Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / art / 467d94a3d926620b01b034eff68fdcaf2b5fb579 / . / runtime / interpreter / mterp / out / mterp_arm.S
blob: 891624160bee290669b0252b35c8fab724831df4 [file] [log] [blame]
/*
* This file was generated automatically by gen-mterp.py for 'arm'.
*
* --> DO NOT EDIT <--
*/
/* File: arm/header.S */
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
Art assembly interpreter notes:
First validate assembly code by implementing ExecuteXXXImpl() style body (doesn't
handle invoke, allows higher-level code to create frame & shadow frame.
Once that's working, support direct entry code & eliminate shadow frame (and
excess locals allocation.
Some (hopefully) temporary ugliness. We'll treat rFP as pointing to the
base of the vreg array within the shadow frame. Access the other fields,
dex_pc_, method_ and number_of_vregs_ via negative offsets. For now, we'll continue
the shadow frame mechanism of double-storing object references - via rFP &
number_of_vregs_.
*/
/*
ARM EABI general notes:
r0-r3 hold first 4 args to a method; they are not preserved across method calls
r4-r8 are available for general use
r9 is given special treatment in some situations, but not for us
r10 (sl) seems to be generally available
r11 (fp) is used by gcc (unless -fomit-frame-pointer is set)
r12 (ip) is scratch -- not preserved across method calls
r13 (sp) should be managed carefully in case a signal arrives
r14 (lr) must be preserved
r15 (pc) can be tinkered with directly
r0 holds returns of <= 4 bytes
r0-r1 hold returns of 8 bytes, low word in r0
Callee must save/restore r4+ (except r12) if it modifies them. If VFP
is present, registers s16-s31 (a/k/a d8-d15, a/k/a q4-q7) must be preserved,
s0-s15 (d0-d7, q0-a3) do not need to be.
Stack is "full descending". Only the arguments that don't fit in the first 4
registers are placed on the stack. "sp" points at the first stacked argument
(i.e. the 5th arg).
VFP: single-precision results in s0, double-precision results in d0.
In the EABI, "sp" must be 64-bit aligned on entry to a function, and any
64-bit quantities (long long, double) must be 64-bit aligned.
*/
/*
Mterp and ARM notes:
The following registers have fixed assignments:
reg nick purpose
r4 rPC interpreted program counter, used for fetching instructions
r5 rFP interpreted frame pointer, used for accessing locals and args
r6 rSELF self (Thread) pointer
r7 rINST first 16-bit code unit of current instruction
r8 rIBASE interpreted instruction base pointer, used for computed goto
r10 rPROFILE branch profiling countdown
r11 rREFS base of object references in shadow frame (ideally, we'll get rid of this later).
Macros are provided for common operations. Each macro MUST emit only
one instruction to make instruction-counting easier. They MUST NOT alter
unspecified registers or condition codes.
*/
/*
* This is a #include, not a %include, because we want the C pre-processor
* to expand the macros into assembler assignment statements.
*/
#include "asm_support.h"
#define MTERP_PROFILE_BRANCHES 1
#define MTERP_LOGGING 0
/* During bringup, we'll use the shadow frame model instead of rFP */
/* single-purpose registers, given names for clarity */
#define rPC r4
#define rFP r5
#define rSELF r6
#define rINST r7
#define rIBASE r8
#define rPROFILE r10
#define rREFS r11
/*
* Instead of holding a pointer to the shadow frame, we keep rFP at the base of the vregs. So,
* to access other shadow frame fields, we need to use a backwards offset. Define those here.
*/
#define OFF_FP(a) (a - SHADOWFRAME_VREGS_OFFSET)
#define OFF_FP_NUMBER_OF_VREGS OFF_FP(SHADOWFRAME_NUMBER_OF_VREGS_OFFSET)
#define OFF_FP_DEX_PC OFF_FP(SHADOWFRAME_DEX_PC_OFFSET)
#define OFF_FP_LINK OFF_FP(SHADOWFRAME_LINK_OFFSET)
#define OFF_FP_METHOD OFF_FP(SHADOWFRAME_METHOD_OFFSET)
#define OFF_FP_RESULT_REGISTER OFF_FP(SHADOWFRAME_RESULT_REGISTER_OFFSET)
#define OFF_FP_DEX_PC_PTR OFF_FP(SHADOWFRAME_DEX_PC_PTR_OFFSET)
#define OFF_FP_CODE_ITEM OFF_FP(SHADOWFRAME_CODE_ITEM_OFFSET)
#define OFF_FP_SHADOWFRAME OFF_FP(0)
/*
* "export" the PC to dex_pc field in the shadow frame, f/b/o future exception objects. Must
* be done *before* something throws.
*
* It's okay to do this more than once.
*
* NOTE: the fast interpreter keeps track of dex pc as a direct pointer to the mapped
* dex byte codes. However, the rest of the runtime expects dex pc to be an instruction
* offset into the code_items_[] array. For effiency, we will "export" the
* current dex pc as a direct pointer using the EXPORT_PC macro, and rely on GetDexPC
* to convert to a dex pc when needed.
*/
.macro EXPORT_PC
str rPC, [rFP, #OFF_FP_DEX_PC_PTR]
.endm
.macro EXPORT_DEX_PC tmp
ldr \tmp, [rFP, #OFF_FP_CODE_ITEM]
str rPC, [rFP, #OFF_FP_DEX_PC_PTR]
add \tmp, #CODEITEM_INSNS_OFFSET
sub \tmp, rPC, \tmp
asr \tmp, #1
str \tmp, [rFP, #OFF_FP_DEX_PC]
.endm
/*
* Fetch the next instruction from rPC into rINST. Does not advance rPC.
*/
.macro FETCH_INST
ldrh rINST, [rPC]
.endm
/*
* Fetch the next instruction from the specified offset. Advances rPC
* to point to the next instruction. "_count" is in 16-bit code units.
*
* Because of the limited size of immediate constants on ARM, this is only
* suitable for small forward movements (i.e. don't try to implement "goto"
* with this).
*
* This must come AFTER anything that can throw an exception, or the
* exception catch may miss. (This also implies that it must come after
* EXPORT_PC.)
*/
.macro FETCH_ADVANCE_INST count
ldrh rINST, [rPC, #((\count)*2)]!
.endm
/*
* The operation performed here is similar to FETCH_ADVANCE_INST, except the
* src and dest registers are parameterized (not hard-wired to rPC and rINST).
*/
.macro PREFETCH_ADVANCE_INST dreg, sreg, count
ldrh \dreg, [\sreg, #((\count)*2)]!
.endm
/*
* Similar to FETCH_ADVANCE_INST, but does not update rPC. Used to load
* rINST ahead of possible exception point. Be sure to manually advance rPC
* later.
*/
.macro PREFETCH_INST count
ldrh rINST, [rPC, #((\count)*2)]
.endm
/* Advance rPC by some number of code units. */
.macro ADVANCE count
add rPC, #((\count)*2)
.endm
/*
* Fetch the next instruction from an offset specified by _reg. Updates
* rPC to point to the next instruction. "_reg" must specify the distance
* in bytes, *not* 16-bit code units, and may be a signed value.
*
* We want to write "ldrh rINST, [rPC, _reg, lsl #1]!", but some of the
* bits that hold the shift distance are used for the half/byte/sign flags.
* In some cases we can pre-double _reg for free, so we require a byte offset
* here.
*/
.macro FETCH_ADVANCE_INST_RB reg
ldrh rINST, [rPC, \reg]!
.endm
/*
* Fetch a half-word code unit from an offset past the current PC. The
* "_count" value is in 16-bit code units. Does not advance rPC.
*
* The "_S" variant works the same but treats the value as signed.
*/
.macro FETCH reg, count
ldrh \reg, [rPC, #((\count)*2)]
.endm
.macro FETCH_S reg, count
ldrsh \reg, [rPC, #((\count)*2)]
.endm
/*
* Fetch one byte from an offset past the current PC. Pass in the same
* "_count" as you would for FETCH, and an additional 0/1 indicating which
* byte of the halfword you want (lo/hi).
*/
.macro FETCH_B reg, count, byte
ldrb \reg, [rPC, #((\count)*2+(\byte))]
.endm
/*
* Put the instruction's opcode field into the specified register.
*/
.macro GET_INST_OPCODE reg
and \reg, rINST, #255
.endm
/*
* Put the prefetched instruction's opcode field into the specified register.
*/
.macro GET_PREFETCHED_OPCODE oreg, ireg
and \oreg, \ireg, #255
.endm
/*
* Begin executing the opcode in _reg. Because this only jumps within the
* interpreter, we don't have to worry about pre-ARMv5 THUMB interwork.
*/
.macro GOTO_OPCODE reg
add pc, rIBASE, \reg, lsl #7
.endm
.macro GOTO_OPCODE_BASE base,reg
add pc, \base, \reg, lsl #7
.endm
/*
* Get/set the 32-bit value from a Dalvik register.
*/
.macro GET_VREG reg, vreg
ldr \reg, [rFP, \vreg, lsl #2]
.endm
.macro SET_VREG reg, vreg
str \reg, [rFP, \vreg, lsl #2]
mov \reg, #0
str \reg, [rREFS, \vreg, lsl #2]
.endm
.macro SET_VREG_OBJECT reg, vreg, tmpreg
str \reg, [rFP, \vreg, lsl #2]
str \reg, [rREFS, \vreg, lsl #2]
.endm
.macro SET_VREG_SHADOW reg, vreg
str \reg, [rREFS, \vreg, lsl #2]
.endm
/*
* Clear the corresponding shadow regs for a vreg pair
*/
.macro CLEAR_SHADOW_PAIR vreg, tmp1, tmp2
mov \tmp1, #0
add \tmp2, \vreg, #1
SET_VREG_SHADOW \tmp1, \vreg
SET_VREG_SHADOW \tmp1, \tmp2
.endm
/*
* Convert a virtual register index into an address.
*/
.macro VREG_INDEX_TO_ADDR reg, vreg
add \reg, rFP, \vreg, lsl #2 /* WARNING/FIXME: handle shadow frame vreg zero if store */
.endm
/*
* Refresh handler table.
*/
.macro REFRESH_IBASE
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET]
.endm
/*
* cfi support macros.
*/
.macro ENTRY name
.arm
.type \name, #function
.hidden \name // Hide this as a global symbol, so we do not incur plt calls.
.global \name
/* Cache alignment for function entry */
.balign 16
\name:
.cfi_startproc
.fnstart
.endm
.macro END name
.fnend
.cfi_endproc
.size \name, .-\name
.endm
/* File: arm/entry.S */
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Interpreter entry point.
*/
.text
.align 2
.global ExecuteMterpImpl
.type ExecuteMterpImpl, %function
/*
* On entry:
* r0 Thread* self/
* r1 code_item
* r2 ShadowFrame
* r3 JValue* result_register
*
*/
ENTRY ExecuteMterpImpl
stmfd sp!, {r3-r10,fp,lr} @ save 10 regs, (r3 just to align 64)
.cfi_adjust_cfa_offset 40
.cfi_rel_offset r3, 0
.cfi_rel_offset r4, 4
.cfi_rel_offset r5, 8
.cfi_rel_offset r6, 12
.cfi_rel_offset r7, 16
.cfi_rel_offset r8, 20
.cfi_rel_offset r9, 24
.cfi_rel_offset r10, 28
.cfi_rel_offset fp, 32
.cfi_rel_offset lr, 36
/* Remember the return register */
str r3, [r2, #SHADOWFRAME_RESULT_REGISTER_OFFSET]
/* Remember the code_item */
str r1, [r2, #SHADOWFRAME_CODE_ITEM_OFFSET]
/* set up "named" registers */
mov rSELF, r0
ldr r0, [r2, #SHADOWFRAME_NUMBER_OF_VREGS_OFFSET]
add rFP, r2, #SHADOWFRAME_VREGS_OFFSET @ point to vregs.
VREG_INDEX_TO_ADDR rREFS, r0 @ point to reference array in shadow frame
ldr r0, [r2, #SHADOWFRAME_DEX_PC_OFFSET] @ Get starting dex_pc.
add rPC, r1, #CODEITEM_INSNS_OFFSET @ Point to base of insns[]
add rPC, rPC, r0, lsl #1 @ Create direct pointer to 1st dex opcode
EXPORT_PC
/* Starting ibase */
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET]
/* Set up for backwards branches & osr profiling */
ldr r0, [rFP, #OFF_FP_METHOD]
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpSetUpHotnessCountdown
mov rPROFILE, r0 @ Starting hotness countdown to rPROFILE
/* start executing the instruction at rPC */
FETCH_INST @ load rINST from rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* NOTE: no fallthrough */
.global artMterpAsmInstructionStart
.type artMterpAsmInstructionStart, %function
artMterpAsmInstructionStart = .L_op_nop
.text
/* ------------------------------ */
.balign 128
.L_op_nop: /* 0x00 */
/* File: arm/op_nop.S */
FETCH_ADVANCE_INST 1 @ advance to next instr, load rINST
GET_INST_OPCODE ip @ ip<- opcode from rINST
GOTO_OPCODE ip @ execute it
/* ------------------------------ */
.balign 128
.L_op_move: /* 0x01 */
/* File: arm/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
mov r1, rINST, lsr #12 @ r1<- B from 15:12
ubfx r0, rINST, #8, #4 @ r0<- A from 11:8
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
GET_VREG r2, r1 @ r2<- fp[B]
GET_INST_OPCODE ip @ ip<- opcode from rINST
.if 0
SET_VREG_OBJECT r2, r0 @ fp[A]<- r2
.else
SET_VREG r2, r0 @ fp[A]<- r2
.endif
GOTO_OPCODE ip @ execute next instruction
/* ------------------------------ */
.balign 128
.L_op_move_from16: /* 0x02 */
/* File: arm/op_move_from16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
FETCH r1, 1 @ r1<- BBBB
mov r0, rINST, lsr #8 @ r0<- AA
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_VREG r2, r1 @ r2<- fp[BBBB]
GET_INST_OPCODE ip @ extract opcode from rINST
.if 0
SET_VREG_OBJECT r2, r0 @ fp[AA]<- r2
.else
SET_VREG r2, r0 @ fp[AA]<- r2
.endif
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_16: /* 0x03 */
/* File: arm/op_move_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
FETCH r1, 2 @ r1<- BBBB
FETCH r0, 1 @ r0<- AAAA
FETCH_ADVANCE_INST 3 @ advance rPC, load rINST
GET_VREG r2, r1 @ r2<- fp[BBBB]
GET_INST_OPCODE ip @ extract opcode from rINST
.if 0
SET_VREG_OBJECT r2, r0 @ fp[AAAA]<- r2
.else
SET_VREG r2, r0 @ fp[AAAA]<- r2
.endif
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide: /* 0x04 */
/* File: arm/op_move_wide.S */
/* move-wide vA, vB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
mov r3, rINST, lsr #12 @ r3<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[B]
VREG_INDEX_TO_ADDR r2, rINST @ r2<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- fp[B]
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero out the shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r2, {r0-r1} @ fp[A]<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide_from16: /* 0x05 */
/* File: arm/op_move_wide_from16.S */
/* move-wide/from16 vAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
FETCH r3, 1 @ r3<- BBBB
mov rINST, rINST, lsr #8 @ rINST<- AA
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[BBBB]
VREG_INDEX_TO_ADDR r2, rINST @ r2<- &fp[AA]
ldmia r3, {r0-r1} @ r0/r1<- fp[BBBB]
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r2, {r0-r1} @ fp[AA]<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide_16: /* 0x06 */
/* File: arm/op_move_wide_16.S */
/* move-wide/16 vAAAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
FETCH r3, 2 @ r3<- BBBB
FETCH r2, 1 @ r2<- AAAA
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[BBBB]
VREG_INDEX_TO_ADDR lr, r2 @ r2<- &fp[AAAA]
ldmia r3, {r0-r1} @ r0/r1<- fp[BBBB]
FETCH_ADVANCE_INST 3 @ advance rPC, load rINST
CLEAR_SHADOW_PAIR r2, r3, ip @ Zero out the shadow regs
stmia lr, {r0-r1} @ fp[AAAA]<- r0/r1
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object: /* 0x07 */
/* File: arm/op_move_object.S */
/* File: arm/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
mov r1, rINST, lsr #12 @ r1<- B from 15:12
ubfx r0, rINST, #8, #4 @ r0<- A from 11:8
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
GET_VREG r2, r1 @ r2<- fp[B]
GET_INST_OPCODE ip @ ip<- opcode from rINST
.if 1
SET_VREG_OBJECT r2, r0 @ fp[A]<- r2
.else
SET_VREG r2, r0 @ fp[A]<- r2
.endif
GOTO_OPCODE ip @ execute next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object_from16: /* 0x08 */
/* File: arm/op_move_object_from16.S */
/* File: arm/op_move_from16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
FETCH r1, 1 @ r1<- BBBB
mov r0, rINST, lsr #8 @ r0<- AA
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_VREG r2, r1 @ r2<- fp[BBBB]
GET_INST_OPCODE ip @ extract opcode from rINST
.if 1
SET_VREG_OBJECT r2, r0 @ fp[AA]<- r2
.else
SET_VREG r2, r0 @ fp[AA]<- r2
.endif
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object_16: /* 0x09 */
/* File: arm/op_move_object_16.S */
/* File: arm/op_move_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
FETCH r1, 2 @ r1<- BBBB
FETCH r0, 1 @ r0<- AAAA
FETCH_ADVANCE_INST 3 @ advance rPC, load rINST
GET_VREG r2, r1 @ r2<- fp[BBBB]
GET_INST_OPCODE ip @ extract opcode from rINST
.if 1
SET_VREG_OBJECT r2, r0 @ fp[AAAA]<- r2
.else
SET_VREG r2, r0 @ fp[AAAA]<- r2
.endif
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result: /* 0x0a */
/* File: arm/op_move_result.S */
/* for: move-result, move-result-object */
/* op vAA */
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
ldr r0, [rFP, #OFF_FP_RESULT_REGISTER] @ get pointer to result JType.
ldr r0, [r0] @ r0 <- result.i.
GET_INST_OPCODE ip @ extract opcode from rINST
.if 0
SET_VREG_OBJECT r0, r2, r1 @ fp[AA]<- r0
.else
SET_VREG r0, r2 @ fp[AA]<- r0
.endif
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result_wide: /* 0x0b */
/* File: arm/op_move_result_wide.S */
/* move-result-wide vAA */
mov rINST, rINST, lsr #8 @ rINST<- AA
ldr r3, [rFP, #OFF_FP_RESULT_REGISTER]
VREG_INDEX_TO_ADDR r2, rINST @ r2<- &fp[AA]
ldmia r3, {r0-r1} @ r0/r1<- retval.j
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero out the shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
stmia r2, {r0-r1} @ fp[AA]<- r0/r1
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result_object: /* 0x0c */
/* File: arm/op_move_result_object.S */
/* File: arm/op_move_result.S */
/* for: move-result, move-result-object */
/* op vAA */
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
ldr r0, [rFP, #OFF_FP_RESULT_REGISTER] @ get pointer to result JType.
ldr r0, [r0] @ r0 <- result.i.
GET_INST_OPCODE ip @ extract opcode from rINST
.if 1
SET_VREG_OBJECT r0, r2, r1 @ fp[AA]<- r0
.else
SET_VREG r0, r2 @ fp[AA]<- r0
.endif
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_exception: /* 0x0d */
/* File: arm/op_move_exception.S */
/* move-exception vAA */
mov r2, rINST, lsr #8 @ r2<- AA
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
mov r1, #0 @ r1<- 0
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
SET_VREG_OBJECT r3, r2 @ fp[AA]<- exception obj
GET_INST_OPCODE ip @ extract opcode from rINST
str r1, [rSELF, #THREAD_EXCEPTION_OFFSET] @ clear exception
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_return_void: /* 0x0e */
/* File: arm/op_return_void.S */
.extern MterpThreadFenceForConstructor
bl MterpThreadFenceForConstructor
ldr lr, [rSELF, #THREAD_FLAGS_OFFSET]
mov r0, rSELF
ands lr, #THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
blne MterpSuspendCheck @ (self)
mov r0, #0
mov r1, #0
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return: /* 0x0f */
/* File: arm/op_return.S */
/*
* Return a 32-bit value.
*
* for: return, return-object
*/
/* op vAA */
.extern MterpThreadFenceForConstructor
bl MterpThreadFenceForConstructor
ldr lr, [rSELF, #THREAD_FLAGS_OFFSET]
mov r0, rSELF
ands lr, #THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
blne MterpSuspendCheck @ (self)
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG r0, r2 @ r0<- vAA
mov r1, #0
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return_wide: /* 0x10 */
/* File: arm/op_return_wide.S */
/*
* Return a 64-bit value.
*/
/* return-wide vAA */
.extern MterpThreadFenceForConstructor
bl MterpThreadFenceForConstructor
ldr lr, [rSELF, #THREAD_FLAGS_OFFSET]
mov r0, rSELF
ands lr, #THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
blne MterpSuspendCheck @ (self)
mov r2, rINST, lsr #8 @ r2<- AA
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[AA]
ldmia r2, {r0-r1} @ r0/r1 <- vAA/vAA+1
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return_object: /* 0x11 */
/* File: arm/op_return_object.S */
/* File: arm/op_return.S */
/*
* Return a 32-bit value.
*
* for: return, return-object
*/
/* op vAA */
.extern MterpThreadFenceForConstructor
bl MterpThreadFenceForConstructor
ldr lr, [rSELF, #THREAD_FLAGS_OFFSET]
mov r0, rSELF
ands lr, #THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
blne MterpSuspendCheck @ (self)
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG r0, r2 @ r0<- vAA
mov r1, #0
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_const_4: /* 0x12 */
/* File: arm/op_const_4.S */
/* const/4 vA, #+B */
sbfx r1, rINST, #12, #4 @ r1<- sssssssB (sign-extended)
ubfx r0, rINST, #8, #4 @ r0<- A
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
GET_INST_OPCODE ip @ ip<- opcode from rINST
SET_VREG r1, r0 @ fp[A]<- r1
GOTO_OPCODE ip @ execute next instruction
/* ------------------------------ */
.balign 128
.L_op_const_16: /* 0x13 */
/* File: arm/op_const_16.S */
/* const/16 vAA, #+BBBB */
FETCH_S r0, 1 @ r0<- ssssBBBB (sign-extended)
mov r3, rINST, lsr #8 @ r3<- AA
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
SET_VREG r0, r3 @ vAA<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const: /* 0x14 */
/* File: arm/op_const.S */
/* const vAA, #+BBBBbbbb */
mov r3, rINST, lsr #8 @ r3<- AA
FETCH r0, 1 @ r0<- bbbb (low)
FETCH r1, 2 @ r1<- BBBB (high)
FETCH_ADVANCE_INST 3 @ advance rPC, load rINST
orr r0, r0, r1, lsl #16 @ r0<- BBBBbbbb
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r3 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_high16: /* 0x15 */
/* File: arm/op_const_high16.S */
/* const/high16 vAA, #+BBBB0000 */
FETCH r0, 1 @ r0<- 0000BBBB (zero-extended)
mov r3, rINST, lsr #8 @ r3<- AA
mov r0, r0, lsl #16 @ r0<- BBBB0000
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
SET_VREG r0, r3 @ vAA<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide_16: /* 0x16 */
/* File: arm/op_const_wide_16.S */
/* const-wide/16 vAA, #+BBBB */
FETCH_S r0, 1 @ r0<- ssssBBBB (sign-extended)
mov r3, rINST, lsr #8 @ r3<- AA
mov r1, r0, asr #31 @ r1<- ssssssss
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
CLEAR_SHADOW_PAIR r3, r2, lr @ Zero out the shadow regs
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[AA]
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r3, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide_32: /* 0x17 */
/* File: arm/op_const_wide_32.S */
/* const-wide/32 vAA, #+BBBBbbbb */
FETCH r0, 1 @ r0<- 0000bbbb (low)
mov r3, rINST, lsr #8 @ r3<- AA
FETCH_S r2, 2 @ r2<- ssssBBBB (high)
FETCH_ADVANCE_INST 3 @ advance rPC, load rINST
orr r0, r0, r2, lsl #16 @ r0<- BBBBbbbb
CLEAR_SHADOW_PAIR r3, r2, lr @ Zero out the shadow regs
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[AA]
mov r1, r0, asr #31 @ r1<- ssssssss
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r3, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide: /* 0x18 */
/* File: arm/op_const_wide.S */
/* const-wide vAA, #+HHHHhhhhBBBBbbbb */
FETCH r0, 1 @ r0<- bbbb (low)
FETCH r1, 2 @ r1<- BBBB (low middle)
FETCH r2, 3 @ r2<- hhhh (high middle)
orr r0, r0, r1, lsl #16 @ r0<- BBBBbbbb (low word)
FETCH r3, 4 @ r3<- HHHH (high)
mov r9, rINST, lsr #8 @ r9<- AA
orr r1, r2, r3, lsl #16 @ r1<- HHHHhhhh (high word)
CLEAR_SHADOW_PAIR r9, r2, r3 @ Zero out the shadow regs
FETCH_ADVANCE_INST 5 @ advance rPC, load rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[AA]
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide_high16: /* 0x19 */
/* File: arm/op_const_wide_high16.S */
/* const-wide/high16 vAA, #+BBBB000000000000 */
FETCH r1, 1 @ r1<- 0000BBBB (zero-extended)
mov r3, rINST, lsr #8 @ r3<- AA
mov r0, #0 @ r0<- 00000000
mov r1, r1, lsl #16 @ r1<- BBBB0000
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
CLEAR_SHADOW_PAIR r3, r0, r2 @ Zero shadow regs
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[AA]
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r3, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_string: /* 0x1a */
/* File: arm/op_const_string.S */
/* const/string vAA, String@BBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- BBBB
mov r1, rINST, lsr #8 @ r1<- AA
add r2, rFP, #OFF_FP_SHADOWFRAME
mov r3, rSELF
bl MterpConstString @ (index, tgt_reg, shadow_frame, self)
PREFETCH_INST 2 @ load rINST
cmp r0, #0 @ fail?
bne MterpPossibleException @ let reference interpreter deal with it.
ADVANCE 2 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_string_jumbo: /* 0x1b */
/* File: arm/op_const_string_jumbo.S */
/* const/string vAA, String@BBBBBBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- bbbb (low)
FETCH r2, 2 @ r2<- BBBB (high)
mov r1, rINST, lsr #8 @ r1<- AA
orr r0, r0, r2, lsl #16 @ r1<- BBBBbbbb
add r2, rFP, #OFF_FP_SHADOWFRAME
mov r3, rSELF
bl MterpConstString @ (index, tgt_reg, shadow_frame, self)
PREFETCH_INST 3 @ advance rPC
cmp r0, #0 @ fail?
bne MterpPossibleException @ let reference interpreter deal with it.
ADVANCE 3 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_class: /* 0x1c */
/* File: arm/op_const_class.S */
/* const/class vAA, Class@BBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- BBBB
mov r1, rINST, lsr #8 @ r1<- AA
add r2, rFP, #OFF_FP_SHADOWFRAME
mov r3, rSELF
bl MterpConstClass @ (index, tgt_reg, shadow_frame, self)
PREFETCH_INST 2
cmp r0, #0
bne MterpPossibleException
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_monitor_enter: /* 0x1d */
/* File: arm/op_monitor_enter.S */
/*
* Synchronize on an object.
*/
/* monitor-enter vAA */
EXPORT_PC
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG r0, r2 @ r0<- vAA (object)
mov r1, rSELF @ r1<- self
bl artLockObjectFromCode
cmp r0, #0
bne MterpException
FETCH_ADVANCE_INST 1
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_monitor_exit: /* 0x1e */
/* File: arm/op_monitor_exit.S */
/*
* Unlock an object.
*
* Exceptions that occur when unlocking a monitor need to appear as
* if they happened at the following instruction. See the Dalvik
* instruction spec.
*/
/* monitor-exit vAA */
EXPORT_PC
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG r0, r2 @ r0<- vAA (object)
mov r1, rSELF @ r0<- self
bl artUnlockObjectFromCode @ r0<- success for unlock(self, obj)
cmp r0, #0 @ failed?
bne MterpException
FETCH_ADVANCE_INST 1 @ before throw: advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_check_cast: /* 0x1f */
/* File: arm/op_check_cast.S */
/*
* Check to see if a cast from one class to another is allowed.
*/
/* check-cast vAA, class@BBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- BBBB
mov r1, rINST, lsr #8 @ r1<- AA
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &object
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- method
mov r3, rSELF @ r3<- self
bl MterpCheckCast @ (index, &obj, method, self)
PREFETCH_INST 2
cmp r0, #0
bne MterpPossibleException
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_instance_of: /* 0x20 */
/* File: arm/op_instance_of.S */
/*
* Check to see if an object reference is an instance of a class.
*
* Most common situation is a non-null object, being compared against
* an already-resolved class.
*/
/* instance-of vA, vB, class@CCCC */
EXPORT_PC
FETCH r0, 1 @ r0<- CCCC
mov r1, rINST, lsr #12 @ r1<- B
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &object
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- method
mov r3, rSELF @ r3<- self
bl MterpInstanceOf @ (index, &obj, method, self)
ldr r1, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r9, rINST, #8, #4 @ r9<- A
PREFETCH_INST 2
cmp r1, #0 @ exception pending?
bne MterpException
ADVANCE 2 @ advance rPC
SET_VREG r0, r9 @ vA<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_array_length: /* 0x21 */
/* File: arm/op_array_length.S */
/*
* Return the length of an array.
*/
mov r1, rINST, lsr #12 @ r1<- B
ubfx r2, rINST, #8, #4 @ r2<- A
GET_VREG r0, r1 @ r0<- vB (object ref)
cmp r0, #0 @ is object null?
beq common_errNullObject @ yup, fail
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- array length
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r3, r2 @ vB<- length
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_new_instance: /* 0x22 */
/* File: arm/op_new_instance.S */
/*
* Create a new instance of a class.
*/
/* new-instance vAA, class@BBBB */
EXPORT_PC
add r0, rFP, #OFF_FP_SHADOWFRAME
mov r1, rSELF
mov r2, rINST
bl MterpNewInstance @ (shadow_frame, self, inst_data)
cmp r0, #0
beq MterpPossibleException
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_new_array: /* 0x23 */
/* File: arm/op_new_array.S */
/*
* Allocate an array of objects, specified with the array class
* and a count.
*
* The verifier guarantees that this is an array class, so we don't
* check for it here.
*/
/* new-array vA, vB, class@CCCC */
EXPORT_PC
add r0, rFP, #OFF_FP_SHADOWFRAME
mov r1, rPC
mov r2, rINST
mov r3, rSELF
bl MterpNewArray
cmp r0, #0
beq MterpPossibleException
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_filled_new_array: /* 0x24 */
/* File: arm/op_filled_new_array.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type@BBBB */
.extern MterpFilledNewArray
EXPORT_PC
add r0, rFP, #OFF_FP_SHADOWFRAME
mov r1, rPC
mov r2, rSELF
bl MterpFilledNewArray
cmp r0, #0
beq MterpPossibleException
FETCH_ADVANCE_INST 3 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_filled_new_array_range: /* 0x25 */
/* File: arm/op_filled_new_array_range.S */
/* File: arm/op_filled_new_array.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type@BBBB */
.extern MterpFilledNewArrayRange
EXPORT_PC
add r0, rFP, #OFF_FP_SHADOWFRAME
mov r1, rPC
mov r2, rSELF
bl MterpFilledNewArrayRange
cmp r0, #0
beq MterpPossibleException
FETCH_ADVANCE_INST 3 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_fill_array_data: /* 0x26 */
/* File: arm/op_fill_array_data.S */
/* fill-array-data vAA, +BBBBBBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- bbbb (lo)
FETCH r1, 2 @ r1<- BBBB (hi)
mov r3, rINST, lsr #8 @ r3<- AA
orr r1, r0, r1, lsl #16 @ r1<- BBBBbbbb
GET_VREG r0, r3 @ r0<- vAA (array object)
add r1, rPC, r1, lsl #1 @ r1<- PC + BBBBbbbb*2 (array data off.)
bl MterpFillArrayData @ (obj, payload)
cmp r0, #0 @ 0 means an exception is thrown
beq MterpPossibleException @ exception?
FETCH_ADVANCE_INST 3 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_throw: /* 0x27 */
/* File: arm/op_throw.S */
/*
* Throw an exception object in the current thread.
*/
/* throw vAA */
EXPORT_PC
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG r1, r2 @ r1<- vAA (exception object)
cmp r1, #0 @ null object?
beq common_errNullObject @ yes, throw an NPE instead
str r1, [rSELF, #THREAD_EXCEPTION_OFFSET] @ thread->exception<- obj
b MterpException
/* ------------------------------ */
.balign 128
.L_op_goto: /* 0x28 */
/* File: arm/op_goto.S */
/*
* Unconditional branch, 8-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto +AA */
sbfx rINST, rINST, #8, #8 @ rINST<- ssssssAA (sign-extended)
b MterpCommonTakenBranchNoFlags
/* ------------------------------ */
.balign 128
.L_op_goto_16: /* 0x29 */
/* File: arm/op_goto_16.S */
/*
* Unconditional branch, 16-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto/16 +AAAA */
FETCH_S rINST, 1 @ rINST<- ssssAAAA (sign-extended)
b MterpCommonTakenBranchNoFlags
/* ------------------------------ */
.balign 128
.L_op_goto_32: /* 0x2a */
/* File: arm/op_goto_32.S */
/*
* Unconditional branch, 32-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*
* Unlike most opcodes, this one is allowed to branch to itself, so
* our "backward branch" test must be "<=0" instead of "<0". Because
* we need the V bit set, we'll use an adds to convert from Dalvik
* offset to byte offset.
*/
/* goto/32 +AAAAAAAA */
FETCH r0, 1 @ r0<- aaaa (lo)
FETCH r3, 2 @ r1<- AAAA (hi)
orrs rINST, r0, r3, lsl #16 @ rINST<- AAAAaaaa
b MterpCommonTakenBranch
/* ------------------------------ */
.balign 128
.L_op_packed_switch: /* 0x2b */
/* File: arm/op_packed_switch.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
FETCH r0, 1 @ r0<- bbbb (lo)
FETCH r1, 2 @ r1<- BBBB (hi)
mov r3, rINST, lsr #8 @ r3<- AA
orr r0, r0, r1, lsl #16 @ r0<- BBBBbbbb
GET_VREG r1, r3 @ r1<- vAA
add r0, rPC, r0, lsl #1 @ r0<- PC + BBBBbbbb*2
bl MterpDoPackedSwitch @ r0<- code-unit branch offset
movs rINST, r0
b MterpCommonTakenBranch
/* ------------------------------ */
.balign 128
.L_op_sparse_switch: /* 0x2c */
/* File: arm/op_sparse_switch.S */
/* File: arm/op_packed_switch.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
FETCH r0, 1 @ r0<- bbbb (lo)
FETCH r1, 2 @ r1<- BBBB (hi)
mov r3, rINST, lsr #8 @ r3<- AA
orr r0, r0, r1, lsl #16 @ r0<- BBBBbbbb
GET_VREG r1, r3 @ r1<- vAA
add r0, rPC, r0, lsl #1 @ r0<- PC + BBBBbbbb*2
bl MterpDoSparseSwitch @ r0<- code-unit branch offset
movs rINST, r0
b MterpCommonTakenBranch
/* ------------------------------ */
.balign 128
.L_op_cmpl_float: /* 0x2d */
/* File: arm/op_cmpl_float.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x > y) {
* return 1;
* } else if (x < y) {
* return -1;
* } else {
* return -1;
* }
* }
*/
/* op vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
flds s0, [r2] @ s0<- vBB
flds s1, [r3] @ s1<- vCC
vcmpe.f32 s0, s1 @ compare (vBB, vCC)
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mvn r0, #0 @ r0<- -1 (default)
GET_INST_OPCODE ip @ extract opcode from rINST
fmstat @ export status flags
movgt r0, #1 @ (greater than) r1<- 1
moveq r0, #0 @ (equal) r1<- 0
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_cmpg_float: /* 0x2e */
/* File: arm/op_cmpg_float.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x < y) {
* return -1;
* } else if (x > y) {
* return 1;
* } else {
* return 1;
* }
* }
*/
/* op vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
flds s0, [r2] @ s0<- vBB
flds s1, [r3] @ s1<- vCC
vcmpe.f32 s0, s1 @ compare (vBB, vCC)
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mov r0, #1 @ r0<- 1 (default)
GET_INST_OPCODE ip @ extract opcode from rINST
fmstat @ export status flags
mvnmi r0, #0 @ (less than) r1<- -1
moveq r0, #0 @ (equal) r1<- 0
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_cmpl_double: /* 0x2f */
/* File: arm/op_cmpl_double.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x > y) {
* return 1;
* } else if (x < y) {
* return -1;
* } else {
* return -1;
* }
* }
*/
/* op vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
fldd d0, [r2] @ d0<- vBB
fldd d1, [r3] @ d1<- vCC
vcmpe.f64 d0, d1 @ compare (vBB, vCC)
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mvn r0, #0 @ r0<- -1 (default)
GET_INST_OPCODE ip @ extract opcode from rINST
fmstat @ export status flags
movgt r0, #1 @ (greater than) r1<- 1
moveq r0, #0 @ (equal) r1<- 0
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_cmpg_double: /* 0x30 */
/* File: arm/op_cmpg_double.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x < y) {
* return -1;
* } else if (x > y) {
* return 1;
* } else {
* return 1;
* }
* }
*/
/* op vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
fldd d0, [r2] @ d0<- vBB
fldd d1, [r3] @ d1<- vCC
vcmpe.f64 d0, d1 @ compare (vBB, vCC)
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mov r0, #1 @ r0<- 1 (default)
GET_INST_OPCODE ip @ extract opcode from rINST
fmstat @ export status flags
mvnmi r0, #0 @ (less than) r1<- -1
moveq r0, #0 @ (equal) r1<- 0
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_cmp_long: /* 0x31 */
/* File: arm/op_cmp_long.S */
/*
* Compare two 64-bit values. Puts 0, 1, or -1 into the destination
* register based on the results of the comparison.
*/
/* cmp-long vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
cmp r0, r2
sbcs ip, r1, r3 @ Sets correct CCs for checking LT (but not EQ/NE)
mov ip, #0
mvnlt ip, #0 @ -1
cmpeq r0, r2 @ For correct EQ/NE, we may need to repeat the first CMP
orrne ip, #1
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
SET_VREG ip, r9 @ vAA<- ip
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_eq: /* 0x32 */
/* File: arm/op_if_eq.S */
/* File: arm/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG r3, r1 @ r3<- vB
GET_VREG r0, r0 @ r0<- vA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, r3 @ compare (vA, vB)
beq MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_ne: /* 0x33 */
/* File: arm/op_if_ne.S */
/* File: arm/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG r3, r1 @ r3<- vB
GET_VREG r0, r0 @ r0<- vA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, r3 @ compare (vA, vB)
bne MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_lt: /* 0x34 */
/* File: arm/op_if_lt.S */
/* File: arm/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG r3, r1 @ r3<- vB
GET_VREG r0, r0 @ r0<- vA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, r3 @ compare (vA, vB)
blt MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_ge: /* 0x35 */
/* File: arm/op_if_ge.S */
/* File: arm/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG r3, r1 @ r3<- vB
GET_VREG r0, r0 @ r0<- vA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, r3 @ compare (vA, vB)
bge MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_gt: /* 0x36 */
/* File: arm/op_if_gt.S */
/* File: arm/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG r3, r1 @ r3<- vB
GET_VREG r0, r0 @ r0<- vA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, r3 @ compare (vA, vB)
bgt MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_le: /* 0x37 */
/* File: arm/op_if_le.S */
/* File: arm/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG r3, r1 @ r3<- vB
GET_VREG r0, r0 @ r0<- vA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, r3 @ compare (vA, vB)
ble MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_eqz: /* 0x38 */
/* File: arm/op_if_eqz.S */
/* File: arm/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG r0, r0 @ r0<- vAA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, #0 @ compare (vA, 0)
beq MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_nez: /* 0x39 */
/* File: arm/op_if_nez.S */
/* File: arm/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG r0, r0 @ r0<- vAA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, #0 @ compare (vA, 0)
bne MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_ltz: /* 0x3a */
/* File: arm/op_if_ltz.S */
/* File: arm/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG r0, r0 @ r0<- vAA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, #0 @ compare (vA, 0)
blt MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_gez: /* 0x3b */
/* File: arm/op_if_gez.S */
/* File: arm/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG r0, r0 @ r0<- vAA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, #0 @ compare (vA, 0)
bge MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_gtz: /* 0x3c */
/* File: arm/op_if_gtz.S */
/* File: arm/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG r0, r0 @ r0<- vAA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, #0 @ compare (vA, 0)
bgt MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_lez: /* 0x3d */
/* File: arm/op_if_lez.S */
/* File: arm/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "condition"
* fragment that specifies the comparison to perform.
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG r0, r0 @ r0<- vAA
FETCH_S rINST, 1 @ rINST<- branch offset, in code units
cmp r0, #0 @ compare (vA, 0)
ble MterpCommonTakenBranchNoFlags
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_not_taken_osr
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_unused_3e: /* 0x3e */
/* File: arm/op_unused_3e.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_3f: /* 0x3f */
/* File: arm/op_unused_3f.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_40: /* 0x40 */
/* File: arm/op_unused_40.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_41: /* 0x41 */
/* File: arm/op_unused_41.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_42: /* 0x42 */
/* File: arm/op_unused_42.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_43: /* 0x43 */
/* File: arm/op_unused_43.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_aget: /* 0x44 */
/* File: arm/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #2 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
ldr r2, [r0, #MIRROR_INT_ARRAY_DATA_OFFSET] @ r2<- vBB[vCC]
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r2, r9 @ vAA<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_wide: /* 0x45 */
/* File: arm/op_aget_wide.S */
/*
* Array get, 64 bits. vAA <- vBB[vCC].
*
* Arrays of long/double are 64-bit aligned, so it's okay to use LDRD.
*/
/* aget-wide vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
CLEAR_SHADOW_PAIR r9, r2, r3 @ Zero out the shadow regs
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #3 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
ldrd r2, [r0, #MIRROR_WIDE_ARRAY_DATA_OFFSET] @ r2/r3<- vBB[vCC]
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[AA]
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r2-r3} @ vAA/vAA+1<- r2/r3
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_object: /* 0x46 */
/* File: arm/op_aget_object.S */
/*
* Array object get. vAA <- vBB[vCC].
*
* for: aget-object
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
EXPORT_PC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
bl artAGetObjectFromMterp @ (array, index)
ldr r1, [rSELF, #THREAD_EXCEPTION_OFFSET]
PREFETCH_INST 2
cmp r1, #0
bne MterpException
SET_VREG_OBJECT r0, r9
ADVANCE 2
GET_INST_OPCODE ip
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_boolean: /* 0x47 */
/* File: arm/op_aget_boolean.S */
/* File: arm/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #0 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
ldrb r2, [r0, #MIRROR_BOOLEAN_ARRAY_DATA_OFFSET] @ r2<- vBB[vCC]
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r2, r9 @ vAA<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_byte: /* 0x48 */
/* File: arm/op_aget_byte.S */
/* File: arm/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #0 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
ldrsb r2, [r0, #MIRROR_BYTE_ARRAY_DATA_OFFSET] @ r2<- vBB[vCC]
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r2, r9 @ vAA<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_char: /* 0x49 */
/* File: arm/op_aget_char.S */
/* File: arm/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #1 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
ldrh r2, [r0, #MIRROR_CHAR_ARRAY_DATA_OFFSET] @ r2<- vBB[vCC]
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r2, r9 @ vAA<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_short: /* 0x4a */
/* File: arm/op_aget_short.S */
/* File: arm/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #1 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
ldrsh r2, [r0, #MIRROR_SHORT_ARRAY_DATA_OFFSET] @ r2<- vBB[vCC]
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r2, r9 @ vAA<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput: /* 0x4b */
/* File: arm/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #2 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_VREG r2, r9 @ r2<- vAA
GET_INST_OPCODE ip @ extract opcode from rINST
str r2, [r0, #MIRROR_INT_ARRAY_DATA_OFFSET] @ vBB[vCC]<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_wide: /* 0x4c */
/* File: arm/op_aput_wide.S */
/*
* Array put, 64 bits. vBB[vCC] <- vAA.
*
* Arrays of long/double are 64-bit aligned, so it's okay to use STRD.
*/
/* aput-wide vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #3 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[AA]
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
ldmia r9, {r2-r3} @ r2/r3<- vAA/vAA+1
GET_INST_OPCODE ip @ extract opcode from rINST
strd r2, [r0, #MIRROR_WIDE_ARRAY_DATA_OFFSET] @ r2/r3<- vBB[vCC]
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_object: /* 0x4d */
/* File: arm/op_aput_object.S */
/*
* Store an object into an array. vBB[vCC] <- vAA.
*/
/* op vAA, vBB, vCC */
EXPORT_PC
add r0, rFP, #OFF_FP_SHADOWFRAME
mov r1, rPC
mov r2, rINST
bl MterpAputObject
cmp r0, #0
beq MterpPossibleException
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_boolean: /* 0x4e */
/* File: arm/op_aput_boolean.S */
/* File: arm/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #0 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_VREG r2, r9 @ r2<- vAA
GET_INST_OPCODE ip @ extract opcode from rINST
strb r2, [r0, #MIRROR_BOOLEAN_ARRAY_DATA_OFFSET] @ vBB[vCC]<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_byte: /* 0x4f */
/* File: arm/op_aput_byte.S */
/* File: arm/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #0 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_VREG r2, r9 @ r2<- vAA
GET_INST_OPCODE ip @ extract opcode from rINST
strb r2, [r0, #MIRROR_BYTE_ARRAY_DATA_OFFSET] @ vBB[vCC]<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_char: /* 0x50 */
/* File: arm/op_aput_char.S */
/* File: arm/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #1 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_VREG r2, r9 @ r2<- vAA
GET_INST_OPCODE ip @ extract opcode from rINST
strh r2, [r0, #MIRROR_CHAR_ARRAY_DATA_OFFSET] @ vBB[vCC]<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_short: /* 0x51 */
/* File: arm/op_aput_short.S */
/* File: arm/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B r2, 1, 0 @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B r3, 1, 1 @ r3<- CC
GET_VREG r0, r2 @ r0<- vBB (array object)
GET_VREG r1, r3 @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #MIRROR_ARRAY_LENGTH_OFFSET] @ r3<- arrayObj->length
add r0, r0, r1, lsl #1 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_VREG r2, r9 @ r2<- vAA
GET_INST_OPCODE ip @ extract opcode from rINST
strh r2, [r0, #MIRROR_SHORT_ARRAY_DATA_OFFSET] @ vBB[vCC]<- r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget: /* 0x52 */
/* File: arm/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- referrer
mov r3, rSELF @ r3<- self
bl artGet32InstanceFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r2, rINST, #8, #4 @ r2<- A
PREFETCH_INST 2
cmp r3, #0
bne MterpPossibleException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[A]<- r0
.else
SET_VREG r0, r2 @ fp[A]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_wide: /* 0x53 */
/* File: arm/op_iget_wide.S */
/*
* 64-bit instance field get.
*
* for: iget-wide
*/
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- referrer
mov r3, rSELF @ r3<- self
bl artGet64InstanceFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r2, rINST, #8, #4 @ r2<- A
PREFETCH_INST 2
cmp r3, #0
bne MterpException @ bail out
CLEAR_SHADOW_PAIR r2, ip, lr @ Zero out the shadow regs
VREG_INDEX_TO_ADDR r3, r2 @ r3<- &fp[A]
stmia r3, {r0-r1} @ fp[A]<- r0/r1
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_object: /* 0x54 */
/* File: arm/op_iget_object.S */
/* File: arm/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- referrer
mov r3, rSELF @ r3<- self
bl artGetObjInstanceFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r2, rINST, #8, #4 @ r2<- A
PREFETCH_INST 2
cmp r3, #0
bne MterpPossibleException @ bail out
.if 1
SET_VREG_OBJECT r0, r2 @ fp[A]<- r0
.else
SET_VREG r0, r2 @ fp[A]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_boolean: /* 0x55 */
/* File: arm/op_iget_boolean.S */
/* File: arm/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- referrer
mov r3, rSELF @ r3<- self
bl artGetBooleanInstanceFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r2, rINST, #8, #4 @ r2<- A
PREFETCH_INST 2
cmp r3, #0
bne MterpPossibleException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[A]<- r0
.else
SET_VREG r0, r2 @ fp[A]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_byte: /* 0x56 */
/* File: arm/op_iget_byte.S */
/* File: arm/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- referrer
mov r3, rSELF @ r3<- self
bl artGetByteInstanceFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r2, rINST, #8, #4 @ r2<- A
PREFETCH_INST 2
cmp r3, #0
bne MterpPossibleException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[A]<- r0
.else
SET_VREG r0, r2 @ fp[A]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_char: /* 0x57 */
/* File: arm/op_iget_char.S */
/* File: arm/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- referrer
mov r3, rSELF @ r3<- self
bl artGetCharInstanceFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r2, rINST, #8, #4 @ r2<- A
PREFETCH_INST 2
cmp r3, #0
bne MterpPossibleException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[A]<- r0
.else
SET_VREG r0, r2 @ fp[A]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_short: /* 0x58 */
/* File: arm/op_iget_short.S */
/* File: arm/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ldr r2, [rFP, #OFF_FP_METHOD] @ r2<- referrer
mov r3, rSELF @ r3<- self
bl artGetShortInstanceFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r2, rINST, #8, #4 @ r2<- A
PREFETCH_INST 2
cmp r3, #0
bne MterpPossibleException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[A]<- r0
.else
SET_VREG r0, r2 @ fp[A]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput: /* 0x59 */
/* File: arm/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet32InstanceFromMterp
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
GET_VREG r2, r2 @ r2<- fp[A]
ldr r3, [rFP, #OFF_FP_METHOD] @ r3<- referrer
PREFETCH_INST 2
bl artSet32InstanceFromMterp
cmp r0, #0
bne MterpPossibleException
ADVANCE 2 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_wide: /* 0x5a */
/* File: arm/op_iput_wide.S */
/* iput-wide vA, vB, field@CCCC */
.extern artSet64InstanceFromMterp
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[A]
ldr r3, [rFP, #OFF_FP_METHOD] @ r3<- referrer
PREFETCH_INST 2
bl artSet64InstanceFromMterp
cmp r0, #0
bne MterpPossibleException
ADVANCE 2 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_object: /* 0x5b */
/* File: arm/op_iput_object.S */
EXPORT_PC
add r0, rFP, #OFF_FP_SHADOWFRAME
mov r1, rPC
mov r2, rINST
mov r3, rSELF
bl MterpIputObject
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_boolean: /* 0x5c */
/* File: arm/op_iput_boolean.S */
/* File: arm/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet8InstanceFromMterp
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
GET_VREG r2, r2 @ r2<- fp[A]
ldr r3, [rFP, #OFF_FP_METHOD] @ r3<- referrer
PREFETCH_INST 2
bl artSet8InstanceFromMterp
cmp r0, #0
bne MterpPossibleException
ADVANCE 2 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_byte: /* 0x5d */
/* File: arm/op_iput_byte.S */
/* File: arm/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet8InstanceFromMterp
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
GET_VREG r2, r2 @ r2<- fp[A]
ldr r3, [rFP, #OFF_FP_METHOD] @ r3<- referrer
PREFETCH_INST 2
bl artSet8InstanceFromMterp
cmp r0, #0
bne MterpPossibleException
ADVANCE 2 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_char: /* 0x5e */
/* File: arm/op_iput_char.S */
/* File: arm/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet16InstanceFromMterp
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
GET_VREG r2, r2 @ r2<- fp[A]
ldr r3, [rFP, #OFF_FP_METHOD] @ r3<- referrer
PREFETCH_INST 2
bl artSet16InstanceFromMterp
cmp r0, #0
bne MterpPossibleException
ADVANCE 2 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_short: /* 0x5f */
/* File: arm/op_iput_short.S */
/* File: arm/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet16InstanceFromMterp
EXPORT_PC
FETCH r0, 1 @ r0<- field ref CCCC
mov r1, rINST, lsr #12 @ r1<- B
GET_VREG r1, r1 @ r1<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
GET_VREG r2, r2 @ r2<- fp[A]
ldr r3, [rFP, #OFF_FP_METHOD] @ r3<- referrer
PREFETCH_INST 2
bl artSet16InstanceFromMterp
cmp r0, #0
bne MterpPossibleException
ADVANCE 2 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget: /* 0x60 */
/* File: arm/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
.extern artGet32StaticFromCode
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
ldr r1, [rFP, #OFF_FP_METHOD]
mov r2, rSELF
bl artGet32StaticFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
mov r2, rINST, lsr #8 @ r2<- AA
PREFETCH_INST 2
cmp r3, #0 @ Fail to resolve?
bne MterpException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[AA]<- r0
.else
SET_VREG r0, r2 @ fp[AA]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_sget_wide: /* 0x61 */
/* File: arm/op_sget_wide.S */
/*
* SGET_WIDE handler wrapper.
*
*/
/* sget-wide vAA, field@BBBB */
.extern artGet64StaticFromCode
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
ldr r1, [rFP, #OFF_FP_METHOD]
mov r2, rSELF
bl artGet64StaticFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
mov r9, rINST, lsr #8 @ r9<- AA
VREG_INDEX_TO_ADDR lr, r9 @ r9<- &fp[AA]
cmp r3, #0 @ Fail to resolve?
bne MterpException @ bail out
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
CLEAR_SHADOW_PAIR r9, r2, ip @ Zero out the shadow regs
stmia lr, {r0-r1} @ vAA/vAA+1<- r0/r1
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget_object: /* 0x62 */
/* File: arm/op_sget_object.S */
/* File: arm/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
.extern artGetObjStaticFromCode
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
ldr r1, [rFP, #OFF_FP_METHOD]
mov r2, rSELF
bl artGetObjStaticFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
mov r2, rINST, lsr #8 @ r2<- AA
PREFETCH_INST 2
cmp r3, #0 @ Fail to resolve?
bne MterpException @ bail out
.if 1
SET_VREG_OBJECT r0, r2 @ fp[AA]<- r0
.else
SET_VREG r0, r2 @ fp[AA]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_sget_boolean: /* 0x63 */
/* File: arm/op_sget_boolean.S */
/* File: arm/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
.extern artGetBooleanStaticFromCode
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
ldr r1, [rFP, #OFF_FP_METHOD]
mov r2, rSELF
bl artGetBooleanStaticFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
mov r2, rINST, lsr #8 @ r2<- AA
PREFETCH_INST 2
cmp r3, #0 @ Fail to resolve?
bne MterpException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[AA]<- r0
.else
SET_VREG r0, r2 @ fp[AA]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_sget_byte: /* 0x64 */
/* File: arm/op_sget_byte.S */
/* File: arm/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
.extern artGetByteStaticFromCode
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
ldr r1, [rFP, #OFF_FP_METHOD]
mov r2, rSELF
bl artGetByteStaticFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
mov r2, rINST, lsr #8 @ r2<- AA
PREFETCH_INST 2
cmp r3, #0 @ Fail to resolve?
bne MterpException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[AA]<- r0
.else
SET_VREG r0, r2 @ fp[AA]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_sget_char: /* 0x65 */
/* File: arm/op_sget_char.S */
/* File: arm/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
.extern artGetCharStaticFromCode
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
ldr r1, [rFP, #OFF_FP_METHOD]
mov r2, rSELF
bl artGetCharStaticFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
mov r2, rINST, lsr #8 @ r2<- AA
PREFETCH_INST 2
cmp r3, #0 @ Fail to resolve?
bne MterpException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[AA]<- r0
.else
SET_VREG r0, r2 @ fp[AA]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_sget_short: /* 0x66 */
/* File: arm/op_sget_short.S */
/* File: arm/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
.extern artGetShortStaticFromCode
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
ldr r1, [rFP, #OFF_FP_METHOD]
mov r2, rSELF
bl artGetShortStaticFromCode
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
mov r2, rINST, lsr #8 @ r2<- AA
PREFETCH_INST 2
cmp r3, #0 @ Fail to resolve?
bne MterpException @ bail out
.if 0
SET_VREG_OBJECT r0, r2 @ fp[AA]<- r0
.else
SET_VREG r0, r2 @ fp[AA]<- r0
.endif
ADVANCE 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_sput: /* 0x67 */
/* File: arm/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
mov r3, rINST, lsr #8 @ r3<- AA
GET_VREG r1, r3 @ r1<= fp[AA]
ldr r2, [rFP, #OFF_FP_METHOD]
mov r3, rSELF
PREFETCH_INST 2 @ Get next inst, but don't advance rPC
bl artSet32StaticFromCode
cmp r0, #0 @ 0 on success, -1 on failure
bne MterpException
ADVANCE 2 @ Past exception point - now advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_wide: /* 0x68 */
/* File: arm/op_sput_wide.S */
/*
* SPUT_WIDE handler wrapper.
*
*/
/* sput-wide vAA, field@BBBB */
.extern artSet64IndirectStaticFromMterp
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
ldr r1, [rFP, #OFF_FP_METHOD]
mov r2, rINST, lsr #8 @ r3<- AA
VREG_INDEX_TO_ADDR r2, r2
mov r3, rSELF
PREFETCH_INST 2 @ Get next inst, but don't advance rPC
bl artSet64IndirectStaticFromMterp
cmp r0, #0 @ 0 on success, -1 on failure
bne MterpException
ADVANCE 2 @ Past exception point - now advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_object: /* 0x69 */
/* File: arm/op_sput_object.S */
EXPORT_PC
add r0, rFP, #OFF_FP_SHADOWFRAME
mov r1, rPC
mov r2, rINST
mov r3, rSELF
bl MterpSputObject
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_boolean: /* 0x6a */
/* File: arm/op_sput_boolean.S */
/* File: arm/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
mov r3, rINST, lsr #8 @ r3<- AA
GET_VREG r1, r3 @ r1<= fp[AA]
ldr r2, [rFP, #OFF_FP_METHOD]
mov r3, rSELF
PREFETCH_INST 2 @ Get next inst, but don't advance rPC
bl artSet8StaticFromCode
cmp r0, #0 @ 0 on success, -1 on failure
bne MterpException
ADVANCE 2 @ Past exception point - now advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_byte: /* 0x6b */
/* File: arm/op_sput_byte.S */
/* File: arm/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
mov r3, rINST, lsr #8 @ r3<- AA
GET_VREG r1, r3 @ r1<= fp[AA]
ldr r2, [rFP, #OFF_FP_METHOD]
mov r3, rSELF
PREFETCH_INST 2 @ Get next inst, but don't advance rPC
bl artSet8StaticFromCode
cmp r0, #0 @ 0 on success, -1 on failure
bne MterpException
ADVANCE 2 @ Past exception point - now advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_char: /* 0x6c */
/* File: arm/op_sput_char.S */
/* File: arm/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
mov r3, rINST, lsr #8 @ r3<- AA
GET_VREG r1, r3 @ r1<= fp[AA]
ldr r2, [rFP, #OFF_FP_METHOD]
mov r3, rSELF
PREFETCH_INST 2 @ Get next inst, but don't advance rPC
bl artSet16StaticFromCode
cmp r0, #0 @ 0 on success, -1 on failure
bne MterpException
ADVANCE 2 @ Past exception point - now advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_short: /* 0x6d */
/* File: arm/op_sput_short.S */
/* File: arm/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
EXPORT_PC
FETCH r0, 1 @ r0<- field ref BBBB
mov r3, rINST, lsr #8 @ r3<- AA
GET_VREG r1, r3 @ r1<= fp[AA]
ldr r2, [rFP, #OFF_FP_METHOD]
mov r3, rSELF
PREFETCH_INST 2 @ Get next inst, but don't advance rPC
bl artSet16StaticFromCode
cmp r0, #0 @ 0 on success, -1 on failure
bne MterpException
ADVANCE 2 @ Past exception point - now advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual: /* 0x6e */
/* File: arm/op_invoke_virtual.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtual
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeVirtual
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/*
* Handle a virtual method call.
*
* for: invoke-virtual, invoke-virtual/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_invoke_super: /* 0x6f */
/* File: arm/op_invoke_super.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeSuper
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeSuper
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/*
* Handle a "super" method call.
*
* for: invoke-super, invoke-super/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_invoke_direct: /* 0x70 */
/* File: arm/op_invoke_direct.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeDirect
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeDirect
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_invoke_static: /* 0x71 */
/* File: arm/op_invoke_static.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeStatic
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeStatic
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_invoke_interface: /* 0x72 */
/* File: arm/op_invoke_interface.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeInterface
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeInterface
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/*
* Handle an interface method call.
*
* for: invoke-interface, invoke-interface/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_return_void_no_barrier: /* 0x73 */
/* File: arm/op_return_void_no_barrier.S */
ldr lr, [rSELF, #THREAD_FLAGS_OFFSET]
mov r0, rSELF
ands lr, #THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
blne MterpSuspendCheck @ (self)
mov r0, #0
mov r1, #0
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_range: /* 0x74 */
/* File: arm/op_invoke_virtual_range.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualRange
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeVirtualRange
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_invoke_super_range: /* 0x75 */
/* File: arm/op_invoke_super_range.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeSuperRange
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeSuperRange
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_invoke_direct_range: /* 0x76 */
/* File: arm/op_invoke_direct_range.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeDirectRange
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeDirectRange
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_invoke_static_range: /* 0x77 */
/* File: arm/op_invoke_static_range.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeStaticRange
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeStaticRange
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_invoke_interface_range: /* 0x78 */
/* File: arm/op_invoke_interface_range.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeInterfaceRange
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeInterfaceRange
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_unused_79: /* 0x79 */
/* File: arm/op_unused_79.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_7a: /* 0x7a */
/* File: arm/op_unused_7a.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_neg_int: /* 0x7b */
/* File: arm/op_neg_int.S */
/* File: arm/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r3 @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
rsb r0, r0, #0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 128
.L_op_not_int: /* 0x7c */
/* File: arm/op_not_int.S */
/* File: arm/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r3 @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
mvn r0, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 128
.L_op_neg_long: /* 0x7d */
/* File: arm/op_neg_long.S */
/* File: arm/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
rsbs r0, r0, #0 @ optional op; may set condition codes
rsc r1, r1, #0 @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 128
.L_op_not_long: /* 0x7e */
/* File: arm/op_not_long.S */
/* File: arm/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
mvn r0, r0 @ optional op; may set condition codes
mvn r1, r1 @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 128
.L_op_neg_float: /* 0x7f */
/* File: arm/op_neg_float.S */
/* File: arm/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r3 @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
add r0, r0, #0x80000000 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 128
.L_op_neg_double: /* 0x80 */
/* File: arm/op_neg_double.S */
/* File: arm/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
add r1, r1, #0x80000000 @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 128
.L_op_int_to_long: /* 0x81 */
/* File: arm/op_int_to_long.S */
/* File: arm/unopWider.S */
/*
* Generic 32bit-to-64bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op r0", where
* "result" is a 64-bit quantity in r0/r1.
*
* For: int-to-long, int-to-double, float-to-long, float-to-double
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
GET_VREG r0, r3 @ r0<- vB
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
@ optional op; may set condition codes
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
mov r1, r0, asr #31 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vA/vA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_int_to_float: /* 0x82 */
/* File: arm/op_int_to_float.S */
/* File: arm/funop.S */
/*
* Generic 32-bit unary floating-point operation. Provide an "instr"
* line that specifies an instruction that performs "s1 = op s0".
*
* for: int-to-float, float-to-int
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
flds s0, [r3] @ s0<- vB
ubfx r9, rINST, #8, #4 @ r9<- A
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
fsitos s1, s0 @ s1<- op
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
fsts s1, [r9] @ vA<- s1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_double: /* 0x83 */
/* File: arm/op_int_to_double.S */
/* File: arm/funopWider.S */
/*
* Generic 32bit-to-64bit floating point unary operation. Provide an
* "instr" line that specifies an instruction that performs "d0 = op s0".
*
* For: int-to-double, float-to-double
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
flds s0, [r3] @ s0<- vB
ubfx r9, rINST, #8, #4 @ r9<- A
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
fsitod d0, s0 @ d0<- op
CLEAR_SHADOW_PAIR r9, ip, lr @ Zero shadow regs
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
fstd d0, [r9] @ vA<- d0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_long_to_int: /* 0x84 */
/* File: arm/op_long_to_int.S */
/* we ignore the high word, making this equivalent to a 32-bit reg move */
/* File: arm/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
mov r1, rINST, lsr #12 @ r1<- B from 15:12
ubfx r0, rINST, #8, #4 @ r0<- A from 11:8
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
GET_VREG r2, r1 @ r2<- fp[B]
GET_INST_OPCODE ip @ ip<- opcode from rINST
.if 0
SET_VREG_OBJECT r2, r0 @ fp[A]<- r2
.else
SET_VREG r2, r0 @ fp[A]<- r2
.endif
GOTO_OPCODE ip @ execute next instruction
/* ------------------------------ */
.balign 128
.L_op_long_to_float: /* 0x85 */
/* File: arm/op_long_to_float.S */
/* File: arm/unopNarrower.S */
/*
* Generic 64bit-to-32bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op r0/r1", where
* "result" is a 32-bit quantity in r0.
*
* For: long-to-float, double-to-int, double-to-float
*
* (This would work for long-to-int, but that instruction is actually
* an exact match for op_move.)
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[B]
ldmia r3, {r0-r1} @ r0/r1<- vB/vB+1
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_l2f @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_long_to_double: /* 0x86 */
/* File: arm/op_long_to_double.S */
/*
* Specialised 64-bit floating point operation.
*
* Note: The result will be returned in d2.
*
* For: long-to-double
*/
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[B]
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[A]
vldr d0, [r3] @ d0<- vAA
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
vcvt.f64.s32 d1, s1 @ d1<- (double)(vAAh)
vcvt.f64.u32 d2, s0 @ d2<- (double)(vAAl)
vldr d3, constvalop_long_to_double
vmla.f64 d2, d1, d3 @ d2<- vAAh*2^32 + vAAl
GET_INST_OPCODE ip @ extract opcode from rINST
vstr.64 d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* literal pool helper */
constvalop_long_to_double:
.8byte 0x41f0000000000000
/* ------------------------------ */
.balign 128
.L_op_float_to_int: /* 0x87 */
/* File: arm/op_float_to_int.S */
/* File: arm/funop.S */
/*
* Generic 32-bit unary floating-point operation. Provide an "instr"
* line that specifies an instruction that performs "s1 = op s0".
*
* for: int-to-float, float-to-int
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
flds s0, [r3] @ s0<- vB
ubfx r9, rINST, #8, #4 @ r9<- A
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
ftosizs s1, s0 @ s1<- op
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
fsts s1, [r9] @ vA<- s1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_float_to_long: /* 0x88 */
/* File: arm/op_float_to_long.S */
/* File: arm/unopWider.S */
/*
* Generic 32bit-to-64bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op r0", where
* "result" is a 64-bit quantity in r0/r1.
*
* For: int-to-long, int-to-double, float-to-long, float-to-double
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
GET_VREG r0, r3 @ r0<- vB
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
@ optional op; may set condition codes
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
bl f2l_doconv @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vA/vA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_float_to_double: /* 0x89 */
/* File: arm/op_float_to_double.S */
/* File: arm/funopWider.S */
/*
* Generic 32bit-to-64bit floating point unary operation. Provide an
* "instr" line that specifies an instruction that performs "d0 = op s0".
*
* For: int-to-double, float-to-double
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
flds s0, [r3] @ s0<- vB
ubfx r9, rINST, #8, #4 @ r9<- A
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
vcvt.f64.f32 d0, s0 @ d0<- op
CLEAR_SHADOW_PAIR r9, ip, lr @ Zero shadow regs
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
fstd d0, [r9] @ vA<- d0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_double_to_int: /* 0x8a */
/* File: arm/op_double_to_int.S */
/* File: arm/funopNarrower.S */
/*
* Generic 64bit-to-32bit unary floating point operation. Provide an
* "instr" line that specifies an instruction that performs "s0 = op d0".
*
* For: double-to-int, double-to-float
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
fldd d0, [r3] @ d0<- vB
ubfx r9, rINST, #8, #4 @ r9<- A
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
ftosizd s0, d0 @ s0<- op
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
fsts s0, [r9] @ vA<- s0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_double_to_long: /* 0x8b */
/* File: arm/op_double_to_long.S */
/* File: arm/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
bl d2l_doconv @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 128
.L_op_double_to_float: /* 0x8c */
/* File: arm/op_double_to_float.S */
/* File: arm/funopNarrower.S */
/*
* Generic 64bit-to-32bit unary floating point operation. Provide an
* "instr" line that specifies an instruction that performs "s0 = op d0".
*
* For: double-to-int, double-to-float
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
fldd d0, [r3] @ d0<- vB
ubfx r9, rINST, #8, #4 @ r9<- A
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
vcvt.f32.f64 s0, d0 @ s0<- op
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
fsts s0, [r9] @ vA<- s0
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_byte: /* 0x8d */
/* File: arm/op_int_to_byte.S */
/* File: arm/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r3 @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
sxtb r0, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 128
.L_op_int_to_char: /* 0x8e */
/* File: arm/op_int_to_char.S */
/* File: arm/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r3 @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
uxth r0, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 128
.L_op_int_to_short: /* 0x8f */
/* File: arm/op_int_to_short.S */
/* File: arm/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r3 @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
sxth r0, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_int: /* 0x90 */
/* File: arm/op_add_int.S */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
add r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_sub_int: /* 0x91 */
/* File: arm/op_sub_int.S */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
sub r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_int: /* 0x92 */
/* File: arm/op_mul_int.S */
/* must be "mul r0, r1, r0" -- "r0, r0, r1" is illegal */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
mul r0, r1, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_div_int: /* 0x93 */
/* File: arm/op_div_int.S */
/*
* Specialized 32-bit binary operation
*
* Performs "r0 = r0 div r1". The selection between sdiv or the gcc helper
* depends on the compile time value of __ARM_ARCH_EXT_IDIV__ (defined for
* ARMv7 CPUs that have hardware division support).
*
* div-int
*
*/
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
#ifdef __ARM_ARCH_EXT_IDIV__
sdiv r0, r0, r1 @ r0<- op
#else
bl __aeabi_idiv @ r0<- op, r0-r3 changed
#endif
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_rem_int: /* 0x94 */
/* File: arm/op_rem_int.S */
/*
* Specialized 32-bit binary operation
*
* Performs "r1 = r0 rem r1". The selection between sdiv block or the gcc helper
* depends on the compile time value of __ARM_ARCH_EXT_IDIV__ (defined for
* ARMv7 CPUs that have hardware division support).
*
* NOTE: idivmod returns quotient in r0 and remainder in r1
*
* rem-int
*
*/
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
#ifdef __ARM_ARCH_EXT_IDIV__
sdiv r2, r0, r1
mls r1, r1, r2, r0 @ r1<- op, r0-r2 changed
#else
bl __aeabi_idivmod @ r1<- op, r0-r3 changed
#endif
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r1, r9 @ vAA<- r1
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_and_int: /* 0x95 */
/* File: arm/op_and_int.S */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
and r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_int: /* 0x96 */
/* File: arm/op_or_int.S */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
orr r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_int: /* 0x97 */
/* File: arm/op_xor_int.S */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
eor r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_int: /* 0x98 */
/* File: arm/op_shl_int.S */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asl r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_shr_int: /* 0x99 */
/* File: arm/op_shr_int.S */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_ushr_int: /* 0x9a */
/* File: arm/op_ushr_int.S */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, lsr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_long: /* 0x9b */
/* File: arm/op_add_long.S */
/* File: arm/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov rINST, rINST, lsr #8 @ rINST<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[AA]
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, lr, ip @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
adds r0, r0, r2 @ optional op; may set condition codes
adc r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_sub_long: /* 0x9c */
/* File: arm/op_sub_long.S */
/* File: arm/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov rINST, rINST, lsr #8 @ rINST<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[AA]
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, lr, ip @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
subs r0, r0, r2 @ optional op; may set condition codes
sbc r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_long: /* 0x9d */
/* File: arm/op_mul_long.S */
/*
* Signed 64-bit integer multiply.
*
* Consider WXxYZ (r1r0 x r3r2) with a long multiply:
* WX
* x YZ
* --------
* ZW ZX
* YW YX
*
* The low word of the result holds ZX, the high word holds
* (ZW+YX) + (the high overflow from ZX). YW doesn't matter because
* it doesn't fit in the low 64 bits.
*
* Unlike most ARM math operations, multiply instructions have
* restrictions on using the same register more than once (Rd and Rm
* cannot be the same).
*/
/* mul-long vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
mul ip, r2, r1 @ ip<- ZxW
umull r1, lr, r2, r0 @ r1/lr <- ZxX
mla r2, r0, r3, ip @ r2<- YxX + (ZxW)
mov r0, rINST, lsr #8 @ r0<- AA
add r2, r2, lr @ r2<- lr + low(ZxW + (YxX))
VREG_INDEX_TO_ADDR r0, r0 @ r0<- &fp[AA]
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r0, {r1-r2 } @ vAA/vAA+1<- r1/r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_long: /* 0x9e */
/* File: arm/op_div_long.S */
/* File: arm/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov rINST, rINST, lsr #8 @ rINST<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[AA]
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 1
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, lr, ip @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_ldivmod @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_rem_long: /* 0x9f */
/* File: arm/op_rem_long.S */
/* ldivmod returns quotient in r0/r1 and remainder in r2/r3 */
/* File: arm/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov rINST, rINST, lsr #8 @ rINST<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[AA]
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 1
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, lr, ip @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_ldivmod @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r2,r3} @ vAA/vAA+1<- r2/r3
GOTO_OPCODE ip @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_and_long: /* 0xa0 */
/* File: arm/op_and_long.S */
/* File: arm/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov rINST, rINST, lsr #8 @ rINST<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[AA]
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, lr, ip @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
and r0, r0, r2 @ optional op; may set condition codes
and r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_long: /* 0xa1 */
/* File: arm/op_or_long.S */
/* File: arm/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov rINST, rINST, lsr #8 @ rINST<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[AA]
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, lr, ip @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
orr r0, r0, r2 @ optional op; may set condition codes
orr r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_long: /* 0xa2 */
/* File: arm/op_xor_long.S */
/* File: arm/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov rINST, rINST, lsr #8 @ rINST<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[AA]
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, lr, ip @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
eor r0, r0, r2 @ optional op; may set condition codes
eor r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_long: /* 0xa3 */
/* File: arm/op_shl_long.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* shl-long vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r3, r0, #255 @ r3<- BB
mov r0, r0, lsr #8 @ r0<- CC
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[BB]
GET_VREG r2, r0 @ r2<- vCC
ldmia r3, {r0-r1} @ r0/r1<- vBB/vBB+1
CLEAR_SHADOW_PAIR r9, lr, ip @ Zero out the shadow regs
and r2, r2, #63 @ r2<- r2 & 0x3f
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[AA]
mov r1, r1, asl r2 @ r1<- r1 << r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r1, r1, r0, lsr r3 @ r1<- r1 | (r0 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
movpl r1, r0, asl ip @ if r2 >= 32, r1<- r0 << (r2-32)
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mov r0, r0, asl r2 @ r0<- r0 << r2
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shr_long: /* 0xa4 */
/* File: arm/op_shr_long.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* shr-long vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r3, r0, #255 @ r3<- BB
mov r0, r0, lsr #8 @ r0<- CC
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[BB]
GET_VREG r2, r0 @ r2<- vCC
ldmia r3, {r0-r1} @ r0/r1<- vBB/vBB+1
CLEAR_SHADOW_PAIR r9, lr, ip @ Zero out the shadow regs
and r2, r2, #63 @ r0<- r0 & 0x3f
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[AA]
mov r0, r0, lsr r2 @ r0<- r2 >> r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
movpl r0, r1, asr ip @ if r2 >= 32, r0<-r1 >> (r2-32)
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mov r1, r1, asr r2 @ r1<- r1 >> r2
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_ushr_long: /* 0xa5 */
/* File: arm/op_ushr_long.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* ushr-long vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r3, r0, #255 @ r3<- BB
mov r0, r0, lsr #8 @ r0<- CC
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[BB]
GET_VREG r2, r0 @ r2<- vCC
ldmia r3, {r0-r1} @ r0/r1<- vBB/vBB+1
CLEAR_SHADOW_PAIR r9, lr, ip @ Zero out the shadow regs
and r2, r2, #63 @ r0<- r0 & 0x3f
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[AA]
mov r0, r0, lsr r2 @ r0<- r2 >> r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
movpl r0, r1, lsr ip @ if r2 >= 32, r0<-r1 >>> (r2-32)
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mov r1, r1, lsr r2 @ r1<- r1 >>> r2
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_float: /* 0xa6 */
/* File: arm/op_add_float.S */
/* File: arm/fbinop.S */
/*
* Generic 32-bit floating-point operation. Provide an "instr" line that
* specifies an instruction that performs "s2 = s0 op s1". Because we
* use the "softfp" ABI, this must be an instruction, not a function call.
*
* For: add-float, sub-float, mul-float, div-float
*/
/* floatop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
flds s1, [r3] @ s1<- vCC
flds s0, [r2] @ s0<- vBB
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
fadds s2, s0, s1 @ s2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vAA
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_float: /* 0xa7 */
/* File: arm/op_sub_float.S */
/* File: arm/fbinop.S */
/*
* Generic 32-bit floating-point operation. Provide an "instr" line that
* specifies an instruction that performs "s2 = s0 op s1". Because we
* use the "softfp" ABI, this must be an instruction, not a function call.
*
* For: add-float, sub-float, mul-float, div-float
*/
/* floatop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
flds s1, [r3] @ s1<- vCC
flds s0, [r2] @ s0<- vBB
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
fsubs s2, s0, s1 @ s2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vAA
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_float: /* 0xa8 */
/* File: arm/op_mul_float.S */
/* File: arm/fbinop.S */
/*
* Generic 32-bit floating-point operation. Provide an "instr" line that
* specifies an instruction that performs "s2 = s0 op s1". Because we
* use the "softfp" ABI, this must be an instruction, not a function call.
*
* For: add-float, sub-float, mul-float, div-float
*/
/* floatop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
flds s1, [r3] @ s1<- vCC
flds s0, [r2] @ s0<- vBB
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
fmuls s2, s0, s1 @ s2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vAA
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_float: /* 0xa9 */
/* File: arm/op_div_float.S */
/* File: arm/fbinop.S */
/*
* Generic 32-bit floating-point operation. Provide an "instr" line that
* specifies an instruction that performs "s2 = s0 op s1". Because we
* use the "softfp" ABI, this must be an instruction, not a function call.
*
* For: add-float, sub-float, mul-float, div-float
*/
/* floatop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
flds s1, [r3] @ s1<- vCC
flds s0, [r2] @ s0<- vBB
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
fdivs s2, s0, s1 @ s2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vAA
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_float: /* 0xaa */
/* File: arm/op_rem_float.S */
/* EABI doesn't define a float remainder function, but libm does */
/* File: arm/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG r1, r3 @ r1<- vCC
GET_VREG r0, r2 @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
bl fmodf @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_double: /* 0xab */
/* File: arm/op_add_double.S */
/* File: arm/fbinopWide.S */
/*
* Generic 64-bit double-precision floating point binary operation.
* Provide an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* for: add-double, sub-double, mul-double, div-double
*/
/* doubleop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
fldd d1, [r3] @ d1<- vCC
fldd d0, [r2] @ d0<- vBB
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
faddd d2, d0, d1 @ s2<- op
CLEAR_SHADOW_PAIR r9, ip, lr @ Zero shadow regs
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vAA
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_double: /* 0xac */
/* File: arm/op_sub_double.S */
/* File: arm/fbinopWide.S */
/*
* Generic 64-bit double-precision floating point binary operation.
* Provide an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* for: add-double, sub-double, mul-double, div-double
*/
/* doubleop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
fldd d1, [r3] @ d1<- vCC
fldd d0, [r2] @ d0<- vBB
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
fsubd d2, d0, d1 @ s2<- op
CLEAR_SHADOW_PAIR r9, ip, lr @ Zero shadow regs
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vAA
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_double: /* 0xad */
/* File: arm/op_mul_double.S */
/* File: arm/fbinopWide.S */
/*
* Generic 64-bit double-precision floating point binary operation.
* Provide an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* for: add-double, sub-double, mul-double, div-double
*/
/* doubleop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
fldd d1, [r3] @ d1<- vCC
fldd d0, [r2] @ d0<- vBB
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
fmuld d2, d0, d1 @ s2<- op
CLEAR_SHADOW_PAIR r9, ip, lr @ Zero shadow regs
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vAA
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_double: /* 0xae */
/* File: arm/op_div_double.S */
/* File: arm/fbinopWide.S */
/*
* Generic 64-bit double-precision floating point binary operation.
* Provide an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* for: add-double, sub-double, mul-double, div-double
*/
/* doubleop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vCC
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &vBB
fldd d1, [r3] @ d1<- vCC
fldd d0, [r2] @ d0<- vBB
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
fdivd d2, d0, d1 @ s2<- op
CLEAR_SHADOW_PAIR r9, ip, lr @ Zero shadow regs
GET_INST_OPCODE ip @ extract opcode from rINST
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vAA
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_double: /* 0xaf */
/* File: arm/op_rem_double.S */
/* EABI doesn't define a double remainder function, but libm does */
/* File: arm/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH r0, 1 @ r0<- CCBB
mov rINST, rINST, lsr #8 @ rINST<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[AA]
VREG_INDEX_TO_ADDR r2, r2 @ r2<- &fp[BB]
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, lr, ip @ Zero out the shadow regs
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
@ optional op; may set condition codes
bl fmod @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_int_2addr: /* 0xb0 */
/* File: arm/op_add_int_2addr.S */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
add r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_sub_int_2addr: /* 0xb1 */
/* File: arm/op_sub_int_2addr.S */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
sub r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_int_2addr: /* 0xb2 */
/* File: arm/op_mul_int_2addr.S */
/* must be "mul r0, r1, r0" -- "r0, r0, r1" is illegal */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
mul r0, r1, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_div_int_2addr: /* 0xb3 */
/* File: arm/op_div_int_2addr.S */
/*
* Specialized 32-bit binary operation
*
* Performs "r0 = r0 div r1". The selection between sdiv or the gcc helper
* depends on the compile time value of __ARM_ARCH_EXT_IDIV__ (defined for
* ARMv7 CPUs that have hardware division support).
*
* div-int/2addr
*
*/
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
#ifdef __ARM_ARCH_EXT_IDIV__
sdiv r0, r0, r1 @ r0<- op
#else
bl __aeabi_idiv @ r0<- op, r0-r3 changed
#endif
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_rem_int_2addr: /* 0xb4 */
/* File: arm/op_rem_int_2addr.S */
/*
* Specialized 32-bit binary operation
*
* Performs "r1 = r0 rem r1". The selection between sdiv block or the gcc helper
* depends on the compile time value of __ARM_ARCH_EXT_IDIV__ (defined for
* ARMv7 CPUs that have hardware division support).
*
* NOTE: idivmod returns quotient in r0 and remainder in r1
*
* rem-int/2addr
*
*/
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
#ifdef __ARM_ARCH_EXT_IDIV__
sdiv r2, r0, r1
mls r1, r1, r2, r0 @ r1<- op
#else
bl __aeabi_idivmod @ r1<- op, r0-r3 changed
#endif
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r1, r9 @ vAA<- r1
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_and_int_2addr: /* 0xb5 */
/* File: arm/op_and_int_2addr.S */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
and r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_int_2addr: /* 0xb6 */
/* File: arm/op_or_int_2addr.S */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
orr r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_int_2addr: /* 0xb7 */
/* File: arm/op_xor_int_2addr.S */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
eor r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_int_2addr: /* 0xb8 */
/* File: arm/op_shl_int_2addr.S */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asl r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_shr_int_2addr: /* 0xb9 */
/* File: arm/op_shr_int_2addr.S */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_ushr_int_2addr: /* 0xba */
/* File: arm/op_ushr_int_2addr.S */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, lsr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_long_2addr: /* 0xbb */
/* File: arm/op_add_long_2addr.S */
/* File: arm/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
adds r0, r0, r2 @ optional op; may set condition codes
adc r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_sub_long_2addr: /* 0xbc */
/* File: arm/op_sub_long_2addr.S */
/* File: arm/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
subs r0, r0, r2 @ optional op; may set condition codes
sbc r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_long_2addr: /* 0xbd */
/* File: arm/op_mul_long_2addr.S */
/*
* Signed 64-bit integer multiply, "/2addr" version.
*
* See op_mul_long for an explanation.
*
* We get a little tight on registers, so to avoid looking up &fp[A]
* again we stuff it into rINST.
*/
/* mul-long/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR rINST, r9 @ rINST<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia rINST, {r0-r1} @ r0/r1<- vAA/vAA+1
mul ip, r2, r1 @ ip<- ZxW
umull r1, lr, r2, r0 @ r1/lr <- ZxX
mla r2, r0, r3, ip @ r2<- YxX + (ZxW)
mov r0, rINST @ r0<- &fp[A] (free up rINST)
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
add r2, r2, lr @ r2<- r2 + low(ZxW + (YxX))
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r0, {r1-r2} @ vAA/vAA+1<- r1/r2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_long_2addr: /* 0xbe */
/* File: arm/op_div_long_2addr.S */
/* File: arm/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 1
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_ldivmod @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_rem_long_2addr: /* 0xbf */
/* File: arm/op_rem_long_2addr.S */
/* ldivmod returns quotient in r0/r1 and remainder in r2/r3 */
/* File: arm/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 1
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_ldivmod @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r2,r3} @ vAA/vAA+1<- r2/r3
GOTO_OPCODE ip @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_and_long_2addr: /* 0xc0 */
/* File: arm/op_and_long_2addr.S */
/* File: arm/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
and r0, r0, r2 @ optional op; may set condition codes
and r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_long_2addr: /* 0xc1 */
/* File: arm/op_or_long_2addr.S */
/* File: arm/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
orr r0, r0, r2 @ optional op; may set condition codes
orr r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_long_2addr: /* 0xc2 */
/* File: arm/op_xor_long_2addr.S */
/* File: arm/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
eor r0, r0, r2 @ optional op; may set condition codes
eor r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_long_2addr: /* 0xc3 */
/* File: arm/op_shl_long_2addr.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shl-long/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r2, r3 @ r2<- vB
CLEAR_SHADOW_PAIR r9, lr, ip @ Zero out the shadow regs
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[A]
and r2, r2, #63 @ r2<- r2 & 0x3f
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
mov r1, r1, asl r2 @ r1<- r1 << r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r1, r1, r0, lsr r3 @ r1<- r1 | (r0 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
movpl r1, r0, asl ip @ if r2 >= 32, r1<- r0 << (r2-32)
mov r0, r0, asl r2 @ r0<- r0 << r2
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_shr_long_2addr: /* 0xc4 */
/* File: arm/op_shr_long_2addr.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shr-long/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r2, r3 @ r2<- vB
CLEAR_SHADOW_PAIR r9, lr, ip @ Zero out the shadow regs
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[A]
and r2, r2, #63 @ r2<- r2 & 0x3f
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
mov r0, r0, lsr r2 @ r0<- r2 >> r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
movpl r0, r1, asr ip @ if r2 >= 32, r0<-r1 >> (r2-32)
mov r1, r1, asr r2 @ r1<- r1 >> r2
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_ushr_long_2addr: /* 0xc5 */
/* File: arm/op_ushr_long_2addr.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* ushr-long/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r2, r3 @ r2<- vB
CLEAR_SHADOW_PAIR r9, lr, ip @ Zero out the shadow regs
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &fp[A]
and r2, r2, #63 @ r2<- r2 & 0x3f
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
mov r0, r0, lsr r2 @ r0<- r2 >> r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
movpl r0, r1, lsr ip @ if r2 >= 32, r0<-r1 >>> (r2-32)
mov r1, r1, lsr r2 @ r1<- r1 >>> r2
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_float_2addr: /* 0xc6 */
/* File: arm/op_add_float_2addr.S */
/* File: arm/fbinop2addr.S */
/*
* Generic 32-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "s2 = s0 op s1".
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
flds s1, [r3] @ s1<- vB
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
flds s0, [r9] @ s0<- vA
fadds s2, s0, s1 @ s2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_float_2addr: /* 0xc7 */
/* File: arm/op_sub_float_2addr.S */
/* File: arm/fbinop2addr.S */
/*
* Generic 32-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "s2 = s0 op s1".
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
flds s1, [r3] @ s1<- vB
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
flds s0, [r9] @ s0<- vA
fsubs s2, s0, s1 @ s2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_float_2addr: /* 0xc8 */
/* File: arm/op_mul_float_2addr.S */
/* File: arm/fbinop2addr.S */
/*
* Generic 32-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "s2 = s0 op s1".
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
flds s1, [r3] @ s1<- vB
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
flds s0, [r9] @ s0<- vA
fmuls s2, s0, s1 @ s2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_float_2addr: /* 0xc9 */
/* File: arm/op_div_float_2addr.S */
/* File: arm/fbinop2addr.S */
/*
* Generic 32-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "s2 = s0 op s1".
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
flds s1, [r3] @ s1<- vB
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
flds s0, [r9] @ s0<- vA
fdivs s2, s0, s1 @ s2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_float_2addr: /* 0xca */
/* File: arm/op_rem_float_2addr.S */
/* EABI doesn't define a float remainder function, but libm does */
/* File: arm/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r1, r3 @ r1<- vB
GET_VREG r0, r9 @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
bl fmodf @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_double_2addr: /* 0xcb */
/* File: arm/op_add_double_2addr.S */
/* File: arm/fbinopWide2addr.S */
/*
* Generic 64-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
CLEAR_SHADOW_PAIR r9, ip, r0 @ Zero out shadow regs
fldd d1, [r3] @ d1<- vB
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
fldd d0, [r9] @ d0<- vA
faddd d2, d0, d1 @ d2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_double_2addr: /* 0xcc */
/* File: arm/op_sub_double_2addr.S */
/* File: arm/fbinopWide2addr.S */
/*
* Generic 64-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
CLEAR_SHADOW_PAIR r9, ip, r0 @ Zero out shadow regs
fldd d1, [r3] @ d1<- vB
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
fldd d0, [r9] @ d0<- vA
fsubd d2, d0, d1 @ d2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_double_2addr: /* 0xcd */
/* File: arm/op_mul_double_2addr.S */
/* File: arm/fbinopWide2addr.S */
/*
* Generic 64-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
CLEAR_SHADOW_PAIR r9, ip, r0 @ Zero out shadow regs
fldd d1, [r3] @ d1<- vB
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
fldd d0, [r9] @ d0<- vA
fmuld d2, d0, d1 @ d2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_double_2addr: /* 0xce */
/* File: arm/op_div_double_2addr.S */
/* File: arm/fbinopWide2addr.S */
/*
* Generic 64-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
VREG_INDEX_TO_ADDR r3, r3 @ r3<- &vB
CLEAR_SHADOW_PAIR r9, ip, r0 @ Zero out shadow regs
fldd d1, [r3] @ d1<- vB
VREG_INDEX_TO_ADDR r9, r9 @ r9<- &vA
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
fldd d0, [r9] @ d0<- vA
fdivd d2, d0, d1 @ d2<- op
GET_INST_OPCODE ip @ extract opcode from rINST
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_double_2addr: /* 0xcf */
/* File: arm/op_rem_double_2addr.S */
/* EABI doesn't define a double remainder function, but libm does */
/* File: arm/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx rINST, rINST, #8, #4 @ rINST<- A
VREG_INDEX_TO_ADDR r1, r1 @ r1<- &fp[B]
VREG_INDEX_TO_ADDR r9, rINST @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
CLEAR_SHADOW_PAIR rINST, ip, lr @ Zero shadow regs
FETCH_ADVANCE_INST 1 @ advance rPC, load rINST
@ optional op; may set condition codes
bl fmod @ result<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_int_lit16: /* 0xd0 */
/* File: arm/op_add_int_lit16.S */
/* File: arm/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S r1, 1 @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r2 @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
add r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_rsub_int: /* 0xd1 */
/* File: arm/op_rsub_int.S */
/* this op is "rsub-int", but can be thought of as "rsub-int/lit16" */
/* File: arm/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S r1, 1 @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r2 @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
rsb r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_int_lit16: /* 0xd2 */
/* File: arm/op_mul_int_lit16.S */
/* must be "mul r0, r1, r0" -- "r0, r0, r1" is illegal */
/* File: arm/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S r1, 1 @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r2 @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mul r0, r1, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_div_int_lit16: /* 0xd3 */
/* File: arm/op_div_int_lit16.S */
/*
* Specialized 32-bit binary operation
*
* Performs "r0 = r0 div r1". The selection between sdiv or the gcc helper
* depends on the compile time value of __ARM_ARCH_EXT_IDIV__ (defined for
* ARMv7 CPUs that have hardware division support).
*
* div-int/lit16
*
*/
FETCH_S r1, 1 @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r2 @ r0<- vB
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
#ifdef __ARM_ARCH_EXT_IDIV__
sdiv r0, r0, r1 @ r0<- op
#else
bl __aeabi_idiv @ r0<- op, r0-r3 changed
#endif
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_rem_int_lit16: /* 0xd4 */
/* File: arm/op_rem_int_lit16.S */
/*
* Specialized 32-bit binary operation
*
* Performs "r1 = r0 rem r1". The selection between sdiv block or the gcc helper
* depends on the compile time value of __ARM_ARCH_EXT_IDIV__ (defined for
* ARMv7 CPUs that have hardware division support).
*
* NOTE: idivmod returns quotient in r0 and remainder in r1
*
* rem-int/lit16
*
*/
FETCH_S r1, 1 @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r2 @ r0<- vB
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
#ifdef __ARM_ARCH_EXT_IDIV__
sdiv r2, r0, r1
mls r1, r1, r2, r0 @ r1<- op
#else
bl __aeabi_idivmod @ r1<- op, r0-r3 changed
#endif
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r1, r9 @ vAA<- r1
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_and_int_lit16: /* 0xd5 */
/* File: arm/op_and_int_lit16.S */
/* File: arm/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S r1, 1 @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r2 @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
and r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_int_lit16: /* 0xd6 */
/* File: arm/op_or_int_lit16.S */
/* File: arm/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S r1, 1 @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r2 @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
orr r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_int_lit16: /* 0xd7 */
/* File: arm/op_xor_int_lit16.S */
/* File: arm/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S r1, 1 @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG r0, r2 @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
eor r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_int_lit8: /* 0xd8 */
/* File: arm/op_add_int_lit8.S */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
@ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
add r0, r0, r3, asr #8 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_rsub_int_lit8: /* 0xd9 */
/* File: arm/op_rsub_int_lit8.S */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
@ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
rsb r0, r0, r3, asr #8 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_int_lit8: /* 0xda */
/* File: arm/op_mul_int_lit8.S */
/* must be "mul r0, r1, r0" -- "r0, r0, r1" is illegal */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
asr r1, r3, #8 @ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mul r0, r1, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_div_int_lit8: /* 0xdb */
/* File: arm/op_div_int_lit8.S */
/*
* Specialized 32-bit binary operation
*
* Performs "r0 = r0 div r1". The selection between sdiv or the gcc helper
* depends on the compile time value of __ARM_ARCH_EXT_IDIV__ (defined for
* ARMv7 CPUs that have hardware division support).
*
* div-int/lit8
*
*/
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
#ifdef __ARM_ARCH_EXT_IDIV__
sdiv r0, r0, r1 @ r0<- op
#else
bl __aeabi_idiv @ r0<- op, r0-r3 changed
#endif
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_rem_int_lit8: /* 0xdc */
/* File: arm/op_rem_int_lit8.S */
/*
* Specialized 32-bit binary operation
*
* Performs "r1 = r0 rem r1". The selection between sdiv block or the gcc helper
* depends on the compile time value of __ARM_ARCH_EXT_IDIV__ (defined for
* ARMv7 CPUs that have hardware division support).
*
* NOTE: idivmod returns quotient in r0 and remainder in r1
*
* rem-int/lit8
*
*/
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
#ifdef __ARM_ARCH_EXT_IDIV__
sdiv r2, r0, r1
mls r1, r1, r2, r0 @ r1<- op
#else
bl __aeabi_idivmod @ r1<- op, r0-r3 changed
#endif
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r1, r9 @ vAA<- r1
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_and_int_lit8: /* 0xdd */
/* File: arm/op_and_int_lit8.S */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
@ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
and r0, r0, r3, asr #8 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_int_lit8: /* 0xde */
/* File: arm/op_or_int_lit8.S */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
@ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
orr r0, r0, r3, asr #8 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_int_lit8: /* 0xdf */
/* File: arm/op_xor_int_lit8.S */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
@ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
eor r0, r0, r3, asr #8 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_int_lit8: /* 0xe0 */
/* File: arm/op_shl_int_lit8.S */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
ubfx r1, r3, #8, #5 @ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mov r0, r0, asl r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_shr_int_lit8: /* 0xe1 */
/* File: arm/op_shr_int_lit8.S */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
ubfx r1, r3, #8, #5 @ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mov r0, r0, asr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_ushr_int_lit8: /* 0xe2 */
/* File: arm/op_ushr_int_lit8.S */
/* File: arm/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* You can override "extract" if the extraction of the literal value
* from r3 to r1 is not the default "asr r1, r3, #8". The extraction
* can be omitted completely if the shift is embedded in "instr".
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S r3, 1 @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG r0, r2 @ r0<- vBB
ubfx r1, r3, #8, #5 @ optional; typically r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
mov r0, r0, lsr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE ip @ extract opcode from rINST
SET_VREG r0, r9 @ vAA<- r0
GOTO_OPCODE ip @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_iget_quick: /* 0xe3 */
/* File: arm/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- object we're operating on
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
ldr r0, [r3, r1] @ r0<- obj.field
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
SET_VREG r0, r2 @ fp[A]<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_wide_quick: /* 0xe4 */
/* File: arm/op_iget_wide_quick.S */
/* iget-wide-quick vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH ip, 1 @ ip<- field byte offset
GET_VREG r3, r2 @ r3<- object we're operating on
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
ldrd r0, [r3, ip] @ r0<- obj.field (64 bits, aligned)
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
VREG_INDEX_TO_ADDR r3, r2 @ r3<- &fp[A]
CLEAR_SHADOW_PAIR r2, ip, lr @ Zero out the shadow regs
GET_INST_OPCODE ip @ extract opcode from rINST
stmia r3, {r0-r1} @ fp[A]<- r0/r1
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_object_quick: /* 0xe5 */
/* File: arm/op_iget_object_quick.S */
/* For: iget-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
EXPORT_PC
GET_VREG r0, r2 @ r0<- object we're operating on
bl artIGetObjectFromMterp @ (obj, offset)
ldr r3, [rSELF, #THREAD_EXCEPTION_OFFSET]
ubfx r2, rINST, #8, #4 @ r2<- A
PREFETCH_INST 2
cmp r3, #0
bne MterpPossibleException @ bail out
SET_VREG_OBJECT r0, r2 @ fp[A]<- r0
ADVANCE 2 @ advance rPC
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_quick: /* 0xe6 */
/* File: arm/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
GET_VREG r0, r2 @ r0<- fp[A]
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
str r0, [r3, r1] @ obj.field<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_wide_quick: /* 0xe7 */
/* File: arm/op_iput_wide_quick.S */
/* iput-wide-quick vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r3, 1 @ r3<- field byte offset
GET_VREG r2, r2 @ r2<- fp[B], the object pointer
ubfx r0, rINST, #8, #4 @ r0<- A
cmp r2, #0 @ check object for null
beq common_errNullObject @ object was null
VREG_INDEX_TO_ADDR r0, r0 @ r0<- &fp[A]
ldmia r0, {r0-r1} @ r0/r1<- fp[A]/fp[A+1]
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
strd r0, [r2, r3] @ obj.field<- r0/r1
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_object_quick: /* 0xe8 */
/* File: arm/op_iput_object_quick.S */
EXPORT_PC
add r0, rFP, #OFF_FP_SHADOWFRAME
mov r1, rPC
mov r2, rINST
bl MterpIputObjectQuick
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_quick: /* 0xe9 */
/* File: arm/op_invoke_virtual_quick.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualQuick
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeVirtualQuick
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_range_quick: /* 0xea */
/* File: arm/op_invoke_virtual_range_quick.S */
/* File: arm/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualQuickRange
EXPORT_PC
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
mov r3, rINST
bl MterpInvokeVirtualQuickRange
cmp r0, #0
beq MterpException
FETCH_ADVANCE_INST 3
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* ------------------------------ */
.balign 128
.L_op_iput_boolean_quick: /* 0xeb */
/* File: arm/op_iput_boolean_quick.S */
/* File: arm/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
GET_VREG r0, r2 @ r0<- fp[A]
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
strb r0, [r3, r1] @ obj.field<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_byte_quick: /* 0xec */
/* File: arm/op_iput_byte_quick.S */
/* File: arm/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
GET_VREG r0, r2 @ r0<- fp[A]
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
strb r0, [r3, r1] @ obj.field<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_char_quick: /* 0xed */
/* File: arm/op_iput_char_quick.S */
/* File: arm/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
GET_VREG r0, r2 @ r0<- fp[A]
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
strh r0, [r3, r1] @ obj.field<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_short_quick: /* 0xee */
/* File: arm/op_iput_short_quick.S */
/* File: arm/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
GET_VREG r0, r2 @ r0<- fp[A]
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
strh r0, [r3, r1] @ obj.field<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_boolean_quick: /* 0xef */
/* File: arm/op_iget_boolean_quick.S */
/* File: arm/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- object we're operating on
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
ldrb r0, [r3, r1] @ r0<- obj.field
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
SET_VREG r0, r2 @ fp[A]<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_byte_quick: /* 0xf0 */
/* File: arm/op_iget_byte_quick.S */
/* File: arm/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- object we're operating on
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
ldrsb r0, [r3, r1] @ r0<- obj.field
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
SET_VREG r0, r2 @ fp[A]<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_char_quick: /* 0xf1 */
/* File: arm/op_iget_char_quick.S */
/* File: arm/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- object we're operating on
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
ldrh r0, [r3, r1] @ r0<- obj.field
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
SET_VREG r0, r2 @ fp[A]<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_short_quick: /* 0xf2 */
/* File: arm/op_iget_short_quick.S */
/* File: arm/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH r1, 1 @ r1<- field byte offset
GET_VREG r3, r2 @ r3<- object we're operating on
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
ldrsh r0, [r3, r1] @ r0<- obj.field
FETCH_ADVANCE_INST 2 @ advance rPC, load rINST
SET_VREG r0, r2 @ fp[A]<- r0
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_unused_f3: /* 0xf3 */
/* File: arm/op_unused_f3.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f4: /* 0xf4 */
/* File: arm/op_unused_f4.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f5: /* 0xf5 */
/* File: arm/op_unused_f5.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f6: /* 0xf6 */
/* File: arm/op_unused_f6.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f7: /* 0xf7 */
/* File: arm/op_unused_f7.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f8: /* 0xf8 */
/* File: arm/op_unused_f8.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f9: /* 0xf9 */
/* File: arm/op_unused_f9.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_invoke_polymorphic: /* 0xfa */
/* Transfer stub to alternate interpreter */
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_invoke_polymorphic_range: /* 0xfb */
/* Transfer stub to alternate interpreter */
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fc: /* 0xfc */
/* File: arm/op_unused_fc.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fd: /* 0xfd */
/* File: arm/op_unused_fd.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fe: /* 0xfe */
/* File: arm/op_unused_fe.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_ff: /* 0xff */
/* File: arm/op_unused_ff.S */
/* File: arm/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
.balign 128
.size artMterpAsmInstructionStart, .-artMterpAsmInstructionStart
.global artMterpAsmInstructionEnd
artMterpAsmInstructionEnd:
/*
* ===========================================================================
* Sister implementations
* ===========================================================================
*/
.global artMterpAsmSisterStart
.type artMterpAsmSisterStart, %function
.text
.balign 4
artMterpAsmSisterStart:
/* continuation for op_float_to_long */
/*
* Convert the float in r0 to a long in r0/r1.
*
* We have to clip values to long min/max per the specification. The
* expected common case is a "reasonable" value that converts directly
* to modest integer. The EABI convert function isn't doing this for us.
*/
f2l_doconv:
ubfx r2, r0, #23, #8 @ grab the exponent
cmp r2, #0xbe @ MININT < x > MAXINT?
bhs f2l_special_cases
b __aeabi_f2lz @ tail call to convert float to long
f2l_special_cases:
cmp r2, #0xff @ NaN or infinity?
beq f2l_maybeNaN
f2l_notNaN:
adds r0, r0, r0 @ sign bit to carry
mov r0, #0xffffffff @ assume maxlong for lsw
mov r1, #0x7fffffff @ assume maxlong for msw
adc r0, r0, #0
adc r1, r1, #0 @ convert maxlong to minlong if exp negative
bx lr @ return
f2l_maybeNaN:
lsls r3, r0, #9
beq f2l_notNaN @ if fraction is non-zero, it's a NaN
mov r0, #0
mov r1, #0
bx lr @ return 0 for NaN
/* continuation for op_double_to_long */
/*
* Convert the double in r0/r1 to a long in r0/r1.
*
* We have to clip values to long min/max per the specification. The
* expected common case is a "reasonable" value that converts directly
* to modest integer. The EABI convert function isn't doing this for us.
*/
d2l_doconv:
ubfx r2, r1, #20, #11 @ grab the exponent
movw r3, #0x43e
cmp r2, r3 @ MINLONG < x > MAXLONG?
bhs d2l_special_cases
b __aeabi_d2lz @ tail call to convert double to long
d2l_special_cases:
movw r3, #0x7ff
cmp r2, r3
beq d2l_maybeNaN @ NaN?
d2l_notNaN:
adds r1, r1, r1 @ sign bit to carry
mov r0, #0xffffffff @ assume maxlong for lsw
mov r1, #0x7fffffff @ assume maxlong for msw
adc r0, r0, #0
adc r1, r1, #0 @ convert maxlong to minlong if exp negative
bx lr @ return
d2l_maybeNaN:
orrs r3, r0, r1, lsl #12
beq d2l_notNaN @ if fraction is non-zero, it's a NaN
mov r0, #0
mov r1, #0
bx lr @ return 0 for NaN
.size artMterpAsmSisterStart, .-artMterpAsmSisterStart
.global artMterpAsmSisterEnd
artMterpAsmSisterEnd:
.global artMterpAsmAltInstructionStart
.type artMterpAsmAltInstructionStart, %function
.text
artMterpAsmAltInstructionStart = .L_ALT_op_nop
/* ------------------------------ */
.balign 128
.L_ALT_op_nop: /* 0x00 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (0 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move: /* 0x01 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (1 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_from16: /* 0x02 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (2 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_16: /* 0x03 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (3 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide: /* 0x04 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (4 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide_from16: /* 0x05 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (5 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide_16: /* 0x06 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (6 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object: /* 0x07 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (7 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object_from16: /* 0x08 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (8 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object_16: /* 0x09 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (9 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result: /* 0x0a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (10 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result_wide: /* 0x0b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (11 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result_object: /* 0x0c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (12 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_move_exception: /* 0x0d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (13 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return_void: /* 0x0e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (14 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return: /* 0x0f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (15 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return_wide: /* 0x10 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (16 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return_object: /* 0x11 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (17 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_4: /* 0x12 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (18 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_16: /* 0x13 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (19 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const: /* 0x14 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (20 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_high16: /* 0x15 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (21 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_16: /* 0x16 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (22 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_32: /* 0x17 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (23 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide: /* 0x18 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (24 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_high16: /* 0x19 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (25 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_string: /* 0x1a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (26 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_string_jumbo: /* 0x1b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (27 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_const_class: /* 0x1c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (28 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_monitor_enter: /* 0x1d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (29 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_monitor_exit: /* 0x1e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (30 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_check_cast: /* 0x1f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (31 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_instance_of: /* 0x20 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (32 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_array_length: /* 0x21 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (33 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_new_instance: /* 0x22 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (34 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_new_array: /* 0x23 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (35 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_filled_new_array: /* 0x24 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (36 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_filled_new_array_range: /* 0x25 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (37 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_fill_array_data: /* 0x26 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (38 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_throw: /* 0x27 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (39 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_goto: /* 0x28 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (40 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_goto_16: /* 0x29 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (41 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_goto_32: /* 0x2a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (42 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_packed_switch: /* 0x2b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (43 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sparse_switch: /* 0x2c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (44 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpl_float: /* 0x2d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (45 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpg_float: /* 0x2e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (46 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpl_double: /* 0x2f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (47 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpg_double: /* 0x30 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (48 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_cmp_long: /* 0x31 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (49 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_eq: /* 0x32 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (50 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ne: /* 0x33 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (51 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_lt: /* 0x34 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (52 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ge: /* 0x35 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (53 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gt: /* 0x36 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (54 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_le: /* 0x37 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (55 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_eqz: /* 0x38 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (56 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_nez: /* 0x39 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (57 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ltz: /* 0x3a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (58 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gez: /* 0x3b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (59 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gtz: /* 0x3c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (60 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_if_lez: /* 0x3d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (61 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_3e: /* 0x3e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (62 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_3f: /* 0x3f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (63 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_40: /* 0x40 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (64 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_41: /* 0x41 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (65 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_42: /* 0x42 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (66 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_43: /* 0x43 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (67 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget: /* 0x44 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (68 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_wide: /* 0x45 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (69 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_object: /* 0x46 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (70 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_boolean: /* 0x47 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (71 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_byte: /* 0x48 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (72 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_char: /* 0x49 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (73 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_short: /* 0x4a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (74 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput: /* 0x4b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (75 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_wide: /* 0x4c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (76 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_object: /* 0x4d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (77 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_boolean: /* 0x4e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (78 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_byte: /* 0x4f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (79 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_char: /* 0x50 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (80 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_short: /* 0x51 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (81 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget: /* 0x52 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (82 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_wide: /* 0x53 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (83 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_object: /* 0x54 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (84 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_boolean: /* 0x55 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (85 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_byte: /* 0x56 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (86 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_char: /* 0x57 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (87 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_short: /* 0x58 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (88 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput: /* 0x59 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (89 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_wide: /* 0x5a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (90 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_object: /* 0x5b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (91 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_boolean: /* 0x5c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (92 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_byte: /* 0x5d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (93 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_char: /* 0x5e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (94 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_short: /* 0x5f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (95 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget: /* 0x60 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (96 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_wide: /* 0x61 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (97 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_object: /* 0x62 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (98 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_boolean: /* 0x63 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (99 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_byte: /* 0x64 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (100 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_char: /* 0x65 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (101 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_short: /* 0x66 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (102 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput: /* 0x67 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (103 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_wide: /* 0x68 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (104 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_object: /* 0x69 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (105 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_boolean: /* 0x6a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (106 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_byte: /* 0x6b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (107 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_char: /* 0x6c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (108 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_short: /* 0x6d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (109 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual: /* 0x6e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (110 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_super: /* 0x6f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (111 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_direct: /* 0x70 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (112 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_static: /* 0x71 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (113 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_interface: /* 0x72 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (114 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_return_void_no_barrier: /* 0x73 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (115 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_range: /* 0x74 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (116 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_super_range: /* 0x75 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (117 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_direct_range: /* 0x76 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (118 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_static_range: /* 0x77 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (119 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_interface_range: /* 0x78 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (120 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_79: /* 0x79 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (121 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_7a: /* 0x7a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (122 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_int: /* 0x7b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (123 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_not_int: /* 0x7c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (124 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_long: /* 0x7d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (125 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_not_long: /* 0x7e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (126 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_float: /* 0x7f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (127 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_double: /* 0x80 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (128 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_long: /* 0x81 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (129 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_float: /* 0x82 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (130 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_double: /* 0x83 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (131 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_int: /* 0x84 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (132 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_float: /* 0x85 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (133 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_double: /* 0x86 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (134 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_int: /* 0x87 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (135 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_long: /* 0x88 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (136 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_double: /* 0x89 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (137 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_int: /* 0x8a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (138 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_long: /* 0x8b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (139 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_float: /* 0x8c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (140 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_byte: /* 0x8d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (141 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_char: /* 0x8e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (142 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_short: /* 0x8f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (143 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int: /* 0x90 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (144 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_int: /* 0x91 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (145 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int: /* 0x92 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (146 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int: /* 0x93 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (147 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int: /* 0x94 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (148 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int: /* 0x95 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (149 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int: /* 0x96 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (150 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int: /* 0x97 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (151 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int: /* 0x98 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (152 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int: /* 0x99 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (153 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int: /* 0x9a */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (154 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_long: /* 0x9b */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (155 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_long: /* 0x9c */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (156 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_long: /* 0x9d */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (157 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_long: /* 0x9e */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (158 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_long: /* 0x9f */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (159 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_long: /* 0xa0 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (160 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_long: /* 0xa1 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (161 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_long: /* 0xa2 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (162 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_long: /* 0xa3 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (163 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_long: /* 0xa4 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (164 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_long: /* 0xa5 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (165 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_float: /* 0xa6 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (166 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_float: /* 0xa7 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (167 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_float: /* 0xa8 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (168 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_float: /* 0xa9 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (169 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_float: /* 0xaa */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (170 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_double: /* 0xab */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (171 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_double: /* 0xac */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (172 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_double: /* 0xad */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (173 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_double: /* 0xae */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (174 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_double: /* 0xaf */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (175 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_2addr: /* 0xb0 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (176 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_int_2addr: /* 0xb1 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (177 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_2addr: /* 0xb2 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (178 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_2addr: /* 0xb3 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (179 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_2addr: /* 0xb4 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (180 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_2addr: /* 0xb5 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (181 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_2addr: /* 0xb6 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (182 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_2addr: /* 0xb7 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (183 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int_2addr: /* 0xb8 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (184 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int_2addr: /* 0xb9 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (185 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int_2addr: /* 0xba */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (186 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_long_2addr: /* 0xbb */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (187 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_long_2addr: /* 0xbc */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (188 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_long_2addr: /* 0xbd */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (189 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_long_2addr: /* 0xbe */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (190 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_long_2addr: /* 0xbf */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (191 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_long_2addr: /* 0xc0 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (192 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_long_2addr: /* 0xc1 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (193 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_long_2addr: /* 0xc2 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (194 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_long_2addr: /* 0xc3 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (195 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_long_2addr: /* 0xc4 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (196 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_long_2addr: /* 0xc5 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (197 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_float_2addr: /* 0xc6 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (198 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_float_2addr: /* 0xc7 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (199 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_float_2addr: /* 0xc8 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (200 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_float_2addr: /* 0xc9 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (201 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_float_2addr: /* 0xca */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (202 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_double_2addr: /* 0xcb */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (203 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_double_2addr: /* 0xcc */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (204 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_double_2addr: /* 0xcd */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (205 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_double_2addr: /* 0xce */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (206 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_double_2addr: /* 0xcf */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (207 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_lit16: /* 0xd0 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (208 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rsub_int: /* 0xd1 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (209 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_lit16: /* 0xd2 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (210 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_lit16: /* 0xd3 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (211 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_lit16: /* 0xd4 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (212 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_lit16: /* 0xd5 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (213 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_lit16: /* 0xd6 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (214 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_lit16: /* 0xd7 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (215 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_lit8: /* 0xd8 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (216 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rsub_int_lit8: /* 0xd9 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (217 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_lit8: /* 0xda */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (218 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_lit8: /* 0xdb */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (219 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_lit8: /* 0xdc */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (220 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_lit8: /* 0xdd */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (221 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_lit8: /* 0xde */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (222 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_lit8: /* 0xdf */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (223 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int_lit8: /* 0xe0 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (224 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int_lit8: /* 0xe1 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (225 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int_lit8: /* 0xe2 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (226 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_quick: /* 0xe3 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (227 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_wide_quick: /* 0xe4 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (228 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_object_quick: /* 0xe5 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (229 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_quick: /* 0xe6 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (230 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_wide_quick: /* 0xe7 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (231 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_object_quick: /* 0xe8 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (232 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_quick: /* 0xe9 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (233 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_range_quick: /* 0xea */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (234 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_boolean_quick: /* 0xeb */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (235 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_byte_quick: /* 0xec */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (236 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_char_quick: /* 0xed */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (237 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_short_quick: /* 0xee */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (238 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_boolean_quick: /* 0xef */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (239 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_byte_quick: /* 0xf0 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (240 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_char_quick: /* 0xf1 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (241 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_short_quick: /* 0xf2 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (242 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f3: /* 0xf3 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (243 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f4: /* 0xf4 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (244 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f5: /* 0xf5 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (245 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f6: /* 0xf6 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (246 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f7: /* 0xf7 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (247 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f8: /* 0xf8 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (248 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f9: /* 0xf9 */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (249 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_polymorphic: /* 0xfa */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (250 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_polymorphic_range: /* 0xfb */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (251 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fc: /* 0xfc */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (252 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fd: /* 0xfd */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (253 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fe: /* 0xfe */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (254 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_ff: /* 0xff */
/* File: arm/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET] @ refresh IBASE.
adrl lr, artMterpAsmInstructionStart + (255 * 128) @ Addr of primary handler.
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rPC
b MterpCheckBefore @ (self, shadow_frame, dex_pc_ptr) @ Tail call.
.balign 128
.size artMterpAsmAltInstructionStart, .-artMterpAsmAltInstructionStart
.global artMterpAsmAltInstructionEnd
artMterpAsmAltInstructionEnd:
/* File: arm/footer.S */
/*
* ===========================================================================
* Common subroutines and data
* ===========================================================================
*/
.text
.align 2
/*
* We've detected a condition that will result in an exception, but the exception
* has not yet been thrown. Just bail out to the reference interpreter to deal with it.
* TUNING: for consistency, we may want to just go ahead and handle these here.
*/
common_errDivideByZero:
EXPORT_PC
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpLogDivideByZeroException
#endif
b MterpCommonFallback
common_errArrayIndex:
EXPORT_PC
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpLogArrayIndexException
#endif
b MterpCommonFallback
common_errNegativeArraySize:
EXPORT_PC
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpLogNegativeArraySizeException
#endif
b MterpCommonFallback
common_errNoSuchMethod:
EXPORT_PC
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpLogNoSuchMethodException
#endif
b MterpCommonFallback
common_errNullObject:
EXPORT_PC
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpLogNullObjectException
#endif
b MterpCommonFallback
common_exceptionThrown:
EXPORT_PC
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpLogExceptionThrownException
#endif
b MterpCommonFallback
MterpSuspendFallback:
EXPORT_PC
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
ldr r2, [rSELF, #THREAD_FLAGS_OFFSET]
bl MterpLogSuspendFallback
#endif
b MterpCommonFallback
/*
* If we're here, something is out of the ordinary. If there is a pending
* exception, handle it. Otherwise, roll back and retry with the reference
* interpreter.
*/
MterpPossibleException:
ldr r0, [rSELF, #THREAD_EXCEPTION_OFFSET]
cmp r0, #0 @ Exception pending?
beq MterpFallback @ If not, fall back to reference interpreter.
/* intentional fallthrough - handle pending exception. */
/*
* On return from a runtime helper routine, we've found a pending exception.
* Can we handle it here - or need to bail out to caller?
*
*/
MterpException:
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpHandleException @ (self, shadow_frame)
cmp r0, #0
beq MterpExceptionReturn @ no local catch, back to caller.
ldr r0, [rFP, #OFF_FP_CODE_ITEM]
ldr r1, [rFP, #OFF_FP_DEX_PC]
ldr rIBASE, [rSELF, #THREAD_CURRENT_IBASE_OFFSET]
add rPC, r0, #CODEITEM_INSNS_OFFSET
add rPC, rPC, r1, lsl #1 @ generate new dex_pc_ptr
/* Do we need to switch interpreters? */
bl MterpShouldSwitchInterpreters
cmp r0, #0
bne MterpFallback
/* resume execution at catch block */
EXPORT_PC
FETCH_INST
GET_INST_OPCODE ip
GOTO_OPCODE ip
/* NOTE: no fallthrough */
/*
* Common handling for branches with support for Jit profiling.
* On entry:
* rINST <= signed offset
* rPROFILE <= signed hotness countdown (expanded to 32 bits)
* condition bits <= set to establish sign of offset (use "NoFlags" entry if not)
*
* We have quite a few different cases for branch profiling, OSR detection and
* suspend check support here.
*
* Taken backward branches:
* If profiling active, do hotness countdown and report if we hit zero.
* If in osr check mode, see if our target is a compiled loop header entry and do OSR if so.
* Is there a pending suspend request? If so, suspend.
*
* Taken forward branches and not-taken backward branches:
* If in osr check mode, see if our target is a compiled loop header entry and do OSR if so.
*
* Our most common case is expected to be a taken backward branch with active jit profiling,
* but no full OSR check and no pending suspend request.
* Next most common case is not-taken branch with no full OSR check.
*
*/
MterpCommonTakenBranchNoFlags:
cmp rINST, #0
MterpCommonTakenBranch:
bgt .L_forward_branch @ don't add forward branches to hotness
/*
* We need to subtract 1 from positive values and we should not see 0 here,
* so we may use the result of the comparison with -1.
*/
#if JIT_CHECK_OSR != -1
# error "JIT_CHECK_OSR must be -1."
#endif
cmp rPROFILE, #JIT_CHECK_OSR
beq .L_osr_check
subgts rPROFILE, #1
beq .L_add_batch @ counted down to zero - report
.L_resume_backward_branch:
ldr lr, [rSELF, #THREAD_FLAGS_OFFSET]
REFRESH_IBASE
add r2, rINST, rINST @ r2<- byte offset
FETCH_ADVANCE_INST_RB r2 @ update rPC, load rINST
ands lr, #THREAD_SUSPEND_OR_CHECKPOINT_REQUEST
bne .L_suspend_request_pending
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
.L_suspend_request_pending:
EXPORT_PC
mov r0, rSELF
bl MterpSuspendCheck @ (self)
cmp r0, #0
bne MterpFallback
REFRESH_IBASE @ might have changed during suspend
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
.L_no_count_backwards:
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
bne .L_resume_backward_branch
.L_osr_check:
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rINST
EXPORT_PC
bl MterpMaybeDoOnStackReplacement @ (self, shadow_frame, offset)
cmp r0, #0
bne MterpOnStackReplacement
b .L_resume_backward_branch
.L_forward_branch:
cmp rPROFILE, #JIT_CHECK_OSR @ possible OSR re-entry?
beq .L_check_osr_forward
.L_resume_forward_branch:
add r2, rINST, rINST @ r2<- byte offset
FETCH_ADVANCE_INST_RB r2 @ update rPC, load rINST
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
.L_check_osr_forward:
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rINST
EXPORT_PC
bl MterpMaybeDoOnStackReplacement @ (self, shadow_frame, offset)
cmp r0, #0
bne MterpOnStackReplacement
b .L_resume_forward_branch
.L_add_batch:
add r1, rFP, #OFF_FP_SHADOWFRAME
strh rPROFILE, [r1, #SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET]
ldr r0, [rFP, #OFF_FP_METHOD]
mov r2, rSELF
bl MterpAddHotnessBatch @ (method, shadow_frame, self)
mov rPROFILE, r0 @ restore new hotness countdown to rPROFILE
b .L_no_count_backwards
/*
* Entered from the conditional branch handlers when OSR check request active on
* not-taken path. All Dalvik not-taken conditional branch offsets are 2.
*/
.L_check_not_taken_osr:
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, #2
EXPORT_PC
bl MterpMaybeDoOnStackReplacement @ (self, shadow_frame, offset)
cmp r0, #0
bne MterpOnStackReplacement
FETCH_ADVANCE_INST 2
GET_INST_OPCODE ip @ extract opcode from rINST
GOTO_OPCODE ip @ jump to next instruction
/*
* On-stack replacement has happened, and now we've returned from the compiled method.
*/
MterpOnStackReplacement:
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rINST
bl MterpLogOSR
#endif
mov r0, #1 @ Signal normal return
b MterpDone
/*
* Bail out to reference interpreter.
*/
MterpFallback:
EXPORT_PC
#if MTERP_LOGGING
mov r0, rSELF
add r1, rFP, #OFF_FP_SHADOWFRAME
bl MterpLogFallback
#endif
MterpCommonFallback:
mov r0, #0 @ signal retry with reference interpreter.
b MterpDone
/*
* We pushed some registers on the stack in ExecuteMterpImpl, then saved
* SP and LR. Here we restore SP, restore the registers, and then restore
* LR to PC.
*
* On entry:
* uint32_t* rFP (should still be live, pointer to base of vregs)
*/
MterpExceptionReturn:
mov r0, #1 @ signal return to caller.
b MterpDone
MterpReturn:
ldr r2, [rFP, #OFF_FP_RESULT_REGISTER]
str r0, [r2]
str r1, [r2, #4]
mov r0, #1 @ signal return to caller.
MterpDone:
/*
* At this point, we expect rPROFILE to be non-zero. If negative, hotness is disabled or we're
* checking for OSR. If greater than zero, we might have unreported hotness to register
* (the difference between the ending rPROFILE and the cached hotness counter). rPROFILE
* should only reach zero immediately after a hotness decrement, and is then reset to either
* a negative special state or the new non-zero countdown value.
*/
cmp rPROFILE, #0
bgt MterpProfileActive @ if > 0, we may have some counts to report.
ldmfd sp!, {r3-r10,fp,pc} @ restore 10 regs and return
MterpProfileActive:
mov rINST, r0 @ stash return value
/* Report cached hotness counts */
ldr r0, [rFP, #OFF_FP_METHOD]
add r1, rFP, #OFF_FP_SHADOWFRAME
mov r2, rSELF
strh rPROFILE, [r1, #SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET]
bl MterpAddHotnessBatch @ (method, shadow_frame, self)
mov r0, rINST @ restore return value
ldmfd sp!, {r3-r10,fp,pc} @ restore 10 regs and return
END ExecuteMterpImpl