| # |
| # Copyright (C) 2011 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| ifndef ANDROID_COMMON_TEST_MK |
| ANDROID_COMMON_TEST_MK = true |
| |
| include art/build/Android.common_path.mk |
| |
| # We need to set a define for the nativetest dir so that common_runtime_test will know the right |
| # path. (The problem is being a 32b test on 64b device, which is still located in nativetest64). |
| ART_TARGET_CFLAGS += -DART_TARGET_NATIVETEST_DIR=${ART_TARGET_NATIVETEST_DIR} |
| |
| # List of known broken tests that we won't attempt to execute. The test name must be the full |
| # rule name such as test-art-host-oat-optimizing-HelloWorld64. |
| ART_TEST_KNOWN_BROKEN := \ |
| test-art-host-run-test-gcstress-optimizing-no-prebuild-004-SignalTest32 \ |
| test-art-host-run-test-gcstress-optimizing-prebuild-004-SignalTest32 \ |
| test-art-host-run-test-gcstress-optimizing-norelocate-004-SignalTest32 \ |
| test-art-host-run-test-gcstress-optimizing-relocate-004-SignalTest32 \ |
| test-art-host-run-test-gcverify-optimizing-no-prebuild-004-SignalTest32 \ |
| test-art-host-run-test-gcverify-optimizing-prebuild-004-SignalTest32 \ |
| test-art-host-run-test-gcverify-optimizing-norelocate-004-SignalTest32 \ |
| test-art-host-run-test-gcverify-optimizing-relocate-004-SignalTest32 \ |
| test-art-host-run-test-optimizing-no-prebuild-004-SignalTest32 \ |
| test-art-host-run-test-optimizing-prebuild-004-SignalTest32 \ |
| test-art-host-run-test-optimizing-norelocate-004-SignalTest32 \ |
| test-art-host-run-test-optimizing-relocate-004-SignalTest32 \ |
| test-art-target-run-test-gcstress-optimizing-prebuild-004-SignalTest32 \ |
| test-art-target-run-test-gcstress-optimizing-norelocate-004-SignalTest32 \ |
| test-art-target-run-test-gcstress-default-prebuild-004-SignalTest32 \ |
| test-art-target-run-test-gcstress-default-norelocate-004-SignalTest32 \ |
| test-art-target-run-test-gcstress-optimizing-relocate-004-SignalTest32 \ |
| test-art-target-run-test-gcstress-default-relocate-004-SignalTest32 \ |
| test-art-target-run-test-gcstress-optimizing-no-prebuild-004-SignalTest32 \ |
| test-art-target-run-test-gcstress-default-no-prebuild-004-SignalTest32 |
| |
| # List of known failing tests that when executed won't cause test execution to not finish. |
| # The test name must be the full rule name such as test-art-host-oat-optimizing-HelloWorld64. |
| ART_TEST_KNOWN_FAILING := |
| |
| # Keep going after encountering a test failure? |
| ART_TEST_KEEP_GOING ?= true |
| |
| # Do you want all tests, even those that are time consuming? |
| ART_TEST_FULL ?= true |
| |
| # Do you want optimizing compiler tests run? |
| ART_TEST_OPTIMIZING ?= $(ART_TEST_FULL) |
| |
| # Do you want tracing tests run? |
| ART_TEST_TRACE ?= $(ART_TEST_FULL) |
| |
| # Do you want tests with GC verification enabled run? |
| ART_TEST_GC_VERIFY ?= $(ART_TEST_FULL) |
| |
| # Do you want tests with the GC stress mode enabled run? |
| ART_TEST_GC_STRESS ?= $(ART_TEST_FULL) |
| |
| # Do you want run-tests with relocation enabled? |
| ART_TEST_RUN_TEST_RELOCATE ?= $(ART_TEST_FULL) |
| |
| # Do you want run-tests with relocation disabled? |
| ART_TEST_RUN_TEST_NO_RELOCATE ?= $(ART_TEST_FULL) |
| |
| # Do you want run-tests with prebuild disabled? |
| ART_TEST_RUN_TEST_NO_PREBUILD ?= $(ART_TEST_FULL) |
| |
| # Define the command run on test failure. $(1) is the name of the test. Executed by the shell. |
| define ART_TEST_FAILED |
| ( [ -f $(ART_HOST_TEST_DIR)/skipped/$(1) ] || \ |
| (mkdir -p $(ART_HOST_TEST_DIR)/failed/ && touch $(ART_HOST_TEST_DIR)/failed/$(1) && \ |
| echo $(ART_TEST_KNOWN_FAILING) | grep -q $(1) \ |
| && (echo -e "$(1) \e[91mKNOWN FAILURE\e[0m") \ |
| || (echo -e "$(1) \e[91mFAILED\e[0m" >&2 ))) |
| endef |
| |
| # Define the command run on test success. $(1) is the name of the test. Executed by the shell. |
| # The command checks prints "PASSED" then checks to see if this was a top-level make target (e.g. |
| # "mm test-art-host-oat-HelloWorld32"), if it was then it does nothing, otherwise it creates a file |
| # to be printed in the passing test summary. |
| define ART_TEST_PASSED |
| ( echo -e "$(1) \e[92mPASSED\e[0m" && \ |
| (echo $(MAKECMDGOALS) | grep -q $(1) || \ |
| (mkdir -p $(ART_HOST_TEST_DIR)/passed/ && touch $(ART_HOST_TEST_DIR)/passed/$(1)))) |
| endef |
| |
| # Define the command run on test success of multiple prerequisites. $(1) is the name of the test. |
| # When the test is a top-level make target then a summary of the ran tests is produced. Executed by |
| # the shell. |
| define ART_TEST_PREREQ_FINISHED |
| (echo -e "$(1) \e[32mCOMPLETE\e[0m" && \ |
| (echo $(MAKECMDGOALS) | grep -q -v $(1) || \ |
| (([ -d $(ART_HOST_TEST_DIR)/passed/ ] \ |
| && (echo -e "\e[92mPASSING TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/passed/) \ |
| || (echo -e "\e[91mNO TESTS PASSED\e[0m")) && \ |
| ([ -d $(ART_HOST_TEST_DIR)/skipped/ ] \ |
| && (echo -e "\e[93mSKIPPED TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/skipped/) \ |
| || (echo -e "\e[92mNO TESTS SKIPPED\e[0m")) && \ |
| ([ -d $(ART_HOST_TEST_DIR)/failed/ ] \ |
| && (echo -e "\e[91mFAILING TESTS\e[0m" >&2 && ls -1 $(ART_HOST_TEST_DIR)/failed/ >&2) \ |
| || (echo -e "\e[92mNO TESTS FAILED\e[0m")) \ |
| && ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] && rm -r $(ART_HOST_TEST_DIR) \ |
| || (rm -r $(ART_HOST_TEST_DIR) && false))))) |
| endef |
| |
| # Define the command executed by the shell ahead of running an art test. $(1) is the name of the |
| # test. |
| define ART_TEST_SKIP |
| ((echo $(ART_TEST_KNOWN_BROKEN) | grep -q -v $(1) \ |
| && ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] || [ $(ART_TEST_KEEP_GOING) = true ])\ |
| && echo -e "$(1) \e[95mRUNNING\e[0m") \ |
| || ((mkdir -p $(ART_HOST_TEST_DIR)/skipped/ && touch $(ART_HOST_TEST_DIR)/skipped/$(1) \ |
| && ([ -d $(ART_HOST_TEST_DIR)/failed/ ] \ |
| && echo -e "$(1) \e[93mSKIPPING DUE TO EARLIER FAILURE\e[0m") \ |
| || echo -e "$(1) \e[93mSKIPPING BROKEN TEST\e[0m") && false)) |
| endef |
| |
| # Create a build rule to create the dex file for a test. |
| # $(1): module prefix, e.g. art-test-dex |
| # $(2): input test directory in art/test, e.g. HelloWorld |
| # $(3): target output module path (default module path is used on host) |
| # $(4): additional dependencies |
| # $(5): a make variable used to collate target dependencies, e.g ART_TEST_TARGET_OAT_HelloWorld_DEX |
| # $(6): a make variable used to collate host dependencies, e.g ART_TEST_HOST_OAT_HelloWorld_DEX |
| define build-art-test-dex |
| ifeq ($(ART_BUILD_TARGET),true) |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := $(1)-$(2) |
| LOCAL_SRC_FILES := $(call all-java-files-under, $(2)) |
| LOCAL_NO_STANDARD_LIBRARIES := true |
| LOCAL_DEX_PREOPT := false |
| LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4) |
| LOCAL_MODULE_TAGS := tests |
| LOCAL_JAVA_LIBRARIES := $(TARGET_CORE_JARS) |
| LOCAL_MODULE_PATH := $(3) |
| LOCAL_DEX_PREOPT_IMAGE_LOCATION := $(TARGET_CORE_IMG_OUT) |
| include $(BUILD_JAVA_LIBRARY) |
| $(5) := $$(LOCAL_INSTALLED_MODULE) |
| endif |
| ifeq ($(ART_BUILD_HOST),true) |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := $(1)-$(2) |
| LOCAL_SRC_FILES := $(call all-java-files-under, $(2)) |
| LOCAL_NO_STANDARD_LIBRARIES := true |
| LOCAL_DEX_PREOPT := false |
| LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4) |
| LOCAL_JAVA_LIBRARIES := $(HOST_CORE_JARS) |
| LOCAL_DEX_PREOPT_IMAGE := $(HOST_CORE_IMG_LOCATION) |
| include $(BUILD_HOST_DALVIK_JAVA_LIBRARY) |
| $(6) := $$(LOCAL_INSTALLED_MODULE) |
| endif |
| endef |
| |
| endif # ANDROID_COMMON_TEST_MK |