a try range, that may be the first input of
	// catch phis.
	// TODO(dbrazdil): Remove this situation by moving those non-throwing instructions
	// before the try entry.
	if (catch_phi_in_cycle) {
	if (!candidate->StrictlyDominates(current)) {
	continue;
	}
	} else {
	DCHECK(candidate->StrictlyDominates(current));
	}

	// Because we're updating the users of this phi, we may have new candidates
	// for elimination. Add phis that use this phi to the worklist.
	for (const HUseListNode<HInstruction*>& use : current->GetUses()) {
	HInstruction* user = use.GetUser();
	if (user->IsPhi() && !visited_phis_in_cycle.IsBitSet(user->GetId())) {
	worklist_.push_back(user->AsPhi());
	}
	}
	DCHECK(candidate->StrictlyDominates(current));
	current->ReplaceWith(candidate);
	current->GetBlock()->RemovePhi(current);
	}
	}
	}

	} // namespace art