| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "arm64_lir.h" |
| #include "codegen_arm64.h" |
| #include "dex/quick/mir_to_lir-inl.h" |
| |
| namespace art { |
| |
| /* This file contains codegen for the A64 ISA. */ |
| |
| static int32_t EncodeImmSingle(uint32_t bits) { |
| /* |
| * Valid values will have the form: |
| * |
| * aBbb.bbbc.defg.h000.0000.0000.0000.0000 |
| * |
| * where B = not(b). In other words, if b == 1, then B == 0 and viceversa. |
| */ |
| |
| // bits[19..0] are cleared. |
| if ((bits & 0x0007ffff) != 0) |
| return -1; |
| |
| // bits[29..25] are all set or all cleared. |
| uint32_t b_pattern = (bits >> 16) & 0x3e00; |
| if (b_pattern != 0 && b_pattern != 0x3e00) |
| return -1; |
| |
| // bit[30] and bit[29] are opposite. |
| if (((bits ^ (bits << 1)) & 0x40000000) == 0) |
| return -1; |
| |
| // bits: aBbb.bbbc.defg.h000.0000.0000.0000.0000 |
| // bit7: a000.0000 |
| uint32_t bit7 = ((bits >> 31) & 0x1) << 7; |
| // bit6: 0b00.0000 |
| uint32_t bit6 = ((bits >> 29) & 0x1) << 6; |
| // bit5_to_0: 00cd.efgh |
| uint32_t bit5_to_0 = (bits >> 19) & 0x3f; |
| return (bit7 | bit6 | bit5_to_0); |
| } |
| |
| static int32_t EncodeImmDouble(uint64_t bits) { |
| /* |
| * Valid values will have the form: |
| * |
| * aBbb.bbbb.bbcd.efgh.0000.0000.0000.0000 |
| * 0000.0000.0000.0000.0000.0000.0000.0000 |
| * |
| * where B = not(b). |
| */ |
| |
| // bits[47..0] are cleared. |
| if ((bits & UINT64_C(0xffffffffffff)) != 0) |
| return -1; |
| |
| // bits[61..54] are all set or all cleared. |
| uint32_t b_pattern = (bits >> 48) & 0x3fc0; |
| if (b_pattern != 0 && b_pattern != 0x3fc0) |
| return -1; |
| |
| // bit[62] and bit[61] are opposite. |
| if (((bits ^ (bits << 1)) & UINT64_C(0x4000000000000000)) == 0) |
| return -1; |
| |
| // bit7: a000.0000 |
| uint32_t bit7 = ((bits >> 63) & 0x1) << 7; |
| // bit6: 0b00.0000 |
| uint32_t bit6 = ((bits >> 61) & 0x1) << 6; |
| // bit5_to_0: 00cd.efgh |
| uint32_t bit5_to_0 = (bits >> 48) & 0x3f; |
| return (bit7 | bit6 | bit5_to_0); |
| } |
| |
| LIR* Arm64Mir2Lir::LoadFPConstantValue(RegStorage r_dest, int32_t value) { |
| DCHECK(r_dest.IsSingle()); |
| if (value == 0) { |
| return NewLIR2(kA64Fmov2sw, r_dest.GetReg(), rwzr); |
| } else { |
| int32_t encoded_imm = EncodeImmSingle((uint32_t)value); |
| if (encoded_imm >= 0) { |
| return NewLIR2(kA64Fmov2fI, r_dest.GetReg(), encoded_imm); |
| } |
| } |
| |
| LIR* data_target = ScanLiteralPool(literal_list_, value, 0); |
| if (data_target == NULL) { |
| // Wide, as we need 8B alignment. |
| data_target = AddWideData(&literal_list_, value, 0); |
| } |
| |
| ScopedMemRefType mem_ref_type(this, ResourceMask::kLiteral); |
| LIR* load_pc_rel = RawLIR(current_dalvik_offset_, kA64Ldr2fp, |
| r_dest.GetReg(), 0, 0, 0, 0, data_target); |
| AppendLIR(load_pc_rel); |
| return load_pc_rel; |
| } |
| |
| LIR* Arm64Mir2Lir::LoadFPConstantValueWide(RegStorage r_dest, int64_t value) { |
| DCHECK(r_dest.IsDouble()); |
| if (value == 0) { |
| return NewLIR2(kA64Fmov2Sx, r_dest.GetReg(), rxzr); |
| } else { |
| int32_t encoded_imm = EncodeImmDouble(value); |
| if (encoded_imm >= 0) { |
| return NewLIR2(FWIDE(kA64Fmov2fI), r_dest.GetReg(), encoded_imm); |
| } |
| } |
| |
| // No short form - load from the literal pool. |
| int32_t val_lo = Low32Bits(value); |
| int32_t val_hi = High32Bits(value); |
| LIR* data_target = ScanLiteralPoolWide(literal_list_, val_lo, val_hi); |
| if (data_target == NULL) { |
| data_target = AddWideData(&literal_list_, val_lo, val_hi); |
| } |
| |
| ScopedMemRefType mem_ref_type(this, ResourceMask::kLiteral); |
| LIR* load_pc_rel = RawLIR(current_dalvik_offset_, FWIDE(kA64Ldr2fp), |
| r_dest.GetReg(), 0, 0, 0, 0, data_target); |
| AppendLIR(load_pc_rel); |
| return load_pc_rel; |
| } |
| |
| static int CountLeadingZeros(bool is_wide, uint64_t value) { |
| return (is_wide) ? __builtin_clzll(value) : __builtin_clz((uint32_t)value); |
| } |
| |
| static int CountTrailingZeros(bool is_wide, uint64_t value) { |
| return (is_wide) ? __builtin_ctzll(value) : __builtin_ctz((uint32_t)value); |
| } |
| |
| static int CountSetBits(bool is_wide, uint64_t value) { |
| return ((is_wide) ? |
| __builtin_popcountll(value) : __builtin_popcount((uint32_t)value)); |
| } |
| |
| /** |
| * @brief Try encoding an immediate in the form required by logical instructions. |
| * |
| * @param is_wide Whether @p value is a 64-bit (as opposed to 32-bit) value. |
| * @param value An integer to be encoded. This is interpreted as 64-bit if @p is_wide is true and as |
| * 32-bit if @p is_wide is false. |
| * @return A non-negative integer containing the encoded immediate or -1 if the encoding failed. |
| * @note This is the inverse of Arm64Mir2Lir::DecodeLogicalImmediate(). |
| */ |
| int Arm64Mir2Lir::EncodeLogicalImmediate(bool is_wide, uint64_t value) { |
| unsigned n, imm_s, imm_r; |
| |
| // Logical immediates are encoded using parameters n, imm_s and imm_r using |
| // the following table: |
| // |
| // N imms immr size S R |
| // 1 ssssss rrrrrr 64 UInt(ssssss) UInt(rrrrrr) |
| // 0 0sssss xrrrrr 32 UInt(sssss) UInt(rrrrr) |
| // 0 10ssss xxrrrr 16 UInt(ssss) UInt(rrrr) |
| // 0 110sss xxxrrr 8 UInt(sss) UInt(rrr) |
| // 0 1110ss xxxxrr 4 UInt(ss) UInt(rr) |
| // 0 11110s xxxxxr 2 UInt(s) UInt(r) |
| // (s bits must not be all set) |
| // |
| // A pattern is constructed of size bits, where the least significant S+1 |
| // bits are set. The pattern is rotated right by R, and repeated across a |
| // 32 or 64-bit value, depending on destination register width. |
| // |
| // To test if an arbitary immediate can be encoded using this scheme, an |
| // iterative algorithm is used. |
| // |
| |
| // 1. If the value has all set or all clear bits, it can't be encoded. |
| if (value == 0 || value == ~UINT64_C(0) || |
| (!is_wide && (uint32_t)value == ~UINT32_C(0))) { |
| return -1; |
| } |
| |
| unsigned lead_zero = CountLeadingZeros(is_wide, value); |
| unsigned lead_one = CountLeadingZeros(is_wide, ~value); |
| unsigned trail_zero = CountTrailingZeros(is_wide, value); |
| unsigned trail_one = CountTrailingZeros(is_wide, ~value); |
| unsigned set_bits = CountSetBits(is_wide, value); |
| |
| // The fixed bits in the immediate s field. |
| // If width == 64 (X reg), start at 0xFFFFFF80. |
| // If width == 32 (W reg), start at 0xFFFFFFC0, as the iteration for 64-bit |
| // widths won't be executed. |
| unsigned width = (is_wide) ? 64 : 32; |
| int imm_s_fixed = (is_wide) ? -128 : -64; |
| int imm_s_mask = 0x3f; |
| |
| for (;;) { |
| // 2. If the value is two bits wide, it can be encoded. |
| if (width == 2) { |
| n = 0; |
| imm_s = 0x3C; |
| imm_r = (value & 3) - 1; |
| break; |
| } |
| |
| n = (width == 64) ? 1 : 0; |
| imm_s = ((imm_s_fixed | (set_bits - 1)) & imm_s_mask); |
| if ((lead_zero + set_bits) == width) { |
| imm_r = 0; |
| } else { |
| imm_r = (lead_zero > 0) ? (width - trail_zero) : lead_one; |
| } |
| |
| // 3. If the sum of leading zeros, trailing zeros and set bits is |
| // equal to the bit width of the value, it can be encoded. |
| if (lead_zero + trail_zero + set_bits == width) { |
| break; |
| } |
| |
| // 4. If the sum of leading ones, trailing ones and unset bits in the |
| // value is equal to the bit width of the value, it can be encoded. |
| if (lead_one + trail_one + (width - set_bits) == width) { |
| break; |
| } |
| |
| // 5. If the most-significant half of the bitwise value is equal to |
| // the least-significant half, return to step 2 using the |
| // least-significant half of the value. |
| uint64_t mask = (UINT64_C(1) << (width >> 1)) - 1; |
| if ((value & mask) == ((value >> (width >> 1)) & mask)) { |
| width >>= 1; |
| set_bits >>= 1; |
| imm_s_fixed >>= 1; |
| continue; |
| } |
| |
| // 6. Otherwise, the value can't be encoded. |
| return -1; |
| } |
| |
| return (n << 12 | imm_r << 6 | imm_s); |
| } |
| |
| bool Arm64Mir2Lir::InexpensiveConstantInt(int32_t value) { |
| return false; // (ModifiedImmediate(value) >= 0) || (ModifiedImmediate(~value) >= 0); |
| } |
| |
| bool Arm64Mir2Lir::InexpensiveConstantFloat(int32_t value) { |
| return EncodeImmSingle(value) >= 0; |
| } |
| |
| bool Arm64Mir2Lir::InexpensiveConstantLong(int64_t value) { |
| return InexpensiveConstantInt(High32Bits(value)) && InexpensiveConstantInt(Low32Bits(value)); |
| } |
| |
| bool Arm64Mir2Lir::InexpensiveConstantDouble(int64_t value) { |
| return EncodeImmDouble(value) >= 0; |
| } |
| |
| /* |
| * Load a immediate using one single instruction when possible; otherwise |
| * use a pair of movz and movk instructions. |
| * |
| * No additional register clobbering operation performed. Use this version when |
| * 1) r_dest is freshly returned from AllocTemp or |
| * 2) The codegen is under fixed register usage |
| */ |
| LIR* Arm64Mir2Lir::LoadConstantNoClobber(RegStorage r_dest, int value) { |
| LIR* res; |
| |
| if (r_dest.IsFloat()) { |
| return LoadFPConstantValue(r_dest, value); |
| } |
| |
| if (r_dest.Is64Bit()) { |
| return LoadConstantWide(r_dest, value); |
| } |
| |
| // Loading SP/ZR with an immediate is not supported. |
| DCHECK(!A64_REG_IS_SP(r_dest.GetReg())); |
| DCHECK(!A64_REG_IS_ZR(r_dest.GetReg())); |
| |
| // Compute how many movk, movz instructions are needed to load the value. |
| uint16_t high_bits = High16Bits(value); |
| uint16_t low_bits = Low16Bits(value); |
| |
| bool low_fast = ((uint16_t)(low_bits + 1) <= 1); |
| bool high_fast = ((uint16_t)(high_bits + 1) <= 1); |
| |
| if (LIKELY(low_fast || high_fast)) { |
| // 1 instruction is enough to load the immediate. |
| if (LIKELY(low_bits == high_bits)) { |
| // Value is either 0 or -1: we can just use wzr. |
| ArmOpcode opcode = LIKELY(low_bits == 0) ? kA64Mov2rr : kA64Mvn2rr; |
| res = NewLIR2(opcode, r_dest.GetReg(), rwzr); |
| } else { |
| uint16_t uniform_bits, useful_bits; |
| int shift; |
| |
| if (LIKELY(high_fast)) { |
| shift = 0; |
| uniform_bits = high_bits; |
| useful_bits = low_bits; |
| } else { |
| shift = 1; |
| uniform_bits = low_bits; |
| useful_bits = high_bits; |
| } |
| |
| if (UNLIKELY(uniform_bits != 0)) { |
| res = NewLIR3(kA64Movn3rdM, r_dest.GetReg(), ~useful_bits, shift); |
| } else { |
| res = NewLIR3(kA64Movz3rdM, r_dest.GetReg(), useful_bits, shift); |
| } |
| } |
| } else { |
| // movk, movz require 2 instructions. Try detecting logical immediates. |
| int log_imm = EncodeLogicalImmediate(/*is_wide=*/false, value); |
| if (log_imm >= 0) { |
| res = NewLIR3(kA64Orr3Rrl, r_dest.GetReg(), rwzr, log_imm); |
| } else { |
| // Use 2 instructions. |
| res = NewLIR3(kA64Movz3rdM, r_dest.GetReg(), low_bits, 0); |
| NewLIR3(kA64Movk3rdM, r_dest.GetReg(), high_bits, 1); |
| } |
| } |
| |
| return res; |
| } |
| |
| // TODO: clean up the names. LoadConstantWide() should really be LoadConstantNoClobberWide(). |
| LIR* Arm64Mir2Lir::LoadConstantWide(RegStorage r_dest, int64_t value) { |
| // Maximum number of instructions to use for encoding the immediate. |
| const int max_num_ops = 2; |
| |
| if (r_dest.IsFloat()) { |
| return LoadFPConstantValueWide(r_dest, value); |
| } |
| |
| DCHECK(r_dest.Is64Bit()); |
| |
| // Loading SP/ZR with an immediate is not supported. |
| DCHECK(!A64_REG_IS_SP(r_dest.GetReg())); |
| DCHECK(!A64_REG_IS_ZR(r_dest.GetReg())); |
| |
| if (LIKELY(value == INT64_C(0) || value == INT64_C(-1))) { |
| // value is either 0 or -1: we can just use xzr. |
| ArmOpcode opcode = LIKELY(value == 0) ? WIDE(kA64Mov2rr) : WIDE(kA64Mvn2rr); |
| return NewLIR2(opcode, r_dest.GetReg(), rxzr); |
| } |
| |
| // At least one in value's halfwords is not 0x0, nor 0xffff: find out how many. |
| int num_0000_halfwords = 0; |
| int num_ffff_halfwords = 0; |
| uint64_t uvalue = static_cast<uint64_t>(value); |
| for (int shift = 0; shift < 64; shift += 16) { |
| uint16_t halfword = static_cast<uint16_t>(uvalue >> shift); |
| if (halfword == 0) |
| num_0000_halfwords++; |
| else if (halfword == UINT16_C(0xffff)) |
| num_ffff_halfwords++; |
| } |
| int num_fast_halfwords = std::max(num_0000_halfwords, num_ffff_halfwords); |
| |
| if (num_fast_halfwords < 3) { |
| // A single movz/movn is not enough. Try the logical immediate route. |
| int log_imm = EncodeLogicalImmediate(/*is_wide=*/true, value); |
| if (log_imm >= 0) { |
| return NewLIR3(WIDE(kA64Orr3Rrl), r_dest.GetReg(), rxzr, log_imm); |
| } |
| } |
| |
| if (num_fast_halfwords >= 4 - max_num_ops) { |
| // We can encode the number using a movz/movn followed by one or more movk. |
| ArmOpcode op; |
| uint16_t background; |
| LIR* res = nullptr; |
| |
| // Decide whether to use a movz or a movn. |
| if (num_0000_halfwords >= num_ffff_halfwords) { |
| op = WIDE(kA64Movz3rdM); |
| background = 0; |
| } else { |
| op = WIDE(kA64Movn3rdM); |
| background = 0xffff; |
| } |
| |
| // Emit the first instruction (movz, movn). |
| int shift; |
| for (shift = 0; shift < 4; shift++) { |
| uint16_t halfword = static_cast<uint16_t>(uvalue >> (shift << 4)); |
| if (halfword != background) { |
| res = NewLIR3(op, r_dest.GetReg(), halfword ^ background, shift); |
| break; |
| } |
| } |
| |
| // Emit the movk instructions. |
| for (shift++; shift < 4; shift++) { |
| uint16_t halfword = static_cast<uint16_t>(uvalue >> (shift << 4)); |
| if (halfword != background) { |
| NewLIR3(WIDE(kA64Movk3rdM), r_dest.GetReg(), halfword, shift); |
| } |
| } |
| return res; |
| } |
| |
| // Use the literal pool. |
| int32_t val_lo = Low32Bits(value); |
| int32_t val_hi = High32Bits(value); |
| LIR* data_target = ScanLiteralPoolWide(literal_list_, val_lo, val_hi); |
| if (data_target == NULL) { |
| data_target = AddWideData(&literal_list_, val_lo, val_hi); |
| } |
| |
| ScopedMemRefType mem_ref_type(this, ResourceMask::kLiteral); |
| LIR *res = RawLIR(current_dalvik_offset_, WIDE(kA64Ldr2rp), |
| r_dest.GetReg(), 0, 0, 0, 0, data_target); |
| AppendLIR(res); |
| return res; |
| } |
| |
| LIR* Arm64Mir2Lir::OpUnconditionalBranch(LIR* target) { |
| LIR* res = NewLIR1(kA64B1t, 0 /* offset to be patched during assembly */); |
| res->target = target; |
| return res; |
| } |
| |
| LIR* Arm64Mir2Lir::OpCondBranch(ConditionCode cc, LIR* target) { |
| LIR* branch = NewLIR2(kA64B2ct, ArmConditionEncoding(cc), |
| 0 /* offset to be patched */); |
| branch->target = target; |
| return branch; |
| } |
| |
| LIR* Arm64Mir2Lir::OpReg(OpKind op, RegStorage r_dest_src) { |
| ArmOpcode opcode = kA64Brk1d; |
| switch (op) { |
| case kOpBlx: |
| opcode = kA64Blr1x; |
| break; |
| // TODO(Arm64): port kThumbBx. |
| // case kOpBx: |
| // opcode = kThumbBx; |
| // break; |
| default: |
| LOG(FATAL) << "Bad opcode " << op; |
| } |
| return NewLIR1(opcode, r_dest_src.GetReg()); |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegRegShift(OpKind op, RegStorage r_dest_src1, RegStorage r_src2, int shift) { |
| ArmOpcode wide = (r_dest_src1.Is64Bit()) ? WIDE(0) : UNWIDE(0); |
| CHECK_EQ(r_dest_src1.Is64Bit(), r_src2.Is64Bit()); |
| ArmOpcode opcode = kA64Brk1d; |
| |
| switch (op) { |
| case kOpCmn: |
| opcode = kA64Cmn3rro; |
| break; |
| case kOpCmp: |
| opcode = kA64Cmp3rro; |
| break; |
| case kOpMov: |
| opcode = kA64Mov2rr; |
| break; |
| case kOpMvn: |
| opcode = kA64Mvn2rr; |
| break; |
| case kOpNeg: |
| opcode = kA64Neg3rro; |
| break; |
| case kOpTst: |
| opcode = kA64Tst3rro; |
| break; |
| case kOpRev: |
| DCHECK_EQ(shift, 0); |
| // Binary, but rm is encoded twice. |
| return NewLIR2(kA64Rev2rr | wide, r_dest_src1.GetReg(), r_src2.GetReg()); |
| break; |
| case kOpRevsh: |
| // Binary, but rm is encoded twice. |
| return NewLIR2(kA64Rev162rr | wide, r_dest_src1.GetReg(), r_src2.GetReg()); |
| break; |
| case kOp2Byte: |
| DCHECK_EQ(shift, ENCODE_NO_SHIFT); |
| // "sbfx r1, r2, #imm1, #imm2" is "sbfm r1, r2, #imm1, #(imm1 + imm2 - 1)". |
| // For now we use sbfm directly. |
| return NewLIR4(kA64Sbfm4rrdd | wide, r_dest_src1.GetReg(), r_src2.GetReg(), 0, 7); |
| case kOp2Short: |
| DCHECK_EQ(shift, ENCODE_NO_SHIFT); |
| // For now we use sbfm rather than its alias, sbfx. |
| return NewLIR4(kA64Sbfm4rrdd | wide, r_dest_src1.GetReg(), r_src2.GetReg(), 0, 15); |
| case kOp2Char: |
| // "ubfx r1, r2, #imm1, #imm2" is "ubfm r1, r2, #imm1, #(imm1 + imm2 - 1)". |
| // For now we use ubfm directly. |
| DCHECK_EQ(shift, ENCODE_NO_SHIFT); |
| return NewLIR4(kA64Ubfm4rrdd | wide, r_dest_src1.GetReg(), r_src2.GetReg(), 0, 15); |
| default: |
| return OpRegRegRegShift(op, r_dest_src1, r_dest_src1, r_src2, shift); |
| } |
| |
| DCHECK(!IsPseudoLirOp(opcode)); |
| if (EncodingMap[opcode].flags & IS_BINARY_OP) { |
| DCHECK_EQ(shift, ENCODE_NO_SHIFT); |
| return NewLIR2(opcode | wide, r_dest_src1.GetReg(), r_src2.GetReg()); |
| } else if (EncodingMap[opcode].flags & IS_TERTIARY_OP) { |
| ArmEncodingKind kind = EncodingMap[opcode].field_loc[2].kind; |
| if (kind == kFmtShift) { |
| return NewLIR3(opcode | wide, r_dest_src1.GetReg(), r_src2.GetReg(), shift); |
| } |
| } |
| |
| LOG(FATAL) << "Unexpected encoding operand count"; |
| return NULL; |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegRegExtend(OpKind op, RegStorage r_dest_src1, RegStorage r_src2, int extend) { |
| ArmOpcode wide = (r_dest_src1.Is64Bit()) ? WIDE(0) : UNWIDE(0); |
| ArmOpcode opcode = kA64Brk1d; |
| |
| switch (op) { |
| case kOpCmn: |
| opcode = kA64Cmn3Rre; |
| break; |
| case kOpCmp: |
| opcode = kA64Cmp3Rre; |
| break; |
| default: |
| LOG(FATAL) << "Bad Opcode: " << opcode; |
| break; |
| } |
| |
| DCHECK(!IsPseudoLirOp(opcode)); |
| if (EncodingMap[opcode].flags & IS_TERTIARY_OP) { |
| ArmEncodingKind kind = EncodingMap[opcode].field_loc[2].kind; |
| if (kind == kFmtExtend) { |
| return NewLIR3(opcode | wide, r_dest_src1.GetReg(), r_src2.GetReg(), extend); |
| } |
| } |
| |
| LOG(FATAL) << "Unexpected encoding operand count"; |
| return NULL; |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegReg(OpKind op, RegStorage r_dest_src1, RegStorage r_src2) { |
| /* RegReg operations with SP in first parameter need extended register instruction form. |
| * Only CMN and CMP instructions are implemented. |
| */ |
| if (r_dest_src1 == rs_sp) { |
| return OpRegRegExtend(op, r_dest_src1, r_src2, ENCODE_NO_EXTEND); |
| } else { |
| return OpRegRegShift(op, r_dest_src1, r_src2, ENCODE_NO_SHIFT); |
| } |
| } |
| |
| LIR* Arm64Mir2Lir::OpMovRegMem(RegStorage r_dest, RegStorage r_base, int offset, MoveType move_type) { |
| UNIMPLEMENTED(FATAL); |
| return nullptr; |
| } |
| |
| LIR* Arm64Mir2Lir::OpMovMemReg(RegStorage r_base, int offset, RegStorage r_src, MoveType move_type) { |
| UNIMPLEMENTED(FATAL); |
| return nullptr; |
| } |
| |
| LIR* Arm64Mir2Lir::OpCondRegReg(OpKind op, ConditionCode cc, RegStorage r_dest, RegStorage r_src) { |
| LOG(FATAL) << "Unexpected use of OpCondRegReg for Arm64"; |
| return NULL; |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegRegRegShift(OpKind op, RegStorage r_dest, RegStorage r_src1, |
| RegStorage r_src2, int shift) { |
| ArmOpcode opcode = kA64Brk1d; |
| |
| switch (op) { |
| case kOpAdd: |
| opcode = kA64Add4rrro; |
| break; |
| case kOpSub: |
| opcode = kA64Sub4rrro; |
| break; |
| // case kOpRsub: |
| // opcode = kA64RsubWWW; |
| // break; |
| case kOpAdc: |
| opcode = kA64Adc3rrr; |
| break; |
| case kOpAnd: |
| opcode = kA64And4rrro; |
| break; |
| case kOpXor: |
| opcode = kA64Eor4rrro; |
| break; |
| case kOpMul: |
| opcode = kA64Mul3rrr; |
| break; |
| case kOpDiv: |
| opcode = kA64Sdiv3rrr; |
| break; |
| case kOpOr: |
| opcode = kA64Orr4rrro; |
| break; |
| case kOpSbc: |
| opcode = kA64Sbc3rrr; |
| break; |
| case kOpLsl: |
| opcode = kA64Lsl3rrr; |
| break; |
| case kOpLsr: |
| opcode = kA64Lsr3rrr; |
| break; |
| case kOpAsr: |
| opcode = kA64Asr3rrr; |
| break; |
| case kOpRor: |
| opcode = kA64Ror3rrr; |
| break; |
| default: |
| LOG(FATAL) << "Bad opcode: " << op; |
| break; |
| } |
| |
| // The instructions above belong to two kinds: |
| // - 4-operands instructions, where the last operand is a shift/extend immediate, |
| // - 3-operands instructions with no shift/extend. |
| ArmOpcode widened_opcode = r_dest.Is64Bit() ? WIDE(opcode) : opcode; |
| CHECK_EQ(r_dest.Is64Bit(), r_src1.Is64Bit()); |
| CHECK_EQ(r_dest.Is64Bit(), r_src2.Is64Bit()); |
| if (EncodingMap[opcode].flags & IS_QUAD_OP) { |
| DCHECK(!IsExtendEncoding(shift)); |
| return NewLIR4(widened_opcode, r_dest.GetReg(), r_src1.GetReg(), r_src2.GetReg(), shift); |
| } else { |
| DCHECK(EncodingMap[opcode].flags & IS_TERTIARY_OP); |
| DCHECK_EQ(shift, ENCODE_NO_SHIFT); |
| return NewLIR3(widened_opcode, r_dest.GetReg(), r_src1.GetReg(), r_src2.GetReg()); |
| } |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegRegRegExtend(OpKind op, RegStorage r_dest, RegStorage r_src1, |
| RegStorage r_src2, A64RegExtEncodings ext, uint8_t amount) { |
| ArmOpcode opcode = kA64Brk1d; |
| |
| switch (op) { |
| case kOpAdd: |
| opcode = kA64Add4RRre; |
| break; |
| case kOpSub: |
| opcode = kA64Sub4RRre; |
| break; |
| default: |
| LOG(FATAL) << "Unimplemented opcode: " << op; |
| break; |
| } |
| ArmOpcode widened_opcode = r_dest.Is64Bit() ? WIDE(opcode) : opcode; |
| |
| if (r_dest.Is64Bit()) { |
| CHECK(r_src1.Is64Bit()); |
| |
| // dest determines whether the op is wide or not. Up-convert src2 when necessary. |
| // Note: this is not according to aarch64 specifications, but our encoding. |
| if (!r_src2.Is64Bit()) { |
| r_src2 = As64BitReg(r_src2); |
| } |
| } else { |
| CHECK(!r_src1.Is64Bit()); |
| CHECK(!r_src2.Is64Bit()); |
| } |
| |
| // Sanity checks. |
| // 1) Amount is in the range 0..4 |
| CHECK_LE(amount, 4); |
| |
| return NewLIR4(widened_opcode, r_dest.GetReg(), r_src1.GetReg(), r_src2.GetReg(), |
| EncodeExtend(ext, amount)); |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegRegReg(OpKind op, RegStorage r_dest, RegStorage r_src1, RegStorage r_src2) { |
| return OpRegRegRegShift(op, r_dest, r_src1, r_src2, ENCODE_NO_SHIFT); |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegRegImm(OpKind op, RegStorage r_dest, RegStorage r_src1, int value) { |
| return OpRegRegImm64(op, r_dest, r_src1, static_cast<int64_t>(value)); |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegRegImm64(OpKind op, RegStorage r_dest, RegStorage r_src1, int64_t value) { |
| LIR* res; |
| bool neg = (value < 0); |
| int64_t abs_value = (neg) ? -value : value; |
| ArmOpcode opcode = kA64Brk1d; |
| ArmOpcode alt_opcode = kA64Brk1d; |
| int32_t log_imm = -1; |
| bool is_wide = r_dest.Is64Bit(); |
| ArmOpcode wide = (is_wide) ? WIDE(0) : UNWIDE(0); |
| int info = 0; |
| |
| switch (op) { |
| case kOpLsl: { |
| // "lsl w1, w2, #imm" is an alias of "ubfm w1, w2, #(-imm MOD 32), #(31-imm)" |
| // and "lsl x1, x2, #imm" of "ubfm x1, x2, #(-imm MOD 64), #(63-imm)". |
| // For now, we just use ubfm directly. |
| int max_value = (is_wide) ? 63 : 31; |
| return NewLIR4(kA64Ubfm4rrdd | wide, r_dest.GetReg(), r_src1.GetReg(), |
| (-value) & max_value, max_value - value); |
| } |
| case kOpLsr: |
| return NewLIR3(kA64Lsr3rrd | wide, r_dest.GetReg(), r_src1.GetReg(), value); |
| case kOpAsr: |
| return NewLIR3(kA64Asr3rrd | wide, r_dest.GetReg(), r_src1.GetReg(), value); |
| case kOpRor: |
| // "ror r1, r2, #imm" is an alias of "extr r1, r2, r2, #imm". |
| // For now, we just use extr directly. |
| return NewLIR4(kA64Extr4rrrd | wide, r_dest.GetReg(), r_src1.GetReg(), r_src1.GetReg(), |
| value); |
| case kOpAdd: |
| neg = !neg; |
| // Note: intentional fallthrough |
| case kOpSub: |
| // Add and sub below read/write sp rather than xzr. |
| if (abs_value < 0x1000) { |
| opcode = (neg) ? kA64Add4RRdT : kA64Sub4RRdT; |
| return NewLIR4(opcode | wide, r_dest.GetReg(), r_src1.GetReg(), abs_value, 0); |
| } else if ((abs_value & UINT64_C(0xfff)) == 0 && ((abs_value >> 12) < 0x1000)) { |
| opcode = (neg) ? kA64Add4RRdT : kA64Sub4RRdT; |
| return NewLIR4(opcode | wide, r_dest.GetReg(), r_src1.GetReg(), abs_value >> 12, 1); |
| } else { |
| log_imm = -1; |
| alt_opcode = (op == kOpAdd) ? kA64Add4RRre : kA64Sub4RRre; |
| info = EncodeExtend(is_wide ? kA64Uxtx : kA64Uxtw, 0); |
| } |
| break; |
| // case kOpRsub: |
| // opcode = kThumb2RsubRRI8M; |
| // alt_opcode = kThumb2RsubRRR; |
| // break; |
| case kOpAdc: |
| log_imm = -1; |
| alt_opcode = kA64Adc3rrr; |
| break; |
| case kOpSbc: |
| log_imm = -1; |
| alt_opcode = kA64Sbc3rrr; |
| break; |
| case kOpOr: |
| log_imm = EncodeLogicalImmediate(is_wide, value); |
| opcode = kA64Orr3Rrl; |
| alt_opcode = kA64Orr4rrro; |
| break; |
| case kOpAnd: |
| log_imm = EncodeLogicalImmediate(is_wide, value); |
| opcode = kA64And3Rrl; |
| alt_opcode = kA64And4rrro; |
| break; |
| case kOpXor: |
| log_imm = EncodeLogicalImmediate(is_wide, value); |
| opcode = kA64Eor3Rrl; |
| alt_opcode = kA64Eor4rrro; |
| break; |
| case kOpMul: |
| // TUNING: power of 2, shift & add |
| log_imm = -1; |
| alt_opcode = kA64Mul3rrr; |
| break; |
| default: |
| LOG(FATAL) << "Bad opcode: " << op; |
| } |
| |
| if (log_imm >= 0) { |
| return NewLIR3(opcode | wide, r_dest.GetReg(), r_src1.GetReg(), log_imm); |
| } else { |
| RegStorage r_scratch; |
| if (is_wide) { |
| r_scratch = AllocTempWide(); |
| LoadConstantWide(r_scratch, value); |
| } else { |
| r_scratch = AllocTemp(); |
| LoadConstant(r_scratch, value); |
| } |
| if (EncodingMap[alt_opcode].flags & IS_QUAD_OP) |
| res = NewLIR4(alt_opcode | wide, r_dest.GetReg(), r_src1.GetReg(), r_scratch.GetReg(), info); |
| else |
| res = NewLIR3(alt_opcode | wide, r_dest.GetReg(), r_src1.GetReg(), r_scratch.GetReg()); |
| FreeTemp(r_scratch); |
| return res; |
| } |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegImm(OpKind op, RegStorage r_dest_src1, int value) { |
| return OpRegImm64(op, r_dest_src1, static_cast<int64_t>(value)); |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegImm64(OpKind op, RegStorage r_dest_src1, int64_t value) { |
| ArmOpcode wide = (r_dest_src1.Is64Bit()) ? WIDE(0) : UNWIDE(0); |
| ArmOpcode opcode = kA64Brk1d; |
| ArmOpcode neg_opcode = kA64Brk1d; |
| bool shift; |
| bool neg = (value < 0); |
| uint64_t abs_value = (neg) ? -value : value; |
| |
| if (LIKELY(abs_value < 0x1000)) { |
| // abs_value is a 12-bit immediate. |
| shift = false; |
| } else if ((abs_value & UINT64_C(0xfff)) == 0 && ((abs_value >> 12) < 0x1000)) { |
| // abs_value is a shifted 12-bit immediate. |
| shift = true; |
| abs_value >>= 12; |
| } else if (LIKELY(abs_value < 0x1000000 && (op == kOpAdd || op == kOpSub))) { |
| // Note: It is better to use two ADD/SUB instead of loading a number to a temp register. |
| // This works for both normal registers and SP. |
| // For a frame size == 0x2468, it will be encoded as: |
| // sub sp, #0x2000 |
| // sub sp, #0x468 |
| if (neg) { |
| op = (op == kOpAdd) ? kOpSub : kOpAdd; |
| } |
| OpRegImm64(op, r_dest_src1, abs_value & (~INT64_C(0xfff))); |
| return OpRegImm64(op, r_dest_src1, abs_value & 0xfff); |
| } else if (LIKELY(A64_REG_IS_SP(r_dest_src1.GetReg()) && (op == kOpAdd || op == kOpSub))) { |
| // Note: "sub sp, sp, Xm" is not correct on arm64. |
| // We need special instructions for SP. |
| // Also operation on 32-bit SP should be avoided. |
| DCHECK(IS_WIDE(wide)); |
| RegStorage r_tmp = AllocTempWide(); |
| OpRegRegImm(kOpAdd, r_tmp, r_dest_src1, 0); |
| OpRegImm64(op, r_tmp, value); |
| return OpRegRegImm(kOpAdd, r_dest_src1, r_tmp, 0); |
| } else { |
| RegStorage r_tmp; |
| LIR* res; |
| if (IS_WIDE(wide)) { |
| r_tmp = AllocTempWide(); |
| res = LoadConstantWide(r_tmp, value); |
| } else { |
| r_tmp = AllocTemp(); |
| res = LoadConstant(r_tmp, value); |
| } |
| OpRegReg(op, r_dest_src1, r_tmp); |
| FreeTemp(r_tmp); |
| return res; |
| } |
| |
| switch (op) { |
| case kOpAdd: |
| neg_opcode = kA64Sub4RRdT; |
| opcode = kA64Add4RRdT; |
| break; |
| case kOpSub: |
| neg_opcode = kA64Add4RRdT; |
| opcode = kA64Sub4RRdT; |
| break; |
| case kOpCmp: |
| neg_opcode = kA64Cmn3RdT; |
| opcode = kA64Cmp3RdT; |
| break; |
| default: |
| LOG(FATAL) << "Bad op-kind in OpRegImm: " << op; |
| break; |
| } |
| |
| if (UNLIKELY(neg)) |
| opcode = neg_opcode; |
| |
| if (EncodingMap[opcode].flags & IS_QUAD_OP) |
| return NewLIR4(opcode | wide, r_dest_src1.GetReg(), r_dest_src1.GetReg(), abs_value, |
| (shift) ? 1 : 0); |
| else |
| return NewLIR3(opcode | wide, r_dest_src1.GetReg(), abs_value, (shift) ? 1 : 0); |
| } |
| |
| int Arm64Mir2Lir::EncodeShift(int shift_type, int amount) { |
| return ((shift_type & 0x3) << 7) | (amount & 0x3f); |
| } |
| |
| int Arm64Mir2Lir::EncodeExtend(int extend_type, int amount) { |
| return (1 << 6) | ((extend_type & 0x7) << 3) | (amount & 0x7); |
| } |
| |
| bool Arm64Mir2Lir::IsExtendEncoding(int encoded_value) { |
| return ((1 << 6) & encoded_value) != 0; |
| } |
| |
| LIR* Arm64Mir2Lir::LoadBaseIndexed(RegStorage r_base, RegStorage r_index, RegStorage r_dest, |
| int scale, OpSize size) { |
| LIR* load; |
| int expected_scale = 0; |
| ArmOpcode opcode = kA64Brk1d; |
| r_base = Check64BitReg(r_base); |
| r_index = Check64BitReg(r_index); |
| |
| if (r_dest.IsFloat()) { |
| if (r_dest.IsDouble()) { |
| DCHECK(size == k64 || size == kDouble); |
| expected_scale = 3; |
| opcode = FWIDE(kA64Ldr4fXxG); |
| } else { |
| DCHECK(r_dest.IsSingle()); |
| DCHECK(size == k32 || size == kSingle); |
| expected_scale = 2; |
| opcode = kA64Ldr4fXxG; |
| } |
| |
| DCHECK(scale == 0 || scale == expected_scale); |
| return NewLIR4(opcode, r_dest.GetReg(), r_base.GetReg(), r_index.GetReg(), |
| (scale != 0) ? 1 : 0); |
| } |
| |
| switch (size) { |
| case kDouble: |
| case kWord: |
| case k64: |
| r_dest = Check64BitReg(r_dest); |
| opcode = WIDE(kA64Ldr4rXxG); |
| expected_scale = 3; |
| break; |
| case kSingle: |
| case k32: |
| case kReference: |
| r_dest = Check32BitReg(r_dest); |
| opcode = kA64Ldr4rXxG; |
| expected_scale = 2; |
| break; |
| case kUnsignedHalf: |
| r_dest = Check32BitReg(r_dest); |
| opcode = kA64Ldrh4wXxd; |
| expected_scale = 1; |
| break; |
| case kSignedHalf: |
| r_dest = Check32BitReg(r_dest); |
| opcode = kA64Ldrsh4rXxd; |
| expected_scale = 1; |
| break; |
| case kUnsignedByte: |
| r_dest = Check32BitReg(r_dest); |
| opcode = kA64Ldrb3wXx; |
| break; |
| case kSignedByte: |
| r_dest = Check32BitReg(r_dest); |
| opcode = kA64Ldrsb3rXx; |
| break; |
| default: |
| LOG(FATAL) << "Bad size: " << size; |
| } |
| |
| if (UNLIKELY(expected_scale == 0)) { |
| // This is a tertiary op (e.g. ldrb, ldrsb), it does not not support scale. |
| DCHECK_NE(EncodingMap[UNWIDE(opcode)].flags & IS_TERTIARY_OP, 0U); |
| DCHECK_EQ(scale, 0); |
| load = NewLIR3(opcode, r_dest.GetReg(), r_base.GetReg(), r_index.GetReg()); |
| } else { |
| DCHECK(scale == 0 || scale == expected_scale); |
| load = NewLIR4(opcode, r_dest.GetReg(), r_base.GetReg(), r_index.GetReg(), |
| (scale != 0) ? 1 : 0); |
| } |
| |
| return load; |
| } |
| |
| LIR* Arm64Mir2Lir::LoadRefIndexed(RegStorage r_base, RegStorage r_index, RegStorage r_dest) { |
| return LoadBaseIndexed(r_base, r_index, As32BitReg(r_dest), 2, kReference); |
| } |
| |
| LIR* Arm64Mir2Lir::StoreBaseIndexed(RegStorage r_base, RegStorage r_index, RegStorage r_src, |
| int scale, OpSize size) { |
| LIR* store; |
| int expected_scale = 0; |
| ArmOpcode opcode = kA64Brk1d; |
| r_base = Check64BitReg(r_base); |
| r_index = Check64BitReg(r_index); |
| |
| if (r_src.IsFloat()) { |
| if (r_src.IsDouble()) { |
| DCHECK(size == k64 || size == kDouble); |
| expected_scale = 3; |
| opcode = FWIDE(kA64Str4fXxG); |
| } else { |
| DCHECK(r_src.IsSingle()); |
| DCHECK(size == k32 || size == kSingle); |
| expected_scale = 2; |
| opcode = kA64Str4fXxG; |
| } |
| |
| DCHECK(scale == 0 || scale == expected_scale); |
| return NewLIR4(opcode, r_src.GetReg(), r_base.GetReg(), r_index.GetReg(), |
| (scale != 0) ? 1 : 0); |
| } |
| |
| switch (size) { |
| case kDouble: // Intentional fall-trough. |
| case kWord: // Intentional fall-trough. |
| case k64: |
| r_src = Check64BitReg(r_src); |
| opcode = WIDE(kA64Str4rXxG); |
| expected_scale = 3; |
| break; |
| case kSingle: // Intentional fall-trough. |
| case k32: // Intentional fall-trough. |
| case kReference: |
| r_src = Check32BitReg(r_src); |
| opcode = kA64Str4rXxG; |
| expected_scale = 2; |
| break; |
| case kUnsignedHalf: |
| case kSignedHalf: |
| r_src = Check32BitReg(r_src); |
| opcode = kA64Strh4wXxd; |
| expected_scale = 1; |
| break; |
| case kUnsignedByte: |
| case kSignedByte: |
| r_src = Check32BitReg(r_src); |
| opcode = kA64Strb3wXx; |
| break; |
| default: |
| LOG(FATAL) << "Bad size: " << size; |
| } |
| |
| if (UNLIKELY(expected_scale == 0)) { |
| // This is a tertiary op (e.g. strb), it does not not support scale. |
| DCHECK_NE(EncodingMap[UNWIDE(opcode)].flags & IS_TERTIARY_OP, 0U); |
| DCHECK_EQ(scale, 0); |
| store = NewLIR3(opcode, r_src.GetReg(), r_base.GetReg(), r_index.GetReg()); |
| } else { |
| store = NewLIR4(opcode, r_src.GetReg(), r_base.GetReg(), r_index.GetReg(), |
| (scale != 0) ? 1 : 0); |
| } |
| |
| return store; |
| } |
| |
| LIR* Arm64Mir2Lir::StoreRefIndexed(RegStorage r_base, RegStorage r_index, RegStorage r_src) { |
| return StoreBaseIndexed(r_base, r_index, As32BitReg(r_src), 2, kReference); |
| } |
| |
| /* |
| * Load value from base + displacement. Optionally perform null check |
| * on base (which must have an associated s_reg and MIR). If not |
| * performing null check, incoming MIR can be null. |
| */ |
| LIR* Arm64Mir2Lir::LoadBaseDispBody(RegStorage r_base, int displacement, RegStorage r_dest, |
| OpSize size) { |
| LIR* load = NULL; |
| ArmOpcode opcode = kA64Brk1d; |
| ArmOpcode alt_opcode = kA64Brk1d; |
| int scale = 0; |
| |
| switch (size) { |
| case kDouble: // Intentional fall-through. |
| case kWord: // Intentional fall-through. |
| case k64: |
| r_dest = Check64BitReg(r_dest); |
| scale = 3; |
| if (r_dest.IsFloat()) { |
| DCHECK(r_dest.IsDouble()); |
| opcode = FWIDE(kA64Ldr3fXD); |
| alt_opcode = FWIDE(kA64Ldur3fXd); |
| } else { |
| opcode = WIDE(kA64Ldr3rXD); |
| alt_opcode = WIDE(kA64Ldur3rXd); |
| } |
| break; |
| case kSingle: // Intentional fall-through. |
| case k32: // Intentional fall-trough. |
| case kReference: |
| r_dest = Check32BitReg(r_dest); |
| scale = 2; |
| if (r_dest.IsFloat()) { |
| DCHECK(r_dest.IsSingle()); |
| opcode = kA64Ldr3fXD; |
| } else { |
| opcode = kA64Ldr3rXD; |
| } |
| break; |
| case kUnsignedHalf: |
| scale = 1; |
| opcode = kA64Ldrh3wXF; |
| break; |
| case kSignedHalf: |
| scale = 1; |
| opcode = kA64Ldrsh3rXF; |
| break; |
| case kUnsignedByte: |
| opcode = kA64Ldrb3wXd; |
| break; |
| case kSignedByte: |
| opcode = kA64Ldrsb3rXd; |
| break; |
| default: |
| LOG(FATAL) << "Bad size: " << size; |
| } |
| |
| bool displacement_is_aligned = (displacement & ((1 << scale) - 1)) == 0; |
| int scaled_disp = displacement >> scale; |
| if (displacement_is_aligned && scaled_disp >= 0 && scaled_disp < 4096) { |
| // Can use scaled load. |
| load = NewLIR3(opcode, r_dest.GetReg(), r_base.GetReg(), scaled_disp); |
| } else if (alt_opcode != kA64Brk1d && IS_SIGNED_IMM9(displacement)) { |
| // Can use unscaled load. |
| load = NewLIR3(alt_opcode, r_dest.GetReg(), r_base.GetReg(), displacement); |
| } else { |
| // Use long sequence. |
| // TODO: cleaner support for index/displacement registers? Not a reference, but must match width. |
| RegStorage r_scratch = AllocTempWide(); |
| LoadConstantWide(r_scratch, displacement); |
| load = LoadBaseIndexed(r_base, r_scratch, r_dest, 0, size); |
| FreeTemp(r_scratch); |
| } |
| |
| // TODO: in future may need to differentiate Dalvik accesses w/ spills |
| if (mem_ref_type_ == ResourceMask::kDalvikReg) { |
| DCHECK(r_base == rs_sp); |
| AnnotateDalvikRegAccess(load, displacement >> 2, true /* is_load */, r_dest.Is64Bit()); |
| } |
| return load; |
| } |
| |
| LIR* Arm64Mir2Lir::LoadBaseDisp(RegStorage r_base, int displacement, RegStorage r_dest, |
| OpSize size, VolatileKind is_volatile) { |
| // LoadBaseDisp() will emit correct insn for atomic load on arm64 |
| // assuming r_dest is correctly prepared using RegClassForFieldLoadStore(). |
| |
| LIR* load = LoadBaseDispBody(r_base, displacement, r_dest, size); |
| |
| if (UNLIKELY(is_volatile == kVolatile)) { |
| // Without context sensitive analysis, we must issue the most conservative barriers. |
| // In this case, either a load or store may follow so we issue both barriers. |
| GenMemBarrier(kLoadLoad); |
| GenMemBarrier(kLoadStore); |
| } |
| |
| return load; |
| } |
| |
| LIR* Arm64Mir2Lir::LoadRefDisp(RegStorage r_base, int displacement, RegStorage r_dest, |
| VolatileKind is_volatile) { |
| return LoadBaseDisp(r_base, displacement, As32BitReg(r_dest), kReference, is_volatile); |
| } |
| |
| LIR* Arm64Mir2Lir::StoreBaseDispBody(RegStorage r_base, int displacement, RegStorage r_src, |
| OpSize size) { |
| LIR* store = NULL; |
| ArmOpcode opcode = kA64Brk1d; |
| ArmOpcode alt_opcode = kA64Brk1d; |
| int scale = 0; |
| |
| switch (size) { |
| case kDouble: // Intentional fall-through. |
| case kWord: // Intentional fall-through. |
| case k64: |
| r_src = Check64BitReg(r_src); |
| scale = 3; |
| if (r_src.IsFloat()) { |
| DCHECK(r_src.IsDouble()); |
| opcode = FWIDE(kA64Str3fXD); |
| alt_opcode = FWIDE(kA64Stur3fXd); |
| } else { |
| opcode = FWIDE(kA64Str3rXD); |
| alt_opcode = FWIDE(kA64Stur3rXd); |
| } |
| break; |
| case kSingle: // Intentional fall-through. |
| case k32: // Intentional fall-trough. |
| case kReference: |
| r_src = Check32BitReg(r_src); |
| scale = 2; |
| if (r_src.IsFloat()) { |
| DCHECK(r_src.IsSingle()); |
| opcode = kA64Str3fXD; |
| } else { |
| opcode = kA64Str3rXD; |
| } |
| break; |
| case kUnsignedHalf: |
| case kSignedHalf: |
| scale = 1; |
| opcode = kA64Strh3wXF; |
| break; |
| case kUnsignedByte: |
| case kSignedByte: |
| opcode = kA64Strb3wXd; |
| break; |
| default: |
| LOG(FATAL) << "Bad size: " << size; |
| } |
| |
| bool displacement_is_aligned = (displacement & ((1 << scale) - 1)) == 0; |
| int scaled_disp = displacement >> scale; |
| if (displacement_is_aligned && scaled_disp >= 0 && scaled_disp < 4096) { |
| // Can use scaled store. |
| store = NewLIR3(opcode, r_src.GetReg(), r_base.GetReg(), scaled_disp); |
| } else if (alt_opcode != kA64Brk1d && IS_SIGNED_IMM9(displacement)) { |
| // Can use unscaled store. |
| store = NewLIR3(alt_opcode, r_src.GetReg(), r_base.GetReg(), displacement); |
| } else { |
| // Use long sequence. |
| RegStorage r_scratch = AllocTempWide(); |
| LoadConstantWide(r_scratch, displacement); |
| store = StoreBaseIndexed(r_base, r_scratch, r_src, 0, size); |
| FreeTemp(r_scratch); |
| } |
| |
| // TODO: In future, may need to differentiate Dalvik & spill accesses. |
| if (mem_ref_type_ == ResourceMask::kDalvikReg) { |
| DCHECK(r_base == rs_sp); |
| AnnotateDalvikRegAccess(store, displacement >> 2, false /* is_load */, r_src.Is64Bit()); |
| } |
| return store; |
| } |
| |
| LIR* Arm64Mir2Lir::StoreBaseDisp(RegStorage r_base, int displacement, RegStorage r_src, |
| OpSize size, VolatileKind is_volatile) { |
| if (UNLIKELY(is_volatile == kVolatile)) { |
| // There might have been a store before this volatile one so insert StoreStore barrier. |
| GenMemBarrier(kStoreStore); |
| } |
| |
| // StoreBaseDisp() will emit correct insn for atomic store on arm64 |
| // assuming r_dest is correctly prepared using RegClassForFieldLoadStore(). |
| |
| LIR* store = StoreBaseDispBody(r_base, displacement, r_src, size); |
| |
| if (UNLIKELY(is_volatile == kVolatile)) { |
| // A load might follow the volatile store so insert a StoreLoad barrier. |
| GenMemBarrier(kStoreLoad); |
| } |
| |
| return store; |
| } |
| |
| LIR* Arm64Mir2Lir::StoreRefDisp(RegStorage r_base, int displacement, RegStorage r_src, |
| VolatileKind is_volatile) { |
| return StoreBaseDisp(r_base, displacement, As32BitReg(r_src), kReference, is_volatile); |
| } |
| |
| LIR* Arm64Mir2Lir::OpFpRegCopy(RegStorage r_dest, RegStorage r_src) { |
| LOG(FATAL) << "Unexpected use of OpFpRegCopy for Arm64"; |
| return NULL; |
| } |
| |
| LIR* Arm64Mir2Lir::OpThreadMem(OpKind op, ThreadOffset<4> thread_offset) { |
| UNIMPLEMENTED(FATAL) << "Should not be used."; |
| return nullptr; |
| } |
| |
| LIR* Arm64Mir2Lir::OpThreadMem(OpKind op, ThreadOffset<8> thread_offset) { |
| LOG(FATAL) << "Unexpected use of OpThreadMem for Arm64"; |
| return NULL; |
| } |
| |
| LIR* Arm64Mir2Lir::OpMem(OpKind op, RegStorage r_base, int disp) { |
| LOG(FATAL) << "Unexpected use of OpMem for Arm64"; |
| return NULL; |
| } |
| |
| LIR* Arm64Mir2Lir::StoreBaseIndexedDisp(RegStorage r_base, RegStorage r_index, int scale, |
| int displacement, RegStorage r_src, OpSize size) { |
| LOG(FATAL) << "Unexpected use of StoreBaseIndexedDisp for Arm64"; |
| return NULL; |
| } |
| |
| LIR* Arm64Mir2Lir::OpRegMem(OpKind op, RegStorage r_dest, RegStorage r_base, int offset) { |
| LOG(FATAL) << "Unexpected use of OpRegMem for Arm64"; |
| return NULL; |
| } |
| |
| LIR* Arm64Mir2Lir::LoadBaseIndexedDisp(RegStorage r_base, RegStorage r_index, int scale, |
| int displacement, RegStorage r_dest, OpSize size) { |
| LOG(FATAL) << "Unexpected use of LoadBaseIndexedDisp for Arm64"; |
| return NULL; |
| } |
| |
| } // namespace art |