| #!/bin/bash |
| # |
| # Copyright (C) 2007 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Set up prog to be the path of this script, including following symlinks, |
| # and set up progdir to be the fully-qualified pathname of its directory. |
| prog="$0" |
| while [ -h "${prog}" ]; do |
| newProg=`/bin/ls -ld "${prog}"` |
| newProg=`expr "${newProg}" : ".* -> \(.*\)$"` |
| if expr "x${newProg}" : 'x/' >/dev/null; then |
| prog="${newProg}" |
| else |
| progdir=`dirname "${prog}"` |
| prog="${progdir}/${newProg}" |
| fi |
| done |
| oldwd=`pwd` |
| progdir=`dirname "${prog}"` |
| cd "${progdir}" |
| progdir=`pwd` |
| prog="${progdir}"/`basename "${prog}"` |
| |
| run_args="" |
| usage="no" |
| sequental="no" |
| |
| while true; do |
| if [ "x$1" = "x--host" ]; then |
| run_args="${run_args} --host" |
| shift |
| elif [ "x$1" = "x--use-java-home" ]; then |
| run_args="${run_args} --use-java-home" |
| shift |
| elif [ "x$1" = "x--no-image" ]; then |
| run_args="${run_args} --no-image" |
| shift |
| elif [ "x$1" = "x--optimizing" ]; then |
| run_args="${run_args} --optimizing" |
| shift |
| elif [ "x$1" = "x--image" ]; then |
| run_args="${run_args} --image" |
| shift |
| elif [ "x$1" = "x--never-clean" ]; then |
| run_args="${run_args} --never-clean" |
| shift |
| elif [ "x$1" = "x--jvm" ]; then |
| run_args="${run_args} --jvm" |
| shift |
| elif [ "x$1" = "x--debug" ]; then |
| run_args="${run_args} --debug" |
| shift |
| elif [ "x$1" = "x--build-only" ]; then |
| run_args="${run_args} --build-only" |
| shift |
| elif [ "x$1" = "x--build-with-jack" ]; then |
| run_args="${run_args} --build-with-jack" |
| shift |
| elif [ "x$1" = "x--build-with-javac-dx" ]; then |
| run_args="${run_args} --build-with-javac-dx" |
| shift |
| elif [ "x$1" = "x--dex2oat-swap" ]; then |
| run_args="${run_args} --dex2oat-swap" |
| shift |
| elif [ "x$1" = "x--dalvik" ]; then |
| run_args="${run_args} --dalvik" |
| shift |
| elif [ "x$1" = "x--debuggable" ]; then |
| run_args="${run_args} --debuggable" |
| shift |
| elif [ "x$1" = "x--zygote" ]; then |
| run_args="${run_args} --zygote" |
| shift |
| elif [ "x$1" = "x--interpreter" ]; then |
| run_args="${run_args} --interpreter" |
| shift |
| elif [ "x$1" = "x--jit" ]; then |
| run_args="${run_args} --jit" |
| shift |
| elif [ "x$1" = "x--verify-soft-fail" ]; then |
| run_args="${run_args} --verify-soft-fail" |
| shift |
| elif [ "x$1" = "x--no-verify" ]; then |
| run_args="${run_args} --no-verify" |
| shift |
| elif [ "x$1" = "x--no-optimize" ]; then |
| run_args="${run_args} --no-optimize" |
| shift |
| elif [ "x$1" = "x--dev" ]; then |
| run_args="${run_args} --dev" |
| shift |
| elif [ "x$1" = "x--update" ]; then |
| run_args="${run_args} --update" |
| shift |
| elif [ "x$1" = "x--help" ]; then |
| usage="yes" |
| shift |
| elif [ "x$1" = "x--seq" ]; then |
| sequental="yes" |
| shift |
| elif [ "x$1" = "x-O" ]; then |
| run_args="${run_args} -O" |
| shift |
| elif [ "x$1" = "x--64" ]; then |
| run_args="${run_args} --64" |
| shift |
| elif [ "x$1" = "x--gcstress" ]; then |
| run_args="${run_args} --gcstress" |
| shift |
| elif [ "x$1" = "x--gcverify" ]; then |
| run_args="${run_args} --gcverify" |
| shift |
| elif [ "x$1" = "x--trace" ]; then |
| run_args="${run_args} --trace" |
| shift |
| elif [ "x$1" = "x--relocate" ]; then |
| run_args="${run_args} --relocate" |
| shift |
| elif [ "x$1" = "x--no-relocate" ]; then |
| run_args="${run_args} --no-relocate" |
| shift |
| elif [ "x$1" = "x--no-prebuild" ]; then |
| run_args="${run_args} --no-prebuild" |
| shift; |
| elif [ "x$1" = "x--prebuild" ]; then |
| run_args="${run_args} --prebuild" |
| shift; |
| elif [ "x$1" = "x--no-dex2oat" ]; then |
| run_args="${run_args} --no-dex2oat" |
| shift; |
| elif [ "x$1" = "x--no-patchoat" ]; then |
| run_args="${run_args} --no-patchoat" |
| shift; |
| elif [ "x$1" = "x--always-clean" ]; then |
| run_args="${run_args} --always-clean" |
| shift |
| elif [ "x$1" = "x--pic-test" ]; then |
| run_args="${run_args} --pic-test" |
| shift |
| elif [ "x$1" = "x--pic-image" ]; then |
| run_args="${run_args} --pic-image" |
| shift |
| elif [ "x$1" = "x--strace" ]; then |
| run_args="${run_args} --strace" |
| shift |
| elif [ "x$1" = "x--random-profile" ]; then |
| run_args="${run_args} --random-profile" |
| shift |
| elif expr "x$1" : "x--" >/dev/null 2>&1; then |
| echo "unknown $0 option: $1" 1>&2 |
| usage="yes" |
| break |
| else |
| break |
| fi |
| done |
| |
| if [ "$usage" = "yes" ]; then |
| prog=`basename $prog` |
| ( |
| echo "usage:" |
| echo " $prog --help Print this message." |
| echo " $prog [options] Run all tests with the given options." |
| echo " Options are all passed to run-test; refer to that for " \ |
| "further documentation:" |
| echo " --debug --dev --host --interpreter --jit --jvm --no-optimize" |
| echo " --no-verify --verify-soft-fail -O --update --zygote --64" |
| echo " --relocate --prebuild --always-clean --gcstress --gcverify" |
| echo " --trace --no-patchoat --no-dex2oat --use-java-home --pic-image" |
| echo " --pic-test --strace --debuggable --dalvik --dex2oat-swap" |
| echo " --build-only --build-with-jack --build-with-javac-dx" |
| echo " --never-clean --image --no-image --optimizing" |
| echo " --no-relocate --no-prebuild" |
| echo " Specific Runtime Options:" |
| echo " --seq Run tests one-by-one, avoiding failures caused by busy CPU" |
| ) 1>&2 |
| exit 1 |
| fi |
| |
| if [ "$sequental" == "yes" ]; then |
| i=0 |
| for test_name in *; do |
| if [ -d "$test_name" -a -r "$test_name" -a -r "$test_name/info.txt" ]; then |
| ./run-test ${run_args} "$test_name" |
| RES=$? |
| test_pids[i]=i |
| test_names[test_pids[i]]="$test_name" |
| if [ "$RES" != "0" ]; then |
| let failure_count+=1 |
| failed_test_names="$failed_test_names ${test_names[i]}" |
| else |
| let succeeded_count+=1 |
| fi |
| let i+=1 |
| fi |
| done |
| else |
| # start all the tests |
| i=0 |
| for test_name in *; do |
| if [ -d "$test_name" -a -r "$test_name" -a -r "$test_name/info.txt" ]; then |
| ./run-test ${run_args} "$test_name" & |
| test_pids[i]=$! |
| test_names[test_pids[i]]="$test_name" |
| let i+=1 |
| fi |
| done |
| |
| # wait for all the tests, collecting the failures |
| failure_count=0 |
| succeeded_count=0 |
| failed_test_names="" |
| for pid in ${test_pids[@]}; do |
| wait $pid |
| if [ "$?" != "0" ]; then |
| let failure_count+=1 |
| failed_test_names="$failed_test_names ${test_names[$pid]}[pid=$pid]" |
| else |
| let succeeded_count+=1 |
| fi |
| done |
| fi |
| |
| echo "succeeded tests: $succeeded_count" |
| echo "failed tests: $failure_count" |
| |
| for i in $failed_test_names; do |
| echo "failed: $i" |
| done |