blob: c50a9ca707aca354f39859ee8ee3ae2e6ee53fdf [file] [log] [blame]
#!/bin/bash
#
# Copyright (C) 2007 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Set up prog to be the path of this script, including following symlinks,
# and set up progdir to be the fully-qualified pathname of its directory.
prog="$0"
args="$@"
while [ -h "${prog}" ]; do
newProg=`/bin/ls -ld "${prog}"`
newProg=`expr "${newProg}" : ".* -> \(.*\)$"`
if expr "x${newProg}" : 'x/' >/dev/null; then
prog="${newProg}"
else
progdir=`dirname "${prog}"`
prog="${progdir}/${newProg}"
fi
done
oldwd=`pwd`
progdir=`dirname "${prog}"`
cd "${progdir}"
progdir=`pwd`
prog="${progdir}"/`basename "${prog}"`
test_dir="test-$$"
if [ -z "$TMPDIR" ]; then
tmp_dir="/tmp/$USER/${test_dir}"
else
tmp_dir="${TMPDIR}/${test_dir}"
fi
checker="${progdir}/../tools/checker/checker.py"
export JAVA="java"
export JAVAC="javac -g -Xlint:-options"
export RUN="${progdir}/etc/run-test-jar"
export DEX_LOCATION=/data/run-test/${test_dir}
export NEED_DEX="true"
export USE_JACK="true"
export SMALI_ARGS="--experimental"
# If dx was not set by the environment variable, assume it is in the path.
if [ -z "$DX" ]; then
export DX="dx"
fi
# If jasmin was not set by the environment variable, assume it is in the path.
if [ -z "$JASMIN" ]; then
export JASMIN="jasmin"
fi
# If smali was not set by the environment variable, assume it is in the path.
if [ -z "$SMALI" ]; then
export SMALI="smali"
fi
# If dexmerger was not set by the environment variable, assume it is in the path.
if [ -z "$DXMERGER" ]; then
export DXMERGER="dexmerger"
fi
# If jack was not set by the environment variable, assume it is in the path.
if [ -z "$JACK" ]; then
export JACK="jack"
fi
# ANDROID_BUILD_TOP is not set in a build environment.
if [ -z "$ANDROID_BUILD_TOP" ]; then
export ANDROID_BUILD_TOP=$oldwd
fi
# ANDROID_HOST_OUT is not set in a build environment.
if [ -z "$ANDROID_HOST_OUT" ]; then
export ANDROID_HOST_OUT=${OUT_DIR:-$ANDROID_BUILD_TOP/out/}host/linux-x86
fi
# If JACK_CLASSPATH is not set, assume it only contains core-libart.
if [ -z "$JACK_CLASSPATH" ]; then
export JACK_CLASSPATH="${ANDROID_HOST_OUT}/../common/obj/JAVA_LIBRARIES/core-libart-hostdex_intermediates/classes.jack:${ANDROID_HOST_OUT}/../common/obj/JAVA_LIBRARIES/core-oj-hostdex_intermediates/classes.jack"
fi
export JACK="$JACK -g -cp $JACK_CLASSPATH"
info="info.txt"
build="build"
run="run"
expected="expected.txt"
check_cmd="check"
output="output.txt"
build_output="build-output.txt"
cfg_output="graph.cfg"
strace_output="strace-output.txt"
lib="libartd.so"
testlib="arttestd"
run_args="--quiet"
build_args=""
quiet="no"
debuggable="no"
prebuild_mode="yes"
target_mode="yes"
dev_mode="no"
update_mode="no"
debug_mode="no"
relocate="yes"
runtime="art"
usage="no"
build_only="no"
suffix64=""
trace="false"
trace_stream="false"
basic_verify="false"
gc_verify="false"
gc_stress="false"
strace="false"
always_clean="no"
never_clean="no"
have_dex2oat="yes"
have_patchoat="yes"
have_image="yes"
pic_image_suffix=""
multi_image_suffix=""
android_root="/system"
bisection_search="no"
# By default we will use optimizing.
image_args=""
image_suffix=""
while true; do
if [ "x$1" = "x--host" ]; then
target_mode="no"
DEX_LOCATION=$tmp_dir
run_args="${run_args} --host"
shift
elif [ "x$1" = "x--quiet" ]; then
quiet="yes"
shift
elif [ "x$1" = "x--use-java-home" ]; then
if [ -n "${JAVA_HOME}" ]; then
export JAVA="${JAVA_HOME}/bin/java"
export JAVAC="${JAVA_HOME}/bin/javac -g"
else
echo "Passed --use-java-home without JAVA_HOME variable set!"
usage="yes"
fi
shift
elif [ "x$1" = "x--jvm" ]; then
target_mode="no"
runtime="jvm"
image_args=""
prebuild_mode="no"
NEED_DEX="false"
USE_JACK="false"
run_args="${run_args} --jvm"
build_args="${build_args} --jvm"
shift
elif [ "x$1" = "x-O" ]; then
lib="libart.so"
testlib="arttest"
run_args="${run_args} -O"
shift
elif [ "x$1" = "x--dalvik" ]; then
lib="libdvm.so"
runtime="dalvik"
shift
elif [ "x$1" = "x--no-dex2oat" ]; then
have_dex2oat="no"
shift
elif [ "x$1" = "x--no-patchoat" ]; then
have_patchoat="no"
shift
elif [ "x$1" = "x--no-image" ]; then
have_image="no"
shift
elif [ "x$1" = "x--npic-image" ]; then
pic_image_suffix="-npic"
shift
elif [ "x$1" = "x--multi-image" ]; then
multi_image_suffix="-multi"
shift
elif [ "x$1" = "x--pic-test" ]; then
run_args="${run_args} --pic-test"
shift
elif [ "x$1" = "x--relocate" ]; then
relocate="yes"
shift
elif [ "x$1" = "x--no-relocate" ]; then
relocate="no"
shift
elif [ "x$1" = "x--prebuild" ]; then
run_args="${run_args} --prebuild"
prebuild_mode="yes"
shift;
elif [ "x$1" = "x--strip-dex" ]; then
run_args="${run_args} --strip-dex"
shift;
elif [ "x$1" = "x--debuggable" ]; then
run_args="${run_args} -Xcompiler-option --debuggable"
debuggable="yes"
shift;
elif [ "x$1" = "x--no-prebuild" ]; then
run_args="${run_args} --no-prebuild"
prebuild_mode="no"
shift;
elif [ "x$1" = "x--gcverify" ]; then
basic_verify="true"
gc_verify="true"
shift
elif [ "x$1" = "x--gcstress" ]; then
basic_verify="true"
gc_stress="true"
shift
elif [ "x$1" = "x--image" ]; then
shift
image="$1"
run_args="${run_args} --image $image"
shift
elif [ "x$1" = "x-Xcompiler-option" ]; then
shift
option="$1"
run_args="${run_args} -Xcompiler-option $option"
shift
elif [ "x$1" = "x--runtime-option" ]; then
shift
option="$1"
run_args="${run_args} --runtime-option $option"
shift
elif [ "x$1" = "x--gdb-arg" ]; then
shift
gdb_arg="$1"
run_args="${run_args} --gdb-arg $gdb_arg"
shift
elif [ "x$1" = "x--debug" ]; then
run_args="${run_args} --debug"
shift
elif [ "x$1" = "x--gdb" ]; then
run_args="${run_args} --gdb"
dev_mode="yes"
shift
elif [ "x$1" = "x--strace" ]; then
strace="yes"
run_args="${run_args} --timeout 1800 --invoke-with strace --invoke-with -o --invoke-with $tmp_dir/$strace_output"
shift
elif [ "x$1" = "x--zygote" ]; then
run_args="${run_args} --zygote"
shift
elif [ "x$1" = "x--interpreter" ]; then
run_args="${run_args} --interpreter"
image_suffix="-interpreter"
shift
elif [ "x$1" = "x--jit" ]; then
image_args="--jit"
image_suffix="-interpreter"
shift
elif [ "x$1" = "x--optimizing" ]; then
image_args="-Xcompiler-option --compiler-backend=Optimizing"
shift
elif [ "x$1" = "x--no-verify" ]; then
run_args="${run_args} --no-verify"
shift
elif [ "x$1" = "x--verify-soft-fail" ]; then
image_args="--verify-soft-fail"
image_suffix="-interp-ac"
shift
elif [ "x$1" = "x--no-optimize" ]; then
run_args="${run_args} --no-optimize"
shift
elif [ "x$1" = "x--no-precise" ]; then
run_args="${run_args} --no-precise"
shift
elif [ "x$1" = "x--invoke-with" ]; then
shift
what="$1"
if [ "x$what" = "x" ]; then
echo "$0 missing argument to --invoke-with" 1>&2
usage="yes"
break
fi
run_args="${run_args} --invoke-with ${what}"
shift
elif [ "x$1" = "x--dev" ]; then
run_args="${run_args} --dev"
dev_mode="yes"
shift
elif [ "x$1" = "x--build-only" ]; then
build_only="yes"
shift
elif [ "x$1" = "x--build-with-javac-dx" ]; then
USE_JACK="false"
shift
elif [ "x$1" = "x--build-with-jack" ]; then
USE_JACK="true"
shift
elif [ "x$1" = "x--output-path" ]; then
shift
tmp_dir=$1
if [ "x$tmp_dir" = "x" ]; then
echo "$0 missing argument to --output-path" 1>&2
usage="yes"
break
fi
shift
elif [ "x$1" = "x--android-root" ]; then
shift
if [ "x$1" = "x" ]; then
echo "$0 missing argument to --android-root" 1>&2
usage="yes"
break
fi
android_root="$1"
run_args="${run_args} --android-root $1"
shift
elif [ "x$1" = "x--update" ]; then
update_mode="yes"
shift
elif [ "x$1" = "x--help" ]; then
usage="yes"
shift
elif [ "x$1" = "x--64" ]; then
run_args="${run_args} --64"
suffix64="64"
shift
elif [ "x$1" = "x--trace" ]; then
trace="true"
shift
elif [ "x$1" = "x--stream" ]; then
trace_stream="true"
shift
elif [ "x$1" = "x--always-clean" ]; then
always_clean="yes"
shift
elif [ "x$1" = "x--never-clean" ]; then
never_clean="yes"
shift
elif [ "x$1" = "x--dex2oat-swap" ]; then
run_args="${run_args} --dex2oat-swap"
shift
elif [ "x$1" = "x--instruction-set-features" ]; then
shift
run_args="${run_args} --instruction-set-features $1"
shift
elif [ "x$1" = "x--bisection-search" ]; then
bisection_search="yes"
shift
elif expr "x$1" : "x--" >/dev/null 2>&1; then
echo "unknown $0 option: $1" 1>&2
usage="yes"
break
else
break
fi
done
run_args="${run_args} ${image_args}"
# Allocate file descriptor real_stderr and redirect it to the shell's error
# output (fd 2).
if [ ${BASH_VERSINFO[1]} -ge 4 ] && [ ${BASH_VERSINFO[2]} -ge 1 ]; then
exec {real_stderr}>&2
else
# In bash before version 4.1 we need to do a manual search for free file
# descriptors.
FD=3
while [ -e /dev/fd/$FD ]; do FD=$((FD + 1)); done
real_stderr=$FD
eval "exec ${real_stderr}>&2"
fi
if [ "$quiet" = "yes" ]; then
# Force the default standard output and error to go to /dev/null so we will
# not print them.
exec 1>/dev/null
exec 2>/dev/null
fi
function err_echo() {
echo "$@" 1>&${real_stderr}
}
# tmp_dir may be relative, resolve.
#
# Cannot use realpath, as it does not exist on Mac.
# Cannot us a simple "cd", as the path might not be created yet.
# Cannot use readlink -m, as it does not exist on Mac.
# Fallback to nuclear option:
noncanonical_tmp_dir=$tmp_dir
tmp_dir="`cd $oldwd ; python -c "import os; print os.path.realpath('$tmp_dir')"`"
mkdir -p $tmp_dir
if [ "$basic_verify" = "true" ]; then
# Set HspaceCompactForOOMMinIntervalMs to zero to run hspace compaction for OOM more frequently in tests.
run_args="${run_args} --runtime-option -Xgc:preverify --runtime-option -Xgc:postverify --runtime-option -XX:HspaceCompactForOOMMinIntervalMs=0"
fi
if [ "$gc_verify" = "true" ]; then
run_args="${run_args} --runtime-option -Xgc:preverify_rosalloc --runtime-option -Xgc:postverify_rosalloc"
fi
if [ "$gc_stress" = "true" ]; then
run_args="${run_args} --gc-stress --runtime-option -Xgc:gcstress --runtime-option -Xms2m --runtime-option -Xmx16m"
fi
if [ "$trace" = "true" ]; then
run_args="${run_args} --runtime-option -Xmethod-trace --runtime-option -Xmethod-trace-file-size:2000000"
if [ "$trace_stream" = "true" ]; then
# Streaming mode uses the file size as the buffer size. So output gets really large. Drop
# the ability to analyze the file and just write to /dev/null.
run_args="${run_args} --runtime-option -Xmethod-trace-file:/dev/null"
# Enable streaming mode.
run_args="${run_args} --runtime-option -Xmethod-trace-stream"
else
run_args="${run_args} --runtime-option -Xmethod-trace-file:${DEX_LOCATION}/trace.bin"
fi
elif [ "$trace_stream" = "true" ]; then
err_echo "Cannot use --stream without --trace."
exit 1
fi
# Most interesting target architecture variables are Makefile variables, not environment variables.
# Try to map the suffix64 flag and what we find in ${ANDROID_PRODUCT_OUT}/data/art-test to an architecture name.
function guess_target_arch_name() {
grep32bit=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | grep -E '^(arm|x86|mips)$'`
grep64bit=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | grep -E '^(arm64|x86_64|mips64)$'`
if [ "x${suffix64}" = "x64" ]; then
target_arch_name=${grep64bit}
else
target_arch_name=${grep32bit}
fi
}
function guess_host_arch_name() {
if [ "x${suffix64}" = "x64" ]; then
host_arch_name="x86_64"
else
host_arch_name="x86"
fi
}
if [ "$target_mode" = "no" ]; then
if [ "$runtime" = "jvm" ]; then
if [ "$prebuild_mode" = "yes" ]; then
err_echo "--prebuild with --jvm is unsupported"
exit 1;
fi
fi
fi
if [ "$have_patchoat" = "no" ]; then
run_args="${run_args} --no-patchoat"
fi
if [ "$have_dex2oat" = "no" ]; then
run_args="${run_args} --no-dex2oat"
fi
if [ ! "$runtime" = "jvm" ]; then
run_args="${run_args} --lib $lib"
fi
if [ "$runtime" = "dalvik" ]; then
if [ "$target_mode" = "no" ]; then
framework="${ANDROID_PRODUCT_OUT}/system/framework"
bpath="${framework}/core-libart.jar:${framework}/core-oj.jar:${framework}/conscrypt.jar:${framework}/okhttp.jar:${framework}/bouncycastle.jar:${framework}/ext.jar"
run_args="${run_args} --boot --runtime-option -Xbootclasspath:${bpath}"
else
true # defaults to using target BOOTCLASSPATH
fi
elif [ "$runtime" = "art" ]; then
if [ "$target_mode" = "no" ]; then
guess_host_arch_name
run_args="${run_args} --boot ${ANDROID_HOST_OUT}/framework/core${image_suffix}${pic_image_suffix}${multi_image_suffix}.art"
run_args="${run_args} --runtime-option -Djava.library.path=${ANDROID_HOST_OUT}/lib${suffix64}:${ANDROID_HOST_OUT}/nativetest${suffix64}"
else
guess_target_arch_name
run_args="${run_args} --runtime-option -Djava.library.path=/data/nativetest${suffix64}/art/${target_arch_name}:${android_root}/lib${suffix64}"
run_args="${run_args} --boot /data/art-test/core${image_suffix}${pic_image_suffix}${multi_image_suffix}.art"
fi
if [ "$relocate" = "yes" ]; then
run_args="${run_args} --relocate"
else
run_args="${run_args} --no-relocate"
fi
elif [ "$runtime" = "jvm" ]; then
# TODO: Detect whether the host is 32-bit or 64-bit.
run_args="${run_args} --runtime-option -Djava.library.path=${ANDROID_HOST_OUT}/lib64"
fi
if [ "$have_image" = "no" ]; then
if [ "$runtime" != "art" ]; then
err_echo "--no-image is only supported on the art runtime"
exit 1
fi
if [ "$target_mode" = "no" ]; then
framework="${ANDROID_HOST_OUT}/framework"
bpath_suffix="-hostdex"
else
framework="${android_root}/framework"
bpath_suffix=""
fi
# TODO If the target was compiled WITH_DEXPREOPT=true then these tests will
# fail since these jar files will be stripped.
bpath="${framework}/core-libart${bpath_suffix}.jar"
bpath="${bpath}:${framework}/core-oj${bpath_suffix}.jar"
bpath="${bpath}:${framework}/conscrypt${bpath_suffix}.jar"
bpath="${bpath}:${framework}/okhttp${bpath_suffix}.jar"
bpath="${bpath}:${framework}/bouncycastle${bpath_suffix}.jar"
# Pass down the bootclasspath
run_args="${run_args} --runtime-option -Xbootclasspath:${bpath}"
run_args="${run_args} --no-image"
fi
if [ "$dev_mode" = "yes" -a "$update_mode" = "yes" ]; then
err_echo "--dev and --update are mutually exclusive"
usage="yes"
fi
if [ "$dev_mode" = "yes" -a "$quiet" = "yes" ]; then
err_echo "--dev and --quiet are mutually exclusive"
usage="yes"
fi
if [ "$bisection_search" = "yes" -a "$prebuild_mode" = "yes" ]; then
err_echo "--bisection-search and --prebuild are mutually exclusive"
usage="yes"
fi
if [ "$bisection_search" = "yes" -a "$have_dex2oat" = "no" ]; then
err_echo "--bisection-search and --no-dex2oat are mutually exclusive"
usage="yes"
fi
if [ "$bisection_search" = "yes" -a "$have_patchoat" = "no" ]; then
err_echo "--bisection-search and --no-patchoat are mutually exclusive"
usage="yes"
fi
if [ "$usage" = "no" ]; then
if [ "x$1" = "x" -o "x$1" = "x-" ]; then
test_dir=`basename "$oldwd"`
else
test_dir="$1"
fi
if [ '!' -d "$test_dir" ]; then
td2=`echo ${test_dir}-*`
if [ '!' -d "$td2" ]; then
err_echo "${test_dir}: no such test directory"
usage="yes"
fi
test_dir="$td2"
fi
# Shift to get rid of the test name argument. The rest of the arguments
# will get passed to the test run.
shift
fi
# For building with javac and dx always use Java 7. The dx compiler
# only support byte codes from Java 7 or earlier (class file major
# version 51 or lower).
if [ "$USE_JACK" != "true" ] && [ "$NEED_DEX" = "true" ]; then
export JAVAC="${JAVAC} -source 1.7 -target 1.7"
fi
if [ "$usage" = "yes" ]; then
prog=`basename $prog`
(
echo "usage:"
echo " $prog --help Print this message."
echo " $prog [options] [test-name] Run test normally."
echo " $prog --dev [options] [test-name] Development mode" \
"(dumps to stdout)."
echo " $prog --update [options] [test-name] Update mode" \
"(replaces expected.txt)."
echo ' Omitting the test name or specifying "-" will use the' \
"current directory."
echo " Runtime Options:"
echo " -O Run non-debug rather than debug build (off by default)."
echo " -Xcompiler-option Pass an option to the compiler."
echo " --runtime-option Pass an option to the runtime."
echo " --debug Wait for a debugger to attach."
echo " --debuggable Whether to compile Java code for a debugger."
echo " --gdb Run under gdb; incompatible with some tests."
echo " --gdb-arg Pass an option to gdb."
echo " --build-only Build test files only (off by default)."
echo " --build-with-javac-dx Build test files with javac and dx (off by default)."
echo " --build-with-jack Build test files with jack and jill (on by default)."
echo " --interpreter Enable interpreter only mode (off by default)."
echo " --jit Enable jit (off by default)."
echo " --optimizing Enable optimizing compiler (default)."
echo " --no-verify Turn off verification (on by default)."
echo " --verify-soft-fail Force soft fail verification (off by default)."
echo " Verification is enabled if neither --no-verify"
echo " nor --verify-soft-fail is specified."
echo " --no-optimize Turn off optimization (on by default)."
echo " --no-precise Turn off precise GC (on by default)."
echo " --zygote Spawn the process from the Zygote." \
"If used, then the"
echo " other runtime options are ignored."
echo " --no-dex2oat Run as though dex2oat was failing."
echo " --no-patchoat Run as though patchoat was failing."
echo " --prebuild Run dex2oat on the files before starting test. (default)"
echo " --no-prebuild Do not run dex2oat on the files before starting"
echo " the test."
echo " --strip-dex Strip the dex files before starting test."
echo " --relocate Force the use of relocating in the test, making"
echo " the image and oat files be relocated to a random"
echo " address before running. (default)"
echo " --no-relocate Force the use of no relocating in the test"
echo " --image Run the test using a precompiled boot image. (default)"
echo " --no-image Run the test without a precompiled boot image."
echo " --host Use the host-mode virtual machine."
echo " --invoke-with Pass --invoke-with option to runtime."
echo " --dalvik Use Dalvik (off by default)."
echo " --jvm Use a host-local RI virtual machine."
echo " --use-java-home Use the JAVA_HOME environment variable"
echo " to find the java compiler and runtime"
echo " (if applicable) to run the test with."
echo " --output-path [path] Location where to store the build" \
"files."
echo " --64 Run the test in 64-bit mode"
echo " --trace Run with method tracing"
echo " --strace Run with syscall tracing from strace."
echo " --stream Run method tracing in streaming mode (requires --trace)"
echo " --gcstress Run with gc stress testing"
echo " --gcverify Run with gc verification"
echo " --always-clean Delete the test files even if the test fails."
echo " --never-clean Keep the test files even if the test succeeds."
echo " --android-root [path] The path on target for the android root. (/system by default)."
echo " --dex2oat-swap Use a dex2oat swap file."
echo " --instruction-set-features [string]"
echo " Set instruction-set-features for compilation."
echo " --npic-image Use an image compiled with non-position independent code "
echo " for the boot class path."
echo " --multi-image Use a set of images compiled with dex2oat multi-image for"
echo " the boot class path."
echo " --pic-test Compile the test code position independent."
echo " --quiet Don't print anything except failure messages"
echo " --bisection-search Perform bisection bug search."
) 1>&2 # Direct to stderr so usage is not printed if --quiet is set.
exit 1
fi
cd "$test_dir"
test_dir=`pwd`
td_info="${test_dir}/${info}"
td_expected="${test_dir}/${expected}"
if [ ! -r $td_info ]; then
err_echo "${test_dir}: missing file $td_info"
exit 1
fi
if [ ! -r $td_expected ]; then
err_echo "${test_dir}: missing file $td_expected"
exit 1
fi
# copy the test to a temp dir and run it
echo "${test_dir}: building..." 1>&2
rm -rf "$tmp_dir"
cp -Rp "$test_dir" "$tmp_dir"
cd "$tmp_dir"
if [ '!' -r "$build" ]; then
cp "${progdir}/etc/default-build" build
else
cp "${progdir}/etc/default-build" .
fi
if [ '!' -r "$run" ]; then
cp "${progdir}/etc/default-run" run
else
cp "${progdir}/etc/default-run" .
fi
if [ '!' -r "$check_cmd" ]; then
cp "${progdir}/etc/default-check" check
else
cp "${progdir}/etc/default-check" .
fi
chmod 755 "$build"
chmod 755 "$run"
chmod 755 "$check_cmd"
export TEST_NAME=`basename ${test_dir}`
# arch_supports_read_barrier ARCH
# -------------------------------
# Return whether the Optimizing compiler has read barrier support for ARCH.
function arch_supports_read_barrier() {
# Optimizing has read barrier support for ARM, ARM64, x86 and x86-64 at the
# moment.
[ "x$1" = xarm ] || [ "x$1" = xarm64 ] || [ "x$1" = xx86 ] || [ "x$1" = xx86_64 ]
}
# Tests named '<number>-checker-*' will also have their CFGs verified with
# Checker when compiled with Optimizing on host.
if [[ "$TEST_NAME" =~ ^[0-9]+-checker- ]]; then
if [ "$runtime" = "art" -a "$image_suffix" = "" -a "$USE_JACK" = "true" ]; then
# Optimizing has read barrier support for certain architectures
# only. On other architectures, compiling is disabled when read
# barriers are enabled, meaning that we do not produce a CFG file
# as a side-effect of compilation, thus the Checker assertions
# cannot be checked. Disable Checker for those cases.
#
# TODO: Enable Checker when read barrier support is added to more
# architectures (b/12687968).
if [ "x$ART_USE_READ_BARRIER" = xtrue ] \
&& (([ "x$host_mode" = "xyes" ] \
&& ! arch_supports_read_barrier "$host_arch_name") \
|| ([ "x$target_mode" = "xyes" ] \
&& ! arch_supports_read_barrier "$target_arch_name")); then
run_checker="no"
# In no-prebuild mode, the compiler is only invoked if both dex2oat and
# patchoat are available. Disable Checker otherwise (b/22552692).
elif [ "$prebuild_mode" = "yes" ] \
|| [ "$have_patchoat" = "yes" -a "$have_dex2oat" = "yes" ]; then
run_checker="yes"
if [ "$target_mode" = "no" ]; then
cfg_output_dir="$tmp_dir"
checker_args="--arch=${host_arch_name^^}"
else
cfg_output_dir="$DEX_LOCATION"
checker_args="--arch=${target_arch_name^^}"
fi
if [ "$debuggable" = "yes" ]; then
checker_args="$checker_args --debuggable"
fi
run_args="${run_args} -Xcompiler-option --dump-cfg=$cfg_output_dir/$cfg_output \
-Xcompiler-option -j1"
fi
fi
fi
run_args="${run_args} --testlib ${testlib}"
# To cause tests to fail fast, limit the file sizes created by dx, dex2oat and ART output to 2MB.
build_file_size_limit=2048
run_file_size_limit=2048
# Add tests requiring a higher ulimit to this list. Ulimits might need to be raised to deal with
# large amounts of expected output or large generated files.
if echo "$test_dir" | grep -Eq "(083|089|961|964|971)" > /dev/null; then
build_file_size_limit=5120
run_file_size_limit=5120
fi
if [ "$run_checker" = "yes" -a "$target_mode" = "yes" ]; then
# We will need to `adb pull` the .cfg output from the target onto the host to
# run checker on it. This file can be big.
build_file_size_limit=24576
run_file_size_limit=24576
fi
if [ ${USE_JACK} = "false" ]; then
# Set ulimit if we build with dx only, Jack can generate big temp files.
if ! ulimit -S "$build_file_size_limit"; then
err_echo "ulimit file size setting failed"
fi
fi
good="no"
good_build="yes"
good_run="yes"
if [ "$dev_mode" = "yes" ]; then
"./${build}" $build_args 2>&1
build_exit="$?"
echo "build exit status: $build_exit" 1>&2
if [ "$build_exit" = '0' ]; then
if ! ulimit -S "$run_file_size_limit"; then
err_echo "ulimit file size setting failed"
fi
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" 2>&1
run_exit="$?"
if [ "$run_exit" = "0" ]; then
if [ "$run_checker" = "yes" ]; then
if [ "$target_mode" = "yes" ]; then
adb pull $cfg_output_dir/$cfg_output &> /dev/null
fi
"$checker" $checker_args "$cfg_output" "$tmp_dir" 2>&1
checker_exit="$?"
if [ "$checker_exit" = "0" ]; then
good="yes"
fi
err_echo "checker exit status: $checker_exit"
else
good="yes"
fi
fi
echo "run exit status: $run_exit" 1>&2
fi
elif [ "$update_mode" = "yes" ]; then
"./${build}" $build_args >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" = '0' ]; then
if ! ulimit -S "$run_file_size_limit"; then
err_echo "ulimit file size setting failed"
fi
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" >"$output" 2>&1
if [ "$run_checker" = "yes" ]; then
if [ "$target_mode" = "yes" ]; then
adb pull $cfg_output_dir/$cfg_output &> /dev/null
fi
"$checker" -q $checker_args "$cfg_output" "$tmp_dir" >> "$output" 2>&1
fi
sed -e 's/[[:cntrl:]]$//g' < "$output" >"${td_expected}"
good="yes"
else
cat "$build_output" 1>&${real_stderr} 1>&2
err_echo "build exit status: $build_exit"
fi
elif [ "$build_only" = "yes" ]; then
good="yes"
"./${build}" $build_args >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" '!=' '0' ]; then
cp "$build_output" "$output"
echo "build exit status: $build_exit" >>"$output"
diff --strip-trailing-cr -q "$expected" "$output" >/dev/null
if [ "$?" '!=' "0" ]; then
good="no"
err_echo "BUILD FAILED For ${TEST_NAME}"
fi
fi
# Clean up extraneous files that are not used by tests.
find $tmp_dir -mindepth 1 ! -regex ".*/\(.*jar\|$output\|$expected\)" | xargs rm -rf
exit 0
else
"./${build}" $build_args >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" = '0' ]; then
if ! ulimit -S "$run_file_size_limit"; then
err_echo "ulimit file size setting failed"
fi
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" >"$output" 2>&1
run_exit="$?"
if [ "$run_exit" != "0" ]; then
err_echo "run exit status: $run_exit"
good_run="no"
elif [ "$run_checker" = "yes" ]; then
if [ "$target_mode" = "yes" ]; then
adb pull $cfg_output_dir/$cfg_output &> /dev/null
fi
"$checker" -q $checker_args "$cfg_output" "$tmp_dir" >> "$output" 2>&1
checker_exit="$?"
if [ "$checker_exit" != "0" ]; then
err_echo "checker exit status: $checker_exit"
good_run="no"
else
good_run="yes"
fi
else
good_run="yes"
fi
else
good_build="no"
cp "$build_output" "$output"
echo "Failed to build in tmpdir=${tmp_dir} from oldwd=${oldwd} and cwd=`pwd`" >> "$output"
echo "Non-canonical tmpdir was ${noncanonical_tmp_dir}" >> "$output"
echo "Args: ${args}" >> "$output"
echo "build exit status: $build_exit" >> "$output"
max_name_length=$(getconf NAME_MAX ${tmp_dir})
echo "Max filename (NAME_MAX): ${max_name_length}" >> "$output"
max_path_length=$(getconf PATH_MAX ${tmp_dir})
echo "Max pathlength (PATH_MAX): ${max_path_length}" >> "$output"
fi
./$check_cmd "$expected" "$output"
if [ "$?" = "0" ]; then
if [ "$good_build" = "no" -o "$good_run" = "yes" ]; then
# output == expected
good="yes"
echo "${test_dir}: succeeded!" 1>&2
fi
fi
fi
(
if [ "$good" != "yes" -a "$update_mode" != "yes" ]; then
echo "${test_dir}: FAILED!"
echo ' '
echo '#################### info'
cat "${td_info}" | sed 's/^/# /g'
echo '#################### diffs'
diff --strip-trailing-cr -u "$expected" "$output" | tail -n 3000
echo '####################'
if [ "$strace" = "yes" ]; then
echo '#################### strace output'
tail -n 3000 "$tmp_dir/$strace_output"
echo '####################'
fi
echo ' '
fi
) 2>&${real_stderr} 1>&2
# Attempt bisection only if the test failed.
if [ "$bisection_search" = "yes" -a "$good" != "yes" ]; then
# Bisecting works by skipping different optimization passes which breaks checker assertions.
if [ "$run_checker" == "yes" ]; then
echo "${test_dir}: not bisecting, checker test." 1>&2
else
# Increase file size limit, bisection search can generate large logfiles.
if ! ulimit -S unlimited; then
err_echo "ulimit file size setting failed"
fi
echo "${test_dir}: bisecting..." 1>&2
cwd=`pwd`
maybe_device_mode=""
raw_cmd=""
if [ "$target_mode" = "yes" ]; then
# Produce cmdline.sh in $DEX_LOCATION. "$@" is passed as a runtime option
# so that cmdline.sh forwards its arguments to dalvikvm. invoke-with is set
# to exec in order to preserve pid when calling dalvikvm. This is required
# for bisection search to correctly retrieve logs from device.
"./${run}" $run_args --runtime-option '"$@"' --invoke-with exec --dry-run "$@" &> /dev/null
adb shell chmod u+x "$DEX_LOCATION/cmdline.sh"
maybe_device_mode="--device"
raw_cmd="$DEX_LOCATION/cmdline.sh"
else
raw_cmd="$cwd/${run} --external-log-tags $run_args $@"
fi
$ANDROID_BUILD_TOP/art/tools/bisection_search/bisection_search.py \
$maybe_device_mode \
--raw-cmd="$raw_cmd" \
--check-script="$cwd/check" \
--expected-output="$cwd/expected.txt" \
--timeout=300
fi
fi
# Clean up test files.
if [ "$always_clean" = "yes" -o "$good" = "yes" ] && [ "$never_clean" = "no" ]; then
cd "$oldwd"
rm -rf "$tmp_dir"
if [ "$target_mode" = "yes" -a "$build_exit" = "0" ]; then
adb shell rm -rf $DEX_LOCATION
fi
if [ "$good" = "yes" ]; then
exit 0
fi
fi
(
if [ "$always_clean" = "yes" ]; then
echo "${TEST_NAME} files deleted from host "
if [ "$target_mode" == "yes" ]; then
echo "and from target"
fi
else
echo "${TEST_NAME} files left in ${tmp_dir} on host"
if [ "$target_mode" == "yes" ]; then
echo "and in ${DEX_LOCATION} on target"
fi
fi
) 2>&${real_stderr} 1>&2
if [ "$never_clean" = "yes" ] && [ "$good" = "yes" ]; then
exit 0
else
exit 1
fi